Course & CEU
Land Use and Development
Rules & Regulations
Measurement of Oxygen Transfer in Clean Water, 2nd Edition was developed to measure the rate of oxygen transfer from diffused gas and mechanical oxygenation devices to water. The standard is applicable to laboratory-scale oxygenation devices with small volumes of water as well as to full-scale systems with water volumes typical of those found in the activated sludge wastewater treatment process. It is intended that this standard be used by engineers in the preparation of specifications for compliance testing. This test method is based upon removal of dissolved oxygen (DO) from the water volume by sodium sulfite followed by reoxygenation to near the saturation level. The DO inventory of the water volume is monitored during the rearation period by measuring DO concentrations at several points, selected so that each point senses an equal tank volume. The method specifies a minimum number, distribution, and range of DO measurements at each point. This procedure is valid for a wide variety of mixing conditions. The primary result of this testing is expressed as the standard oxygen transfer rate (SOTR). The standard also describes how clean water tests can be applied to estimate oxygen transfer rate in process water. In addition, various components of power consumption are defined; methods for measurement of gas rate and power consumption by oxygenation devices are given; and the preparation of data analysis is discussed.
Customers who bought this book also bought...
The following editions for this book are also available...
This book also exists in the following packages...
MADCAD.com ASCE subscriptions are annual and access is concurrency based (number of people that can access the subscription at any given time).
Some features of MADCAD.com ASCE Subscriptions are:
- Floating concurrency model: Set your concurrency level and share your ASCE Subscriptions among your offices enterprise-wide.
- Immediate Access: As soon as the transaction is completed, your ASCE Subscription will be ready for access.
For any further information on MADCAD.com ASCE Subscriptions, please contact us at firstname.lastname@example.org or +1 800.798.9296.
Founded in 1852, the American Society of Civil Engineers (ASCE) represents more than 140,000 members of the civil engineering profession worldwide and is America's oldest national engineering society. ASCE's Mission Provide essential value to our members and partners, advance civil engineering, and serve the public good.
US LOCAL CODES
US Territory Code Adoptions / Amendments
US State Code Adoptions / Amendments