2008,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators "
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems "
2004,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) "
1997,ASME,"ASME A112.6.1M Floor-Affixed Supports For Off-The-Floor Plumbing Fixtures For Public Use "
2001,ASME,"ASME A112.6.3 Floor And Trench Drains "
2008,ASME,"ASME A112.19.3 Stainless Steel Plumbing Fixtures "
2007,ASME,"ASME B16.9 Factory-Made Wrought Buttwelding Fittings "
2001,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings "
2001,ASME,"ASME B16.22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings "
2002,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWW "
2003,ASME,"ASME A112.14.1 Backwater Valves "
1991,ASME,"ASME A112.36.2M Cleanouts "
2004,ASME,"ASME B36.10M Welded and Seamless Wrought Steel Pipe "
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings "
2009,ASME,"ASME B16.5 Standard for Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 "
2009,ASME,"ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers"
2006,ASME,"ASME A112.19.19 Vitreous China Nonwater Urinals "
2006,ASME,"ASME A112.19.14 Six-Liter Water Closets Equipped With a Dual Flushing Device "
2009,ASME,"ASME B16.34 Valves-Flanged, Threaded, and Welding End "
2010,ASME,"ASME B31.5-2010 Refrigeration Piping and Heat Transfer Components "
2000,ASME,"ASME A112.14.3 Grease Interceptors "
2001,ASME,"ASME A112.14.4 Grease Removal Devices "
2002,ASME,"ASME A112.18.3 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings "
1999,ASME,"ASME A112.18.7 Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection "
2006,ASME,"ASME A112.19.12 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems "
2005,ASME,"ASME A112.19.15 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors "
2007,ASME,"ASME A112.3.1 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground "
1999,ASME,"ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System "
2000,ASME,"ASME A112.6.2 Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks "
2003,ASME,"ASME A90.1 Safety Standard for Belt Manlifts "
2002,ASME,"ASME B16.44 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi "
2010,ASME,"ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings "
2003,ASME,"ASME A112.6.4 Roof, Deck, and Balcony Drains "
2008,ASME,"ASME B31.12 Hydrogen Piping and Pipelines "
2007,ASME,"ASME A17.7 Performance-Based Safety Code for Elevators and Escalators "
2005,ASME,"ASME A112.6.9 Siphonic Roof Drains "
2004,ASME,"ASME A112.4.14 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems "
2010,ASME,"ASME A112.6.7 Sanitary Floor Sinks "
2011,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings "
2009,ASME,"ASME A112.4.1 Water Heater Relief Valve Drain Tubes "
2009,ASME,"ASME A112.4.2 Water Closet Personal Hygiene Devices "
1985,ASME,"ASME A112.21.3M Hydrants for Utility and Maintenance Use "
2011,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
2011,ASME,"ASME B16-42-2011 "
1994,ASME,"ASME B16.28-1994"
2011,ASME,"ASME B16.47-2011 "
2011,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
2011,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts "
2011,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges & Flanged Fittings: Class 150,300,400,600,900,1500 & 2500 "
2011,ASME,"ASME B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes "
2011,ASME,"ASME A112.18.9 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures "
2011,ASME,"ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings"
2011,ASME,"ASME A112.18.2 Plumbing waste fittings"
2011,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2000,ASME,"ASME A112.1.3 Air Gap Fittings for use with Plumbing Fixtures, Appliances, and Appurtenances"
2011,ASME,"ASME A112.18.1 Plumbing Supply Fittings with Update No. 1"
2012,ASME,"ASME A19.5 Flush Valves and Spuds for Water Closets, Urinals, and Tanks (with Update No.1)"
2012,ASME,"ASME A19.7 Hydromassage Bathtub Systems"
2012,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
2012,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2)"
2012,ASME,"ASME B31.1 Power Piping"
2012,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid and Slurries"
2013,ASME,"ASME A112.19.1 / CSA B45.2 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures"
2013,ASME,"ASME A112.19.2 /CSA B45.1 Ceramic Plumbing Fixtures"
2012,ASME,"ASME B31.3 Process Piping"
2013,ASME,"ASME A17.1 / CSA B44 Safety Code for Elevators and Escalators"
2013,ASME,"ASME A112.1016 (ASSE 1016-2011 - CSA B125.16-11) Performance requirements for automatic compensating valves for individual showers and tub/shower combinations"
2013,ASME,"ASME A112.3.4 (CSA B45.9) Plumbing Fixtures with Pumped Waste and Macerating Toilet Systems"
2009,ASME,"ASME A112.18.6/CSA B125.6 Flexible Water Connectors - Reaffirmed: 2014"