ASTM D7460-08
Historical Standard: ASTM D7460-08 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
SUPERSEDED (see Active link, below)
ASTM D7460
1. Scope
1.1 This test method provides procedures for determining a unique failure point for estimating the fatigue life of 380 mm (14.96 in.) long by 50 mm (1.97 in.) thick by 63 mm (2.48 in.) wide asphalt concrete beam specimens sawed from laboratory or field compacted asphalt concrete, which are subjected to repeated flexural bending.
1.2 The between-laboratory reproducibility of this test method is being determined and will be available on or before June 2013. Therefore, this test method should not be used for acceptance or rejection of a material for purchasing purposes.
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D75 Practice for Sampling Aggregates
D140 Practice for Sampling Bituminous Materials
D979 Practice for Sampling Bituminous Paving Mixtures
D2041 Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
D3203 Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
D3549 Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
D3666 Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D5361 Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
AASHTO Standards
R30 Standard Practice for Mixture Conditioning of Hot-Mix Asphalt (HMA)Keywords
asphalt concrete fatigue; asphalt concrete flexural testing; asphalt concrete stiffness; asphalt concrete tensile testing; fatigue life; flexural bending; Asphalt concrete; Fatigue life; Flexural testing;
ICS Code
ICS Number Code 91.100.50 (Binders. Sealing materials)
DOI: 10.1520/D7460-08
ASTM International is a member of CrossRef.