Historical Standard: ASTM C754-09 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
SUPERSEDED (see Active link, below)
1.1 This specification covers the minimum requirements for the installation of interior nonstructural steel framing and furring members designed to receive screw-attached gypsum panel products. The steel framing and furring members covered in this specification are limited to those complying with Specification C 645
1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A641/A641M Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A1008/A1008M Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
C11 Terminology Relating to Gypsum and Related Building Materials and Systems
C645 Specification for Nonstructural Steel Framing Members
C840 Specification for Application and Finishing of Gypsum Board
AISI StandardAISICOSP Code of Standard Practice for Cold-Formed Steel Structural Framing - 2006 Edition
channel; framing; framing member; furring; grid suspension system; gypsum panel product; hangers; hanger wire; main runners; rigid furring channel; runner; stud; suspended ceiling; tie wire; Gypsum products--specifications; Installation--gypsum products; Screws (gypsum board applications)--specifications; Studs--gypsum board applications; Studs (materials/applications)--specifications;
ICS Number Code 91.060.10 (Walls. Partitions. Facades); 91.100.10 (Cement. Gypsum. Lime. Mortar)