2008,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators "
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems "
1983,ASME,"ASME B1.20.1 Pipe Threads, General Purpose (Inch) "
2001,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings "
2003,ASME,"ASME A112.14.1 Backwater Valves "
2004,ASME,"ASME B36.10M Welded and Seamless Wrought Steel Pipe "
2002,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psi, Sizes NPS 1/2 - NPS 2 "
2009,ASME,"ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers"
2006,ASME,"ASME A112.19.19 Vitreous China Nonwater Urinals "
1999,ASME,"ASME A112.18.7 Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection "
2000,ASME,"ASME A112.6.2 Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks "
2002,ASME,"ASME B16.44 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi "
2010,ASME,"ASME A17.1 Safety Code for Elevators and Escalators "
2003,ASME,"ASME A112.6.4 Roof, Deck, and Balcony Drains "
2011,ASME,"ASME B31.9 Building Services Piping "
1985,ASME,"ASME A112.21.3M Hydrants for Utility and Maintenance Use "
2011,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
1994,ASME,"ASME B16.28-1994"
2011,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
2011,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts "
2011,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges & Flanged Fittings: Class 150,300,400,600,900,1500 & 2500 "
2011,ASME,"ASME A112.18.9 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures "
2011,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2012,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (for Plumbing Fixtures and Water-Connected Receptors)"
2012,ASME,"ASME A112.1016 Performance requirements for automatic compensating valves for individual showers and tub/shower combinations"
2001,ASME,"ASME A112.14.4 Grease Removal Devices"
2012,ASME,"ASME A19.15 Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors"
2007,ASME,"ASME A17.7 Performance-Based Safety Code for Elevators and Escalators"
2012,ASME,"ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2012,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
2012,ASME,"ASME B31.1 Power Piping"
2012,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid and Slurries"
2013,ASME,"ASME B16.34 Valves - Flanged, Threaded, and Welding End"
2013,ASME,"ASME A112.19.1 / CSA B45.2 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures"
2013,ASME,"ASME A112.19.2 /CSA B45.1 Ceramic Plumbing Fixtures"
2013,ASME,"ASME B16.26  Cast Copper Alloy Fittings for Flared Copper Tubes"
2013,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard"
2013,ASME,"ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings"
2013,ASME,"ASME A112.1016 (ASSE 1016-2011 - CSA B125.16-11) Performance requirements for automatic compensating valves for individual showers and tub/shower combinations"
2013,ASME,"ASME A112.19.14 Six-Liter Water Closets Equipped with a Dual Flushing Device"
2013,ASME,"ASME A112.3.4 (CSA B45.9) Plumbing Fixtures with Pumped Waste and Macerating Toilet Systems"
2013,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings: Classes 125 and 250"
2014,ASME,"ASME B31.9 Building Services Piping"
2009,ASME,"ASME A112.18.6/CSA B125.6 Flexible Water Connectors - Reaffirmed: 2014"
2008,ASME,"ASME A112.19.3/CSA B45.4 Stainless Steel Plumbing Fixtures"
2009,ASME,"ASME A112.4.1 Water Heater Relief Valve Drain Tubes - Reaffirmed: 2014"
2000,ASME,"ASME A112.14.3 Grease Interceptors - Reaffirmed: 2014"
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings - Reaffirmed: 2014"
2000,ASME,"ASME A112.1.3 Air Gap Fittings for use with Plumbing Fixtures, Appliances, and Appurtenances - Reaffirmed: 2015"
2010,ASME,"ASME A112.14.6 FOG (Fats, Oils, and Greases) Disposal Systems - Reaffirmed: 2015"
2014,ASME,"ASME A112.19.12 Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems"
1999,ASME,"ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System - Reaffirmed: 2015"
2010,ASME,"ASME A112.6.7 Sanitary Floor Sinks - Reaffirmed: 2015"
2005,ASME,"ASME A112.6.9 Siphonic Roof Drains - Reaffirmed: 2015"
2015,ASME,"ASSE 1002/ASME A112.1002/CSA B125.12 - 2015: Anti-Siphon Fill Valves for Water Closet Tanks"
2015,ASME,"ASME A112.18.2/CSA B125.2 - 2015: Plumbing Waste Fittings"
2015,ASME,"ASME A112.4.2/CSA B45.16 - 2015: Personal Hygiene Devices for Water Closets"
2016,ASME,"ASME A112.6.3 - 2016: Floor and Trench Drains"
2015,ASME,"ASME B20.1 - 2015: Safety Standard for Conveyors and Related Equipment"
2016,ASME,"ASME B31.5 - 2016: Refrigeration Piping and Heat Transfer Components"
2011,ASME,"ASME A112.19.5 Flush Valves and Spuds for Water Closets, Urinals, and Tanks (with Update No.1)"
2012,ASME,"ASME A112.19.7 Hydromassage Bathtub Systems"
2016,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWV"
2016,ASME,"ASME B31.3 Process Piping"
2007,ASME,"ASME A112.3.1 Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground"
2017,ASME,"ASME A112.4.14 Manually Operated Valves for Use in Plumbing Systems"
1997,ASME,"ASME A112.6.1M Supports for Off-the-Floor Plumbing Fixtures for Public Use"
2012,ASME,"ASME A112.18.1 Plumbing Supply Fittings"
2002,ASME,"ASME A112.18.3 Performance Requirements for Backflow Devices and Systems in Plumbing Fixture Fittings"
1991,ASME,"ASME A112.36.2M Cleanouts"
2012,ASME,"ASME B16.9 - 2012 (R2018) Factory-Made Wrought Buttwelding Fittings"
2013,ASME,"ASME B1.20.1 - 2013: Pipe Threads, General Purpose, Inch - Reaffirmed 2018"