Abstract
This consumer safety specification is intended to address incidents reported by the U.S. Consumer Product Safety Commission (CPSC) relating to frame child carriers. In response to the
incident data compiled by the CPSC, this consumer safety specification attempts to minimize the hazards associated with these products from the following: occupant retention, structural
integrity, and deficiency of consumer education regarding product use. This consumer safety specification is intended to deal with reasonably foreseeable use and misuse of the products.
Performance requirements of the frame child carriers shall be determined by subjecting them to the following tests: leg opening test, dynamic strength test, static load test, stability test,
locking device test, unintentional folding test, and removal of protective components test such as torque test and tension test. Instructions shall be provided with the product and shall be
easy to read and understand. Instructions for assembly, use, maintenance, and cleaning of the product, and warnings, where applicable, shall be included.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for
its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of frame child carriers.
1.2 This consumer safety specification is intended to minimize the risk of injury to a child from the normal use and reasonably foreseeable misuse of these products.
1.3 For purposes of definition, a frame child carrier is a product, normally of sewn fabric construction on a tubular metal or other frame, which is designed to carry a child, in an upright
position, on the back of the caregiver. A frame child carrier is intended for use with a child that is able to sit upright unassisted and weigh between 16 lb (7.3 kg) and up to 40 lb (18.1
kg). The frame child carrier is intended to be worn on the back of the caregiver's body, with the carrier, and thus the child, suspended from both shoulders of the caregiver. The seated
position of the child is either facing towards or away from the caregiver.
1.4 No frame child carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it
complies with all of the requirements contained herein.
1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the
frame child carrier is in use.
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and
are not considered standard.
1.7 The following precautionary caveat pertains only to the test method portion, Section 7 of this consumer safety specification. This standard
may involve the use of hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D3359 Test Methods for Measuring Adhesion by Tape Test
F963 Consumer Safety Specification for Toy Safety
EN Standard
EN13209 Child Use and Care Articles (Child Carriers Safety Requirements and Test Methods)
Federal Regulations
16CFR1303 Ban of Lead Containing Paint and Certain Consumer Products Bearing Lead-Containing Paint
Other Document
CAMIInfantDummy,Mark (see )
Keywords
frame child carrier; Children's equipment/safety; Consumer products--specifications; Consumer safety specifications (infants/children); Frame child carrier; Infant
materials/applications--specifications;
ICS Code
ICS Number Code 97.190 (Equipment for children)
DOI: 10.1520/F2549-09A
ASTM International is a member of CrossRef.
ASTM F2549