ASTM C842-99
Historical Standard: ASTM C842-99 Standard Specification for Application of Interior Gypsum Plaster
SUPERSEDED (see Active link, below)
ASTM C842
1. Scope
1.1 This specification covers the minimum requirements for full-thickness (in accordance with Table 6) interior gypsum plastering on gypsum, metal, masonry, or monolithic concrete bases designed or prepared to receive gypsum plaster.
Note 1-To secure desirable results, this specification should be coordinated with the provisions of Specification C 841. General information concerning full thickness gypsum plastering is contained in Annex A2, A3, and A4.
1.2 the values stated in inch-pound units are to be regarded as the standard. The SI (metric) values shown in parentheses are approximate and are provided for information purposes only.
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C5 Specification for Quicklime for Structural Purposes
C11 Terminology Relating to Gypsum and Related Building Materials and Systems
C28/C28M Specification for Gypsum Plasters
C35 Specification for Inorganic Aggregates for Use in Gypsum Plaster
C59/C59M Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M Specification for Gypsum Keenes Cement
C206 Specification for Finishing Hydrated Lime
C423 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C631 Specification for Bonding Compounds for Interior Gypsum Plastering
C841 Specification for Installation of Interior Lathing and Furring
C1489 Specification for Lime Putty for Structural Purposes
E90 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E492 Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
Keywords
aggregate; basecoat; ceiling; finish coat; gypsum; lath; plaster; texture;Installation--gypsum products; Interior lathing and furring; Plaster--specifications; Gypsum plaster--specifications;
ICS Code
ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
DOI: 10.1520/C0842-99
ASTM International is a member of CrossRef.