PUBLISHERS:
STATES CODES:
|
BHMA Codes & Standards
|
Subscription Price:
$590.00 / year
Publisher:
BHMA
iincludes:
ANSI/BHMA A156.1 American National Standard For Butts And Hinges / 2006
ANSI/BHMA A156.2 American National Standard For Bored And Preassembled Locks And Latches / 2003
ANSI/BHMA A156.3 American National Standard For Exit Devices / 2008
ANSI/BHMA A156.4 American National Standard For Door Controls - Closers / 2008
ANSI/BHMA A156.5 American...
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2007
Requirements in this Standard apply to power assist doors, low energy power operated doors or low energy power open doors for pedestrian use, and some small vehicular use and not provided for in ANSI/BHMA A156.10 for Power Operated Pedestrian Doors. Included are provisions intended to reduce the chance of user injury or entrapment.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2008
Contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2003
This Standard contains requirements for cabinet hardware and includes hinges, knobs, pulls, catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. Included are performance tests covering operational, cyclical, strength, and finish criteria.
Tests described in this Standard are performed under laboratory conditions. In actual...
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2005
Requirements in this Standard apply to power operated doors for pedestrian use, which open automatically when approached by pedestrians and some small vehicular traffic or by a knowing act. Included are provisions to reduce the chance of user injury or entrapment. Power operated doors for industrial or trained traffic are not covered in this Standard. Where this Standard contains...
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2008
Provides requirements for exit devices. Included are cycle, operational, strength and finish tests. Functions and types are described and numbered.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2004
This Standard establishes requirements for Self Closing Hinges & Pivots. Cycle tests, operational tests, finish tests, material and dimensional requirements are included.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2006
Provides cyclical, lateral, and vertical wear tests, together with finish tests requiring salt spray exposures. Individual hinge types are described and identified with code numbers.
|
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2011
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2001
This portion of ANSI/BHMA A156.5 establishes requirements for Auxiliary Bored and Mortise Locks, Rim Locks, Cylinders and Push Button Mechanisms and includes security tests, operational tests, finish tests, and dimensional criteria.
Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and...
|
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2010
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2005
This Standard contains requirements for door protection plates, door edgings, push plates, door pulls, push bars, and pull bars. Included are strength and finish tests, and dimensional and material criteria.
Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2009
The purpose of this Standard is to establish nationally recognized dimensions for builders template hinges which are used on metal doors and frames. This Standard is intended to assure the interchangeability of template hinges and to provide a uniform method for template identification.
|
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2010
|
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2010
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2005
Requirements for Interconnected Locks and Latches and includes performance tests, security tests, operational tests, finish tests and dimensional criteria. Functions are described and identified with numbers.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2005
This Standard establishes requirements for Mortise Locks and Latches and includes operational tests, security tests, cycle tests, finish tests, material evaluation tests and dimensional criteria.
Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
When...
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2007
This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, abuse, durability static load, smoothness, static friction, kinetic friction and finish tests are included. Hardware for light to very heavy doors is covered including both residential and industrial applications.
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2006
ANSI/BHMA A156.15 covers requirements that apply to door closers combined with hold-open devices or free-swinging door closers combined with releasing devices and includes performance tests covering operational and strength criteria.
Changes made to this version of A156.15 included improving the format to make the test sequences easier to follow, as well as specific changes to the Closing...
|
|
Subscription Price:
$20.00 / year
Publisher:
BHMA
Edition:
2008
This Standard establishes requirements for auxiliary hardware and includes performance tests covering operational, cyclical, strength or finish criteria.
Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions.
|
|
View Cart
(0 subscriptions)
