ASTM C658-98
Historical Standard: ASTM C658-98 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
SUPERSEDED (see Active link, below)
ASTM C658
1. Scope
1.1 This specification covers the requirements for chemical-resistant resin grouts for filling joints of chemical-resistant brick or tile units. (For mortars, see Specification C395.)
1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.
Note-Resin tile grouts are applied to joints, generally 1/4 in. (6 mm) wide, after the chemical-resistant brick or tile units are set in place on a horizontal substrate (grouting or tilesetters method). Resin mortars are trowelled on the sides and bottom of brick or tile units, generally 1/8 in. (3 mm) in thickness, before the brick or tile units are laid in place (buttering or brick-layers method). Refer to Specification C395.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C307 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C395 Specification for Chemical-Resistant Resin Mortars
C413 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C531 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C579 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C723 Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C904 Terminology Relating to Chemical-Resistant Nonmetallic Materials
Keywords
brick; chemical-resistant; grout; tile ;
ICS Code
ICS Number Code 91.100.15 (Mineral materials and products)
DOI: 10.1520/C0658-98
ASTM International is a member of CrossRef.