2000,ASTM,"A307-00 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2002,ASTM,"A307-02 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2003,ASTM,"A307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2004,ASTM,"A307-04 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2007,ASTM,"A307-07 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2007,ASTM,"A307-07a Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2007,ASTM,"A307-07b Standard Specification for  Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2000,ASTM,"A325-00 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2002,ASTM,"A325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2004,ASTM,"A325-04 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2004,ASTM,"A325-04a Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2004,ASTM,"A325-04b Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2006,ASTM,"A325-06 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2007,ASTM,"A325-07 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2007,ASTM,"A325-07a Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2009,ASTM,"A325-09 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2000,ASTM,"A325M-00 Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]"
2003,ASTM,"A325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]"
2004,ASTM,"A325M-04 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2004,ASTM,"A325M-04a Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2004,ASTM,"A325M-04b Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2005,ASTM,"A325M-05 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2007,ASTM,"A325M-07 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2008,ASTM,"A325M-08 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2009,ASTM,"A325M-09 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]"
2000,ASTM,"A354-00a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2001,ASTM,"A354-01 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2003,ASTM,"A354-03 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2003,ASTM,"A354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2004,ASTM,"A354-04 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2007,ASTM,"A354-07 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2007,ASTM,"A354-07a Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2000,ASTM,"A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs"
2004,ASTM,"A449-04 Standard Specification for Quenched and Tempered Steel Bolts and Studs"
2004,ASTM,"A449-04a Standard Specification for Quenched and Tempered Steel Bolts and Studs"
2004,ASTM,"A449-04b Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2007,ASTM,"A449-07 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2007,ASTM,"A449-07a Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2007,ASTM,"A449-07b Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2000,ASTM,"A489-00 Standard Specification for Carbon Steel Lifting Eyes"
2003,ASTM,"A489-03 Standard Specification for Carbon Steel Lifting Eyes"
2004,ASTM,"A489-04 Standard Specification for Carbon Steel Lifting Eyes"
2000,ASTM,"A490-00 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2002,ASTM,"A490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2004,ASTM,"A490-04 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2004,ASTM,"A490-04a Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2006,ASTM,"A490-06 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2008,ASTM,"A490-08 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2008,ASTM,"A490-08a Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2008,ASTM,"A490-08b Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2000,ASTM,"A490M-00 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2003,ASTM,"A490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2004,ASTM,"A490M-04 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2004,ASTM,"A490M-04a Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2008,ASTM,"A490M-08 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2000,ASTM,"A563-00 Standard Specification for Carbon and Alloy Steel Nuts"
2004,ASTM,"A563-04 Standard Specification for Carbon and Alloy Steel Nuts"
2004,ASTM,"A563-04a Standard Specification for Carbon and Alloy Steel Nuts"
2007,ASTM,"A563-07 Standard Specification for Carbons and Alloy Steel Nuts"
2007,ASTM,"A563-07a Standard Specification for  Carbons and Alloy Steel Nuts"
2000,ASTM,"A563M-00 Standard Specification for Carbon and Alloy Steel Nuts [Metric]"
2001,ASTM,"A563M-01 Standard Specification for Carbon and Alloy Steel Nuts [Metric]"
2003,ASTM,"A563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]"
2004,ASTM,"A563M-04 Standard Specification for Carbon and Alloy Steel Nuts [Metric]"
2006,ASTM,"A563M-06 Standard Specification for Carbon and Alloy Steel Nuts [Metric)"
2007,ASTM,"A563M-07 Standard Specification for  Carbon and Alloy Steel Nuts [Metric]"
2000,ASTM,"A574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws"
2004,ASTM,"A574-04 Standard Specification for Alloy Steel Socket-Head Cap Screws"
2008,ASTM,"A574-08 Standard Specification for Alloy Steel Socket-Head Cap Screws"
2000,ASTM,"A574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]"
2004,ASTM,"A574M-04 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]"
2008,ASTM,"A574M-08 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]"
2000,ASTM,"F1137-00 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners"
2006,ASTM,"F1137-00(2006) Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners"
2004,ASTM,"F1554-04 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2007,ASTM,"F1554-07 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2007,ASTM,"F1554-07a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
1999,ASTM,"F1554-99 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2000,ASTM,"F1667-00 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2001,ASTM,"F1667-01 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2001,ASTM,"F1667-01a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2002,ASTM,"F1667-02 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2002,ASTM,"F1667-02a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2003,ASTM,"F1667-03 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2005,ASTM,"F1667-05 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2002,ASTM,"F436-02 Standard Specification for Hardened Steel Washers"
2003,ASTM,"F436-03 Standard Specification for Hardened Steel Washers"
2004,ASTM,"F436-04 Standard Specification for Hardened Steel Washers"
2007,ASTM,"F436-07 Standard Specification for Hardened Steel Washers"
2007,ASTM,"F436-07a Standard Specification for  Hardened Steel Washers"
2009,ASTM,"F436-09 Standard Specification for  Hardened Steel Washers"
2000,ASTM,"F436-93(2000) Standard Specification for Hardened Steel Washers"
2003,ASTM,"F436M-03 Standard Specification for Hardened Steel Washers [Metric]"
2004,ASTM,"F436M-04 Standard Specification for Hardened Steel Washers [Metric]"
2009,ASTM,"F436M-09 Standard Specification for Hardened Steel Washers [Metric]"
2000,ASTM,"F436M-93(2000) Standard Specification for Hardened Steel Washers [Metric]"
2001,ASTM,"F468-01 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2001,ASTM,"F468-01a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2003,ASTM,"F468-03 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2003,ASTM,"F468-03a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2005,ASTM,"F468-05 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2005,ASTM,"F468-05a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2006,ASTM,"F468-06 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2006,ASTM,"F468-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
1998,ASTM,"F468-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2001,ASTM,"F547-01 Standard Terminology of Nails for Use with Wood and Wood-Base Materials"
2006,ASTM,"F547-06 Standard Terminology of Nails for Use with Wood and Wood-Base Materials"
1995,ASTM,"F547-77(1995) Standard Terminology of Nails for Use with Wood and Wood-Base Materials"
2007,ASTM,"F568M-07 Standard Specification for  Carbon and Alloy Steel Externally Threaded Metric Fasteners"
2001,ASTM,"F593-01 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs"
2002,ASTM,"F593-02 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs"
2008,ASTM,"F593-02(2008)  Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
1998,ASTM,"F593-98 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs"
2001,ASTM,"F594-01 Standard Specification for Stainless Steel Nuts"
2002,ASTM,"F594-02 Standard Specification for Stainless Steel Nuts"
2008,ASTM,"F594-08 Standard Specification for  Stainless Steel Nuts"
1998,ASTM,"F594-98 Standard Specification for Stainless Steel Nuts"
2000,ASTM,"F738M-00 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs"
2001,ASTM,"F738M-01 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs"
2002,ASTM,"F738M-02 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs"
2008,ASTM,"F738M-02(2008) Standard Specification for  Stainless Steel Metric Bolts, Screws, and Studs"
2004,ASTM,"F835M-04 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2002,ASTM,"F836M-02 Standard Specification for Style 1 Stainless Steel Metric Nuts"
2008,ASTM,"F837-08 Standard Specification for Stainless Steel Socket Head Cap Screws"
2002,ASTM,"F837M-02a Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]"
2007,ASTM,"F844-07a Standard Specification for  Washers, Steel, Plain (Flat), Unhardened for General Use"
2001,ASTM,"F879-01 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
2002,ASTM,"F879-02 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
2002,ASTM,"F879-02a Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
2008,ASTM,"F879-02a(2008) Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
1998,ASTM,"F879-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
2001,ASTM,"F879M-01 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2002,ASTM,"F879M-02 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2002,ASTM,"F879M-02a Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2008,ASTM,"F879M-02a(2008) Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)"
1998,ASTM,"F879M-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2001,ASTM,"F959-01 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2001,ASTM,"F959-01a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2002,ASTM,"F959-02 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2004,ASTM,"F959-04 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2005,ASTM,"F959-05 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2005,ASTM,"F959-05a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2006,ASTM,"F959-06 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2007,ASTM,"F959-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2007,ASTM,"F959-07a Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
1999,ASTM,"F959-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2001,ASTM,"F959M-01a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2002,ASTM,"F959M-02 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2006,ASTM,"F959M-06 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2007,ASTM,"F959M-07 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
1999,ASTM,"F959M-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2009,ASTM,"A490M-09 Standard Specification for  High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2009,ASTM,"F959-09 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners"
2008,ASTM,"A394-08 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2005,ASTM,"F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications"
2005,ASTM,"F1428-92(2005) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners"
2004,ASTM,"F1469-99(2004) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing"
2009,ASTM,"F1470-09 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection"
2007,ASTM,"F1503-02(2007) Standard Practice for Machine/Process Capability Study Procedure"
2008,ASTM,"F1575-03(2008) Standard Test Method for Determining Bending Yield Moment of Nails"
2008,ASTM,"F1852-08 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2007,ASTM,"F1940-07a Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners"
2007,ASTM,"F1941-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))"
2007,ASTM,"F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]"
2008,ASTM,"F2094/F2094M-08 Standard Specification for Silicon Nitride Bearing Balls"
2008,ASTM,"F2215-08 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2004,ASTM,"F2281-04 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications"
2005,ASTM,"F2328-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs"
2007,ASTM,"F2328M-07 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]"
2009,ASTM,"F2403-09 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength"
2008,ASTM,"F2482-08 Standard Specification for Load-Indicating Externally Threaded Fasteners"
2006,ASTM,"F592-84(2006) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools"
2007,ASTM,"F680-80(2007) Standard Test Methods for  Nails"
2008,ASTM,"F788/F788M-08 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2007,ASTM,"F812/F812M-07 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series"
2008,ASTM,"F880-02(2008) Standard Specification for  Stainless Steel Socket-Set Screws"
2008,ASTM,"F880M-02(2008)  Standard Specification for  Stainless Steel Socket Set Screws (Metric)"
2007,ASTM,"F901-01(2007) Standard Specification for Aluminum Transmission Tower Bolts and Nuts"
2009,ASTM,"A325-09a Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2009,ASTM,"A490-09 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2009,ASTM,"A490M-09a Standard Specification for  High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2010,ASTM,"F2161-10 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils"
2008,ASTM,"F2162-01(2008) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type"
2008,ASTM,"F2163-01(2008) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring"
2009,ASTM,"F594-09 Standard Specification for  Stainless Steel Nuts"
2009,ASTM,"A31-04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels"
2010,ASTM,"A325-10 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2010,ASTM,"A490-10 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2009,ASTM,"A502-03(2009) Standard Specification for Rivets, Steel, Structural"
2005,ASTM,"F2329-05 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners"
2004,ASTM,"F2430-04 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)"
2004,ASTM,"F2431-04 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring"
2006,ASTM,"F2437-06 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs"
2004,ASTM,"F2443-04 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End"
2004,ASTM,"F2444-04 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques"
2005,ASTM,"F2488-05 Standard Terminology for Rolling Element Bearings"
2006,ASTM,"F2489-06 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases"
2006,ASTM,"F2591-06 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)"
2007,ASTM,"F2661-07 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer"
2008,ASTM,"F2688-08 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers"
2010,ASTM,"F436-10 Standard Specification for  Hardened Steel Washers"
2010,ASTM,"F436M-10 Standard Specification for Hardened Steel Washers [Metric]"
2010,ASTM,"F606-10 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2010,ASTM,"F606M-10 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2010,ASTM,"F1789-10a Standard Terminology for F16 Mechanical Fasteners"
2010,ASTM,"F432-10 Standard Specification for Roof and Rock Bolts and Accessories"
2010,ASTM,"F468-10 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2010,ASTM,"F879-10 Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap Screws"
2005,ASTM,"F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications (Redline)"
2007,ASTM,"F1940-07a Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners (Redline)"
2007,ASTM,"F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Redline)"
2010,ASTM,"F2161-10 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils (Redline)"
2010,ASTM,"A307-10 Standard Specification for  Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2010,ASTM,"A449-10 Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2010,ASTM,"A490-10a Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2010,ASTM,"A490M-10 Standard Specification for  High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2004,ASTM,"A574-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws"
2004,ASTM,"A574M-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]"
2010,ASTM,"F1667-10 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples"
2011,ASTM,"F1667-11 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2004,ASTM,"F835-04 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2001,ASTM,"F836M-01 Standard Specification for Style 1 Stainless Steel Metric Nuts"
2001,ASTM,"F836M-01a Standard Specification for Style 1 Stainless Steel Metric Nuts"
1998,ASTM,"F836M-98 Standard Specification for Style 1 Stainless Steel Metric Nuts"
2001,ASTM,"F837-01 Standard Specification for Stainless Steel Socket Head Cap Screws"
2002,ASTM,"F837-02a Standard Specification for Stainless Steel Socket Head Cap Screws"
2002,ASTM,"F837-02ae1 Standard Specification for Stainless Steel Socket Head Cap Screws"
1998,ASTM,"F837-98 Standard Specification for Stainless Steel Socket Head Cap Screws"
2000,ASTM,"F837M-00 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]"
2001,ASTM,"F837M-01 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]"
2010,ASTM,"F837M-02a(2010) Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]"
2004,ASTM,"F844-04 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use"
2004,ASTM,"F844-04e1 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use"
2001,ASTM,"F959M-01 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2011,ASTM,"A574-11 Standard Specification for Alloy Steel Socket-Head Cap Screws"
2011,ASTM,"A574M-11 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]"
2011,ASTM,"F1137-11 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners"
2011,ASTM,"F436-11 Standard Specification for  Hardened Steel Washers"
2009,ASTM,"F594-09e1 Standard Specification for  Stainless Steel Nuts"
2011,ASTM,"F835M-11 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)"
2010,ASTM,"F836M-02(2010) Standard Specification for Style 1 Stainless Steel Metric Nuts"
2004,ASTM,"A31-04e1 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels"
2004,ASTM,"A31-04 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels"
2000,ASTM,"A31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels"
2008,ASTM,"F432-08 Standard Specification for Roof and Rock Bolts and Accessories"
2004,ASTM,"F432-04 Standard Specification for Roof and Rock Bolts and Accessories"
2001,ASTM,"F432-95(2001) Standard Specification for Roof and Rock Bolts and Accessories"
1995,ASTM,"F432-95 Standard Specification for Roof and Rock Bolts and Accessories"
2011,ASTM,"F436-11 Standard Specification for  Hardened Steel Washers (Redline)"
2006,ASTM,"F467M-06ae2 Standard Specification for  Nonferrous Nuts for General Use (Metric)"
2006,ASTM,"F467M-06a Standard Specification for Nonferrous Nuts for General Use [Metric]"
2006,ASTM,"F467M-06 Standard Specification for Nonferrous Nuts for General Use [Metric]"
2005,ASTM,"F467M-05 Standard Specification for Nonferrous Nuts for General Use [Metric]"
2003,ASTM,"F467M-03a Standard Specification for Nonferrous Nuts for General Use [Metric]"
2003,ASTM,"F467M-03 Standard Specification for Nonferrous Nuts for General Use [Metric]"
2001,ASTM,"F467M-01a Standard Specification for Nonferrous Nuts for General Use [Metric]"
2001,ASTM,"F467M-01 Standard Specification for Nonferrous Nuts for General Use [Metric]"
1998,ASTM,"F467M-98 Standard Specification for Nonferrous Nuts for General Use [Metric]"
2008,ASTM,"F467-08e1 Standard Specification for  Nonferrous Nuts for General Use"
2008,ASTM,"F467-08 Standard Specification for  Nonferrous Nuts for General Use"
2006,ASTM,"F467-06ae1 Standard Specification for  Nonferrous Nuts for General Use"
2006,ASTM,"F467-06a Standard Specification for Nonferrous Nuts for General Use"
2006,ASTM,"F467-06 Standard Specification for Nonferrous Nuts for General Use"
2005,ASTM,"F467-05 Standard Specification for Nonferrous Nuts for General Use"
2003,ASTM,"F467-03a Standard Specification for Nonferrous Nuts for General Use"
2003,ASTM,"F467-03 Standard Specification for Nonferrous Nuts for General Use"
2001,ASTM,"F467-01a Standard Specification for Nonferrous Nuts for General Use"
2001,ASTM,"F467-01 Standard Specification for Nonferrous Nuts for General Use"
1998,ASTM,"F467-98 Standard Specification for Nonferrous Nuts for General Use"
2006,ASTM,"F468M-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2006,ASTM,"F468M-06 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2005,ASTM,"F468M-05a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2005,ASTM,"F468M-05 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2003,ASTM,"F468M-03a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2003,ASTM,"F468M-03 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2001,ASTM,"F468M-01a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2001,ASTM,"F468M-01 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
1998,ASTM,"F468M-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]"
2001,ASTM,"F468-01e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use"
2004,ASTM,"F541-04e1 Standard Specification for Alloy Steel Eyebolts"
2004,ASTM,"F541-04 Standard Specification for Alloy Steel Eyebolts"
2000,ASTM,"F541-00 Standard Specification for Alloy Steel Eyebolts"
2001,ASTM,"F592-84(2001) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools"
1995,ASTM,"F592-84(1995) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools"
2002,ASTM,"F593-02e2 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs"
2002,ASTM,"F593-02e1 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs"
1998,ASTM,"F594-98e1 Standard Specification for Stainless Steel Nuts"
2004,ASTM,"A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength"
2011,ASTM,"F606M-11 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2010,ASTM,"F606M-10a Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2007,ASTM,"F606M-07e1 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2005,ASTM,"F606M-05 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2002,ASTM,"F606M-02 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
1998,ASTM,"F606M-98 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2011,ASTM,"F606-11a Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2011,ASTM,"F606-11 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2010,ASTM,"F606-10a Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2009,ASTM,"F606-09 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2007,ASTM,"F606-07 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2006,ASTM,"F606-06 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2005,ASTM,"F606-05 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets"
2002,ASTM,"F606-02e1 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets"
2002,ASTM,"F606-02 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets"
2000,ASTM,"F606-00 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets"
1998,ASTM,"F606-98 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets"
2009,ASTM,"A325-09ae1 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2002,ASTM,"F680-80(2002) Standard Test Methods for Nails"
1993,ASTM,"F680-80(1993) Standard Test Methods for Nails"
2004,ASTM,"A354-04e1 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2008,ASTM,"A394-08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2007,ASTM,"A394-07 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2005,ASTM,"A394-05e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2005,ASTM,"A394-05 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2004,ASTM,"A394-04 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2000,ASTM,"A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2007,ASTM,"F788/F788M-07 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2006,ASTM,"F788/F788M-06 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2005,ASTM,"F788/F788M-05 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2002,ASTM,"F788/F788M-02 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2003,ASTM,"F812/F812M-03 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series"
2002,ASTM,"F812/F812M-02 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series"
1997,ASTM,"F812/F812M-97 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series"
2007,ASTM,"A449-07be1 Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2004,ASTM,"A449-04be1 Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use"
2004,ASTM,"F835-04e1 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2002,ASTM,"F880-02 Standard Specification for Stainless Steel Socket-Set Screws"
2001,ASTM,"F880-01a Standard Specification for Stainless Steel Socket-Set Screws"
2001,ASTM,"F880-01 Standard Specification for Stainless Steel Socket-Set Screws"
1998,ASTM,"F880-98 Standard Specification for Stainless Steel Socket-Set Screws"
2002,ASTM,"F880M-02 Standard Specification for Stainless Steel Socket Set Screws [Metric]"
2001,ASTM,"F880M-01a Standard Specification for Stainless Steel Socket Set Screws [Metric]"
2001,ASTM,"F880M-01 Standard Specification for Stainless Steel Socket Set Screws [Metric]"
1998,ASTM,"F880M-98 Standard Specification for Stainless Steel Socket Set Screws [Metric]"
2004,ASTM,"A489-04e1 Standard Specification for Carbon Steel Lifting Eyes"
2010,ASTM,"A490-10ae1 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2010,ASTM,"A490M-10e1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2004,ASTM,"A490M-04ae1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]"
2001,ASTM,"F901-01 Standard Specification for Aluminum Transmission Tower Bolts and Nuts"
1997,ASTM,"F901-97 Standard Specification for Aluminum Transmission Tower Bolts and Nuts"
2011,ASTM,"F912-11 Standard Specification for  Alloy Steel Socket Set Screws"
2011,ASTM,"F912-11 Standard Specification for  Alloy Steel Socket Set Screws (Redline)"
2004,ASTM,"F912-04e1 Standard Specification for Alloy Steel Socket Set Screws"
2004,ASTM,"F912-04 Standard Specification for Alloy Steel Socket Set Screws"
2000,ASTM,"F912-00 Standard Specification for Alloy Steel Socket Set Screws"
2011,ASTM,"F912M-11 Standard Specification for  Alloy Steel Socket Set Screws (Metric)"
2011,ASTM,"F912M-11 Standard Specification for  Alloy Steel Socket Set Screws (Metric) (Redline)"
2004,ASTM,"F912M-04e1 Standard Specification for Alloy Steel Socket Set Screws [Metric]"
2004,ASTM,"F912M-04 Standard Specification for Alloy Steel Socket Set Screws [Metric]"
2000,ASTM,"F912M-00 Standard Specification for Alloy Steel Socket Set Screws [Metric]"
2003,ASTM,"A502-03 Standard Specification for Rivets, Steel, Structural"
2002,ASTM,"F1077-95a(2002) Standard Guide for Selection of Committee F16 Fastener Specifications"
1995,ASTM,"F1077-95a Standard Guide for Selection of Committee F-16 Fastener Specifications"
2011,ASTM,"F1136/F1136M-11 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners"
2011,ASTM,"F1136/F1136M-11 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners (Redline)"
1999,ASTM,"F1428-92(1999) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners"
2011,ASTM,"F1469-11 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing"
2011,ASTM,"F1469-11 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing (Redline)"
2010,ASTM,"F1469-99(2010) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing"
1999,ASTM,"F1469-99 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing"
2002,ASTM,"F1470-02 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection"
2001,ASTM,"F1470-01 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection"
2007,ASTM,"F1554-07ae1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2004,ASTM,"F1554-04e1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2003,ASTM,"F1575-03 Standard Test Method for Determining Bending Yield Moment of Nails"
2002,ASTM,"F1575-02 Standard Test Method for Determining Bending Yield Moment of Nails"
2001,ASTM,"F1575-01 Standard Test Method for Determining Bending Yield Moment of Nails"
1995,ASTM,"F1575-95 Standard Test Method for Determining Bending Yield Moment of Nails"
2011,ASTM,"F1667-11a Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2011,ASTM,"F1789-11b Standard Terminology for F16 Mechanical Fasteners"
2011,ASTM,"F1789-11a Standard Terminology for F16 Mechanical Fasteners"
2011,ASTM,"F1789-11 Standard Terminology for F16 Mechanical Fasteners"
2010,ASTM,"F1789-10b Standard Terminology for F16 Mechanical Fasteners"
2010,ASTM,"F1789-10ae1 Standard Terminology for F16 Mechanical Fasteners"
2010,ASTM,"F1789-10 Standard Terminology for F16 Mechanical Fasteners"
2009,ASTM,"F1789-09a Standard Terminology for F16 Mechanical Fasteners"
2009,ASTM,"F1789-09 Standard Terminology for F16 Mechanical Fasteners"
2008,ASTM,"F1789-08d Standard Terminology for F16 Mechanical Fasteners"
2008,ASTM,"F1789-08c Standard Terminology for F16 Mechanical Fasteners"
2008,ASTM,"F1789-08b Standard Terminology for F16 Mechanical Fasteners"
2008,ASTM,"F1789-08a Standard Terminology for F16 Mechanical Fasteners"
2008,ASTM,"F1789-08 Standard Terminology for F16 Mechanical Fasteners"
2007,ASTM,"F1789-07c Standard Terminology for F16 Mechanical Fasteners"
2007,ASTM,"F1789-07b Standard Terminology for F16 Mechanical Fasteners"
2007,ASTM,"F1789-07a Standard Terminology for F16 Mechanical Fasteners"
2007,ASTM,"F1789-07 Standard Terminology for F16 Mechanical Fasteners"
2006,ASTM,"F1789-06c Standard Terminology for F16 Mechanical Fasteners"
2006,ASTM,"F1789-06b Standard Terminology for F16 Mechanical Fasteners"
2006,ASTM,"F1789-06a Standard Terminology for F16 Mechanical Fasteners"
2006,ASTM,"F1789-06 Standard Terminology for F16 Mechanical Fasteners"
2005,ASTM,"F1789-05d Standard Terminology for F16 Mechanical Fasteners"
2005,ASTM,"F1789-05c Standard Terminology for F16 Mechanical Fasteners"
2005,ASTM,"F1789-05b Standard Terminology for F16 Mechanical Fasteners"
2005,ASTM,"F1789-05a Standard Terminology for F16 Mechanical Fasteners"
2005,ASTM,"F1789-05 Standard Terminology for F16 Mechanical Fasteners"
2004,ASTM,"F1789-04b Standard Terminology for F16 Mechanical Fasteners"
2004,ASTM,"F1789-04a Standard Terminology for F16 Mechanical Fasteners"
2004,ASTM,"F1789-04 Standard Terminology for F16 Mechanical Fasteners"
2003,ASTM,"F1789-03a Standard Terminology for F16 Mechanical Fasteners"
2003,ASTM,"F1789-03 Standard Terminology for F16 Mechanical Fasteners"
2002,ASTM,"F1789-02b Standard Terminology of F16 Mechanical Fasteners"
2002,ASTM,"F1789-02a Standard Terminology of F16 Mechanical Fasteners"
2001,ASTM,"F1789-01b Standard Terminology of F16 Mechanical Fasteners"
2001,ASTM,"F1789-01a Standard Terminology of F16 Mechanical Fasteners"
2001,ASTM,"F1789-01 Standard Terminology of F16 Mechanical Fasteners"
2000,ASTM,"F1789-00a Standard Terminology of F16 Mechanical Fasteners"
2011,ASTM,"A354-11 Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners"
2011,ASTM,"A490-11 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2011,ASTM,"A490M-11 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2011,ASTM,"F1852-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2007,ASTM,"F1852-07 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2005,ASTM,"F1852-05 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2004,ASTM,"F1852-04a Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2004,ASTM,"F1852-04 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2002,ASTM,"F1852-02 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2000,ASTM,"F1852-00 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2007,ASTM,"F1940-07 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners"
2001,ASTM,"F1940-01 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners"
1999,ASTM,"F1940-99 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners"
2005,ASTM,"F1941M-05 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]"
2000,ASTM,"F1941M-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]"
2010,ASTM,"F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))"
2010,ASTM,"F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) (Redline)"
2000,ASTM,"F1941-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))"
2011,ASTM,"F2094/F2094M-11 Standard Specification for Silicon Nitride Bearing Balls"
2001,ASTM,"F2161-01 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils"
2001,ASTM,"F2162-01e2 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type"
2001,ASTM,"F2162-01e1 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type"
2001,ASTM,"F2162-01 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type"
2001,ASTM,"F2163-01e1 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring"
2001,ASTM,"F2163-01 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring"
2005,ASTM,"F2215-05e2 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2005,ASTM,"F2215-05e1 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2005,ASTM,"F2215-05 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2003,ASTM,"F2215-03e1 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2003,ASTM,"F2215-03 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications"
2002,ASTM,"F2215-02 Standard Specification for Balls, Bearings, Ferrous and Non-Ferrous for Use in Bearings, Valves, and Bearing Applications"
2006,ASTM,"F2246-06e1 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage"
2006,ASTM,"F2246-06 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage"
2003,ASTM,"F2246-03 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage"
2011,ASTM,"F2280-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2008,ASTM,"F2280-08e1 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2008,ASTM,"F2280-08 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2006,ASTM,"F2280-06 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2003,ASTM,"F2281-03 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications"
2009,ASTM,"F2282-03(2009)e1 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners"
2009,ASTM,"F2282-03(2009) Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners"
2003,ASTM,"F2282-03 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners"
2006,ASTM,"F2328M-06 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]"
2005,ASTM,"F2328M-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]"
2004,ASTM,"F2328M-04 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]"
2011,ASTM,"F2328-05(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs"
2004,ASTM,"F2328-04 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs"
2011,ASTM,"F2329-11 Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners"
2011,ASTM,"F2329-05(2011) Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners"
2006,ASTM,"F2332-06 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components"
2006,ASTM,"F2403-06 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength"
2005,ASTM,"F2403-05 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength"
2011,ASTM,"F2437-11 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs"
2005,ASTM,"F2482-05 Standard Specification for Load-Indicating Externally Threaded Fasteners"
2005,ASTM,"F2511-05e1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid"
2005,ASTM,"F2511-05 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid"
2006,ASTM,"F2590-06e1 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type"
2006,ASTM,"F2590-06 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type"
2008,ASTM,"F2730/F2730M-08 Standard Specification for Silicon Nitride Cylindrical Bearing Rollers"
2011,ASTM,"F2832-11 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners"
2011,ASTM,"F2833-11 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type"
2011,ASTM,"F436M-11 Standard Specification for Hardened Steel Washers [Metric]"
2011,ASTM,"F436M-11 Standard Specification for Hardened Steel Washers [Metric] (Redline)"
2008,ASTM,"F593-02(2008)e1 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs  "
2007,ASTM,"F606M-07 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
2004,ASTM,"F959M-04 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]"
2006,ASTM,"F1941-00(2006) Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))"
2011,ASTM,"F2730/F2730M-11 Standard Specification for Silicon Nitride Cylindrical Bearing Rollers"
2008,ASTM,"F880-02(2008)e1 Standard Specification for  Stainless Steel Socket-Set Screws"
2003,ASTM,"F835-03 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2000,ASTM,"F835-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2003,ASTM,"F835M-03 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2000,ASTM,"F835M-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]"
2002,ASTM,"F837-02 Standard Specification for Stainless Steel Socket Head Cap Screws"
2002,ASTM,"F837M-02 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]"
2000,ASTM,"F844-00 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use"
2011,ASTM,"F1137-11e1 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners"
2011,ASTM,"F1667-11ae1 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples "
2011,ASTM,"F1428-92(2011) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners"
2012,ASTM,"F467M-06a(2012) Standard Specification for  Nonferrous Nuts for General Use (Metric) "
2012,ASTM,"F592-84(2012) Standard Terminology of  Collated and Cohered Fasteners and Their Application Tools"
2012,ASTM,"F901-01(2012) Standard Specification for  Aluminum Transmission Tower Bolts and Nuts "
2012,ASTM,"A489-12 Standard Specification for  Carbon Steel Lifting Eyes "
2012,ASTM,"A490-12 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength "
2012,ASTM,"A490M-12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural  Steel Joints (Metric)"
2012,ASTM,"A574-12 Standard Specification for  Alloy Steel Socket-Head Cap Screws"
2012,ASTM,"A574M-12 Standard Specification for  Alloy Steel Socket-Head Cap Screws (Metric)"
2012,ASTM,"A489-12 Standard Specification for  Carbon Steel Lifting Eyes  (Redline)"
2012,ASTM,"F541-12 Standard Specification for  Alloy Steel Eyebolts  (Redline)"
2012,ASTM,"F2280-12 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2012,ASTM,"F468M-06(2012) Standard Specification for  Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) "
2012,ASTM,"F541-12 Standard Specification for  Alloy Steel Eyebolts "
2012,ASTM,"F547-06(2012) Standard Terminology of  Nails for Use with Wood and Wood-Base Materials  "
2012,ASTM,"F835-12 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws "
2012,ASTM,"F2281-04(2012) Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications"
2012,ASTM,"F468-12 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2012,ASTM,"F606M-12 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, and Rivets (Metric)"
1978,ASTM,"A307-78 Standard Specification for Carbon Steel Externally Threaded Standard Fasteners"
2012,ASTM,"F788-12 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2012,ASTM,"F812-12 Standard Specification for  Surface Discontinuities of Nuts, Inch and Metric Series"
2012,ASTM,"F879-12 Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws"
1976,ASTM,"A502-76 Standard Specification for Steel Structural Rivets"
2012,ASTM,"F1470-12 Standard Practice for  Fastener Sampling for Specified Mechanical Properties and Performance  Inspection"
2012,ASTM,"F1503-02(2012) Standard Practice for  Machine/Process Capability Study Procedure"
2002,ASTM,"F1503-02 Practice for Machine/Process Capability Study Procedure"
2012,ASTM,"F1789-12 Standard Terminology for  F16 Mechanical Fasteners"
1978,ASTM,"A449-78a Standard Specification for Quenched And Tempered Steel Bolts And Studs"
2012,ASTM,"F2437-12 Standard Specification for  Carbon and Alloy Steel Compressible-Washer-Type Direct Tension  Indicators  for Use with Cap Screws, Bolts, Anchors, and Studs"
2012,ASTM,"F2660-12 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Hydrogen Embrittlement"
2012,ASTM,"F812-12 Standard Specification for  Surface Discontinuities of Nuts, Inch and Metric Series (Redline)"
2012,ASTM,"F880-12 Standard Specification for  Stainless Steel Socket, Square Head, and Slotted Headless-Set  Screws"
2012,ASTM,"F880-12 Standard Specification for  Stainless Steel Socket, Square Head, and Slotted Headless-Set  Screws (Redline)"
2012,ASTM,"F2882-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile  Strength"
2012,ASTM,"F2953-12 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages"
0,ASTM,"F788/F788M- Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
2013,ASTM,"F959M-13 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   With Structural Fasteners (Metric)"
1995,ASTM,"F1503-95 Standard Practice for Machine/Process Potential Study Procedure"
2012,ASTM,"A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength"
1997,ASTM,"A307-97 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth"
1979,ASTM,"A325-79 Standard Specification for High-Strength Bolts For Structural Steel Joints"
2013,ASTM,"A325M-13 Standard Specification for  Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile   Strength (Metric)"
1979,ASTM,"A490-79 Standard Specification for Quenched And Tempered Alloy Steel Bolts For Structural Steel Joints"
2013,ASTM,"A574-13 Standard Specification for  Alloy Steel Socket-Head Cap Screws"
2010,ASTM,"A325-10e1 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum   Tensile Strength"
2013,ASTM,"F2329-13 Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon   and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded   Fasteners"
2013,ASTM,"F606M-13 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, and Rivets (Metric)"
2012,ASTM,"F680-80(2012) Standard Test Methods for  Nails"
2013,ASTM,"F788-13 Standard Specification for  Surface Discontinuities of Bolts, Screws, and Studs, Inch and  Metric Series"
2013,ASTM,"F959-13 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners"
2012,ASTM,"F1789-12a Standard Terminology for  F16 Mechanical Fasteners"
2012,ASTM,"F2430-04(2012) Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)"
2012,ASTM,"F2431-04(2012) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring"
2012,ASTM,"F2443-04(2012) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End"
2012,ASTM,"F2444-04(2012) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques"
2013,ASTM,"F2246-06(2013) Standard Specification for  Bearing, Roller, Needle: Thick Outer Ring With Rollers and  Cage"
2013,ASTM,"F467-13 Standard Specification for  Nonferrous Nuts for General Use"
2013,ASTM,"F467-13 Standard Specification for  Nonferrous Nuts for General Use (Redline)"
2013,ASTM,"F593-13 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
2013,ASTM,"F2329-13 Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon   and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded   Fasteners (Redline)"
2013,ASTM,"F2488-05(2013) Standard Terminology for  Rolling Element Bearings"
2013,ASTM,"F2511-05(2013) Standard Specification for  Rollers, Bearing, Needle, Ferrous, Solid"
2013,ASTM,"F2590-06(2013) Standard Specification for  Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid  or Flat Seat Type"
2006,ASTM,"F467M-06ae1 Standard Specification for  Nonferrous Nuts for General Use [Metric]"
2004,ASTM,"F568M-04 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners"
2002,ASTM,"F568M-02 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners"
1998,ASTM,"F568M-98 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners"
2001,ASTM,"F606M-01 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]"
1997,ASTM,"F788/F788M-97 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series"
1993,ASTM,"A502-93 Standard Specification for Steel Structural Rivets (Withdrawn 1999)"
2013,ASTM,"F432-13 Standard Specification for  Roof and Rock Bolts and Accessories"
2002,ASTM,"F1789-02 Standard Terminology of F16 Mechanical Fasteners"
2006,ASTM,"F2094-06 Standard Specification for Silicon Nitride Bearing Balls"
2013,ASTM,"F2730/F2730M-13 Standard Specification for  Silicon Nitride Cylindrical Bearing Rollers"
2006,ASTM,"F2094-06e1 Standard Specification for Silicon Nitride Bearing Balls"
2010,ASTM,"F1136-10 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners"
2004,ASTM,"F1136-04 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners"
1998,ASTM,"F1136-88(1998)e1 Standard Specification for Chromium/Zinc Corrosion Protective Coatings for Fasteners"
2013,ASTM,"F2094/F2094M-13 Standard Specification for  Silicon Nitride Bearing Balls"
2003,ASTM,"F2094-03a Standard Specification for Silicon Nitride Bearing Balls"
2003,ASTM,"F2094-03 Standard Specification for Silicon Nitride Bearing Balls"
2001,ASTM,"F2094-01a Standard Specification for Silicon Nitride Bearing Balls"
2001,ASTM,"F2094-01 Standard Specification for Silicon Nitride Bearing Balls"
2013,ASTM,"F2328M-07(2013) Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws and Studs (Metric)"
2013,ASTM,"F2332-06(2013) Standard Specification for  Annular Ball Bearings for Instruments and Precision Rotating  Components"
2013,ASTM,"F2591-06(2013) Standard Specification for  Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)"
1996,ASTM,"D3337-91(1996) Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings"
1999,ASTM,"F1135-99 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners"
2004,ASTM,"F1136M-04 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]"
2012,ASTM,"F2882M-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]"
2013,ASTM,"F837-13 Standard Specification for  Stainless Steel Socket Head Cap Screws"
2013,ASTM,"F606-13 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2013,ASTM,"F2660-13 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative  to Environmental Hydrogen Embrittlement"
2013,ASTM,"F835-13 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2013,ASTM,"F1667-13 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2013,ASTM,"F3042-13 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set  Screws"
2014,ASTM,"F1789-14 Standard Terminology for  F16 Mechanical Fasteners"
2014,ASTM,"F2094/F2094M-14 Standard Specification for  Silicon Nitride Bearing Balls"
2014,ASTM,"F2730/F2730M-14 Standard Specification for  Silicon Nitride Cylindrical Bearing Rollers"
2014,ASTM,"A31-14 Standard Specification for  Steel Rivets and Bars for Rivets, Pressure Vessels"
2014,ASTM,"A31-14 Standard Specification for  Steel Rivets and Bars for Rivets, Pressure Vessels (Redline)"
2014,ASTM,"F606M-14 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, and Rivets (Metric)"
2014,ASTM,"F606-14 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2014,ASTM,"F606-14 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Redline)"
2014,ASTM,"F606M-14 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, and Rivets (Metric) (Redline)"
2014,ASTM,"F2328M-14 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)"
2014,ASTM,"A325-14 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum   Tensile Strength"
2014,ASTM,"A325-14 Standard Specification for  Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum   Tensile Strength (Redline)"
2014,ASTM,"A325M-14 Standard Specification for  Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile   Strength (Metric)"
2014,ASTM,"A325M-14 Standard Specification for  Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile   Strength (Metric) (Redline)"
2014,ASTM,"F1852-14 Standard Specification for  “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength"
2014,ASTM,"F1852-14 Standard Specification for  “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Redline)"
2014,ASTM,"F2280-14 Standard Specification for  “Twist Off” Type Tension Control Structural Bolt/Nut/Washer     Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength"
2014,ASTM,"F2280-14 Standard Specification for  “Twist Off” Type Tension Control Structural Bolt/Nut/Washer     Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Redline)"
2014,ASTM,"A449-14 Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90   ksi Minimum Tensile Strength, General Use (Redline)"
2014,ASTM,"F3019/F3019M-14 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral  Lubricant, Corrosion Protective Coatings for Fasteners"
2014,ASTM,"F1940-07a(2014) Standard Test Method for  Process Control Verification to Prevent Hydrogen Embrittlement   in Plated or Coated Fasteners"
2014,ASTM,"F1789-14a Standard Terminology for  F16 Mechanical Fasteners"
2014,ASTM,"A490M-14 Standard Specification for  High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural    Steel Joints (Metric)"
2014,ASTM,"A490-14a Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum   Tensile Strength"
2014,ASTM,"A490-14a Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum   Tensile Strength (Redline)"
2014,ASTM,"A490M-14a Standard Specification for  High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural    Steel Joints (Metric)"
2014,ASTM,"F2328-14 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts"
2014,ASTM,"A307-14 Standard Specification for  Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile  Strength"
2014,ASTM,"A449-14 Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90   ksi Minimum Tensile Strength, General Use"
2014,ASTM,"A490-14 Standard Specification for  Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum   Tensile Strength"
2013,ASTM,"F468-13 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2014,ASTM,"F3043-14 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer  Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength"
2014,ASTM,"F3131-14 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages"
2014,ASTM,"F3043-14e1 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer  Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength"
2014,ASTM,"F3111-14 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel,  Heat Treated, 200 ksi Minimum Tensile Strength"
2015,ASTM,"F1789-15 Standard Terminology for  F16 Mechanical Fasteners"
2015,ASTM,"F1789-15a Standard Terminology for  F16 Mechanical Fasteners"
2015,ASTM,"A394-08(2015) Standard Specification for  Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2015,ASTM,"A563-15 Standard Specification for  Carbon and Alloy Steel Nuts"
2015,ASTM,"A563-15 Standard Specification for  Carbon and Alloy Steel Nuts (Redline)"
2015,ASTM,"F879-15 Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws"
2015,ASTM,"F2661-07(2015) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer"
2015,ASTM,"A502-03(2015) Standard Specification for  Rivets, Steel, Structural"
2015,ASTM,"F2482-08(2015) Standard Specification for  Load-Indicating Externally Threaded Fasteners"
2015,ASTM,"F2282-03(2015) Standard Specification for  Quality Assurance Requirements for Carbon and Alloy Steel Wire,   Rods, and Bars for Mechanical Fasteners"
2015,ASTM,"F3148-15 Standard Specification for High Strength Structural Bolt Assemblies, Steel and  Alloy  Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions"
2015,ASTM,"F2329/F2329M-15 Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon   and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded   Fasteners"
2015,ASTM,"F2329/F2329M-15 Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon   and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded   Fasteners (Redline)"
2015,ASTM,"F959-15 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners"
2015,ASTM,"F959-15 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners (Redline)"
2013,ASTM,"F2489-06(2013) Standard Guide for  Instrument and Precision Bearing Lubricants—Part 2 Greases"
2013,ASTM,"A563M-07(2013) Standard Specification for  Carbon and Alloy Steel Nuts (Metric)"
2013,ASTM,"F1575-03(2013) Standard Test Method for  Determining Bending Yield Moment of Nails"
2014,ASTM,"F2688-08(2014) Standard Guide for  System-Based, Customer-Centered Quality Plan for Manufacturers"
2013,ASTM,"F593-13a Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
2013,ASTM,"F844-07a(2013) Standard Specification for  Washers, Steel, Plain (Flat), Unhardened for General Use"
2013,ASTM,"F837-13e1 Standard Specification for  Stainless Steel Socket Head Cap Screws"
2013,ASTM,"F606M-13a Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)"
2014,ASTM,"F2328M-07(2014) Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws and Studs (Metric)"
2014,ASTM,"A563-07a(2014) Standard Specification for  Carbon and Alloy Steel Nuts"
2015,ASTM,"F1941/F1941M-15 Standard Specification for  Electrodeposited Coatings on Mechanical Fasteners, Inch and  Metric"
2015,ASTM,"F1667-15 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2015,ASTM,"F836M-02(2015) Standard Specification for  Style 1 Stainless Steel Metric Nuts (Metric)"
2015,ASTM,"F837M-02a(2015) Standard Specification for  Stainless Steel Socket Head Cap Screws [Metric]"
2015,ASTM,"F879M-02a(2015) Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws (Metric)"
2015,ASTM,"F880M-02(2015) Standard Specification for  Stainless Steel Socket Set Screws (Metric)"
2015,ASTM,"F594-09(2015) Standard Specification for  Stainless Steel Nuts"
2015,ASTM,"F1554-15 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2015,ASTM,"F2215-15 Standard Specification for  Balls, Bearings, Ferrous and Nonferrous for Use in Bearings,  Valves, and Bearing Applications"
2015,ASTM,"F2215-15 Standard Specification for  Balls, Bearings, Ferrous and Nonferrous for Use in Bearings,  Valves, and Bearing Applications (Redline)"
2015,ASTM,"F468-15 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2015,ASTM,"F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer  Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength"
2015,ASTM,"F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer  Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength (Redline)"
2015,ASTM,"F3125-15 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat  Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile  Strength, Inch and Metric Dimensions"
2015,ASTM,"F3125/F3125M-15a Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat  Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile  Strength, Inch and Metric Dimensions"
2015,ASTM,"F2282-15 Standard Specification for  Quality Assurance Requirements for Carbon and Alloy Steel Wire,   Rods, and Bars for Mechanical Fasteners"
2015,ASTM,"F1554-15e1 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2014,ASTM,"F2688-08(2014)e1 Standard Guide for  System-Based, Customer-Centered Quality Plan for Manufacturers"
2016,ASTM,"F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel,  Heat Treated, 200 ksi Minimum Tensile Strength"
2016,ASTM,"F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel,  Heat Treated, 200 ksi Minimum Tensile Strength (Redline)"
2016,ASTM,"F2162-01(2016) Standard Specification for  Bearing, Roller, Needle: Drawn Outer Ring, Full Complement,  Without Inner Ring, Open and Closed End, Standard Type"
2016,ASTM,"F2163-01(2016) Standard Specification for  Ring, Bearing, Inner: for Needle Roller Bearing With Drawn  Outer Ring"
2016,ASTM,"F836M-16 Standard Specification for  Style 1 Stainless Steel Metric Nuts (Metric)"
2016,ASTM,"F837M-16 Standard Specification for  Stainless Steel Socket Head Cap Screws [Metric]"
2016,ASTM,"F879M-16 Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws (Metric)"
2016,ASTM,"F879M-16 Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws (Metric) (Redline)"
2016,ASTM,"F880M-16 Standard Specification for  Stainless Steel Socket Set Screws (Metric)"
2016,ASTM,"F880M-16 Standard Specification for  Stainless Steel Socket Set Screws (Metric) (Redline)"
2013,ASTM,"F467-13e2 Standard Specification for  Nonferrous Nuts for General Use"
2014,ASTM,"F606/F606M-14a Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2013,ASTM,"F593-13ae1 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
2015,ASTM,"F468-15e1 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2016,ASTM,"F2832-11(2016) Standard Guide for  Accelerated Corrosion Testing for Mechanical Fasteners"
2016,ASTM,"F606/F606M-16 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2016,ASTM,"F468-16 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2016,ASTM,"F1789-16 Standard Terminology for  F16 Mechanical Fasteners"
2016,ASTM,"F436/F436M-16 Standard Specification for  Hardened Steel Washers Inch and Metric Dimensions"
2014,ASTM,"F2094/F2094M-14e1 Standard Specification for  Silicon Nitride Bearing Balls"
2016,ASTM,"A574-16 Standard Specification for  Alloy Steel Socket-Head Cap Screws"
2016,ASTM,"F1941/F1941M-16 Standard Specification for  Electrodeposited Coatings on Mechanical Fasteners, Inch and  Metric"
2016,ASTM,"F1941/F1941M-16 Standard Specification for  Electrodeposited Coatings on Mechanical Fasteners, Inch and  Metric (Redline)"
2016,ASTM,"F835-16 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2014,ASTM,"F2437-14 Standard Specification for  Carbon and Alloy Steel Compressible-Washer-Type Direct Tension  Indicators  for Use with Cap Screws, Bolts, Anchors, and Studs"
2017,ASTM,"F3148-17 Standard Specification for High Strength Structural Bolt Assemblies, Steel and  Alloy  Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions"
2017,ASTM,"F1667-17 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2017,ASTM,"F2437/F2437M-17 Standard Specification for  Carbon and Alloy Steel Compressible-Washer-Type Direct Tension  Indicators  for Use with Cap Screws, Bolts, Anchors, and Studs"
2017,ASTM,"F2437/F2437M-17 Standard Specification for  Carbon and Alloy Steel Compressible-Washer-Type Direct Tension  Indicators  for Use with Cap Screws, Bolts, Anchors, and Studs (Redline)"
2017,ASTM,"F1575-17 Standard Test Method for  Determining Bending Yield Moment of Nails"
2017,ASTM,"F1575-17 Standard Test Method for  Determining Bending Yield Moment of Nails (Redline)"
2014,ASTM,"A307-14e1 Standard Specification for  Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI  Tensile Strength"
2017,ASTM,"F959/F959M-17 Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners, Inch and Metric Series"
2017,ASTM,"F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and  Alloy  Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions"
2017,ASTM,"F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and  Alloy  Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions (Redline)"
2015,ASTM,"F1554-15e2 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2017,ASTM,"F912-11(2017) Standard Specification for  Alloy Steel Socket Set Screws"
2017,ASTM,"F680-17 Standard Test Methods for  Nails"
2017,ASTM,"F1789-17 Standard Terminology for  F16 Mechanical Fasteners"
2017,ASTM,"A574-17 Standard Specification for  Alloy Steel Socket-Head Cap Screws"
2017,ASTM,"F593-17 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
2017,ASTM,"A354-17 Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally   Threaded Fasteners"
2017,ASTM,"A354-17 Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally   Threaded Fasteners (Redline)"
2017,ASTM,"F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum  Tensile Strength (Inch and Metric)"
2017,ASTM,"F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum  Tensile Strength (Inch and Metric) (Redline)"
2017,ASTM,"F812-12(2017) Standard Specification for  Surface Discontinuities of Nuts, Inch and Metric Series"
2017,ASTM,"F2328-17 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts"
2017,ASTM,"F2328-17 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Redline)"
2017,ASTM,"F2328M-17 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)"
2017,ASTM,"F2328M-17 Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) (Redline)"
2017,ASTM,"F1789-17a Standard Terminology for  F16 Mechanical Fasteners"
2017,ASTM,"F547-17 Standard Terminology of  Nails for Use with Wood and Wood-Base Materials"
2017,ASTM,"A354-17e1 Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally   Threaded Fasteners"
2017,ASTM,"F880-12(2017) Standard Specification for  Stainless Steel Socket, Square Head, and Slotted Headless-Set  Screws"
2017,ASTM,"F901-01(2017) Standard Specification for  Aluminum Transmission Tower Bolts and Nuts"
2017,ASTM,"F1428-92(2017) Standard Specification for  Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat,   Corrosion Protective Coatings for Fasteners"
2017,ASTM,"F2281-04(2017) Standard Specification for  Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and   Studs, for Heat Resistance and High Temperature Applications"
2017,ASTM,"F2833-11(2017) Standard Specification for  Corrosion Protective Fastener Coatings with Zinc Rich Base   Coat and Aluminum Organic/Inorganic Type"
2018,ASTM,"A489-18e1 Standard Specification for  Carbon Steel Eyebolts"
2016,ASTM,"F836M-16e1 Standard Specification for  Style 1 Stainless Steel Metric Nuts (Metric)"
2017,ASTM,"F1554-17 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2017,ASTM,"F959/F959M-17a Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners, Inch and Metric Series"
2017,ASTM,"F1554-17e1 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2018,ASTM,"F1470-18 Standard Practice for  Fastener Sampling for Specified Mechanical Properties and Performance  Inspection"
2018,ASTM,"A489-18 Standard Specification for  Carbon Steel Eyebolts"
2018,ASTM,"F2094/F2094M-18 Standard Specification for  Silicon Nitride Bearing Balls"
2018,ASTM,"F2094/F2094M-18a Standard Specification for  Silicon Nitride Bearing Balls"
2018,ASTM,"F2094/F2094M-18a Standard Specification for  Silicon Nitride Bearing Balls (Redline)"
2018,ASTM,"F2730/F2730M-18 Standard Specification for  Silicon Nitride Cylindrical Bearing Rollers"
2018,ASTM,"F2730/F2730M-18a Standard Specification for  Silicon Nitride Cylindrical Bearing Rollers"
2018,ASTM,"F2730/F2730M-18a Standard Specification for  Silicon Nitride Cylindrical Bearing Rollers (Redline)"
2018,ASTM,"F1137/F1137M-18 Standard Specification for  Phosphate/Oil Corrosion Protective Coatings for Fasteners"
2018,ASTM,"F436/F436M-18 Standard Specification for  Hardened Steel Washers Inch and Metric Dimensions"
2018,ASTM,"F436/F436M-18a Standard Specification for  Hardened Steel Washers Inch and Metric Dimensions"
2018,ASTM,"F3042-13(2018) Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set  Screws"
2018,ASTM,"F467-13(2018) Standard Specification for  Nonferrous Nuts for General Use"
2018,ASTM,"F467M-06a(2018) Standard Specification for  Nonferrous Nuts for General Use (Metric)"
2018,ASTM,"F468M-06(2018) Standard Specification for  Nonferrous Bolts, Hex Cap Screws, and Studs for General Use   (Metric)"
2018,ASTM,"F788-13(2018) Standard Specification for  Surface Discontinuities of Bolts, Screws, and Studs, Inch and  Metric Series"
2018,ASTM,"F837-13(2018) Standard Specification for  Stainless Steel Socket Head Cap Screws"
2018,ASTM,"F1554-18 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2018,ASTM,"F1667-18 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2018,ASTM,"F2430-04(2018) Standard Specification for  Bearing, Roller, Needle: Assembly (Thick Outer Race)"
2018,ASTM,"F2431-04(2018) Standard Specification for  Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer   Ring"
2018,ASTM,"F2444-04(2018) Standard Practice for  Damage Prevention of Bearings, and Bearing Components Through   Proper Handling Techniques"
2017,ASTM,"A354-17e2 Standard Specification for  Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally   Threaded Fasteners"
2018,ASTM,"F1667-18a Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2018,ASTM,"F835-18 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2018,ASTM,"F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples"
2018,ASTM,"F3329-18 Standard Specification for Carbon and Alloy Steel Metric Rivets"
2018,ASTM,"F3125/F3125M-18 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2019,ASTM,"F1136/F1136M-11(2019) Standard Specification for  Zinc/Aluminum Corrosion Protective Coatings for Fasteners"
2018,ASTM,"F2282-18 Standard Specification for  Quality Assurance Requirements for Carbon and Alloy Steel Wire,   Rods, and Bars for Mechanical Fasteners"
2019,ASTM,"F1137/F1137M-19 Standard Specification for  Phosphate/Oil Corrosion Protective Coatings for Fasteners"
2019,ASTM,"F1137/F1137M-19 Standard Specification for  Phosphate/Oil Corrosion Protective Coatings for Fasteners (Redline)"
2019,ASTM,"F1470-19 Standard Practice for  Fastener Sampling for Specified Mechanical Properties and Performance  Inspection"
2019,ASTM,"F1940-07a(2019) Standard Test Method for  Process Control Verification to Prevent Hydrogen Embrittlement  in Plated or Coated Fasteners"
2019,ASTM,"F3125/F3125M-19 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2019,ASTM,"F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples"
2019,ASTM,"F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples (Redline)"
2019,ASTM,"F606/F606M-19 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2019,ASTM,"F436/F436M-19 Standard Specification for  Hardened Steel Washers Inch and Metric Dimensions"
2019,ASTM,"F436/F436M-19 Standard Specification for  Hardened Steel Washers Inch and Metric Dimensions (Redline)"
2019,ASTM,"F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral  Lubricant, Corrosion Protective Coatings for Fasteners"
2019,ASTM,"F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral  Lubricant, Corrosion Protective Coatings for Fasteners (Redline)"
2020,ASTM,"F3394/F3394M-20 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric  Dimensions<rangeref></rangeref  >"
2020,ASTM,"F594-09(2020) Standard Specification for  Stainless Steel Nuts"
2020,ASTM,"F879-15(2020) Standard Specification for  Stainless Steel Socket Button and Flat Countersunk Head Cap  Screws"
2020,ASTM,"F2660-20 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural  Bolts Relative to Environmental Hydrogen Embrittlement"
2020,ASTM,"F2660-20 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural  Bolts Relative to Environmental Hydrogen Embrittlement (Redline)"
2002,ASTM,"D3337-91(2002) Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings (Withdrawn 2009)"
2019,ASTM,"F432-19 Standard Specification for  Roof and Rock Bolts and Accessories"
2013,ASTM,"F467-13e1 Standard Specification for  Nonferrous Nuts for General Use"
2004,ASTM,"F1135-99(2004) Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners (Withdrawn 2009)"
2010,ASTM,"F1136M-10 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] (Withdrawn 2011)"
2017,ASTM,"F959/F959M-17a Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners, Inch and Metric Series (Redline)"
2019,ASTM,"F432-19 Standard Specification for  Roof and Rock Bolts and Accessories (Redline)"
2020,ASTM,"F837-20 Standard Specification for  Stainless Steel Socket Head Cap Screws"
2020,ASTM,"F837-20 Standard Specification for  Stainless Steel Socket Head Cap Screws (Redline)"
2020,ASTM,"F837M-20 Standard Specification for  Stainless Steel Socket Head Cap Screws [Metric]"
2020,ASTM,"F837M-20 Standard Specification for  Stainless Steel Socket Head Cap Screws [Metric] (Redline)"
2020,ASTM,"F901-20 Standard Specification for  Aluminum Transmission Tower Bolts and Nuts"
2020,ASTM,"F901-20 Standard Specification for  Aluminum Transmission Tower Bolts and Nuts (Redline)"
2020,ASTM,"F788-20 Standard Specification for  Surface Discontinuities of Bolts, Screws, Studs, and Rivets,  Inch and Metric Series"
2020,ASTM,"F788-20 Standard Specification for  Surface Discontinuities of Bolts, Screws, Studs, and Rivets,  Inch and Metric Series (Redline)"
2020,ASTM,"F836M-20 Standard Specification for  Style 1 Stainless Steel Metric Nuts (Metric)"
2020,ASTM,"F836M-20 Standard Specification for  Style 1 Stainless Steel Metric Nuts (Metric) (Redline)"
2020,ASTM,"F3393-20e1 Zinc-Flake Coating Systems for Fasteners"
2020,ASTM,"F835-20 Standard Specification for  Alloy Steel Socket Button and Flat Countersunk Head Cap Screws"
2019,ASTM,"F3125/F3125M-19e2 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2019,ASTM,"F3125/F3125M-19e1 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2020,ASTM,"F3393-20 Standard Specification for Zinc-Flake Coating Systems for Fasteners"
2019,ASTM,"F844-19 Standard Specification for  Washers, Steel, Plain (Flat), Unhardened for General Use"
2019,ASTM,"F844-19 Standard Specification for  Washers, Steel, Plain (Flat), Unhardened for General Use (Redline)"
2020,ASTM,"A31-14(2020) Standard Specification for  Steel Rivets and Bars for Rivets, Pressure Vessels"
2020,ASTM,"A449-14(2020) Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90   ksi Minimum Tensile Strength, General Use"
2020,ASTM,"F541-12(2020) Standard Specification for  Alloy Steel Eyebolts"
2020,ASTM,"F680-20 Standard Test Methods for  Nails"
2020,ASTM,"F680-20 Standard Test Methods for  Nails (Redline)"
2020,ASTM,"F1554-20 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength"
2020,ASTM,"F1554-20 Standard Specification for  Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength (Redline)"
2021,ASTM,"F2161-21 Standard Guide for  Instrument and Precision Bearing Lubricants—Part 1 Oils"
2021,ASTM,"F2443-04(2021) Standard Specification for  Roller, Bearing, Needle, Ferrous, Solid, Spherical End"
2021,ASTM,"F2953-12(2021) Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages"
2020,ASTM,"F1667-20 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2021,ASTM,"A307-21 Standard Specification for  Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI  Tensile Strength"
2021,ASTM,"A307-21 Standard Specification for  Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI  Tensile Strength (Redline)"
2021,ASTM,"F606/F606M-21 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets"
2021,ASTM,"F606/F606M-21 Standard Test Methods for  Determining the Mechanical Properties of Externally and Internally   Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Redline)"
2021,ASTM,"F1667-21 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2021,ASTM,"F1667-21 Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples (Redline)"
2021,ASTM,"A563/A563M-21a Standard Specification for  Carbon and Alloy Steel Nuts (Inch and Metric)"
2021,ASTM,"A563/A563M-21 Standard Specification for  Carbon and Alloy Steel Nuts (Inch and Metric)"
2017,ASTM,"F1789-17ae1 Standard Terminology for  F16 Mechanical Fasteners"
2021,ASTM,"F2832-11(2021) Standard Guide for  Accelerated Corrosion Testing for Mechanical Fasteners"
2021,ASTM,"F2482/F2482M-21 Standard Specification for  Load-Indicating Externally Threaded Fasteners"
2021,ASTM,"F2482/F2482M-21 Standard Specification for  Load-Indicating Externally Threaded Fasteners (Redline)"
2022,ASTM,"F2488-05(2022) Standard Terminology for  Rolling Element Bearings"
2022,ASTM,"F2511-05(2022) Standard Specification for  Rollers, Bearing, Needle, Ferrous, Solid"
2021,ASTM,"F1575/F1575M-21 Standard Test Method for  Determining Bending Yield Moment of Nails"
2022,ASTM,"F2590-06(2022) Standard Specification for  Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid  or Flat Seat Type"
2022,ASTM,"F2591-06(2022) Standard Specification for  Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)"
2021,ASTM,"F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples"
2021,ASTM,"F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples (Redline)"
2021,ASTM,"F3125/F3125M-21 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2021,ASTM,"F1667/F1667M-21a Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples"
2021,ASTM,"F1667/F1667M-21a Standard Specification for  Driven Fasteners: Nails, Spikes, and Staples (Redline)"
2021,ASTM,"A574-21 Standard Specification for  Alloy Steel Socket-Head Cap Screws"
2021,ASTM,"A574-21 Standard Specification for  Alloy Steel Socket-Head Cap Screws (Redline)"
2021,ASTM,"A563/A563M-21ae1 Standard Specification for  Carbon and Alloy Steel Nuts (Inch and Metric)"
2022,ASTM,"F547-22 Standard Terminology of  Nails for Use with Wood and Wood-Base Materials"
2022,ASTM,"F547-22 Standard Terminology of  Nails for Use with Wood and Wood-Base Materials (Redline)"
2022,ASTM,"F3125/F3125M-22 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2022,ASTM,"F2246-06(2022) Standard Specification for  Bearing, Roller, Needle: Thick Outer Ring With Rollers and  Cage"
2022,ASTM,"F2332-06(2022) Standard Specification for  Annular Ball Bearings for Instruments and Precision Rotating  Components"
2022,ASTM,"F2489-06(2022) Standard Guide for  Instrument and Precision Bearing Lubricants—Part 2 Greases"
2022,ASTM,"F2661-07(2022) Standard Test Method for  Determining the Tribological Behavior and the Relative Lifetime  of   a Fluid Lubricant using the Spiral Orbit Tribometer"
2022,ASTM,"F812-12(2022) Standard Specification for  Surface Discontinuities of Nuts, Inch and Metric Series"
2022,ASTM,"F1789-22 Standard Terminology for  F16 Mechanical Fasteners"
2022,ASTM,"F2328-17(2022) Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts"
2022,ASTM,"F2328M-17(2022) Standard Test Method for  Determining Decarburization and Carburization in Hardened and   Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)"
2022,ASTM,"F593-22 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs"
2022,ASTM,"F593-22 Standard Specification for  Stainless Steel Bolts, Hex Cap Screws, and Studs (Redline)"
2022,ASTM,"F594-22 Standard Specification for  Stainless Steel Nuts"
2022,ASTM,"F594-22 Standard Specification for  Stainless Steel Nuts (Redline)"
2023,ASTM,"F3131-14(2023) Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages"
2022,ASTM,"F468-22 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2023,ASTM,"F1428-23 Standard Specification for  Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat,   Corrosion Protective Coatings for Fasteners"
2023,ASTM,"F1428-23 Standard Specification for  Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat,   Corrosion Protective Coatings for Fasteners (Redline)"
2023,ASTM,"F835-23 Standard Specification for  Alloy Steel Socket Button, Low and Flat Countersunk Head Cap  Screws"
2023,ASTM,"F835-23 Standard Specification for  Alloy Steel Socket Button, Low and Flat Countersunk Head Cap  Screws (Redline)"
2023,ASTM,"F879-23 Standard Specification for  Stainless Steel Socket Button, Low and Flat Countersunk Head  Cap Screws"
2023,ASTM,"F879-23 Standard Specification for  Stainless Steel Socket Button, Low and Flat Countersunk Head  Cap Screws (Redline)"
2023,ASTM,"F468-23 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use"
2023,ASTM,"F468-23 Standard Specification for  Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and  Studs for General Use (Redline)"
2020,ASTM,"F788/F788M-20e1 Standard Specification for  Surface Discontinuities of Bolts, Screws, Studs, and Rivets,  Inch and Metric Series"
2022,ASTM,"F812/F812M-12(2022)e1 Standard Specification for  Surface Discontinuities of Nuts, Inch and Metric Series"
2023,ASTM,"F959/F959M-17a(2023) Standard Specification for  Compressible-Washer-Type Direct Tension Indicators for Use   with Structural Fasteners, Inch and Metric Series"
2023,ASTM,"F2329/F2329M-15(2023) Standard Specification for  Zinc Coating, Hot-Dip, Requirements for Application to Carbon   and Alloy  Steel Bolts, Screws, Washers, Nuts, and Special Threaded   Fasteners"
2023,ASTM,"F2437/F2437M-17(2023) Standard Specification for  Carbon and Alloy Steel Compressible-Washer-Type Direct Tension  Indicators  for Use with Cap Screws, Bolts, Anchors, and Studs"
2023,ASTM,"F2282-23 Standard Specification for  Quality Assurance Requirements for Carbon and Alloy Steel Wire,   Rods, and Bars for Mechanical Fasteners"
2023,ASTM,"F2282-23 Standard Specification for  Quality Assurance Requirements for Carbon and Alloy Steel Wire,   Rods, and Bars for Mechanical Fasteners (Redline)"
2023,ASTM,"F3125/F3125M-23 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength"
2023,ASTM,"F3125/F3125M-23 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy  Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile  Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile  Strength (Redline)"
2023,ASTM,"F1789-23 Standard Terminology for  F16 Mechanical Fasteners"
2023,ASTM,"F1789-23 Standard Terminology for  F16 Mechanical Fasteners (Redline)"
2023,ASTM,"F3394/F3394M-23 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric  Dimensions<rangeref></rangeref  >"
2023,ASTM,"F3394/F3394M-23 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric  Dimensions<rangeref></rangeref  > (Redline)"
2023,ASTM,"A563/A563M-23 Standard Specification for  Carbon and Alloy Steel Nuts (Inch and Metric)"
2023,ASTM,"A563/A563M-23 Standard Specification for  Carbon and Alloy Steel Nuts (Inch and Metric) (Redline)"
2024,ASTM,"A394-08(2024) Standard Specification for  Steel Transmission Tower Bolts, Zinc-Coated and Bare"
2024,ASTM,"F1470-24 Standard Practice for  Fastener Sampling for Specified Mechanical Properties and Performance  Inspection"
2024,ASTM,"F1470-24 Standard Practice for  Fastener Sampling for Specified Mechanical Properties and Performance  Inspection (Redline)"
2024,ASTM,"F1575/F1575M-24 Standard Test Method for  Determining Bending Yield Moment of Nails, Spikes, and Dowel-type  Threaded Fasteners"
2024,ASTM,"F1575/F1575M-24 Standard Test Method for  Determining Bending Yield Moment of Nails, Spikes, and Dowel-type  Threaded Fasteners (Redline)"
2024,ASTM,"A502-24 Standard Specification for  Rivets, Steel, Structural"
2024,ASTM,"A502-24 Standard Specification for  Rivets, Steel, Structural (Redline)"