ASTM F2460-06
Historical Standard: ASTM F2460-06 Standard Practice for Special Requirements for Bumper Boats
SUPERSEDED (see Active link, below)
ASTM F2460
1. Scope
1.1 This practice establishes criteria for the design, manufacture, and operations of bumper boats. These are boats used to bump into each other intentionally as directed by drivers as a form of entertainment. Boats are fitted with an inflatable or impact attenuating device to allow for such bumping.
1.2 This practice follows Practices F 1193 and F 770 as the basic level of safety for bumper boats. These practices shall be followed for all bumper boats under this practice. This practice shall include all modifications, improvements, and deviations to design, quality, manufacture, construction, ownership, operation, inspection, and maintenance of a bumper boat
1.3 This practice does not apply to personal watercraft, human powered watercraft, or watercraft used for general purposes by private owners.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
SAE Standards
SAEJ1171 External Ignition Protection of Marine Electrical DevicesASTM Standards
F770 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
F853 Practice for Maintenance Procedures for Amusement Rides and Devices
F1159 Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
Keywords
amusement rides and devices; operating procedures; Bumper boats; Operating procedures; Amusement rides/devices;
ICS Code
ICS Number Code 47.080 (Small craft)
DOI: 10.1520/F2460-06
ASTM International is a member of CrossRef.