1. Scope

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories.

1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.

1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern.

1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values.

1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (seeAppendix X2).

1.5 The various application systems are located in the following sections:

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.7 The following precautionary caveat pertains only to Sections 6-24. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.7.1 For specific precautionary statements, see 4.1.1, 4.1.2, and 22.5.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C11 Terminology Relating to Gypsum and Related Building Materials and Systems

C475/C475M Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

C514 Specification for Nails for the Application of Gypsum Board

C557 Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

C645 Specification for Nonstructural Steel Framing Members

C754 Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

C920 Specification for Elastomeric Joint Sealants

C954 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

C1002 Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C1007 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

C1047 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

C1396/C1396M Specification for Gypsum Board

C1546 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

U.S. Department of Commerce Publication

ANSI Standard

Keywords

ceiling; gypsum; wallboard; walls ; Gypsum products--specifications; Installation--gypsum products

ICS Code

ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

DOI: 10.1520/C0840-08

ASTM International is a member of CrossRef.