ASTM B86-04
Historical Standard: ASTM B86-04 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
SUPERSEDED (see Active link, below)
ASTM B86
1. Scope
1.1 This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in . Seven alloy compositions are specified and designated as follows:
See , Footnote BSAE Specification, Nos. 903 and 925 conform to the requirements for alloys AG40A and AC41A, respectively.
| UNS | ASTM | Common | Traditional |
| Z33520 | AG 40A | Alloy 3 | Zamak 3 |
| Z33523 | AG 40B | Alloy 7 | Zamak 7 |
| Z35531 | AC 41A | Alloy 5 | Zamak 5 |
| Z35541 | AC 43A | Alloy 2 | Zamak 2 |
| Z35636 | ZA-8 | ||
| Z35631 | ZA-12 | ||
| Z35841 | ZA-27 | ||
1.2 Zinc Alloys Z33520, Z33523, Z35531, and Z35541 are used primarily in the manufacture of pressure die castings. Zinc-Aluminum Alloys Z35636, Z35631, and Z35841 are used in the manufacture of both foundry and pressure die castings. These alloys are also fabricated into continuous cast bar stock used for prototyping and screw machine stock.
1.3 The values stated in inch-pound units are to be regarded as the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
Military Standard
MIL-STD-129 Marking for Shipment and Storage (Military Agencies)Military Specification
MIL-P-116 Methods of PreservationFederal Standard
Fed. Std. No. 123 Marking for Shipment (Civil Agencies)ASTM Standards
B240 Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B275 Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B899 Terminology Relating to Non-ferrous Metals and Alloys
B949 Specification for General Requirements for Zinc and Zinc Alloy Products
E8 Test Methods for Tension Testing of Metallic Materials
E23 Test Methods for Notched Bar Impact Testing of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E88 Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E634 Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
Keywords
bar stock; castings; concast; continuous cast bar stock; die castings; foundry castings; permanent mold castings; pressure die castings; prototyping; sand castings; ZA alloys; Zamak; zinc; zinc-aluminum alloys; zinc metal;
ICS Code
ICS Number Code 77.150.60 (Lead, zinc and tin products)
DOI: 10.1520/B0086-04
ASTM International is a member of CrossRef.
