ASTM C536-83(1998)
Historical Standard: ASTM C536-83(1998) Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
SUPERSEDED (see Active link, below)
ASTM C536
1. Scope
1.1 This test method covers the detection of discontinuities in the glass coating of glassed steel equipment where such discontinuities would result in early failure due to the attack of the chemical contents of the vessel on the metal substrate. It is applicable to (1) provide a manufacturing and inspection test of glassed-steel equipment designed for relatively mild, low-temperature corrosive service, and (2) the field testing of similar equipment used in more severely corrosive environment.
Note 1-A manufacturing test method for the latter type of equipment is described in Method C537.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C537 Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
Keywords
continuity of coating; discontinuities; glass coated steel equipment; glass coating; high voltage test; porcelain enamel; Coating continuity; Defects--coatings; Discontinuities--rock; Electrical measurements; Glass (coated/uncoated); Glassed steel equipment; Coating continuity; Defects--coatings; Discontinuities--rock; Electrical measurements; Glass (coated/uncoated); Glassed steel equipment;
ICS Code
ICS Number Code 25.220.50 (Enamels)
DOI: 10.1520/C0536-83R98
ASTM International is a member of CrossRef.