ASTM E351-93(2006)
Historical Standard: ASTM E351-93(2006) Standard Test Methods for Chemical Analysis of Cast Iron-All Types
SUPERSEDED (see Active link, below)
ASTM E351
1. Scope
1.1 These test methods cover the chemical analysis of pig iron, gray cast iron (including alloy and austenitic), white cast iron, malleable cast iron, and ductile (nodular) iron having chemical compositions within the following limits:
1.2 The test methods in this standard are contained in the sections indicated below:
1.3 Procedures for the determination of several elements not included in these test methods can be found in Test Methods E 30 and Test Methods E 1019.
1.4 Some of the concentration ranges given in are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.
1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E 380 are also used.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section and in special 'Warning' paragraphs throughout these Methods.
1.6 This test method covers the determination of manganese in concentrations from 0.10 to 2.00 %.
1.7 This method covers the determination of phosphorus in concentrations from 0.02 to 0.90 %.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1193 Specification for Reagent Water
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron. Withdrawn. The last approved version of this historical standard is referenced on www.astm.org.
E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E60 Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E173 Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals
E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E352 Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1024 Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
E1806 Practice for Sampling Steel and Iron for Determination of Chemical Composition
Keywords
atomic absorption; carbon content; cast iron; cerium; chromium; cobalt; combustion analysis; copper; graphitic carbon; gravimetric; infrared absorption; ion exchange; lanthanum; lead; magnesium; manganese; molybdenum; nickel; phosphorus; silicon; spectrophotometric; sulfur; tin; titanium; titrimetric; vanadium;
ICS Code
ICS Number Code 77.040.30 (Chemical analysis of metals)
DOI: 10.1520/E0351-93R06
ASTM International is a member of CrossRef.