ASTM D5751-99
Historical Standard: ASTM D5751-99 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
SUPERSEDED (see Active link, below)
ASTM D5751
1. Scope
1.1 This specification covers performance levels for adhesives to be used in laminate joints in nonstructural lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. This specification is to be used to evaluate adhesives as well as the adhesive bonds in nonstructural-glued-lumber products.
Note 1-This specification supersedes the laminate-joint portion of Specification D3110. Note 2-See 3.2.1 and 3.2.2 for descriptions of a dry-use-nonstructural adhesive and a wet-use-nonstructural adhesive.1.2 This specification applies to laminate-joint specimens made under both laboratory and field conditions. See Section 4 for limitations in using this specification to evaluate industrially manufactured laminate joint products.
1.3 The following safety caveat applies only to the apparatus and test methods portions, Sections 6, 7, 8, and 9 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 The values stated in inch-pound units are to be regarded as standard.
1.5 In this specification, laminate joint refers to both face and edge joints.
1.6 The following index is provided as a guide to the test methods in this specification:
Section Apparatus 6 Conditioning 7 Material and Preparation of Assemblies and Specimens 8 Exposure Conditions and Treatments 9 Testing, Calculation, and Reporting 10
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D905 Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
D907 Terminology of Adhesives
D2016 Methods of Test for Moisture Content of Wood
D2555 Practice for Establishing Clear Wood Strength Values
D3110 Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products
D5266 Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
E4 Practices for Force Verification of Testing Machines
E6 Terminology Relating to Methods of Mechanical Testing
E41 Terminology Relating To Conditioning
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Keywords
bonded; dry-use-nonstructural adhesive; edge joint; face joint; laminate joint; nonstructural lumber; wet-use adhesive;
ICS Code
ICS Number Code 83.180 (Adhesives)
DOI: 10.1520/D5751-99
ASTM International is a member of CrossRef.