ASTM B247M-02a
Historical Standard: ASTM B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
SUPERSEDED (see Active link, below)
ASTM B247M
1. Scope
1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables.
Note 1 -- Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.
Note 2--For forging stock supplied as rolled or cold-finished bar or rod see Specification B211M. For forging stock supplied as extruded bar or rod see Specification B221M.
1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those Table 1 of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.
1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.
1.4 This specification is the metric counterpart of Specification B247
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this specification.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B211 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B247 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B557M Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B594 Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B660 Practices for Packaging/Packing of Aluminum and Magnesium Products
B881 Terminology Relating to Aluminum- and Magnesium-Alloy Products
B918 Practice for Heat Treatment of Wrought Aluminum Alloys
E10 Test Method for Brinell Hardness of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E34 Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E165 Practice for Liquid Penetrant Examination for General Industry
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E607 Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
E716 Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
E1004 Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
E1251 Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
G47 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ANSI Standard
H35.1/H35.1(M) Alloy and Temper Designation Systems Available from Aluminum Association, Inc., 1525 Wilson Blvd., Suite 600, Arlington, VA 22209, http://www.aluminum.org.ISO Standards
ISO2107:1983 Aluminum, Magnesium and their Alloys--Temper DesignationsMilitary Standards
MIL-STD-129 Marking for Shipment and Storage Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil. (referenced in MIL-STD-649 and applies only to direct shipments to Department of Defense agencies)SAE
AMS2772 Heat Treatment of Aluminum Alloy Raw Materials Available from Society of Automotive Engineers (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001, http://www.sae.org.Federal Standard
Fed.Std.No.123 Marking for Shipment (Civil Agencies)National Aerospace Standard
NAS410 Certification and Qualification of Nondestructive Test Personnel Available from Aerospace Industries Association of America, Inc. (AIA), 1000 Wilson Blvd., Suite 1700, Arlington, VA 22209-3928, http://www.aia-aerospace.org.Other Standards
CENEN14242 Aluminum and Aluminum Alloys, Chemical Analysis. Inductively Coupled Plasma Optical Emission Spectral Analysis Available from European Committee for Standardization (CEN), 36 rue de Stassart, B-1050, Brussels, Belgium, http://www.cen.eu/esearch.Keywords
aluminum alloy; die forgings; hand forgings; rolled ring forgings; Aluminum--specifications; Aluminum alloys--specifications; Die forgings--specifications; Hand forgings--specifications; Rolled ring forgings; UNS A91100 (Wr. alum. alloy); UNS A92014 (Wr. alum. alloy, heat treatable); UNS A92018 (Wr. alum. alloy, heat treatable); UNS A92025 (Wr. alum. alloy, heat treatable); UNS A92218 (Wr. alum. alloy, heat treatable); UNS A92219 (Wr. alum. alloy, heat treatable); UNS A92618 (Wr. alum. alloy, heat treatable); UNS A93003 (Wr. alum. alloy); UNS A94032 (Wr. alum. alloy, heat treatable); UNS A95083 (Wr. alum. alloy); UNS A96061 (Wr. alum. alloy); UNS A96066 (Wr. alum. alloy, heat treatable); UNS A96151 (Wr. alum. alloy, heat treatable); UNS A97049 (Wr. alum. alloy, heat treatable); UNS A97050 (Wr. alum. alloy, heat treatable); UNS A97075 (Wr. alum. alloy, heat treatable); UNS A97076 (Wr. alum. alloy, heat treatable); UNS A97175 (Wr. alum. alloy, heat treatable);
ICS Code
ICS Number Code 77.150.10 (Aluminium products)
DOI: 10.1520/B0247M-02A
ASTM International is a member of CrossRef.