1. Scope

1.1 This guide describes various direct push ground water monitoring wells and provides guidance on their selection and installation for obtaining representative ground water samples and monitoring water table elevations. Direct push wells are used extensively for monitoring ground water quality in unconsolidated formations. This guide also includes discussion of some groundwater sampling devices which can be permanently emplaced as monitoring wells.

1.2 This guide does not address the single event sampling of ground water using direct push water samplers as presented in Guide D 6001. The methods in this guide are often used with other tests such as direct push soil sampling (Guide D 6282) and the cone penetrometer test (Guide D 6067). The present guide does not address the installation of monitoring wells by rotary drilling methods such as those presented in Practice D 5092. Techniques for obtaining ground water samples from monitoring wells are covered in Guide D 4448.

1.3 The installation of direct push ground water monitoring wells is limited to unconsolidated soils and sediments including clays, silts, sands, and some gravels and cobbles. Penetration may be limited, or damage may occur to equipment, in certain subsurface conditions; some of which are discussed in . Information in this guide is limited to ground water monitoring in the saturated zone.

1.4 This guide does not purport to comprehensively address all of the methods and issues associated with monitoring well installation. Users should seek input from qualified professionals for the selection of proper equipment and methods that would be the most successful for their site conditions. Other methods may be available for monitoring well installation, and qualified professionals should have flexibility to exercise judgement concerning alternatives not covered in this guide. The practice described in this guide is current at the time of issue; however, new, alternative, and innovative methods may become available prior to revisions. Therefore, users should consult with manufacturers or producers prior to specifying program requirements.

1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgement. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word 'Standard' in the title of this document means only that the document has been approved through the ASTM consensus process.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D653 Terminology Relating to Soil, Rock, and Contained Fluids

D4448 Guide for Sampling Ground-Water Monitoring Wells

D4750 Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)

D5088 Practice for Decontamination of Field Equipment Used at Waste Sites

D5092 Practice for Design and Installation of Ground Water Monitoring Wells

D5254 Practice for Minimum Set of Data Elements to Identify a Ground-Water Site

D5299 Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

D5434 Guide for Field Logging of Subsurface Explorations of Soil and Rock

D5474 Guide for Selection of Data Elements for Ground-Water Investigations

D5521 Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers

D5730 Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water

D6001 Guide for Direct-Push Ground Water Sampling for Environmental Site Characterization

D6067 Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

D6282 Guide for Direct Push Soil Sampling for Environmental Site Characterizations

D6286 Guide for Selection of Drilling Methods for Environmental Site Characterization

D6452 Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations

D6564 Guide for Field Filtration of Ground-Water Samples

D6634 Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells

D6771 Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations

Keywords

direct push; groundwater; monitoring well; site investigation: Direct push sampling; Driven wellpoint; Environmental site assessment (ESA); Ground-water monitoring/sampling; Installation--ground water/subsurface devices/applications; Jelled wellpoint; Protected screen technique;

ICS Code

ICS Number Code 13.060.10 (Water of natural resources)

DOI: 10.1520/D6724-01

ASTM International is a member of CrossRef.