ASTM C1071-98
Historical Standard: ASTM C1071-98 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
SUPERSEDED (see Active link, below)
ASTM C1071
1. Scope
1.1 This specification covers fibrous glass insulation used as a thermal and sound absorbing liner for interior surfaces of ducts, plenums, and other air handling equipment that handle air up to 250 o F (121 o C).
1.2 The values stated in inch-pound units are the standard. The SI values in parentheses are for information only.
1.3
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C167 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 Terminology Relating to Thermal Insulation
C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C390 Practice for Sampling and Acceptance of Thermal Insulation Lots
C411 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C423 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C665 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C1104/C1104M Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1304 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1338 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
E84 Test Method for Surface Burning Characteristics of Building Materials
E795 Practices for Mounting Test Specimens During Sound Absorption Tests
E2231 Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G22 Practice for Determining Resistance of Plastics to Bacteria
Keywords
duct; duct lining; fibrous glass; plenum; sound absorbing insulation; thermal insulation; Acoustical materials/applications--specifications; Air analysis; Airflow performance; Ducts/duct liners; Fire-resistant materials/testing--specifications; Flexural testing--masonry units; Plenums; Thermal insulating materials--specifications; Thermal insulating materials (lining)
ICS Code
ICS Number Code 91.120.10 (Thermal insulation of buildings); 91.120.20 (Acoustics in buildings. Sound insulation)
DOI: 10.1520/C1071-98
ASTM International is a member of CrossRef.