2007,ASTM,"A598/A598M-02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores"
2008,ASTM,"A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods"
2007,ASTM,"A698/A698M-07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields"
2007,ASTM,"A719/A719M-02(2007) Standard Test Method for Lamination Factor of Magnetic Materials"
2007,ASTM,"A720/A720M-02(2007) Standard Test Method for Ductility of Nonoriented Electrical Steel"
2007,ASTM,"A721/A721M-02(2007) Standard Test Method for  Ductility of Oriented Electrical Steel"
2008,ASTM,"A753-08 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)"
2004,ASTM,"A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens"
2007,ASTM,"A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs"
2006,ASTM,"E2478-06a Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission"
2008,ASTM,"E2491-08 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems"
2010,ASTM,"E2374-10 Standard Guide for Acoustic Emission System Performance Verification"
2005,ASTM,"E2422-05 Standard Digital Reference Images for Inspection of Aluminum Castings"
2005,ASTM,"E2445-05 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems"
2009,ASTM,"E2533-09 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications"
2010,ASTM,"E2534-10 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts"
2007,ASTM,"E2580-07 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications"
2007,ASTM,"E2581-07 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications"
2007,ASTM,"E2582-07 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications"
2007,ASTM,"E2598-07 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers"
2010,ASTM,"E2660-10 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications"
2009,ASTM,"E2662-09 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications"
2008,ASTM,"E2663-08 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods"
2010,ASTM,"E2669-10 Standard Digital Reference Images for Titanium Castings"
2009,ASTM,"E2700-09 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays"
2010,ASTM,"E2738-10 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods"
2009,ASTM,"B594-09 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications"
2010,ASTM,"E2446-05(2010) Standard Practice for Classification of Computed Radiology Systems"
2010,ASTM,"E2698-10  Standard Practice for Radiological Examination Using Digital Detector Arrays"
2010,ASTM,"E2699-10 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods"
2010,ASTM,"E2736-10 Standard Guide for Digital Detector Array Radiology"
2010,ASTM,"E2737-10 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability"
2010,ASTM,"E2767-10 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods"
2007,ASTM,"A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs (Redline)"
2011,ASTM,"A341/A341M-00(2011) Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods"
2005,ASTM,"A341/A341M-00(2005)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods"
2005,ASTM,"A341/A341M-00(2005) Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods"
2000,ASTM,"A341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods"
2006,ASTM,"B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications"
2002,ASTM,"B594-02 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications"
1997,ASTM,"B594-97 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications"
2002,ASTM,"A598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores"
2003,ASTM,"A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods"
2002,ASTM,"A698/A698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields"
2002,ASTM,"A719/A719M-02 Standard Test Method for Lamination Factor of Magnetic Materials"
2011,ASTM,"A720/A720M-02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel"
2002,ASTM,"A720/A720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel"
2011,ASTM,"A721/A721M-02(2011) Standard Test Method for  Ductility of Oriented Electrical Steel"
2002,ASTM,"A721/A721M-02 Standard Test Method for Ductility of Oriented Electrical Steel"
2002,ASTM,"A753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)"
2011,ASTM,"A912/A912M-11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens"
2011,ASTM,"A912/A912M-11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens (Redline)"
2002,ASTM,"A977/A977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs"
2011,ASTM,"A341/A341M-00(2011)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods"
2008,ASTM,"E2375-08 Standard Practice for Ultrasonic Testing of Wrought Products  "
2004,ASTM,"E2375-04 Standard Practice for Ultrasonic Examination of Wrought Products"
2010,ASTM,"E2445-05(2010) Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems"
2005,ASTM,"E2446-05 Standard Practice for Classification of Computed Radiology Systems"
2006,ASTM,"E2478-06 Standard Practice for Determining Damage-Based Design Criteria for Fiberglass Reinforced Plastics (FRP) Materials"
2006,ASTM,"E2491-06 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Examination Instruments and Systems"
2007,ASTM,"E2597-07e1 Standard Practice for Manufacturing Characterization of Digital Detector Arrays"
2007,ASTM,"E2597-07 Standard Practice for Manufacturing Characterization of Digital Detector Arrays"
2011,ASTM,"E2775-11 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction"
2011,ASTM,"E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<sub>CR</sub>) Waves"
2006,ASTM,"E2479-06 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<sub>CR</sub>) Waves"
2011,ASTM,"E2422-11 Standard Digital Reference Images for Inspection of Aluminum Castings"
2011,ASTM,"E2660-11 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications"
2011,ASTM,"E2669-11 Standard Digital Reference Images for Titanium Castings"
2011,ASTM,"E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams"
2004,ASTM,"E2374-04 Standard Guide for Acoustic Emission System Performance Verification"
2011,ASTM,"E2863-11 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization"
2011,ASTM,"E2699-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods"
2011,ASTM,"E2738-11 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods"
2011,ASTM,"E2767-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods"
2011,ASTM,"E2478-11 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission (Redline)"
2011,ASTM,"E2663-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods"
2012,ASTM,"E2862-12 Standard Practice for  Probability of Detection Analysis for Hit/Miss Data"
2012,ASTM,"E2580-12 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications"
2012,ASTM,"E2863-12 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization"
2012,ASTM,"E2904-12 Standard Practice for Characterization and Verification of Phased Array Probes"
2013,ASTM,"B594-13 Standard Practice for  Ultrasonic Inspection of Aluminum-Alloy Wrought Products"
2013,ASTM,"E2598/E2598M-13 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam  Heated Paper Dryers"
2013,ASTM,"E2375-08(2013) Standard Practice for  Ultrasonic Testing of Wrought Products"
2013,ASTM,"E2491-13 Standard Guide for  Evaluating Performance Characteristics of Phased-Array Ultrasonic  Testing Instruments and Systems"
2013,ASTM,"E2884-13 Standard Guide for  Eddy Current Testing of Electrically Conducting Materials Using  Conformable Sensor Arrays"
2013,ASTM,"E2903-13 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro  Focus X-ray Tubes"
2013,ASTM,"E2929-13 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive  Transduction"
2013,ASTM,"E2930-13 Standard Practice for Pressure Decay Leak Test Method"
1997,ASTM,"A698/A698M-92(1997)e1 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields"
1997,ASTM,"A753-97 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)"
1997,ASTM,"A838/A838M-97 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications"
1996,ASTM,"A839/A839M-96 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications"
1997,ASTM,"A598-92(1997) Standard Test Method for Magnetic Properties Of Magnetic Amplifier Cores"
1998,ASTM,"A697-98 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods"
1997,ASTM,"A719-97 Standard Test Method for Lamination Factor of Magnetic Materials"
1997,ASTM,"A720-97 Standard Test Method for Ductility of Nonoriented Electrical Steel"
1997,ASTM,"A721-97 Standard Test Method for Ductility of Oriented Electrical Steel"
2013,ASTM,"A753-08(2013) Standard Specification for  Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840,  N14076, N14080)"
1998,ASTM,"A912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens"
2013,ASTM,"A977/A977M-07(2013) Standard Test Method for  Magnetic Properties of High-Coercivity Permanent Magnet Materials  Using Hysteresigraphs"
1997,ASTM,"A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs"
2011,ASTM,"E2478-11 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission"
2010,ASTM,"E2661/E2661M-10 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications"
2012,ASTM,"E2905/E2905M-12 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth&mdash;Electromagnetic  Methods"
2013,ASTM,"E2906/E2906M-13 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles"
2013,ASTM,"E2907/E2907M-13 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission  from Crack Face Rubbing"
2013,ASTM,"E2928/E2928M-13 Standard Practice for Examination of Drillstring Threads Using the Alternating Current  Field Measurement Technique"
2013,ASTM,"E2869-13 Standard Digital Reference Images for Magnesium Castings"
2013,ASTM,"E2934-13 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Eddy Current (EC) Test Methods"
2013,ASTM,"E2868-13 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness"
2013,ASTM,"E2905/E2905M-13 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth&mdash;Electromagnetic  Methods"
2013,ASTM,"E2699-13 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  &#40;DICONDE&#41; for Digital Radiographic &#40;DR&#41; Test Methods"
2013,ASTM,"E2738-13 Standard Practice for  Digital Imaging and Communication Nondestructive Evaluation  &#40;DICONDE&#41; for Computed Radiography &#40;CR&#41; Test Methods"
2013,ASTM,"E2767-13 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  &#40;DICONDE&#41; for X-ray Computed Tomography &#40;CT&#41; Test Methods"
2014,ASTM,"E2597/E2597M-14 Standard Practice for Manufacturing Characterization of Digital Detector Arrays"
2013,ASTM,"E2884-13e1 Standard Guide for  Eddy Current Testing of Electrically Conducting Materials Using  Conformable Sensor Arrays"
2014,ASTM,"E2971-14 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum  Neutron Absorbers using Neutron Attenuation Measurements"
2014,ASTM,"E2445/E2445M-14 Standard Practice for Performance Evaluation and Long-Term Stability of Computed  Radiography Systems"
2014,ASTM,"E2984/E2984M-14 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon,  Forged Piping using Controlled Hydrostatic Pressurization"
2014,ASTM,"E2985/E2985M-14 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements  Derived from Resonant Ultrasound Spectroscopy"
2014,ASTM,"E2582-07(2014) Standard Practice for  Infrared Flash Thermography of Composite Panels and Repair  Patches Used in Aerospace Applications"
2014,ASTM,"E2581-14 Standard Practice for  Shearography of Polymer Matrix Composites and Sandwich Core  Materials in Aerospace Applications (Redline)"
2014,ASTM,"E2983-14 Standard Guide for  Application of Acoustic Emission for Structural Health Monitoring"
2014,ASTM,"E2700-14 Standard Practice for  Contact Ultrasonic Testing of Welds Using Phased Arrays"
2014,ASTM,"E2934-14 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  &#40;DICONDE&#41; for Eddy Current &#40;EC&#41; Test Methods"
2014,ASTM,"E2982-14 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound  Pressure Vessels Used in Aerospace Applications"
2014,ASTM,"E2581-14 Standard Practice for  Shearography of Polymer Matrix Composites and Sandwich Core  Materials in Aerospace Applications"
2014,ASTM,"E2663-14 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Ultrasonic Test Methods"
2015,ASTM,"A698/A698M-15 Standard Test Method for  Magnetic Shield Efficiency in Attenuating Alternating Magnetic   Fields"
2015,ASTM,"E2661/E2661M-15 Standard Practice for  Acoustic Emission Examination of Plate-like and Flat Panel  Composite Structures Used in Aerospace Applications"
2015,ASTM,"E2661/E2661M-15 Standard Practice for  Acoustic Emission Examination of Plate-like and Flat Panel  Composite Structures Used in Aerospace Applications (Redline)"
2015,ASTM,"E2662-15 Standard Practice for  Radiographic Examination of Flat Panel Composites and Sandwich  Core Materials Used in Aerospace Applications"
2015,ASTM,"E2662-15 Standard Practice for  Radiographic Examination of Flat Panel Composites and Sandwich  Core Materials Used in Aerospace Applications (Redline)"
2015,ASTM,"E3023-15 Standard Practice for Probability of Detection Analysis for <emph type=""bdit""><?Pub _font  FamName=""Times New Roman""?>&#xe2;<?Pub /_font?></emph> Versus <emph  type=""bdit"">a</emph> Data"
2015,ASTM,"E2981-15 Standard Guide for  Nondestructive Testing of the Composite Overwraps in Filament  Wound Pressure Vessels Used in Aerospace Applications"
2015,ASTM,"E3022-15 Standard Practice for  Measurement of Emission Characteristics and Requirements for  LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle  Testing  "
2013,ASTM,"E2738-13e1 Standard Practice for  Digital Imaging and Communication Nondestructive Evaluation  &#40;DICONDE&#41; for Computed Radiography &#40;CR&#41; Test Methods"
2013,ASTM,"E2868-13e1 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness"
2015,ASTM,"E2446-15 Standard Practice for  Manufacturing Characterization of Computed Radiography Systems"
2015,ASTM,"E2374-15 Standard Guide for  Acoustic Emission System Performance Verification"
2015,ASTM,"E2534-15 Standard Practice for  Process Compensated Resonance Testing Via Swept Sine Input  for Metallic and Non-Metallic Parts"
2016,ASTM,"E3052-16 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array"
2016,ASTM,"E3045-16 Standard Practice for Crack Detection Using Vibroacoustic Thermography"
2016,ASTM,"A341/A341M-16 Standard Test Method for  Direct Current Magnetic Properties of Soft Magnetic Materials  Using D-C Permeameters and the Point by Point (Ballistic) Test Methods"
2016,ASTM,"A341/A341M-16 Standard Test Method for  Direct Current Magnetic Properties of Soft Magnetic Materials  Using D-C Permeameters and the Point by Point (Ballistic) Test Methods (Redline)"
2016,ASTM,"E2669-16 Standard Digital Reference Images for  Titanium Castings"
2016,ASTM,"E2861-16 Standard Test Method for  Measurement of Beam Divergence and Alignment in Neutron Radiologic  Beams"
2016,ASTM,"E2861-16 Standard Test Method for  Measurement of Beam Divergence and Alignment in Neutron Radiologic  Beams (Redline)"
2016,ASTM,"E2971-16 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum  Neutron Absorbers using Neutron Attenuation Measurements"
2016,ASTM,"E2971-16 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum  Neutron Absorbers using Neutron Attenuation Measurements (Redline)"
2016,ASTM,"E2479-16 Standard Practice for  Measuring the Ultrasonic Velocity in Polyethylene Tank Walls  Using Lateral Longitudinal (L<inf>CR</inf>) Waves"
2016,ASTM,"E2479-16 Standard Practice for  Measuring the Ultrasonic Velocity in Polyethylene Tank Walls  Using Lateral Longitudinal (L<inf>CR</inf>) Waves (Redline)"
2016,ASTM,"E2446-16 Standard Practice for  Manufacturing Characterization of Computed Radiography Systems"
2016,ASTM,"E2478-11(2016) Standard Practice for  Determining Damage-Based Design Stress for Glass Fiber Reinforced  Plastic (GFRP) Materials Using Acoustic Emission"
2016,ASTM,"E2374-16 Standard Guide for  Acoustic Emission System Performance Verification"
2016,ASTM,"E2374-16 Standard Guide for  Acoustic Emission System Performance Verification (Redline)"
2016,ASTM,"E3024/E3024M-16 Standard Practice for Magnetic Particle Testing for General Industry"
2016,ASTM,"E3044/E3044M-16 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints"
2016,ASTM,"E3044/E3044M-16e1 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints"
2016,ASTM,"E2533-16 Standard Guide for  Nondestructive Testing of Polymer Matrix Composites Used in  Aerospace Applications"
2016,ASTM,"E2669-16e1 Standard Digital Reference Images for  Titanium Castings"
2016,ASTM,"E2775-16 Standard Practice for  Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric  Effect Transduction"
2016,ASTM,"E2775-16 Standard Practice for  Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric  Effect Transduction (Redline)"
2016,ASTM,"E3081-16 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing  via Swept Sine Input for Metallic and Non-Metallic Parts"
2016,ASTM,"E2533-16a Standard Guide for  Nondestructive Testing of Polymer Matrix Composites Used in  Aerospace Applications"
2016,ASTM,"E2375-16 Standard Practice for  Ultrasonic Testing of Wrought Products"
2017,ASTM,"E3100-17 Standard Guide for Acoustic Emission Examination of Concrete Structures"
2017,ASTM,"E2928/E2928M-17 Standard Practice for Examination of Drillstring Threads Using the Alternating Current  Field Measurement Technique"
2017,ASTM,"E2863-17 Standard Practice for  Acoustic Emission Examination of Welded Steel Sphere Pressure  Vessels Using Thermal Pressurization"
2017,ASTM,"E2863-17 Standard Practice for  Acoustic Emission Examination of Welded Steel Sphere Pressure  Vessels Using Thermal Pressurization (Redline)"
2017,ASTM,"E2533-17 Standard Guide for  Nondestructive Testing of Polymer Matrix Composites Used in  Aerospace Applications"
2017,ASTM,"E2533-17e1 Standard Guide for  Nondestructive Testing of Polymer Matrix Composites Used in  Aerospace Applications"
2017,ASTM,"E2422-17 Standard Digital Reference Images for  Inspection of Aluminum Castings"
2017,ASTM,"E2660-17 Standard Digital Reference Images for  Investment Steel Castings for Aerospace Applications"
2017,ASTM,"E2868-17 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness"
2017,ASTM,"E2869-17 Standard Digital Reference Images for Magnesium Castings"
2017,ASTM,"E2869-17 Standard Digital Reference Images for Magnesium Castings (Redline)"
2017,ASTM,"E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes"
2017,ASTM,"E2884-17 Standard Guide for  Eddy Current Testing of Electrically Conducting Materials Using  Conformable Sensor Arrays"
2017,ASTM,"E2580-17 Standard Practice for  Ultrasonic Testing of Flat Panel Composites and Sandwich Core  Materials Used in Aerospace Applications"
2018,ASTM,"E2737-10(2018) Standard Practice for  Digital Detector Array Performance Evaluation and Long-Term  Stability"
2018,ASTM,"E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro  Focus X-ray Tubes"
2017,ASTM,"E2736-17 Standard Guide for  Digital Detector Array Radiography"
2018,ASTM,"E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing  and Inspection Systems"
2018,ASTM,"E2862-18 Standard Practice for  Probability of Detection Analysis for Hit/Miss Data"
2018,ASTM,"E2698-18 Standard Practice for Radiographic Examination Using Digital Detector Arrays"
2018,ASTM,"E2929-18 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive  Transduction"
2018,ASTM,"E2929-18 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive  Transduction (Redline)"
2018,ASTM,"E2906/E2906M-18 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles"
2018,ASTM,"E2906/E2906M-18 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles (Redline)"
2018,ASTM,"E2934-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Eddy Current (EC) Test Methods"
2018,ASTM,"E2767-13(2018) Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for X-ray Computed Tomography (CT) Test Methods"
2018,ASTM,"E2663-14(2018) Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Ultrasonic Test Methods"
2018,ASTM,"E3022-18 Standard Practice for  Measurement of Emission Characteristics and Requirements for  LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle  Testing  "
2018,ASTM,"E3022-18 Standard Practice for  Measurement of Emission Characteristics and Requirements for  LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle  Testing   (Redline)"
2018,ASTM,"E3169-18 Standard Guide for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE)"
2018,ASTM,"E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays"
2018,ASTM,"E2738-18 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Computed Radiography (CR) Test Methods"
2018,ASTM,"E2699-18 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Digital Radiographic (DR) Test Methods"
2018,ASTM,"E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene  Electrofusion Joints"
2018,ASTM,"E3170/E3170M-18 Standard Practice for  Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints"
2018,ASTM,"E3101-18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints"
2018,ASTM,"E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints  Used in Piping Application"
2018,ASTM,"E2491-13(2018) Standard Guide for  Evaluating Performance Characteristics of Phased-Array Ultrasonic  Testing Instruments and Systems"
2015,ASTM,"E2981-15e1 Standard Guide for  Nondestructive Testing of the Composite Overwraps in Filament  Wound Pressure Vessels Used in Aerospace Applications"
2014,ASTM,"E2982-14e1 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound  Pressure Vessels Used in Aerospace Applications"
2019,ASTM,"E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements  Derived from Resonant Ultrasound Spectroscopy"
2019,ASTM,"E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission  from Crack Face Rubbing"
2019,ASTM,"E3213-19 Standard Practice for  Part-to-Itself Examination Using Process Compensated Resonance  Testing Via Swept Sine Input for Metallic and Non-Metallic Parts"
2019,ASTM,"B594-19 Standard Practice for  Ultrasonic Inspection of Aluminum-Alloy Wrought Products"
2019,ASTM,"B594-19 Standard Practice for  Ultrasonic Inspection of Aluminum-Alloy Wrought Products (Redline)"
2019,ASTM,"E3024/E3024M-19 Standard Practice for Magnetic Particle Testing for General Industry"
2019,ASTM,"E2582-19 Standard Practice for  Infrared Flash Thermography of Composite Panels and Repair  Patches Used in Aerospace Applications"
2019,ASTM,"E2983-14(2019) Standard Guide for  Application of Acoustic Emission for Structural Health Monitoring"
2019,ASTM,"E2905/E2905M-19 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth&#x2014;Electromagnetic  Methods"
2019,ASTM,"E3030-19 Standard Digital Reference Images for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction  > in. (50.8 to 114 mm)) Steel Castings"
2019,ASTM,"E2581-14(2019) Standard Practice for  Shearography of Polymer Matrix Composites and Sandwich Core  Materials in Aerospace Applications"
2020,ASTM,"E3168-20 Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters"
2015,ASTM,"E2973-15 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings"
2018,ASTM,"E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro  Focus X-ray Tubes (Redline)"
2017,ASTM,"E2736-17 Standard Guide for  Digital Detector Array Radiography (Redline)"
2020,ASTM,"E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build"
2020,ASTM,"E2699-20 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Digital Radiographic (DR) Test Methods"
2020,ASTM,"E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth&#x2014;Electromagnetic  Methods"
2020,ASTM,"E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth&#x2014;Electromagnetic  Methods (Redline)"
2020,ASTM,"A698/A698M-20 Standard Test Method for  Magnetic Shield Efficiency in Attenuating Alternating Magnetic   Fields"
2020,ASTM,"A698/A698M-20 Standard Test Method for  Magnetic Shield Efficiency in Attenuating Alternating Magnetic   Fields (Redline)"
2020,ASTM,"E2700-20 Standard Practice for  Contact Ultrasonic Testing of Welds Using Phased Arrays"
2020,ASTM,"E2700-20 Standard Practice for  Contact Ultrasonic Testing of Welds Using Phased Arrays (Redline)"
2020,ASTM,"E2661/E2661M-20 Standard Practice for  Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications"
2020,ASTM,"E2661/E2661M-20e1 Standard Practice for  Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications"
2020,ASTM,"E3166-20 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build"
2020,ASTM,"E2445/E2445M-20 Standard Practice for Performance Evaluation and Long-Term Stability of Computed  Radiography Systems"
2020,ASTM,"E2445/E2445M-20 Standard Practice for Performance Evaluation and Long-Term Stability of Computed  Radiography Systems (Redline)"
2020,ASTM,"E2861-16(2020) Standard Test Method for  Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams"
2020,ASTM,"E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum  Neutron Absorbers using Neutron Attenuation Measurements"
2020,ASTM,"E2534-20 Standard Practice for  Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts"
2020,ASTM,"E2534-20 Standard Practice for  Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts (Redline)"
2020,ASTM,"E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters"
2020,ASTM,"E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters (Redline)"
1993,ASTM,"A346-74(1993)e1 Standard Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method (Withdrawn 1998)"
1981,ASTM,"F132-70(1981) Method of Testing Nonmetallic Magnetic Cores to be Used in a Coincident Current Memory with a Two-To-One Selection Ratio Operating Under Full Switching Conditions (Withdrawn 1987)"
2021,ASTM,"A753-21 Standard Specification for  Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840,  N14076, N14080)"
2021,ASTM,"A753-21 Standard Specification for  Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840,  N14076, N14080) (Redline)"
2021,ASTM,"E2981-21 Standard Guide for  Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications"
2021,ASTM,"E2981-21 Standard Guide for  Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications (Redline)"
2021,ASTM,"E2582-21 Standard Practice for  Infrared Flash Thermography of Composite Panels and Repair  Patches Used in Aerospace Applications"
2021,ASTM,"E2582-21 Standard Practice for  Infrared Flash Thermography of Composite Panels and Repair  Patches Used in Aerospace Applications (Redline)"
1992,ASTM,"A876M-92 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric] (Withdrawn 1998)"
1984,ASTM,"A665-84 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G048, 27G053, 30G058, and 35G066 (Withdrawn 1987)"
1984,ASTM,"A665M-84 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G106M, 27G117M, 30G128M, and 35G146M (Withdrawn 1987)"
1998,ASTM,"A677M-98a Standard Specification for Nonoriented Electrical Steel, Fully Processed Types (Metric) (Withdrawn 2000)"
1991,ASTM,"A683M-91 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types [Metric] (Withdrawn 1999)"
1984,ASTM,"A725M-84 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168M, 30H183M, 35H207M (Withdrawn 1988)"
1992,ASTM,"A726M-92 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semi-Processed Types [Metric] (Withdrawn 1998)"
2021,ASTM,"E2533-21 Standard Guide for  Nondestructive Examination of Polymer Matrix Composites Used  in Aerospace Applications"
2021,ASTM,"E2533-21 Standard Guide for  Nondestructive Examination of Polymer Matrix Composites Used  in Aerospace Applications (Redline)"
2021,ASTM,"E3023-21 Standard Practice for Probability of Detection Analysis for <emph type=""bdit""><?Pub _font  FamName=""Times New Roman""?>â<?Pub /_font?></emph> Versus <emph  type=""bdit"">a</emph> Data"
2021,ASTM,"E3023-21 Standard Practice for Probability of Detection Analysis for <emph type=""bdit""><?Pub _font  FamName=""Times New Roman""?>â<?Pub /_font?></emph> Versus <emph  type=""bdit"">a</emph> Data (Redline)"
2019,ASTM,"B594-19e1 Standard Practice for  Ultrasonic Inspection of Aluminum-Alloy Wrought Products"
2021,ASTM,"E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications"
2021,ASTM,"E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications (Redline)"
2021,ASTM,"E3267-21 Standard Guide for Building Information Models and Archiving for Digital Imaging  and Communication in Nondestructive Evaluation (DICONDE)"
2021,ASTM,"E2479-16(2021) Standard Practice for  Measuring the Ultrasonic Velocity in Polyethylene Tank Walls  Using Lateral Longitudinal (L<inf>CR</inf>) Waves"
2021,ASTM,"E2930-13(2021) Standard Practice for Pressure Decay Leak Test Method"
2021,ASTM,"E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing  via Swept Sine Input for Metallic and Non-Metallic Parts"
2021,ASTM,"E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing  via Swept Sine Input for Metallic and Non-Metallic Parts (Redline)"
2021,ASTM,"E2767-21 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for X-ray Computed Tomography (CT) Test Methods"
2021,ASTM,"E2767-21 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for X-ray Computed Tomography (CT) Test Methods (Redline)"
1991,ASTM,"A718-75(1991) Test Method for Surface Insulation Resistivity of Multi-Strip Specimens"
2019,ASTM,"E3024/E3024M-19e1 Standard Practice for Magnetic Particle Testing for General Industry"
1978,ASTM,"B305-56(1978)e1 Test Method for Maximum Loading Stress at Temperature of Thermostat Metals ( Cantilever Beam Method)"
2021,ASTM,"E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array"
2021,ASTM,"E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array (Redline)"
2021,ASTM,"E2984/E2984M-21 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon,  Forged Piping using Controlled Hydrostatic Pressurization"
2021,ASTM,"E2984/E2984M-21 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon,  Forged Piping using Controlled Hydrostatic Pressurization (Redline)"
2021,ASTM,"E2374-16(2021) Standard Guide for  Acoustic Emission System Performance Verification"
2021,ASTM,"E2598/E2598M-21 Standard Practice for  Acoustic Emission Examination of Cast Iron Yankee and Steam  Heated Paper Dryers"
2021,ASTM,"E2598/E2598M-21 Standard Practice for  Acoustic Emission Examination of Cast Iron Yankee and Steam  Heated Paper Dryers (Redline)"
2021,ASTM,"E3185-21 Standard Digital Reference Images for  Tin Bronze Castings"
2021,ASTM,"E3045-21 Standard Practice for Crack Detection Using Vibroacoustic Thermography"
2022,ASTM,"E2597/E2597M-22 Standard Practice for  Manufacturing Characterization of Digital Detector Arrays"
2022,ASTM,"E2597/E2597M-22 Standard Practice for  Manufacturing Characterization of Digital Detector Arrays (Redline)"
2021,ASTM,"E3327/E3327M-21 Standard Guide for  the Qualification and Control of the Assisted Defect Recognition  of Digital Radiographic Test Data"
2022,ASTM,"E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints"
2022,ASTM,"E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints (Redline)"
2022,ASTM,"E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry"
2022,ASTM,"E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry (Redline)"
2022,ASTM,"E3024/E3024M-22 Standard Practice for Magnetic Particle Testing for General Industry"
2022,ASTM,"E2934-22 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Eddy Current (EC) Test Methods"
2022,ASTM,"E2884-22 Standard Guide for  Eddy Current Testing of Electrically Conducting Materials Using  Conformable Sensor Arrays"
2022,ASTM,"E2884-22 Standard Guide for  Eddy Current Testing of Electrically Conducting Materials Using  Conformable Sensor Arrays (Redline)"
2022,ASTM,"E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography"
2022,ASTM,"E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography (Redline)"
2022,ASTM,"E3353-22 Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for  Laser Powder Bed Fusion"
2022,ASTM,"A341/A341M-16(2022) Standard Test Method for  Direct Current Magnetic Properties of Soft Magnetic Materials  Using D-C Permeameters and the Point by Point (Ballistic) Test Methods"
2022,ASTM,"E2478-11(2022) Standard Practice for  Determining Damage-Based Design Stress for Glass Fiber Reinforced  Plastic (GFRP) Materials Using Acoustic Emission"
2022,ASTM,"E2662-15(2022) Standard Practice for  Radiographic Examination of Flat Panel Composites and Sandwich  Core Materials Used in Aerospace Applications"
2022,ASTM,"E2736-17(2022) Standard Guide for  Digital Detector Array Radiography"
2022,ASTM,"E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles"
2022,ASTM,"E2929-18(2022) Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive  Transduction"
2022,ASTM,"E3100-22 Standard Guide for Acoustic Emission Examination of Concrete Structures"
2022,ASTM,"E3100-22 Standard Guide for Acoustic Emission Examination of Concrete Structures (Redline)"
2022,ASTM,"E2973-22 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings"
2022,ASTM,"E2973-22 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings (Redline)"
2022,ASTM,"E2422-22 Standard Digital Reference Images for  Inspection of Aluminum Castings"
2022,ASTM,"E2422-22 Standard Digital Reference Images for  Inspection of Aluminum Castings (Redline)"
2022,ASTM,"E2660-22 Standard Digital Reference Images for  Investment Steel Castings for Aerospace Applications"
2022,ASTM,"E2660-22 Standard Digital Reference Images for  Investment Steel Castings for Aerospace Applications (Redline)"
2022,ASTM,"E2669-22 Standard Digital Reference Images for  Titanium Castings"
2022,ASTM,"E2669-22 Standard Digital Reference Images for  Titanium Castings (Redline)"
2022,ASTM,"E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic  Probes"
2022,ASTM,"E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic  Probes (Redline)"
2022,ASTM,"E2375-22 Standard Practice for  Ultrasonic Testing of Wrought Products"
2022,ASTM,"E2375-22 Standard Practice for  Ultrasonic Testing of Wrought Products (Redline)"
2022,ASTM,"E3370-22 Standard Practice for  Matrix Array Ultrasonic Testing of Composites, Sandwich Core  Constructions, and Metals Used in Aerospace Applications"
2019,ASTM,"E3030-19e1 Standard Digital Reference Images for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction  > in. (50.8 to 114 mm)) Steel Castings"
2023,ASTM,"E3375-23 Standard Practice for Cone Beam Computed Tomographic (CT) Examination"
2022,ASTM,"E2868-22 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness"
2022,ASTM,"E2868-22 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness (Redline)"
2023,ASTM,"E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current  Field Measurement Technique"
2023,ASTM,"E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current  Field Measurement Technique (Redline)"
2023,ASTM,"E3398-23 Standard Guide for Digital Neutron Radiography"
2023,ASTM,"E2663-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Ultrasonic Test Methods"
2023,ASTM,"E2663-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Ultrasonic Test Methods (Redline)"
2023,ASTM,"E2738-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Computed Radiography (CR) Test Methods"
2023,ASTM,"E2738-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Computed Radiography (CR) Test Methods (Redline)"
2023,ASTM,"E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Eddy Current (EC) Test Methods"
2023,ASTM,"E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Eddy Current (EC) Test Methods (Redline)"
2023,ASTM,"E2446-23 Standard Practice for  Manufacturing Characterization of Computed Radiography Systems"
2023,ASTM,"E2446-23 Standard Practice for  Manufacturing Characterization of Computed Radiography Systems (Redline)"
2023,ASTM,"E2699-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Digital X-ray (DX) Test Methods"
2023,ASTM,"E2699-23 Standard Practice for  Digital Imaging and Communication in Nondestructive Evaluation  (DICONDE) for Digital X-ray (DX) Test Methods (Redline)"
2023,ASTM,"E3388-23 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution  in Radiography and Radioscopy for High Energy Applications"
2023,ASTM,"E2862-23 Standard Practice for  Probability of Detection Analysis for Hit/Miss Data"
2023,ASTM,"E2862-23 Standard Practice for  Probability of Detection Analysis for Hit/Miss Data (Redline)"
2023,ASTM,"E2491-23 Standard Guide for  Evaluating Performance Characteristics of Phased-Array Ultrasonic  Testing Instruments and Systems"
2023,ASTM,"E2491-23 Standard Guide for  Evaluating Performance Characteristics of Phased-Array Ultrasonic  Testing Instruments and Systems (Redline)"
2023,ASTM,"E2737-23 Standard Practice for  Digital Detector Array Performance Evaluation and Long-Term  Stability"
2023,ASTM,"E2737-23 Standard Practice for  Digital Detector Array Performance Evaluation and Long-Term  Stability (Redline)"
2023,ASTM,"E3370-23 Standard Practice for  Matrix Array Ultrasonic Testing of Composites, Sandwich Core  Constructions, and Metals"
2023,ASTM,"E3370-23 Standard Practice for  Matrix Array Ultrasonic Testing of Composites, Sandwich Core  Constructions, and Metals (Redline)"
2023,ASTM,"E3397-23 Standard Practice for Resonance Testing Using the Impulse Excitation Method"
2023,ASTM,"E2581-14(2023) Standard Practice for  Shearography of Polymer Matrix Composites and Sandwich Core  Materials in Aerospace Applications"
2023,ASTM,"E2775-16(2023) Standard Practice for  Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric  Effect Transduction"
2023,ASTM,"E3167/E3167M-18(2023) Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene  Electrofusion Joints"
2023,ASTM,"E3170/E3170M-18(2023) Standard Practice for  Phased Array Ultrasonic Testing of Polyethylene Electrofusion  Joints"
2024,ASTM,"E2580-24 Standard Practice for  Ultrasonic Testing of Flat Panel Composites and Sandwich Core  Materials Used in Aerospace Applications"
2024,ASTM,"E2580-24 Standard Practice for  Ultrasonic Testing of Flat Panel Composites and Sandwich Core  Materials Used in Aerospace Applications (Redline)"