2010,WILEY,"Architectural Graphic Standards for Residential Construction, 2nd Edition" 2010,WILEY,"Interior Graphic Standards, 2nd Edition" 2006,WILEY," Landscape Architectural Graphic Standards" 2006,WILEY,"Planning and Urban Design Standards" 2013,USGBC,"USGBC LEED v4 Reference Guide for Building Operations and Maintenance" 2013,USGBC,"USGBC LEED v4 Reference Guide for Interior Design and Construction" 2013,USGBC,"USGBC LEED v4 Reference Guide for Homes Design and Construction" 2013,USGBC,"USGBC LEED v4 Reference Guide for Building Design and Construction" 2015,ICC,"International Building Code" 2015,ICC,"International Residential Code" 2015,ICC,"International Fire Code" 2015,ICC,"International Plumbing Code" 2015,ICC,"International Mechanical Code" 2015,ICC,"International Fuel Gas Code" 2015,ICC,"International Energy Conservation Code" 2015,ICC,"International Existing Building Code, 2nd Edition" 2015,ICC,"International Zoning Code" 2015,ICC,"International Property Maintenance Code" 2015,ICC,"International Wildland-Urban Interface Code" 2015,ICC,"International Private Sewage Disposal Code" 2015,ICC,"ICC Performance Code for Buildings and Facilities" 2010,ASCE,"ASCE/SEI 7 Minimum Design Loads for Buildings and Other Structures, Third Printing" 2002,ASCE,"SEI/ASCE Standard 8 Specification for the Design of Cold-Formed Stainless Steel Structural Members" 1996,ASCE,"ASCE Standard 19 Structural Applications of Steel Cables for Buildings" 2014,ASCE,"ASCE Standard 24: Flood Resistant Design and Construction" 2005,ASCE,"ASCE/SEI/SFPE Standard 29 Standard Calculation Methods for Structural Fire Protection" 2001,ASCE,"SEI/ASCE Standard 32 Design and Construction of Frost-Protected Shallow Foundations" 2010,ASCE,"ASCE 55 Tensile Membrane Structures" 2013,ASCE,"ASCE Standard 41 - Seismic Evaluation and Retrofit of Existing Buildings" 2013,ASHRAE,"ANSI/ASHRAE Standard 62.1-2013 Ventilation for Acceptable Indoor Air Quality" 2011,ASHRAE,"ASHRAE Standard 140-2011 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs" 2011,ASHRAE,"ANSI/ASHRAE Standard 146-2011 Methods of Testing and Rating Pool Heaters" 2010,ASHRAE,"ANSI/ASHRAE Standard 193-2010 Method of Test for Determining the Airtightness of HVAC Equipment" 2013,ASHRAE,"ASHRAE Standard 15-2013 (packaged w/ Standard 34) Safety Standard for Refrigeration Systems and Designation and Classification of Refrigerants" 2008,ASHRAE,"ASHRAE Standard 170-2008 Ventilation of Health Care Facilities (ANSI/ASHRAE/ASHE Approved)" 2012,ASHRAE,"ASHRAE Standard 180-2012 Standard Practice for Inspection and Maintenance of Commercial Building HVAC Systems" 2013,ASHRAE,"2013 ASHRAE Handbook - Fundamentals - IP Edition" 2007,ASHRAE,"ASHRAE Standard 51-2007 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (AMCA Standard 210-99) (ANSI approved)" 2007,ASHRAE,"ASHRAE Standard 127-2007 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners (ANSI Approved)" 2007,ASHRAE,"ANSI/ASHRAE/ACCA Standard 183-2007 (RA 2011) Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings" 1998,ASHRAE,"ASHRAE Standard 13256-1:1998 Water-source Heat Pumps - Testing and Rating for Performance - Part 1:00 Water-to-air and Brine-to-air Heat Pumps (ANSI/ARI/ASHRAE ISO)" 1998,ASHRAE,"ASHRAE Standard 13256-2:1998 Water-source Heat Pumps - Testing and Rating for Performance - Part 2:00 Water-to-water and Brine-to-water Heat Pumps (ANSI/ARI/ASHRAE ISO)" 2013,ASHRAE,"ANSI/ASHRAE/IES Standard 90.1-2013 Energy Standard for Buildings Except Low-Rise Residential Buildings - (I-P Edition)" 2012,ASHRAE,"2012 ASHRAE Handbook HVAC Systems and Equipment - IP Edition" 2011,NFPA,"NFPA 2: Hydrogen Technologies Code" 2013,NFPA,"NFPA 105: Standard for Smoke Door Assemblies and Other Opening Protectives" 2013,NFPA,"NFPA 110: Standard for Emergency and Standby Power Systems" 2010,NFPA,"NFPA 11: Standard for Low-, Medium-, and High-Expansion Foam" 2013,NFPA,"NFPA 111: Standard on Stored Electrical Energy Emergency and Standby Power Systems" 2013,NFPA,"NFPA 1122: Code for Model Rocketry" 2014,NFPA,"NFPA 1123: Code for Fireworks Display" 2006,NFPA,"NFPA 1124: Code for the Manufacturing, Transportation, Storage and Retail Sale of Fireworks and Pyrotechnic Articles" 2012,NFPA,"NFPA 1125: Code for the Manufacture of Model Rocket and High Power Rocket Motors" 2011,NFPA,"NFPA 1126: Standard for the Use of Pyrotechnics Before a Proximate Audience" 2013,NFPA,"NFPA 1127: Code for High Power Rocketry" 2011,NFPA,"NFPA 12: Standard on Carbon Dioxide Extinguishing Systems" 2009,NFPA,"NFPA 12A: Standard on Halon 1301 Fire Extinguishing Systems" 2013,NFPA,"NFPA 13: Standard for the Installation of Sprinkler System" 2013,NFPA,"NFPA 13D: Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes," 2013,NFPA,"NFPA 13R: Standard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies," 2012,NFPA,"NFPA 15: Standard for Water Spray Fixed Systems for Fire Protection" 2011,NFPA,"NFPA 160: Standard for the Use of Flame Effects Before an Audience" 2013,NFPA,"NFPA 20: Standard for the Installation of Stationary Pumps for Fire Protection" 2013,NFPA,"NFPA 24: Standard for the Installation of Private Fire Service Mains and Their Appurtenances" 2014,NFPA,"NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems" 2012,NFPA,"NFPA 252: Standard Methods of Fire Tests of Door Assemblies" 2012,NFPA,"NFPA 257: Standard on Fire Test for Window and Glass Block Assemblies" 2011,NFPA,"NFPA 265: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls" 2012,NFPA,"NFPA 268: Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source" 2011,NFPA,"NFPA 276: Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Desk Roofing Components" 2012,NFPA,"NFPA 285: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components" 2012,NFPA,"NFPA 288: Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies" 2012,NFPA,"NFPA 30: Flammable and Combustible Liquids Code" 2011,NFPA,"NFPA 303: Fire Protection Standard for Marinas and Boatyards" 2011,NFPA,"NFPA 31: Standard for the Installation of Oil-Burning Equipment" 2011,NFPA,"NFPA 32: Standard for Drycleaning Plants" 2010,NFPA,"NFPA 326: Standard for Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair" 2011,NFPA,"NFPA 35: Standard for the Manufacture of Organic Coatings" 2012,NFPA,"NFPA 385: Standard for Tank Vehicles for Flammable and Combustible Liquids" 2013,NFPA,"NFPA 400: Hazardous Materials Code" 2011,NFPA,"NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film" 2012,NFPA,"NFPA 407: Standard for Aircraft Fuel Servicing" 2011,NFPA,"NFPA 409: Standard on Aircraft Hangars" 2010,NFPA,"NFPA 410: Standard on Aircraft Maintenance" 2011,NFPA,"NFPA 418: Standard for Heliports" 2012,NFPA,"NFPA 497: Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas" 2013,NFPA,"NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes" 2012,NFPA,"NFPA 51A: Standard for Acetylene Cylinder Charging Plants" 2013,NFPA,"NFPA 52: Vehicular Gaseous Fuel Systems Code" 2012,NFPA,"NFPA 550: Guide to the Fire Safety Concepts Tree" 2013,NFPA,"NFPA 55: Compressed Gases and Cryogenic Fluids Code" 2012,NFPA,"NFPA 557: Standard for Determination of Fire Loads for Use in Structural Fire Protection Design" 2012,NFPA,"NFPA 56 (PS): Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems" 2014,NFPA,"NFPA 58: Liquefied Petroleum Gas Code" 2013,NFPA,"NFPA 1961: Standard on Fire Hose" 2013,NFPA,"NFPA 61: Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities" 2013,NFPA,"NFPA 654: Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids" 2012,NFPA,"NFPA 655: Standard for Prevention of Sulfur Fires and Explosions" 2012,NFPA,"NFPA 664: Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities" 2014,NFPA,"NFPA 69: Standard on Explosion Prevention Systems" 2010,NFPA,"NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films" 2014,NFPA,"NFPA 70: National Electrical Code (NEC)" 2012,NFPA,"NFPA 704: Standard System for the Identification of the Hazards of Materials for Emergency Response" 2013,NFPA,"NFPA 72: National Fire Alarm and Signaling Code" 2013,NFPA,"NFPA 80: Standard for Fire Doors and Other Opening Protectives" 2014,NFPA,"NFPA 82: Standard on Incinerators and Waste and Linen Handling Systems and Equipment" 2011,NFPA,"NFPA 85: Boiler and Combustion Systems Hazards Code" 2010,NFPA,"NFPA 914: Code for Fire Protection of Historic Structures" 2014,NFPA,"NFPA 96: Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations" 2015,NFPA,"NFPA 101┬«: Life Safety Code┬«" 2013,NFPA,"NFPA 10: Standard for Portable Fire Extinguishers" 2013,NFPA,"NFPA 14: Standard for the Installation of Standpipe and Hose Systems" 2013,NFPA,"NFPA 17: Standard for Dry Chemical Extinguishing Systems" 2013,NFPA,"NFPA 17A: Standard for Wet Chemical Extinguishing Systems" 2013,NFPA,"NFPA 211: Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances" 2015,NFPA,"NFPA 221: Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls" 2013,NFPA,"NFPA 22: Standard for Water Tanks for Private Fire Protection" 2013,NFPA,"NFPA 241: Standard for Safeguarding Construction, Alteration, and Demolition Operations" 2013,NFPA,"NFPA 259: Standard Test Method for Potential Heat of Building Materials" 2013,NFPA,"NFPA 260: Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture" 2013,NFPA,"NFPA 261: Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes" 2013,NFPA,"NFPA 289: Standard Method of Fire Test for Individual Fuel Packages" 2015,NFPA,"NFPA 30A: Code for Motor Fuel Dispensing Facilities and Repair Garages" 2015,NFPA,"NFPA 30B: Code for the Manufacture and Storage of Aerosol Products" 2015,NFPA,"NFPA 318: Standard for the Protection of Semiconductor Fabrication Facilities" 2015,NFPA,"NFPA 484: Standard for Combustible Metals" 2013,NFPA,"NFPA 495: Explosive Materials Code" 2013,NFPA,"NFPA 498: Standard for Safe Havens and Interchange Lots for Vehicles Transporting Explosives" 2013,NFPA,"NFPA 501: Standard on Manufactured Housing" 2013,NFPA,"NFPA 505: Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations" 2015,NFPA,"NFPA 703: Standard for Fire Retardant--Treated Wood and Fire-Retardant Coatings for Building Materials" 2015,NFPA,"NFPA 720: Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment" 2015,NFPA,"NFPA 853: Standard for the Installation of Stationary Fuel Cell Power Systems" 2015,NFPA,"NFPA 86: Standard for Ovens and Furnaces" 2015,NFPA,"NFPA 88A: Standard for Parking Structures" 2015,NFPA,"NFPA 99: Health Care Facilities Code" 2010,NFPA,"NFPA 120: Standard for Fire Prevention and Control in Coal Mines" 2011,NFPA,"NFPA 16: Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems" 2012,NFPA,"NFPA 170: Standard for Fire Safety Symbols" 2012,NFPA,"NFPA 2001: Standard on Clean Agent Fire Extinguishing Systems" 2012,NFPA,"NFPA 204: Standard for Smoke and Heat Venting" 2011,NFPA,"NFPA 253: Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source" 2011,NFPA,"NFPA 262: Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces" 2009,NFPA,"NFPA 275: Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic Insulation" 2011,NFPA,"NFPA 286: Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth" 2011,NFPA,"NFPA 33: Standard for Spray Application Using Flammable or Combustible Materials" 2011,NFPA,"NFPA 34: Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids" 2015,NFPA,"NFPA 37: Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines" 2011,NFPA,"NFPA 45: Standard on Fire Protection for Laboratories Using Chemicals" 2015,NFPA,"NFPA 750: Standard on Water Mist Fire Protection Systems" 2010,NFPA,"NFPA 91: Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids" 2012,NFPA,"NFPA 92: Standard for Smoke Control Systems" 2013,ASTM,"A1003/A1003M-13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members" 2011,ASTM,"A106/A106M-11 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service" 2009,ASTM,"A153/A153M-09 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware" 2011,ASTM,"A234/A234M-11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service" 2013,ASTM,"A240/A240M-13a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications" 2010,ASTM,"A252-10 Standard Specification for Welded and Seamless Steel Pipe Piles" 2007,ASTM,"A254-97(2007) Standard Specification for Copper-Brazed Steel Tubing" 2012,ASTM,"A283/A283M-12a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates" 2012,ASTM,"A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength" 2013,ASTM,"A312/A312M-13a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes" 2008,ASTM,"A36/A36M-08 Standard Specification for Carbon Structural Steel" 2009,ASTM,"A395/A395M-99(2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures" 2012,ASTM,"A416/A416M-12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete" 2010,ASTM,"A420/A420M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service" 2010,ASTM,"A463/A463M-10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process" 2012,ASTM,"A53/A53M-12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless" 2009,ASTM,"A536-84(2009) Standard Specification for Ductile Iron Castings" 2012,ASTM,"A572/A572M-12a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel" 2010,ASTM,"A588/A588M-10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance" 2011,ASTM,"A6/A6M-11 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling" 2012,ASTM,"A615/A615M-12 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement " 2009,ASTM,"A641/A641M-09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire" 2011,ASTM,"A653/A653M-11 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process" 2012,ASTM,"A690/A690M-07(2012) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments " 2009,ASTM,"A706/A706M-09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement" 2012,ASTM,"A722/A722M-12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete" 2013,ASTM,"A74-13a Standard Specification for Cast Iron Soil Pipe and Fittings" 2010,ASTM,"A792/A792M-10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process" 2013,ASTM,"A875/A875M-13 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process" 2013,ASTM,"A888-13a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications" 2013,ASTM,"A924/A924M-13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process" 2012,ASTM,"B101-12 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction " 2010,ASTM,"B135-10 Standard Specification for Seamless Brass Tube" 2013,ASTM,"B152/B152M-13 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar" 2010,ASTM,"B209-10 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate" 2012,ASTM,"B210-12 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes" 2010,ASTM,"B227-10 Standard Specification for Hard-Drawn Copper-Clad Steel Wire" 2012,ASTM,"B241/B241M-12e1 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube" 2010,ASTM,"B251-10 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube" 2008,ASTM,"B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service" 2012,ASTM,"B302-12 Standard Specification for Threadless Copper Pipe, Standard Sizes" 2009,ASTM,"B306-09 Standard Specification for Copper Drainage Tube (DWV)" 2008,ASTM,"B32-08 Standard Specification for Solder Metal" 2012,ASTM,"B370-12 Standard Specification for Copper Sheet and Strip for Building Construction" 2010,ASTM,"B42-10 Standard Specification for Seamless Copper Pipe, Standard Sizes" 2009,ASTM,"B43-09 Standard Specification for Seamless Red Brass Pipe, Standard Sizes" 2012,ASTM,"B447-12a Standard Specification for Welded Copper Tube" 2011,ASTM,"B687-99(2011) Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples" 2009,ASTM,"B695-04(2009) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel" 2010,ASTM,"B813-10 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube" 2010,ASTM,"B828-02(2010) Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings" 2009,ASTM,"B88-09 Standard Specification for Seamless Copper Water Tube" 2007,ASTM,"C1002-07 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs" 2011,ASTM,"C1007-11a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories" 2013,ASTM,"C1029-13 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation" 2011,ASTM,"C1032-06(2011) Standard Specification for Woven Wire Plaster Base" 2010,ASTM,"C1047-10a Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base" 2010,ASTM,"C1053-00(2010) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications" 2013,ASTM,"C1088-13 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale" 2013,ASTM,"C1107/C1107M-13 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)" 2011,ASTM,"C1157/C1157M-11 Standard Performance Specification for Hydraulic Cement" 2011,ASTM,"C1167-11 Standard Specification for Clay Roof Tiles" 2010,ASTM,"C1173-10e1 Standard Specification for Flexible Transition Couplings for Underground Piping Systems" 2008,ASTM,"C1177/C1177M-08 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing" 2011,ASTM,"C1178/C1178M-11 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel" 2012,ASTM,"C1186-08(2012) Standard Specification for Flat Fiber-Cement Sheets" 2010,ASTM,"C1261-10 Standard Specification for Firebox Brick for Residential Fireplaces" 2013,ASTM,"C126-13 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units" 2012,ASTM,"C1277-12 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings" 2011,ASTM,"C1278/C1278M-07a(2011) Standard Specification for Fiber-Reinforced Gypsum Panel" 2013,ASTM,"C1280-13 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing" 2011,ASTM,"C1283-11 Standard Practice for Installing Clay Flue Lining" 2010,ASTM,"C1288-99(2010) Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets" 2013,ASTM,"C1289-13e1 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board" 2011,ASTM,"C129-11 Standard Specification for Nonloadbearing Concrete Masonry Units" 2012,ASTM,"C1313/C1313M-12 Standard Specification for Sheet Radiant Barriers for Building Construction Applications " 2008,ASTM,"C1325-08b Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units" 2012,ASTM,"C1328/C1328M-12 Standard Specification for Plastic (Stucco) Cement" 2011,ASTM,"C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus" 2010,ASTM,"C1364-10b Standard Specification for Architectural Cast Stone" 2010,ASTM,"C1371-04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers" 2013,ASTM,"C140-13 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units" 2012,ASTM,"C1405-12 Standard Specification for Glazed Brick (Single Fired, Brick Units)" 2011,ASTM,"C14-11 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe" 2012,ASTM,"C143/C143M-12 Standard Test Method for Slump of Hydraulic-Cement Concrete" 2008,ASTM,"C1440-08 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems" 2013,ASTM,"C1445-13 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table" 2008,ASTM,"C1460-08 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground" 2008,ASTM,"C1461-08 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use" 2009,ASTM,"C1492-03(2009) Standard Specification for Concrete Roof Tile" 2011,ASTM,"C1540-11 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings" 2009,ASTM,"C1549-09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer" 2011,ASTM,"C1600/C1600M-11 Standard Specification for Rapid Hardening Hydraulic Cement" 2011,ASTM,"C1629/C1629M-06(2011) Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels" 2011,ASTM,"C1634-11 Standard Specification for Concrete Facing Brick" 2012,ASTM,"C1658/C1658M-12 Standard Specification for Glass Mat Gypsum Panels" 2012,ASTM,"C1668-12 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems" 2010,ASTM,"C172/C172M-10 Standard Practice for Sampling Freshly Mixed Concrete" 2011,ASTM,"C199-84(2011) Standard Test Method for Pier Test for Refractory Mortars (Redline)" 2012,ASTM,"C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation " 2011,ASTM,"C207-06(2011) Standard Specification for Hydrated Lime for Masonry Purposes" 2012,ASTM,"C208-12 Standard Specification for Cellulosic Fiber Insulating Board" 2010,ASTM,"C212-10 Standard Specification for Structural Clay Facing Tile" 2013,ASTM,"C216-13 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)" 2010,ASTM,"C22/C22M-00(2010) Standard Specification for Gypsum" 2012,ASTM,"C270-12a Standard Specification for Mortar for Unit Masonry" 2012,ASTM,"C272/C272M-12 Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions" 2011,ASTM,"C273/C273M-11 Standard Test Method for Shear Properties of Sandwich Core Materials" 2008,ASTM,"C27-98(2008) Standard Classification of Fireclay and High-Alumina Refractory Brick" 2010,ASTM,"C28/C28M-10 Standard Specification for Gypsum Plasters" 2012,ASTM,"C31/C31M-12 Standard Practice for Making and Curing Concrete Test Specimens in the Field" 2011,ASTM,"C315-07(2011) Standard Specification for Clay Flue Liners and Chimney Pots" 2010,ASTM,"C317/C317M-00(2010) Standard Specification for Gypsum Concrete" 2013,ASTM,"C33/C33M-13 Standard Specification for Concrete Aggregates" 2012,ASTM,"C34-12 Standard Specification for Structural Clay Load-Bearing Wall Tile" 2009,ASTM,"C4-04(2009) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile" 2011,ASTM,"C411-11 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation" 2009,ASTM,"C425-04(2009) Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings" 2012,ASTM,"C443-12 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets" 2009,ASTM,"C472-99(2009) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete" 2012,ASTM,"C473-12 Standard Test Methods for Physical Testing of Gypsum Panel Products" 2013,ASTM,"C474-13 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction" 2012,ASTM,"C475/C475M-12 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board " 2010,ASTM,"C476-10 Standard Specification for Grout for Masonry" 2010,ASTM,"C5-10 Standard Specification for Quicklime for Structural Purposes" 2009,ASTM,"C514-04(2009)e1 Standard Specification for Nails for the Application of Gypsum Board" 2008,ASTM,"C516-08 Standard Specification for Vermiculite Loose Fill Thermal Insulation" 2012,ASTM,"C547-12 Standard Specification for Mineral Fiber Pipe Insulation " 2012,ASTM,"C549-06(2012) Standard Specification for Perlite Loose Fill Insulation " 2012,ASTM,"C552-12b Standard Specification for Cellular Glass Thermal Insulation" 2012,ASTM,"C56-12 Standard Specification for Structural Clay Nonloadbearing Tile" 2012,ASTM,"C564-12 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings" 2012,ASTM,"C578-12b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation" 2009,ASTM,"C587-04(2009) Standard Specification for Gypsum Veneer Plaster" 2011,ASTM,"C59/C59M-00(2011) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster" 2013,ASTM,"C595/C595M-13 Standard Specification for Blended Hydraulic Cements" 2011,ASTM,"C61/C61M-00(2011) Standard Specification for Gypsum Keene's Cement" 2011,ASTM,"C615/C615M-11 Standard Specification for Granite Dimension Stone" 2013,ASTM,"C62-13 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)" 2009,ASTM,"C631-09 Standard Specification for Bonding Compounds for Interior Gypsum Plastering" 2013,ASTM,"C635/C635M-13 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings" 2008,ASTM,"C636/C636M-08 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels" 2013,ASTM,"C645-13 Standard Specification for Nonstructural Steel Framing Members" 2013,ASTM,"C652-13 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)" 2013,ASTM,"C67-13 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile" 2011,ASTM,"C685/C685M-11 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing" 2013,ASTM,"C700-13 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated" 2012,ASTM,"C726-12 Standard Specification for Mineral Wool Roof Insulation Board" 2010,ASTM,"C73-10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)" 2011,ASTM,"C744-11 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units" 2011,ASTM,"C754-11 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products" 2013,ASTM,"C76-13a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2012,ASTM,"C836/C836M-12 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course" 2011,ASTM,"C840-11 Standard Specification for Application and Finishing of Gypsum Board" 2008,ASTM,"C841-03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring" 2010,ASTM,"C842-05(2010)e1 Standard Specification for Application of Interior Gypsum Plaster" 2012,ASTM,"C843-99(2012) Standard Specification for Application of Gypsum Veneer Plaster" 2010,ASTM,"C844-04(2010) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster" 2012,ASTM,"C847-12 Standard Specification for Metal Lath" 2010,ASTM,"C887-05(2010) Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar" 2009,ASTM,"C897-05(2009) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters" 2013,ASTM,"C90-13 Standard Specification for Loadbearing Concrete Masonry Units" 2008,ASTM,"C913-08 Standard Specification for Precast Concrete Water and Wastewater Structures" 2011,ASTM,"C920-11 Standard Specification for Elastomeric Joint Sealants" 2013,ASTM,"C926-13 Standard Specification for Application of Portland Cement-Based Plaster" 2013,ASTM,"C932-06(2013) Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering" 2013,ASTM,"C933-13 Standard Specification for Welded Wire Lath" 2013,ASTM,"C94/C94M-13 Standard Specification for Ready-Mixed Concrete" 2010,ASTM,"C946-10 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls" 2011,ASTM,"C954-11 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness" 2011,ASTM,"C955-11c Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases" 2010,ASTM,"C956-04(2010) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete" 2011,ASTM,"D1003-11e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics" 2007,ASTM,"D1143/D1143M-07e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load" 2007,ASTM,"D1227-95(2007) Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing" 2012,ASTM,"D1248-12 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable" 2008,ASTM,"D1253-08 Standard Test Method for Residual Chlorine in Water" 2012,ASTM,"D1557-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))" 2009,ASTM,"D1593-09 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting" 2010,ASTM,"D1621-10 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics" 2008,ASTM,"D1622-08 Standard Test Method for Apparent Density of Rigid Cellular Plastics" 2009,ASTM,"D1623-09 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics" 2013,ASTM,"D1693-13 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics" 2011,ASTM,"D1784-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds" 2012,ASTM,"D1785-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 " 2011,ASTM,"D1863/D1863M-05(2011)e1 Standard Specification for Mineral Aggregate Used on Built-Up Roofs" 2010,ASTM,"D1869-95(2010) Standard Specification for Rubber Rings for Asbestos-Cement Pipe" 2012,ASTM,"D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics" 2009,ASTM,"D2126-09 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging" 2011,ASTM,"D2235-04(2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings" 2012,ASTM,"D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter" 2009,ASTM,"D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)" 2009,ASTM,"D226/D226M-09 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing" 2011,ASTM,"D227/D227M-03(2011)e1 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing" 2011,ASTM,"D2412-11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading" 2006,ASTM,"D2464-06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80" 2013,ASTM,"D2464-13 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80" 2006,ASTM,"D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40" 2006,ASTM,"D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80" 2012,ASTM,"D25-12 Standard Specification for Round Timber Piles " 2012,ASTM,"D2559-12a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions " 2012,ASTM,"D2564-12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems" 2008,ASTM,"D2609-02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe" 2007,ASTM,"D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings" 2011,ASTM,"D2661-11 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings" 2012,ASTM,"D2665-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings " 2009,ASTM,"D2672-96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement" 2010,ASTM,"D2683-10e1 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing" 2011,ASTM,"D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings" 2012,ASTM,"D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing" 2010,ASTM,"D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics" 2009,ASTM,"D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems" 2010,ASTM,"D2855-96(2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings" 2011,ASTM,"D2859-06(2011) Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials" 2010,ASTM,"D2898-10 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing" 2010,ASTM,"D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings" 2007,ASTM,"D2996-01(2007)e1 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe" 2008,ASTM,"D3019-08 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered" 2008,ASTM,"D3034-08 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings" 2006,ASTM,"D312-00(2006) Standard Specification for Asphalt Used in Roofing" 2011,ASTM,"D3139-98(2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals" 2013,ASTM,"D3161/D3161M-13 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)" 2012,ASTM,"D3200-74(2012) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles " 2007,ASTM,"D3212-07 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals" 2008,ASTM,"D323-08 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)" 2012,ASTM,"D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing" 2011,ASTM,"D3278-96(2011) Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus" 2011,ASTM,"D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns" 2010,ASTM,"D3462/D3462M-10a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules" 2006,ASTM,"D3468-99(2006)e1 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing" 2011,ASTM,"D3679-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding" 2008,ASTM,"D3746-85(2008) Standard Test Method for Impact Resistance of Bituminous Roofing Systems" 2012,ASTM,"D3909/D3909M-97b(2012)e1 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules" 2009,ASTM,"D3957-09 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings" 2009,ASTM,"D4068-09 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane" 2005,ASTM,"D41-05 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing" 2007,ASTM,"D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils" 2009,ASTM,"D4272-09 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop" 2006,ASTM,"D43-00(2006) Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing" 2010,ASTM,"D4318-10 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils" 2012,ASTM,"D4434/D4434M-12 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing" 2008,ASTM,"D448-08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction" 2008,ASTM,"D449-03(2008) Standard Specification for Asphalt Used in Dampproofing and Waterproofing" 2007,ASTM,"D450-07 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing" 2012,ASTM,"D4551-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane" 2012,ASTM,"D4601/D4601M-04(2012)e1 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing" 2013,ASTM,"D4637/D4637M-13 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane" 2011,ASTM,"D4829-11 Standard Test Method for Expansion Index of Soils" 2009,ASTM,"D4897/D4897M-01(2009) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing" 2012,ASTM,"D4945-12 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations" 2005,ASTM,"D4990-97a(2005)e1 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing" 2013,ASTM,"D5055-13 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists" 2013,ASTM,"D5456-13 Standard Specification for Evaluation of Structural Composite Lumber Products" 2009,ASTM,"D5516-09 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2010,ASTM,"D56-05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester" 2010,ASTM,"D5664-10 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2006,ASTM,"D5665-99a(2006) Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing" 2005,ASTM,"D5726-98(2005) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing" 2008,ASTM,"D6163-00(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2011,ASTM,"D6164/D6164M-11 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements" 2011,ASTM,"D6222/D6222M-11 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements" 2009,ASTM,"D6223/D6223M-02(2009)e1 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2005,ASTM,"D6298-05e1 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface" 2008,ASTM,"D6305-08 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 2010,ASTM,"D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2009,ASTM,"D6380-03(2009) Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2009,ASTM,"D6509/D6509M-09 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements" 2013,ASTM,"D6662-13 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2008,ASTM,"D6694-08 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems" 2008,ASTM,"D6841-08 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2011,ASTM,"D6878/D6878M-11a Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing" 2007,ASTM,"D6947-07 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2010,ASTM,"D7032-10a Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2005,ASTM,"D7147-05 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers" 2011,ASTM,"D7158/D7158M-11 Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)" 2007,ASTM,"D7254-07 Standard Specification for Polypropylene (PP) Siding" 2011,ASTM,"D7425/D7425M-11 Standard Specification for Spray Polyurethane Foam Used for Roofing Applications" 2013,ASTM,"D7793-13 Standard Specification for Insulated Vinyl Siding" 2012,ASTM,"D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2012,ASTM,"D93-12 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2011,ASTM,"E108-11 Standard Test Methods for Fire Tests of Roof Coverings" 2012,ASTM,"E1300-12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings" 2013,ASTM,"E1354-13 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2012,ASTM,"E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type" 2013,ASTM,"E1529-13 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2013,ASTM,"E1537-13 Standard Test Method for Fire Testing of Upholstered Furniture" 2013,ASTM,"E1590-13 Standard Test Method for Fire Testing of Mattresses" 2012,ASTM,"E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 2010,ASTM,"E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 2011,ASTM,"E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls" 2011,ASTM,"E1827-11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 2005,ASTM,"E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2006,ASTM,"E1918-06 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field" 2011,ASTM,"E1980-11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces" 2010,ASTM,"E2072-10 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings" 2010,ASTM,"E2174-10ae1 Standard Practice for On-Site Inspection of Installed Fire Stops" 2013,ASTM,"E2178-13 Standard Test Method for Air Permeance of Building Materials" 2009,ASTM,"E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2011,ASTM,"E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies" 2013,ASTM,"E2336-04(2013) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2011,ASTM,"E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies" 2010,ASTM,"E2393-10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2011,ASTM,"E2397-11 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems" 2009,ASTM,"E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems" 2007,ASTM,"E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage" 2012,ASTM,"E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics" 2011,ASTM,"E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2011,ASTM,"E2634-11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2010,ASTM,"E2727-10 Standard Practice for Assessment of Rainwater Quality" 2011,ASTM,"E2751-11 Standard Practice for Design and Performance of Supported Glass Walkways" 2004,ASTM,"E283-04 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2002,ASTM,"E330-02 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" 2009,ASTM,"E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference" 2008,ASTM,"E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques" 2009,ASTM,"E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine" 2011,ASTM,"E605-93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2011,ASTM,"E736-00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members" 2010,ASTM,"E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 2013,ASTM,"E84-13a Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements" 2013,ASTM,"F1055-13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing" 2010,ASTM,"F1085-10 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels" 2011,ASTM,"F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2010,ASTM,"F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2010,ASTM,"F1346-91(2010) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs" 2009,ASTM,"F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2007,ASTM,"F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications" 2009,ASTM,"F1488-09e1 Standard Specification for Coextruded Composite Pipe" 2012,ASTM,"F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) " 2006,ASTM,"F1548-01(2006) Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications" 2007,ASTM,"F1554-07a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2011,ASTM,"F1667-11ae1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples " 2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 2013,ASTM,"F1807-13 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2007,ASTM,"F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 2012,ASTM,"F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2012,ASTM,"F1960-12 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2012,ASTM,"F1970-12 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 2008,ASTM,"F1973-08 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 2009,ASTM,"F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2011,ASTM,"F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems" 2010,ASTM,"F2006-10 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2012,ASTM,"F2080-12 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2010,ASTM,"F2090-10 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2008,ASTM,"F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings" 2011,ASTM,"F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2013,ASTM,"F2200-13 Standard Specification for Automated Vehicular Gate Construction" 2013,ASTM,"F2306/F2306M-13 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications" 2010,ASTM,"F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2009,ASTM,"F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2008,ASTM,"F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing" 2009,ASTM,"F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2010,ASTM,"F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems" 2010,ASTM,"F2806-10 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)" 2011,ASTM,"F2831-11 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems" 2011,ASTM,"F2855-11 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing" 2012,ASTM,"F2855-12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing" 2012,ASTM,"F2969-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe" 2005,ASTM,"F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings" 2012,ASTM,"F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings" 2009,ASTM,"F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2009,ASTM,"F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2012,ASTM,"F439-12 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2013,ASTM,"F441/F441M-13 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80" 2013,ASTM,"F442/F442M-13 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)" 2010,ASTM,"F477-10 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2010,ASTM,"F493-10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings" 2008,ASTM,"F628-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2010,ASTM,"F656-10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 2013,ASTM,"F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter" 2013,ASTM,"F876-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2011,ASTM,"F877-11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems" 2010,ASTM,"F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2006,ASTM,"G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2006,ASTM,"G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2005,ASTM,"G155-05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2011,ASTM,"A755/A755M-11 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products" 2009,ASTM,"A996/A996M-09b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement" 2013,ASTM,"C1513-13 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections" 2009,ASTM,"C330/C330M-09 Standard Specification for Lightweight Aggregates for Structural Concrete" 2010,ASTM,"C331/C331M-10 Standard Specification for Lightweight Aggregates for Concrete Masonry Units" 2010,ASTM,"C406/C406M-10 Standard Specification for Roofing Slate" 2011,ASTM,"C55-11 Standard Specification for Concrete Building Brick" 2013,ASTM,"D1970/D1970M-13 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection" 2011,ASTM,"D2487-11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)" 2012,ASTM,"D3035-12e1 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter" 2012,ASTM,"D3350-12e1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials" 2012,ASTM,"D3737-12 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)" 2011,ASTM,"D4869/D4869M-05(2011)e1 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing" 2008,ASTM,"D6162-00a(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2012,ASTM,"D7672-12 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2012,ASTM,"D86-12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2012,ASTM,"E119-12a Standard Test Methods for Fire Tests of Building Construction and Materials" 2012,ASTM,"E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2012,ASTM,"E1996-12a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2010,ASTM,"E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus" 2013,ASTM,"E2404-13e1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact" 2009,ASTM,"E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 2013,ASTM,"E814-13 Standard Test Method for Fire Tests of Penetration Firestop Systems" 2013,ASTM,"E96/E96M-13 Standard Test Methods for Water Vapor Transmission of Materials" 2010,ASTM,"E970-10 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2009,ASTM,"A126-04(2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings" 2013,ASTM,"A182/A182M-13 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service" 2013,ASTM,"A403/A403M-13 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings" 2011,ASTM,"B68/B68M-11 Standard Specification for Seamless Copper Tube, Bright Annealed" 2011,ASTM,"B75/B75M-11 Standard Specification for Seamless Copper Tube" 2012,ASTM,"C1063-12c Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2010,ASTM,"C1116/C1116M-10a Standard Specification for Fiber-Reinforced Concrete" 2013,ASTM,"C1396/C1396M-13 Standard Specification for Gypsum Board" 2013,ASTM,"C1563-08(2013) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications" 2012,ASTM,"C150/C150M-12 Standard Specification for Portland Cement" 2014,ASTM,"C206-14 Standard Specification for Finishing Hydrated Lime" 2009,ASTM,"C35-01(2009) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster" 2011,ASTM,"C428/C428M-05(2011)e1 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe" 2010,ASTM,"C503/C503M-10 Standard Specification for Marble Dimension Stone" 2009,ASTM,"C557-03(2009)e1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing" 2010,ASTM,"C568/C568M-10 Standard Specification for Limestone Dimension Stone" 2010,ASTM,"C616/C616M-10 Standard Specification for Quartz-Based Dimension Stone" 2010,ASTM,"C629/C629M-10 Standard Specification for Slate Dimension Stone" 2013,ASTM,"C728-13 Standard Specification for Perlite Thermal Insulation Board" 2012,ASTM,"C91/C91M-12 Standard Specification for Masonry Cement" 2010,ASTM,"C957/C957M-10 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface" 2013,ASTM,"D2513-13 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings" 2005,ASTM,"D2823-05 Standard Specification for Asphalt Roof Coatings, Asbestos Containing" 2012,ASTM,"D2824/D2824M-06(2012)e1 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos" 2013,ASTM,"D3201/D3201M-13 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products" 2013,ASTM,"D3689/D3689M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load" 2010,ASTM,"D6754/D6754M-10 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing" 2013,ASTM,"D6757-07(2013) Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2012,ASTM,"D7655/D7655M-12 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems" 2011,ASTM,"E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems" 2010,ASTM,"E2556/E2556M-10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment" 2013,ASTM,"E2632/E2632M-13e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials" 2012,ASTM,"F547-06(2012) Standard Terminology of Nails for Use with Wood and Wood-Base Materials "