ASTM C1269-97(2003)
Historical Standard: ASTM C1269-97(2003) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
SUPERSEDED (see Active link, below)
ASTM C1269
1. Scope
1.1 This practice covers a procedure for adjusting the operational sensitivity of in-plant walk-through metal detectors. Performance of this procedure should result with in-plant walk-through metal detectors being adjusted to an initial operational sensitivity setting suitable for performance testing.
1.2 This practice does not set test object specifications or specify specific test objects. These should be specified by the regulatory authority.
1.3 This practice uses information developed by Practice C1270, or an equivalent procedure, which identifies the critical test object (from a specified set of test objects), its critical orientation, and the critical test path through the detection zone. In the case of Practice C1270, the information is found on the detection sensitivity map(s) for each in-plant walk-through metal detector.
1.4 This practice is one of several developed to assist operators of nuclear facilities with meeting the metal detection performance requirements of the regulatory authorities (see Appendix).
1.5 This standard practice is neither intended to set performance levels nor limit or constrain technologies.
1.6 This practice does not address safety or operational issues associated with the use of walk-through metal detectors.
1.7 The values stated in SI units are to be regarded as standards. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C1238 Guide for Installation of Walk-Through Metal Detectors
C1270 Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1309 Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
F1468 Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
Keywords
entry control; metal detection; metal detector; personnel screening; physical security; special nuclear material; walk-through metal detector ; Detectors; Entry control; Metal detection/metal detector; Operational conditions/objectives/principals; Personnel screening; Physical security; Walk-through metal detector
ICS Code
ICS Number Code 03.080.30 (Services for consumers); 13.320 (Alarm and warning systems)
DOI: 10.1520/C1269-97R03
ASTM International is a member of CrossRef.