ASTM F1788-97
Historical Standard: ASTM F1788-97 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
SUPERSEDED (see Active link, below)
ASTM F1788
1. Scope
1.1 This guide covers the use of in-situ burning to assist in the control of oil spills on water. This guide is not applicable to in-situ burning of oil on land.
1.2 The purpose of this guide is to provide information that will enable spill responders to decide if burning will be used as part of the oil spill cleanup response.
1.3 This is the general guide only. It is assumed that conditions at the spill site have been assessed and that these conditions are suitable for the burning of oil. It is also assumed that permission to burn the oil has been obtained. Variations in the behavior of different oil types are not dealt with and may change some of the parameters noted in this guide.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
F1990 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F2152 Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
Keywords
fire-resistant booms; in-situ burning; oil-spill burning; oil-spill containment; oil-spill disposal; Booms; Fire-resistant booms; In-situ oil spill response/treatment; Oil spill control systems;
ICS Code
ICS Number Code 13.060.10 (Water of natural resources)
DOI: 10.1520/F1788-97
ASTM International is a member of CrossRef.
