Abstract

This practice covers procedures for sampling bulk and bagged ceramic whiteware clays. For bulk shipment consisting lumps, samples shall be taken from different parts of the rail car or truck during unloading. Sampling of hopper car or hopper truck shipments is to be done during unloading of the car or truck. For bulk shipment consisting shredded or coarsely ground clay, samples may be taken with a shovel, or with a grain sampler. For bagged lots of ground or air-floated clay, samples may be taken by a grain-sampler or similar sampling instrument. For a clay shipped in slurry form, a sample may be obtained by taking a single grab sample from any portion of the shipment except by skimming the top surface.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Significance and Use

Since many tests are performed using very small amounts of powder, it is most important that the test portions be obtained in a standardized manner. The practices described here take into account the possibility of segregation and variability of the ceramic powder in containers of the various sizes and numbers, both in dry and slurry forms.

1. Scope

1.1 This practice covers procedures for sampling bulk and bagged shipments of ceramic whiteware clays.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords

clay; sampling; Ceramic whiteware clays; Sampling ceramic materials/applications ;

ICS Code

ICS Number Code 91.100.25 (Terracotta building products)

DOI: 10.1520/C0322-09

ASTM International is a member of CrossRef.

ASTM C322