ASTM E1602-94
Historical Standard: ASTM E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
SUPERSEDED (see Active link, below)
ASTM E1602
1. Scope
1.1 This guide covers the design and construction of solid fuel burning masonry heaters. It provides dimensions for site constructed masonry heater components and clearances that have been derived by experience and found to be consistent with the safe installation of those masonry heaters.
1.2 Values given in SI units are to be regarded as standard. Inch/pound units may be rounded (see IEEE/ASTM SI-10). All dimensions are nominal unless specifically stated otherwise. All clearances listed in this guide are actual dimensions.
1.3 This guide applies to the design and construction of masonry heaters built on-site with the components and materials specified herein. It does not apply to the construction/installation requirements for component systems that have been safety tested and listed. The requirements for listed masonry heater systems are specified in the manufacturer's installation instructions.
1.4 The design and construction of solid fuel burning masonry heaters shall comply with applicable building codes.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C11 Terminology Relating to Gypsum and Related Building Materials and Systems
C43 Terminology of Structural Clay Products
C71 Terminology Relating to Refractories
C270 Specification for Mortar for Unit Masonry
C401 Classification of Alumina and Alumina-Silicate Castable Refractories
E136 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750C
UL Standards
UL103 Chimneys, Factory Built Residential Type and Building Heating AppliancesKeywords
brick; Contraflow; firebrick; fire clay mortar; Grundofen; Kachelofen; Kakelugn; masonry heater; mortar; refractory mortar; Russian; soapstone refractory mortar; Solid fuel-burning masonry heaters; Construction; Contraflow; Brick; Firebrick; Fire clay mortar; Grundofen; Kachelofen/Kakelugn; Masonry heater; Mortar; Refractory mortar; Russian; Soapstone refractory mortar;
ICS Code
ICS Number Code 25.180.20 (Fuel furnaces)
DOI: 10.1520/E1602-94
ASTM International is a member of CrossRef.