ASTM A513-08
Historical Standard: ASTM A513-08 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
SUPERSEDED (see Active link, below)
1. Scope
1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing.
1.2 This specification covers mechanical tubing made from hot- or cold-rolled steel.
1.3 This specification covers round, square, rectangular, and special shape tubing.
|
Type |
Size Range (Round Tubing) |
|
Electric-Resistance-Welded Tubing from Hot-Rolled Steel |
outside diameter from 1 / 2 to 15 in. (19.0 to 381.0 mm) |
|
wall from 0.065 to 0.650 in. (1.65 to 16.50 mm) |
|
|
Electric-Resistance-Welded Tubing from Cold-Rolled Steel |
outside diameter from 3 / 8 to 12 in. (9.92 to 304.8 mm) |
|
wall from 0.022 to 0.134 in. (0.71 to 3.40 mm) |
1.4 Optional supplementary requirements are provided and when desired, shall be so stated in the order.
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A1040 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E273 Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E1806 Practice for Sampling Steel and Iron for Determination of Chemical Composition
ANSI Standard
B46.1 Surface TextureMilitary Standards
MIL-STD-129 Marking for Shipment and StorageFederal Standard
Fed.Std.No.123 Marking for Shipments (Civil Agencies)Keywords
Alloy steel tube; Carbon steel tube; mechanical tubing; resistance welded steel tube; steel tube; welded steel tube;
ICS Code
ICS Number Code 23.040.10 (Iron and steel pipes)
DOI: 10.1520/A0513-08
ASTM International is a member of CrossRef.
