Significance and Use

The standardization of decommissioning plans will provide the nuclear facility owner with a greater assurance that all basic planning elements and requirements have been identified, examined, and addressed.

In applying the guidance contained in this standard, the nuclear facility owner will address the significant subject areas necessary to describe a comprehensive decommissioning plan. Additional guidance on the planning of decommissioning projects, and the preparation of decommissioning plans can be found in such references as NUREG-1757 on decommissioning standard review plans, and Regulatory Guide 1.179 on the format and content of license termination plans. Recent new guidance on all aspects of decommissioning is contained in an ASME publication titled The Decommissioning Handbook.

1. Scope

1.1 This guide applies to decommissioning plans for any nuclear facility whose operation was (is) governed by Nuclear Regulatory Commission (NRC) or Agreement State license, or under Department of Energy (DOE) orders.

1.2 The guide applies to the preparation and content of the decommissioning plan document itself.

1.3 The detailed description and development of implementation plans identified in Section 4 is outside the scope of this guide.

Note 1Nuclear facilities operated by the U.S. DOE are not licensed by the U.S. NRC, nor are other nuclear facilities which may come under the control of the U.S. Department of Defense or individual agreement states. The references in this guide to licensee, U.S. NRC Regulatory guides, and Title 10 of the U.S. Code of Federal Regulations are to imply appropriate alternative nomenclature with respect to DOE, DOD, or agreement state nuclear facilities. This distinction should not alter the content of decommissioning plans for nuclear facilities.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E1034 Specification for Nuclear Facility Transient Worker Records

E1167 Guide for Radiation Protection Program for Decommissioning Operations

E1168 Guide for Radiological Protection Training for Nuclear Facility Workers

E1760 Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity

E1819 Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities

E1893 Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls

E2216 Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning

E2420 Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities

E2421 Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities

Keywords

decommissioning operations; decommissioning plans; decommissioning project planning;

ICS Code

ICS Number Code 27.120.20 (Nuclear power plants. Safety)

DOI: 10.1520/E1281-10

ASTM International is a member of CrossRef.

ASTM E1281