Translated Standard: Russian
more info

1. Scope

1.1 This practice covers procedures for manually obtaining representative samples of petroleum products of a liquid, semi-liquid, or solid state whose vapor pressure at ambient conditions is below 101 kPa (14.7 psia). If sampling is for the precise determination of volatility, use Practice D 5842 (API MPMS Chapter 8.4) in conjunction with this practice. For sample mixing and handling of samples, refer to Practice D 5854 (API MPMS Chapter 8.3). The practice does not cover sampling of electrical insulating oils and hydraulic fluids. A summary of the manual sampling procedures and their applications is presented in Table 1.

Note 1 - The procedures described in this practice may also be applicable in sampling most noncorrosive liquid industrial chemicals, provided that all safety precautions specific to these chemicals are strictly followed.

Note 2 - The procedure for sampling liquefied petroleum gases is described in Practice D 1265; the procedure for sampling fluid power hydraulic fluids is covered in ANSI B93.19 and B93.44; the procedure for sampling insulating oils is described in Practice D 923; and the procedure for sampling natural gas is described in Test Method D 1145.

The procedure for special fuel samples for trace metal analysis is described in an appendix to Specification D 2880.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure

D217 Test Methods for Cone Penetration of Lubricating Grease

D244 Test Methods and Practices for Emulsified Asphalts

D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D346 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D873 Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D923 Practices for Sampling Electrical Insulating Liquids

D977 Specification for Emulsified Asphalt

D1145 Test Method for Sampling Natural Gas

D1265 Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

D1856 Test Method for Recovery of Asphalt From Solution by Abson Method

D2172 Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

D2880 Specification for Gas Turbine Fuel Oils

D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products (API MPMS Chapter 8.2)

D4306 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4865 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D5842 Practice for Sampling and Handling of Fuels for Volatility Measurement (API MPMS Chapter 8.4)

D5854 Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (API MPMS Chapter 8.3)

American National Standards

API Standards

Keywords

boring sampling; bottle/beaker sampling; core thief spot sampling; dipper sampling; extended tube sampling; grab sampling; grease sampling; marine custody transfer; sample containers; sample handling; sample labeling; sample mixing; sample shipment; sampling; sampling cage; static sampling; stand pipes; tap sampling; tube sampling;

ICS Code

ICS Number Code 75.080 (Petroleum products in general); 75.100 (Lubricants, industrial oils and related products)

DOI: 10.1520/D4057-06

ASTM International is a member of CrossRef.