1. Scope

1.1 This consumer safety performance specification provides safety and performance standards for various types of public playground equipment. Its purpose is to reduce life-threatening and debilitating injuries.

1.2 The range of users encompassed by this consumer safety performance specification is the 5th percentile 2-year-old through the 95th percentile 12-year-old.

1.3 Home playground equipment, toys, amusement rides, sports equipment, fitness equipment intended for users over the age of 12, public use play equipment for children 6 to 24 months, and soft contained play equipment are not included in this specification.

1.4 Products or materials (site furnishings) that are installed outside the equipment use zone, such as benches, tables, and borders, used to contain protective surfacing, are not considered playground equipment and are not included in this specification.

1.5 This specification does not address accessibility, except as it pertains to safety issues not covered in the Americans with Disabilities Act Accessibility Guidelines (ADAAG).

1.6 This consumer safety performance specification includes the following sections:

1.7 General Measures, Tolerances, and Conversions

1.7.1 The general tolerances for this specification (unless otherwise specified) are as follows:

These tolerances still apply to a dimension even when terms like greater than, less than, minimum, or maximum are used.

1.7.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only.

1.7.3 The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 0.45359 kg.

1.7.4 See for figures referenced throughout this specification.

1.7.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D2240 Test Method for Rubber Property--Durometer Hardness

F698 Specification for Physical Information to be Provided for Amusement Rides and Devices

F846 Guide for Testing Performance of Amusement Rides and Devices

F853 Practice for Maintenance Procedures for Amusement Rides and Devices

F893 Guide for Auditing Amusement Rides and Devices

F963 Consumer Safety Specification for Toy Safety

F1004 Consumer Safety Specification for Expansion Gates and Expandable Enclosures

F1077 Guide for Selection of Committee F16 Fastener Specifications

F1148 Consumer Safety Performance Specification for Home Playground Equipment

F1159 Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures

F1292 Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

F1918 Safety Performance Specification for Soft Contained Play Equipment

F1951 Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

F2373 Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months

ANSI Standards

Keywords

consumer safety; playground equipment; public use: Accessible playgrounds; Arch climbers; Completely-bounded openings; Consumer safety specifications (playgrounds); Entrapment/entanglement; Handrail systems; Nonrigid completely-bounded openings; Pinch/crush/shear points; Playground equipment--specifications; Safety precautions--consumer materials/applications; Slides (playground); Swings;

ICS Code

ICS Number Code 97.200.40 (Playgrounds)

DOI: 10.1520/F1487-07AE01

ASTM International is a member of CrossRef.