2007,ASME,"ASME A17.1/CSA B44 Safety Code for Elevators and Escalators "
2007,ASME,"ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks "
2008,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators "
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems "
2004,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) "
1997,ASME,"ASME A112.6.1M Floor-Affixed Supports For Off-The-Floor Plumbing Fixtures For Public Use "
2001,ASME,"ASME A112.6.3 Floor And Trench Drains "
2005,ASME,"ASME A112.18.1 Plumbing Supply Fittings "
2008,ASME,"ASME A112.19.1 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures "
2008,ASME,"ASME A112.19.2 Ceramic Plumbing Fixtures "
2008,ASME,"ASME A112.19.3 Stainless Steel Plumbing Fixtures "
1983,ASME,"ASME B1.20.1 Pipe Threads, General Purpose (Inch) "
2005,ASME,"ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings (Classes 25, 125, and 250) "
2006,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
2006,ASME,"ASME B16.4 Gray Iron Threaded Fittings (Classes 125 and 250) "
2003,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings (NPS 1/2 Through NPS 24 Metric/Inch Standard) "
2007,ASME,"ASME B16.9 Factory-Made Wrought Buttwelding Fittings "
2005,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded "
1998,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings "
1991,ASME,"ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads "
2006,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings (Classes 125 and 250) "
2001,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings "
2001,ASME,"ASME B16.22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings "
2002,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWW "
2006,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings (Classes 150, 300, 600, 900, 1500, and 2500) "
2004,ASME,"ASME B16.34 Valves - Flanged, Threaded, and Welding End "
2006,ASME,"ASME B16.36 Orifice Flanges "
1998,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions (Classes150, 250, and 300) "
1998,ASME,"ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings (Classes 150 And 300) "
1987,ASME,"ASME B18.2.2 Square and Hex Nuts (Inch Series) "
1997,ASME,"ASME B18.6.1 Wood Screws (INCH SERIES) "
1998,ASME,"ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch) "
2007,ASME,"ASME B31.1 Power Piping "
2006,ASME,"ASME B31.5 Refrigeration Piping and Heat Transfer Components "
2007,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems "
2008,ASME,"ASME B31.9 Building Services Piping "
2008,ASME,"ASME NQA 1 Quality Assurance Requirements for Nuclear Facility Applications "
2007,ASME,"ASME PTC 12.3 Performance Test Code on Deaerators "
2001,ASME,"ASME PTC 25 Pressure Relief Devices "
2008,ASME,"ASME PTC 4 Fired Steam Generators - Performance Test Codes "
2003,ASME,"ASME PTC 23 Atmospheric Water Cooling Equipment "
2003,ASME,"ASME A112.14.1 Backwater Valves "
1994,ASME,"ASME A112.19.4M Porcelain Enameled Formed Steel Plumbing Fixtures "
2005,ASME,"ASME A112.19.5 Trim for Water-Closet Bowls, Tanks and Urinals "
2007,ASME,"ASME A112.19.8 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs "
1991,ASME,"ASME A112.36.2M Cleanouts "
2002,ASME,"ASME N509 Nuclear Power Plant Air-Cleaning Units and Components "
2007,ASME,"ASME N510 Testing of Nuclear Air Treatment Systems "
2004,ASME,"ASME NOG-1 Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder) "
2008,ASME,"ASME PTC 19.11 Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle "
1987,ASME,"ASME PTC 19.2 Pressure Measurement Instruments and Apparatus "
1974,ASME,"ASME PTC 19.3 Temperature Measurement Instruments and Apparatus "
2004,ASME,"ASME PTC 19.5 Flow Measurement "
1980,ASME,"ASME PTC 38 Determining the Concentration of Particulate Matter in a Gas Stream "
2007,ASME,"ASME QEI-1 Standard for the Qualification of Elevator Inspectors "
2003,ASME,"ASME B1.1 Unified Inch Screw Threads "
1976,ASME,"ASME B1.20.3 Dryseal Pipe Threads (Inch) "
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads (Inch) "
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile "
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads "
1967,ASME,"ASME B17.1 Keys and Keyseats "
2002,ASME,"ASME B18.2.4.1M Metric Hex Nuts, Style 1 "
1979,ASME,"ASME B18.2.4.6M Metric Heavy Hex Nuts "
1986,ASME,"ASME B18.3.3M Hexagon Socket Head Shoulder Screws (Metric Series) "
2003,ASME,"ASME B18.3 Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series) "
2006,ASME,"ASME B18.5.2.1M Metric Round Head Short Square Neck Bolts "
1982,ASME,"ASME B18.5.2.2M Metric Round Head Square Neck Bolts "
1998,ASME,"ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series) "
2003,ASME,"ASME B18.6.3 Machine Screws and Machine Screw Nuts "
1977,ASME,"ASME B27.7 General Purpose Tapered and Reduced Cross Section Retaining Rings "
2001,ASME,"ASME B29.400 Combination, ""H"" Type Mill Chains, and Sprockets "
2004,ASME,"ASME B30.11 Monorails and Underhung Cranes "
2007,ASME,"ASME B30.16 Overhead Hoists (Underhung) "
2006,ASME,"ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) "
2005,ASME,"ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) "
2005,ASME,"ASME B30.22 Articulating Boom Cranes "
2004,ASME,"ASME B30.3 Construction Tower Cranes "
2007,ASME,"ASME B30.5 Mobile and Locomotive Cranes "
2004,ASME,"ASME B30.8 Floating Cranes and Floating Derricks "
2008,ASME,"ASME B31.3 Process Piping "
2006,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids "
2004,ASME,"ASME B36.10M Welded and Seamless Wrought Steel Pipe "
1999,ASME,"ASME HST-1 Performance Standard for Electric Chain Hoists "
1999,ASME,"ASME HST-2 Performance Standard for Hand Chain Manually Operated Chain Hoists "
1999,ASME,"ASME HST-3 Performance Standard for Manually Lever Operated Chain Hoists "
1999,ASME,"ASME HST-4 Performance Standard for Overhead Electric Wire Rope Hoists "
1999,ASME,"ASME HST-5 Performance Standard for Air Chain Hoists "
1999,ASME,"ASME HST-6 Performance Standard for Air Wire Rope Hoists "
2004,ASME,"ASME MFC-3M Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi "
2009,ASME,"ASME AG 1 Code on Nuclear Air and Gas Treatment "
2009,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded "
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings "
2007,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges - Ring-Joint, Spiral Wound, and Jacketed "
2005,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges "
2007,ASME,"ASME B16.25 Standard for Buttwelding Ends "
2006,ASME,"ASME B16.26 Standard for Cast Copper Alloy Fittings for Flared Copper Tubes "
2007,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV "
2002,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psi, Sizes NPS 1/2 - NPS 2 "
2007,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) "
2009,ASME,"ASME B16.5 Standard for Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 "
2001,ASME,"ASME B16.50 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings "
1967,ASME,"ASME B17.2 Woodruff Keys and Keyseats "
1999,ASME,"ASME B18.21.1 Lock Washers (Inch Series) "
1965,ASME,"ASME B18.22.1 Plain Washers "
1981,ASME,"ASME B18.22M Metric Plain Washers "
1981,ASME,"ASME B18.2.3.8M Metric Hex Lag Screws "
2004,ASME,"ASME B18.24 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products "
2004,ASME,"ASME B36.19M Stainless Steel Pipe "
2009,ASME,"ASME B4.1 Preferred Limits and Fits for Cylindrical Parts "
2002,ASME,"ASME B46.1 Surface Texture (Surface Roughness, Waviness and Lay) "
2009,ASME,"ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers"
2008,ASME,"ASME PTC 25 Pressure Relief Devices "
1970,ASME,"ASME PTC 9 Displacement Compressors, Vacuum Pumps and Blowers "
2006,ASME,"ASME A112.19.19 Vitreous China Nonwater Urinals "
2006,ASME,"ASME A112.19.14 Six-Liter Water Closets Equipped With a Dual Flushing Device "
2005,ASME,"ASME A112.18.2 Plumbing Waste Fittings "
2009,ASME,"ASME B16.34 Valves-Flanged, Threaded, and Welding End "
2009,ASME,"ASME B16.36 Orifice Flanges "
2009,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions - Classes 150, 250, and 300 "
2010,ASME,"ASME B18.2.4.6M Metric Heavy Hex Nuts "
2009,ASME,"ASME B18.21.1 Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series) "
2009,ASME,"ASME B30.3 Tower Cranes - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings "
2010,ASME,"ASME B30.8 Floating Cranes and Floating Derricks "
2010,ASME,"ASME B30.11 Monorails and Underhung Cranes "
2009,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids "
2010,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems "
2010,ASME,"ASME QEI-1 Standard for the Qualification of Elevator Inspectors "
2006,ASME,"ASME B1.20.2M-2006 Pipe Threads, 60 deg, General Purpose "
2010,ASME,"ASME NOG-1-2010 Rules for Construction of Overhead and Gantry Cranes "
2004,ASME,"ASME B36.19M-2004 Reaffirmed 2010 Stainless Steel Pipe "
2005,ASME,"ASME B 18.2.1-1996 Reaffirmed 2005 Square and Hex Bolts and Screws (Inch Series) "
2004,ASME,"ASME B36.10M-2004 Reaffirmed 2010 Welded and Seamless Wrought Steel Pipe "
2004,ASME,"ASME NUM-1"
2010,ASME,"ASME B31.5-2010 Refrigeration Piping and Heat Transfer Components "
2009,ASME,"ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) "
1999,ASME,"ASME HST-2-1999 Reaffirmed 2010 Performance Standard for Hand Chain Manual' Operated Chain Hoists"
1999,ASME,"ASME HST-3-1999 Reaffirmed 2010 Performance Standard for Manually Lever Operated Chain Hoists "
1999,ASME,"ASME HST-4-1999 Reaffirmed 2010 Performance Standard for Overhead Electric Wire Rope Hoists "
1999,ASME,"ASME HST-5 1999 Reaffirmed 2010 Performance Standard for Air Chain Hoists "
1999,ASME,"ASME HST-6-1999 Reaffirmed 2010 Performance Standard for Air Wire Rope Hoists "
2000,ASME,"ASME A112.1.3 Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances "
2000,ASME,"ASME A112.14.3 Grease Interceptors "
2001,ASME,"ASME A112.14.4 Grease Removal Devices "
2002,ASME,"ASME A112.18.3 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings "
2003,ASME,"ASME A112.18.6 Flexible Water Connectors "
1999,ASME,"ASME A112.18.7 Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection "
2006,ASME,"ASME A112.19.12 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems "
2001,ASME,"ASME A112.19.13 Electrohydraulic Water Closets "
2005,ASME,"ASME A112.19.15 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors "
1995,ASME,"ASME A112.19.6 Hydraulic Performance Requirements for Water Closets and Urinals "
2006,ASME,"ASME A112.19.7 Hydromassage Bathtub Appliances "
1991,ASME,"ASME A112.19.9 Nonvitreous Ceramic Plumbing Fixtures "
2007,ASME,"ASME A112.3.1 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground "
2000,ASME,"ASME A112.3.4 Macerating Toilet Systems and Related Components "
1993,ASME,"ASME A112.4.1 Water Heater Relief Valve Drain Tubes "
1999,ASME,"ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System "
2000,ASME,"ASME A112.6.2 Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks "
2001,ASME,"ASME A112.6.7 Enameled and Epoxy-coated Cast-iron and PVC Plastic Sanitary Floor Sinks "
2005,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chair Lifts "
2003,ASME,"ASME A90.1 Safety Standard for Belt Manlifts "
2002,ASME,"ASME B16.44 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi "
1997,ASME,"ASME PTC 12.3 Performance Test Codes "
2006,ASME,"ASME B30.9 Slings "
2005,ASME,"ASME B30.21 Manually Lever Operated Hoists "
2005,ASME,"ASME B30.23 Personnel Lifting Systems "
2004,ASME,"ASME A17.1 Safety Code for Elevators and Escalators "
2009,ASME,"ASME B30.1 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries "
2010,ASME,"ASME B30.4 Portal and Pedestal Cranes "
2010,ASME,"ASME B30.6 Derricks "
2006,ASME,"ASME B30.7 Base-Mounted Drum Hoists "
2006,ASME,"ASME B30.12 Handling Loads Suspended From Rotorcraft "
2010,ASME,"ASME B30.14 Side Boom Tractors "
2004,ASME,"ASME B30.18 Stacker Cranes "
2005,ASME,"ASME B30.19 Cableways "
2008,ASME,"ASME B30.24 Container Cranes "
2007,ASME,"ASME B30.25 Scrap and Material Handlers "
2009,ASME,"ASME B30.27 Material Placement Systems "
2010,ASME,"ASME A17.1 Safety Code for Elevators and Escalators "
2010,ASME,"ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings "
1998,ASME,"ASME B16.45 Cast Iron Fittings for Sovent Drainage Systems "
2010,ASME,"ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads "
2011,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges "
2006,ASME,"ASME B16.47 Large Diameter Steel Flanges "
2010,ASME,"ASME B16.48 Line Blanks "
2010,ASME,"ASME A17.1/CSA B44 Handbook "
2005,ASME,"ASME PTC 22 Gas Turbines "
2010,ASME,"ASME B30.6 Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings"
2004,ASME,"ASME PTC 1 General Instructions "
2002,ASME,"ASME PTC 50 Fuel Cell Power Systems Performance "
2010,ASME,"ASME PTC 12.2 Steam Surface Condensers "
2009,ASME,"ASME PTC 70 Ramp Rates "
1972,ASME,"ASME PTC 31 lon Exchange Equipment "
1991,ASME,"ASME PTC 21 Particulate Matter Collection Equipment "
1991,ASME,"ASME PTC 30 Air Cooled Heat Exchangers "
1996,ASME,"ASME PTC 46 Performance Test Code on Overall Plant Performance "
2003,ASME,"ASME A112.6.4 Roof, Deck, and Balcony Drains "
2010,ASME,"ASME PTC 19.3 Thermowells "
2010,ASME,"ASME A112.14.6 FOG (Fats, Oils, and Greases) Disposal Systems "
2010,ASME,"ASME B31T Standard Toughness Requirements for Piping "
1999,ASME,"ASME A17.4 Guide for Emergency Personnel "
2007,ASME,"ASME PTC 30.1 Air-Cooled Steam Condensers "
1988,ASME,"ASME PTC 42 Wind Turbines "
2004,ASME,"ASME PTC 6 Steam Turbines "
2009,ASME,"ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines "
2009,ASME,"ASME B20.1 Safety Standard for Conveyors and Related Equipment "
2008,ASME,"ASME PTC 11 Fans "
2003,ASME,"ASME B30.13 Storage/Retrieval (S/R) Machines and Associated Equipment "
2008,ASME,"ASME B31E Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems "
2011,ASME,"ASME PTC 18 Hydraulic Turbines and Pump-Turbines "
2008,ASME,"ASME B31.12 Hydrogen Piping and Pipelines "
1976,ASME,"ASME PTC 24 Ejectors "
2008,ASME,"ASME B31J Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components "
2011,ASME,"ASME B30.7 Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings "
2010,ASME,"ASME A112.19.17 Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems "
1969,ASME,"ASME PTC 4.2 Coal Pulverizers "
2000,ASME,"ASME PTC 12.1 Closed Feedwater Heaters "
2005,ASME,"ASME PTC 19.1 Test Uncertainty "
2011,ASME,"ASME B30.2 Overhead and Gantry Cranes "
2007,ASME,"ASME A17.7 Performance-Based Safety Code for Elevators and Escalators "
2005,ASME,"ASME PTC 29 Speed-Governing Systems for Hydraulic Turbine-Generator Units "
1980,ASME,"ASME PTC 19.7 Measurement of Shaft Power "
2011,ASME,"ASME B30.18 Stacker Cranes "
2008,ASME,"ASME PTC 4.4 Gas Turbine Heat Recovery Steam Generators "
1990,ASME,"ASME PTC 8.2 Centrifugal Pumps "
2004,ASME,"ASME PTC 36 Measurement of Industrial Sound "
2006,ASME,"ASME PTC 47 Integrated Gasification Combined Cycle Power Generation Plants "
2009,ASME,"ASME NUM 1 Rules for Construction of Cranes, Monorails, and Hoists (With Bridge or Trolley or Hoist of the Underhung Type) "
2007,ASME,"ASME PTC 19.22 Data Acquisition Systems "
2001,ASME,"ASME PTC 2 Definitions and Values "
2010,ASME,"ASME B30.28 Balance Lifting Units "
2010,ASME,"ASME B30.26 Rigging Hardware "
2011,ASME,"ASME A17.5 Elevator and Escalator Electrical Equipment "
2005,ASME,"ASME A112.6.9 Siphonic Roof Drains "
2011,ASME,"ASME B30.19 Cableways "
1973,ASME,"ASME PTC 17 Reciprocating Internal - Combustion Engines "
2010,ASME,"ASME B31Q Pipeline Personnel Qualification "
2002,ASME,"ASME A112.4.7 Point of Use and Branch Water Submetering Systems "
2009,ASME,"ASME A112.18.8 In-Line Sanitary Waste Valves for Plumbing Drainage Systems "
2006,ASME,"ASME A112.19.16 Terrazzo Plumbing Fixtures "
1968,ASME,"ASME PTC 4.3 Air Heaters "
2004,ASME,"ASME PTC 6.2 Steam Turbines in Combined Cycles "
2007,ASME,"ASME B16.49 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems "
2004,ASME,"ASME A112.4.14 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems "
2000,ASME,"ASME PTC 12.5 Single Phase Heat Exchangers "
1992,ASME,"ASME PTC 12.4 Moisture Separator Reheaters "
2007,ASME,"ASME PTC 34 Waste Combustors With Energy Recovery "
2005,ASME,"ASME PTC 39 Steam Traps "
2002,ASME,"ASME B31.11 Slurry Transportation Piping Systems "
2010,ASME,"ASME A17.6 Standard for Elevator Suspension, Compensation, and Governor Systems "
2010,ASME,"ASME B30.9 Slings "
2010,ASME,"ASME A112.6.7 Sanitary Floor Sinks "
2009,ASME,"ASME A112.18.6 Flexible Water Connectors "
2010,ASME,"ASME B31.3 Process Piping "
2010,ASME,"ASME PTC 19.2 Pressure Measurement Instruments and Apparatus Supplement "
2011,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings "
2011,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators "
2010,ASME,"ASME B31.1 Power Piping "
1983,ASME,"ASME A112.21.2M Roof Drains "
2009,ASME,"ASME A112.4.1 Water Heater Relief Valve Drain Tubes "
2005,ASME,"ASME B16.48 Line Blanks "
2010,ASME,"ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks "
2011,ASME,"ASME B31.9 Building Services Piping "
2009,ASME,"ASME A112.4.2 Water Closet Personal Hygiene Devices "
2010,ASME,"ASME PTC PM Performance Monitoring Guidelines for Power Plants "
1985,ASME,"ASME A112.21.3M Hydrants for Utility and Maintenance Use "
2011,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
2010,ASME,"ASME B30.22 Articulating Boom Cranes "
2000,ASME,"ASME A17.1 Elevator Code "
2001,ASME,"ASME B18.2.3.4M Metric Hex Flange Screws "
1981,ASME,"ASME Y14.13M Mechanical Spring Representation "
1979,ASME,"ASME B18.2.3.7M Metric Heavy Hex Structural Bolts "
2003,ASME,"ASME B107.27 Pliers: Multiple Position, Electrical Connector "
1999,ASME,"ASME B18.2.3.1M Metric Hex Cap Screws "
2004,ASME,"ASME Y14.100 Engineering Drawing Practices "
2005,ASME,"ASME QAI-1 Qualifications for Authorized Inspection "
2011,ASME,"ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures "
2003,ASME,"ASME MFC-14M Measurement of Fluid Flow Using Small Bore Precision Orifice Meters "
1984,ASME,"ASME B94.6 Knurling "
1999,ASME,"ASME B89.7.2 Dimensional Measurement Planning "
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads "
1978,ASME,"ASME B94.53 Solid Steel Rectangular Metal Cutting Squaring Shear Knives-Dimensional Tolerances "
1993,ASME,"ASME B29.1M Precision Power Transmission Roller Chains, Attachments And Sprockets "
1964,ASME,"ASME B5.18 Spindle Noses and Tool Shanks for Milling Machines "
2002,ASME,"ASME B107.33M Socket Wrenches, Impact "
2010,ASME,"ASME B18.6.3 Machine Screws, Tapping Screws, and Metallic Drive Screws "
2004,ASME,"ASME B18.16M Prevailing-Torque-Type Steel Metric Hex Nuts and Hex Flange Nuts "
1998,ASME,"ASME PTC 19.1 Test Uncertainty "
1986,ASME,"ASME B18.3.5M Hexagon Socket Flat Countersunk Head Cap Screws "
1985,ASME,"ASME B89.3.4 Axes of Rotation-Methods for Specifying & Testing "
1998,ASME,"ASME B107.38M Electronic Pliers "
1990,ASME,"ASME B18.5.2.3M Round Head Square Neck Bolts with Large Head "
2011,ASME,"ASME B18.18 Quality Assurance for Fasteners "
1997,ASME,"ASME Y14.35M Revision of Engineering Drawings and Associated Documents "
1980,ASME,"ASME B94.7 Hobs "
1994,ASME,"ASME B107.14M Hand Torque Tools"
2003,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts "
2001,ASME,"ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process "
1999,ASME,"ASME B94.52M Specifications for Hack Saw Blades "
1996,ASME,"ASME MFC-4M Measurement of Gas Flow by Turbine Meters "
2010,ASME,"ASME PCC-1 Guidelines for Pressure Boundary Bolted Flange Joint Assembly "
2003,ASME,"ASME B107.34 Socket Wrenches for Spark Plugs "
2003,ASME,"ASME B5.61 Power Presses: General Purpose, Single-Action, Straight Side Type "
2006,ASME,"ASME MFC-13M Measurement of Fluid Flow in Closed Conduits: Tracer Methods "
1996,ASME,"ASME B18.2.3.10M Square Head Bolts "
2000,ASME,"ASME PCC-1 Guidelines for Pressure Boundary Bolted Flange Joint Assembly "
1996,ASME,"ASME Y14.36M Surface Texture Symbols "
1998,ASME,"ASME B18.18.5M Inspection and Quality Assurance Plan Requiring In-Process Inspection and Control "
2001,ASME,"ASME B29.26 Fatigue Testing Power Transmission Roller Chain "
2010,ASME,"ASME MFC-21.2 Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters "
2007,ASME,"ASME Y14.38 Abbreviations and Acronyms for Use on Drawings and Related Documents "
2008,ASME,"ASME B18.5 Round Head Bolts "
1994,ASME,"ASME B5.56M Specification and Performance Standard Power Shears "
2008,ASME,"ASME B18.31.1M Metric Continuous and Double-End Studs "
2011,ASME,"ASME B18.13.1M Screw and Washer Assemblies-Sems "
2002,ASME,"ASME B18.2.7.1M Metric 12-Spline Flange Screws "
2001,ASME,"ASME MFC-8M Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary & Secondary Devices "
1993,ASME,"ASME B18.29.1 Helical Coil Screw Threaded Inserts - Free Running and Screw Locking "
2002,ASME,"ASME B29.24 Roller Load Chains for Overhead Hoists "
1998,ASME,"ASME B89.1.5 Measurement of Plain External Diameters for use as Master Discs or Cylindrical Plug Gages "
2008,ASME,"ASME Y14.34 Associated Lists "
1994,ASME,"ASME A112.19.1 Enameled Cast Iron Plumbing Fixtures "
2008,ASME,"ASME B18.21.3 Double Coil Helical Spring Lock Washers for Wood Structures "
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols"
2005,ASME,"ASME B18.29.2M Helical Coil Screw Thread Inserts: Free Running and Screw Locking "
2008,ASME,"ASME Y14.2 Line Conventions and Lettering "
1991,ASME,"ASME B89.1.2M Calibration of Gage Blocks by Contact Comparison Methods, Through 20 in. and 500 mm"
1967,ASME,"ASME Y32.10 Graphic Symbols for Fluid Power Diagrams "
2006,ASME,"ASME TDP-1 Recommended Practices for Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fuel Plants "
1997,ASME,"ASME B94.19 Milling Cutters and End Mills "
2008,ASME,"ASME A120.1 Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance "
1998,ASME,"ASME B18.25.3M Square and Rectangular Keys and Keyways: Width Tolerances and Deviations Greater Than Basic Size "
1972,ASME,"ASME B94.35 Drill Drivers, Split-Sleeve, Collet Type "
2004,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines "
2006,ASME,"ASME B31Q Pipeline Personnel Qualification "
1987,ASME,"ASME MFC-7M Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles "
2008,ASME,"ASME B18.2.4.5M Metric Hex Jam Nuts "
1997,ASME,"ASME B29.10M Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth "
1979,ASME,"ASME B18.2.3.6M Metric Heavy Hex Bolts "
2011,ASME,"ASME B16-42-2011 "
2002,ASME,"ASME B107.36 Pliers: Locking, Clamp, and Tubing Pinch-Off "
2007,ASME,"ASME B89.7.3.2 Guidelines for the Evaluation of Dimensional Measurement Uncertainty "
1998,ASME,"ASME B18.15M Metric Lifting Eyes "
2007,ASME,"ASME B18.2.9 Straightness Gage and Gaging for Bolts and Screws "
1994,ASME,"ASME Y14.32.1M Chassis Frames-Passenger Car and Light Truck-Ground Vehicle Practices "
2008,ASME,"ASME B18.16.6 Nylon Insert Locknuts "
2000,ASME,"ASME PTC 6 Appendix A to PTC 6 The Test Code for Steam Turbines "
2003,ASME,"ASME B30.16 Overhead Hoists "
1996,ASME,"ASME B94.33 Jig Bushings "
2007,ASME,"ASME PCC-3 Inspection Planning Using Risk-Based Methods "
2005,ASME,"ASME QRO-1 Standard for the Qualification and Certification of Resource Recovery Facility Operators "
2007,ASME,"ASME FFS-1 Fitness-For-Service "
1999,ASME,"ASME B94.51M Specifications for Band Saw Blades "
2010,ASME,"ASME EA-4G Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010] "
2009,ASME,"ASME B18.2.5M Metric 12-Point Flange Screws "
2008,ASME,"ASME MFC-19G Wet Gas Flowmetering Guideline "
1978,ASME,"ASME B133.5 Procurement Standard For Gas Turbine Electrical Equipment "
2006,ASME,"ASME B18.2.6 Fasteners for Use in Structural Applications "
1996,ASME,"ASME B29.21M 700 Class Welded Steel and Cast Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants "
1972,ASME,"ASME B27.6 General Purpose Uniform Cross Section Spiral Retaining Rings "
2010,ASME,"ASME B18.6.8 Thumb Screws and Wing Screws "
2008,ASME,"ASME Y14.44 Reference Designations for Electrical and Electronics Parts and Equipment "
2002,ASME,"ASME B107.24 Locking Pliers "
1982,ASME,"ASME SI-1 ASME Orientation and Guide for Use of SI-1 "
1979,ASME,"ASME B18.2.3.5M Metric Hex Bolts "
1968,ASME,"ASME B94.21 Gear Shaper Cutters "
2008,ASME,"ASME RT-2 Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles "
2010,ASME,"ASME PTB-3 ASME Section VIII-Division 2 Example Problem Manual "
1994,ASME,"ASME B5.55M Specification and Performance Standard Power Press Brakes "
1993,ASME,"ASME N626.3 Qualifications And Duties Of Specialized Professional Engineers "
2007,ASME,"ASME B18.18.1 Inspection and Quality Assurance for General Purpose Fasteners "
1997,ASME,"ASME B29.15M Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth "
1994,ASME,"ASME Y14.5.1M Mathematical Definition of Dimensioning and Tolerancing Principles "
1972,ASME,"ASME B5.47 Milling Machine Arbor Assemblies "
2001,ASME,"ASME B89.1.17 Measurement of Thread Measuring Wires "
1997,ASME,"ASME B29.12M Steel Bushed Rollerless Chains, Attachments and Sprocket Teeth "
1985,ASME,"ASME MFC-5M Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters "
1985,ASME,"ASME B94.55M Tool Life Testing with Single - Point Turning Tools "
1986,ASME,"ASME B18.3.4M Hexagon Socket Button Head Cap Screws "
2010,ASME,"ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts "
1978,ASME,"ASME Y14.7.2 Gear and Spline Drawing Standards-Part 2: Bevel and Hypoid Gears "
1995,ASME,"ASME B94.2 Reamers "
2002,ASME,"ASME B107.25 Pliers: Performance Test Methods "
2007,ASME,"ASME B18.9 Plow Bolts "
1973,ASME,"ASME B89.6.2 Temperature and Humidity Environment for Dimensional Measurement "
1977,ASME,"ASME B5.40 Spindle Noses and Tool Shanks for Horizontal Boring Machines "
2008,ASME,"ASME PCC-2 Repair of Pressure Equipment and Piping "
2001,ASME,"ASME MFC-18M Measurement of Fluid Flow using Variable Area Meters "
2011,ASME,"ASME MFC-5.1 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters "
1986,ASME,"ASME B18.3.1M Socket Head Cap Screws "
2010,ASME,"ASME EA-4 Energy Assessment for Compressed Air Systems "
2011,ASME,"ASME PCC-2 Repair of Pressure Equipment and Piping "
1973,ASME,"ASME B1.9 Buttress Inch Screw Threads "
1972,ASME,"ASME Y32.7 Graphics Symbols for Railroad Maps and Profiles "
2005,ASME,"ASME B18.2.4.2M Metric Hex Nuts, Style 2 "
1979,ASME,"ASME B18.2.4.3M Metric Slotted Hex Nuts "
1993,ASME,"ASME NQA COMPARISON NQA 1&ISO 9001 TECH "
1989,ASME,"ASME Y14.4M Pictorial Drawing "
2007,ASME,"ASME N511 In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air-Conditioning Systems "
2008,ASME,"ASME B89.4.10360.2 Acceptance Test and Reverification Test for Coordinate Measuring Machines "
2004,ASME,"ASME B30.1 Jacks "
2010,ASME,"ASME A112.14.6-2010-D "
2009,ASME,"ASME OM Operation and Maintenance of Nuclear Power Plants "
2010,ASME,"ASME B18.6.9 Wing Nuts "
2005,ASME,"ASME Y14.1M Metric Drawing Sheet Size and Format "
2007,ASME,"ASME B29.2M Inverted Tooth "
1975,ASME,"ASME B94.49 Spade Drill Blades and Spade Drill Holders "
2009,ASME,"ASME RT-1 Safety Standard for Structural Requirements for Light Rail Vehicles "
2003,ASME,"ASME B5.52 Power Presses: General Purpose, Single-Point Gap Type "
2011,ASME,"ASME B16.47-2011 "
2003,ASME,"ASME PVHO-2 Safety Standard for Pressure Vessels for Human Occupancy: In-Service PVHO Acrylic Windows Guidelines "
2011,ASME,"ASME STS-1-2011 "
2005,ASME,"ASME B5.54 Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers "
1983,ASME,"ASME B5.35 Machine Mounting Specifications for Abrasive Discs and Plate Mounted Wheels "
1999,ASME,"ASME B18.2.8 Clearance Holes for Bolts Screws and Studs "
2008,ASME,"ASME B107.600 Screwdrivers "
1994,ASME,"ASME B133.9 Measurement Of Exhaust Emissions From Stationary Gas Turbine Engines "
2005,ASME,"ASME B107.4 Driving and Spindle Ends for Portable Hand, Impact, Air and Electric Tools "
2009,ASME,"ASME B5.50 7/24 Taper Tool to Spindle Connection for Automatic Tool Change "
1994,ASME,"ASME Y14.5 Dimensioning and Tolerancing "
2010,ASME,"ASME B29.8 Leaf Chains, Clevises and Sheaves "
2005,ASME,"ASME B1.13M Metric Screw Threads: M Profile "
2004,ASME,"ASME B30.14 Side Boom Tractors "
2011,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
2005,ASME,"ASME B18.2.3.2M Metric Formed Hex Screws "
2004,ASME,"ASME B107.12 Nutdrivers "
1984,ASME,"ASME B1.16M Gages and Gaging for Metric M Screw Threads "
2002,ASME,"ASME Y14.42 Digital Approval Systems "
2000,ASME,"ASME B133.16 Procurement Standard For Gas Turbine Marine Applications "
2002,ASME,"ASME B107.55 Axes: Safety Requirements "
2001,ASME,"ASME B18.12 Glossary of Terms for Mechanical Fasteners "
1982,ASME,"ASME B18.2.4.4M Metric Hex Flange Nuts "
1979,ASME,"ASME B94.37M Roller Turner Type Cutting Tools Single Point "
2002,ASME,"ASME PTC 18 Hydraulic Turbines and Pump-Turbines "
2009,ASME,"ASME B18.31.4M Threaded Rod "
1999,ASME,"ASME Y14.24 Types and Applications of Engineering Drawings "
2004,ASME,"ASME B107.23 Pliers: Multiple Position, Adjustable "
1998,ASME,"ASME B107.22M Electric Cutters "
1987,ASME,"ASME B1.12M Class 5 Interference-Fit Thread "
2009,ASME,"ASME Y14.5 Dimensioning and Tolerancing "
2001,ASME,"ASME B29.200 Welded-Steel-Type Mill Chains, Welded-Steel-Type Drag Chains, Attachments, and Sprocket Teeth "
2011,ASME,"ASME B30.23 Personnel Lifting Systems "
2002,ASME,"ASME B89.1.9 Gage Blocks "
2001,ASME,"ASME B18.2.3.9M Metric Heavy Hex Flange Screws "
2009,ASME,"ASME BPE Bioprocessing Equipment "
2003,ASME,"ASME B73.3 Specification for Sealless Horizontal End Suction Metallic Centrifugal Pumps for Chemical Process "
1983,ASME,"ASME B18.1.3M Metric Small Solid Rivets "
2001,ASME,"ASME B89.1.13 Micrometers "
2010,ASME,"ASME B18.2.6 Fasteners for use in Structural Applications "
2010,ASME,"ASME B89.3.4 Axes of Rotation: Methods for Specifying and Testing "
2005,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators "
1998,ASME,"ASME B18.18.6M Quality Assurance Plan For Fasteners Produced in A Third Party Accreditation System "
2010,ASME,"ASME EA-1G Guidance for ASME EA-1, Energy Assessment for Process Heating Systems [ANSI designation: ASME TR EA-1G-2010] "
2003,ASME,"ASME B107.37 Pliers: Wire Cutters/Strippers "
2005,ASME,"ASME B32.100 Preferred Metric Sizes for Flat, Round, Square, Rectangular and Hexagonal Metal Products "
2004,ASME,"ASME B32.5 Preferred Metric Sizes for Tubular Metal Products OtherThan Pipe "
2009,ASME,"ASME PTB-2 Guide to Life Cycle Management of Pressure Equipment Integrity "
1985,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue "
2008,ASME,"ASME BTH-1 Design of Below-the-Hook Lifting Devices "
1996,ASME,"ASME B18.25.1M Square and Rectangular Keys and Keyways "
2000,ASME,"ASME B89.4.10 Methods for Performance Evaluation of Coordinate Measuring System Software "
2003,ASME,"ASME B30.4 Portal, Tower, and Pedestal Cranes "
2009,ASME,"ASME PTB-1 ASME Section VIII Division 2 Criteria and Commentary "
1972,ASME,"ASME B18.1.2 Large Rivets "
1995,ASME,"ASME B73.5M Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps Chemical Process "
2010,ASME,"ASME ASP Safety Standard for Automotive Service and Maintenance Products "
1977,ASME,"ASME B133.8 Gas Turbine Installation Sound Emissions "
2010,ASME,"ASME EA-3G Guidance for ASME EA-3, Energy Assessment for Steam Systems [ANSI designation: ASME TR EA-3G-2010] "
1978,ASME,"ASME B4.2 Preferred Metric Limits and Fits "
2007,ASME,"ASME B18.7 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps "
1991,ASME,"ASME B1.20.5 Gaging for Dryseal Pipe Threads-Inch "
2008,ASME,"ASME B18.16.4 Serrated Hex Flange Locknuts: 90,000 psi "
2009,ASME,"ASME B18.31.3 Threaded Rods "
2004,ASME,"ASME B30.5 Mobile and Locomotive Cranes "
2009,ASME,"ASME B89.1.7 Performance Standard for Steel Measuring Tapes "
2001,ASME,"ASME Y14.6 Screw Thread Representation "
2010,ASME,"ASME QAI-1 Qualifications for Authorized Inspection "
2002,ASME,"ASME A112.19.17-2002 "
2002,ASME,"ASME B107.5M Socket Wrenches, Hand "
1971,ASME,"ASME Y14.7.1 Gear Drawing Standards-Parts 1: For Spur, Helical, Double Helical and Rack "
1998,ASME,"ASME B29.17M Hinge Type Flat Top Conveyor Chains and Sprocket Teeth "
2004,ASME,"ASME B89.4.22 Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines "
2009,ASME,"ASME EA-2 Energy Assessment for Pumping Systems "
1998,ASME,"ASME B29.300 Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets - With Addenda A -05312004"
1993,ASME,"ASME B94.11M Twist Drills "
2007,ASME,"ASME MFC-16 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters "
2008,ASME,"ASME B94.9 Taps: Ground Thread with Cut Thread Appendix "
1972,ASME,"ASME B89.3.1 Measurement of Out-of-Roundness "
2002,ASME,"ASME B89.7.3.3 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements "
1987,ASME,"ASME B18.18.1 Inspection And Quality Assurance For General Purpose Fasteners "
1972,ASME,"ASME B18.1.1 Small Solid Rivets "
2011,ASME,"ASME B18.31.5 Bent Bolts (Inch Series)"
2003,ASME,"ASME MFC-1M Glossary of Terms used in the Measurement of Fluid Flow in Pipes "
2007,ASME,"ASME A17.1 Handbook on Safety Code for Elevators and Escalators "
2006,ASME,"ASME B89.7.5 Metrological Traceability of Dimensional Measurements to the SI Unit of Length "
1987,ASME,"ASME B18.18.4M Inspection and Quality Assurance for Highly Specialized Engineered Applications for Metric Fasteners "
2011,ASME,"ASME PTC 6.2 Steam Turbines in Combined Cycles "
2010,ASME,"ASME B107.500 Pliers "
2003,ASME,"ASME B30.17 Overhead and Gantry Cranes "
2010,ASME,"ASME B18.29.1 Helical Coil Screw Thread Inserts--Free Running and Screw Locking "
1967,ASME,"ASME B5.9 Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes and Automatic Lathes "
1983,ASME,"ASME MFC-2M Measurement Uncertainty for Fluid Flow in Closed Conduits "
2008,ASME,"ASME B18.31.2 Continuous and Double-End Studs "
2003,ASME,"ASME Y14.3 Multiview and Sectional View Drawings "
2010,ASME,"ASME B107.17 Gages and Mandrels for Wrench Openings "
1986,ASME,"ASME B18.3.6M Socket Set Screws "
2007,ASME,"ASME QME-1 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants "
1958,ASME,"ASME B1.11 Microscope Objective Thread "
2005,ASME,"ASME B107.10 Handles and Attachments for Hand Socket Wrenches "
2007,ASME,"ASME B47.1 Gage Blanks "
2005,ASME,"ASME Y14.1 Decimal Inch Drawing Sheet Size and Format "
2011,ASME,"ASME RTP-1 Reinforced Thermoset Plastic Corrosion-Resistant Equipment "
2002,ASME,"ASME B107.1 Socket Wrenches, Hand "
2011,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts "
2009,ASME,"ASME B18.18.2 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners "
1997,ASME,"ASME B1.5 Acme Screw Threads"
1979,ASME,"ASME B18.3.2M Metric Series Hexagon Keys and Bits"
1994,ASME,"ASME B18.8.1 Clevis Pins and Cotter Pins "
1998,ASME,"ASME MFC-6M Measurement of Fluid Flow in Pipes using Vortex Flowmeters "
2004,ASME,"ASME A17.5 Elevator and Escalator Electrical Equipment "
1985,ASME,"ASME B133.7M Gas Turbine Fuels "
2000,ASME,"ASME Y14.5.2 Certification of Geometric Dimensioning and Tolerancing Professionals "
2009,ASME,"ASME PALD Safety Standard for Portable Automotive Lifting Devices "
2006,ASME,"ASME MFC-12M Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements "
1998,ASME,"ASME B18.18.7M Quality Assurance Plan for Fasteners Produced in A Customer Approved Control Plan "
2007,ASME,"ASME PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy "
1988,ASME,"ASME PTC 6S Procedures for Routine Performance Test of Steam Turbines "
1995,ASME,"ASME B1.15 Unified Inch Screw Threads, (UNJ Thread Form)"
2002,ASME,"ASME B5.60 Workholding Chucks: Jaw Type Chucks "
1972,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue "
1972,ASME,"ASME Y32.18 Symbols For Mechanical And Acoustical Elements As Used In Schematic Diagrams "
1961,ASME,"ASME B18.11 Miniature Screws "
2009,ASME,"ASME Y14.8 Casting, Forgings, and Molded Parts "
2009,ASME,"ASME FFS-2 Fitness-for-Service Example Problem Manual "
2010,ASME,"ASME B107.300 Torque Instruments "
2002,ASME,"ASME B29.27 Single Pitch and Double Pitch Hollow Pin Conveyor Chains and Attachments "
2004,ASME,"ASME B107.14 Hand Torque Tools "
2003,ASME,"ASME B30.9 Slings "
1985,ASME,"ASME B1.22M Gages and Gaging for MJ Metric Screw Threads "
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets "
2010,ASME,"ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws "
2009,ASME,"ASME EA-1 Energy Assessment for Process Heating Systems "
2001,ASME,"ASME B29.22 Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs "
2003,ASME,"ASME Y14.41 Digital Product Definition Data Practices "
1994,ASME,"ASME B5.11 Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads "
1981,ASME,"ASME B133.12 Procurement Standard For Gas Turbine Maintenance And Safety "
2007,ASME,"ASME OM-S/G Standards and Guides for Operation and Maintenance of Nuclear Power Plants "
2008,ASME,"ASME B107.410 Struck Tools "
2006,ASME,"ASME MFC-11 Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters "
2002,ASME,"ASME B89.1.6 Measurement of Plain Internal Diameters for use as a Master Rings or Ring Guages "
2005,ASME,"ASME PALD Safety Standard for Portable Automotive Lifting Devices "
2003,ASME,"ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures "
2004,ASME,"ASME B30.26 Rigging Hardware "
2007,ASME,"ASME B18.2.3.3M Metric Heavy Hex Screws "
2010,ASME,"ASME B107.100 Flat Wrenches "
2011,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges & Flanged Fittings: Class 150,300,400,600,900,1500 & 2500 "
1998,ASME,"ASME TDP-1 Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation "
1997,ASME,"ASME B107.17M Gages, Wrench Openings, Reference "
2003,ASME,"ASME B73.2 Specifications for Vertical In-Line Centrifugal Pumps for Chemical Process "
2006,ASME,"ASME A112.14.6 FOG  Disposal Systems "
2011,ASME,"ASME B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes "
2011,ASME,"ASME A112.18.9 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures "
1998,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
1998,ASME,"ASME B107.16M Shears: Metal Cutting Hand "
2008,ASME,"ASME Y14.31 Undimensioned Drawings "
2000,ASME,"ASME B18.8.100M Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins "
1988,ASME,"ASME B1.8-1988 Stub Acme Screw Threads "
2010,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines "
2001,ASME,"ASME B5.8 Chuck and Chuck Jaws "
2002,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators  "
2010,ASME,"ASME EA-2G Guidance for ASME EA-2, Energy Assessment for Pumping Systems [ANSI designation: ASME TR EA-2G-2010] "
1996,ASME,"ASME B18.25.2M-1996 (R2008) Woodruff Keys and Keyways"
2002,ASME,"ASME B29.8 Leaf Chains, Clevises, and Sheaves "
2000,ASME,"ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins "
1975,ASME,"ASME N278.1 Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard "
2003,ASME,"ASME AG-1 Code on Nuclear Air and Gas Treatment"
2004,ASME,"ASME QHO-1 Standard for the Qualification and Certification of Hazardous Waste Incinerator Operators "
2011,ASME,"ASME MFC-26 Measurement of Gas Flow by Bellmouth Inlet Flowmeters "
1998,ASME,"ASME B94.33.1 Jig Bushings, Metric "
1978,ASME,"ASME B4.3 General Tolerances for Metric Dimensioned Products "
1988,ASME,"ASME MFC-9M Measurement of Liquid Flow in Closed Conduits by Weighing Method "
2004,ASME,"ASME OM Code for Operation and Maintenance of Nuclear Power Plants "
2006,ASME,"ASME B89.4.19 Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems "
2005,ASME,"ASME B89.7.4.1 Measurement Uncertainty and Conformance Testing: Risk Analysis "
2002,ASME,"ASME B107.2 Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive "
2007,ASME,"ASME RTP-1 Reinforced Thermoset Plastic Corrosion Resistant Equipment "
2010,ASME,"ASME B18.2.9 Straightness Gage and Gaging for Bolts and Screws "
1987,ASME,"ASME B18.18.3M Inspection and Quality Assurance for Special Purpose Fasteners "
2009,ASME,"ASME EA-3 Energy Assessment for Steam Systems "
2001,ASME,"ASME B89.1.10M Dial Indicators "
1977,ASME,"ASME Y32.4 Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture & Building Construction "
1999,ASME,"ASME B94.54 Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories "
1985,ASME,"ASME B18.15 Forged Eyebolts "
1977,ASME,"ASME B5.48 Ball Screws "
2007,ASME,"ASME MFC-22 Measurement of Liquid by Turbine Flowmeters "
2001,ASME,"ASME B89.7.3.1 Guidelines for Decision Rules: Considering Measurement Uncertainty Determining Conformance to Specifications "
1995,ASME,"ASME B107.4 Driving & Spindle Ends For Portable Hand, Impact, Air & Electric Tools -Percussion Tools Excluded "
2012,ASME,"ASME B18.12 Glossary of Terms for Mechanical Fasteners"
2011,ASME,"ASME BTH-1 Design of Below-the-Hook Lifting Devices"
2011,ASME,"ASME B29.1 Precision Power Transmission Roller Chains, Attachments, and Sprockets"
2011,ASME,"ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings"
2011,ASME,"ASME A112.18.2 Plumbing waste fittings"
2011,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2011,ASME,"ASME A112.18.1 Plumbing supply fittings"
2012,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (for Plumbing Fixtures and Water-Connected Receptors)"
2000,ASME,"ASME A112.1.3 Air Gap Fittings for use with Plumbing Fixtures, Appliances, and Appurtenances"
2001,ASME,"ASME A112.14.4 Grease Removal Devices"
2011,ASME,"ASME A112.18.1 Plumbing Supply Fittings with Update No. 1"
2012,ASME,"ASME A19.15 Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors"
2012,ASME,"ASME A19.5 Flush Valves and Spuds for Water Closets, Urinals, and Tanks (with Update No.1)"
2012,ASME,"ASME A19.7 Hydromassage Bathtub Systems"
2007,ASME,"ASME A112.3.1 Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground"
2012,ASME,"ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks"
2007,ASME,"ASME A17.7 Performance-Based Safety Code for Elevators and Escalators"
2005,ASME,"ASME B1.13M Metric Screw Threads: M Profile"
2012,ASME,"ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2012,ASME,"ASME B16.25 Buttwelding Ends"
2012,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
2012,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2)"
2012,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum"
2012,ASME,"ASME B16.44 Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up to 5 psi"
1996,ASME,"ASME B18.13 Screw and Washer Assemblies-Sems (Inch Series)"
2012,ASME,"ASME B18.2.6M Metric Fasteners for Use in Structural Applications"
2012,ASME,"ASME B18.5 Round Head Bolts (Inch Series)"
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets"
2007,ASME,"ASME B18.7 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps"
2012,ASME,"ASME B18.9 Plow Bolts"
2012,ASME,"ASME B20.1 Safety Standard for Conveyors and Related Equipment"
2007,ASME,"ASME B29.2M Inverted Tooth (Silent) Chains and Sprockets"
2012,ASME,"ASME B30.16 Overhead Hoists (Underhung)"
2006,ASME,"ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)"
2012,ASME,"ASME B31.1 Power Piping"
2010,ASME,"ASME B31.3 ES Tuber"
2012,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid and Slurries"
2012,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2010,ASME,"ASME B31.8S ES Gesti"
2012,ASME,"ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines"
2010,ASME,"ASME B31Q ES Calificaci"
2002,ASME,"ASME B89.1.6 Measurement of Plain Internal Diameters for use as a Master Rings or Ring Guages"
2011,ASME,"ASME B89.1.8 Performance Evaluation of Displacement-Measuring Laser Interferometers"
1973,ASME,"ASME B89.6.2 Temperature and Humidity Environment for Dimensional Measurement"
2002,ASME,"ASME B89.7.3.3 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements"
2012,ASME,"ASME BPE Bioprocessing Equipment"
2012,ASME,"ASME CSD-1 Controls and Safety Devices for Automatically Fired Boilers"
2012,ASME,"ASME Forging a New Nuclear Safety Construct: The ASME Presidential Task Force on Response to Japan Nuclear Power Plant Events (June 2012)"
2012,ASME,"ASME HST-1 Performance Standard for Electric Chain Hoists"
2012,ASME,"ASME PTB-4 ASME Section VIII-Division 1 Example Problem Manual"
1973,ASME,"ASME PTC 17 Reciprocating Internal-Combustion Engines"
2007,ASME,"ASME PTC 19.22 Data Acquisition Systems"
2007,ASME,"ASME PTC 30.1 Air-Cooled Steam Condensers"
2011,ASME,"ASME PTC 31 High-Purity Water Treatment Systems"
2012,ASME,"ASME PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy"
2012,ASME,"ASME TDP-2 Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants"
2012,ASME,"ASME Y14.37 Composite Part Drawings"
2012,ASME,"ASME Y14.41 Digital Product Definition Data Practices"
1994,ASME,"ASME Y14.5.1M Mathematical Definition of Dimensioning and Tolerancing Principles"
2013,ASME,"ASME B16.34 Valves - Flanged, Threaded, and Welding End"
2012,ASME,"ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)"
2012,ASME,"ASME B18.3 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)"
2013,ASME,"ASME Forging a New Nuclear Safety Construct - Workshop Summary"
2012,ASME,"ASME OM Operation and Maintenance of Nuclear Power Plants"
2013,ASME,"ASME PTB 5 Section VIII - Division 3 Example Problem Manual"
2004,ASME,"ASME PTC 19.5 Flow Measurement"
2004,ASME,"ASME PTC 36 Measurement of Industrial Sound"
2012,ASME,"ASME Y14.1M Metric Drawing Sheet Size and Format"
2012,ASME,"ASME Y14.24 Types and Applications of Engineering Drawings"
2013,ASME,"ASME A112.19.1 / CSA B45.2 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures"
2013,ASME,"ASME A112.19.2 /CSA B45.1 Ceramic Plumbing Fixtures"
2012,ASME,"ASME AG-1 Code on Nuclear Air and Gas Treatment"
1987,ASME,"ASME B1.12 Class 5 Interference-Fit Thread - Reaffirmed 2013"
1976,ASME,"ASME B1.20.3 Dryseal Pipe Threads,Inch - Reaffirmed 2013"
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads, Inch - Reaffirmed 2013"
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile - Reaffirmed 2013"
2012,ASME,"ASME B107.110 Socket Wrenches, Handles, and Attachments"
1993,ASME,"ASME B1 Technical Report Measurement Uncertainty for 60 Deg. Screw Thread Gage Element Measurement - (Inch & Metric)"
2012,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed"
2013,ASME,"ASME B16.26  Cast Copper Alloy Fittings for Flared Copper Tubes"
2013,ASME,"ASME B16.50 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings"
2013,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard"
1967,ASME,"ASME B17.1 Keys and Keyseats - Reaffirmed 2013"
1967,ASME,"ASME B17.2 Woodruff Keys and Keyseats - Reaffirmed 2013"
1996,ASME,"ASME B18.13 Screw and Washer Assemblies-Sems (Inch Series) - Reaffirmed 2013"
2008,ASME,"ASME B18.16.4 Serrated Hex Flange Locknuts: 90,000 psi (Inch Series) - Reaffirmed 2013"
2013,ASME,"ASME B18.2.5M Metric 12-Point Flange Head Screws"
2008,ASME,"ASME B18.21.3 Double Coil Helical Spring Lock Washers for Wood Structures - Reaffirmed 2013"
1997,ASME,"ASME B29.12M Steel Bushed Rollerless Chains, Attachments and Sprocket Teeth - Reaffirmed 2013"
1998,ASME,"ASME B29.17M Hinge Type Flat Top Conveyor Chains and Sprocket Teeth - Reaffirmed 2013"
2013,ASME,"ASME B30.24 Container Cranes"
2013,ASME,"ASME B30.25 Scrap and Material Handlers"
2013,ASME,"ASME B31.5 Refrigeration Piping and Heat Transfer Components"
2008,ASME,"ASME B31J M"
1994,ASME,"ASME B5.10 Machine Tapers-Self Holding and Steep Taper Series - Reaffirmed 2013"
1964,ASME,"ASME B5.11 Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads - Reaffirmed 2013"
1983,ASME,"ASME B5.35 Machine Mounting Specifications for Abrasive Discs and Plate Mounted Wheels - Reaffirmed 2013"
1977,ASME,"ASME B5.40 Spindle Noses and Tool Shanks for Horizontal Boring Machines - Reaffirmed 2013"
1972,ASME,"ASME B5.47 Milling Machine Arbor Assemblies - Reaffirmed 2013"
1977,ASME,"ASME B5.48 Ball Screws - Reaffirmed 2013"
1994,ASME,"ASME B5.55M Specification and Performance Standard Power Press Brakes - Reaffirmed: 2013"
2012,ASME,"ASME B5.57 Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers"
2012,ASME,"ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process"
2013,ASME,"ASME B89.1.13 Micrometers"
2013,ASME,"ASME B89.3.7 Granite Surface Plates"
2008,ASME,"ASME B94.9 Taps: Ground Thread with Cut Thread Appendix (Inch and Metric Sizes) - Reaffirmed 2013"
2013,ASME,"ASME CA-1 Conformity Assessment Requirements"
1983,ASME,"ASME MFC-2M Measurement Uncertainty for Fluid Flow in Closed Conduits - Reaffirmed 2013"
2013,ASME,"ASME MFC-5.3 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters"
2013,ASME,"ASME MFC-6 Measurement of Fluid Flow in Pipes Using Vortex Flowmeters"
2013,ASME,"ASME NTB-1 Training Program Reference Material for Use with ASME/ANS RA-Sa-2009"
2013,ASME,"ASME PTB-3 ASME Section VIII-Division 2 Example Problem Manual"
2013,ASME,"ASME PTB-4 ASME Section VIII-Division 1 Example Problem Manual"
2013,ASME,"ASME PTB-6 Guidelines for Strain Gaging of Pressure Vessels Subjected to External Pressure Loading in the PVHO-1 Standard"
1980,ASME,"ASME PTC-19.23 Guidance Manual for Model Testing - Reaffirmed 1985"
2012,ASME,"ASME PVHO-2 Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines"
2012,ASME,"ASME QME-1 Qualification of Active Mechanical Equipment Used in Nuclear Facilities"
2013,ASME,"ASME TDP-1 Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fuel Plants"
2013,ASME,"ASME Y14.100 Engineering Drawing Practices"
2012,ASME,"ASME Y14.3 Orthographic and Pictorial Views"
2007,ASME,"ASME Y14.38 Abbreviations and Acronyms for Use on Drawings and Related Documents - Reaffirmed 2013"
2001,ASME,"ASME Y14.6 Screw Thread Representation - Reaffirmed 2013"
1972,ASME,"ASME Y32.18 Symbols For Mechanical And Acoustical Elements As Used In Schematic Diagrams"
2012,ASME,"ASME B31.3 Process Piping"
2013,ASME,"ASME A17.1 / CSA B44 Safety Code for Elevators and Escalators"
2013,ASME,"ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings"
2013,ASME,"ASME QEI-1 Standard for the Qualification of Elevator Inspectors"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section I: Rules for Construction of Power Boilers"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section II: Materials - Part B: Nonferrous Material Specifications"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section III: Rules for Construction of Nuclear Facility Components, Division 2: Code for Concrete Containments"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section III: Rules for Construction of Nuclear Facility Components, Division 3: Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive Material and Waste"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section III: Rules for Construction of Nuclear Facility Components, Division 5: High Temperature Reactors"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section IV: Rules for Construction of Heating Boilers"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section IX: Welding, Brazing, and Fusing Qualifications: Qualification Standard for Welding, Brazing, and Fusing Procedures; Welders; Brazers; and Welding, Brazing and Fusing Operators"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section V: Nondestructive Examination"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VI: Recommended Rules for the Care and Operation of Heating Boilers"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VII: Recommended Guidelines for the Care of Power Boilers"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 1: Rules for Construction of Pressure Vessels"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 2: Alternative Rules"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section X: Fiber-Reinforced Plastic Pressure Vessels"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section XII: Rules for Construction and Continued Service of Transport Tanks"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2013,ASME,"ASME Boiler & Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2013,ASME,"ASME BPVC - VIII - 1 -2013 BPVC Section VIII, Division 1: Rules for Construction of Pressure Vessels"
2013,ASME,"ASME BPVC - VIII - 2 -2013 BPVC Section VIII, Division 2: Alternative Rules"
2013,ASME,"ASME BPVC - VIII - 3 -2013 BPVC Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2013,ASME,"ASME A112.19.14 Six-Liter Water Closets Equipped with a Dual Flushing Device"
2013,ASME,"ASME A112.19.2 Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals"
2013,ASME,"ASME A112.3.4 (CSA B45.9) Plumbing Fixtures with Pumped Waste and Macerating Toilet Systems"
2013,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings: Classes 125 and 250"
2014,ASME,"ASME B18.16.6 B18.16.6 - 2014 Prevailing Torque Locknuts (Inch Series)"
2000,ASME,"ASME B18.6.5M Metric Thread-Forming and Thread-Cutting Tapping Screws - Reaffirmed 2010"
2013,ASME,"ASME B29.21 700 Class Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants"
2013,ASME,"ASME B29.26 Fatigue Testing Power Transmission Roller Chain"
2014,ASME,"ASME B30.27 Material Placement Systems"
2014,ASME,"ASME B31.9 Building Services Piping"
1998,ASME,"ASME B89.1.5 Measurement of Plain External Diameters for use as Master Discs or Cylindrical Plug Gages - Reaffirmed 2009"
2014,ASME,"ASME MFC-16 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters"
2014,ASME,"ASME P30.1 Planning for Load Handling Activities"
2013,ASME,"ASME PDS-1.1 Dimensioning, Tolerancing, Surface Texture, and Metrology Standards-Rules for Drawings with Incomplete Reference to Applicable Drawing Standard"
2013,ASME,"ASME POM-101 Performance-Related Outage Inspections"
2008,ASME,"ASME PTC 4.4 Gas Turbine Heat Recovery Steam Generators - Reaffirmed: 2013"
2013,ASME,"ASME PTC-4 Fired Steam Generators"
2014,ASME,"ASME RT-2 Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles"
2013,ASME,"ASME RTP-1 Reinforced Thermoset Plastic Corrosion-Resistant Equipment"
2013,ASME,"ASME TR-A17.1-8.4 Guide for Elevator Seismic Design (Technical Report)"
2013,ASME,"ASME Y14.34 Associated Lists"
2009,ASME,"ASME A112.18.6/CSA B125.6 Flexible Water Connectors - Reaffirmed: 2014"
2008,ASME,"ASME A112.19.3/CSA B45.4 Stainless Steel Plumbing Fixtures"
2009,ASME,"ASME A112.4.1 Water Heater Relief Valve Drain Tubes - Reaffirmed: 2014"
2009,ASME,"ASME A112.4.2 Water Closet Personal Hygiene Devices - Reaffirmed: 2014"
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems -  Reaffirmed: 2013"
2013,ASME,"ASME A17.1/CSA B44 Handbook on Safety Code for Elevators and Escalators"
1997,ASME,"ASME B1.5 Acme Screw Threads - Reaffirmed: 2014"
2001,ASME,"ASME B18.2.3.9M Metric Heavy Hex Flange Screws - Reaffirmed: 2014"
1979,ASME,"ASME B18.2.4.3M Metric Slotted Hex Nuts - Reaffirmed: 2012"
2014,ASME,"ASME B30.21 Lever Hoists"
2014,ASME,"ASME B31.1 Power Piping"
2013,ASME,"ASME B31J Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components"
2014,ASME,"ASME B31Q Pipeline Personnel Qualification"
1972,ASME,"ASME B5.18 Spindle Noses and Tool Shanks for Milling Machines - Reaffirmed: 2014"
1985,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue - Reaffirmed: 2014"
2003,ASME,"ASME B5.52 Power Presses: General Purpose, Single-Point Gap Type - Reaffirmed: 2014"
2003,ASME,"ASME B5.61 Power Presses: General Purpose, Single-Action, Straight Side Type - Reaffirmed: 2014"
1967,ASME,"ASME B5.9 Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes and Automatic Lathes - Reaffirmed: 2014"
2009,ASME,"ASME B89.1.7 Performance Standard for Steel Measuring Tapes - Reaffirmed: 2014"
2004,ASME,"ASME B89.4.22 Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines (CMM) - Reaffirmed: 2014"
1997,ASME,"ASME B94.19 Milling Cutters and End Mills - Reaffirmed: 2014"
1968,ASME,"ASME B94.21 Gear Shaper Cutters - Reaffirmed: 2014"
1985,ASME,"ASME B94.55M Tool Life Testing with Single - Point Turning Tools - Reaffirmed: 2014"
1984,ASME,"ASME B94.6 Knurling - Reaffirmed: 2014"
2014,ASME,"ASME HST-5 Performance Standard for Air Chain Hoists"
2006,ASME,"ASME MFC-11 Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters - Reaffirmed: 2014"
2006,ASME,"ASME MFC-12M Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements - Reaffirmed: 2014"
2006,ASME,"ASME MFC-13M Measurement of Fluid Flow in Closed Conduits: Tracer Methods - Reaffirmed: 2014"
2007,ASME,"ASME MFC-22  Measurement of Liquid by Turbine Flowmeters - Reaffirmed: 2014"
1987,ASME,"ASME MFC-7M Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles - Reaffirmed: 2014"
2007,ASME,"ASME N511 In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air-Conditioning Systems - Reaffirmed: 2013"
2014,ASME,"ASME PTB-1 ASME Section VIII Division 2 Criteria and Commentary"
2014,ASME,"ASME PTB-7 2014 Criteria for Shell-and-Tube Heat Exchangers According to Part UHX of ASME Section VIII-Division 1"
1997,ASME,"ASME PTC 12.3 Performance Test Code on Deaerators - Reaffirmed: 2014"
1992,ASME,"ASME PTC 12.4  Moisture Separator Reheaters (MSRs) - Reaffirmed: 2014"
2008,ASME,"ASME PTC 19.11 Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle - Reaffirmed: 2013"
2013,ASME,"ASME PTC 19.1 Test Uncertainty"
2001,ASME,"ASME PTC 2 Definitions and Values Code - Reaffirmed: 2014"
2003,ASME,"ASME PTC 23 Atmospheric Water Cooling Equipment - Reaffirmed: 2014"
2014,ASME,"ASME PTC 25 Pressure Relief Devices"
2002,ASME,"ASME PTC 50 Fuel Cell Power Systems Performance - Reaffirmed: 2014"
2004,ASME,"ASME PTC 6 Steam Turbines - Reaffirmed: 2014"
1988,ASME,"ASME PTC 6S Procedures for Routine Performance Test of Steam Turbines - Reaffirmed: 2014"
2009,ASME,"ASME PTC 70 Ramp Rates - Reaffirmed: 2014"
2014,ASME,"ASME Y14.31 Undimensioned Drawings"
2009,ASME,"ASME Y14.8 Casting, Forgings, and Molded Parts  - Reaffirmed: 2014"
1972,ASME,"ASME Y32.7 Graphics Symbols for Railroad Maps and Profiles - Reaffirmed: 2014"
2013,ASME,"ASME BPVC - IX -2013 BPVC Section IX, Welding and Brazing Qualifications"
2000,ASME,"ASME A112.14.3 Grease Interceptors - Reaffirmed: 2014"
2009,ASME,"ASME A112.18.8 In-Line Sanitary Waste Valves for Plumbing Drainage Systems - Reaffirmed: 2014"
2014,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts"
1991,ASME,"ASME B1.20.5 Gaging for Dryseal Pipe Threads-Inch - Reaffirmed: 2014"
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings - Reaffirmed: 2014"
2014,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300"
2014,ASME,"ASME B18.31.2 Continuous Thread Stud, Double-End Stud, and Flange Bolting Stud (Stud Bolt) (Inch Series)"
2014,ASME,"ASME B30.5 Mobile and Locomotive Cranes"
2014,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2014,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines"
1994,ASME,"ASME B5.56M Specification and Performance Standard Power Shears - Reaffirmed: 2014"
1998,ASME,"ASME B89.1.5 - 1998: Measurement of Plain External Diameters for use as Master Discs or Cylindrical Plug Gages - Reapproved 2014"
2014,ASME,"ASME B89.7.2 Dimensional Measurement Planning"
2014,ASME,"ASME BPE Bioprocessing Equipment"
2014,ASME,"ASME BTH-1 Design of Below-the-Hook Lifting Devices"
2009,ASME,"ASME EA-1 Energy Assessment for Process Heating Systems - Reaffirmed: 2014"
2009,ASME,"ASME EA-3 Energy Assessment for Steam Systems"
2014,ASME,"ASME HST-2 Performance Standard for Hand Chain Manually Operated Chain Hoists"
2014,ASME,"ASME PASE Portable Automotive Service Equipment"
2014,ASME,"ASME PTB-8 Procurement Guidelines for Metallic Materials"
2014,ASME,"ASME PTB-9 ASME Pipeline Standards Compendium"
2014,ASME,"ASME Y14.35 Revision of Engineering Drawings and Associated Documents"
2000,ASME,"ASME A112.1.3 Air Gap Fittings for use with Plumbing Fixtures, Appliances, and Appurtenances - Reaffirmed: 2015"
2010,ASME,"ASME A112.14.6 FOG (Fats, Oils, and Greases) Disposal Systems - Reaffirmed: 2015"
2014,ASME,"ASME A112.19.12 Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems"
2008,ASME,"ASME A112.19.3 Stainless Steel Plumbing Fixtures - Reaffirmed: 2013"
1999,ASME,"ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System - Reaffirmed: 2015"
2010,ASME,"ASME A112.6.7 Sanitary Floor Sinks - Reaffirmed: 2015"
2005,ASME,"ASME A112.6.9 Siphonic Roof Drains - Reaffirmed: 2015"
1994,ASME,"ASME A112.19.4M Porcelain Enameled Formed Steel Plumbing Fixtures - Reaffirmed: 2009"
2014,ASME,"ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks"
2015,ASME,"ASME A17.4 Guide for Emergency Personnel"
2014,ASME,"ASME A17.5 Elevator and Escalator Electrical Equipment"
2015,ASME,"ASME A90.1 Safety Standard for Belt Manlifts"
2006,ASME,"ASME B1.20.2M Pipe Threads, 60 deg. General Purpose (Metric) - Reaffirmed: 2011"
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) - Reaffirmed: 2012"
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols - Reaffirmed: 2011"
2014,ASME,"ASME B18.31.3 Threaded Rods (Inch Series"
2006,ASME,"ASME B18.5.2.1M Metric Round Head Short Square Neck Bolts - Reaffirmed: 2011"
2001,ASME,"ASME B29.400 Combination, ""H""-Type Mill Chains, and Sprockets - Reaffirmed: 2013"
2014,ASME,"ASME B30.9 Slings"
2014,ASME,"ASME B31.12 Hydrogen Piping and Pipelines"
2014,ASME,"ASME B31.3 Process Piping"
2005,ASME,"ASME B32.100 Preferred Metric Sizes for Flat, Round, Square, Rectangular and Hexagonal Metal Products - Reaffirmed: 2011"
2014,ASME,"ASME B5.60 Workholding Chucks: Jaw-Type Chucks"
2006,ASME,"ASME B89.4.19 Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems - Reaffirmed: 2015"
1995,ASME,"ASME B94.2 Reamers - Reaffirmed: 2015"
1997,ASME,"ASME B94.33.1 Jig Bushings, Metric - Reaffirmed: 2015"
1996,ASME,"ASME B94.33 Jig Bushings - Reaffirmed: 2015"
1972,ASME,"ASME B94.35 Drill Drivers, Split-Sleeve, Collet Type - Reaffirmed: 2015"
1980,ASME,"ASME B94.7 Hobs - Reaffirmed: 2015"
2014,ASME,"ASME BTH-1 Design of Below-the-Hook Lifting Devices - with Errata"
2015,ASME,"ASME NOG-1 Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder)"
2015,ASME,"ASME NQA-1 Quality Assurance Requirements for Nuclear Facility Applications"
2015,ASME,"ASME PCC-2 Repair of Pressure Equipment and Piping"
2005,ASME,"ASME QRO-1 Standard for the Qualification and Certification of Resource Recovery Facility Operators - Reaffirmed: 2015"
2014,ASME,"ASME Y14.2 Line Conventions and Lettering"
2015,ASME,"ASME ISO/ASME 14414 - 2015: Pump System Energy Assessment"
2015,ASME,"ASME A17.3 - 2015: Safety Code for Existing Elevators and Escalators"
2005,ASME,"ASME B1.13M - 2005: Metric Screw Threads: M Profile - Reaffirmed 2015"
2015,ASME,"ASME B107.17 - 2015: Gages and Mandrels for Wrench Openings"
2015,ASME,"ASME B16.36 - 2015: Orifice Flanges"
2015,ASME,"ASME B18.15 - 2015: Forged Eyebolts"
2015,ASME,"ASME B30.1 - 2015: Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries"
2015,ASME,"ASME B30.26 - 2015: Rigging Hardware"
2015,ASME,"ASME B30.4 - 2015: Portal and Pedestal Cranes"
2015,ASME,"ASME B30.6 - 2015: Derricks"
2015,ASME,"ASME B30.8 - 2015: Floating Cranes and Floating Derricks"
2015,ASME,"ASME B36.10M - 2015: Welded and Seamless Wrought Steel Pipe"
2004,ASME,"ASME B36.19M - 2004: Stainless Steel Pipe - Reaffirmed 2015"
2015,ASME,"ASME B5.50 - 2015: 7/24 Taper Tool to Spindle Connection for Automatic Tool Change"
2005,ASME,"ASME B5.54 - 2005: Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers - Reaffirmed 2015"
2010,ASME,"ASME B89.3.4 - 2010: Axes of Rotation: Methods for Specifying and Testing - Reaffirmed 2015"
1999,ASME,"ASME B94.51M - 1999: Specifications for Band Saw Blades (Metal Cutting) - Reaffirmed 2015"
1999,ASME,"ASME B94.52M - 1999: Specifications for Hack Saw Blades - Reaffirmed 2015"
1999,ASME,"ASME B94.54 - 1999: Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories - Reaffirmed 2015"
2009,ASME,"ASME EA-2G - 2010: Guidance for ASME EA-2, Energy Assessment for Pumping Systems - Reaffirmed 2015"
2010,ASME,"ASME EA-4G - 2010: Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems - Reaffirmed 2015"
2014,ASME,"ASME MFC-1 - 2014: Glossary of Terms Used in the Measurement of Fluid Flow in Pipes"
2015,ASME,"ASME MFC-21.1 - 2015: Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers"
2015,ASME,"ASME OM - 2015: Operation and Maintenance of Nuclear Power Plants"
2015,ASME,"ASME PCC-2 - 2015: Repair of Pressure Equipment and Piping"
2015,ASME,"ASME PTB-10 - 2015: Guide for ASME Section VIII Division 1 Stamp Holders"
2010,ASME,"ASME PTC 12.2 - 2010: Steam Surface Condensers - Reaffirmed 2015"
2000,ASME,"ASME PTC 12.5 - 2000: Single Phase Heat Exchangers - Reaffirmed 2015"
2015,ASME,"ASME PTC 1 - 2015: General Instructions"
2010,ASME,"ASME PTC 19.2 - 2010: Pressure Measurement - Reaffirmed 2015"
2005,ASME,"ASME PTC 29 - 2005: Speed Governing Systems for Hydraulic Turbine Generator Units - Reaffirmed 2015"
2015,ASME,"ASME RT-1 - 2015: Safety Standard for Structural Requirements for Light Rail Vehicles"
2015,ASME,"ASME BPVC - VIII - 1 -2015 BPVC Section VIII, Division 1: Rules for Construction of Pressure Vessels"
2015,ASME,"ASME BPVC - VIII - 2 -2015 BPVC Section VIII, Division 2: Alternative Rules"
2015,ASME,"ASME BPVC - VIII - 3 -2015 BPVC Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels"
2015,ASME,"ASME A112.18.2/CSA B125.2 - 2015: Plumbing Waste Fittings"
2015,ASME,"ASME A112.4.2/CSA B45.16 - 2015: Personal Hygiene Devices for Water Closets"
2016,ASME,"ASME A112.6.3 - 2016: Floor and Trench Drains"
2014,ASME,"ASME A120.1 - 2014: Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance"
2015,ASME,"ASME A13.1 - 2015: Scheme for the Identification of Piping Systems"
2015,ASME,"ASME AG-1 - 2015: Code on Nuclear Air and Gas Treatment"
2015,ASME,"ASME ANDE-1 - 2015: ASME Nondestructive Examination and Quality Control Central Qualification and Certification Program"
2010,ASME,"ASME B107.300 - 2010: Torque Instruments - Reapproved 2016"
2005,ASME,"ASME B107.4 - 2005: Driving and Spindle Ends for Portable Hand, Impact, Air and Electric Tools (Percussion Tools Excluded) - Reapproved 2011"
2015,ASME,"ASME B16.1 - 2015: Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250"
2015,ASME,"ASME B18.2.2 - 2015: Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)"
2015,ASME,"ASME B18.24 - 2015: Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
2008,ASME,"ASME B18.31.1M - 2008: Metric Continuous and Double-End Studs - Reapproved 2016"
1981,ASME,"ASME B18.6.1 - 1981: Wood Screws (Inch Series) - Reapproved 2016"
2015,ASME,"ASME B20.1 - 2015: Safety Standard for Conveyors and Related Equipment"
2002,ASME,"ASME B29.27 - 2002: Single Pitch and Double Pitch Hollow Pin Conveyor Chains and Attachments - Reapproved 2016"
2015,ASME,"ASME B29.28 - 2015: High Strength Chains for Power Transmission and Tension Linkages"
2015,ASME,"ASME B29.300 - 2015: Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets"
2015,ASME,"ASME B30.14 - 2015: Side Boom Tractors"
2015,ASME,"ASME B30.17 - 2015: Cranes and Monorails (With Underhung Trolley or Bridge)"
2016,ASME,"ASME B30.19 - 2016: Cableways"
2016,ASME,"ASME B30.22 - 2016: Articulating Boom Cranes"
2015,ASME,"ASME B30.28 - 2015: Balance Lifting Units"
2016,ASME,"ASME B30.3 - 2016: Tower Cranes"
2016,ASME,"ASME B31.1 - 2016: Power Piping"
2016,ASME,"ASME B31.4 - 2016: Pipeline Transportation Systems for Liquids and Slurries"
2016,ASME,"ASME B31.5 - 2016: Refrigeration Piping and Heat Transfer Components"
2012,ASME,"ASME B31G_ES - 2012: Manual para la determinación de la Resistencia remanente de tuberías corroídas (Spanish)"
2015,ASME,"ASME B73.3 - 2015: Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process"
2016,ASME,"ASME B89.7.1 - 2016: Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards [Technical Report]"
2005,ASME,"ASME BPE - 2005: Bioprocessing Equipment"
2007,ASME,"ASME BPE - 2007: Bioprocessing Equipment"
2015,ASME,"ASME CSD-1 - 2015: Controls and Safety Devices for Automatically Fired Boilers"
2010,ASME,"ASME EA-1G - 2010: Guidance for ASME EA-1, Energy Assessment for Process Heating Systems [ANSI designation: ASME TR EA-1G-2010] - Reapproved 2015"
2010,ASME,"ASME EA-2G - 2010: Guidance for ASME EA-2, Energy Assessment for Pumping Systems [ANSI designation: ASME TR EA-2G-2010] - Reapproved 2015"
2010,ASME,"ASME EA-3G - 2010: Guidance for ASME EA-3, Energy Assessment for Steam Systems [ANSI designation: ASME TR EA-3G-2010] - Reapproved 2015"
2010,ASME,"ASME EA-4G Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010]"
2016,ASME,"ASME FFS-1 - 2016: Fitness-for-Service"
2016,ASME,"ASME HRT-1 - 2016: Rules for Hoisting, Rigging, and Transporting Equipment for Nuclear Facilities"
2016,ASME,"ASME HST-4 - 2016: Performance Standard for Overhead Electric Wire Rope Hoists"
2015,ASME,"ASME HST-6 - 2015: Performance Standard for Air Wire Rope Hoists"
2016,ASME,"ASME NUM-1 - 2016: Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type)"
2015,ASME,"ASME PTC 12.1 - 2015: Closed Feedwater Heaters"
2016,ASME,"ASME PTC 19.3 TW - 2016: Thermowells"
1991,ASME,"ASME PTC 30 - 1991: Air Cooled Heat Exchangers (ACHE) - Reapproved 2016"
1969,ASME,"ASME PTC 4.2 - 1969: Coal Pulverizers - Reapproved 2016"
2015,ASME,"ASME PTC 47.4 - 2015: Power Block of an Integrated Gasification Combined Cycle Power Plant"
2011,ASME,"ASME PTC 6.2 - 2011: Steam Turbines in Combined Cycles - Reapproved 2016"
2000,ASME,"ASME PTC 6A - 2000: Appendix A to PTC 6 The Test Code for Steam Turbines - Reapproved 2016"
2016,ASME,"ASME PVHO-2 - 2016: Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines"
2016,ASME,"ASME QAI-1 - 2016: Qualifications for Authorized Inspection"
2015,ASME,"ASME RTP-1 - 2015: Reinforced Thermoset Plastic Corrosion-Resistant Equipment"
2016,ASME,"ASME A17.1 Safety Code for Elevators and Escalators"
2016,ASME,"ASME A112.19.19 Vitreous China Nonwater Urinals"
2017,ASME,"ASME A112.19.3 Stainless Steel Plumbing Fixtures"
2011,ASME,"ASME A112.19.5 Flush Valves and Spuds for Water Closets, Urinals, and Tanks (with Update No.1)"
2012,ASME,"ASME A112.19.7 Hydromassage Bathtub Systems"
2016,ASME,"ASME A17.8 Standard for Wind Turbine Tower Elevators"
1958,ASME,"ASME B1.11 Microscope Objective Thread"
1984,ASME,"ASME B1.16M Gages and Gaging for Metric M Screw Threads"
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads"
1985,ASME,"ASME B1.22M Gages and Gaging for MJ Metric Screw Threads"
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)"
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols"
1988,ASME,"ASME B1.8 Stub Acme Screw Threads"
2016,ASME,"ASME B107.600 Screwdrivers and Screwdriver Bits"
2011,ASME,"ASME B133.8 Gas Turbine Installation Sound Emissions"
2016,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2016,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges"
2016,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWV"
2016,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500"
2016,ASME,"ASME B16.3 Malleable Iron Threaded Fittings: Classes 150 and 300"
2016,ASME,"ASME B16.4 Gray Iron Threaded Fittings: Classes 125 and 250"
2016,ASME,"ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300"
2017,ASME,"ASME B16.47 Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard"
1972,ASME,"ASME B18.1.1 Small Solid Rivets"
1972,ASME,"ASME B18.1.2 Large Rivets"
1983,ASME,"ASME B18.1.3M Metric Small Solid Rivets"
1961,ASME,"ASME B18.11 Miniature Screws"
2011,ASME,"ASME B18.13.1M Screw and Washer Assemblies: SEMS (Metric Series)"
2017,ASME,"ASME B18.13 Screw and Washer Assemblies--SEMS (Inch Series)"
2004,ASME,"ASME B18.16M Prevailing-Torque-Type Steel Metric Hex Nuts and Hex Flange Nuts"
1979,ASME,"ASME B18.2.4.3M Metric Slotted Hex Nuts"
1999,ASME,"ASME B18.2.8 Clearance Holes for Bolts Screws and Studs"
2010,ASME,"ASME B18.2.9 Straightness Gage and Gaging for Bolts and Screws"
2009,ASME,"ASME B18.21.1 Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)"
1981,ASME,"ASME B18.22M Metric Plain Washers"
1998,ASME,"ASME B18.27 Tapered and Reduced Cross Section Retaining Rings (Inch Series)"
2005,ASME,"ASME B18.29.2M Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series)"
2010,ASME,"ASME B18.29.1 Helical Coil Screw Thread Inserts--Free Running and Screw Locking"
2009,ASME,"ASME B18.31.4M Threaded Rod (Metric Series)"
2011,ASME,"ASME B18.31.5 Bent Bolts (Inch Series)"
2010,ASME,"ASME B18.6.8 Thumb Screws and Wing Screws (Inch Series)"
2010,ASME,"ASME B18.6.9 Wing Nuts (Inch Series)"
1972,ASME,"ASME B27.6 General Purpose Uniform Cross Section Spiral Retaining Rings"
2011,ASME,"ASME B29.1 Precision Power Transmission Roller Chains, Attachments, and Sprockets"
1997,ASME,"ASME B29.15M Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth"
2001,ASME,"ASME B29.200 Welded-Steel-Type Mill Chains,Welded-Steel-Type Drag Chains, Attachments, and Sprocket Teeth"
2001,ASME,"ASME B29.22 Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs"
2002,ASME,"ASME B29.24 Roller Load Chains for Overhead Hoists"
2007,ASME,"ASME B29.2M Inverted Tooth (Silent) Chains and Sprockets"
2010,ASME,"ASME B29.8 Leaf Chains, Clevises, and Sheaves"
2016,ASME,"ASME B30.18 Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)"
2016,ASME,"ASME B30.23 Personnel Lifting Systems"
2016,ASME,"ASME B30.7 Winches"
2016,ASME,"ASME B31.3 Process Piping"
2016,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2016,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines"
2016,ASME,"ASME B31Q Pipeline Personnel Qualification"
2015,ASME,"ASME B31T Standard Toughness Requirements for Piping"
2016,ASME,"ASME B32.100 Preferred Metric Sizes for Flat, Round, Square, Rectangular, and Hexagonal Metal Products"
2016,ASME,"ASME B5.62M Hollow Taper Tooling with Flange-Face Contact"
2001,ASME,"ASME B5.8 Chuck and Chuck Jaws"
2016,ASME,"ASME B73.2 B73.2 - 2016 Specification for Vertical In-Line Centrifugal Pumps for Chemical Process"
2001,ASME,"ASME B89.1.10M Dial Indicators (for Linear Measurement)"
2011,ASME,"ASME B89.1.8 Performance Evaluation of Displacement-Measuring Laser Interferometers"
2016,ASME,"ASME BPE Bioprocessing Equipment"
2017,ASME,"ASME BTH-1 Design of Below-the-Hook Lifting Devices"
2001,ASME,"ASME MFC-18M Measurement of Fluid Flow using Variable Area Meters"
1986,ASME,"ASME MFC-4M Measurement of Gas Flow by Turbine Meters"
2016,ASME,"ASME MFC-7 Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles"
2001,ASME,"ASME MFC-8M Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary & Secondary Devices"
2011,ASME,"ASME PTC-31 High-Purity Water Treatment Systems"
2017,ASME,"ASME PTC-34 Waste Combustors with Energy Recovery"
2017,ASME,"ASME PTC-4.3 Air Heaters"
2015,ASME,"ASME PTC-46 Overall Plant Performance"
2011,ASME,"ASME PTC-51 Gas Turbine Inlet Air-Conditioning Equipment"
2016,ASME,"ASME PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy"
2016,ASME,"ASME STS-1 STS-1 - 2016 Steel Stacks"
2012,ASME,"ASME TDP-2 Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants"
2017,ASME,"ASME BPVC - I -2017 BPVC Section I: Rules for Construction of Power Boilers"
2017,ASME,"ASME BPVC - VIII - 1 -2017 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2017,ASME,"ASME BPVC - VIII - 2 -2017 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2017,ASME,"ASME BPVC - VIII - 3 -2017 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2016,ASME,"ASME A17.1 Handbook on Safety Code for Elevators and Escalators"
2017,ASME,"ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks"
2017,ASME,"ASME A17.3 Safety Code for Existing Elevators and Escalators"
2017,ASME,"ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts"
2012,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)"
2007,ASME,"ASME A112.3.1 Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground"
2017,ASME,"ASME A112.4.4 Plastic Push-Fit Drain, Waste, and Vent (DWV) Fittings"
2017,ASME,"ASME A112.4.14 Manually Operated Valves for Use in Plumbing Systems"
1997,ASME,"ASME A112.6.1M Supports for Off-the-Floor Plumbing Fixtures for Public Use"
2017,ASME,"ASME A112.6.2 Framing-Affixed Supports (Carriers) for Off-the-Floor Plumbing Fixtures"
2003,ASME,"ASME A112.14.1 Backwater Valves"
2018,ASME,"ASME A112.14.3 Hydromechanical Grease Interceptors"
2001,ASME,"ASME A112.14.4 Grease Removal Devices"
2012,ASME,"ASME A112.18.1 Plumbing Supply Fittings"
2002,ASME,"ASME A112.18.3 Performance Requirements for Backflow Devices and Systems in Plumbing Fixture Fittings"
2017,ASME,"ASME A112.18.6 Flexible Water Connectors"
2011,ASME,"ASME A112.18.9 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures"
2017,ASME,"ASME A112.19.5 Flush Valves and Spuds for Water Closets, Urinals, and Tanks"
2012,ASME,"ASME A112.19.15 Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors"
1985,ASME,"ASME A112.21.3M Hydrants for Utility and Maintenance use"
1991,ASME,"ASME A112.36.2M Cleanouts"
2017,ASME,"ASME AG-1 Code on Nuclear Air and Gas Treatment"
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads"
1992,ASME,"ASME B1.3M Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)"
1973,ASME,"ASME B1.9-1973 Buttress Inch Screw Threads 7 deg./45 deg. Form with 0.6 Pitch Basic Height of Thread Engagement"
2012,ASME,"ASME B5.57 Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers"
2017,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard"
2018,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings"
2017,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges"
2017,ASME,"ASME B16.25 Buttwelding Ends"
2017,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings—DWV"
2012,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2)"
2017,ASME,"ASME B16.34 Valves Flanged, Threaded, and Welding End"
2012,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution: Manual Operated,NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum"
2012,ASME,"ASME B16.44 Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up to 5 psi"
2017,ASME,"ASME B16.49 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems"
2018,ASME,"ASME B16.52 Forged Nonferrous Fittings, Socket-Welding and Threaded (Titanium, Titanium Alloys, Aluminum, and Aluminum Alloys)"
2012,ASME,"ASME B18.5 Round Head Bolts"
2007,ASME,"ASME B18.7 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps"
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets"
2012,ASME,"ASME B18.9 Plow Bolts (Inch Series)"
2017,ASME,"ASME B18.16.6 Prevailing Torque Locknuts (Inch Series)"
2017,ASME,"ASME B18.18 Quality Assurance for Fasteners"
1977,ASME,"ASME B27.7 General Purpose Tapered and Reduced Cross Section Retaining Rings (Metric)"
2016,ASME,"ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)"
2018,ASME,"ASME B30.9 Slings"
2017,ASME,"ASME B30.13 Storage/Retrieval (S/R) Machines and Associated Equipment"
2017,ASME,"ASME B30.16 Overhead Underhung and Stationary Hoists"
2018,ASME,"ASME B30.29 Self-Erecting Tower Cranes"
2017,ASME,"ASME B31.9 Building Services Piping"
2017,ASME,"ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines: Supplement to B31 Code for Pressure Piping"
2017,ASME,"ASME B31J Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components"
2017,ASME,"ASME B31P Heat Treatments for Fabrication Processes"
2018,ASME,"ASME B89.1.14 Calipers"
2001,ASME,"ASME B89.1.17 Measurement of Thread Measuring Wires"
2000,ASME,"ASME B89.4.10 Methods for Performance Evaluation of Coordinate Measuring System Software"
1973,ASME,"ASME B89.6.2 Temperature and Humidity Environment for Dimensional Measurement"
2002,ASME,"ASME B89.7.3.3 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements"
2017,ASME,"ASME HST-3 Performance Standard for Lever Hoists"
2004,ASME,"ASME MFC-3M-2004-R2017 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi"
1988,ASME,"ASME MFC-9M-1988-R2011 Measurement of Liquid Flow in Closed Conduits by Weighing Method"
2017,ASME,"ASME NQA-1-2017 Quality Assurance Requirements for Nuclear Facility Applications"
2017,ASME,"ASME OM-2017 Operation and Maintenance of Nuclear Power Plants"
2017,ASME,"ASME PCC-3-2017 Inspection Planning Using Risk-Based Methods"
2017,ASME,"ASME PTB-11-2017 Guide for ASME BPVC Section I Stamp Holders"
2017,ASME,"ASME PTB-12-2017 Guidelines for Addressing Data Gaps and Recordkeeping for ASME B31.4, B31.8 and B31.8S for Pipeline Integrity Management"
2007,ASME,"ASME PTC-19.22 Digital Systems Technique"
2017,ASME,"ASME PTC-47-1 Cryogenic Air Separation Unit of an Integrated Gasification Combined Cycle Power Plant"
2018,ASME,"ASME PTC-53 Mechanical and Thermal Energy Storage Systems"
2017,ASME,"ASME QME-1 Qualification of Active Mechanical Equipment Used in Nuclear Facilities"
2014,ASME,"ASME RA-S-1.2 Severe Accident Progression and Radiological Release (Level 2) PRA Standard for Nuclear Power Plant Applications for Light Water Reactors (LWRs)"
2017,ASME,"ASME RA-S-1.3 Standard for Radiological Accident Offsite Consequence Analysis (Level 3 PRA) to Support Nuclear Installation Applications"
2013,ASME,"ASME RA-S-1.4 - 2013 Probabilistic Risk Assessment Standard for Advanced Non-LWR Nuclear Power Plants"
2016,ASME,"ASME RAM-2 Reliability, Availability, and Maintainability Program Development Process for Existing Power Plants"
2017,ASME,"ASME RTP-1 Reinforced Thermoset Plastic Corrosion-Resistant Equipment"
2017,ASME,"ASME Y14.5.2 Certification of Geometric Dimensioning and Tolerancing Professionals"
2017,ASME,"ASME Y14.46 Product Definition for Additive Manufacturing [Draft Standard for Trial Use]"
2017,ASME,"ASME Y14.100 Engineering Drawing Practices"
2018,ASME,"ASME A112.3.4 Macerating Toilet Systems And Waste-Pumping Systems For Plumbing Fixtures"
2018,ASME,"ASME A112.18.1 - 2018 Plumbing Supply Fittings"
2018,ASME,"ASME A112.19.1 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures"
2018,ASME,"ASME A112.19.2 - 2018 Ceramic Plumbing Fixtures"
2003,ASME,"ASME B1.1 Unified Inch Screw Threads, (UN and UNR Thread Form) - Reaffirmed 2018"
1987,ASME,"ASME B1.12 Class 5 Interference-Fit Thread - Reaffirmed 2018"
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads, Inch - Reaffirmed 2018"
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile - Reaffirmed 2018"
2013,ASME,"ASME B29.21 700 Class Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants - Reaffirmed 2018"
2014,ASME,"ASME B30.5 Mobile and Locomotive Cranes - Reaffirmed 2018"
2013,ASME,"ASME B30.25 Scrap and Material Handlers - Reaffirmed 2018"
2012,ASME,"ASME HST1 Performance Standard for Electric Chain Hoists - Reaffirmed 2018"
2003,ASME,"ASME MFC14M Measurement of Fluid Flow Using Small Bore Precision Orifice Meters - Reaffirmed 2018"
2017,ASME,"ASME PTB11 Guide for ASME BPVC Section I Stamp Holders - Reaffirmed 2018"
2008,ASME,"ASME PTC11 Fans - Reaffirmed 2018"
2018,ASME,"ASME PTC19.6 Electrical Measurements In Power Circuits"
2018,ASME,"ASME STP PT 087 Yield Strength Values up to Maximum Temperature Design"
2018,ASME,"ASME STP TS 084 2018 Orifice Flow Coefficient Equation Comparison"
2018,ASME,"ASME B16.15-2018 Cast Copper Alloy Threaded Fittings: Classes 125 and 250"
2018,ASME,"ASME B16.22 - 2018 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2018,ASME,"ASME B16.26 - 2018 Cast Copper Alloy Fittings for Flared Copper Tubes"
2018,ASME,"ASME B16.50 - 2018 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings"
2018,ASME,"ASME B16.51 - 2018 Copper and Copper Alloy Press-Connect Pressure Fittings"
2018,ASME,"ASME B20.1 - 2018 Safety Standard for Conveyors and Related Equipment"
2018,ASME,"ASME B36.10M - 2018 Welded and Seamless Wrought Steel Pipe"
2018,ASME,"ASME B36.19M - 2018 Stainless Steel Pipe"
2018,ASME,"ASME CSD-1 - 2018 Controls and Safety Devices for Automatically Fired Boilers"
2018,ASME,"ASME QEI-1 - 2018 Standard for the Qualification of Elevator Inspectors"
2013,ASME,"ASME Y14.34 - 2013 Reapproved 2018 Associated Lists"
2012,ASME,"ASME B16.9 - 2012 (R2018) Factory-Made Wrought Buttwelding Fittings"
2016,ASME,"ASME B31.8 - 2016 (R2018) Gas Transmission and Distribution Piping Systems"
2016,ASME,"ASME B31.8S - 2016 (R2018) Managing System Integrity of Gas Pipelines"
2018,ASME,"ASME SRB-1 - 2018 Design, Installation, Maintenance, and Application of Ball Slewing Ring Bearings"
2008,ASME,"ASME Y14.36 - 2008 (R2018) Surface Texture Symbols"
2018,ASME,"ASME AED-1 - 2018: Aerospace and Advanced Engineering Drawings"
1995,ASME,"ASME B1.15 - 1995: Unified Inch Screw Threads, (UNJ Thread Form) - with Errata"
2013,ASME,"ASME B1.20.1 - 2013: Pipe Threads, General Purpose, Inch - Reaffirmed 2018"
1976,ASME,"ASME B1.20.3 - 1976: Dryseal Pipe Threads,Inch - Reaffirmed 2018"
2018,ASME,"ASME B107.410 - 2018: Struck Tools"
2018,ASME,"ASME B107.56 - 2018: Body Repair Tools"
1997,ASME,"ASME B29.12M - 1997: Steel Bushed Rollerless Chains, Attachments and Sprocket Teeth - Reaffirmed 2018"
1998,ASME,"ASME B29.17M - 1998: Hinge Type Flat Top Conveyor Chains and Sprocket Teeth - Reaffirmed 2018"
2018,ASME,"ASME B30.24 - 2018: Container Cranes"
2016,ASME,"ASME B31.8 - 2016: Sistemas de Tuberías de Distribución y Transporte de Gas [Spanish Translation of ASME B31.8-2016]"
2018,ASME,"ASME B31Q - 2018: Pipeline Personnel Qualification"
2018,ASME,"ASME B31T - 2018: Standard Toughness Requirements for Piping"
2018,ASME,"ASME FE.1 - 2018: Rules for Construction of Fusion Energy Devices [Draft Standard for Trial Use]"
2010,ASME,"ASME MFC-21.2 - 2010: Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters - Reaffirmed 2018"
2011,ASME,"ASME MFC-26 - 2011: Measurement of Gas Flow by Bellmouth Inlet Flowmeters - Reaffirmed 2018"
2011,ASME,"ASME MFC-5.1 - 2011: Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters - Reaffirmed 2018"
2017,ASME,"ASME N511 - 2017: In-Service Testing of Nuclear Air-Treatment, Heating, Ventilating, and Air-Conditioning Systems"
2017,ASME,"ASME PCC-2 - 2018: Repair of Pressure Equipment and Piping"
2018,ASME,"ASME QAI-1 - 2018: Qualifications for Authorized Inspection"
2018,ASME,"ASME Y14.5 - 2018: Dimensioning and Tolerancing"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2019"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components-2019"
2019,ASME,"ASME BPVC - I -2019 BPVC Section I, Rules for Construction of Power Boilers"
2019,ASME,"ASME BPVC - II - A -2019 BPVC Section II, Materials, Part A, Ferrous Materials Specifications - Voulme 1: Beginning to SA-450"
2019,ASME,"ASME BPVC - II - A -2019 BPVC Section II, Materials, Part A, Ferrous Materials Specifications - Voulme 2: SA-451 to End"
2019,ASME,"ASME BPVC - II - B -2019 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2019,ASME,"ASME BPVC - II - C -2019 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2019,ASME,"ASME BPVC - II - D - C -2019 - BPVC Section II, Materials, Part D, Properties (Customary)"
2019,ASME,"ASME BPVC - II - D - M -2019 - BPVC Section II, Materials, Part D, Properties (Metric)"
2019,ASME,"ASME BPVC - III - 1 - NB -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2019,ASME,"ASME BPVC - III - 1 - NC -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2019,ASME,"ASME BPVC - III - 1 - ND -2019  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2019,ASME,"ASME BPVC - III - 1 - NE -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2019,ASME,"ASME BPVC - III - 1 - NF -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2019,ASME,"ASME BPVC - III - 1 - NG -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2019,ASME,"ASME BPVC - III - 2 -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2019,ASME,"ASME BPVC - III - 3 -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2019,ASME,"ASME BPVC - III - 5 -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2019,ASME,"ASME BPVC - III - 1 - A -2019  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2019,ASME,"ASME BPVC - III - 1 - 2 - NCA -2019  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2019,ASME,"ASME BPVC - IV -2019 BPVC Section IV, Rules for Construction of Heating Boilers"
2019,ASME,"ASME BPVC - IX -2019 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2019,ASME,"ASME BPVC - V -2019 BPVC Section V, Nondestructive Examination"
2019,ASME,"ASME BPVC - VI -2019 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2019,ASME,"ASME BPVC - VII -2019 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2019,ASME,"ASME BPVC - VIII - 1 -2019 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2019,ASME,"ASME BPVC - VIII - 2 -2019 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2019,ASME,"ASME BPVC - VIII - 3 -2019 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2019,ASME,"ASME BPVC - X -2019 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2019,ASME,"ASME BPVC - XI - 1 -2019 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components, Division 1, Rules for Inspection and Testing of Components of Light-Water-Cooled Plants"
2019,ASME,"ASME BPVC - XI - 2 -2019 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components, Division 2, Requirements for Reliability and Integrity Management (RIM) Programs for Nuclear Power Plants"
2019,ASME,"ASME BPVC - XII -2019 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2014,ASME,"ASME A112.19.12-2014 (R2019): Wall Mounted, Pedestal Mounted, Adjustable, Elevated, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier and Drain Waste Systems"
2013,ASME,"ASME A112.19.14-2013 (R2018): Six Liter Water Closets Equipped with a Dual Flushing Device"
2010,ASME,"ASME A112.19.17-2010 (R2018): Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems"
2009,ASME,"ASME A112.4.1-2009 (R2019): Water Heater Relief Valve Drain Tubes"
2019,ASME,"ASME A112.6.3 - 2019: Floor and Trench Drains"
2019,ASME,"ASME A17.5/CSA B44.1 - 2019: Elevator and Escalator Electrical Equipment"
2019,ASME,"ASME B1.25 - 2019: Measurement Uncertainty Factors in the Calibration of Screw Thread Gages"
2019,ASME,"ASME B107.4-2019: Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded)"
2019,ASME,"ASME B18.2.6-2019: Fasteners for Use in Structural Applications"
2001,ASME,"ASME B29.400-2001 (R2018): Combination ""H"" Type Mill Chains and Sprockets"
2009,ASME,"ASME B89.1.7-2009 (R2019): Performance Standard for Steel Measuring Tapes"
2004,ASME,"ASME B89.4.22-2004 (R2019): Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines (CMM)"
2019,ASME,"ASME BPE-2019: Bioprocessing Equipment"
2014,ASME,"ASME MFC-16-2014 (R2019): Measurement of Fluid Flow in Closed Conduits With Electromagnetic Flowmeters"
2018,ASME,"ASME NM.1-2018: Thermoplastic Piping Systems"
2018,ASME,"ASME NM.2-2018: Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems"
2018,ASME,"ASME NM.3.1-2018: Nonmetallic Materials, Part 1 - Thermoplastic Material Specifications"
2018,ASME,"ASME NM.3.2-2018: Nonmetallic Materials, Part 2 - Reinforced Thermoset Plastic Material Specifications"
2018,ASME,"ASME NM.3.3-2018: Nonmetallic Materials, Part 3 - Properties"
2013,ASME,"ASME POM 101-2013 (R2019): Performance-Related Outage Inspections"
2004,ASME,"ASME PTC 19.5-2004 (R2013): Application, Part II of Fluid Meters: Interim Supplement on Instruments and Apparatus"
2002,ASME,"ANSI/ASME QME-1-2002: Qualification Of Active Mechanical Equipment For Nuclear Power Plants"
2012,ASME,"ASME Y14.3-2012 (R2018): Orthographic and Pictorial Views - Engineering Drawing and Related Documentation Practices"
2019,ASME,"ASME Y14.47-2019: Model Organization Practices: Engineering Product Definition and Related Documentation Practices"
2009,ASME,"ASME Y14.5-2009: Dimensiones y Tolerancias"
2018,ASME,"ASME PTC 13 - 2018: Wire-To-Air Performance Test Code for Blower Systems"
2017,ASME,"ASME A112.19.3/CSA B45.4-2017 - Stainless Steel Plumbing Fixtures (with 5/17 & 8/17 Errata)"
1991,ASME,"ASME B1.20.5-1991 - Gaging for Dryseal Pipe Threads-Inch - Reapproved 2019"
2019,ASME,"ASME B16.12-2019 - Cast Iron Threaded Drainage Fittings"
1997,ASME,"ASME B29.10M-1997 - Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth - Reapproved 2019"
2014,ASME,"ASME B30.21-2014 Lever Hoists: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings - Reapproved 2019"
2018,ASME,"ASME B31.3-2018 - Process Piping"
2019,ASME,"ASME B31.4-2019 - Pipeline Transportation Systems for Liquids and Slurries"
2003,ASME,"ASME B5.52-2003 - Power Presses: General Purpose, Single-Point Gap Type - Reapproved 2019"
1994,ASME,"ASME B5.56M-1994 - Specification and Performance Standard, Power Shears - Reapproved 2019"
2014,ASME,"ASME B5.60-2014 - Workholding Chucks: Jaw Type Chucks - Reapproved 2019"
2003,ASME,"ASME B5.61-2003 - Power Presses: General Purpose, Single-Action, Straight Side Type - Reapproved 2019"
1998,ASME,"ASME B89.1.5-1998 - Measurement of Plain External Diameters for Use as Master Disk or Cylindrical Plug Gages - Reapproved 2019"
2010,ASME,"ASME B89.3.4-2010 - Axes of Rotation: Methods for Specifying and Testing - Reapproved 2019"
2014,ASME,"ASME B89.7.2-2014 - Dimensional Measurement Planning - Reapproved 2019"
2001,ASME,"ASME B89.7.3.1-2001 - Guideline for Decision Rules: Considering Measurement Uncertainty in Determining Confirm to Specification - Reapproved 2019"
1997,ASME,"ASME B94.19-1997 - Milling Cutters and End Mills - Reapproved 2019"
1968,ASME,"ASME B94.21-1968 - Gear Shaper Cutters - Reapproved 2019"
1985,ASME,"ASME B94.55M-1985 - Tool Life Testing with Single-Point Turning Tools - Reapproved 2019"
2018,ASME,"ASME HST-2-2018 - Performance Standard for Hand Chain Manually Operated Chain Hoists"
2019,ASME,"ASME NML-1-2019 - Rules for the Movement of Loads Using Overhead Handling Equipment in Nuclear Facilities"
2019,ASME,"ASME - NTB - 2 -2019  Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Metallic Components"
2019,ASME,"ASME PASE-2019 - Safety Standard for Portable Automotive Service Equipment"
2019,ASME,"ASME PCC-1-2019 - Guidelines for Pressure Boundary Bolted Flange Joint Assembly"
2014,ASME,"ASME POM 102-2014 - Operating Walkdowns of Power Plants - Reapproved 2019"
2019,ASME,"ASME PTB-5-2019 - ASME Boiler and Pressure Vessel Code, Section VIII, Division 3, Example Problem Manual"
1997,ASME,"ASME PTC 12.3-1997 - Performance Test Code on Deaerators - Reapproved 2019"
1992,ASME,"ASME PTC 12.4-1992 - Moisture Separator Reheaters - Reapproved 2019"
2018,ASME,"ASME PTC 19.1-2018 - Test Uncertainty"
2018,ASME,"ASME PTC 25-2018 - Pressure Relief Devices"
2002,ASME,"ASME PTC 50-2002 - Fuel Cell Power Systems Performance - Reapproved 2019"
1988,ASME,"ASME PTC 6S-1988 - Procedures for Routine Performance Tests of Steam Turbines - Reapproved 2019"
2009,ASME,"ASME PTC 70-2009 - Ramp Rates - Reapproved 2019"
2019,ASME,"ASME Y14.37-2019 - Product Definition for Composite Parts"
2019,ASME,"ASME Y14.41-2019 - Digital Product Definition Data Practices"
2019,ASME,"ASME A17.1-2019/CSA B44:19 Safety Code for Elevators and Escalators"
2019,ASME,"ASME AG-1-2019 Code on Nuclear Air and Gas Treatment"
2019,ASME,"ASME B30.27-2019 Material Placement Systems"
2019,ASME,"ASME B31.12-2019 Hydrogen Piping and Pipelines"
2019,ASME,"ASME NQA-1-2019 Quality Assurance Requirements for Nuclear Facility Applications"
2019,ASME,"ASME P30.1-2019 Planning for Load Handling Activities"
2019,ASME,"ASME PVHO-1-2019 Safety Standard for Pressure Vessels for Human Occupancy"
2019,ASME,"ASME PVHO-2-2019 Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines"
2019,ASME,"ASME RTP-1-2019 Reinforced Thermoset Plastic Corrosion-Resistant Equipment"
2005,ASME,"ASME A17.1S-2005 Supplement to Safety Code for Elevators and Escalators"
2020,ASME,"ASME A112.18.2/CSA B125.2 - 2020: Plumbing Waste Fittings"
2020,ASME,"ASME A112.19.7/CSA B45.10 - 2020: Hydromassage Bathtub Systems"
2015,ASME,"ASME A112.4.2-2015/CSA B45.16-15 (R2020): Water Closet Personal Hygiene Devices"
2019,ASME,"ASME B1.1-2019: Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)"
2005,ASME,"ASME B1.13M-2005 (R2020): Metric Screw Threads: M Profile"
2020,ASME,"ASME B107.100-2020: Flat Wrenches"
2019,ASME,"ASME B107.110-2019: Socket Wrenches, Handles, and Attachment"
2020,ASME,"ASME B107.17-2020: Gages and Mandrels for Wrench Opening"
2020,ASME,"ASME B107.500-2020: Pliers and Shears"
2019,ASME,"ASME B16.39-2019: Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300"
2020,ASME,"ASME B18.12-2020: Glossary of Terms for Mechanical Fasteners"
2001,ASME,"ASME B18.2.3.9M-2001 (R2020): Metric Heavy Hex Flange Screws"
2015,ASME,"ASME B30.26-2015 (R2020): Rigging Hardware"
2015,ASME,"ASME B30.28-2015 (R2020): Balance Lifting Units"
2019,ASME,"ASME B30.3-2019: Tower Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings"
2020,ASME,"ASME B30.6-2020: Derricks: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings"
2020,ASME,"ASME B31.1-2020: Power Piping"
2019,ASME,"ASME B31.12-2019: Hydrogen Piping and Pipelines, Includes Errata (2020)"
2019,ASME,"ASME B31.5-2019: Refrigeration Piping and Heat Transfer Components"
2019,ASME,"ASME B46.1-2019: Surface Texture (Surface Roughness, Waviness, and Lay)"
2005,ASME,"ASME B5.54-2005 (R2020): Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers"
2020,ASME,"ASME B89.4.21.1-2020: Environmental Effects on Coordinate Measuring Machine Measurements"
2019,ASME,"ASME B89.7.6-2019: Guidelines for the Evaluation of Uncertainty of Test Values Associated with the Verification of Dimensional Measuring Instruments to Their Performance Specifications"
1995,ASME,"ASME B94.2-1995 (R2020): Reamers"
1972,ASME,"ASME B94.35-1972 (R2020): Drill Drivers, Split-Sleeve, Collet Type"
1975,ASME,"ASME B94.49-1975 (R2020): Spade Drill Blades and Spade Drill Holders"
1999,ASME,"ASME B94.54-1999 (R2020): Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories"
2010,ASME,"ASME EA-4-2010 (R2020): Energy Assessment for Compressed Air Systems"
2020,ASME,"ASME HST-5-2020: Performance Standard for Air Chain Hoists"
2015,ASME,"ASME MFC-21.1-2015 (R2020): Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers"
2020,ASME,"ASME NQA.TR-2020: Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry"
2020,ASME,"ASME - NTB - 3 -2020  Gap Analysis for Addressing Adequacy or Optimization of ASME Section III, Division 5 Rules for Metallic Components"
2020,ASME,"ASME OM-2020: Operation and Maintenance of Nuclear Power Plants"
2010,ASME,"ASME PTC 12.2-2010 (R2020): Steam Surface Condensers"
2010,ASME,"ASME PTC 19.2-2010 (R2020): Pressure Measurement"
2005,ASME,"ASME PTC-29-2005 (R2020): Speed Governing Systems for Hydraulic Turbine Generator Units"
2007,ASME,"ASME PTC 30.1-2007 (R2020): Air-Cooled Steam Condensers"
2005,ASME,"ASME PTC 39-2005 (R2020): Steam Traps"
2015,ASME,"ASME PTC 47.4-2015 (R2020): Power Block of an Integrated Gasification Combined Cycle Power Plant"
2020,ASME,"ASME RAM-1-2020: Reliability, Availability, and Maintainability of Equipment and Systems in Power Plants"
2020,ASME,"ASME TES-1-2020: Safety Standard for Thermal Energy Storage Systems: Molten Salt"
2020,ASME,"ASME TR A17.1-8.4-2020: Guide for Elevator Seismic Design"
2014,ASME,"ASME Y14.2-2014 (R2020): Line Conventions and Lettering"
2019,ASME,"ASME Y14.38-2019: Abbreviations and Acronyms for Use in Product Definition and Related Documents: Engineering Product Definition and Related Documentation Practices"
2019,ASME,"ASME Y14.5.1-2019: Mathematical Definition of Dimensioning and Tolerancing Principles"
2018,ASME,"ASME B31.1 - 2018: Power Piping"
2020,ASME,"ASME A112.18.8 - 2020 Sanitary Waste Valves for Plumbing Drainage Systems"
2020,ASME,"ASME A13.1 - 2020 Scheme for the Identification of Piping Systems"
2020,ASME,"ASME B16.1 - 2020 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250"
2020,ASME,"ASME B16.48 - 2020 Line Blanks"
2020,ASME,"ASME B18.24 - 2020 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
2020,ASME,"ASME B18.8.2 - 2020 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)"
2020,ASME,"ASME B30.4 - 2020 Portal and Pedestal Cranes"
2020,ASME,"ASME B31.9 - 2020 Building Services Piping"
1967,ASME,"ASME B4.1 - 1967(R2020) Preferred Limits and Fits for Cylindrical Parts"
1978,ASME,"ASME B4.2 - 1978(R2020) Preferred Metric Limits and Fits"
2020,ASME,"ASME B73.1 - 2020 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process"
2020,ASME,"ASME B89.4.23 - 2020 X-Ray Computed Tomography (CT) Performance Evaluation"
2020,ASME,"ASME CA-1 - 2020 Conformity Assessment Requirements"
2020,ASME,"ASME HST-6 - 2020 Performance Standard for Air Wire Rope Hoists"
2020,ASME,"ASME NM.1 - 2020 Thermoplastic Piping Systems"
2020,ASME,"ASME NOG-1 - 2020 Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder)"
2019,ASME,"ASME PTC 47.2-2019, Gasification Block of an Integrated Gasification Combined Cycle Power Plant"
2020,ASME,"ASME RT-1 - 2020 Safety Standard for Structural Requirements for Light Rail Vehicles and Streetcars"
2020,ASME,"ASME Y14.1 - 2020 Decimal Inch Drawing Sheet Size and Format"
2020,ASME,"ASME Y14.24 - 2020 Types and Applications of Engineering Drawings"
2011,ASME,"ASME Y14.43 - 2011(R2020) Dimensioning and Tolerancing Principles for Gages and Fixtures"
2001,ASME,"ASME BPVC - I -2001 BPVC Section I, Rules for Construction of Power Boilers"
2004,ASME,"ASME BPVC - I -2004 BPVC Section I, Rules for Construction of Power Boilers"
2007,ASME,"ASME BPVC - I -2007 BPVC Section I, Rules for Construction of Power Boilers"
2010,ASME,"ASME BPVC - I -2010 BPVC Section I, Rules for Construction of Power Boilers"
2013,ASME,"ASME BPVC - I -2013 BPVC Section I, Rules for Construction of Power Boilers"
2015,ASME,"ASME BPVC - I -2015 BPVC Section I, Rules for Construction of Power Boilers"
2001,ASME,"ASME BPVC - II - A -2001 BPVC Section II, Materials, Part A, (Beginning to SA-450)"
2007,ASME,"ASME BPVC - II - A -2007 BPVC Section II, Materials, Part A, (Beginning to SA-450)"
2010,ASME,"ASME BPVC - II - A -2010 BPVC Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2017,ASME,"ASME BPVC - II - A -2017 BPVC Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2004,ASME,"ASME BPVC - II - A -2004 BPVC Section II, Materials, Part A, (Beginning to SA-450)"
2013,ASME,"ASME BPVC - II - A -2013 BPVC Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2015,ASME,"ASME BPVC - II - A -2015 BPVC Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2007,ASME,"ASME BPVC - II - A -2007 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2010,ASME,"ASME BPVC - II - A -2010 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2013,ASME,"ASME BPVC - II - A -2013 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2015,ASME,"ASME BPVC - II - A -2015 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2017,ASME,"ASME BPVC - II - A -2017 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2001,ASME,"ASME BPVC - II - B -2001 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2004,ASME,"ASME BPVC - II - B -2004 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2007,ASME,"ASME BPVC - II - B -2007 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2010,ASME,"ASME BPVC - II - B -2010 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2013,ASME,"ASME BPVC - II - B -2013 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2015,ASME,"ASME BPVC - II - B -2015 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2017,ASME,"ASME BPVC - II - B -2017 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2001,ASME,"ASME BPVC - II - C -2001 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2004,ASME,"ASME BPVC - II - C -2004 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2007,ASME,"ASME BPVC - II - C -2007 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2010,ASME,"ASME BPVC - II - C -2010 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2013,ASME,"ASME BPVC - II - C -2013 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2015,ASME,"ASME BPVC - II - C -2015 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2017,ASME,"ASME BPVC - II - C -2017 BPVC Section II, Materials, Part C, Specifications for Welding Rods Electrodes and Filler Metals"
2001,ASME,"ASME BPVC - II - D -2001 BPVC Section II, Materials, Part D, Properties"
2004,ASME,"ASME BPVC - II - D - C -2004 BPVC Section II, Materials, Part D, Properties (Customary)"
2007,ASME,"ASME BPVC - II - D - C -2007 BPVC Section II, Materials, Part D, Properties (Customary)"
2010,ASME,"ASME BPVC - II - D - C -2010 BPVC Section II, Materials, Part D, Properties (Customary)"
2013,ASME,"ASME BPVC - II - D - C -2013 BPVC Section II, Materials, Part D, Properties (Customary)"
2015,ASME,"ASME BPVC - II - D - C -2015 BPVC Section II, Materials, Part D, Properties (Customary)"
2017,ASME,"ASME BPVC - II - D - C -2017 BPVC Section II, Materials, Part D, Properties (Customary)"
2004,ASME,"ASME BPVC - II - D - M -2004 BPVC Section II, Materials, Part D, Properties (Metric)"
2007,ASME,"ASME BPVC - II - D - M -2007 BPVC Section II, Materials, Part D, Properties (Metric)"
2010,ASME,"ASME BPVC - II - D - M -2010 BPVC Section II, Materials, Part D, Properties (Metric)"
2013,ASME,"ASME BPVC - II - D - M -2013 BPVC Section II, Materials, Part D, Properties (Metric)"
2015,ASME,"ASME BPVC - II - D - M -2015 BPVC Section II, Materials, Part D, Properties (Metric)"
2017,ASME,"ASME BPVC - II - D - M -2017 BPVC Section II, Materials, Part D, Properties (Metric)"
2007,ASME,"ASME BPVC - III - 1 - A -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2010,ASME,"ASME BPVC - III - 1 - A -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2013,ASME,"ASME BPVC - III - 1 - A -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2017,ASME,"ASME BPVC - III - 1 - NB -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2017,ASME,"ASME BPVC - III - 1 - NC -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2017,ASME,"ASME BPVC - III - 1 - ND -2017  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2017,ASME,"ASME BPVC - III - 1 - NE -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2017,ASME,"ASME BPVC - III - 1 - NF -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2017,ASME,"ASME BPVC - III - 1 - NG -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2001,ASME,"ASME BPVC - III - 2 -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2004,ASME,"ASME BPVC - III - 2 -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2007,ASME,"ASME BPVC - III - 2 -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2010,ASME,"ASME BPVC - III - 2 -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2013,ASME,"ASME BPVC - III - 2 -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2015,ASME,"ASME BPVC - III - 2 -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2017,ASME,"ASME BPVC - III - 2 -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2001,ASME,"ASME BPVC - III - 3 -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2004,ASME,"ASME BPVC - III - 3 -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2007,ASME,"ASME BPVC - III - 3 -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2010,ASME,"ASME BPVC - III - 3 -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2013,ASME,"ASME BPVC - III - 3 -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2015,ASME,"ASME BPVC - III - 3 -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2017,ASME,"ASME BPVC - III - 3 -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste"
2013,ASME,"ASME BPVC - III - 5 -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2015,ASME,"ASME BPVC - III - 5 -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2017,ASME,"ASME BPVC - III - 5 -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2001,ASME,"ASME BPVC - III - 1 - A -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2015,ASME,"ASME BPVC - III - 1 - A -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2017,ASME,"ASME BPVC - III - 1 - A -2017  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2004,ASME,"ASME BPVC - III - 1 - A -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Appendices"
2001,ASME,"ASME BPVC - III - 1 - NB -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2004,ASME,"ASME BPVC - III - 1 - NB -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2007,ASME,"ASME BPVC - III - 1 - NB -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2010,ASME,"ASME BPVC - III - 1 - NB -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2013,ASME,"ASME BPVC - III - 1 - NB -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2015,ASME,"ASME BPVC - III - 1 - NB -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2001,ASME,"ASME BPVC - III - 1 - NC -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2004,ASME,"ASME BPVC - III - 1 - NC -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2007,ASME,"ASME BPVC - III - 1 - NC -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2010,ASME,"ASME BPVC - III - 1 - NC -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2013,ASME,"ASME BPVC - III - 1 - NC -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2015,ASME,"ASME BPVC - III - 1 - NC -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NC, Class 2 Component"
2001,ASME,"ASME BPVC - III - 1 - 2 - NCA -2001  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2004,ASME,"ASME BPVC - III - 1 - 2 - NCA -2004  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2007,ASME,"ASME BPVC - III - 1 - 2 - NCA -2007  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2010,ASME,"ASME BPVC - III - 1 - 2 - NCA -2010  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2013,ASME,"ASME BPVC - III - 1 - 2 - NCA -2013  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2015,ASME,"ASME BPVC - III - 1 - 2 - NCA -2015  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2017,ASME,"ASME BPVC - III - 1 - 2 - NCA -2017  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2001,ASME,"ASME BPVC - III - 1 - ND -2001  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2004,ASME,"ASME BPVC - III - 1 - ND -2004  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2007,ASME,"ASME BPVC - III - 1 - ND -2007  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2010,ASME,"ASME BPVC - III - 1 - ND -2010  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2013,ASME,"ASME BPVC - III - 1 - ND -2013  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2015,ASME,"ASME BPVC - III - 1 - ND -2015  BPVC Section III, Rules for Constructions of Nuclear Facility Components, Division 1, Subsection ND, Class 3 Components"
2001,ASME,"ASME BPVC - III - 1 - NE -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2004,ASME,"ASME BPVC - III - 1 - NE -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2007,ASME,"ASME BPVC - III - 1 - NE -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2010,ASME,"ASME BPVC - III - 1 - NE -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2013,ASME,"ASME BPVC - III - 1 - NE -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2015,ASME,"ASME BPVC - III - 1 - NE -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2001,ASME,"ASME BPVC - III - 1 - NF -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2004,ASME,"ASME BPVC - III - 1 - NF -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2007,ASME,"ASME BPVC - III - 1 - NF -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2010,ASME,"ASME BPVC - III - 1 - NF -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2013,ASME,"ASME BPVC - III - 1 - NF -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2015,ASME,"ASME BPVC - III - 1 - NF -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2001,ASME,"ASME BPVC - III - 1 - NG -2001  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2004,ASME,"ASME BPVC - III - 1 - NG -2004  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2007,ASME,"ASME BPVC - III - 1 - NG -2007  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2010,ASME,"ASME BPVC - III - 1 - NG -2010  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2013,ASME,"ASME BPVC - III - 1 - NG -2013  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2015,ASME,"ASME BPVC - III - 1 - NG -2015  BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2001,ASME,"ASME BPVC - IV -2001 BPVC Section IV, Rules for Construction of Heating Boilers"
2004,ASME,"ASME BPVC - IV -2004 BPVC Section IV, Rules for Construction of Heating Boilers"
2007,ASME,"ASME BPVC - IV -2007 BPVC Section IV, Rules for Construction of Heating Boilers"
2010,ASME,"ASME BPVC - IV -2010 BPVC Section IV, Rules for Construction of Heating Boilers"
2013,ASME,"ASME BPVC - IV -2013 BPVC Section IV, Rules for Construction of Heating Boilers"
2015,ASME,"ASME BPVC - IV -2015 BPVC Section IV, Rules for Construction of Heating Boilers"
2017,ASME,"ASME BPVC - IV -2017 BPVC Section IV, Rules for Construction of Heating Boilers"
2001,ASME,"ASME BPVC - IX -2001 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2004,ASME,"ASME BPVC - IX -2004 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2007,ASME,"ASME BPVC - IX -2007 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2010,ASME,"ASME BPVC - IX -2010 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2015,ASME,"ASME BPVC - IX -2015 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2017,ASME,"ASME BPVC - IX -2017 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2001,ASME,"ASME BPVC - V -2001 BPVC Section V, Nondestructive Examination"
2004,ASME,"ASME BPVC - V -2004 BPVC Section V, Nondestructive Examination"
2007,ASME,"ASME BPVC - V -2007 BPVC Section V, Nondestructive Examination"
2010,ASME,"ASME BPVC - V -2010 BPVC Section V, Nondestructive Examination"
2013,ASME,"ASME BPVC - V -2013 BPVC Section V, Nondestructive Examination"
2015,ASME,"ASME BPVC - V -2015 BPVC Section V, Nondestructive Examination"
2017,ASME,"ASME BPVC - V -2017 BPVC Section V, Nondestructive Examination"
2001,ASME,"ASME BPVC - VI -2001 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2004,ASME,"ASME BPVC - VI -2004 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2007,ASME,"ASME BPVC - VI -2007 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2010,ASME,"ASME BPVC - VI -2010 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2013,ASME,"ASME BPVC - VI -2013 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2015,ASME,"ASME BPVC - VI -2015 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2017,ASME,"ASME BPVC - VI -2017 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2001,ASME,"ASME BPVC - VII -2001 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2004,ASME,"ASME BPVC - VII -2004 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2007,ASME,"ASME BPVC - VII -2007 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2010,ASME,"ASME BPVC - VII -2010 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2013,ASME,"ASME BPVC - VII -2013 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2015,ASME,"ASME BPVC - VII -2015 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2017,ASME,"ASME BPVC - VII -2017 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2001,ASME,"ASME BPVC - VIII - 1 -2001 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2004,ASME,"ASME BPVC - VIII - 1 -2004 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2007,ASME,"ASME BPVC - VIII - 1 -2007 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2010,ASME,"ASME BPVC - VIII - 1 -2010 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1"
2013,ASME,"ASME BPVC - VIII - 1 -2013 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1 - SPANISH"
2001,ASME,"ASME BPVC - VIII - 2 -2001 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2004,ASME,"ASME BPVC - VIII - 2 -2004 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2007,ASME,"ASME BPVC - VIII - 2 -2007 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2010,ASME,"ASME BPVC - VIII - 2 -2010 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules"
2001,ASME,"ASME BPVC - VIII - 3 -2001 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2004,ASME,"ASME BPVC - VIII - 3 -2004 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2007,ASME,"ASME BPVC - VIII - 3 -2007 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2010,ASME,"ASME BPVC - VIII - 3 -2010 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels"
2001,ASME,"ASME BPVC - X -2001 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2004,ASME,"ASME BPVC - X -2004 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2007,ASME,"ASME BPVC - X -2007 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2010,ASME,"ASME BPVC - X -2010 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2013,ASME,"ASME BPVC - X -2013 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2015,ASME,"ASME BPVC - X -2015 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2017,ASME,"ASME BPVC - X -2017 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2001,ASME,"ASME BPVC - XI -2001 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2004,ASME,"ASME BPVC - XI -2004 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2007,ASME,"ASME BPVC - XI -2007 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2010,ASME,"ASME BPVC - XI -2010 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2013,ASME,"ASME BPVC - XI -2013 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2015,ASME,"ASME BPVC - XI -2015 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2017,ASME,"ASME BPVC - XI -2017 BPVC Section XI-Rules for Inservice Inspection of Nuclear Power Plant Components"
2004,ASME,"ASME BPVC - XII -2004 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2007,ASME,"ASME BPVC - XII -2007 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2010,ASME,"ASME BPVC - XII -2010 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2013,ASME,"ASME BPVC - XII -2013 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2015,ASME,"ASME BPVC - XII -2015 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2017,ASME,"ASME BPVC - XII -2017 BPVC Section XII-Rules for Construction and Continued Service of Transport Tanks"
2020,ASME,"ASME A17.2 - 2020: Guide for Inspection of Elevators, Escalators, and Moving Walks"
2020,ASME,"ASME B16.36 - 2020: Orifice Flanges"
2020,ASME,"ASME B18.6.2 - 2020: Square Head Set Screws and Slotted Headless Set Screws (Inch Series)"
2020,ASME,"ASME NM.2 - 2020: Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems"
2020,ASME,"ASME NM.3.1 - 2020: Nonmetallic Materials, Part 1--Thermoplastic Material Specifications"
2020,ASME,"ASME NM.3.2 - 2020: Nonmetallic Materials, Part 2--Reinforced Thermoset Plastic Material Specifications"
2020,ASME,"ASME NM.3.3 - 2020: Nonmetallic Materials, Part 3--Properties"
2020,ASME,"ASME STB-1 - 2020: Guideline on Big Data/Digital Transformation Workflows and Applications for the Oil and Gas Industry"
2020,ASME,"ASME A17.3-2020 Safety Code for Existing Elevators and Escalators"
2020,ASME,"ASME A18.1-2020 Safety Standard for Platform Lifts and Stairway Chairlifts"
2020,ASME,"ASME ANDE-1-2020 ASME Nondestructive Examination and Quality Control Central Qualification and Certification Program"
2020,ASME,"ASME B16.34-2020 Valves Flanged, Threaded and Welding End"
2020,ASME,"ASME B16.47-2020 Large Diameter Steel Flanges: NPS 26 through NPS 60, Metric/Inch Standard"
2020,ASME,"ASME B16.5-2020 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24, Metric/Inch Standard"
2015,ASME,"ASME B29.28-2015 (R2020) High Strength Chains for Power Transmission and Tension Linkages"
2015,ASME,"ASME B29.300-2015 (R2020) Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets"
2020,ASME,"ASME B30.1-2020 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries"
2021,ASME,"ASME B31Q-2021 Pipeline Personnel Qualification"
1989,ASME,"ASME MFC-3M - 1989 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venturi"
1975,ASME,"ASME N278.1 - 1975 Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard"
2021,ASME,"ASME RA-S-1.4-2021 Probabilistic Risk Assessment Standard for Advanced Non-Light Water Reactor Nuclear Power Plants"
2014,ASME,"ASME Y14.31 - 2014 (R2019) Undimensioned Drawings"
2020,ASME,"ASME B30.8-2020 Floating Cranes and Floating Derricks"
2020,ASME,"ASME B30.17-2020 Cranes and Monorails (With Underhung Trolley or Bridge)"
2001,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2001"
2010,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2010"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2013"
2004,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2004"
2007,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2007"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section I: Power Boilers 2019"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section IV: Heating Boilers 2019"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2015"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2019"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2015"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2019"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2015"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2019"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2019"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2019"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2019"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2015"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2017"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2019"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2015"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2015"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2015"
2003,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 10-2003"
2006,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 10-2006"
2009,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 10-2009"
2012,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 10-2012"
2004,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 11-2004"
2006,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 11-2006"
2009,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 11-2009"
2012,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 11-2012"
2001,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2001"
2004,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2004"
2007,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2007"
2010,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2010"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2013"
2004,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 12-2004"
2001,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2001"
2005,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2005"
2007,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2007"
2010,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2010"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2013"
2001,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2001"
2005,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2005"
2007,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2007"
2010,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2010"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 03-2013"
2002,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2002"
2005,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2005"
2008,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2008"
2011,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2011"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2013"
2002,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2002"
2005,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2005"
2008,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2008"
2011,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2011"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2013"
2003,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2003"
2005,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2005"
2008,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2008"
2011,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2011"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 06-2013"
2003,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2003"
2006,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2006"
2008,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2008"
2011,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2011"
2013,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 07-2013"
2003,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 08 & 09-2003"
2006,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 08-2006"
2009,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 08-2009"
2012,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 08-2012"
2006,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 09-2006"
2009,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 09-2009"
2012,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 09-2012"
2019,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section VII: Pressure Vessels 2019"
2001,ASME,"ASME BPVC CODE CASES: Nuclear Components-2001"
2010,ASME,"ASME BPVC CODE CASES: Nuclear Components-2010"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components-2013"
2004,ASME,"ASME BPVC CODE CASES: Nuclear Components-2004"
2007,ASME,"ASME BPVC CODE CASES: Nuclear Components-2007"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components--Section III: Construction of Nuclear Facility Components 2019"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2015"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2019"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2015"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2019"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2015"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2019"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2019"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2019"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2019"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2015"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2017"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2019"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2015"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2015"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2015"
2003,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 10-2003"
2006,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 10-2006"
2009,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 10-2009"
2012,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 10-2012"
2004,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 11-2004"
2006,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 11-2006"
2009,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 11-2009"
2012,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 11-2012"
2001,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2001"
2004,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2004"
2007,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2007"
2010,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2010"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2013"
2004,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 12-2004"
2001,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2001"
2005,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2005"
2007,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2007"
2010,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2010"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2013"
2001,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2001"
2005,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2005"
2007,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2007"
2010,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2010"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 03-2013"
2002,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2002"
2005,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2005"
2008,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2008"
2011,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2011"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2013"
2002,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2002"
2005,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2005"
2008,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2008"
2011,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2011"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2013"
2003,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2003"
2005,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2005"
2008,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2008"
2011,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2011"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2013"
2003,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2003"
2006,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2006"
2008,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2008"
2011,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2011"
2013,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 07-2013"
2003,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 08-&-9-2003"
2006,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 08-2006"
2009,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 08-2009"
2011,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 08-2011"
2006,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 09-2006"
2012,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 09-2012"
2019,ASME,"ASME BPVC CODE CASES: Nuclear Components--Section XI: Rules for Inservice Inspection of Nuclear Power Plant Components 2019"
2010,ASME,"ASME BPVC - I -2010 BPVC Section I, Rules for Construction of Power Boilers - Spanish"
2001,ASME,"ASME BPVC - VIII - 1 -2001 INTERPRETATIONS Volume 48"
2001,ASME,"ASME BPVC - VIII - 1 -2001 INTERPRETATIONS Volume 49"
2002,ASME,"ASME BPVC - VIII - 1 -2002 INTERPRETATIONS Volume 50"
2002,ASME,"ASME BPVC - VIII - 1 -2002 INTERPRETATIONS Volume 51"
2003,ASME,"ASME BPVC - VIII - 1 -2003 INTERPRETATIONS Volume 52"
2003,ASME,"ASME BPVC - VIII - 1 -2003 INTERPRETATIONS Volume 53"
2004,ASME,"ASME BPVC - VIII - 1 -2004 INTERPRETATIONS Volume 54"
2005,ASME,"ASME BPVC - VIII - 1 -2005 INTERPRETATIONS Volume 55"
2006,ASME,"ASME BPVC - VIII - 1 -2006 INTERPRETATIONS Volume 56"
2007,ASME,"ASME BPVC - VIII - 1 -2007 INTERPRETATIONS Volume 57"
2008,ASME,"ASME BPVC - VIII - 1 -2008 INTERPRETATIONS Volume 58"
2009,ASME,"ASME BPVC - VIII - 1 -2009 INTERPRETATIONS Volume 59"
2010,ASME,"ASME BPVC - VIII - 1 -2010 INTERPRETATIONS Volume 60"
2009,ASME,"Companion Guide to the ASME Boiler & Pressure Vessel Code: Criteria and Commentary on Select Aspects of the Boiler & Pressure Vessel and Piping Codes, Third Edition VOLUME 1"
2009,ASME,"Companion Guide to the ASME Boiler & Pressure Vessel Code: Criteria and Commentary on Select Aspects of the Boiler & Pressure Vessel and Piping Codes, Third Edition VOLUME 2"
2009,ASME,"Companion Guide to the ASME Boiler & Pressure Vessel Code: Criteria and Commentary on Select Aspects of the Boiler & Pressure Vessel and Piping Codes, Third Edition VOLUME 3"
2006,ASME,"ASME B1.7 - 2006(R2016) Screw Threads: Nomenclature, Definitions, and Letter Symbols"
1988,ASME,"ASME B1.8 - 1988(R2016) Stub Acme Screw Threads"
2013,ASME,"ASME B29.26 - 2013(R2021) Fatigue Testing Power Transmission Roller Chain"
2002,ASME,"ASME B29.27 - 2002(R2021) Single Pitch and Double Pitch Hollow Pin Conveyor Chains and Attachments"
2011,ASME,"ASME B30.12 - 2011(R2021) Handling Loads Suspended from Rotorcraft"
2015,ASME,"ASME B30.14 - 2015(R2021) Side Boom Tractors"
2020,ASME,"ASME B31.3 - 2020 Process Piping"
2020,ASME,"ASME B31.8 - 2020 Gas Transmission and Distribution Piping Systems"
2020,ASME,"ASME B31.8S - 2020 Managing System Integrity of Gas Pipelines"
2020,ASME,"ASME BTH-1 - 2020 Design of Below-the-Hook Lifting Devices"
2016,ASME,"ASME HRT-1 - 2016(R2021) Rules for Hoisting, Rigging, and Transporting Equipment for Nuclear Facilities"
2016,ASME,"ASME MFC-7 - 2016(R2021) Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles"
2021,ASME,"ASME PTB-13 - 2021 Criteria for Pressure Retaining Metallic Components Using Additive Manufacturing"
2021,ASME,"ASME QPS - 2021 Quality Program for Suppliers: General Industry"
2021,ASME,"ASME BPVC - III - 1 - NB -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2021,ASME,"ASME BPVC - III - 1 - NE -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2021,ASME,"ASME BPVC - III - 1 - NF -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2021,ASME,"ASME BPVC - III - 1 - NG -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2021,ASME,"ASME BPVC - III - 3 -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 3, Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material"
2021,ASME,"ASME BPVC - III - NCA -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2021,ASME,"ASME BPVC - IX -2021 BPVC Section IX, Welding, Brazing, and Fusing Qualifications"
2021,ASME,"ASME BPVC - VI -2021 BPVC Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2021,ASME,"ASME BPVC - VII -2021 BPVC Section VII, Recommended Guidelines for the Care of Power Boilers"
2021,ASME,"ASME BPVC - VIII - 3 -2021 BPVC Section VIII, Rules for Construction of Pressure Vessels, Division 3, Alternative Rules for Construction of High Pressure Vessels"
2021,ASME,"ASME BPVC - XI - 1 -2021 BPVC Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components, Division 1, Rules for Inspection and Testing of Components of Light-Water-Cooled Plants"
2021,ASME,"ASME BPVC - XII -2021 BPVC Section XII, Rules for Construction and Continued Service of Transport Tanks"
2021,ASME,"ASME BPVC - II - A -2021 BPVC Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2021,ASME,"ASME BPVC - II - A -2021 BPVC Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2021,ASME,"ASME BPVC - II - B -2021 BPVC Section II, Materials, Part B, Nonferrous Material Specifications"
2021,ASME,"ASME BPVC - III - 2 -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2021,ASME,"ASME BPVC - III - 5 -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2021,ASME,"ASME BPVC - IV -2021 BPVC Section IV, Rules for Construction of Heating Boilers"
2021,ASME,"ASME BPVC - V -2021 BPVC Section V, Nondestructive Examination"
2021,ASME,"ASME BPVC - VIII - 2 -2021 BPVC Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
2021,ASME,"ASME BPVC - X -2021 BPVC Section X, Fiber-Reinforced Plastic Pressure Vessels"
2021,ASME,"ASME BPVC - XIII -2021 BPVC Section XIII,  Rules for Overpressure Protection"
2015,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2015"
2017,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2017"
2015,ASME,"ASME BPVC CODE CASES: Nuclear Components-2015"
2017,ASME,"ASME BPVC CODE CASES: Nuclear Components-2017"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2021"
2021,ASME,"ASME BPVC - I -2021 BPVC Section I, Rules for Construction of Power Boilers"
2021,ASME,"ASME BPVC - II - C -2021 BPVC Section II, Materials, Part C, Specifications for Welding Rods, Electrodes, and Filler Metals"
2021,ASME,"ASME BPVC - II - D - C -2021 BPVC Section II, Materials, Part D, Properties (Customary)"
2021,ASME,"ASME BPVC - II - D - M -2021 BPVC Section II, Materials, Part D, Properties (Metric)"
2021,ASME,"ASME BPVC - III - 1 - NCD -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NCD, Class 2 and 3 Components"
2021,ASME,"ASME BPVC - III - A -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2021,ASME,"ASME BPVC - VIII - 1 -2021 BPVC Section VIII, Rules for Construction of Pressure Vessels, Division 1"
2021,ASME,"ASME BPVC - XI - 2 -2021 BPVC Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components, Division 2, Requirements for Reliability and Integrity Management (RIM) Programs for Nuclear Power Plants"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components-2021"
2016,ASME,"ASME A112.19.19 - 2016(R2021) Vitreous China Nonwater Urinals"
2013,ASME,"ASME A17.1 / CSA B44 - 2013 Safety Code for Elevators and Escalators with February 2021 ERRATA"
2016,ASME,"ASME A17.1 / CSA B44 - 2016 Safety Code for Elevators and Escalators with February 2021 ERRATA"
2019,ASME,"ASME A17.1/CSA B44 Handbook - 2019 Handbook on Safety Code for Elevators and Escalators"
2021,ASME,"ASME B107.300 - 2021 Hand Torque Tools and Torque Testers"
2016,ASME,"ASME B107.600 - 2016(R2021) Screwdrivers and Screwdriver Bits"
2021,ASME,"ASME B20.1 - 2021 Safety Standard for Conveyors and Related Equipment"
2021,ASME,"ASME B31T - 2021 Standard Toughness Requirements for Piping"
2011,ASME,"ASME B89.1.8 - 2011(R2021) Performance Evaluation of Displacement-Measuring Laser Interferometers"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section I: Power Boilers 2021"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section IV: Heating Boilers 2021"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels--Section VIII: Pressure Vessels 2021"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components--Section III: Construction of Nuclear Facility Components 2021"
2021,ASME,"ASME BPVC CODE CASES: Code Cases: Nuclear Components--Section XI: Rules for Inservice Inspection of Nuclear Power Plant Components 2021"
2021,ASME,"ASME NTB-4 - 2021 Background Information for Addressing Adequacy of Optimization of ASME BPVC Section III, Division 5 Rules for Nonmetallic Core Components"
1991,ASME,"ASME PTC 30 - 1991(R2021) Air Cooled Heat Exchangers"
2020,ASME,"ASME PTC 47 - 2020(R2016) Integrated Gasification Combined Cycle Power Generation Plants"
1972,ASME,"ASME B18.1.1 - 1972(R2021) Small Solid Rivets"
1972,ASME,"ASME B18.1.2 - 1972(R2021) Large Rivets"
1983,ASME,"ASME B18.1.3M - 1983(R2021) Metric Small Solid Rivets"
2015,ASME,"ASME B18.15 - 2015(R2021) Forged Eyebolts"
2012,ASME,"ASME B18.2.6M - 2012(R2021) Metric Fasteners for Use in Structural Applications"
2009,ASME,"ASME B18.31.4M - 2009(R2021) Threaded Rod (Metric Series)"
2011,ASME,"ASME B18.31.5 - 2011(R2021) Bent Bolts (Inch Series)"
2021,ASME,"ASME B30.18 - 2021 Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)"
2016,ASME,"ASME B30.19 - 2016(R2021) Cableways"
2021,ASME,"ASME B30.5 - 2021 Mobile and Locomotive Cranes"
2021,ASME,"ASME B30.7 - 2021 Winches"
2001,ASME,"ASME B89.1.10M - 2001(R2021) Standards Dial Indicators (for Linear Measurement)"
2021,ASME,"ASME B89.4.10 - 2021 Methods for Performance Evaluation of Coordinate Measuring System Software"
2007,ASME,"ASME B89.7.3.2 - 2007(R2021) Guidelines for the Evaluation of Dimensional Measurement Uncertainty (Technical Report)"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 01-2021"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 02-2021"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 01-2021"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 02-2021"
2021,ASME,"ASME CSD-1 - 2021 Controls and Safety Devices for Automatically Fired Boilers"
1988,ASME,"ASME MFC-9M - 1988(R2021) Measurement of Liquid Flow in Closed Conduits by Weighing Method"
2020,ASME,"ASME PTC 18 - 2020 (R2016) Hydraulic Turbines and Pump-Turbines"
2020,ASME,"ASME PTC 52-2020 Concentrating Solar Power Plants"
2021,ASME,"ASME RTP-1-2021 Reinforced Thermoset Plastic Corrosion-Resistant Equipment"
2010,ASME,"ASME A112.14.6 - 2010(R2019) FOG (Fats, Oils, and Greases) Disposal Systems"
2017,ASME,"ASME A112.18.6/CSA B125.6 - 2017(R2021) Flexible Water Connectors"
2004,ASME,"ASME B18.16M - 2004(R2021)Dimensional Requirements for Prevailing-Torque-TypeSteel Metric Hex Nuts and Hex Flange Nuts"
2017,ASME,"ASME B18.18 - 2017(R2021) Quality Assurance for Fasteners"
2012,ASME,"ASME B18.2.1 - 2012(R2021) Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)"
2010,ASME,"ASME B18.2.9 - 2010(R2021) Straightness Gage and Gaging for Bolts and Screws"
2008,ASME,"ASME B18.31.1M - 2008(R2021) Metric Continuous and Double-End Studs"
2014,ASME,"ASME B18.31.2 - 2014(R2019) Continuous Thread Stud, Double-End Stud, and Flange Bolting Stud (Stud Bolt) (Inch Series)"
2014,ASME,"ASME B18.8.1 - 2014(R2019) Clevis Pins and Cotter Pins (Inch Series)"
1997,ASME,"ASME B29.15M - 1997(R2021) Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth"
2001,ASME,"ASME B29.200 - 2001(R2021) Welded-Steel-Type Mill Chains,Welded-Steel-Type Drag Chains, Attachments, and Sprocket Teeth"
2001,ASME,"ASME B29.22 - 2001(R2021) Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs"
2002,ASME,"ASME B29.24 - 2002(R2021) Roller Load Chains for Overhead Hoists"
2021,ASME,"ASME B30.9 - 2021 Slings"
2021,ASME,"ASME HST-4 - 2021 Performance Standard for Overhead Electric Wire Rope Hoists"
2021,ASME,"ASME RT-2 - 2021 Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles"
2021,ASME,"ASME Y14.45 - 2021 Measurement Data Reporting"
2021,ASME,"ASME PTB-4 - 2021 ASME Section VIII-Division 1 Example Problem Manual"
2021,ASME,"ASME A17.8/CSA B44.8 - 2021 Standard for Wind Turbine Tower Elevators"
2021,ASME,"ASME B16.21 - 2021 Nonmetallic Flat Gaskets for Pipe Flanges"
2021,ASME,"ASME B16.3 - 2021 Malleable Iron Threaded Fittings: Classes 150 and 300"
2021,ASME,"ASME B16.4 - 2021 Gray Iron Threaded Fittings: Classes 125 and 250"
2021,ASME,"ASME B16.42 - 2021 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300"
2011,ASME,"ASME B18.13.1M - 2011 (R2022) Screw and Washer Assemblies: SEMS (Metric Series)"
2017,ASME,"ASME B18.13 - 2017 (R2022) Screw and Washer Assemblies--SEMS (Inch Series)"
2011,ASME,"ASME B29.1 - 2011 (R2022) Precision Power Transmission Roller Chains, Attachments, and Sprockets"
2016,ASME,"ASME B5.62M - 2016 (R2022) Hollow Taper Tooling with Flange-Face Contact"
2021,ASME,"ASME FFS-1 - 2021 Fitness-for-Service"
2021,ASME,"ASME B16.18 - 2021 Cast Copper Alloy Solder Joint Pressure Fittings"
2021,ASME,"ASME B16.50 - 2021 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings"
2022,ASME,"ASME B18.2.2 - 2022 Nuts for General Applications: Machine Screw Nuts; and Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)"
1999,ASME,"ASME B18.2.3.1M - 1999(R2011) Metric Hex Cap Screws"
2007,ASME,"ASME B1.3 - 2007(R2022) - Screw Thread Gaging Systems for Acceptability: Inch & Metric Screw Threads (UN,UNR,UNJ,M,MJ)"
2021,ASME,"ASME B16.22 - 2021 - Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2021,ASME,"ASME B16.23 - 2021 - Cast Copper Alloy Solder Joint Drainage Fittings: DWV"
2021,ASME,"ASME B16.51 - 2021 - Copper and Copper Alloy Press-Connect Pressure Fittings"
2022,ASME,"ASME B30.13 - 2022 - Storage/Retrieval (S/R) Machines and Associated Equipment"
2022,ASME,"ASME B30.16 - 2022 - Overhead Underhung and Stationary Hoists"
2007,ASME,"ASME B47.1 - 2007(R2022) - Gage Blanks with Errata"
2021,ASME,"ASME B89.4.19 - 2021 - Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 04-2021"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 04-2021"
2022,ASME,"ASME NTB-5 - 2022 - Guidance for Determination of Risk-Informed Safety Classification for Light Water Reactor Nuclear Facility Pressure Retaining Components"
2017,ASME,"ASME PTC 34 - 2017(R2022) - Waste Combustors with Energy Recovery"
2022,ASME,"ASME Y14.8 - 2022 - Castings, Forgings, and Molded Parts"
2021,ASME,"ASME A120.1-2021 - Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance"
2021,ASME,"ASME B16.24-2021 - Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500"
2021,ASME,"ASME B30.32-2021 - Unmanned Aircraft Systems (UAS) Used in Inspection, Testing, Maintenance, and Load-Handling Operations"
2022,ASME,"ASME B36.10-2022 - Welded and Seamless Wrought Steel Pipe"
2022,ASME,"ASME B36.19-2022 - Welded and Seamless Wrought Stainless Steel Pipe"
2022,ASME,"ASME BPE-2022 - Bioprocessing Equipment"
2022,ASME,"ASME PTC 1-2022 - General Instructions Performance"
2021,ASME,"ASME PTC 47.3-2021 - Syngas-Conditioning Block of an Integrated Gasification Combined Cycle Power Plant"
2022,ASME,"ASME ANS RA-S-1.1-2022 Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications"
2022,ASME,"ASME Y14.46-2022 - Product Definition for Additive Manufacturing"
2012,ASME,"ASME A112.1.2-2012 (R2022) Air Gaps in Plumbing Systemsfor Plumbing Fixtures and Water-Connected Receptors)"
2003,ASME,"ASME A112.14.1-2003 (R2022) Backwater Valves"
2002,ASME,"ASME A112.18.3-2002 (R2022) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings"
2011,ASME,"ASME A112.18.9-2011 (R2022) Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures"
2012,ASME,"ASME A112.19.15-2012 (R2022) Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors"
1985,ASME,"ASME A112.21.3M-1985 (R2022) Hydrants for Utility and Maintenance use"
2007,ASME,"ASME A112.3.1-2007 (R2022) Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground"
2017,ASME,"ASME A112.6.2-2017 (R2022) Framing-Affixed Supports (Carriers) for Off-the-Floor Plumbing Fixtures"
2017,ASME,"ASME B18.16.6-2017 (R2022) Prevailing Torque Locknuts (Inch Series)"
2007,ASME,"ASME B29.2M-2007 (R2022) Inverted Tooth (Silent) Chains and Sprockets"
2010,ASME,"ASME B29.8-2010 (R2022) Leaf Chains, Clevises, and Sheaves"
2022,ASME,"ASME B30.23-2022 Personnel Lifting Systems"
2021,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels- Supplement 05-2021"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 05-2021"
2022,ASME,"ASME HST-3-2022 Performance Standard for Lever Hoists"
2022,ASME,"ASME MBE-1-2022 Model-Based Enterprise: Framework"
2022,ASME,"ASME N511-2022 In-Service Testing of Nuclear Air-Treatment, Heating, Ventilating, and Air-Conditioning Systems"
2022,ASME,"ASME NQA-1-2022 Quality Assurance Requirements for Nuclear Facility Applications"
2021,ASME,"ASME STS-1-2021 Steel Stacks"
2022,ASME,"ASME A112.14.3/CSA B481.1 - 2022 Hydromechanical Grease Interceptors"
2022,ASME,"ASME A112.14.4-2022/CSA B481.5 - 2022 Grease Removal Devices"
2022,ASME,"ASME A112.36.2/CSA B79.2 - 2022 Cleanouts"
2022,ASME,"ASME B30.2 - 2022 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist"
2022,ASME,"ASME PCC-2 - 2022 Repair of Pressure Equipment and Piping"
2022,ASME,"ASME PTB-3 - 2022 ASME Section VIII-Division 2 Example Problem Manual"
2022,ASME,"ASME A112.19.3-2022/CSA B45.4:22 Stainless steel plumbing fixtures"
2022,ASME,"ASME A112.19.5-2022/CSA B45.15:22 Flush valves and spuds for water closets, urinals, and tanks"
2022,ASME,"ASME A112.4.14-2022/CSA B125.14:22 Manually or Automatically Operated Valves for Use in Plumbing Systems"
2022,ASME,"ASME A112.6.3-2022/CSA B79.3:22 Floor drains"
2022,ASME,"ASME A112.6.4-2022/CSA B79.4:22 Roof, deck, and balcony drains"
2022,ASME,"ASME A112.6.7-2022/CSA B79.7:22 Sanitary floor sinks"
2022,ASME,"ASME A112.6.8-2022/CSA B79.8:22 Trench drains"
2022,ASME,"ASME A112.6.9-2022/CSA B79.9:22 Siphonic roof drains"
2011,ASME,"ASME B133.8-2011 Gas Turbine Installation Sound Emissions"
2021,ASME,"ASME B16.11-2021 Forged Fittings, Socket-Welding and Threaded"
2022,ASME,"ASME B31.1-2022 Power Piping"
2012,ASME,"ASME B5.57-2012 Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers"
2002,ASME,"ASME B89.7.3.3-2002 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements"
2021,ASME,"ASME BPVC CODE CASES: Nuclear Components- Supplement 06-2023"
2004,ASME,"ASME MFC-3M-2004 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi"
2022,ASME,"ASME PCC-1-2022 Guidelines for Pressure Boundary Bolted Flange Joint Assembly"
2022,ASME,"ASME PTB-2-2022 Guide to Life Cycle Management of Pressure Equipment Integrity"
2017,ASME,"ASME PTC 40-2017 Flue Gas Desulfurization Units"
2007,ASME,"ASME A17.7-2007/CSA B44.7-07 (R2022) Performance-Based Safety Code for Elevators and Escalators"
2007,ASME,"ASME B18.7-2007 (R2022) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps"
2002,ASME,"ASME B89.1.6-2002 (R2022) Measurement of Plain Internal Diameters for use as a Master Rings or Ring Guages"
2022,ASME,"ASME B31.3 - 2022 - Process Piping"
2022,ASME,"ASME B31.4 - 2022 - Pipeline Transportation Systems for Liquids and Slurries"
2022,ASME,"ASME B31.5 - 2022 - Refrigeration Piping and Heat Transfer Components"
2022,ASME,"ASME B31.8 - 2022 - Gas Transmission and Distribution Piping Systems"
2022,ASME,"ASME B31.8S - 2022 - Managing System Integrity of Gas Pipelines"
2013,ASME,"ASME B89.1.13 - 2013(R2022) - Micrometers"
2022,ASME,"ASME OM - 2022 - Operation and Maintenance of Nuclear Power Plants"
2022,ASME,"ASME PCC-3 - 2022 - Inspection Planning Using Risk-Based Methods"
1973,ASME,"ASME PTC 17 - 1973(R2022) - Reciprocating Internal-Combustion Engines"
2017,ASME,"ASME PTC 47.1 - 2017(R2022) - Cryogenic Air Separation Unit of an Integrated Gasification Combined Cycle Power Plant"
2022,ASME,"ASME VVUQ 1 - 2022 - Verification, Validation, and Uncertainty Quantification Terminology in Computational Modeling and Simulation"
2022,ASME,"ASME A17.6 - 2022: Standard for Elevator Suspension, Compensation, and Governor Systems"
2008,ASME,"ASME B18.21.3 - 2008(R2023): Double Coil Helical Spring Lock Washers for Wood Structures"
2012,ASME,"ASME B18.5 - 2012(R2023): Round Head Bolts (Inch Series)"
2022,ASME,"ASME B31.3 - 2022 with Errata: Process Piping"
2018,ASME,"ASME B89.1.14 - 2018(R2023): Calipers"
2022,ASME,"ASME CA-1 - 2022: Conformity Assessment Requirements"
2007,ASME,"ASME PTC 19.22 - 2007(R2023): Data Acquisition Systems"
2023,ASME,"ASME PTC 22 - 2023: Gas Turbines"
2023,ASME,"ASME QME-1 - 2023: Qualification of Active Mechanical Equipment Used in Nuclear Facilities"
2018,ASME,"ASME SRB-1 - 2018(R2023): Design, Installation, Maintenance, and Application of Ball Slewing Ring Bearings"
2023,ASME,"ASME BPVC.III.1.NB-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components"
2023,ASME,"ASME BPVC.III.1.NCD-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NCD, Class 2 and 3 Components"
2023,ASME,"ASME BPVC.III.1.NE-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NE, Class MC Components"
2023,ASME,"ASME BPVC.III.1.NF-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports"
2023,ASME,"ASME BPVC.III.1.NG-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NG, Core Support Structures"
2023,ASME,"ASME BPVC.III.2-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 2, Code for Concrete Containments"
2023,ASME,"ASME BPVC.III.3-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 3, Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material"
2023,ASME,"ASME BPVC.III.A-2023 Section III, Rules for Construction of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2023,ASME,"ASME BPVC.III.NCA-2023 Section III, Rules for Construction of Nuclear Facility Components, Subsection NCA, General Requirements for Division 1 and Division 2"
2023,ASME,"ASME BPVC.IV-2023 Section IV, Rules for Construction of Heating Boilers"
2023,ASME,"ASME BPVC.VI-2023 Section VI, Recommended Rules for the Care and Operation of Heating Boilers"
2023,ASME,"ASME BPVC.VII-2023 Section VII, Recommended Guidelines for the Care of Power Boilers"
2023,ASME,"ASME BPVC.VIII.3-2023 Section VIII, Rules for Construction of Pressure Vessels, Division 3, Alternative Rules for Construction of High Pressure Vessels"
2023,ASME,"ASME BPVC.X-2023 Section X, Fiber-Reinforced Plastic Pressure Vessels"
2023,ASME,"ASME BPVC.XII-2023 Section XII, Rules for Construction and Continued Service of Transport Tanks"
2023,ASME,"ASME BPVC.XIII-2023 Section XIII, Rules for Overpressure Protection"
2023,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels-2023"
2023,ASME,"ASME BPVC CODE CASES: Nuclear Components-2023"
2023,ASME,"ASME BPVC.I-2023 Section I, Rules for Construction of Power Boilers"
2023,ASME,"ASME BPVC.II.A-2023 Section II, Materials, Part A, Ferrous Material Specifications (Beginning to SA-450)"
2023,ASME,"ASME BPVC.II.A-2023 Section II, Materials, Part A, Ferrous Material Specifications (SA-451 to End)"
2023,ASME,"ASME BPVC.II.B-2023 Section II, Materials, Part B, Nonferrous Material Specifications"
2023,ASME,"ASME BPVC.II.C-2023 Section II, Materials, Part C, Specifications for Welding Rods, Electrodes, and Filler Metals"
2023,ASME,"ASME BPVC.II.D.C-2023 Section II, Materials, Part D, Properties (Customary)"
2023,ASME,"ASME BPVC.II.D.M-2023 Section II, Materials, Part D, Properties (Metric)"
2023,ASME,"ASME BPVC.III.5-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors"
2023,ASME,"ASME BPVC.IX-2023 Section IX, Welding, Brazing, and Fusing Qualifications"
2023,ASME,"ASME BPVC.V-2023 Section V, Nondestructive Examination"
2023,ASME,"ASME BPVC.VIII.1-2023 Section VIII, Rules for Construction of Pressure Vessels, Division 1"
2023,ASME,"ASME BPVC.VIII.2-2023 Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
2023,ASME,"ASME BPVC.XI.1-2023 Section XI, Rules for Inservice Inspection of Nuclear Reactor Facility Components, Division 1, Rules for Inspection and Testing of Components of Light-Water-Cooled Plants"
2023,ASME,"ASME BPVC.XI.2-2023 Section XI, Rules for Inservice Inspection of Nuclear Reactor Facility Components, Division 2, Requirements for Reliability and Integrity Management (RIM) Programs for Nuclear Reactor Facilities"
2022,ASME,"ASME A112.14.4-2022/CSA B481.5:22 Grease Removal Devices"
2022,ASME,"ASME A112.14.3-2022/CSA B481.1:22 Hydromechanical Grease Interceptors"
2010,ASME,"ASME A112.19.17-2010 Manufactured Safety Vacuum Release SystemsSVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems"
2023,ASME,"ASME B107.100-2023 Flat Wrenches"
2022,ASME,"ASME B16.25-2022 Buttwelding Ends"
2022,ASME,"ASME B16.29-2022 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
1997,ASME,"ASME B29.12M-1997 Steel Bushed Rollerless Chains, Attachments and Sprocket Teeth"
1998,ASME,"ASME B29.17M-1998 Hinge Type Flat Top Conveyor Chains and Sprocket Teeth"
2013,ASME,"ASME B29.21-2013 700 Class Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants"
2001,ASME,"ASME B29.400-2001 Combination, ""H""-Type Mill Chains, and Sprockets"
2023,ASME,"ASME B30.22-2023 Articulating Boom Cranes"
2023,ASME,"ASME B30.24-2018 Container Cranes"
2022,ASME,"ASME B31.3-2022 Process Piping"
2022,ASME,"ASME B36.19-2022 Welded and Seamless Wrought Stainless Steel Pipe"
2022,ASME,"ASME B73.3-2022 Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process"
2013,ASME,"ASME B89.3.7-2013 Granite Surface Plates"
2019,ASME,"ASME BPE-2019 (POR) Equipamento de Bioprocessamento"
2022,ASME,"ASME BPE-2022 Bioprocessing Equipment"
2022,ASME,"ASME NM.1-2022 Thermoplastic Piping Systems"
2022,ASME,"ASME NM.2-2022 Fiber-Reinforced Thermosetting-Resin Piping Systems"
2022,ASME,"ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications"
2022,ASME,"ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications"
2022,ASME,"ASME NM.3.3-2022 Nonmetallic Materials, Part 3 - Properties"
2023,ASME,"ASME PDS-1.1-2023 Default Standards for Understanding Engineering Documentation with Incomplete Reference to Applicable Dimensioning, Tolerancing, Surface Texture, and Metrology Standards"
2018,ASME,"ASME PTC 19.6-2018 Electrical Power Measurements"
2003,ASME,"ASME PTC 23-2003 Atmospheric Water Cooling Equipment"
2022,ASME,"ASME PTC 53-2022 Mechanical and Thermal Energy Storage Systems"
2023,ASME,"ASME Y14.47-2023 Model Organization Practices"
2022,ASME,"ASME A17.1/CSA B44 - 2022 Safety Code for Elevators and Escalators"
2022,ASME,"ASME QAI-1-2023 Qualifications for Authorized Inspection"
2023,ASME,"ASME A13.1-2023 Scheme for the Identification of Piping Systems"
2023,ASME,"ASME AED-1-2023 Aerospace and Advanced Engineering Product Definition"
1976,ASME,"ASME B1.20.3-1976-R2023 Dryseal Pipe Threads,Inch"
2018,ASME,"ASME B107.410-2018-R2023 Struck Tools"
2018,ASME,"ASME B107.56-2018-R2023 Body Repair Tools"
2023,ASME,"ASME B18.24-2023 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
2018,ASME,"ASME B30.25-2018-R2023 Scrap and Material Handlers"
2018,ASME,"ASME B30.29-2018-R2023 Self-Erecting Tower Cranes"
2023,ASME,"ASME B31G-2023 Manual for Determining the Remaining Strength of Corroded Pipelines"
2008,ASME,"ASME B94.9-2008-R2023 Taps: Ground Thread with Cut Thread Appendix (Inch and Metric Sizes)"
2023,ASME,"ASME BTH-1-2023 Design of Below-the-Hook Lifting Devices"
2023,ASME,"ASME HST-1-2023 Performance Standard for Electric Chain Hoists"
2023,ASME,"ASME HST-2-2023 Performance Standard for Hand Chain Manually Operated Chain Hoists"
2022,ASME,"ASME PTC-19.5-2022 Flow Measurement"
2023,ASME,"ASME AG-1-2023 Code on Nuclear Air and Gas Treatment"
2023,ASME,"ASME B16.38-2023 Large Metallic Valves for Gas Distribution"
2023,ASME,"ASME B16.44-2023 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi"
2023,ASME,"ASME B16.49-2023 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems"
2023,ASME,"ASME B31P-2023 Standard Heat Treatments for Piping"
2023,ASME,"ASME B89.1.9-2023 Gage Blocks"
2023,ASME,"ASME PVHO-1-2023 Safety Standard for Pressure Vessels for Human Occupancy"
2023,ASME,"ASME TES-1-2023 Safety Standard for Thermal Energy Storage Systems: Molten Salt"
2023,ASME,"ASME BPVC CODE CASES: Boilers and Pressure Vessels, Supplement 2"
2023,ASME,"ASME BPVC CODE CASES: Nuclear Components, Supplement 2"
2023,ASME,"ASME A90.1-2023 Safety Standard for Belt Manlifts"
2023,ASME,"ASME B16.20-2023 Metallic Gaskets for Pipe Flanges"
2023,ASME,"ASME B31.12-2023 Hydrogen Piping and Pipelines"
2023,ASME,"ASME PTC 25-2023 Pressure Relief Devices"
2023,ASME,"ASME TDP-1-2023 Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fueled Plants"
2024,ASME,"ASME A112.19.1-2024/CSA B45.2:24 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures"
2023,ASME,"ASME A17.2-2023 Guide for Inspection of Elevators, Escalators, and Moving Walks"
2023,ASME,"ASME A17.3-2023 Safety Code for Existing Elevators and Escalators"
2023,ASME,"ASME A18.1-2023 Safety Standard for Platform Lifts and Stairway Chairlifts"
2024,ASME,"ASME B16.33-2024 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi"
2023,ASME,"ASME B31J-2023 Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components"
2023,ASME,"ASME PTC 4.4-2023 Gas Turbine Heat Recovery Steam Generators"
2024,ASME,"ANS/ASME RA-S-1.1-2024 Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications"
2023,ASME,"ASME RTP-1-2023 Reinforced Thermoset Plastic Corrosion-Resistant Equipment"