1. Scope

1.1 This practice offers a set of instructions for collecting data to be used in assessing the sustainability of building products for use in both commercial and residential buildings.

1.1.1 There are many features of a building that contribute to sustainability; one of them is the selection of products for use in a building. Other key features influencing sustainability include, but are not limited to: overall efficiency of the design of the building, the impact the building has on the habits of the occupants, and the impact the building has on the microclimate and macroclimate. This standard addresses sustainability issues related to building products. This standard does not address sustainability issues related to overall building design, site selection, building operations, or other features influencing sustainability.

1.1.2 While it is recommended that users rely on professional judgment informed by both environmental expertise and specific knowledge of the intended use of the product, this standard provides no instruction as to interpretation of the data obtained. Interpretation of the data obtained is the responsibility of the user of this standard.

1.1.3 This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word 'Standard' in the title means only that the document has been approved through the ASTM consensus process.

1.2 This standard is organized according to the Construction Specifications Institute's (CSI) MasterFormat sections to promote consistency in the evaluation of building products.

1.3 This standard includes general, comprehensive data requirements. Depending upon the building product, certain data requirements may not apply given the unique characteristics of the product and the potential environmental impacts related to the intended use of the product. Depending upon the building product, certain data requirements may need to be added as appropriate to the unique characteristics of the product and the potential environmental impacts related to the intended use of the product.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C989 Specification for Slag Cement for Use in Concrete and Mortars

C1240 Specification for Silica Fume Used in Cementitious Mixtures

D5359 Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

D6400 Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

E631 Terminology of Building Constructions

E1480 Terminology of Facility Management (Building-Related)

E2114 Terminology for Sustainability Relative to the Performance of Buildings

ANSI Standards

Keywords

building product; energy efficiency; environmental; green building; IEQ; indoor environmental quality; sustainable; sustainable development; sustainability;

ICS Code

ICS Number Code 91.010.99 (Other aspects)

DOI: 10.1520/E2129-03

ASTM International is a member of CrossRef.