2013,ASTM,"C635/C635M-13 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings" 2009,ASTM,"C595/C595M-09 Standard Specification for Blended Hydraulic Cements" 2019,ASTM,"G151-19 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2018,ASTM,"F3125/F3125M-18 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength" 2019,ASTM,"F2620-19 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings" 2019,ASTM,"F2618-19 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems" 2019,ASTM,"F2206-19 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)" 2019,ASTM,"F2165-19 Standard Specification for Flexible Pre-Insulated Plastic Piping" 2018,ASTM,"F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings" 2019,ASTM,"F1488-14(2019) Standard Specification for Coextruded Composite Pipe" 2018,ASTM,"F1292-18 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment" 2019,ASTM,"F1290-19 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings" 2018,ASTM,"F1137/F1137M-18 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners" 2018,ASTM,"F645-18b Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2019,ASTM,"F446-19 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area" 2019,ASTM,"E3188-19 Standard Terminology for Aircraft Braking Performance" 2018,ASTM,"E3173-18 Standard Guide for Decommissioning and Disposal of Medical Equipment" 2018,ASTM,"E3158-18 Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building" 2017,ASTM,"E3134-17 Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems" 2018,ASTM,"E3133-18 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine" 2018,ASTM,"E3130-18 Standard Guide for Developing Cost-Effective Community Resilience Strategies" 2019,ASTM,"E3069-19 Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall" 2018,ASTM,"E2979-18 Standard Classification for Discarded Materials from Manufacturing Facilities and Associated Support Facilities" 2019,ASTM,"E2914/E2914M-19 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples" 2019,ASTM,"E2913/E2913M-19 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples" 2018,ASTM,"E2788/E2788M-18 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems" 2018,ASTM,"E2652-18 Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C" 2019,ASTM,"E2400/E2400M-19 Standard Guide for Selection, Installation, and Maintenance of Plants for Vegetative (Green) Roof Systems" 2019,ASTM,"E2399/E2399M-19 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems" 2015,ASTM,"E2398/E2398M-15a Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems" 2019,ASTM,"E2398/E2398M-19 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems" 2019,ASTM,"E2397/E2397M-19 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems" 2019,ASTM,"E2396/E2396M-19 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems" 2019,ASTM,"E2319-04(2019) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2018,ASTM,"E2271/E2271M-18 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings" 2019,ASTM,"E2114-19 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2019,ASTM,"E2112-19 Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2018,ASTM,"E1995-18 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 2019,ASTM,"E1753-19 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2019,ASTM,"E1663-03(2019) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology" 2018,ASTM,"E1605-18b Standard Terminology Relating to Lead in Buildings" 2019,ASTM,"E1032-19 Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film" 2019,ASTM,"E927-19 Standard Classification for Solar Simulators for Electrical Performance Testing of Photovoltaic Devices" 2019,ASTM,"E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 2019,ASTM,"E336-19 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2018,ASTM,"E176-18a Standard Terminology of Fire Standards" 2018,ASTM,"E165/E165M-18 Standard Practice for Liquid Penetrant Testing for General Industry" 2019,ASTM,"E164-19 Standard Practice for Contact Ultrasonic Testing of Weldments" 2019,ASTM,"E136-19 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C" 2018,ASTM,"E119-18ce1 Standard Test Methods for Fire Tests of Building Construction and Materials" 2019,ASTM,"E29-13(2019) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2018,ASTM,"D8239-18 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test" 2018,ASTM,"D8237-18 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device" 2018,ASTM,"D8232-18 Standard Test Procedures for Measuring the Inclination of Deep Foundations" 2018,ASTM,"D8204-18 Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners" 2018,ASTM,"D8203-18 Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device" 2018,ASTM,"D8202-18 Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches" 2018,ASTM,"D8198-18 Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches" 2018,ASTM,"D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)" 2018,ASTM,"D8173-18 Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats" 2018,ASTM,"D8172-18 Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes" 2018,ASTM,"D8169/D8169M-18 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load" 2018,ASTM,"D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)" 2018,ASTM,"D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)" 2018,ASTM,"D8159-18 Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures" 2018,ASTM,"D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test" 2018,ASTM,"D8140-18 Standard Guide for the Use of Foundry Sand in Asphalt Mixtures" 2018,ASTM,"D8138-18 Standard Specification for Preformed Silicone Joint Sealing System for Bridges" 2018,ASTM,"D8121/D8121M-18 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device" 2018,ASTM,"D8105-18 Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results" 2018,ASTM,"D8082-18 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application" 2019,ASTM,"D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test" 2018,ASTM,"D8053-18 Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing" 2019,ASTM,"D8030/D8030M-19 Standard Practice for Sample Preparation for GCCM" 2018,ASTM,"D8012-18 Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications" 2018,ASTM,"D7694/D7694M-18 Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material" 2018,ASTM,"D7648/D7648M-18 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment" 2019,ASTM,"D7626-19 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay" 2018,ASTM,"D7496-18 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer" 2019,ASTM,"D7495-12(2019) Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials" 2018,ASTM,"D7467-18b Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2019,ASTM,"D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing" 2018,ASTM,"D7196-18 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples" 2019,ASTM,"D7158/D7158M-19 Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)" 2018,ASTM,"D7015/D7015M-18 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils" 2018,ASTM,"D6933-18 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)" 2018,ASTM,"D6820-18 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Site Characterization" 2018,ASTM,"D6771-18 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations" 2018,ASTM,"D6758-18 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method" 2019,ASTM,"D6707/D6707M-06(2019) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications" 2018,ASTM,"D6684-18 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems" 2018,ASTM,"D6639-18 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations" 2018,ASTM,"D6622/D6622M-01(2018)e1 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems" 2017,ASTM,"D6564/D6564M-17 Standard Guide for Field Filtration of Groundwater Samples" 2018,ASTM,"D6506/D6506M-01(2018)e1 Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing" 2019,ASTM,"D6370-99(2019) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)" 2019,ASTM,"D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method" 2019,ASTM,"D6276-19 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization" 2006,ASTM,"D6276-99a(2006) Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization" 1999,ASTM,"D6276-99a Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization" 2018,ASTM,"D6274-18 Standard Guide for Conducting Borehole Geophysical Logging - Gamma" 2018,ASTM,"D6235-18 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites" 2018,ASTM,"D6083/D6083M-18 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing" 2019,ASTM,"D6072/D6072M-19 Standard Practice for Obtaining Samples of Geosynthetic Clay Liners" 2017,ASTM,"D6067/D6067M-17 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity" 2018,ASTM,"D5995-18 Standard Guide for Environmental Site Investigation in Cold Regions" 2018,ASTM,"D5981/D5981M-18 Standard Guide for Calibrating a Groundwater Flow Model Application" 2018,ASTM,"D5879/D5879M-18 Standard Practice for Surface Site Characterization for On-Site Septic Systems" 2017,ASTM,"D5876/D5876M-17 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2018,ASTM,"D5869/D5869M-07A(2018)e1 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials" 2019,ASTM,"D5798-19 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2018,ASTM,"D5777-18 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation" 2019,ASTM,"D5751-99(2019) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products" 2015,ASTM,"D5745-15 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation" ,ASTM,"D5745-09 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation" 2009,ASTM,"D5745-09 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation" 2005,ASTM,"D5745-95(2005) Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation" 1999,ASTM,"D5745-95(1999) Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation" 2019,ASTM,"D5572-95(2019) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products" 2019,ASTM,"D5457-19 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2018,ASTM,"D5457-18 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2019,ASTM,"D5397-19 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 2014,ASTM,"D5370-14 Standard Specification for Pozzolanic Blended Materials in Construction Applications" 2013,ASTM,"D5370-06(2013) Standard Specification for Pozzolanic Blended Materials in Construction Applications" 2002,ASTM,"D5370-96(2002) Standard Specification for Pozzolanic Blended Materials in Construction Applications" 1996,ASTM,"D5370-96 Standard Specification for Pozzolanic Blended Materials in Construction Applications" 2006,ASTM,"D5370-06 Standard Specification for Pozzolanic Blended Materials in Construction Applications" 2019,ASTM,"D5323-19a Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes" 2019,ASTM,"D5323-19 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes" 2018,ASTM,"D5299/D5299M-18 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities" 2017,ASTM,"D5299/D5299M-17 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities" 2018,ASTM,"D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer" 2018,ASTM,"D4943-18 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method" 2019,ASTM,"D4814-19 Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4806-18a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel" 2019,ASTM,"D4792/D4792M-13(2019) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions" 2018,ASTM,"D4761-18 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials" 2018,ASTM,"D4696-18 Standard Guide for Pore-Liquid Sampling from the Vadose Zone" 2018,ASTM,"D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique" 2019,ASTM,"D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test" 2018,ASTM,"D4553-18 Standard Test Method for Determining In Situ Creep Characteristics of Rock" 2019,ASTM,"D4544-19 Standard Practice for Estimating Peat Deposit Thickness" 2018,ASTM,"D4259-18 Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application" 2019,ASTM,"D4073/D4073M-06(2019)e1 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes" 2019,ASTM,"D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position" 2019,ASTM,"D3690-19 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics—Indoor" 2018,ASTM,"D3597-02(2018)e1 Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked" 2018,ASTM,"D3381/D3381M-18 Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction" 2018,ASTM,"D3370-18 Standard Practices for Sampling Water from Flowing Process Streams" 2018,ASTM,"D3320/D3320M-18 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)" 2019,ASTM,"D3251-19 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire" 2019,ASTM,"D3213-19 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil" 2019,ASTM,"D3161/D3161M-19 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)" 2018,ASTM,"D2949-18 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings" 2019,ASTM,"D2846/D2846M-19 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems" 2019,ASTM,"D2829/D2829M-07(2019)e1 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems" 2019,ASTM,"D2794-93(2019) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)" 2018,ASTM,"D2746/D2746M-18 Standard Test Method for Staining Tendency of Asphalt (Stain Index)" 2019,ASTM,"D2643/D2643M-08(2019) Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)" 2019,ASTM,"D2523/D2523M-13(2019)e1 Standard Practice for Testing Load-Strain Properties of Roofing Membranes" 2018,ASTM,"D2386-18 Standard Test Method for Freezing Point of Aviation Fuels" 2019,ASTM,"D2290-19 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe" 2019,ASTM,"D2202-00(2019) Standard Test Method for Slump of Sealants" 2018,ASTM,"D2170/D2170M-18 Standard Test Method for Kinematic Viscosity of Asphalts" 2019,ASTM,"D2050-19 Standard Terminology Relating to Subassemblies Used in the Manufacture of Textiles" 2018,ASTM,"D1835-18a Standard Specification for Liquefied Petroleum (LP) Gases" 2018,ASTM,"D1586/D1586M-18 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils" 2018,ASTM,"D1165-18 Standard Nomenclature of Commercial Hardwoods and Softwoods" 2018,ASTM,"D1079-18e1 Standard Terminology Relating to Roofing and Waterproofing" 2018,ASTM,"D1079-18 Standard Terminology Relating to Roofing and Waterproofing" 2018,ASTM,"D1066-18e1 Standard Practice for Sampling Steam" 2019,ASTM,"D975-19 Standard Specification for Diesel Fuel Oils" 2018,ASTM,"D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2019,ASTM,"D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces" 2018,ASTM,"D420-18 Standard Guide for Site Characterization for Engineering Design and Construction Purposes" 1998,ASTM,"D420-98 Guide to Site Characterization for Engineering, Design, and Construction Purposes" 2018,ASTM,"D8-18c Standard Terminology Relating to Materials for Roads and Pavements" 2018,ASTM,"C1884-18 Standard Specification for Concrete Ballast Block" 2018,ASTM,"C1877-18 Standard Specification for Adhered Concrete Masonry Units" 2018,ASTM,"C1875-18 Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)" 2018,ASTM,"C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement" 2018,ASTM,"C1872-18e1 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement" 2018,ASTM,"C1872-18 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement" 2018,ASTM,"C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension" 2018,ASTM,"C1851-18 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus" 2018,ASTM,"C1825-18e1 Standard Guide for Developing Specifications for Masonry Units" 2018,ASTM,"C1825-18 Standard Guide for Developing Specifications for Masonry Units" 2018,ASTM,"C1802-18b Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures" 2019,ASTM,"C1798/C1798M-19 Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete" 2018,ASTM,"C1717-18 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels" 2019,ASTM,"C1714/C1714M-19 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry" 2016,ASTM,"C1697-16 Standard Specification for Blended Supplementary Cementitious Materials" 2018,ASTM,"C1697-18 Standard Specification for Blended Supplementary Cementitious Materials" 2019,ASTM,"C1675-19 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers" 2019,ASTM,"C1619-19 Standard Specification for Elastomeric Seals for Joining Concrete Structures" 2019,ASTM,"C1618-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure" 2019,ASTM,"C1618M-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)" 2018,ASTM,"C1602/C1602M-18 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete" 2018,ASTM,"C1600/C1600M-18 Standard Specification for Rapid Hardening Hydraulic Cement" 2019,ASTM,"C1530/C1530M-04(2019) Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses" 2019,ASTM,"C1459-04(2019) Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems" 2019,ASTM,"C1450/C1450M-04(2019) Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe" 2019,ASTM,"C1449/C1449M-05a(2019) Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe" 2019,ASTM,"C1448/C1448M-05(2019) Standard Specification for Non-Asbestos Fiber-Cement Conduit" 2019,ASTM,"C1447/C1447M-04(2019) Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe" 2018,ASTM,"C1409-12(2018) Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components" 2019,ASTM,"C1369-19 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units" 2019,ASTM,"C1367-19 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures" 2018,ASTM,"C1339/C1339M-18 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts" 2018,ASTM,"C1293-18a Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction" 2019,ASTM,"C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method" 2019,ASTM,"C1214M-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)" 2019,ASTM,"C1202-19 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration" 2017,ASTM,"C1181/C1181M-17 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts" 2018,ASTM,"C1180-18 Standard Terminology of Mortar and Grout for Unit Masonry" 2019,ASTM,"C1172-19 Standard Specification for Laminated Architectural Flat Glass" 2018,ASTM,"C1146-09(2018) Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air" 2019,ASTM,"C1103-19 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines" 2019,ASTM,"C1103M-19 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)" 2019,ASTM,"C1063-19 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2018,ASTM,"C1012/C1012M-18b Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution" 2018,ASTM,"C989/C989M-18a Standard Specification for Slag Cement for Use in Concrete and Mortars" 2019,ASTM,"C985M-19 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)" 2019,ASTM,"C969-19 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines" 2019,ASTM,"C969M-19 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)" 2019,ASTM,"C930-19 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories" 2018,ASTM,"C917/C917M-18 Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength" 2019,ASTM,"C822-19 Standard Terminology Relating to Concrete Pipe and Related Products" 2018,ASTM,"C805/C805M-18 Standard Test Method for Rebound Number of Hardened Concrete" 2018,ASTM,"C803/C803M-18 Standard Test Method for Penetration Resistance of Hardened Concrete" 2018,ASTM,"C795-08(2018) Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel" 2019,ASTM,"C719-14(2019) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)" 2018,ASTM,"C692-13(2018) Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel" 2010,ASTM,"G90-10 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight" 1998,ASTM,"G90-98 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight" 2005,ASTM,"G90-05 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight" 2007,ASTM,"G87-02(2007) Standard Practice for Conducting Moist SO2 Tests (Redline)" 2013,ASTM,"G87-02(2013) Standard Practice for Conducting Moist SO2 Tests" 2007,ASTM,"G87-02(2007) Standard Practice for Conducting Moist SO2 Tests" 2002,ASTM,"G87-02 Standard Practice for Conducting Moist SO2 Tests" 1998,ASTM,"G87-98 Standard Practice for Conducting Moist SO2 Tests" 2010,ASTM,"G8-96(2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings" 1996,ASTM,"G8-96 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings" 2003,ASTM,"G8-96(2003)e1 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings" 2003,ASTM,"G8-96(2003) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings" 2014,ASTM,"G62-14 Standard Test Methods for Holiday Detection in Pipeline Coatings (Redline)" 2014,ASTM,"G62-14 Standard Test Methods for Holiday Detection in Pipeline Coatings" 2013,ASTM,"G62-07(2013) Standard Test Methods for Holiday Detection in Pipeline Coatings" 2007,ASTM,"G62-07 Standard Test Methods for Holiday Detection in Pipeline Coatings" 2011,ASTM,"G37-98(2011) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys" 1998,ASTM,"G37-98 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys" 2004,ASTM,"G37-98(2004) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys" 2015,ASTM,"G21-15 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi (Redline)" 2015,ASTM,"G21-15 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi" 2013,ASTM,"G21-13 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi" 1996,ASTM,"G21-96 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi" 2009,ASTM,"G21-09 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi" 1990,ASTM,"G21-90 Standard Practice for Determining Resistance of Synthetic Polymetric Materials to Fungi" 2002,ASTM,"G21-96(2002) Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi" 2015,ASTM,"G190-15 Standard Guide for Developing and Selecting Wear Tests" 2012,ASTM,"G173-03(2012) Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface" 2008,ASTM,"G173-03(2008) Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface" 2003,ASTM,"G173-03e1 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface" 2010,ASTM,"G162-99(2010) Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils" 2004,ASTM,"G162-99(2004) Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils" 2019,ASTM,"C618-19 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete" 1999,ASTM,"G162-99 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils" 2013,ASTM,"G155-13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials (Redline)" 2013,ASTM,"G155-13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2000,ASTM,"G155-00ae1 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2005,ASTM,"G155-05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2005,ASTM,"G155-05 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2004,ASTM,"G155-04a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2004,ASTM,"G155-04 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2000,ASTM,"G155-00a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2000,ASTM,"G155-00 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials" 2012,ASTM,"G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials" 2012,ASTM,"G154-12 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials" 2019,ASTM,"C603-14(2019) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants" 2019,ASTM,"C497M-19 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)" 2019,ASTM,"C497-19 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile" 2018,ASTM,"C404-18 Standard Specification for Aggregates for Masonry Grout" 2018,ASTM,"C341/C341M-18 Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements" 2018,ASTM,"C311/C311M-18 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete" 2019,ASTM,"C270-19 Standard Specification for Mortar for Unit Masonry" 2018,ASTM,"C233/C233M-18 Standard Test Method for Air-Entraining Admixtures for Concrete" 2018,ASTM,"C192/C192M-18 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory" 2019,ASTM,"C177-19 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus" 2018,ASTM,"C144-18 Standard Specification for Aggregate for Masonry Mortar" 2018,ASTM,"C140/C140M-18a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units" 2018,ASTM,"C126-18 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units" 2019,ASTM,"C125-19 Standard Terminology Relating to Concrete and Concrete Aggregates" 2000,ASTM,"G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2006,ASTM,"G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2004,ASTM,"G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2000,ASTM,"G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2000,ASTM,"G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials" 2013,ASTM,"G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials (Redline)" 2013,ASTM,"G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2010,ASTM,"G153-04(2010) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2004,ASTM,"G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2013,ASTM,"G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials (Redline)" 2013,ASTM,"G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2006,ASTM,"G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2005,ASTM,"G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2004,ASTM,"G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2000,ASTM,"G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials" 2010,ASTM,"G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources (Redline)" 2010,ASTM,"G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2009,ASTM,"G151-09 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2018,ASTM,"C94/C94M-18 Standard Specification for Ready-Mixed Concrete" 2018,ASTM,"C88/C88M-18 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate" 2006,ASTM,"G151-06 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2017,ASTM,"G90-17 Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight" 2017,ASTM,"F3220-17 Standard Practice for Prioritizing Sewer Pipe Cleaning Operations by Using Transmissive Acoustic Inspection" 2017,ASTM,"F3095-17a Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System" 2017,ASTM,"F3080-17a Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector and CCTV Camera System" 2000,ASTM,"G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2018,ASTM,"F2656/F2656M-18 Standard Test Method for Crash Testing of Vehicle Security Barriers" 2017,ASTM,"F2376-17a Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems" 2017,ASTM,"F2376-17 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems" 2017,ASTM,"F2200-17 Standard Specification for Automated Vehicular Gate Construction" 2018,ASTM,"F2170-18 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 1997,ASTM,"G151-97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources" 2017,ASTM,"F2170-17 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 2018,ASTM,"F2159-18 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2017,ASTM,"F2090-17 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2004,ASTM,"G142-98(2004) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both" 2017,ASTM,"F2006-17 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2018,ASTM,"F1973-13(2018) Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 2011,ASTM,"G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both" 1998,ASTM,"G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both" 2018,ASTM,"F1910-98(2018) Standard Specification for Long Barbed Tape Obstacles" 2018,ASTM,"F1866-18 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 2017,ASTM,"F1866-13(2017) Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 2018,ASTM,"F1759-97(2018) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications" 2018,ASTM,"F1700-18a Standard Specification for Solid Vinyl Floor Tile" 2018,ASTM,"F1700-18 Standard Specification for Solid Vinyl Floor Tile" 2018,ASTM,"F1665-08(2018) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence" 2008,ASTM,"F976-08 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use (Redline)" 2002,ASTM,"F976-02 Specification for Portable Kerosine and Diesel Containers for Consumer Use" 1999,ASTM,"F976-99 Standard Specification for Portable Kerosine Containers for Consumer Use" 2015,ASTM,"F970-15 Standard Test Method for Static Load Limit" 2007,ASTM,"F970-07 Standard Test Method for Static Load Limit" 2006,ASTM,"F970-06 Standard Test Method for Static Load Limit" 2000,ASTM,"F970-00 Standard Test Method for Static Load Limit" 2011,ASTM,"F970-07(2011) Standard Test Method for Static Load Limit" 2011,ASTM,"F969-11 Standard Practice for Construction of Chain-Link Tennis Court Fence" 1996,ASTM,"F969-96 Standard Practice for Construction of Chain-Link Tennis Court Fence" 2007,ASTM,"F969-07 Standard Practice for Construction of Chain-Link Tennis Court Fence" 2001,ASTM,"F969-01 Standard Practice for Construction of Chain-Link Tennis Court Fence" 2011,ASTM,"F969-11 Standard Practice for Construction of Chain-Link Tennis Court Fence (Redline)" 2008,ASTM,"F963-08 Standard Consumer Safety Specification for Toy Safety" 2011,ASTM,"F963-11 Standard Consumer Safety Specification for Toy Safety" 2007,ASTM,"F963-07e1 Standard Consumer Safety Specification for Toy Safety" 2007,ASTM,"F963-07 Standard Consumer Safety Specification for Toy Safety" 2003,ASTM,"F963-03 Standard Consumer Safety Specification for Toy Safety" 1996,ASTM,"F963-96ae2 Standard Consumer Safety Specification for Toy Safety" 1996,ASTM,"F963-96ae1 Standard Consumer Safety Specification on Toy Safety" 1996,ASTM,"F963-96a Standard Consumer Safety Specification on Toy Safety" 2001,ASTM,"F959M-01 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 1999,ASTM,"F959M-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2007,ASTM,"F959M-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2006,ASTM,"F959M-06 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2002,ASTM,"F959M-02 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2001,ASTM,"F959M-01a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2004,ASTM,"F959M-04 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]" 2015,ASTM,"F959-15 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners (Redline)" 2015,ASTM,"F959-15 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2013,ASTM,"F959-13 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2009,ASTM,"F959-09 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 1999,ASTM,"F959-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2007,ASTM,"F959-07a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2007,ASTM,"F959-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2006,ASTM,"F959-06 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2005,ASTM,"F959-05a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2005,ASTM,"F959-05 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2004,ASTM,"F959-04 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2002,ASTM,"F959-02 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2001,ASTM,"F959-01a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2001,ASTM,"F959-01 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners" 2015,ASTM,"F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings (Redline)" 2015,ASTM,"F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2010,ASTM,"F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2009,ASTM,"F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2006,ASTM,"F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2006,ASTM,"F949-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2003,ASTM,"F949-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2001,ASTM,"F949-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2001,ASTM,"F949-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2000,ASTM,"F949-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings" 2013,ASTM,"F934-96(2013) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials" 2003,ASTM,"F934-96(2003) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials" 1996,ASTM,"F934-96 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials" 2008,ASTM,"F934-96(2008) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials" 2013,ASTM,"F925-13 Standard Test Method for Resistance to Chemicals of Resilient Flooring (Redline)" 2013,ASTM,"F925-13 Standard Test Method for Resistance to Chemicals of Resilient Flooring" 1997,ASTM,"F925-97 Standard Test Method for Resistance to Chemicals of Resilient Flooring" 2008,ASTM,"F925-02(2008) Standard Test Method for Resistance to Chemicals of Resilient Flooring" 2002,ASTM,"F925-02 Standard Test Method for Resistance to Chemicals of Resilient Flooring" 2008,ASTM,"F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials" 2003,ASTM,"F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials" 1998,ASTM,"F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials" 2010,ASTM,"F903-10 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids" 2004,ASTM,"F903-03(2004) Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids" 2003,ASTM,"F903-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids" 1999,ASTM,"F903-99a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids" 2011,ASTM,"F900-11 Standard Specification for Industrial and Commercial Swing Gates" 2000,ASTM,"F900-94(2000) Standard Specification for Industrial and Commercial Swing Gates" 2005,ASTM,"F900-05 Standard Specification for Industrial and Commercial Swing Gates" 2003,ASTM,"F900-03 Standard Specification for Industrial and Commercial Swing Gates" 2013,ASTM,"F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe (Redline)" 2013,ASTM,"F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe" 1998,ASTM,"F894-98a Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe" 2007,ASTM,"F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe" 2006,ASTM,"F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe" 2005,ASTM,"F894-05 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe" 2010,ASTM,"F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core (Redline)" 2010,ASTM,"F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2009,ASTM,"F891-09 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2007,ASTM,"F891-07 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2004,ASTM,"F891-04 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2000,ASTM,"F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2000,ASTM,"F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core" 2013,ASTM,"F883-13 Standard Performance Specification for Padlocks (Redline)" 2013,ASTM,"F883-13 Standard Performance Specification for Padlocks" 2009,ASTM,"F883-09 Standard Performance Specification for Padlocks" 1997,ASTM,"F883-97 Standard Performance Specification for Padlocks" 2004,ASTM,"F883-04 Standard Performance Specification for Padlocks" 2015,ASTM,"F88/F88M-15 Standard Test Method for Seal Strength of Flexible Barrier Materials (Redline)" 2015,ASTM,"F88/F88M-15 Standard Test Method for Seal Strength of Flexible Barrier Materials" 2015,ASTM,"F879M-02a(2015) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)" 1998,ASTM,"F879M-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2008,ASTM,"F879M-02a(2008) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)" 2002,ASTM,"F879M-02a Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2002,ASTM,"F879M-02 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2001,ASTM,"F879M-01 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2015,ASTM,"F879-15 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Redline)" 2015,ASTM,"F879-15 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2012,ASTM,"F879-12 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2010,ASTM,"F879-10 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 1998,ASTM,"F879-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2008,ASTM,"F879-02a(2008) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2002,ASTM,"F879-02a Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2002,ASTM,"F879-02 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2001,ASTM,"F879-01 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws" 2011,ASTM,"F877-11 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems" 2007,ASTM,"F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2005,ASTM,"F877-05 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2002,ASTM,"F877-02a Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2002,ASTM,"F877-02 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2001,ASTM,"F877-01 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2000,ASTM,"F877-00 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2011,ASTM,"F877-11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems" 2011,ASTM,"F877-11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems (Redline)" 2002,ASTM,"F877-02e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2001,ASTM,"F877-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems" 2018,ASTM,"F1664-08(2018) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence" 2015,ASTM,"F876-15a Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2015,ASTM,"F876-15 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2013,ASTM,"F876-13a Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2013,ASTM,"F876-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2008,ASTM,"F876-08 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2010,ASTM,"F876-10 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2009,ASTM,"F876-09 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2008,ASTM,"F876-08b Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2008,ASTM,"F876-08a Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2007,ASTM,"F876-07 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2006,ASTM,"F876-06 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2005,ASTM,"F876-05 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2004,ASTM,"F876-04 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2003,ASTM,"F876-03a Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2003,ASTM,"F876-03 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2002,ASTM,"F876-02 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2001,ASTM,"F876-01 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2000,ASTM,"F876-00 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2010,ASTM,"F876-10e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2003,ASTM,"F876-03e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2001,ASTM,"F876-01e2 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2001,ASTM,"F876-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2013,ASTM,"F851-87(2013) Standard Test Method for Self-Rising Seat Mechanisms" 2005,ASTM,"F851-87(2005) Standard Test Method for Self-Rising Seat Mechanisms" 2000,ASTM,"F851-87(2000) Standard Test Method for Self-Rising Seat Mechanisms" 1996,ASTM,"F851-87(1996) Standard Test Method for Self-Rising Seat Mechanisms" 2013,ASTM,"F844-07a(2013) Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use" 2004,ASTM,"F844-04e1 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use" 2004,ASTM,"F844-04 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use" 2007,ASTM,"F844-07a Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use (Redline)" 2000,ASTM,"F844-00 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use" 2007,ASTM,"F844-07a Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use" 2014,ASTM,"F842-14 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact" 2017,ASTM,"F1642/F1642M-17 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 2013,ASTM,"F842-13 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact" 2012,ASTM,"F842-12 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact " 1997,ASTM,"F842-97 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact" 2004,ASTM,"F842-04 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact" 2015,ASTM,"F837M-02a(2015) Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2010,ASTM,"F837M-02a(2010) Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2001,ASTM,"F837M-01 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2000,ASTM,"F837M-00 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2002,ASTM,"F837M-02a Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2002,ASTM,"F837M-02 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2013,ASTM,"F837-13e1 Standard Specification for Stainless Steel Socket Head Cap Screws" 2013,ASTM,"F837-13 Standard Specification for Stainless Steel Socket Head Cap Screws" 1998,ASTM,"F837-98 Standard Specification for Stainless Steel Socket Head Cap Screws" 2002,ASTM,"F837-02ae1 Standard Specification for Stainless Steel Socket Head Cap Screws" 2002,ASTM,"F837-02a Standard Specification for Stainless Steel Socket Head Cap Screws" 2001,ASTM,"F837-01 Standard Specification for Stainless Steel Socket Head Cap Screws" 2008,ASTM,"F837-08 Standard Specification for Stainless Steel Socket Head Cap Screws (Redline)" 2002,ASTM,"F837-02 Standard Specification for Stainless Steel Socket Head Cap Screws" 2008,ASTM,"F837-08 Standard Specification for Stainless Steel Socket Head Cap Screws" 2015,ASTM,"F836M-02(2015) Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)" 2010,ASTM,"F836M-02(2010) Standard Specification for Style 1 Stainless Steel Metric Nuts" 1998,ASTM,"F836M-98 Standard Specification for Style 1 Stainless Steel Metric Nuts" 2001,ASTM,"F836M-01a Standard Specification for Style 1 Stainless Steel Metric Nuts" 2001,ASTM,"F836M-01 Standard Specification for Style 1 Stainless Steel Metric Nuts" 2002,ASTM,"F836M-02 Standard Specification for Style 1 Stainless Steel Metric Nuts" 2004,ASTM,"F835M-04 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2000,ASTM,"F835M-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2003,ASTM,"F835M-03 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]" 2013,ASTM,"F835-13 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2004,ASTM,"F835-04 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2000,ASTM,"F835-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2004,ASTM,"F835-04e1 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2003,ASTM,"F835-03 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2012,ASTM,"F835-12 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws " 1999,ASTM,"F834-84(1999) Consumer Safety Specification for Toy Chests" 2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields (Redline)" 2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields" 1999,ASTM,"F810-99 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields" 2007,ASTM,"F810-07 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields" 2001,ASTM,"F810-01 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields" 2014,ASTM,"F794-03(2014) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter" 2009,ASTM,"F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter" 1999,ASTM,"F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter" 2003,ASTM,"F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter" 2001,ASTM,"F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter" 2010,ASTM,"F793-10a Standard Classification of Wall Covering by Use Characteristics (Redline)" 2010,ASTM,"F793-10a Standard Classification of Wall Covering by Use Characteristics" 2010,ASTM,"F793-10 Standard Classification of Wall Covering by Use Characteristics" 2004,ASTM,"F793-93(2004) Standard Classification of Wallcovering by Durability Characteristics" 1998,ASTM,"F793-93(1998) Standard Classification of Wallcovering by Durability Characteristics" 2007,ASTM,"F793-07 Standard Classification of Wall Covering by Use Characteristics" 2006,ASTM,"F793-06 Standard Classification of Wall Covering by Use Characteristics" 2005,ASTM,"F793-05 Standard Classification of Wall Covering by Durability Characteristic" 2015,ASTM,"F79-69(2015) Standard Specification for Type 101 Sealing Glass" 2010,ASTM,"F79-69(2010) Standard Specification for Type 101 Sealing Glass" 2000,ASTM,"F79-69(2000) Standard Specification for Type 101 Sealing Glass" 1995,ASTM,"F79-69(1995)e1 Standard Specification for Type 101 Sealing Glass" 2005,ASTM,"F79-69(2005) Standard Specification for Type 101 Sealing Glass" 1999,ASTM,"F771-99 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems" 1999,ASTM,"F771-99e1 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems" 2008,ASTM,"F738M-02(2008) Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs (Redline)" 2002,ASTM,"F738M-02 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs" 2001,ASTM,"F738M-01 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs" 2000,ASTM,"F738M-00 Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs" 2013,ASTM,"F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter (Redline)" 2013,ASTM,"F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter" 2012,ASTM,"F714-12a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter" 2012,ASTM,"F714-12e1 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter" 2010,ASTM,"F714-10 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2008,ASTM,"F714-08 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2006,ASTM,"F714-06a Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2006,ASTM,"F714-06 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2005,ASTM,"F714-05 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2003,ASTM,"F714-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2001,ASTM,"F714-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2000,ASTM,"F714-00 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter" 2012,ASTM,"F714-12 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter " 2011,ASTM,"F710-11 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2017,ASTM,"F1554-17e1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 1998,ASTM,"F710-98 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2008,ASTM,"F710-08 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2005,ASTM,"F710-05 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2003,ASTM,"F710-03 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2014,ASTM,"F708-92(2014) Standard Practice for Design and Installation of Rigid Pipe Hangers" 2008,ASTM,"F708-92(2008) Standard Practice for Design and Installation of Rigid Pipe Hangers" 2004,ASTM,"F708-92(2004) Standard Practice for Design and Installation of Rigid Pipe Hangers" 1997,ASTM,"F708-92(1997) Standard Practice for Design and Installation of Rigid Pipe Hangers" 2012,ASTM,"F693-01(2012) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers " 1995,ASTM,"F693-95 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers" 2007,ASTM,"F693-01(2007) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers" 2019,ASTM,"C76M-19 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)" 2019,ASTM,"C76-19 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C67/C67M-18 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile" 2017,ASTM,"F1554-17 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2018,ASTM,"C42/C42M-18a Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete" 2018,ASTM,"F1516-13(2018) Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)" 2017,ASTM,"F1499-17 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)" 2014,ASTM,"F1488-14e1 Standard Specification for Coextruded Composite Pipe" 2017,ASTM,"F1459-06(2017) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)" 2018,ASTM,"F1346-91(2018) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs" 2017,ASTM,"F1292-17a Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment" 2001,ASTM,"F693-01 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers" 2018,ASTM,"F1267-18 Standard Specification for Metal, Expanded, Steel" 2018,ASTM,"F1083-18 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2018,ASTM,"F1043-18 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2018,ASTM,"F1007-18 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application" 2017,ASTM,"F963-17 Standard Consumer Safety Specification for Toy Safety" 2017,ASTM,"F959/F959M-17a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series" 1998,ASTM,"G62-87(1998) Standard Test Methods for Holiday Detection in Pipeline Coatings" 2016,ASTM,"G37-98(2016) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys" 2016,ASTM,"G142-98(2016) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both" 2016,ASTM,"F969-11(2016) Standard Practice for Construction of Chain-Link Tennis Court Fence" 2016,ASTM,"F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials (Redline)" 2016,ASTM,"F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials" 2007,ASTM,"F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe (Redline)" 2009,ASTM,"F883-09 Standard Performance Specification for Padlocks (Redline)" 2016,ASTM,"F879M-16 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Redline)" 2016,ASTM,"F879M-16 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)" 2016,ASTM,"F837M-16 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] (Redline)" 2016,ASTM,"F837M-16 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]" 2016,ASTM,"F836M-16 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) (Redline)" 2016,ASTM,"F836M-16 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)" 2012,ASTM,"F628-12e2 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2016,ASTM,"F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 2012,ASTM,"F439-12 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 (Redline)" 2005,ASTM,"F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Redline)" 2012,ASTM,"F2972-12 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System" 2016,ASTM,"F2930-16 Standard Guide for Compliance with Light Sport Aircraft Standards (Redline)" 2016,ASTM,"F2930-16 Standard Guide for Compliance with Light Sport Aircraft Standards" 2012,ASTM,"F2746-12 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane" 2009,ASTM,"F2746-09 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane" 2016,ASTM,"F2735-09(2016) Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2016,ASTM,"F2592-16 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch (Redline)" 2016,ASTM,"F2592-16 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2016,ASTM,"F2551-09(2016) Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes" 2016,ASTM,"F2454-05(2016)e1 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting" 2016,ASTM,"F2414-04(2016) Standard Practice for Sealing Sewer Manholes Using Chemical Grouting" 2010,ASTM,"F2354-05b(2010) Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft (Redline)" 2016,ASTM,"F2317/F2317M-16 Standard Specification for Design of Weight-Shift-Control Aircraft" 2016,ASTM,"F2304-10(2016)e1 Standard Practice for Sealing of Sewers Using Chemical Grouting" 2016,ASTM,"F2245-16a Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"F2245-16 Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"F2170-16 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 2015,ASTM,"F2169-15e1 Standard Specification for Resilient Stair Treads" 2017,ASTM,"F959/F959M-17 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series" 2018,ASTM,"F877-18 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems" 2017,ASTM,"F876-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing" 2012,ASTM,"F1970-12 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems (Redline)" 1999,ASTM,"F1961-99 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing" 2016,ASTM,"F1869-16 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2007,ASTM,"F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings (Redline)" 2014,ASTM,"F1860-14e1 Standard Specification for Rubber Sheet Floor Covering With Backing" 2014,ASTM,"F1859-14e1 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2007,ASTM,"F1852-07 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2011,ASTM,"F1852-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2008,ASTM,"F1852-08 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2017,ASTM,"F842-17 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact" 2016,ASTM,"F1760-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content" 2016,ASTM,"F1743-08(2016) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)" 2019,ASTM,"C40/C40M-19 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete" 2016,ASTM,"F836M-16e1 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)" 2013,ASTM,"A1003/A1003M-13 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members" 2012,ASTM,"C836/C836M-12 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course" 2018,ASTM,"F810-12(2018) Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields" 2013,ASTM,"F679-13a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"F710-17 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring" 2018,ASTM,"F693-01(2018)e1 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers" 2018,ASTM,"F645-18a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2018,ASTM,"F645-18 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2015,ASTM,"F679-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"F588-17 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact" 2017,ASTM,"F547-17 Standard Terminology of Nails for Use with Wood and Wood-Base Materials" 2017,ASTM,"F445-88(2017) Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas" 2017,ASTM,"F444-88(2017) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas" 2018,ASTM,"E3145-18 Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)" 2013,ASTM,"F679-13 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"E3121/E3121M-17 Standard Test Methods for Field Testing of Anchors in Concrete or Masonry" 2017,ASTM,"E3120-17 Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings" 2017,ASTM,"E3119-17e1 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing" 2017,ASTM,"E3119-17 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing" 2017,ASTM,"E3096-17 Standard Guide for Definition, Selection, and Organization of Key Performance Indicators for Environmental Aspects of Manufacturing Processes" 2017,ASTM,"E3091-17 Standard Specification for Systems to Measure Sound Levels" 2017,ASTM,"E3090/E3090M-17 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems" 2017,ASTM,"E3087-17 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods" 2017,ASTM,"E3082-17 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees" 2017,ASTM,"E3073-17 Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects" 2017,ASTM,"E3069-17 Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall" 2018,ASTM,"E3053-18 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel" 2017,ASTM,"E3053-17 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel" 2017,ASTM,"E3048-17 Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel" 2018,ASTM,"E3027-18a Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products" 2018,ASTM,"E3027-18 Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products" 2017,ASTM,"E2988-17 Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics" 2017,ASTM,"E2987/E2987M-17 Standard Terminology for Sustainable Manufacturing" 2017,ASTM,"E2969-17 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction" 2008,ASTM,"F679-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2006,ASTM,"F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2006,ASTM,"F679-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"E2912-17 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction" 2018,ASTM,"E2817-11(2018) Standard Test Method for Test Fueling Masonry Heaters" 2016,ASTM,"F1662-16 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device (Redline)" 2018,ASTM,"E2816-18 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2017,ASTM,"E2811-17 Standard Practice for Management of Low Risk Property (LRP)" 2017,ASTM,"E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters" 2003,ASTM,"F679-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters" 2017,ASTM,"E2750-17 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM " 2018,ASTM,"E2727-18 Standard Practice for Assessment of Rainwater Quality" 2017,ASTM,"E2726/E2726M-12a(2017) Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands" 2017,ASTM,"E2715-17 Standard Practice for Moveable Property Storage" 2017,ASTM,"E2690-17b Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics" 2018,ASTM,"E2688-18 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics" 2001,ASTM,"F679-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2015,ASTM,"E2685-15 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test" 2017,ASTM,"E2638-10(2017) Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room" 2016,ASTM,"F1662-16 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device" 2018,ASTM,"E2634-18 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2017,ASTM,"E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings" 2018,ASTM,"E2599-18 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2015,ASTM,"E2527-15 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight" 1999,ASTM,"F1647-99 Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes" 2017,ASTM,"E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel" 2014,ASTM,"E2505-07(2014)e1 Standard Practice for Industrial Rope Access" 2017,ASTM,"E2497-11(2017) Standard Practice for Calculation of Asset Movement Velocity (AMV)" 2017,ASTM,"E2358-17 Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades" 2018,ASTM,"E2320-04(2018) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions" 2017,ASTM,"E2280-17 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities" 2017,ASTM,"E2265-17 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2018,ASTM,"E2255/E2255M-18 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings" 2018,ASTM,"E2252-18 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities" 2018,ASTM,"E2231-18 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2017,ASTM,"E2128-17 Standard Guide for Evaluating Water Leakage of Building Walls" 2018,ASTM,"E2112-18 Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2018,ASTM,"E2061-18 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2015,ASTM,"F1554-15e1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2016,ASTM,"F1412-16 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems (Redline)" 2016,ASTM,"F1412-16 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2001,ASTM,"F1336-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings" 1994,ASTM,"F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 2015,ASTM,"E2061-15 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2017,ASTM,"E1996-17 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2018,ASTM,"E1927-98(2018) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings" 2017,ASTM,"E1827-11(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 2017,ASTM,"E1825-17 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems" 2019,ASTM,"C31/C31M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Field" 2016,ASTM,"F1043-16a Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2019,ASTM,"B211/B211M-19 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire" 2019,ASTM,"B210/B210M-19 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes" 2000,ASTM,"F679-00a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings" 2017,ASTM,"E1822-17 Standard Test Method for Fire Testing of Stacked Chairs" 2018,ASTM,"E1802-12(2018) Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules" 2018,ASTM,"E1799-12(2018) Standard Practice for Visual Inspections of Photovoltaic Modules" 2017,ASTM,"E1797-12(2017)e1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2016,ASTM,"E96/E96M-16 Standard Test Methods for Water Vapor Transmission of Materials (Redline)" 2016,ASTM,"E96/E96M-16 Standard Test Methods for Water Vapor Transmission of Materials" 2017,ASTM,"E1783/E1783M-96(2017) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures" 2017,ASTM,"E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System" 2018,ASTM,"E1701-95(2018) Standard Classification for Serviceability of an Office Facility for Manageability" 2018,ASTM,"E1694-95a(2018) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies" 1995,ASTM,"E9-89(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature" 2018,ASTM,"E1693-95(2018) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets" 2016,ASTM,"E84-16 Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"E1692-95a(2018) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants" 1998,ASTM,"E83-98 Standard Practice for Verification and Classification of Extensometer" 2000,ASTM,"E83-00e1 Standard Practice for Verification and Classification of Extensometer" 2016,ASTM,"E795-16 Standard Practices for Mounting Test Specimens During Sound Absorption Tests" 1996,ASTM,"E73-83(1996)e1 Standard Practice for Static Load Testing of Truss Assemblies" 2018,ASTM,"E1671-95a(2018) Standard Classification for Serviceability of an Office Facility for Cleanliness" 2018,ASTM,"E1670-95a(2018) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance" 2018,ASTM,"E1669-95a(2018) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding" 2018,ASTM,"E1668-95a(2018) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff" 2018,ASTM,"E1667-95a(2018) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants" 2018,ASTM,"E1666-95a(2018) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions" 2018,ASTM,"E1665-95a(2018) Standard Classification for Serviceability of an Office Facility for Facility Protection" 2018,ASTM,"E1664-95a(2018) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors" 2018,ASTM,"E1662-95a(2018) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment" 2018,ASTM,"E1661-95a(2018) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness" 2018,ASTM,"E1660-95a(2018) Standard Classification for Serviceability of an Office Facility for Support for Office Work" 2018,ASTM,"E1643-18a Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2018,ASTM,"E1643-18 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2017,ASTM,"E1637-98(2017)e1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems" 2016,ASTM,"E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2017,ASTM,"E1612/E1612M-94(2017) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures" 2017,ASTM,"E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 2017,ASTM,"E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 2017,ASTM,"E1583-17 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures" 2018,ASTM,"B86-18 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings" 2018,ASTM,"E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels" 2016,ASTM,"E1529-16e1 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2017,ASTM,"E1514-98(2017)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems" 2017,ASTM,"E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type" 2017,ASTM,"E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers" 2018,ASTM,"E1462-12(2018) Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules" 2017,ASTM,"E1399/E1399M-97(2017) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems" 2018,ASTM,"E1374-18e1 Standard Guide for Office Acoustics and Applicable ASTM Standards" 2018,ASTM,"E1374-18 Standard Guide for Open Office Acoustics and Applicable ASTM Standards" 2016,ASTM,"E646-16 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials (Redline)" 2016,ASTM,"E646-16 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials" 1994,ASTM,"E604-83(1994) Standard Test Method for Dynamic Tear Testing of Metallic Materials" 2015,ASTM,"E6-15 Standard Terminology Relating to Methods of Mechanical Testing (Redline)" 2015,ASTM,"E6-15 Standard Terminology Relating to Methods of Mechanical Testing" 2018,ASTM,"A653/A653M-18 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process" 2018,ASTM,"A586-18 Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand" 2018,ASTM,"A416/A416M-18 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete" 2018,ASTM,"A381/A381M-18 Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems" 1999,ASTM,"E6-99e2 Standard Terminology Relating to Methods of Mechanical Testing" 2016,ASTM,"E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures" 2018,ASTM,"A370-18 Standard Test Methods and Definitions for Mechanical Testing of Steel Products" 2018,ASTM,"E1274-18 Standard Test Method for Measuring Pavement Roughness Using a Profilograph" 2017,ASTM,"E1186-17 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems" 2015,ASTM,"E1171-15 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments" 2015,ASTM,"E1036-15 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells " 2018,ASTM,"E1025-18 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography" 2017,ASTM,"E987-88(2017) Standard Test Methods for Deglazing Force of Fenestration Products" 2018,ASTM,"E966-18 Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements" 2018,ASTM,"E950/E950M-09(2018) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference" 2017,ASTM,"E917-17 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2018,ASTM,"E894-18 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings" 2016,ASTM,"E547-00(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference" 2011,ASTM,"F668-11 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric" 2016,ASTM,"E492-09(2016)e1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine" 2007,ASTM,"F668-07 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric" 1999,ASTM,"F668-99a Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric" 2006,ASTM,"F668-06 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric" 2017,ASTM,"E756-05(2017) Standard Test Method for Measuring Vibration-Damping Properties of Materials" 2017,ASTM,"E741-11(2017) Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution" 2017,ASTM,"E736/E736M-17 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members" 2017,ASTM,"E648-17a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2017,ASTM,"E580/E580M-17 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions" 2017,ASTM,"E336-17a Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2017,ASTM,"E336-17 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2018,ASTM,"E329-18 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2017,ASTM,"E308-17 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2013,ASTM,"E456-13ae3 Standard Terminology Relating to Quality and Statistics" 2018,ASTM,"A249/A249M-18a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes" 2015,ASTM,"E308-15 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2018,ASTM,"E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester" 2017,ASTM,"E230/E230M-17 Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples" 2018,ASTM,"E176-18 Standard Terminology of Fire Standards" 2018,ASTM,"E119-18 Standard Test Methods for Fire Tests of Building Construction and Materials" 2017,ASTM,"E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus" 2016,ASTM,"E455-16 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings" 2004,ASTM,"F668-04 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric" 2016,ASTM,"E454-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2016,ASTM,"E413-16 Classification for Rating Sound Insulation" 2017,ASTM,"E94/E94M-17 Standard Guide for Radiographic Examination Using Industrial Radiographic Film" 2018,ASTM,"E84-18 Standard Test Method for Surface Burning Characteristics of Building Materials" 2017,ASTM,"E84-17a Standard Test Method for Surface Burning Characteristics of Building Materials" 2014,ASTM,"E77-14e1 Standard Test Method for Inspection and Verification of Thermometers" 2017,ASTM,"D8154-17 Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics" 2017,ASTM,"D8139-17 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction" 2017,ASTM,"D8125-17 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)" 2017,ASTM,"D8117-17 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry" 2017,ASTM,"D8109-17 Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection" 2018,ASTM,"D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate" 2017,ASTM,"D8107-17 Standard Practice for Determining Sediment Pond Skimmer Flow Rate" 2017,ASTM,"D8106-17 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay" 2017,ASTM,"D8102-17 Standard Practice for Manufacturing Quality Control of Geotextiles" 2016,ASTM,"E4-16 Standard Practices for Force Verification of Testing Machines (Redline)" 2016,ASTM,"E4-16 Standard Practices for Force Verification of Testing Machines" 2017,ASTM,"D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)" 2017,ASTM,"D8081-17 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell" 2018,ASTM,"D8078-18 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues" 2017,ASTM,"D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test" 2017,ASTM,"D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test" 2017,ASTM,"D8057-17 Standard Specification for Inlet Filters with a Rigid Frame" 2016,ASTM,"E331-00(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference" 2016,ASTM,"E323-11(2016) Standard Specification for Perforated-Plate Sieves for Testing Purposes" 2017,ASTM,"D8055-17 Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards" 2017,ASTM,"D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies" 2017,ASTM,"D8023-17 Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction" 2017,ASTM,"D8014-17 Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems" 2018,ASTM,"D7931-18 Standard Guide for Specifying Drainage Geocomposites" 2017,ASTM,"D7931-17 Standard Guide for Specifying Drainage Geocomposites" 2017,ASTM,"D7862-17 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel" 2016,ASTM,"E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation (Redline)" 2016,ASTM,"E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation" 2017,ASTM,"D7851-17 Standard Guide for Design of Sustainable, Low-Slope Roofing Systems" 2018,ASTM,"D7765-18 Standard Practice for Use of Foundry Sand in Structural Fill and Embankments" 2018,ASTM,"D7765-18a Standard Practice for Use of Foundry Sand in Structural Fill and Embankments" 2018,ASTM,"D7762-18 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash" 2018,ASTM,"D7760-18 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter" 2018,ASTM,"D7749-11(2018) Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method" 2018,ASTM,"D7747/D7747M-11(2018) Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method" 2017,ASTM,"D7655/D7655M-12(2017) Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems" 2015,ASTM,"E2980-15 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability" 2014,ASTM,"E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability" 2016,ASTM,"E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments (Redline)" 2016,ASTM,"E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments" 2018,ASTM,"D7503-18 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils" 2017,ASTM,"D7496-17 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer" 2018,ASTM,"D7467-18 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2017,ASTM,"D7403-09(2017) Standard Test Method for Determination of Residue of Emulsified Asphalt by Low-Temperature Vacuum Distillation" 2017,ASTM,"D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts" 2017,ASTM,"D7400-17 Standard Test Methods for Downhole Seismic Testing" 2018,ASTM,"D7361-07(2018) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2014,ASTM,"D7359-14a Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)" 2017,ASTM,"D7322/D7322M-17 Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions" 2018,ASTM,"D7275-07(2018) Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)" 2018,ASTM,"D7274-06A(2018)e1 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)" 2018,ASTM,"D7272-06(2018) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods" 2018,ASTM,"D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens" 2018,ASTM,"D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens" 2018,ASTM,"D7240-18 Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)" 2017,ASTM,"D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2014,ASTM,"D7208-14e1 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2013,ASTM,"D7101-13e1 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions" 2018,ASTM,"D7056-07(2018) Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams" 2017,ASTM,"D7052/D7052M-17 Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)" 2018,ASTM,"D7014-18 Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses" 2018,ASTM,"D6951/D6951M-18 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications" 2017,ASTM,"D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2017,ASTM,"D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt" 2017,ASTM,"D6935-17 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt" 2017,ASTM,"D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2016,ASTM,"E2947-16a Standard Guide for Building Enclosure Commissioning (Redline)" 2016,ASTM,"E2947-16a Standard Guide for Building Enclosure Commissioning" 2016,ASTM,"E2947-16 Standard Guide for Building Enclosure Commissioning" 2018,ASTM,"D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2014,ASTM,"D6825-14e1 Standard Guide for Placement of Riprap Revetments" 2018,ASTM,"D6818-18 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products" 2016,ASTM,"E2921-16 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems (Redline)" 2016,ASTM,"E2921-16 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems" 2018,ASTM,"D6818-18a Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products" 2018,ASTM,"D6766-18 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions" 2018,ASTM,"D6757/D6757M-18 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2018,ASTM,"D6705/D6705M-04(2018) Standard Guide for Repair and Recoat of Spray Polyurethane Foam Roofing Systems" 2018,ASTM,"D6636-01(2018) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes" 2014,ASTM,"D6599-00(2014)e2 Standard Practice for Construction of Live Fascines on Slopes" 2018,ASTM,"D6566-18 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats" 2017,ASTM,"D6555-17 Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies" 2017,ASTM,"D6528-17 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils" 2018,ASTM,"D6525/D6525M-18 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products" 2018,ASTM,"D6511/D6511M-18 Standard Test Methods for Solvent Bearing Bituminous Compounds" 2018,ASTM,"D6495/D6495M-18 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners" 2017,ASTM,"D6475-17 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets" 2000,ASTM,"D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets" 2013,ASTM,"D6467-13e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils" 2018,ASTM,"D6461/D6461M-18 Standard Specifications for Silt Fence Materials" 2018,ASTM,"D6455-11(2018) Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)" 2015,ASTM,"D6449-99(2015)e1 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)" 2015,ASTM,"D6449-99(2015) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)" 2018,ASTM,"D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes" 2018,ASTM,"D6433-18 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 2018,ASTM,"D6431-18 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization" 2018,ASTM,"D6430-18 Standard Guide for Using the Gravity Method for Subsurface Site Characterization" 2016,ASTM,"E2691-16 Standard Practice for Job Productivity Measurement (Redline)" 2016,ASTM,"E2691-16 Standard Practice for Job Productivity Measurement" 2016,ASTM,"E2688-16 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics (Redline)" 2016,ASTM,"E2688-16 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics" 2016,ASTM,"E2672-16 Standard Practice for Identification and Categorization of Tooling (Redline)" 2016,ASTM,"E2672-16 Standard Practice for Identification and Categorization of Tooling" 2016,ASTM,"E2671-10(2016) Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property" 2016,ASTM,"E2599-16 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics (Redline)" 2016,ASTM,"E2599-16 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2016,ASTM,"E2587-16 Standard Practice for Use of Control Charts in Statistical Process Control (Redline)" 2016,ASTM,"F667/F667M-16 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)" 2016,ASTM,"F667/F667M-16 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings" 2016,ASTM,"E2587-16 Standard Practice for Use of Control Charts in Statistical Process Control" 2018,ASTM,"D6392-12(2018) Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods" 2017,ASTM,"D6390-11(2017) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures" 2018,ASTM,"D6388-18 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids" 2018,ASTM,"D6365-99(2018) Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test" 2018,ASTM,"D6364-06(2018) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics" 2017,ASTM,"D6270-17 Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 2018,ASTM,"D6244-06(2018) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains" 2018,ASTM,"D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2017,ASTM,"D6110-17 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2017,ASTM,"D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off" 2015,ASTM,"F667/F667M-15 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings" 2012,ASTM,"F667-12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings" 2016,ASTM,"E2557-16a Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments (Redline)" 2016,ASTM,"E2557-16a Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments" 2016,ASTM,"E2557-16 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments" 1996,ASTM,"E238-84(1996) Standard Test Method for Pin-Type Bearing Test of Metallic Materials" 2016,ASTM,"E2353-16 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades" 2017,ASTM,"D6103/D6103M-17 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)" 2017,ASTM,"D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core" 2016,ASTM,"E2336-16 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2013,ASTM,"D5918-13e1 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils" 2018,ASTM,"D5889/D5889M-18 Standard Practice for Quality Control of Geosynthetic Clay Liners" 2018,ASTM,"D5886-95(2018) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications" 2012,ASTM,"D5883-12e1 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 2018,ASTM,"D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells" 2013,ASTM,"E2334-09(2013)e2 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2016,ASTM,"E23-16b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Redline)" 2016,ASTM,"E23-16b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2016,ASTM,"E23-16a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2016,ASTM,"E23-16 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2012,ASTM,"F667-12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)" 1997,ASTM,"F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings" 2016,ASTM,"E2268-04(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference" 2006,ASTM,"E2265-06b Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2016,ASTM,"E2257-16 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies" 2016,ASTM,"E2249-02(2016) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity" 2016,ASTM,"E2187-16 Standard Test Method for Measuring the Ignition Strength of Cigarettes (Redline)" 2016,ASTM,"E2187-16 Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2016,ASTM,"E2179-03(2016) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors" 2016,ASTM,"E2168-10(2016) Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating" 2001,ASTM,"E2141-01 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units" 2016,ASTM,"E2131-16 Standard Practice for Addressing and Reporting Losses of Tangible Property (Redline)" 2016,ASTM,"E2131-16 Standard Practice for Addressing and Reporting Losses of Tangible Property" 2001,ASTM,"E2126-01 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings" 2001,ASTM,"E2121-01 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2016,ASTM,"E2120-10(2016) Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films" 2000,ASTM,"E2100-00 Standard Practice for Calculating the International Runway Friction Index" 2016,ASTM,"E2083-05(2016) Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit" 2001,ASTM,"E2061-01a Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 1999,ASTM,"E2030-99 Guide for Recommended Uses of Photoluminescent Safety Markings" 2016,ASTM,"E2026-16a Standard Guide for Seismic Risk Assessment of Buildings (Redline)" 2016,ASTM,"E2026-16a Standard Guide for Seismic Risk Assessment of Buildings" 2016,ASTM,"E2026-16 Standard Guide for Seismic Risk Assessment of Buildings" 2017,ASTM,"D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate" 2018,ASTM,"D5820-95(2018) Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes" 2018,ASTM,"D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability" 2018,ASTM,"D5818-11(2018) Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics" 2018,ASTM,"D5783-18 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2018,ASTM,"D5782-18 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2003,ASTM,"E1960-03e1 Standard Practice for Calculating International Friction Index of a Pavement Surface" 2006,ASTM,"F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings" 2015,ASTM,"F656-15 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings (Redline)" 1998,ASTM,"E1949-98 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2018,ASTM,"D5764-97a(2018) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products" 2018,ASTM,"D5753-18 Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging" 2018,ASTM,"D5721-08(2018) Standard Practice for Air-Oven Aging of Polyolefin Geomembranes" 2018,ASTM,"D5567-94(2018) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems" 2017,ASTM,"D5536-17 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties" 2018,ASTM,"D5514/D5514M-18 Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics" 2016,ASTM,"E1908-16 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) (Redline)" 2016,ASTM,"E1908-16 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)" 2015,ASTM,"E1876-15 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 1997,ASTM,"E1851-97 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures" 2016,ASTM,"E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management" 2015,ASTM,"E1830-15 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules " 1996,ASTM,"E1804-96 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project" 2015,ASTM,"F656-15 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 2018,ASTM,"D5494-93(2018) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes" 2017,ASTM,"D5457-17 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2018,ASTM,"D5456-18 Standard Specification for Evaluation of Structural Composite Lumber Products" 2017,ASTM,"D5447-17 Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem" 2017,ASTM,"D5404/D5404M-12(2017) Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator" 2010,ASTM,"F656-10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 1996,ASTM,"F656-96a Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 2008,ASTM,"F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 2016,ASTM,"E18-16 Standard Test Methods for Rockwell Hardness of Metallic Materials (Redline)" 2016,ASTM,"E18-16 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2002,ASTM,"F656-02 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings" 2016,ASTM,"E1796-03(2016) Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2012,ASTM,"F654-07(2012) Standard Specification for Residential Chain Link Fence Gates" 1998,ASTM,"F654-98 Standard Specification for Residential Chain Link Fence Gates" 2016,ASTM,"E1792-03(2016) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2016,ASTM,"E178-16 Standard Practice for Dealing With Outlying Observations" 2000,ASTM,"E178-00 Standard Practice for Dealing With Outlying Observations" 2016,ASTM,"E1776-16 Standard Guide for Development of Fire-Risk-Assessment Standards (Redline)" 2016,ASTM,"E1776-16 Standard Guide for Development of Fire-Risk-Assessment Standards" 2016,ASTM,"E1775-16 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead (Redline)" 2016,ASTM,"E1775-16 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead" 2007,ASTM,"F654-07 Standard Specification for Residential Chain Link Fence Gates" 2003,ASTM,"F654-03 Standard Specification for Residential Chain Link Fence Gates" 2016,ASTM,"E1765-16 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes (Redline)" 2016,ASTM,"E1765-16 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes" 2015,ASTM,"F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems (Redline)" 2015,ASTM,"F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2015,ASTM,"F645-15 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2012,ASTM,"F645-12 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems " 2012,ASTM,"F645-12a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2001,ASTM,"E1740-01 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 1999,ASTM,"E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques" 2017,ASTM,"D5319-17 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels" 2018,ASTM,"D5295/D5295M-18 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems" 2013,ASTM,"F645-13 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 2016,ASTM,"E1690-08(2016) Standard Test Method for Determination of Ethanol Extractives in Biomass" 2016,ASTM,"E1680-16 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems (Redline)" 2011,ASTM,"F645-11 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems" 1995,ASTM,"F645-95 Standard Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems" 2004,ASTM,"F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems" 2002,ASTM,"F645-02 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems" 2016,ASTM,"E1680-16 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems" 1991,ASTM,"F628-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core" 2016,ASTM,"E1645-16 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis (Redline)" 2016,ASTM,"E1645-16 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis" 2012,ASTM,"F628-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2012,ASTM,"F628-12e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2013,ASTM,"D5240/D5240M-12(2013)e1 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate" 2012,ASTM,"D5239-12e1 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization" 2018,ASTM,"D5141-11(2018) Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device" 2017,ASTM,"D5116-17 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products" 2015,ASTM,"D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring" 2017,ASTM,"D5034-09(2017) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)" 2017,ASTM,"D4956-17 Standard Specification for Retroreflective Sheeting for Traffic Control" 2017,ASTM,"D4945-17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations" 2018,ASTM,"D4944-18 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester" 2001,ASTM,"E1605-01b Standard Terminology Relating to Lead in Buildings" 2018,ASTM,"D4886-18 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)" 2018,ASTM,"D4885-01(2018) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method" 2016,ASTM,"D4832-16e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders" 2018,ASTM,"D4814-18a Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4814-18 Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4803-10(2018)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products" 2001,ASTM,"E1557-01 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2018,ASTM,"D4759-11(2018) Standard Practice for Determining the Specification Conformance of Geosynthetics" 2015,ASTM,"D4700-15 Standard Guide for Soil Sampling from the Vadose Zone" 2017,ASTM,"D4592-12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life" 2018,ASTM,"D4586/D4586M-07(2018) Standard Specification for Asphalt Roof Cement, Asbestos-Free" 2018,ASTM,"D4580/D4580M-12(2018) Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding" 2017,ASTM,"D4551-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane" 2014,ASTM,"D4546-14e1 Standard Test Methods for One-Dimensional Swell or Collapse of Soils" 2017,ASTM,"D4541-17 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers" 2013,ASTM,"D4535-13e2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer" 2013,ASTM,"D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air" 2017,ASTM,"D4505-12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life" 2018,ASTM,"D4479/D4479M-07(2018) Standard Specification for Asphalt Roof Coatings—Asbestos-Free" 2018,ASTM,"D4439-18 Standard Terminology for Geosynthetics" 2018,ASTM,"D4437/D4437M-16(2018) Standard Practice for Nondestructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes" 2018,ASTM,"D4427-18 Standard Classification of Peat Samples by Laboratory Testing" 1979,ASTM,"F628-79e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe Having A Foam Core" 2006,ASTM,"F628-06e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2008,ASTM,"F628-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2006,ASTM,"F628-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2018,ASTM,"D4404-18 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry" 2017,ASTM,"D4395-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method" 2017,ASTM,"D4394-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method" 2018,ASTM,"D4383-18 Standard Specification for Plowable, Raised Retroreflective Pavement Markers" 2018,ASTM,"D4355/D4355M-14(2018) Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus" 2001,ASTM,"E1474-01 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2016,ASTM,"E1444/E1444M-16e1 Standard Practice for Magnetic Particle Testing" 2016,ASTM,"E1444/E1444M-16 Standard Practice for Magnetic Particle Testing" 2016,ASTM,"E1354-16a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2016,ASTM,"E1354-16 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 1999,ASTM,"E1353-99 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture" 1996,ASTM,"E1337-90(1996) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire" 2017,ASTM,"D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils" 2016,ASTM,"E1325-16 Standard Terminology Relating to Design of Experiments" 2015,ASTM,"E1325-15 Standard Terminology Relating to Design of Experiments" 2016,ASTM,"E1289-08(2016) Standard Specification for Reference Specimen for Sound Transmission Loss" 2001,ASTM,"F628-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2000,ASTM,"F628-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2017,ASTM,"D4260-05(2017) Standard Practice for Liquid and Gelled Acid Etching of Concrete" 2016,ASTM,"E119-16a Standard Test Methods for Fire Tests of Building Construction and Materials" 2014,ASTM,"F626-14 Standard Specification for Fence Fittings (Redline)" 2014,ASTM,"F626-14 Standard Specification for Fence Fittings" 2013,ASTM,"F626-08(2013) Standard Specification for Fence Fittings" 2016,ASTM,"E119-16 Standard Test Methods for Fire Tests of Building Construction and Materials" 1996,ASTM,"F626-96a Standard Specification for Fence Fittings" 2003,ASTM,"F626-96a(2003) Standard Specification for Fence Fittings" 2008,ASTM,"F626-08 Standard Specification for Fence Fittings" 2015,ASTM,"F594-09(2015) Standard Specification for Stainless Steel Nuts" 2009,ASTM,"F594-09e1 Standard Specification for Stainless Steel Nuts" 2009,ASTM,"F594-09 Standard Specification for Stainless Steel Nuts" 1998,ASTM,"F594-98e1 Standard Specification for Stainless Steel Nuts" 1998,ASTM,"F594-98 Standard Specification for Stainless Steel Nuts" 2008,ASTM,"F594-08 Standard Specification for Stainless Steel Nuts" 2002,ASTM,"F594-02 Standard Specification for Stainless Steel Nuts" 2001,ASTM,"F594-01 Standard Specification for Stainless Steel Nuts" 2013,ASTM,"F593-13a Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2013,ASTM,"F593-13 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2008,ASTM,"F593-02(2008)e1 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs " 2002,ASTM,"F593-02e2 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2002,ASTM,"F593-02e1 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 1998,ASTM,"F593-98 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2008,ASTM,"F593-02(2008) Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2002,ASTM,"F593-02 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2001,ASTM,"F593-01 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs" 2017,ASTM,"D4258-05(2017) Standard Practice for Surface Cleaning Concrete for Coating" 2018,ASTM,"D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer" 2017,ASTM,"D4221-17 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer" 2017,ASTM,"D4216-17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds" 2012,ASTM,"D4186/D4186M-12e1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading" 2017,ASTM,"D4157-13(2017) Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)" 2018,ASTM,"D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions" 2017,ASTM,"D4104-17 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)" 2017,ASTM,"D4101-17 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials" 2014,ASTM,"F588-14 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact" 2018,ASTM,"D4014-03(2018) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges" 1997,ASTM,"F588-97 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact" 2007,ASTM,"F588-07 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact" 2004,ASTM,"F588-04 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact" 2014,ASTM,"F567-14a Standard Practice for Installation of Chain-Link Fence (Redline)" 2014,ASTM,"F567-14a Standard Practice for Installation of Chain-Link Fence" 2014,ASTM,"F567-14 Standard Practice for Installation of Chain-Link Fence" 2011,ASTM,"F567-11a Standard Practice for Installation of Chain-Link Fence" 2011,ASTM,"F567-11 Standard Practice for Installation of Chain-Link Fence" 2007,ASTM,"F567-07 Standard Practice for Installation of Chain-Link Fence" 2000,ASTM,"F567-00 Standard Practice for Installation of Chain-Link Fence" 2012,ASTM,"F547-06(2012) Standard Terminology of Nails for Use with Wood and Wood-Base Materials " 1995,ASTM,"F547-77(1995) Standard Terminology of Nails for Use with Wood and Wood-Base Materials" 2006,ASTM,"F547-06 Standard Terminology of Nails for Use with Wood and Wood-Base Materials" 2001,ASTM,"F547-01 Standard Terminology of Nails for Use with Wood and Wood-Base Materials" 2012,ASTM,"F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation (Redline)" 2012,ASTM,"F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation" 2001,ASTM,"F512-95(2001)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation" 2001,ASTM,"F512-95(2001) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation" 1995,ASTM,"F512-95 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation" 2006,ASTM,"F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation" 2013,ASTM,"F510/F510M-13 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method (Redline)" 2013,ASTM,"F510/F510M-13 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method" 2018,ASTM,"D3791/D3791M-11(2018) Standard Practice for Evaluating the Effects of Heat on Asphalts" 2014,ASTM,"F510/F510M-14 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method" 2008,ASTM,"F510-93(2008) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method" 2004,ASTM,"F510-93(2004) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method" 1999,ASTM,"F510-93(1999) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method" 2014,ASTM,"F493-14 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings" 2014,ASTM,"F493-14 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings (Redline)" 2010,ASTM,"F493-10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings" 1997,ASTM,"F493-97 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings" 2004,ASTM,"F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings" 2014,ASTM,"F481-97(2014) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields" 1997,ASTM,"F481-97 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields" 2008,ASTM,"F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields" 2002,ASTM,"F481-97(2002) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields" 2014,ASTM,"F480-14 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 (Redline)" 2014,ASTM,"F480-14 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2012,ASTM,"F480-12 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 " 2006,ASTM,"F480-06be1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2002,ASTM,"F480-02e1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2006,ASTM,"F480-06b Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2016,ASTM,"E1123-86(2016) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials" 2018,ASTM,"D3786/D3786M-18 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method" 2018,ASTM,"D3737-18 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)" 2017,ASTM,"D3665-12(2017) Standard Practice for Random Sampling of Construction Materials" 2017,ASTM,"D3567-17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings" 2017,ASTM,"D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer" 2017,ASTM,"D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils" 2017,ASTM,"D3549/D3549M-17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens" 2006,ASTM,"F480-06a Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2002,ASTM,"F480-02 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2000,ASTM,"F480-00 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80" 2014,ASTM,"F477-14 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2014,ASTM,"F477-14 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe (Redline)" 2010,ASTM,"F477-10 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2002,ASTM,"F477-02e1 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 1999,ASTM,"F477-99 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2008,ASTM,"F477-08 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2007,ASTM,"F477-07 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 2002,ASTM,"F477-02 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe" 1999,ASTM,"F462-79(1999) Consumer Safety Specification for Slip-Resistant Bathing Facilities" 2018,ASTM,"D3498-18e1 Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing" 2018,ASTM,"D3498-18 Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing" 2016,ASTM,"D3487-16e1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus" 2015,ASTM,"D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers" 2018,ASTM,"D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer" 2017,ASTM,"D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns" 2017,ASTM,"D3274-09(2017) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation" 2018,ASTM,"D3222-18 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials" 2014,ASTM,"F449-02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 2008,ASTM,"F449-02(2008) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 2002,ASTM,"F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 1997,ASTM,"F449-97 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 2002,ASTM,"F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control" 2004,ASTM,"F446-85(2004)e1 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area" 2009,ASTM,"F446-85(2009) Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area" 1999,ASTM,"F446-85(1999) Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area" 1999,ASTM,"F445-88(1999) Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas" 2004,ASTM,"F445-88(2004)e1 Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas" 2009,ASTM,"F445-88(2009) Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas" 2004,ASTM,"F444-88(2004)e1 Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas" 2009,ASTM,"F444-88(2009) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas" 1999,ASTM,"F444-88(1999) Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas" 2015,ASTM,"E11-15 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves" 2015,ASTM,"F441/F441M-15 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80" 2013,ASTM,"F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 (Redline)" 2013,ASTM,"D3213-13e1 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil" 2017,ASTM,"D3200-74(2017) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles" 2017,ASTM,"D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method" 2017,ASTM,"D3043-17 Standard Test Methods for Structural Panels in Flexure" 2017,ASTM,"D3018/D3018M-11(2017) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules" 2017,ASTM,"D2996-17 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe" 2018,ASTM,"D2992-18 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings" 2017,ASTM,"D2980-17e1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials" 2013,ASTM,"F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2012,ASTM,"F439-12 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2002,ASTM,"F439-02e1 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2011,ASTM,"F439-11 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2009,ASTM,"F439-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 1999,ASTM,"F439-99a Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2006,ASTM,"F439-06 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2005,ASTM,"F439-05 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2002,ASTM,"F439-02 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2015,ASTM,"D2978-15e1 Standard Test Methods for Volume of Processed Peat Materials" 2001,ASTM,"F439-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2018,ASTM,"D2946-01(2018) Standard Terminology for Asbestos and Asbestos–Cement Products" 2017,ASTM,"D2937-17e2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method" 2017,ASTM,"D2915-17 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products" 2017,ASTM,"D2899-12(2017) Standard Practice for Establishing Allowable Stresses for Round Timber Piles" 2018,ASTM,"D2880-18 Standard Specification for Gas Turbine Fuel Oils" 2017,ASTM,"D2863-17a Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)" 2017,ASTM,"D2863-17 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)" 2015,ASTM,"F438-15 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2002,ASTM,"F438-02 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2002,ASTM,"F438-02e1 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2009,ASTM,"F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 1999,ASTM,"F438-99 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2004,ASTM,"F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2001,ASTM,"F438-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40" 2015,ASTM,"F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 (Redline)" 2018,ASTM,"D2860/D2860M-18 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress" 2015,ASTM,"F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2009,ASTM,"F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2017,ASTM,"D2846/D2846M-17be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems" 2016,ASTM,"E105-16 Standard Practice for Probability Sampling of Materials" 1999,ASTM,"F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2006,ASTM,"F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80" 2017,ASTM,"D2846/D2846M-17b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems" 2017,ASTM,"D2846/D2846M-17a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems" 2018,ASTM,"D2844/D2844M-18 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils" 2018,ASTM,"D2824/D2824M-18 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos" 2018,ASTM,"D2805-11(2018) Standard Test Method for Hiding Power of Paints by Reflectometry" 2017,ASTM,"D2729-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings" 2014,ASTM,"D2661-14e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings" 2018,ASTM,"D2646-18 Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings" 2015,ASTM,"D2573/D2573M-15e1 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils" 2017,ASTM,"D2555-17a Standard Practice for Establishing Clear Wood Strength Values" 2011,ASTM,"F436M-11 Standard Specification for Hardened Steel Washers [Metric] (Redline)" 2010,ASTM,"F436M-10 Standard Specification for Hardened Steel Washers [Metric]" 2000,ASTM,"F436M-93(2000) Standard Specification for Hardened Steel Washers [Metric]" 2018,ASTM,"D2517-18 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings" 1996,ASTM,"E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials" 2009,ASTM,"F436M-09 Standard Specification for Hardened Steel Washers [Metric]" 2004,ASTM,"F436M-04 Standard Specification for Hardened Steel Washers [Metric]" 2003,ASTM,"F436M-03 Standard Specification for Hardened Steel Washers [Metric]" 2011,ASTM,"F436-11 Standard Specification for Hardened Steel Washers" 2010,ASTM,"F436-10 Standard Specification for Hardened Steel Washers" 2017,ASTM,"D2488-17e1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)" 2017,ASTM,"D2488-17 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)" 2011,ASTM,"F436-11 Standard Specification for Hardened Steel Washers (Redline)" 2016,ASTM,"E102/E102M-93(2016) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures" 2000,ASTM,"F436-93(2000) Standard Specification for Hardened Steel Washers" 2009,ASTM,"F436-09 Standard Specification for Hardened Steel Washers" 2007,ASTM,"F436-07a Standard Specification for Hardened Steel Washers" 2007,ASTM,"F436-07 Standard Specification for Hardened Steel Washers" 2017,ASTM,"D2487-17 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)" 2004,ASTM,"F436-04 Standard Specification for Hardened Steel Washers" 2003,ASTM,"F436-03 Standard Specification for Hardened Steel Washers" 2002,ASTM,"F436-02 Standard Specification for Hardened Steel Washers" 2012,ASTM,"F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings" 1999,ASTM,"F409-99a Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings" 2008,ASTM,"F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings" 2002,ASTM,"F409-02 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings" 2013,ASTM,"F405-13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Redline)" 1977,ASTM,"F405-77ae1 Standard Specification for Corrugated Polyethylene (PE) Tubing And Fittings" 1997,ASTM,"F405-97 Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings" 2005,ASTM,"F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings" 2012,ASTM,"F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings" 1999,ASTM,"F402-93(1999) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings" 2005,ASTM,"F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings" 1993,ASTM,"F386-93 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer" 2008,ASTM,"F386-02(2008) Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces" 2017,ASTM,"D2444-17 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)" 2017,ASTM,"D2399-12(2017)e1 Standard Practice for Selection of Cutback Asphalts" 2011,ASTM,"F386-11 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces" 2002,ASTM,"F386-02 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces" 2013,ASTM,"F37-06(2013) Standard Test Methods for Sealability of Gasket Materials" 2006,ASTM,"F37-06 Standard Test Methods for Sealability of Gasket Materials (Redline)" 2006,ASTM,"F37-06 Standard Test Methods for Sealability of Gasket Materials" 2017,ASTM,"D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials" 2000,ASTM,"F37-00 Standard Test Methods for Sealability of Gasket Materials" 2015,ASTM,"F36-15 Standard Test Method for Compressibility and Recovery of Gasket Materials (Redline)" 2015,ASTM,"F36-15 Standard Test Method for Compressibility and Recovery of Gasket Materials" 2003,ASTM,"F36-99(2003) Standard Test Method for Compressibility and Recovery of Gasket Materials" 1999,ASTM,"F36-99 Standard Test Method for Compressibility and Recovery of Gasket Materials" 2009,ASTM,"F36-99(2009) Standard Test Method for Compressibility and Recovery of Gasket Materials" 2014,ASTM,"F3095-14 Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System" 2014,ASTM,"F3092-14 Standard Terminology Relating to Optical Fiber Sensing Systems" 2014,ASTM,"F3080-14 Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector and CCTV Camera System" 2014,ASTM,"F3079-14 Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities" 2013,ASTM,"F3035-13 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft" 2015,ASTM,"F2972-15 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System (Redline)" 2015,ASTM,"F2972-15 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System" 2014,ASTM,"F2972-14 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System" 2014,ASTM,"F2972-14e1 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System" 2015,ASTM,"F2930-15 Standard Guide for Compliance with Light Sport Aircraft Standards" 2014,ASTM,"F2930-14a Standard Guide for Compliance with Light Sport Aircraft Standards" 2014,ASTM,"F2930-14 Standard Guide for Compliance with Light Sport Aircraft Standards" 2013,ASTM,"F2930-13 Standard Guide for Compliance with Light Sport Aircraft Standards" 2012,ASTM,"F2930-12 Standard Guide for Compliance with Light Sport Aircraft Standards" 2014,ASTM,"F2840-14 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft" 2017,ASTM,"D2394-17 Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring" 2014,ASTM,"F2840-14 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft (Redline)" 2011,ASTM,"F2840-11 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft" 2011,ASTM,"F2839-11 Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft" 2009,ASTM,"F2769-09 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems" 2010,ASTM,"F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems" 2014,ASTM,"F2746-14 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane" 2014,ASTM,"F2746-14 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane (Redline)" 2015,ASTM,"F2745-15 Standard Specification for Required Product Information to be Provided with an Airplane (Redline)" 2018,ASTM,"D2321-18 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications" 2017,ASTM,"D2261-13(2017)e1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)" 2018,ASTM,"D2248-01a(2018) Standard Practice for Detergent Resistance of Organic Finishes" 2015,ASTM,"D2240-15e1 Standard Test Method for Rubber Property—Durometer Hardness" 2018,ASTM,"D2203-01(2018) Standard Test Method for Staining from Sealants" 2017,ASTM,"D2172/D2172M-17e1 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures" 2015,ASTM,"F2745-15 Standard Specification for Required Product Information to be Provided with an Airplane" 2011,ASTM,"F2745-11 Standard Specification for Required Product Information to be Provided with an Airplane" 2008,ASTM,"F2735-08 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2008,ASTM,"F2735-08a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2009,ASTM,"F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing (Redline)" 2009,ASTM,"F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2015,ASTM,"F2656/F2656M-15 Standard Test Method for Crash Testing of Vehicle Security Barriers (Redline)" 2015,ASTM,"F2656/F2656M-15 Standard Test Method for Crash Testing of Vehicle Security Barriers" 2007,ASTM,"F2656-07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers" 2012,ASTM,"F2626-12 Standard Terminology for Light Sport Aircraft (Redline)" 2017,ASTM,"D2152-17 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion" 2012,ASTM,"F2626-12 Standard Terminology for Light Sport Aircraft" 2007,ASTM,"F2626-07 Standard Terminology for Light Sport Aircraft" 2008,ASTM,"F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing (Redline)" 2008,ASTM,"F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing" 2007,ASTM,"F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing" 2017,ASTM,"D2047-17 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine" 2015,ASTM,"F2611-15 Standard Guide for Design and Construction of Chain Link Security Fencing (Redline)" 2018,ASTM,"D1987-18 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters" 2017,ASTM,"D1970/D1970M-17a Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection" 2016,ASTM,"D93-16 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2015,ASTM,"F2611-15 Standard Guide for Design and Construction of Chain Link Security Fencing" 2018,ASTM,"D1863/D1863M-05(2018) Standard Specification for Mineral Aggregate Used on Built-Up Roofs" 2011,ASTM,"F2611-11 Standard Guide for Design and Construction of Chain Link Security Fencing" 2006,ASTM,"F2611-06 Standard Guide for Design and Construction of Chain Link Security Fencing" 2000,ASTM,"D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester" 2006,ASTM,"F2592-06 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2017,ASTM,"D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method" 2015,ASTM,"D1785-15e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120" 2007,ASTM,"F2592-07 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2007,ASTM,"F2592-07a Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2010,ASTM,"F2592-10 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2009,ASTM,"F2592-09 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2008,ASTM,"F2592-08 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch" 2014,ASTM,"F2564-14 Standard Specification for Design and Performance of a Light Sport Glider" 2014,ASTM,"F2564-14 Standard Specification for Design and Performance of a Light Sport Glider (Redline)" 2013,ASTM,"F2564-13 Standard Specification for Design and Performance of a Light Sport Glider" 2016,ASTM,"D92-16 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2006,ASTM,"F2564-06 Standard Specification for Design and Performance of a Light Sport Glider" 2010,ASTM,"F2564-10 Standard Specification for Design and Performance of a Light Sport Glider" 2011,ASTM,"F2564-11 Standard Specification for Design and Performance of a Light Sport Glider" 2010,ASTM,"F2563-06(2010) Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation" 2006,ASTM,"F2563-06 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation" 1992,ASTM,"D92-92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 2009,ASTM,"F2551-09 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes" 2013,ASTM,"F2550-13 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall (Redline)" 2013,ASTM,"F2550-13 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall" 2006,ASTM,"F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall" 2007,ASTM,"F2538-07 Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft" 2010,ASTM,"F2538-07a(2010) Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft" 2007,ASTM,"F2538-07a Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft" 2018,ASTM,"D1743-13(2018) Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases" 2015,ASTM,"F2519-05(2015) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors" 2018,ASTM,"D1683/D1683M-17(2018) Standard Test Method for Failure in Sewn Seams of Woven Fabrics" 2011,ASTM,"F2519-05(2011)e1 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors" 2011,ASTM,"F2519-05(2011) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors " 2005,ASTM,"F2519-05 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors" 2015,ASTM,"F2509-15 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing (Redline)" 2015,ASTM,"F2509-15 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing" 2012,ASTM,"F2509-12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2012,ASTM,"F2509-06(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2006,ASTM,"F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2015,ASTM,"F2507-15 Standard Specification for Recreational Airpark Design (Redline)" 2015,ASTM,"F2507-15 Standard Specification for Recreational Airpark Design" 2010,ASTM,"F2507-05(2010) Standard Specification for Recreational Airpark Design" 2005,ASTM,"F2507-05 Standard Specification for Recreational Airpark Design" 2013,ASTM,"F2506-13 Standard Specification for Design and Testing of Light Sport Aircraft Propellers (Redline)" 2013,ASTM,"F2506-13 Standard Specification for Design and Testing of Light Sport Aircraft Propellers" 2010,ASTM,"F2506-10e1 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers" 2010,ASTM,"F2506-10 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers" 2007,ASTM,"F2506-07 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers" 2012,ASTM,"F2483-12 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft (Redline)" 2012,ASTM,"F2483-12 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft" 2005,ASTM,"F2483-05 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft" 2015,ASTM,"F2462-05(2015) Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems" 2010,ASTM,"F2462-05(2010) Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems" 2005,ASTM,"F2462-05 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems" 2005,ASTM,"F2457-05 Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft" 2007,ASTM,"F2457-05(2007) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft" 2009,ASTM,"F2457-05(2009) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft" 2010,ASTM,"F2454-05(2010) Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting" 2005,ASTM,"F2454-05 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting" 2005,ASTM,"F2447-05 Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft" 2007,ASTM,"F2447-05(2007) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft" 2009,ASTM,"F2447-05(2009) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft" 2014,ASTM,"F2434-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2014,ASTM,"F2434-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing (Redline)" 2005,ASTM,"F2434-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2009,ASTM,"F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2008,ASTM,"F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2004,ASTM,"F2434-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2013,ASTM,"F2427-05a(2013) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2017,ASTM,"D1683/D1683M-17e1 Standard Test Method for Failure in Sewn Seams of Woven Fabrics" 2004,ASTM,"F2427-04 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2427-05 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2427-05a Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2010,ASTM,"F2427-05a(2010) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2008,ASTM,"F2427-05a(2008) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft" 2013,ASTM,"F2426-13 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft (Redline)" 2013,ASTM,"F2426-13 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft" 2004,ASTM,"F2426-04 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft" 2005,ASTM,"F2426-05 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft" 2017,ASTM,"D1676-17 Standard Test Methods for Film-Insulated Magnet Wire" 2005,ASTM,"F2426-05a Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft" 2008,ASTM,"F2426-05a(2008) Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft" 2005,ASTM,"F2425-05 Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft" 2005,ASTM,"F2425-05a Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft" 2007,ASTM,"F2425-05a(2007) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft" 2009,ASTM,"F2425-05a(2009) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft (Redline)" 2009,ASTM,"F2425-05a(2009) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft" 2014,ASTM,"F2415-14 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2014,ASTM,"F2415-14 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft (Redline)" 2004,ASTM,"F2415-04 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2016,ASTM,"D859-16 Standard Test Method for Silica in Water" 2004,ASTM,"F2415-04a Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2005,ASTM,"F2415-05 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2006,ASTM,"F2415-06 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2008,ASTM,"F2415-06(2008) Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2009,ASTM,"F2415-09 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft" 2009,ASTM,"F2414-04(2009) Standard Practice for Sealing Sewer Manholes Using Chemical Grouting" 2004,ASTM,"F2414-04 Standard Practice for Sealing Sewer Manholes Using Chemical Grouting" 2016,ASTM,"F2408-16 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets (Redline)" 2016,ASTM,"F2408-16 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets" 2011,ASTM,"F2408-11 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets" 2004,ASTM,"F2408-04 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular" 2006,ASTM,"F2408-06 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets" 2007,ASTM,"F2408-07 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets" 2009,ASTM,"F2408-09 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets" 2017,ASTM,"D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)" 2015,ASTM,"F2389-15 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2007,ASTM,"F2389-07e1 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2010,ASTM,"F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2007,ASTM,"F2389-07 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2006,ASTM,"F2389-06 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2005,ASTM,"F2389-05 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2004,ASTM,"F2389-04 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems" 2013,ASTM,"F2356-05a(2013) Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2356-05 Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2016,ASTM,"D852-16 Standard Test Method for Solidification Point of Benzene" 2004,ASTM,"F2356-04 Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2356-05a Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2010,ASTM,"F2356-05a(2010) Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2008,ASTM,"F2356-05a(2008) Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft" 2014,ASTM,"F2355-14 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2014,ASTM,"F2355-14 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft (Redline)" 2016,ASTM,"D850-16 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2013,ASTM,"F2355-13 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2012,ASTM,"F2355-12 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2016,ASTM,"D847-16 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 2016,ASTM,"D843-16 Standard Specification for Nitration Grade Xylene" 2005,ASTM,"F2355-05 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2355-05a Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2000,ASTM,"D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)" 2008,ASTM,"F2355-05a(2008) Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2010,ASTM,"F2355-10 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft" 2013,ASTM,"F2354-05b(2013) Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2004,ASTM,"F2354-04 Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2354-05 Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2354-05a Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2005,ASTM,"F2354-05b Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2010,ASTM,"F2354-05b(2010) Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2008,ASTM,"F2354-05b(2008) Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft" 2014,ASTM,"F2352-14 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2014,ASTM,"F2352-14 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft (Redline)" 2004,ASTM,"F2352-04 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2004,ASTM,"F2352-04a Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2005,ASTM,"F2352-05 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2008,ASTM,"F2352-05(2008) Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2017,ASTM,"D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders" 2011,ASTM,"F2352-11 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2009,ASTM,"F2352-09 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft" 2004,ASTM,"F2350-04 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems" 2017,ASTM,"D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory" 2004,ASTM,"F2349-04 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems" 2018,ASTM,"D1600-18 Standard Terminology for Abbreviated Terms Relating to Plastics" 2004,ASTM,"F2339-04 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft" 2005,ASTM,"F2339-05 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft" 2006,ASTM,"F2339-06 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft" 2009,ASTM,"F2339-06(2009) Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft (Redline)" 2009,ASTM,"F2339-06(2009) Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft" 2013,ASTM,"F2329-13 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners (Redline)" 2013,ASTM,"F2329-13 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners" 2011,ASTM,"F2329-05(2011) Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners" 2011,ASTM,"F2329-11 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners" 2005,ASTM,"F2329-05 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners" 2014,ASTM,"F2316-12(2014) Standard Specification for Airframe Emergency Parachutes" 2012,ASTM,"F2316-12 Standard Specification for Airframe Emergency Parachutes (Redline)" 2012,ASTM,"F2316-12 Standard Specification for Airframe Emergency Parachutes" 2003,ASTM,"F2316-03 Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft" 2006,ASTM,"F2316-06 Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft" 2010,ASTM,"F2316-08(2010) Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft" 2008,ASTM,"F2316-08 Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft" 2014,ASTM,"F2306/F2306M-14e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications" 2014,ASTM,"F2306/F2306M-14 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications" 2014,ASTM,"F2306/F2306M-14 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications (Redline)" 2010,ASTM,"F2304-10 Standard Practice for Sealing of Sewers Using Chemical Grouting (Redline)" 2010,ASTM,"F2304-10 Standard Practice for Sealing of Sewers Using Chemical Grouting" 2003,ASTM,"F2304-03 Standard Practice for Rehabilitation of Sewers Using Chemical Grouting" 2015,ASTM,"F2303-03(2015) Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits" 2009,ASTM,"F2303-03(2009) Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits" 2003,ASTM,"F2303-03 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits" 2003,ASTM,"F2295-03 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Airplane" 2006,ASTM,"F2295-06 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft" 2018,ASTM,"D1535-14(2018) Standard Practice for Specifying Color by the Munsell System" 2010,ASTM,"F2295-10 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft" 2010,ASTM,"F2285-04(2010) Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use" 2004,ASTM,"F2285-04 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use" 2014,ASTM,"D7748/D7748M-14e1 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products" 2017,ASTM,"D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics" 2005,ASTM,"F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9" 2016,ASTM,"D76/D76M-11(2016) Standard Specification for Tensile Testing Machines for Textiles" 2016,ASTM,"D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal (Redline)" 2016,ASTM,"D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal" 2004,ASTM,"F2262-04 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9" 2016,ASTM,"D7536-16 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry (Redline)" 2016,ASTM,"D7536-16 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry" 2017,ASTM,"D1525-17 Standard Test Method for Vicat Softening Temperature of Plastics" 2003,ASTM,"F2262-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9" 2018,ASTM,"D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique" 2015,ASTM,"F2245-15 Standard Specification for Design and Performance of a Light Sport Airplane" 2014,ASTM,"F2245-14 Standard Specification for Design and Performance of a Light Sport Airplane" 2017,ASTM,"D1500-12(2017) Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)" 2013,ASTM,"F2245-13b Standard Specification for Design and Performance of a Light Sport Airplane" 2013,ASTM,"F2245-13a Standard Specification for Design and Performance of a Light Sport Airplane" 2012,ASTM,"F2245-12d Standard Specification for Design and Performance of a Light Sport Airplane" 2013,ASTM,"F2245-13 Standard Specification for Design and Performance of a Light Sport Airplane" 2012,ASTM,"F2245-12 Standard Specification for Design and Performance of a Light Sport Airplane" 2012,ASTM,"F2245-12a Standard Specification for Design and Performance of a Light Sport Airplane" 2012,ASTM,"F2245-12b Standard Specification for Design and Performance of a Light Sport Airplane" 2012,ASTM,"F2245-12c Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"D7492/D7492M-16 Standard Guide for Use of Drainage System Media with Waterproofing Systems" 2004,ASTM,"F2245-04 Standard Specification for Design and Performance of a Light Sport Airplane" 2006,ASTM,"F2245-06 Standard Specification for Design and Performance of a Light Sport Airplane" 2007,ASTM,"F2245-07a Standard Specification for Design and Performance of a Light Sport Airplane" 2008,ASTM,"F2245-08 Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer" 2009,ASTM,"F2245-09 Standard Specification for Design and Performance of a Light Sport Airplane" 2010,ASTM,"F2245-10a Standard Specification for Design and Performance of a Light Sport Airplane" 2010,ASTM,"F2245-10c Standard Specification for Design and Performance of a Light Sport Airplane" 2011,ASTM,"F2245-11 Standard Specification for Design and Performance of a Light Sport Airplane" 2010,ASTM,"F2245-10 Standard Specification for Design and Performance of a Light Sport Airplane" 2007,ASTM,"F2245-07 Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"D737-04(2016) Standard Test Method for Air Permeability of Textile Fabrics" 2010,ASTM,"F2245-10b Standard Specification for Design and Performance of a Light Sport Airplane" 2016,ASTM,"D7322-16 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions" 2016,ASTM,"D7277-16 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow (Redline)" 2016,ASTM,"D7277-16 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow" 2016,ASTM,"D7276-16 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow (Redline)" 2014,ASTM,"F2244-14 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2016,ASTM,"D7276-16 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow" 2016,ASTM,"D7262-10(2016)e1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids" 2014,ASTM,"F2244-14 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft (Redline)" 2017,ASTM,"D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels" 2013,ASTM,"F2244-13 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2003,ASTM,"F2244-03 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2005,ASTM,"F2244-05 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2016,ASTM,"D7185-16 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2016,ASTM,"D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence (Redline)" 2008,ASTM,"F2244-08 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2010,ASTM,"F2244-10 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft" 2013,ASTM,"F2243-11(2013) Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft" 2016,ASTM,"D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" 2003,ASTM,"F2243-03 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft" 2005,ASTM,"F2243-05 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft" 2016,ASTM,"D7178-16e1 Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property" 2011,ASTM,"F2243-11 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft" 2016,ASTM,"D7178-16 Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property" 2013,ASTM,"F2242-05(2013) Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft" 2003,ASTM,"F2242-03 Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft" 2016,ASTM,"D7158/D7158M-16 Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)" 2016,ASTM,"D7124-16 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2016,ASTM,"D7116-16 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements" 2005,ASTM,"F2242-05 Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft" 2008,ASTM,"F2242-05(2008) Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft" 2014,ASTM,"F2241-14 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2016,ASTM,"D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods" 2014,ASTM,"F2241-14 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft (Redline)" 2013,ASTM,"F2241-13 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2003,ASTM,"F2241-03 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2005,ASTM,"F2241-05 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2005,ASTM,"F2241-05a Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2008,ASTM,"F2241-05a(2008) Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft" 2015,ASTM,"F2233-03(2015) Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers" 2009,ASTM,"F2233-03(2009) Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers" 2003,ASTM,"F2233-03 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers" 2016,ASTM,"D709-16 Standard Specification for Laminated Thermosetting Materials" 2002,ASTM,"F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock" 2011,ASTM,"F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock" 2010,ASTM,"F2206-02(2010) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock" 2013,ASTM,"F2200-13e1 Standard Specification for Automated Vehicular Gate Construction" 2017,ASTM,"D1335-17e1 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings" 2014,ASTM,"F2200-14 Standard Specification for Automated Vehicular Gate Construction" 2017,ASTM,"D1335-17 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings" 2013,ASTM,"F2200-13 Standard Specification for Automated Vehicular Gate Construction" 2011,ASTM,"F2200-11 Standard Specification for Automated Vehicular Gate Construction" 2011,ASTM,"F2200-11a Standard Specification for Automated Vehicular Gate Construction" 2011,ASTM,"F2200-11b Standard Specification for Automated Vehicular Gate Construction" 2005,ASTM,"F2200-05 Standard Specification for Automated Vehicular Gate Construction" 2002,ASTM,"F2200-02 Standard Specification for Automated Vehicular Gate Construction" 2013,ASTM,"F2195-13 Standard Specification for Linoleum Floor Tile" 2002,ASTM,"F2195-02 Standard Specification for Linoleum Floor Tile" 2003,ASTM,"F2195-03 Standard Specification for Linoleum Floor Tile" 2003,ASTM,"F2195-03e1 Standard Specification for Linoleum Floor Tile" 2007,ASTM,"F2195-07 Standard Specification for Linoleum Floor Tile" 2016,ASTM,"D6992-16 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method (Redline)" 2016,ASTM,"D6992-16 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2013,ASTM,"F218-13 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass" 2012,ASTM,"F218-12 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass " 2016,ASTM,"D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer (Redline)" 2016,ASTM,"D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer" 2005,ASTM,"F218-05 Standard Test Method for Analyzing Stress in Glass" 2000,ASTM,"F218-95(2000) Standard Test Method for Analyzing Stress in Glass" 1995,ASTM,"F218-95 Standard Test Method for Analyzing Stress in Glass" 2011,ASTM,"F2170-11 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 2016,ASTM,"D6934-08(2016) Standard Test Method for Residue by Evaporation of Emulsified Asphalt" 2009,ASTM,"F2170-09 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 2002,ASTM,"F2170-02 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes" 2014,ASTM,"F2169-14 Standard Specification for Resilient Stair Treads" 2016,ASTM,"D6917-16 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) (Redline)" 2015,ASTM,"F2169-15 Standard Specification for Resilient Stair Treads (Redline)" 2016,ASTM,"D6917-16 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)" 2015,ASTM,"F2169-15 Standard Specification for Resilient Stair Treads" 2012,ASTM,"F2169-12 Standard Specification for Resilient Stair Treads" 2002,ASTM,"F2169-02 Standard Specification for Resilient Stair Treads" 2008,ASTM,"F2169-02(2008) Standard Specification for Resilient Stair Treads" 2013,ASTM,"F2165-13 Standard Specification for Flexible Pre-Insulated Piping" 2002,ASTM,"F2165-02 Standard Specification for Flexible Pre-Insulated Piping" 2008,ASTM,"F2165-02(2008) Standard Specification for Flexible Pre-Insulated Piping" 2014,ASTM,"F2159-14 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2003,ASTM,"F2159-03e1 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2016,ASTM,"D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis (Redline)" 2016,ASTM,"D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2011,ASTM,"F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2010,ASTM,"F2159-10 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2009,ASTM,"F2159-09 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2005,ASTM,"F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2016,ASTM,"D6841-16 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber (Redline)" 2016,ASTM,"D6841-16 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2003,ASTM,"F2159-03 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F2159-02 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2001,ASTM,"F2159-01 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2013,ASTM,"F2158-08(2013) Standard Specification for Residential Central-Vacuum Tube and Fittings" 2001,ASTM,"F2158-01 Standard Specification for Residential Central-Vacuum Tube and Fittings" 2008,ASTM,"F2158-08 Standard Specification for Residential Central-Vacuum Tube and Fittings" 2011,ASTM,"F2130-11 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials" 2009,ASTM,"F2130-09 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials" 2001,ASTM,"F2130-01 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials" 2015,ASTM,"F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings (Redline)" 2015,ASTM,"F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings" 2004,ASTM,"F2098-04e1 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings" 2008,ASTM,"F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings" 2016,ASTM,"D6805-02(2016) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions" 2016,ASTM,"D6796-16 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies (Redline)" 2004,ASTM,"F2098-04 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings" 2001,ASTM,"F2098-01 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings" 2018,ASTM,"D1293-18 Standard Test Methods for pH of Water" 2013,ASTM,"F2090-13 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2016,ASTM,"D6796-16 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies" 2001,ASTM,"F2090-01 Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2010,ASTM,"F2090-10 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2008,ASTM,"F2090-08 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2007,ASTM,"F2090-01a(2007) Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2016,ASTM,"D6773-16 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester (Redline)" 2016,ASTM,"D6773-16 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester" 2001,ASTM,"F2090-01a Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms" 2015,ASTM,"F2080-15a Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe" 2015,ASTM,"F2080-15 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2012,ASTM,"F2080-12e1 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2012,ASTM,"F2080-12 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2016,ASTM,"D6753/D6753M-02(2016) Standard Specification for Coal Tar Adhesive" 2004,ASTM,"F2080-04 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2009,ASTM,"F2080-09 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2008,ASTM,"F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2005,ASTM,"F2080-05 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2002,ASTM,"F2080-02 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2001,ASTM,"F2080-01 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe" 2015,ASTM,"F2075-15 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2010,ASTM,"F2075-10a Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment (Redline)" 2010,ASTM,"F2075-10a Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2004,ASTM,"F2075-04e1 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2010,ASTM,"F2075-10 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2018,ASTM,"D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)" 2004,ASTM,"F2075-04 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2001,ASTM,"F2075-01a Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2001,ASTM,"F2075-01 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment" 2018,ASTM,"D1193-06(2018) Standard Specification for Reagent Water" 2014,ASTM,"F2072-14 Standard Test Method for Hosedown of a Membrane Switch (Redline)" 2014,ASTM,"F2072-14 Standard Test Method for Hosedown of a Membrane Switch" 2007,ASTM,"F2072-01(2007) Standard Practice for Hosedown of a Membrane Switch" 2001,ASTM,"F2072-01 Standard Practice for Hosedown of a Membrane Switch" 2000,ASTM,"F2072-00 Standard Practice for Hosedown of a Membrane Switch" 2000,ASTM,"F2055-00 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method" 2008,ASTM,"F2055-00(2008) Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method" 2017,ASTM,"D1126-17 Standard Test Method for Hardness in Water" 2016,ASTM,"D6708-16a Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2010,ASTM,"F2055-10 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method" 2009,ASTM,"F2055-09 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method" 2013,ASTM,"F2034-08(2013) Standard Specification for Sheet Linoleum Floor Covering" 2000,ASTM,"F2034-00 Standard Specification for Sheet Linoleum Floor Covering" 2001,ASTM,"F2034-01 Standard Specification for Sheet Linoleum Floor Covering" 2003,ASTM,"F2034-03 Standard Specification for Sheet Linoleum Floor Covering" 2003,ASTM,"F2034-03e1 Standard Specification for Sheet Linoleum Floor Covering" 2008,ASTM,"F2034-08 Standard Specification for Sheet Linoleum Floor Covering (Redline)" 2008,ASTM,"F2034-08 Standard Specification for Sheet Linoleum Floor Covering" 2013,ASTM,"F2014-00(2013) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications" 2006,ASTM,"F2014-00(2006) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications" 2000,ASTM,"F2014-00 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications" 2016,ASTM,"D6643-01(2016) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance" 2000,ASTM,"D6600-00e1 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2013,ASTM,"D6572-13e2 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2017,ASTM,"D1036-99(2017) Standard Test Methods of Static Tests of Wood Poles" 2018,ASTM,"D1014-18 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates" 2000,ASTM,"F2006-00 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2016,ASTM,"D6525/D6525M-16 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products" 2005,ASTM,"F2006-00(2005) Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2010,ASTM,"F2006-10 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2008,ASTM,"F2006-08 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows" 2016,ASTM,"D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 2014,ASTM,"F1996-14 Standard Test Method for Silver Migration for Membrane Switch Circuitry" 2014,ASTM,"F1996-14 Standard Test Method for Silver Migration for Membrane Switch Circuitry (Redline)" 2006,ASTM,"F1996-06 Standard Test Method for Silver Migration for Membrane Switch Circuitry" 2001,ASTM,"F1996-01 Standard Test Method for Silver Migration for Membrane Switch Circuitry" 2000,ASTM,"F1996-00 Standard Test Method for Silver Migration for Membrane Switch Circuitry" 2013,ASTM,"F1995-13 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch (Redline)" 2013,ASTM,"F1995-13 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch" 2000,ASTM,"F1995-00 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch" 2005,ASTM,"F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch" 2012,ASTM,"F1995-12 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch" 2001,ASTM,"F1986-01 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems" 2011,ASTM,"F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems" 2006,ASTM,"F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems" 2000,ASTM,"F1986-00a Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems" 2015,ASTM,"F1974-09(2015) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2001,ASTM,"F1974-01e1 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2016,ASTM,"D6389-99(2016) Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids" 2001,ASTM,"F1974-01e2 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2004,ASTM,"F1974-04 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2016,ASTM,"D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method (Redline)" 2016,ASTM,"D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method" 2009,ASTM,"F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe (Redline)" 2016,ASTM,"D6300-16 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 1999,ASTM,"D6300-99 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2000,ASTM,"D6299-00a Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance" 2009,ASTM,"F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2008,ASTM,"F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2002,ASTM,"F1974-02 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2001,ASTM,"F1974-01 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2000,ASTM,"F1974-00a Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe" 2013,ASTM,"F1973-13e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 2013,ASTM,"F1973-13 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems (Redline)" 2013,ASTM,"F1973-13 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 2012,ASTM,"F1973-12 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 1999,ASTM,"F1973-99e2 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems" 1999,ASTM,"F1973-99e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems" 1999,ASTM,"F1973-99 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems" 2008,ASTM,"F1973-08 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems" 2018,ASTM,"D975-18 Standard Specification for Diesel Fuel Oils" 2005,ASTM,"F1973-05 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems" 2002,ASTM,"F1973-02 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems" 2012,ASTM,"F1970-12e1 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 2012,ASTM,"F1970-12 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 1999,ASTM,"F1970-99 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 2001,ASTM,"F1970-01 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 2005,ASTM,"F1970-05 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems" 2002,ASTM,"F1961-02 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing" 2002,ASTM,"F1961-02a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing" 2016,ASTM,"D6142-16 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography (Redline)" 2002,ASTM,"F1961-02e1 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing" 2009,ASTM,"F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing (Redline)" 2016,ASTM,"D6142-16 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography" 2017,ASTM,"D975-17a Standard Specification for Diesel Fuel Oils" 2014,ASTM,"F1960-14 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2014,ASTM,"F1960-14a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2015,ASTM,"F1960-15 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2015,ASTM,"F1960-15 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing (Redline)" 2012,ASTM,"F1960-12 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2016,ASTM,"D6128-16 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester (Redline)" 2000,ASTM,"F1960-00e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2016,ASTM,"D6128-16 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester" 2011,ASTM,"F1960-11e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2011,ASTM,"F1960-11 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2016,ASTM,"D6117-16 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes (Redline)" 2016,ASTM,"D6117-16 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes" 2010,ASTM,"F1960-10 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2009,ASTM,"F1960-09a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2009,ASTM,"F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2008,ASTM,"F1960-08 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2007,ASTM,"F1960-07a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene" 2007,ASTM,"F1960-07 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2005,ASTM,"F1960-05 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2003,ASTM,"F1960-03 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F1960-02b Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F1960-02a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F1960-02 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2000,ASTM,"F1960-00 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing" 2014,ASTM,"F1951-14 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment (Redline)" 2014,ASTM,"F1951-14 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 1999,ASTM,"F1951-99 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 2009,ASTM,"F1951-09b Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 2009,ASTM,"F1951-09a Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 2009,ASTM,"F1951-09 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 2008,ASTM,"F1951-08 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment" 2015,ASTM,"F1948-15 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing (Redline)" 2015,ASTM,"F1948-15 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 2012,ASTM,"F1948-12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 1999,ASTM,"F1948-99ae1 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 2011,ASTM,"F1948-05(2011) Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 2005,ASTM,"F1948-05 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 2016,ASTM,"D6088-06(2016) Standard Practice for Installation of Geocomposite Pavement Drains" 1999,ASTM,"F1948-99a Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing" 1996,ASTM,"D6036-96e1 Standard Guide for Displaying the Results of Chemical Analysis of Ground Water for Major Ions and Trace Elements-Use of Maps" 2016,ASTM,"D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code (Redline)" 2016,ASTM,"D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code" 1996,ASTM,"D6030-96e1 Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability" 1996,ASTM,"D6026-96 Standard Practice for Using Significant Digits in Geotechnical Data" 2017,ASTM,"D903-98(2017) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds" 1996,ASTM,"D6025-96e1 Standard Guide for Developing and Evaluating Ground-Water Modeling Codes" 1996,ASTM,"D6000-96e1 Standard Guide for Presentation of Water-Level Information From Ground-Water Sites" 1996,ASTM,"D5981-96e1 Standard Guide for Calibrating a Ground-Water Flow Model Application" 1996,ASTM,"D5979-96e1 Standard Guide for Conceptualization and Characterization of Ground-Water Systems" 2000,ASTM,"F1941M-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]" 2005,ASTM,"F1941M-05 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]" 2007,ASTM,"F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Redline)" 1999,ASTM,"D5917-99 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2016,ASTM,"D5893/D5893M-16 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements (Redline)" 2016,ASTM,"D5893/D5893M-16 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements" 2001,ASTM,"D5891-01 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners" 2006,ASTM,"F1941-00(2006) Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))" 2000,ASTM,"F1941-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))" 2001,ASTM,"D5890-01 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2016,ASTM,"D5888-06(2016) Standard Guide for Storage and Handling of Geosynthetic Clay Liners" 1996,ASTM,"D5883-96e1 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 2016,ASTM,"D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations (Redline)" 2016,ASTM,"D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations" 2016,ASTM,"D5871-16 Standard Specification for Benzene for Cyclohexane Feedstock" 2001,ASTM,"D5865-01ae1 Standard Test Method for Gross Calorific Value of Coal and Coke" 1999,ASTM,"D5847-99ae1 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis" 2018,ASTM,"D737-18 Standard Test Method for Air Permeability of Textile Fabrics" 2016,ASTM,"D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability" 2010,ASTM,"F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))" 2007,ASTM,"F1941-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))" 2010,ASTM,"F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) (Redline)" 2017,ASTM,"D714-02(2017) Standard Test Method for Evaluating Degree of Blistering of Paints" 2017,ASTM,"D664-17a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 1999,ASTM,"D5617-99e1 Standard Test Method for Multi-Axial Tension Test for Geosynthetics" 1994,ASTM,"D5611-94e1 Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application" 1994,ASTM,"D5609-94e1 Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling" 1995,ASTM,"D5607-95 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force" 2012,ASTM,"F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2011,ASTM,"F1924-05(2011) Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2016,ASTM,"D5606-16 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 2017,ASTM,"D664-17 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2016,ASTM,"D56-16 Standard Test Method for Flash Point by Tag Closed Cup Tester" 2016,ASTM,"D5596-03(2016) Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics" 2018,ASTM,"D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 1994,ASTM,"D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge" 2016,ASTM,"D5493-06(2016) Standard Test Method for Permittivity of Geotextiles Under Load" 1993,ASTM,"D5490-93e1 Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information" 2016,ASTM,"D5471-16 Standard Specification for O-Xylene 980" 2001,ASTM,"F1924-01 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2001,ASTM,"F1924-01e1 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 1998,ASTM,"F1924-98 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2016,ASTM,"D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) (Redline)" 2016,ASTM,"D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)" 1999,ASTM,"D5397-99e1 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 2016,ASTM,"D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing (Redline)" 2016,ASTM,"D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing" 2005,ASTM,"F1924-05 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing" 2012,ASTM,"F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing (Redline)" 2016,ASTM,"D5309-16 Standard Specification for Cyclohexane 999" 2016,ASTM,"D5262-07(2016) Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics" 2012,ASTM,"F1915-05(2012) Standard Test Methods for Glazing for Detention Facilities" 2016,ASTM,"D5249-10(2016) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints" 2016,ASTM,"D5211-16 Standard Specification for Xylenes for p-Xylene Feedstock" 2002,ASTM,"D5206-96(2002)e1 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding" 2018,ASTM,"D523-14(2018) Standard Test Method for Specular Gloss" 2017,ASTM,"D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings" 2017,ASTM,"D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products" 2002,ASTM,"D5135-02e1 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography" 2016,ASTM,"D5126/D5126M-16 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone" 1998,ASTM,"F1915-98 Standard Test Methods for Glazing for Detention Facilities" 2018,ASTM,"D450/D450M-07(2018) Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing" 2017,ASTM,"D448-12(2017) Standard Classification for Sizes of Aggregate for Road and Bridge Construction" 2017,ASTM,"D413-98(2017) Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate" 2018,ASTM,"D396-18 Standard Specification for Fuel Oils" 2005,ASTM,"F1915-05 Standard Test Methods for Glazing for Detention Facilities" 2003,ASTM,"F1915-03 Standard Test Methods for Glazing for Detention Facilities" 2014,ASTM,"F1913-04(2014) Standard Specification for Vinyl Sheet Floor Covering Without Backing" 2010,ASTM,"F1913-04(2010) Standard Specification for Vinyl Sheet Floor Covering Without Backing" 2017,ASTM,"D396-17a Standard Specification for Fuel Oils" 1998,ASTM,"F1913-98 Standard Specification for Vinyl Sheet Floor Covering Without Backing" 2004,ASTM,"F1913-04 Standard Specification for Vinyl Sheet Floor Covering Without Backing" 2016,ASTM,"D5078/D5078M-11(2016) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements" 2002,ASTM,"F1913-02 Standard Specification for Vinyl Sheet Floor Covering Without Backing" 2015,ASTM,"F1911-05(2015) Standard Practice for Installation of Barbed Tape" 2010,ASTM,"F1911-05(2010) Standard Practice for Installation of Barbed Tape" 2017,ASTM,"D244-09(2017) Standard Test Methods and Practices for Emulsified Asphalts" 2005,ASTM,"F1911-05 Standard Practice for Installation of Barbed Tape" 1998,ASTM,"F1911-98 Standard Practice for Installation of Barbed Tape" 2016,ASTM,"D5055-16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists (Redline)" 2016,ASTM,"D5055-16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists" 2018,ASTM,"D187-18 Standard Test Method for Burning Quality of Kerosene" 2018,ASTM,"D130-18 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test" 2013,ASTM,"F1910-98(2013) Standard Specification for Long Barbed Tape Obstacles" 2016,ASTM,"D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics" 2000,ASTM,"D4968-00 Standard Guide for Annual Review of Test Methods and Specifications for Plastics" 2003,ASTM,"F1910-98(2003) Standard Specification for Long Barbed Tape Obstacles" 1998,ASTM,"F1910-98e1 Standard Specification for Long Barbed Tape Obstacles" 2008,ASTM,"F1910-98(2008) Standard Specification for Long Barbed Tape Obstacles" 2014,ASTM,"F1895-14 Standard Test Method for Submersion of a Membrane Switch (Redline)" 2014,ASTM,"F1895-14 Standard Test Method for Submersion of a Membrane Switch" 2017,ASTM,"D113-17 Standard Test Method for Ductility of Asphalt Materials" 2010,ASTM,"F1895-10a Practice for Submersion of a Membrane Switch" 2017,ASTM,"D97-17b Standard Test Method for Pour Point of Petroleum Products" 2016,ASTM,"D4956-16a Standard Specification for Retroreflective Sheeting for Traffic Control" 2016,ASTM,"D4956-16 Standard Specification for Retroreflective Sheeting for Traffic Control" 2018,ASTM,"D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)" 1999,ASTM,"D495-99 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation" 1995,ASTM,"D4943-95 Standard Test Method for Shrinkage Factors of Soils by the Wax Method" 2016,ASTM,"D4897/D4897M-16 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing (Redline)" 2016,ASTM,"D4897/D4897M-16 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing" 2016,ASTM,"D4886-10(2016) Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)" 2016,ASTM,"D4869/D4869M-16a Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing (Redline)" 2016,ASTM,"D4869/D4869M-16a Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing" 1995,ASTM,"D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders" 2010,ASTM,"F1895-10 Practice for Submersion of a Membrane Switch" 2016,ASTM,"D4814-16d Standard Specification for Automotive Spark-Ignition Engine Fuel" 2004,ASTM,"F1895-98(2004) Practice for Submersion of a Membrane Switch" 1998,ASTM,"F1895-98 Practice for Submersion of a Membrane Switch" 2016,ASTM,"D4814-16c Standard Specification for Automotive Spark-Ignition Engine Fuel" 2016,ASTM,"D4814-16b Standard Specification for Automotive Spark-Ignition Engine Fuel" 2011,ASTM,"F1869-11 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2010,ASTM,"F1869-10 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2009,ASTM,"F1869-09 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 1998,ASTM,"F1869-98 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2004,ASTM,"F1869-04 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2017,ASTM,"D70-17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 2003,ASTM,"F1869-03 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride" 2013,ASTM,"F1866-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings (Redline)" 2016,ASTM,"D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet (Redline)" 2013,ASTM,"F1866-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 1998,ASTM,"F1866-98 Standard Specification for Poly (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 2016,ASTM,"D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet" 2007,ASTM,"F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 2016,ASTM,"D4798/D4798M-11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)" 2005,ASTM,"F1866-05 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings" 1995,ASTM,"D4753-95 Standard Specification for Evaluating, Selecting, and Specifying Balances and Scales for Use in Soil, Rock, and Construction Materials Testing" 2000,ASTM,"D4735-96(2000) Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography" 2016,ASTM,"D4734-16 Standard Specification for Refined Benzene-545" 2016,ASTM,"D471-16a Standard Test Method for Rubber Property—Effect of Liquids (Redline)" 2016,ASTM,"D471-16a Standard Test Method for Rubber Property—Effect of Liquids" 2012,ASTM,"F1861-08(2012) Standard Specification for Resilient Wall Base" 2018,ASTM,"D43/D43M-00(2018) Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing" 2015,ASTM,"D4637/D4637M-15 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane" 2017,ASTM,"D25-12(2017) Standard Specification for Round Timber Piles" 2012,ASTM,"F1861-08(2012)e1 Standard Specification for Resilient Wall Base" 2016,ASTM,"D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers (Redline)" 2016,ASTM,"D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers" 2008,ASTM,"F1861-08 Standard Specification for Resilient Wall Base" 2002,ASTM,"F1861-02 Standard Specification for Resilient Wall Base" 2016,ASTM,"D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil (Redline)" 2018,ASTM,"D8-18 Standard Terminology Relating to Materials for Roads and Pavements" 2016,ASTM,"D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil" 2016,ASTM,"D4611-16 Standard Test Method for Specific Heat of Rock and Soil (Redline)" 2016,ASTM,"D4611-16 Standard Test Method for Specific Heat of Rock and Soil" 2018,ASTM,"D6/D6M-95(2018) Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds" 2000,ASTM,"F1861-00 Standard Specification for Resilient Wall Base" 2014,ASTM,"F1860-14 Standard Specification for Rubber Sheet Floor Covering With Backing" 1991,ASTM,"D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings" 2014,ASTM,"F1860-14 Standard Specification for Rubber Sheet Floor Covering With Backing (Redline)" 1995,ASTM,"D4506-90(1995) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test" 2009,ASTM,"F1860-04(2009)e1 Standard Specification for Rubber Sheet Floor Covering With Backing" 2010,ASTM,"F1860-10 Standard Specification for Rubber Sheet Floor Covering With Backing" 2016,ASTM,"D4493-16 Standard Test Method for Solidification Point of Bisphenol A(4,4-Isopropylidenediphenol) (Redline)" 2016,ASTM,"D4493-16 Standard Test Method for Solidification Point of Bisphenol A(4,4-Isopropylidenediphenol)" 2012,ASTM,"F1860-12 Standard Specification for Rubber Sheet Floor Covering With Backing" 2004,ASTM,"F1860-04 Standard Specification for Rubber Sheet Floor Covering With Backing" 2003,ASTM,"F1860-03 Standard Specification for Rubber Sheet Floor Covering With Backing" 2000,ASTM,"F1860-00 Standard Specification for Rubber Sheet Floor Covering With Backing" 2014,ASTM,"F1859-14 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2014,ASTM,"F1859-14 Standard Specification for Rubber Sheet Floor Covering Without Backing (Redline)" 2016,ASTM,"D4491/D4491M-16 Standard Test Methods for Water Permeability of Geotextiles by Permittivity" 2016,ASTM,"D4477-16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit (Redline)" 2016,ASTM,"D4477-16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit" 2009,ASTM,"F1859-04(2009)e1 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2010,ASTM,"F1859-10 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2012,ASTM,"F1859-12 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2004,ASTM,"F1859-04 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2003,ASTM,"F1859-03 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2000,ASTM,"F1859-00 Standard Specification for Rubber Sheet Floor Covering Without Backing" 2018,ASTM,"D4-86(2018) Standard Test Method for Bitumen Content" 2014,ASTM,"F1852-14 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Redline)" 2000,ASTM,"F1852-00 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2002,ASTM,"F1852-02 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2004,ASTM,"F1852-04 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 1988,ASTM,"D4437-94(1988) Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes" 2017,ASTM,"C1864-17 Standard Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer" 2004,ASTM,"F1852-04a Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2005,ASTM,"F1852-05 Standard Specification for ""Twist Off"" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength" 2000,ASTM,"D4403-84(2000)e1 Standard Practice for Extensometers Used in Rock" 2000,ASTM,"D4402-87(2000)e1 Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus" 2015,ASTM,"F1812-15 Standard Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device (Redline)" 2015,ASTM,"F1812-15 Standard Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device" 2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications (Redline)" 2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications" 2001,ASTM,"D4383-01 Standard Specification for Plowable, Raised Retroreflective Pavement Markers" 2016,ASTM,"D4254-16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density" 2014,ASTM,"D4254-14 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density" 2009,ASTM,"F1812-09 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding" 1997,ASTM,"F1812-97a Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding" 2016,ASTM,"D4253-16 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table" 2014,ASTM,"D4253-14 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table" 2016,ASTM,"D4226-16 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (Redline)" 2016,ASTM,"D4226-16 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products" 2014,ASTM,"D4101-14e1 Standard Specification for Polypropylene Injection and Extrusion Materials" 2002,ASTM,"F1812-02 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding" 2016,ASTM,"D41/D41M-11(2016) Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing" 2016,ASTM,"D4083-89(2016) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)" 1996,ASTM,"D4078-92(1996) Standard Specification for Water Emulsion Floor Polish" 2016,ASTM,"D4077-16 Standard Specification for Cumene (Isopropylbenzene)" 2014,ASTM,"F1807-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2014,ASTM,"F1807-14a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2013,ASTM,"F1807-13a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2015,ASTM,"F1807-15 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2013,ASTM,"F1807-13 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2012,ASTM,"F1807-12 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2007,ASTM,"F1807-07ae1 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2010,ASTM,"F1807-10e1 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2011,ASTM,"F1807-11ae1 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2011,ASTM,"F1807-11 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 1999,ASTM,"F1807-99 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2010,ASTM,"F1807-10 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2009,ASTM,"F1807-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2008,ASTM,"F1807-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2018,ASTM,"C1861-18 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster" 2017,ASTM,"C1861-17 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster" 2007,ASTM,"F1807-07a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2007,ASTM,"F1807-07 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2005,ASTM,"F1807-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2017,ASTM,"C1859-17a Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications" 2004,ASTM,"F1807-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2003,ASTM,"F1807-03 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F1807-02a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2002,ASTM,"F1807-02 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing" 2014,ASTM,"F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch" 1997,ASTM,"F1762-97 Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure" 2007,ASTM,"F1762-07 Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure" 2002,ASTM,"F1762-02 Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure" 1997,ASTM,"F1760-97 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content" 2001,ASTM,"F1760-01 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content" 2005,ASTM,"F1760-01(2005)e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content" 2017,ASTM,"C1859-17 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications" 2011,ASTM,"F1760-01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content" 2010,ASTM,"F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications" 2004,ASTM,"F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications" 1997,ASTM,"F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications" 2012,ASTM,"F1758-05(2012) Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors" 1996,ASTM,"F1758-96e1 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors" 2005,ASTM,"F1758-05 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors" 2003,ASTM,"F1758-03 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors" 2017,ASTM,"C1858-17a Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions" 1996,ASTM,"F1743-96 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)" 2003,ASTM,"F1743-96(2003) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)" 2008,ASTM,"F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)" 2013,ASTM,"F1700-13a Standard Specification for Solid Vinyl Floor Tile" 2013,ASTM,"F1700-13 Standard Specification for Solid Vinyl Floor Tile" 2010,ASTM,"F1700-04(2010) Standard Specification for Solid Vinyl Floor Tile" 1999,ASTM,"F1700-99 Standard Specification for Solid Vinyl Floor Tile" 2004,ASTM,"F1700-04 Standard Specification for Solid Vinyl Floor Tile" 2012,ASTM,"F1689-05(2012) Standard Test Method for Determining the Insulation Resistance of a Membrane Switch" 1996,ASTM,"F1689-96 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch" 2005,ASTM,"F1689-05 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch" 2002,ASTM,"F1689-02 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch" 2009,ASTM,"F1683-09 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component (Redline)" 2009,ASTM,"F1683-09 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component" 1996,ASTM,"F1683-96a Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Tail Assembly or Membrane Switch Component" 2005,ASTM,"F1683-05e1 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component" 2005,ASTM,"F1683-05 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component" 2002,ASTM,"F1683-02 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Tail Assembly or Membrane Switch Component" 2014,ASTM,"F1680-07a(2014) Standard Test Method for Determining Circuit Resistance of a Membrane Switch" 1996,ASTM,"F1680-96 Standard Test Method for Determining Circuit Resistance of a Membrane Switch" 2007,ASTM,"F1680-07a Standard Test Method for Determining Circuit Resistance of a Membrane Switch" 2007,ASTM,"F1680-07 Standard Test Method for Determining Circuit Resistance of a Membrane Switch" 2002,ASTM,"F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch" 2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems (Redline)" 2017,ASTM,"C1858-17 Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions" 2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 2009,ASTM,"F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 1995,ASTM,"F1673-95 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 2004,ASTM,"F1673-04 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 2002,ASTM,"F1673-02 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems" 2002,ASTM,"F1668-96(2002) Standard Guide for Construction Procedures for Buried Plastic Pipe" 1996,ASTM,"F1668-96 Standard Guide for Construction Procedures for Buried Plastic Pipe" 2008,ASTM,"F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe" 2015,ASTM,"F1667-15 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2013,ASTM,"F1667-13 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2011,ASTM,"F1667-11a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2011,ASTM,"F1667-11 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2010,ASTM,"F1667-10 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2011,ASTM,"F1667-11ae1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples " 2005,ASTM,"F1667-05 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2003,ASTM,"F1667-03 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2002,ASTM,"F1667-02a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2002,ASTM,"F1667-02 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2001,ASTM,"F1667-01a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2001,ASTM,"F1667-01 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2000,ASTM,"F1667-00 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2017,ASTM,"C1856/C1856M-17 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete" 1995,ASTM,"F1665-95 Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence" 2008,ASTM,"F1665-08 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence" 2001,ASTM,"F1665-01 Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence" 2013,ASTM,"F1665-08(2013) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence" 2013,ASTM,"F1664-08(2013) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence" 1995,ASTM,"F1664-95 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence" 2008,ASTM,"F1664-08 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence" 2001,ASTM,"F1664-01 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence" 2015,ASTM,"F1663-15 Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device (Redline)" 2015,ASTM,"F1663-15 Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device" 2017,ASTM,"C1852-17 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives" 2017,ASTM,"C1850-17 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems" 2017,ASTM,"C1849/C1849M-17 Standard Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete" 2017,ASTM,"C1848-17a Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure" 2009,ASTM,"F1663-09 Standard Test Method for Determining the Capacitance of a Membrane Switch" 2002,ASTM,"F1663-95(2002) Standard Test Method for Determining the Capacitance of a Membrane Switch" 1995,ASTM,"F1663-95 Standard Test Method for Determining the Capacitance of a Membrane Switch" 2002,ASTM,"F1662-95(2002) Standard Test Method for Verifying the Specified Dielectric Withstand Voltage of a Member Switch" 2004,ASTM,"F1662-04 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch" 2003,ASTM,"F1662-03 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch" 2010,ASTM,"F1662-10 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch" 1995,ASTM,"F1662-95 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage of a Member Switch" 2015,ASTM,"F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch" 2009,ASTM,"F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch (Redline)" 2009,ASTM,"F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch" 2002,ASTM,"F1661-96(2002) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch" 1996,ASTM,"F1661-96 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch" 2008,ASTM,"F1661-08 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch" 2002,ASTM,"F1647-02 Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes" 2017,ASTM,"C1848-17 Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure" 2002,ASTM,"F1647-02a Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes" 2011,ASTM,"F1647-11 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes (Redline)" 2011,ASTM,"F1647-11 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes" 2010,ASTM,"F1647-02a(2010) Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes" 2012,ASTM,"F1643-05(2012) Standard Test Methods for Detention Sliding Door Locking Device Assembly " 2017,ASTM,"C1846/C1846M-17 Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2017,ASTM,"C1840/C1840M-17 Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe" 1995,ASTM,"F1643-95 Standard Test Methods for Detention Sliding Door Locking Device Assembly" 2005,ASTM,"F1643-05 Standard Test Methods for Detention Sliding Door Locking Device Assembly" 2001,ASTM,"F1643-01a Standard Test Methods for Detention Sliding Door Locking Device Assembly" 2017,ASTM,"C1837-17 Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures" 2001,ASTM,"F1643-01 Standard Test Methods for Detention Sliding Door Locking Device Assembly" 2012,ASTM,"F1642-12 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings (Redline)" 2012,ASTM,"F1642-12 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 2010,ASTM,"F1642-04(2010) Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 1996,ASTM,"F1642-96 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 2004,ASTM,"F1642-04 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 2003,ASTM,"F1642-03 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings" 2014,ASTM,"F1598-95(2014) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)" 2007,ASTM,"F1598-95(2007) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)" 2002,ASTM,"F1598-95(2002) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)" 1995,ASTM,"F1598-95 Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)" 2015,ASTM,"F1596-15 Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity (Redline)" 2015,ASTM,"F1596-15 Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity" 2007,ASTM,"F1596-07 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity" 2005,ASTM,"F1596-00(2005) Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity" 2000,ASTM,"F1596-00 Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity" 2012,ASTM,"F1595-00(2012) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches " 2005,ASTM,"F1595-00(2005) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches" 2000,ASTM,"F1595-00 Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches" 2012,ASTM,"F1592-12 Standard Test Methods for Detention Hollow Metal Vision Systems (Redline)" 2017,ASTM,"C1815-17 Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension" 2018,ASTM,"C1802-18 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures" 2012,ASTM,"F1592-12 Standard Test Methods for Detention Hollow Metal Vision Systems" 1995,ASTM,"F1592-95a Standard Test Methods for Detention Hollow Metal Vision Systems" 2005,ASTM,"F1592-05 Standard Test Methods for Detention Hollow Metal Vision Systems" 2001,ASTM,"F1592-01 Standard Test Methods for Detention Hollow Metal Vision Systems" 2014,ASTM,"F1578-07(2014) Standard Test Method for Contact Closure Cycling of a Membrane Switch" 2007,ASTM,"F1578-07 Standard Test Method for Contact Closure Cycling of a Membrane Switch" 2001,ASTM,"F1578-01 Standard Practice for Contact Closure Cycling of a Membrane Switch" 2000,ASTM,"F1578-00 Standard Practice for Contact Closure Cycling of a Membrane Switch" 2017,ASTM,"C1797-17 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete" 2012,ASTM,"F1577-05(2012) Standard Test Methods for Detention Locks for Swinging Doors " 1996,ASTM,"F1577-96 Standard Test Methods for Detention Locks for Swinging Doors" 2005,ASTM,"F1577-05 Standard Test Methods for Detention Locks for Swinging Doors" 2001,ASTM,"F1577-01 Standard Test Methods for Detention Locks for Swinging Doors" 2018,ASTM,"C1786-18 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD" 2015,ASTM,"F1554-15 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength (Redline)" 2015,ASTM,"F1554-15 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2004,ASTM,"F1554-04e1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2007,ASTM,"F1554-07ae1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 1999,ASTM,"F1554-99 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2007,ASTM,"F1554-07a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2007,ASTM,"F1554-07 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2004,ASTM,"F1554-04 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 1996,ASTM,"F1553-96 Standard Guide for Specifying Industrial and Commercial Chain Link Fence" 2001,ASTM,"F1553-01 Standard Guide for Specifying Industrial and Commercial Chain Link Fence" 2011,ASTM,"F1553-11 Standard Guide for Specifying Chain Link Fence (Redline)" 2011,ASTM,"F1553-11 Standard Guide for Specifying Chain Link Fence" 2006,ASTM,"F1553-06 Standard Guide for Specifying Chain Link Fence" 2013,ASTM,"F1516-13 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended) (Redline)" 2013,ASTM,"F1516-13 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)" 1999,ASTM,"F1516-94(1999) Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)" 2008,ASTM,"F1516-08 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)" 2003,ASTM,"F1516-03 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)" 2013,ASTM,"F150-06(2013) Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring" 2006,ASTM,"F150-06 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring (Redline)" 1998,ASTM,"F150-98 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring" 2006,ASTM,"F150-06 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring" 2017,ASTM,"C1786-17 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD" 2012,ASTM,"F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) " 2008,ASTM,"F1499-01(2008) Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)" 2001,ASTM,"F1499-01 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)" 2000,ASTM,"F1499-00 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)" 2000,ASTM,"F1488-00e1 Standard Specification for Coextruded Composite Pipe" 2009,ASTM,"F1488-09e1 Standard Specification for Coextruded Composite Pipe" 2009,ASTM,"F1488-09 Standard Specification for Coextruded Composite Pipe" 2003,ASTM,"F1488-03 Standard Specification for Coextruded Composite Pipe" 2000,ASTM,"F1488-00 Standard Specification for Coextruded Composite Pipe" 2001,ASTM,"F1487-01e1 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2007,ASTM,"F1487-07ae1 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2011,ASTM,"F1487-11 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 1998,ASTM,"F1487-98 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2007,ASTM,"F1487-07a Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2007,ASTM,"F1487-07 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2005,ASTM,"F1487-05 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2001,ASTM,"F1487-01 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use" 2013,ASTM,"F1476-07(2013) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications" 2007,ASTM,"F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications (Redline)" 2007,ASTM,"F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications" 2006,ASTM,"F1476-01(2006) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications" 2001,ASTM,"F1476-01 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications" 1999,ASTM,"F1469-99 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing" 2010,ASTM,"F1469-99(2010) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing" 2011,ASTM,"F1469-11 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing (Redline)" 2017,ASTM,"C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing" 2004,ASTM,"F1469-99(2004) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing" 1980,ASTM,"F146-80 Standard Test Methods for Fluid Resistance Of Gasket Materials" 2012,ASTM,"F146-12 Standard Test Methods for Fluid Resistance of Gasket Materials (Redline)" 2012,ASTM,"F146-12 Standard Test Methods for Fluid Resistance of Gasket Materials" 2004,ASTM,"F146-04 Standard Test Methods for Fluid Resistance of Gasket Materials" 2001,ASTM,"F146-01 Standard Test Methods for Fluid Resistance of Gasket Materials" 1998,ASTM,"F146-98e1 Standard Test Methods for Fluid Resistance of Gasket Materials" 2017,ASTM,"C1776/C1776M-17 Standard Specification for Wet-Cast Precast Modular Retaining Wall Units" 2012,ASTM,"F1459-06(2012) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)" 1998,ASTM,"F1459-93(1998)e1 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement" 2006,ASTM,"F1459-06 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)" 2012,ASTM,"F1450-12a Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities (Redline)" 2012,ASTM,"F1450-12a Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities" 2012,ASTM,"F1450-12 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities " 2010,ASTM,"F1450-10 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities" 2004,ASTM,"F1450-97(2004) Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities" 1997,ASTM,"F1450-97 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities" 2005,ASTM,"F1450-05 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities" 2015,ASTM,"F144-80(2015) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods" 2010,ASTM,"F144-80(2010) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods" 2000,ASTM,"F144-80(2000) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods" 1995,ASTM,"F144-80(1995)e1 Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods" 2005,ASTM,"F144-80(2005) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods" 2013,ASTM,"F1427-13 Standard Consumer Safety Specification for Bunk Beds (Redline)" 2013,ASTM,"F1427-13 Standard Consumer Safety Specification for Bunk Beds" 1996,ASTM,"F1427-96 Standard Consumer Safety Specification for Bunk Beds" 2001,ASTM,"F1427-01 Standard Consumer Safety Specification for Bunk Beds" 2004,ASTM,"F1427-04 Standard Consumer Safety Specification for Bunk Beds" 2004,ASTM,"F1427-04e1 Standard Consumer Safety Specification for Bunk Beds" 2006,ASTM,"F1427-06 Standard Consumer Safety Specification for Bunk Beds" 2007,ASTM,"F1427-07 Standard Consumer Safety Specification for Bunk Beds" 2015,ASTM,"F1417-11a(2015) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air" 2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air (Redline)" 2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air" 2011,ASTM,"F1417-11 Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air" 2005,ASTM,"F1417-92(2005) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air" 1998,ASTM,"F1417-92(1998) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air" 2001,ASTM,"F1412-01e1 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2009,ASTM,"F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2001,ASTM,"F1412-01 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2000,ASTM,"F1412-00 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems" 2013,ASTM,"F140-98(2013) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods" 2008,ASTM,"F140-98(2008) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods" 2003,ASTM,"F140-98(2003) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods" 1998,ASTM,"F140-98 Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods" 2015,ASTM,"F14-80(2015) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal" 2005,ASTM,"F14-80(2005) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal" 2000,ASTM,"F14-80(2000) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal" 1995,ASTM,"F14-80(1995)e1 Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal" 2010,ASTM,"F14-80(2010) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal" 2013,ASTM,"F1379-95(2013) Standard Terminology Relating to Barbed Tape" 2008,ASTM,"F1379-95(2008) Standard Terminology Relating to Barbed Tape" 2003,ASTM,"F1379-95(2003) Standard Terminology Relating to Barbed Tape" 1995,ASTM,"F1379-95 Standard Terminology Relating to Barbed Tape" 2010,ASTM,"F1346-91(2010) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs" 2003,ASTM,"F1346-91(2003) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs" 1996,ASTM,"F1346-91(1996) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs" 2017,ASTM,"C1756-17a Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs" 2015,ASTM,"F1345-10a(2015) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 2010,ASTM,"F1345-10a Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric (Redline)" 2010,ASTM,"F1345-10a Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 2010,ASTM,"F1345-10 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 2008,ASTM,"F1345-96(2008) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 2003,ASTM,"F1345-96(2003) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 1996,ASTM,"F1345-96 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric" 2012,ASTM,"F1344-12e1 Standard Specification for Rubber Floor Tile" 2012,ASTM,"F1344-12 Standard Specification for Rubber Floor Tile " 2009,ASTM,"F1344-04(2009)e1 Standard Specification for Rubber Floor Tile" 2010,ASTM,"F1344-10 Standard Specification for Rubber Floor Tile" 2004,ASTM,"F1344-04 Standard Specification for Rubber Floor Tile" 2003,ASTM,"F1344-03a Standard Specification for Rubber Floor Tile" 2003,ASTM,"F1344-03 Standard Specification for Rubber Floor Tile" 2000,ASTM,"F1344-00 Standard Specification for Rubber Floor Tile" 2013,ASTM,"F1342/F1342M-05(2013)e1 Standard Test Method for Protective Clothing Material Resistance to Puncture" 1996,ASTM,"F1342-91(1996)e2 Standard Test Method for Protective Clothing Material Resistance to Puncture" 2005,ASTM,"F1342-05 Standard Test Method for Protective Clothing Material Resistance to Puncture (Redline)" 2005,ASTM,"F1342-05 Standard Test Method for Protective Clothing Material Resistance to Puncture" 2015,ASTM,"F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings (Redline)" 2015,ASTM,"F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings" 2000,ASTM,"F1336-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings" 2002,ASTM,"F1336-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings" 2007,ASTM,"F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings" 2009,ASTM,"F1303-04(2009) Standard Specification for Sheet Vinyl Floor Covering with Backing" 2004,ASTM,"F1303-04 Standard Specification for Sheet Vinyl Floor Covering with Backing" 1999,ASTM,"F1303-99 Standard Specification for Sheet Vinyl Floor Covering with Backing" 2002,ASTM,"F1303-02 Standard Specification for Sheet Vinyl Floor Covering with Backing" 2013,ASTM,"F1292-13 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment" 2009,ASTM,"F1292-09 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment" 1999,ASTM,"F1292-99 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment" 2004,ASTM,"F1292-04 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment" 2011,ASTM,"F1290-98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings" 2004,ASTM,"F1290-98a(2004) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings" 1998,ASTM,"F1290-98a Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings" 2002,ASTM,"F1282-02e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2002,ASTM,"F1282-02e2 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2003,ASTM,"F1282-03e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2010,ASTM,"F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2006,ASTM,"F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2003,ASTM,"F1282-03 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2001,ASTM,"F1282-01a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2001,ASTM,"F1282-01 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2000,ASTM,"F1282-00 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe" 2002,ASTM,"F1281-02e3 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2002,ASTM,"F1281-02e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2002,ASTM,"F1281-02e2 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2003,ASTM,"F1281-03e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2011,ASTM,"F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2007,ASTM,"F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2005,ASTM,"F1281-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2003,ASTM,"F1281-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2001,ASTM,"F1281-01a Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2001,ASTM,"F1281-01 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2000,ASTM,"F1281-00 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe" 2015,ASTM,"F1267-15 Standard Specification for Metal, Expanded, Steel (Redline)" 2015,ASTM,"F1267-15 Standard Specification for Metal, Expanded, Steel" 2012,ASTM,"F1267-12 Standard Specification for Metal, Expanded, Steel " 1997,ASTM,"F1267-91(1997) Standard Specification for Metal, Expanded, Steel" 2007,ASTM,"F1267-07 Standard Specification for Metal, Expanded, Steel" 2006,ASTM,"F1267-06 Standard Specification for Metal, Expanded, Steel" 2001,ASTM,"F1267-01 Standard Specification for Metal, Expanded, Steel" 2013,ASTM,"F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor (Redline)" 2013,ASTM,"F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 2011,ASTM,"F1249-06(2011) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 2001,ASTM,"F1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 1995,ASTM,"F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 2006,ASTM,"F1249-06 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor" 2013,ASTM,"F1233-08(2013) Standard Test Method for Security Glazing Materials And Systems" 2008,ASTM,"F1233-08 Standard Test Method for Security Glazing Materials And Systems (Redline)" 2004,ASTM,"F1233-98(2004) Standard Test Method for Security Glazing Materials And Systems" 1998,ASTM,"F1233-98 Standard Test Method for Security Glazing Materials And Systems" 2008,ASTM,"F1233-08 Standard Test Method for Security Glazing Materials And Systems" 1998,ASTM,"F1216-98 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2003,ASTM,"F1216-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2005,ASTM,"F1216-05 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2007,ASTM,"F1216-07 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2007,ASTM,"F1216-07a Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2007,ASTM,"F1216-07b Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2008,ASTM,"F1216-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2009,ASTM,"F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2006,ASTM,"F1216-06 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube" 2016,ASTM,"F1184-16 Standard Specification for Industrial and Commercial Horizontal Slide Gates (Redline)" 2016,ASTM,"F1184-16 Standard Specification for Industrial and Commercial Horizontal Slide Gates" 2010,ASTM,"F1184-05(2010) Standard Specification for Industrial and Commercial Horizontal Slide Gates" 2000,ASTM,"F1184-94(2000) Standard Specification for Industrial and Commercial Horizontal Slide Gates" 2005,ASTM,"F1184-05 Standard Specification for Industrial and Commercial Horizontal Slide Gates" 2003,ASTM,"F1184-03 Standard Specification for Industrial and Commercial Horizontal Slide Gates" 2011,ASTM,"F1183-96(2011) Standard Specification for Aluminum Alloy Chain Link Fence Fabric" 2006,ASTM,"F1183-96(2006) Standard Specification for Aluminum Alloy Chain Link Fence Fabric" 2002,ASTM,"F1183-96(2002) Standard Specification for Aluminum Alloy Chain Link Fence Fabric" 1996,ASTM,"F1183-96 Standard Specification for Aluminum Alloy Chain Link Fence Fabric" 2013,ASTM,"F1182-07(2013) Standard Specification for Anodes, Sacrificial Zinc Alloy" 2007,ASTM,"F1182-07 Standard Specification for Anodes, Sacrificial Zinc Alloy (Redline)" 2006,ASTM,"F1182-90(2006) Standard Specification for Anodes, Sacrificial Zinc Alloy" 2001,ASTM,"F1182-90(2001) Standard Specification for Anodes, Sacrificial Zinc Alloy" 1996,ASTM,"F1182-90(1996) Standard Specification for Anodes, Sacrificial Zinc Alloy" 2007,ASTM,"F1182-07 Standard Specification for Anodes, Sacrificial Zinc Alloy" 2004,ASTM,"F1141-93(2004) Standard Specification for Wallcovering" 2009,ASTM,"F1141-93(2009) Standard Specification for Wallcovering" 1998,ASTM,"F1141-93(1998) Standard Specification for Wallcovering" 2010,ASTM,"F1141-10 Standard Specification for Wallcovering (Redline)" 2010,ASTM,"F1141-10 Standard Specification for Wallcovering" 2011,ASTM,"F1137-11 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners" 2011,ASTM,"F1137-11e1 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners" 2006,ASTM,"F1137-00(2006) Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners" 2000,ASTM,"F1137-00 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners" 2015,ASTM,"F1123-87(2015) Standard Specification for Non-Metallic Expansion Joints" 2010,ASTM,"F1123-87(2010) Standard Specification for Non-Metallic Expansion Joints" 2004,ASTM,"F1123-87(2004) Standard Specification for Non-Metallic Expansion Joints" 1998,ASTM,"F1123-87(1998) Standard Specification for Non-Metallic Expansion Joints" 2015,ASTM,"F1120-87(2015) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications" 2010,ASTM,"F1120-87(2010) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications" 2004,ASTM,"F1120-87(2004) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications" 1998,ASTM,"F1120-87(1998) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications" 2014,ASTM,"F1105-09(2014) Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing" 2003,ASTM,"F1105-03 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing" 1999,ASTM,"F1105-95(1999)e1 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing" 2009,ASTM,"F1105-09 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing (Redline)" 2009,ASTM,"F1105-09 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing" 2015,ASTM,"F1090-15 Standard Classification for Bank and Mercantile Vault Construction" 2015,ASTM,"F1090-15 Standard Classification for Bank and Mercantile Vault Construction (Redline)" 1997,ASTM,"F1090-87(1997)e1 Standard Classification for Bank and Mercantile Vault Construction" 2006,ASTM,"F1090-06 Standard Classification for Bank and Mercantile Vault Construction" 2016,ASTM,"F1083-16 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures (Redline)" 2016,ASTM,"F1083-16 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2013,ASTM,"F1083-13 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2010,ASTM,"F1083-10 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2003,ASTM,"F1083-97(2003) Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 1997,ASTM,"F1083-97 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2008,ASTM,"F1083-08 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2006,ASTM,"F1083-06 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2004,ASTM,"F1083-04 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures" 2014,ASTM,"F1066-04(2014)e1 Standard Specification for Vinyl Composition Floor Tile" 2010,ASTM,"F1066-04(2010)e1 Standard Specification for Vinyl Composition Floor Tile" 1999,ASTM,"F1066-99 Standard Specification for Vinyl Composition Floor Tile" 2004,ASTM,"F1066-04 Standard Specification for Vinyl Composition Floor Tile" 1993,ASTM,"F1060-87(1993)e1 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact" 2008,ASTM,"F1060-08 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact" 2005,ASTM,"F1060-05 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact" 2001,ASTM,"F1060-01 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact" 2015,ASTM,"F1055-15 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing" 2012,ASTM,"F1055-12 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing" 2013,ASTM,"F1055-13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing" 2006,ASTM,"F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing" 1998,ASTM,"F1055-98e1 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing" 2011,ASTM,"F1055-11 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing" 1998,ASTM,"F1055-98 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing" 2015,ASTM,"F105-72(2015) Standard Specification for Type 58 Borosilicate Sealing Glass" 2010,ASTM,"F105-72(2010) Standard Specification for Type 58 Borosilicate Sealing Glass" 2005,ASTM,"F105-72(2005) Standard Specification for Type 58 Borosilicate Sealing Glass" 2000,ASTM,"F105-72(2000) Standard Specification for Type 58 Borosilicate Sealing Glass" 1995,ASTM,"F105-72(1995)e1 Standard Specification for Type 58 Borosilicate Sealing Glass" 2016,ASTM,"F1043-16 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2014,ASTM,"F1043-14 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2013,ASTM,"F1043-13 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2012,ASTM,"F1043-12 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework" 2011,ASTM,"F1043-11a Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework" 2011,ASTM,"F1043-11 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework" 2010,ASTM,"F1043-10 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework" 2008,ASTM,"F1043-08 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework" 2006,ASTM,"F1043-06 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework" 2004,ASTM,"F1043-04 Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework" 2003,ASTM,"F1043-03 Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework" 2000,ASTM,"F1043-00 Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework" 2014,ASTM,"F1007-86(2014) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application" 1996,ASTM,"F1007-86(1996)e1 Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application" 2007,ASTM,"F1007-86(2007) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application" 2002,ASTM,"F1007-86(2002) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application" 2012,ASTM,"E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method" 2012,ASTM,"E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method (Redline)" 2011,ASTM,"E998-05(2011) Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method" 1999,ASTM,"E998-84(1999) Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method" 2005,ASTM,"E998-05 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method" 2014,ASTM,"E997-14 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing" 2015,ASTM,"E997-15 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing" 2015,ASTM,"E997-15 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing (Redline)" 2011,ASTM,"E997-11 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods " 2012,ASTM,"E997-12 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods " 2009,ASTM,"E997-01(2009) Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods" 1992,ASTM,"E997-84(1992)e1 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods" 2001,ASTM,"E997-01 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods" 2013,ASTM,"E990-13 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels (Redline)" 2013,ASTM,"E990-13 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels" 2009,ASTM,"E990-09 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels" 1998,ASTM,"E990-98 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels" 2004,ASTM,"E990-04 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels" 2012,ASTM,"E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)" 1999,ASTM,"E989-89(1999) Standard Classification for Determination of Impact Insulation Class (IIC)" 2006,ASTM,"E989-06 Standard Classification for Determination of Impact Insulation Class (IIC)" 2017,ASTM,"C1756-17 Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs" 1994,ASTM,"E987-88(1994)e1 Standard Test Methods for Deglazing Force of Fenestration Products" 2009,ASTM,"E987-88(2009) Standard Test Methods for Deglazing Force of Fenestration Products" 2001,ASTM,"E987-88(2001) Standard Test Methods for Deglazing Force of Fenestration Products" 2006,ASTM,"E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings (Redline)" 2018,ASTM,"C1745/C1745M-18 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices" 2000,ASTM,"E985-00e1 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings" 2014,ASTM,"E970-14 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2010,ASTM,"E970-10 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2008,ASTM,"E970-08a Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2008,ASTM,"E970-08 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2007,ASTM,"E970-07 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2000,ASTM,"E970-00 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source" 2010,ASTM,"E966-10e1 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements" 2010,ASTM,"E966-10 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements" 1999,ASTM,"E966-99 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements" 2004,ASTM,"E966-04 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements" 2002,ASTM,"E966-02 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements" 2015,ASTM,"E965-15 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique" 2006,ASTM,"E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique (Redline)" 2001,ASTM,"E965-96(2001) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique" 1996,ASTM,"E965-96 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique" 2015,ASTM,"E964-15 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems (Redline)" 2015,ASTM,"E964-15 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 2010,ASTM,"E964-06(2010) Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 1998,ASTM,"E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 2006,ASTM,"E964-06e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 2006,ASTM,"E964-06 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 2002,ASTM,"E964-02 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems" 2015,ASTM,"E96/E96M-15 Standard Test Methods for Water Vapor Transmission of Materials" 2014,ASTM,"E96/E96M-14 Standard Test Methods for Water Vapor Transmission of Materials" 2018,ASTM,"G87-02(2018) Standard Practice for Conducting Moist SO2 Tests" 2018,ASTM,"G46-94(2018) Standard Guide for Examination and Evaluation of Pitting Corrosion" 2018,ASTM,"F2735-18 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2018,ASTM,"F2434-18 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing" 2018,ASTM,"F2306/F2306M-18 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications" 2018,ASTM,"F2195-18 Standard Specification for Linoleum Floor Tile" 2018,ASTM,"F2159-18a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2018,ASTM,"F2080-18 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe" 2018,ASTM,"F2034-18 Standard Specification for Sheet Linoleum Floor Covering" 2018,ASTM,"F1960-18a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2018,ASTM,"F1960-18 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing" 2018,ASTM,"F1807-18a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2018,ASTM,"F1667-18a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2018,ASTM,"F1667-18 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples" 2018,ASTM,"F1647-11(2018) Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes" 2018,ASTM,"F1554-18 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength" 2013,ASTM,"E96/E96M-13 Standard Test Methods for Water Vapor Transmission of Materials" 2015,ASTM,"E948-15 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 1995,ASTM,"E948-95 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 2001,ASTM,"E948-95(2001) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 2005,ASTM,"E948-05 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 2005,ASTM,"E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 2009,ASTM,"E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight" 2018,ASTM,"F1066-04(2018) Standard Specification for Vinyl Composition Floor Tile" 2018,ASTM,"F835-18 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws" 2018,ASTM,"F708-92(2018)e1 Standard Practice for Design and Installation of Rigid Pipe Hangers" 2012,ASTM,"F628-12e3 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core" 2018,ASTM,"F150-06(2018) Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring" 2018,ASTM,"E3090/E3090M-18 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems" 2010,ASTM,"E94-04(2010) Standard Guide for Radiographic Examination" 2004,ASTM,"E94-04 Standard Guide for Radiographic Examination" 2018,ASTM,"E3087-18 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods" 2018,ASTM,"E3075-18 Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance " 2018,ASTM,"E3053-18e1 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel" 2018,ASTM,"E2987/E2987M-18 Standard Terminology for Sustainable Manufacturing" 2018,ASTM,"E2986-18 Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes" 2018,ASTM,"E2969-18 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction" 2012,ASTM,"E2813-12e1 Standard Practice for Building Enclosure Commissioning" 2000,ASTM,"E94-00 Standard Guide for Radiographic Examination" 2011,ASTM,"E937-93(2011) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2005,ASTM,"E937-93(2005) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2000,ASTM,"E937-93(2000) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2013,ASTM,"E935-13e1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings" 2013,ASTM,"E935-13 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings (Redline)" 2013,ASTM,"E935-13 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings" 2000,ASTM,"E935-00e1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings" 2006,ASTM,"E935-00(2006) Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings" 2015,ASTM,"E927-10(2015) Standard Specification for Solar Simulation for Photovoltaic Testing" 1997,ASTM,"E927-91(1997) Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing" 2004,ASTM,"E927-04 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing" 2018,ASTM,"E2813-18 Standard Practice for Building Enclosure Commissioning" 2004,ASTM,"E927-04a Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing" 2005,ASTM,"E927-05 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing" 2018,ASTM,"E2462-18 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I" 2010,ASTM,"E927-10 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing" 1996,ASTM,"D3957-90(1996)e1 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings" 2018,ASTM,"E2357-18 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies" 2018,ASTM,"E2112-18b Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2018,ASTM,"E2112-18a Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2018,ASTM,"E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels" 2018,ASTM,"E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures" 2018,ASTM,"E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants" 2018,ASTM,"E1753-18a Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2018,ASTM,"E1753-18 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2018,ASTM,"E1749-18 Standard Terminology Relating to Rigid Wall Relocatable Shelters" 2018,ASTM,"E1704-95(2018) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures" 2018,ASTM,"E1646-95(2018) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference" 2018,ASTM,"E1605-18a Standard Terminology Relating to Lead in Buildings" 2018,ASTM,"E1605-18 Standard Terminology Relating to Lead in Buildings" 2018,ASTM,"E1349-06(2018) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry" 2018,ASTM,"E1321-18 Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2014,ASTM,"C1738/C1738M-14 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes" 2015,ASTM,"E917-15 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2013,ASTM,"E917-13 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2010,ASTM,"E917-05(2010) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 1999,ASTM,"E917-99 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2005,ASTM,"E917-05e1 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2005,ASTM,"E917-05 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2002,ASTM,"E917-02 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems" 2018,ASTM,"E1307-18 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels" 2002,ASTM,"E915-96(2002) Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement" 2018,ASTM,"E989-18 Standard Classification for Determination of Single-Number Metrics for Impact Noise" 2018,ASTM,"E966-18a Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements" 2018,ASTM,"E783-02(2018) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors" 2018,ASTM,"E662-18 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2018,ASTM,"E119-18c Standard Test Methods for Fire Tests of Building Construction and Materials" 2018,ASTM,"E119-18b Standard Test Methods for Fire Tests of Building Construction and Materials" 2018,ASTM,"E84-18b Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"E23-18 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2018,ASTM,"D7823-18 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry" 2018,ASTM,"D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils" 2018,ASTM,"D7635/D7635M-18 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement" 2010,ASTM,"E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement" 1996,ASTM,"E907-96 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems" 2018,ASTM,"D7467-18a Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2014,ASTM,"E906/E906M-14 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method" 2016,ASTM,"D395-16 Standard Test Methods for Rubber Property—Compression Set (Redline)" 2009,ASTM,"E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements (Redline)" 2009,ASTM,"E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements" 1999,ASTM,"E90-99 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements" 2004,ASTM,"E90-04 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements" 2002,ASTM,"E90-02 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements" 2009,ASTM,"E9-09 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature" 2018,ASTM,"D7359-18 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)" 2018,ASTM,"D7352-18 Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods" 2018,ASTM,"D7300-18 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain" 2018,ASTM,"D7147-11(2018) Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers" 2018,ASTM,"D6886-18 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography" 2018,ASTM,"D6769/D6769M-02(2018) Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems" 2018,ASTM,"D6751-18 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2018,ASTM,"D6570-18a Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber" 2018,ASTM,"D6517-18 Standard Guide for Field Preservation of Ground Water Samples" 2018,ASTM,"D6452-18 Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations" 2018,ASTM,"D5923-18 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations" 2018,ASTM,"D5922-18 Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations" 2018,ASTM,"D5881-18 Standard Practice for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)" 2018,ASTM,"D5798-18a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2018,ASTM,"D5798-18 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2018,ASTM,"D5780-18 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load" 2010,ASTM,"E894-88(2010) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings" 2004,ASTM,"E894-88(2004) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings" 2018,ASTM,"D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression" 2018,ASTM,"D5340-12(2018) Standard Test Method for Airport Pavement Condition Index Surveys" 2018,ASTM,"D5167-13(2018) Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation" 2018,ASTM,"D5124-96(2018) Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation" 1998,ASTM,"E894-88(1998) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings" 2003,ASTM,"E882-87(2003) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory" 1998,ASTM,"E882-87(1998) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory" 2018,ASTM,"D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame" 2018,ASTM,"D4814-18d Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4814-18c Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4803-18 Standard Test Method for Predicting Heat Buildup in PVC Building Products" 2010,ASTM,"E882-10 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Redline)" 2010,ASTM,"E882-10 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory" 2015,ASTM,"E881-92(2015) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode" 1996,ASTM,"E881-92(1996) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode" 2018,ASTM,"D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters" 2018,ASTM,"D3763-18 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors" 2018,ASTM,"D3699-18a Standard Specification for Kerosine" 2018,ASTM,"D3549/D3549M-18 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens" 2018,ASTM,"D3501-05a(2018) Standard Test Methods for Wood-Based Structural Panels in Compression" 2018,ASTM,"D3498-18a Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing" 2018,ASTM,"D3330/D3330M-04(2018) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape" 2003,ASTM,"E881-92(2003) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode" 2009,ASTM,"E881-92(2009) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode" 2001,ASTM,"E874-01 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 1998,ASTM,"E874-98 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 2010,ASTM,"E874-10a Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 2010,ASTM,"E874-10 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 2011,ASTM,"E874-11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 2018,ASTM,"D3145-18 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method" 2018,ASTM,"D2880-18a Standard Specification for Gas Turbine Fuel Oils" 2018,ASTM,"D2718-18 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)" 2018,ASTM,"D2710-09(2018) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration" 2018,ASTM,"D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils" 2018,ASTM,"D2519-18 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test" 2018,ASTM,"D2171/D2171M-18 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer" 2018,ASTM,"D2132-12(2018) Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials" 2018,ASTM,"D1970/D1970M-18 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection" 2018,ASTM,"D1932-18 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes" 2018,ASTM,"D1752-18 Standard Specification for Preformed Sponge Rubber, Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction" 2011,ASTM,"E874-11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels (Redline)" 2018,ASTM,"D1751-18 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)" 2018,ASTM,"D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens" 2018,ASTM,"D1670/D1670M-11(2018) Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials" 2018,ASTM,"D975-18a Standard Specification for Diesel Fuel Oils" 2018,ASTM,"D664-18e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2018,ASTM,"D664-18 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2018,ASTM,"D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2018,ASTM,"D445-18 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)" 2018,ASTM,"D396-18a Standard Specification for Fuel Oils" 2018,ASTM,"D256-10(2018) Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics" 2018,ASTM,"D228/D228M-18 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing" 2018,ASTM,"D227/D227M-03(2018) Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing" 2018,ASTM,"D117-18 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids" 2004,ASTM,"E874-04 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels" 2013,ASTM,"E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels" 2006,ASTM,"E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels" 1998,ASTM,"E873-82(1998) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels" 2018,ASTM,"D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2018,ASTM,"D86-18 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure" 2012,ASTM,"E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems" 2018,ASTM,"D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)" 2018,ASTM,"C1859-18 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications" 2018,ASTM,"C1818-18 Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2016,ASTM,"D395-16 Standard Test Methods for Rubber Property—Compression Set" 2018,ASTM,"C1789-14(2018) Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels" 2018,ASTM,"C1781/C1781M-18 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems" 2018,ASTM,"C1765-18 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C1764-12(2018) Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications" 2018,ASTM,"C1743-18 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction" 2018,ASTM,"C1741-18 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout" 2018,ASTM,"C1722-18 Standard Guide for Repair and Restoration of Dimension Stone" 2018,ASTM,"C1716/C1716M-18a Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms" 2018,ASTM,"C1707-18 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes " 2018,ASTM,"C1695-18a Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service" 2018,ASTM,"C1692-18 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry" 2018,ASTM,"C1629/C1629M-18a Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels" 2017,ASTM,"C1628-17e1 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets" 2018,ASTM,"C1617-18a Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals" 2018,ASTM,"C1611/C1611M-18 Standard Test Method for Slump Flow of Self-Consolidating Concrete" 2018,ASTM,"C1586-18 Standard Guide for Quality Assurance of Mortars" 2018,ASTM,"C1577-18 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD" 1997,ASTM,"E867-97 Terminology Relating to Vehicle-Pavement Systems" 2018,ASTM,"C1574-04(2018) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation" 2018,ASTM,"C1536-18 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants" 2018,ASTM,"C1496-18 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades" 2018,ASTM,"C1491-18 Standard Specification for Concrete Roof Pavers" 2004,ASTM,"E867-04 Terminology Relating to Vehicle-Pavement Systems" 2002,ASTM,"E867-02a Terminology Relating to Vehicle-Pavement Systems" 2006,ASTM,"E867-06 Standard Terminology Relating to Vehicle-Pavement Systems" 2011,ASTM,"E866-11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels (Redline)" 2018,ASTM,"C1484-10(2018) Standard Specification for Vacuum Insulation Panels" 2018,ASTM,"C1478M-18 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)" 2018,ASTM,"C1478-18 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals" 2018,ASTM,"C1384-18e1 Standard Specification for Admixtures for Masonry Mortars" 2018,ASTM,"C1381/C1381M-97(2018) Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts" 2018,ASTM,"C1364-18 Standard Specification for Architectural Cast Stone" 2018,ASTM,"C1330-18 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants" 2018,ASTM,"C1314-18 Standard Test Method for Compressive Strength of Masonry Prisms" 2018,ASTM,"C1289-18a Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board" 2018,ASTM,"C1280-18 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing" 2018,ASTM,"C1202-18 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration" 2018,ASTM,"C1126-18 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation" 2018,ASTM,"C1088-18 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale" 2018,ASTM,"C1048-18 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass" 2011,ASTM,"E866-11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels" 2000,ASTM,"E866-00 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels" 2005,ASTM,"E866-05 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels" 2012,ASTM,"E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (Redline)" 2018,ASTM,"C1032-18 Standard Specification for Woven Wire Plaster Base" 2018,ASTM,"C977-18 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization" 2018,ASTM,"C933-18 Standard Specification for Welded Wire Lath" 2018,ASTM,"C923-18 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals" 2018,ASTM,"C923M-18 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)" 2018,ASTM,"C904-01(2018) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials" 2018,ASTM,"C892-18a Standard Specification for High-Temperature Fiber Blanket Thermal Insulation" 2018,ASTM,"C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone" 2018,ASTM,"C847-18 Standard Specification for Metal Lath" 2018,ASTM,"C841-03(2018) Standard Specification for Installation of Interior Lathing and Furring" 2018,ASTM,"C840-18b Standard Specification for Application and Finishing of Gypsum Board" 2018,ASTM,"C840-18a Standard Specification for Application and Finishing of Gypsum Board" 2018,ASTM,"C807-18 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle" 2018,ASTM,"C780-18a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry" 2012,ASTM,"E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels" 1999,ASTM,"E865-99e1 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels" 2008,ASTM,"E865-08 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels" 2003,ASTM,"E865-03 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels" 2012,ASTM,"E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels (Redline)" 2012,ASTM,"E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels" 1998,ASTM,"E864-98e1 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels" 1998,ASTM,"E864-98 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels" 2008,ASTM,"E864-08 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels" 2003,ASTM,"E864-03 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels" 2015,ASTM,"E859/E859M-93(2015)e1 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members" 2011,ASTM,"E859-93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members" 2018,ASTM,"C687-18 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation" 2015,ASTM,"D395-15 Standard Test Methods for Rubber Property—Compression Set" 2000,ASTM,"E859-93(2000) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members" 2006,ASTM,"E859-93(2006) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members" 2013,ASTM,"E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading" 1995,ASTM,"E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading" 2000,ASTM,"E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading" 2018,ASTM,"C655M-18 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)" 2008,ASTM,"E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading" 2015,ASTM,"E84-15b Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C655-18 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C615/C615M-18e1 Standard Specification for Granite Dimension Stone" 2018,ASTM,"C596-18 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement" 2018,ASTM,"C587-04(2018) Standard Specification for Gypsum Veneer Plaster" 2018,ASTM,"C580-18 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes" 2018,ASTM,"C579-18 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes" 2018,ASTM,"C563-18 Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement" 2018,ASTM,"C549-18 Standard Specification for Perlite Loose Fill Insulation" 2014,ASTM,"E84-14 Standard Test Method for Surface Burning Characteristics of Building Materials" 2015,ASTM,"E84-15 Standard Test Method for Surface Burning Characteristics of Building Materials" 1989,ASTM,"E84-89a Standard Test Method for Surface Burning Characteristics of Building Materials" 2015,ASTM,"E84-15a Standard Test Method for Surface Burning Characteristics of Building Materials" 2013,ASTM,"E84-13a Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C531-18 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes" 2013,ASTM,"E84-13 Standard Test Method for Surface Burning Characteristics of Building Materials" 1981,ASTM,"E84-81a Standard Test Method for Surface Burning Characteristics Of Building Materials" 1998,ASTM,"E84-98e1 Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C507M-18 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)" 2018,ASTM,"C507-18a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C506M-18 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)" 2018,ASTM,"C506-18 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C451-18 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)" 2018,ASTM,"C413-18 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes" 2018,ASTM,"C401-12(2018) Standard Classification of Alumina and Alumina-Silicate Castable Refractories" 2018,ASTM,"C359-18 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)" 2014,ASTM,"C349-14 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)" 2018,ASTM,"C349-18 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)" 2018,ASTM,"C348-18 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars" 2018,ASTM,"C318/C318M-13(2018) Standard Specification for Gypsum Formboard" 2018,ASTM,"C307-18 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings" 2018,ASTM,"C295/C295M-18a Standard Guide for Petrographic Examination of Aggregates for Concrete" 2012,ASTM,"E84-12a Standard Test Method for Surface Burning Characteristics of Building Materials " 2012,ASTM,"E84-12b Standard Test Method for Surface Burning Characteristics of Building Materials " 2012,ASTM,"E84-12c Standard Test Method for Surface Burning Characteristics of Building Materials" 2011,ASTM,"E84-11c Standard Test Method for Surface Burning Characteristics of Building Materials " 2011,ASTM,"E84-11a Standard Test Method for Surface Burning Characteristics of Building Materials" 2011,ASTM,"E84-11 Standard Test Method for Surface Burning Characteristics of Building Materials" 2010,ASTM,"E84-10b Standard Test Method for Surface Burning Characteristics of Building Materials" 2010,ASTM,"E84-10a Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C273/C273M-18 Standard Test Method for Shear Properties of Sandwich Core Materials" 2018,ASTM,"C266-18 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles" 2018,ASTM,"C207-18 Standard Specification for Hydrated Lime for Masonry Purposes" 2018,ASTM,"C204-18 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus" 2018,ASTM,"C191-18a Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle" 2018,ASTM,"C167-18 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations" 2018,ASTM,"C125-18b Standard Terminology Relating to Concrete and Concrete Aggregates" 2010,ASTM,"E84-10 Standard Test Method for Surface Burning Characteristics of Building Materials" 2012,ASTM,"E84-12 Standard Test Method for Surface Burning Characteristics of Building Materials " 2018,ASTM,"C99/C99M-18 Standard Test Method for Modulus of Rupture of Dimension Stone" 2018,ASTM,"C76M-18a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)" 2018,ASTM,"C76-18a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C51-18 Standard Terminology Relating to Lime and Limestone (as used by the Industry)" 2018,ASTM,"C27-98(2018) Standard Classification of Fireclay and High-Alumina Refractory Brick" 2008,ASTM,"E84-08a Standard Test Method for Surface Burning Characteristics of Building Materials" 2005,ASTM,"E84-05e1 Standard Test Method for Surface Burning Characteristics of Building Materials" 2011,ASTM,"E84-11b Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E84-09c Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E84-09b Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E84-09a Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E84-09 Standard Test Method for Surface Burning Characteristics of Building Materials" 2008,ASTM,"E84-08 Standard Test Method for Surface Burning Characteristics of Building Materials" 2007,ASTM,"E84-07b Standard Test Method for Surface Burning Characteristics of Building Materials" 2007,ASTM,"E84-07a Standard Test Method for Surface Burning Characteristics of Building Materials" 2007,ASTM,"E84-07 Standard Test Method for Surface Burning Characteristics of Building Materials" 2006,ASTM,"E84-06a Standard Test Method for Surface Burning Characteristics of Building Materials" 2006,ASTM,"E84-06 Standard Test Method for Surface Burning Characteristics of Building Materials" 2005,ASTM,"E84-05 Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C11-18b Standard Terminology Relating to Gypsum and Related Building Materials and Systems" 2018,ASTM,"C11-18a Standard Terminology Relating to Gypsum and Related Building Materials and Systems" 2018,ASTM,"C5-18 Standard Specification for Quicklime for Structural Purposes" 2018,ASTM,"B902/B902M-13(2018) Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction" 2018,ASTM,"B882-10(2018) Standard Specification for Pre-Patinated Copper for Architectural Applications" 2018,ASTM,"B869-07(2018) Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire" 2018,ASTM,"B837-18 Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems" 2004,ASTM,"E84-04 Standard Test Method for Surface Burning Characteristics of Building Materials" 2018,ASTM,"C1738/C1738M-18 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes" 2003,ASTM,"E84-03b Standard Test Method for Surface Burning Characteristics of Building Materials" 2003,ASTM,"E84-03 Standard Test Method for Surface Burning Characteristics of Building Materials" 2001,ASTM,"E84-01 Standard Test Method for Surface Burning Characteristics of Building Materials" 2017,ASTM,"C1712-17 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test" 2018,ASTM,"B738-13(2018) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors" 2018,ASTM,"B564-18 Standard Specification for Nickel Alloy Forgings" 2018,ASTM,"B539-18 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)" 2018,ASTM,"B416-98(2018) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors" 2018,ASTM,"B283/B283M-18a Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)" 2018,ASTM,"B258-18 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors" 2018,ASTM,"B249/B249M-18a Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings" 2018,ASTM,"B148-18 Standard Specification for Aluminum-Bronze Sand Castings" 2018,ASTM,"C1709-18 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete" 2018,ASTM,"B124/B124M-18a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes" 2018,ASTM,"B117-18 Standard Practice for Operating Salt Spray (Fog) Apparatus" 2018,ASTM,"B111/B111M-18a Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock" 2018,ASTM,"B36/B36M-18 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar" 2018,ASTM,"C1695-18 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service " 2018,ASTM,"B3-13(2018) Standard Specification for Soft or Annealed Copper Wire" 2017,ASTM,"C1691-11(2017) Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units" 2018,ASTM,"B2-13(2018) Standard Specification for Medium-Hard-Drawn Copper Wire" 2018,ASTM,"B1-13(2018) Standard Specification for Hard-Drawn Copper Wire" 2018,ASTM,"A1064/A1064M-18a Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete" 2018,ASTM,"A1064/A1064M-18 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete" 2018,ASTM,"A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings" 2018,ASTM,"A1016/A1016M-18a Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes" 2018,ASTM,"A955/A955M-18b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement" 2018,ASTM,"A955/A955M-18a Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement" 2018,ASTM,"A924/A924M-18 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process" 2018,ASTM,"A888-18a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications" 2018,ASTM,"A755/A755M-18 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products" 2018,ASTM,"A746-18 Standard Specification for Ductile Iron Gravity Sewer Pipe" 2018,ASTM,"A716-18 Standard Specification for Ductile Iron Culvert Pipe" 2018,ASTM,"A709/A709M-18 Standard Specification for Structural Steel for Bridges" 2018,ASTM,"A704/A704M-18 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement" 2018,ASTM,"A674-18 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids" 2014,ASTM,"A595/A595M-14 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use" 2018,ASTM,"A595/A595M-18 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use" 2018,ASTM,"A518/A518M-99(2018) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings" 2018,ASTM,"A514/A514M-18 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding" 2018,ASTM,"A480/A480M-18a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip" 2018,ASTM,"A395/A395M-99(2018) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures" 2018,ASTM,"A377-18 Standard Index of Specifications for Ductile Iron Pressure Pipe" 2017,ASTM,"A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners" 2018,ASTM,"A333/A333M-18 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness" 2018,ASTM,"A312/A312M-18a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes" 2018,ASTM,"A312/A312M-18 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes" 2018,ASTM,"A252-10(2018) Standard Specification for Welded and Seamless Steel Pipe Piles" 2018,ASTM,"A240/A240M-18 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications" 2018,ASTM,"A234/A234M-18a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service" 2018,ASTM,"A213/A213M-18b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes" 2018,ASTM,"A194/A194M-18 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both" 2018,ASTM,"A182/A182M-18a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service" 2018,ASTM,"A109/A109M-16(2018) Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled" 2018,ASTM,"A108-18 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished" 2018,ASTM,"A47/A47M-99(2018)e1 Standard Specification for Ferritic Malleable Iron Castings" 2018,ASTM,"C1681-18 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain" 2017,ASTM,"C1679-17 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry" 2017,ASTM,"C1677-11a(2017) Standard Specification for Joints for Concrete Box, Using Rubber Gaskets" 2018,ASTM,"C1675-18 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers" 2017,ASTM,"C1675-17a Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers" 2017,ASTM,"C1670/C1670M-17 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units" 2018,ASTM,"C1660-10(2018) Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry" 2017,ASTM,"C1644-06(2017) Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes" 2017,ASTM,"C1623-17a Standard Specification for Manufactured Concrete Masonry Lintels" 2017,ASTM,"C1619-11(2017) Standard Specification for Elastomeric Seals for Joining Concrete Structures" 2018,ASTM,"C1616-07(2018) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight" 1996,ASTM,"D3877-96 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures" 2017,ASTM,"C1613-17 Standard Specification for Precast Concrete Grease Interceptor Tanks" 2016,ASTM,"D3852-16 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid (Redline)" 2016,ASTM,"D3852-16 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid" 2016,ASTM,"D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels (Redline)" 2016,ASTM,"D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels" 2016,ASTM,"D3828-16 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester" 2016,ASTM,"D3805/D3805M-16 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings (Redline)" 2016,ASTM,"D3805/D3805M-16 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings" 2018,ASTM,"C1589/C1589M-18 Standard Practice for Outdoor Weathering of Construction Seals and Sealants" 2016,ASTM,"D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon (Redline)" 2016,ASTM,"D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon" 2016,ASTM,"D3792-16 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph (Redline)" 2016,ASTM,"D3792-16 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph" 2017,ASTM,"C1586-17 Standard Guide for Quality Assurance of Mortars" 2018,ASTM,"C1581/C1581M-18 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage" 2017,ASTM,"C1565-17 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements" 2001,ASTM,"D3690-95a(2001) Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor" 2017,ASTM,"C1563-08(2017) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications" 2018,ASTM,"C1540-18 Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings" 2001,ASTM,"D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22" 2018,ASTM,"C1534-18 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems" 2018,ASTM,"C1528/C1528M-18 Standard Guide for Selection of Dimension Stone" 2017,ASTM,"C1528/C1528M-17a Standard Guide for Selection of Dimension Stone" 2017,ASTM,"C1528/C1528M-17 Standard Guide for Selection of Dimension Stone" 2018,ASTM,"C1527/C1527M-11(2018) Standard Specification for Travertine Dimension Stone" 2017,ASTM,"C1519-10(2017) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures" 1996,ASTM,"D3551-90(1996)e1 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer" 2018,ASTM,"C1513-18 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections" 2016,ASTM,"D3487-16 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus (Redline)" 2016,ASTM,"D3487-16 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus" 2016,ASTM,"D3462/D3462M-16 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules (Redline)" 2016,ASTM,"D3462/D3462M-16 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules" 1997,ASTM,"D345-97 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications" 2017,ASTM,"C1506-17 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters" 2012,ASTM,"D3279-12e1 Standard Test Method for n-Heptane Insolubles" 2016,ASTM,"D3273-16 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber (Redline)" 2016,ASTM,"D3273-16 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber" 2017,ASTM,"C1483/C1483M-17 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings" 2016,ASTM,"D3262-16 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe (Redline)" 2016,ASTM,"D3262-16 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe" 2016,ASTM,"D3244-16 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications (Redline)" 2016,ASTM,"D3244-16 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications" 2017,ASTM,"C1482-17 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation" 2017,ASTM,"C1461-08(2017) Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use" 2017,ASTM,"C1460-17 Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground" 2018,ASTM,"C1451-18 Standard Practice for Determining Variability of Concrete-Making Materials From a Single Source" 2016,ASTM,"D3160-16 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) (Redline)" 2016,ASTM,"D3160-16 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)" 2016,ASTM,"D312/D312M-16 Standard Specification for Asphalt Used in Roofing" 2015,ASTM,"D312/D312M-15 Standard Specification for Asphalt Used in Roofing" 2016,ASTM,"D3044-16 Standard Test Method for Shear Modulus of Wood-Based Structural Panels (Redline)" 2016,ASTM,"D3044-16 Standard Test Method for Shear Modulus of Wood-Based Structural Panels" 2015,ASTM,"D3034-15e1 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings" 2015,ASTM,"D3034-15 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings" 2017,ASTM,"C1440-17 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 2016,ASTM,"D2973-16 Standard Test Method for Total Nitrogen in Peat Materials (Redline)" 2016,ASTM,"D2973-16 Standard Test Method for Total Nitrogen in Peat Materials" 2016,ASTM,"D2859-16 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials (Redline)" 2016,ASTM,"D2859-16 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials" 2016,ASTM,"D2843-16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics (Redline)" 2016,ASTM,"D2843-16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics" 2017,ASTM,"C1438-13(2017) Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar" 2018,ASTM,"C1433M-18 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)" 2017,ASTM,"C1385/C1385M-10(2017) Standard Practice for Sampling Materials for Shotcrete" 2017,ASTM,"C1384-17 Standard Specification for Admixtures for Masonry Mortars" 2017,ASTM,"C1372-17 Standard Specification for Dry-Cast Segmental Retaining Wall Units" 2018,ASTM,"C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis" 2017,ASTM,"C1364-17 Standard Specification for Architectural Cast Stone" 2016,ASTM,"D2582-16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting (Redline)" 2016,ASTM,"D2582-16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting" 2016,ASTM,"D2439-16 Standard Specification for Refined Phenol (Redline)" 2016,ASTM,"D2439-16 Standard Specification for Refined Phenol" 1997,ASTM,"D2395-93(1997)e1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials" 2004,ASTM,"D2360-04a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography" 2016,ASTM,"D2359-16 Standard Specification for Refined Benzene-535" 2016,ASTM,"D2344/D2344M-16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates (Redline)" 2016,ASTM,"D2344/D2344M-16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates" 2000,ASTM,"E84-00a Standard Test Method for Surface Burning Characteristics of Building Materials" 2013,ASTM,"E837-13a Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2013,ASTM,"E837-13 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2008,ASTM,"E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 1999,ASTM,"E837-99 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2001,ASTM,"E837-01 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2001,ASTM,"E837-01e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2008,ASTM,"E837-08e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2008,ASTM,"E837-08 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method" 2013,ASTM,"E833-13b Standard Terminology of Building Economics" 2013,ASTM,"E833-13a Standard Terminology of Building Economics" 2014,ASTM,"E833-14 Standard Terminology of Building Economics" 2013,ASTM,"E833-13 Standard Terminology of Building Economics" 2012,ASTM,"E833-12 Standard Terminology of Building Economics" 2009,ASTM,"E833-09a Standard Terminology of Building Economics" 2009,ASTM,"E833-09 Standard Terminology of Building Economics" 2008,ASTM,"E833-08 Standard Terminology of Building Economics" 2006,ASTM,"E833-06 Standard Terminology of Building Economics" 2004,ASTM,"E833-04 Standard Terminology of Building Economics" 2002,ASTM,"E833-02a Standard Terminology of Building Economics" 2002,ASTM,"E833-02 Standard Terminology of Building Economics" 2001,ASTM,"E833-01a Standard Terminology of Building Economics" 2001,ASTM,"E833-01 Standard Terminology of Building Economics" 2000,ASTM,"E833-00 Standard Terminology of Building Economics" 2014,ASTM,"E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2013,ASTM,"E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2005,ASTM,"E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2000,ASTM,"E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2003,ASTM,"E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2012,ASTM,"E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis " 2006,ASTM,"E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis" 2010,ASTM,"E83-10a Standard Practice for Verification and Classification of Extensometer Systems" 2017,ASTM,"C1335-12(2017) Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation" 2018,ASTM,"C1277-18 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings" 2017,ASTM,"C1265-17 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications" 2016,ASTM,"C1262/C1262M-16 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units" 2010,ASTM,"E83-10 Standard Practice for Verification and Classification of Extensometer Systems" 2006,ASTM,"E83-06 Standard Practice for Verification and Classification of Extensometer Systems" 2002,ASTM,"E83-02 Standard Practice for Verification and Classification of Extensometer System" 2000,ASTM,"E83-00 Standard Practice for Verification and Classification of Extensometer" 2013,ASTM,"E814-13a Standard Test Method for Fire Tests of Penetration Firestop Systems (Redline)" 2013,ASTM,"E814-13a Standard Test Method for Fire Tests of Penetration Firestop Systems" 2013,ASTM,"E814-13 Standard Test Method for Fire Tests of Penetration Firestop Systems" 2011,ASTM,"E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems" 2011,ASTM,"E814-11 Standard Test Method for Fire Tests of Penetration Firestop Systems" 2010,ASTM,"E814-10 Standard Test Method for Fire Tests of Penetration Firestop Systems" 2009,ASTM,"E814-09 Standard Test Method for Fire Tests of Penetration Firestop Systems" 2008,ASTM,"E814-08b Standard Test Method for Fire Tests of Penetration Firestop Systems" 2008,ASTM,"E814-08a Standard Test Method for Fire Tests of Penetration Firestop Systems" 2008,ASTM,"E814-08 Standard Test Method for Fire Tests of Through-Penetration Fire Stops" 2006,ASTM,"E814-06 Standard Test Method for Fire Tests of Through-Penetration Fire Stops" 2002,ASTM,"E814-02 Standard Test Method for Fire Tests of Through-Penetration Fire Stops" 2017,ASTM,"C1261-13(2017)e1 Standard Specification for Firebox Brick for Residential Fireplaces" 2000,ASTM,"E814-00 Standard Test Method for Fire Tests of Through-Penetration Fire Stops" 2014,ASTM,"E800-14 Standard Guide for Measurement of Gases Present or Generated During Fires" 2014,ASTM,"E800-14 Standard Guide for Measurement of Gases Present or Generated During Fires (Redline)" 1999,ASTM,"E800-99 Standard Guide for Measurement of Gases Present or Generated During Fires" 2007,ASTM,"E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires" 2006,ASTM,"E800-06 Standard Guide for Measurement of Gases Present or Generated During Fires" 2005,ASTM,"E800-05 Standard Guide for Measurement of Gases Present or Generated During Fires" 2001,ASTM,"E800-01 Standard Guide for Measurement of Gases Present or Generated During Fires" 2015,ASTM,"E8/E8M-15 Standard Test Methods for Tension Testing of Metallic Materials" 2015,ASTM,"E8/E8M-15a Standard Test Methods for Tension Testing of Metallic Materials" 2015,ASTM,"E799-03(2015) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis" 1998,ASTM,"E799-92(1998) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis" 2009,ASTM,"E799-03(2009) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis" 2017,ASTM,"C1252-17 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)" 1998,ASTM,"C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)" 2003,ASTM,"C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)" 2018,ASTM,"C1242-18a Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems" 2018,ASTM,"C1242-18 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems" 2017,ASTM,"C1222-17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement" 2003,ASTM,"E799-03 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis" 2017,ASTM,"C1202-17a Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration" 2012,ASTM,"E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests" 2005,ASTM,"E795-05 Standard Practices for Mounting Test Specimens During Sound Absorption Tests" 2000,ASTM,"E795-00 Standard Practices for Mounting Test Specimens During Sound Absorption Tests" 2010,ASTM,"E783-02(2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors" 1993,ASTM,"E783-93 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors" 2002,ASTM,"E783-02 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors" 2015,ASTM,"E782-95(2015) Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode" 1995,ASTM,"E782-95 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode" 2001,ASTM,"E782-95(2001) Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode" 2007,ASTM,"E782-95(2007) Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode" 2015,ASTM,"E781-86(2015) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates" 2003,ASTM,"E781-86(2003) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates" 2009,ASTM,"E781-86(2009) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates" 1996,ASTM,"E781-86(1996) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates" 2010,ASTM,"E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 1999,ASTM,"E779-99 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 2003,ASTM,"E779-03 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 2014,ASTM,"E77-14 Standard Test Method for Inspection and Verification of Thermometers" 1966,ASTM,"E77-66 Standard Method for Inspection, Test, And Standardization Of Liquid-in-Glass Thermometers" 2003,ASTM,"E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers" 1998,ASTM,"E77-98 Standard Test Method for Inspection and Verification of Thermometers" 2007,ASTM,"E77-07 Standard Test Method for Inspection and Verification of Thermometers" 2015,ASTM,"E761/E761M-92(2015)e1 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members" 2011,ASTM,"E761-92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members" 2005,ASTM,"E761-92(2005) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members" 2000,ASTM,"E761-92(2000) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members" 2015,ASTM,"E760/E760M-92(2015)e1 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members" 2011,ASTM,"E760-92(2011) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members" 2005,ASTM,"E760-92(2005) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members" 2000,ASTM,"E760-92(2000) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members" 2015,ASTM,"E759/E759M-92(2015)e1 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members" 2011,ASTM,"E759-92(2011) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members" 2005,ASTM,"E759-92(2005) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members" 2000,ASTM,"E759-92(2000) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members" 2004,ASTM,"E756-04e1 Standard Test Method for Measuring Vibration-Damping Properties of Materials" 2010,ASTM,"E756-05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials" 1998,ASTM,"E756-98 Standard Test Method for Measuring Vibration-Damping Properties of Materials" 2005,ASTM,"E756-05 Standard Test Method for Measuring Vibration-Damping Properties of Materials" 2004,ASTM,"E756-04 Standard Test Method for Measuring Vibration-Damping Properties of Materials" 2014,ASTM,"E754-80(2014)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints" 2000,ASTM,"E754-80(2000)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints" 2006,ASTM,"E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints" 1997,ASTM,"E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology" 2010,ASTM,"E747-04(2010) Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology" 2004,ASTM,"E747-04 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology" 2006,ASTM,"E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution" 2011,ASTM,"E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution" 2006,ASTM,"E741-00(2006) Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution" 2000,ASTM,"E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution" 2013,ASTM,"E74-13 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2013,ASTM,"E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2000,ASTM,"E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2012,ASTM,"E74-12 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2006,ASTM,"E74-06 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2004,ASTM,"E74-04 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2002,ASTM,"E74-02 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2001,ASTM,"E74-01 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines" 2015,ASTM,"E739-10(2015) Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data" 1998,ASTM,"E739-91(1998) Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data" 2004,ASTM,"E739-91(2004) Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data" 2004,ASTM,"E739-91(2004)e1 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data" 2010,ASTM,"E739-10 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data" 2011,ASTM,"E736-00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members" 2006,ASTM,"E736-00(2006) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members" 2000,ASTM,"E736-00 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members" 2013,ASTM,"E73-13 Standard Practice for Static Load Testing of Truss Assemblies" 2007,ASTM,"E73-83(2007) Standard Practice for Static Load Testing of Truss Assemblies" 2002,ASTM,"E73-83(2002) Standard Practice for Static Load Testing of Truss Assemblies" 2014,ASTM,"E72-14 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2013,ASTM,"E72-13a Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2014,ASTM,"E72-14a Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2016,ASTM,"D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates (Redline)" 2016,ASTM,"D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates" 2013,ASTM,"E72-13 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2015,ASTM,"E72-15 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 1977,ASTM,"E72-77 Standard Methods of Conducting Strength Tests Of Panels For Building Construction" 1996,ASTM,"D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors" 1980,ASTM,"E72-80 Standard Methods of Conducting Strength Tests of Panels for Building Construction" 2010,ASTM,"E72-10 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 1998,ASTM,"E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2005,ASTM,"E72-05 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2004,ASTM,"E72-04 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2002,ASTM,"E72-02 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction" 2014,ASTM,"E709-14 Standard Guide for Magnetic Particle Testing" 2015,ASTM,"E709-15 Standard Guide for Magnetic Particle Testing" 1995,ASTM,"E709-95 Standard Guide for Magnetic Particle Examination" 2008,ASTM,"E709-08 Standard Guide for Magnetic Particle Testing" 2001,ASTM,"E709-01 Standard Guide for Magnetic Particle Examination" 2015,ASTM,"E70-07(2015) Standard Test Method for pH of Aqueous Solutions With the Glass Electrode" 2007,ASTM,"E70-07 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode" 2002,ASTM,"E70-97(2002) Standard Test Method for pH of Aqueous Solutions With the Glass Electrode" 1997,ASTM,"E70-97 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode" 1999,ASTM,"E699-99 Standard Criteria for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating Building Components in Accordance with Test Methods Promulgated by ASTM Committee E-6" 2009,ASTM,"E699-09 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components" 2008,ASTM,"E699-03(2008) Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components" 2016,ASTM,"D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil (Redline)" 2016,ASTM,"D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil" 2003,ASTM,"E699-03 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components" 2015,ASTM,"E695-03(2015)e1 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading" 1991,ASTM,"E695-79(1991) Standard Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading" 1997,ASTM,"E695-79(1997)e1 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading" 2016,ASTM,"D2121-16 Standard Test Methods for Polymer Content of Styrene Monomer (Redline)" 2016,ASTM,"D2121-16 Standard Test Methods for Polymer Content of Styrene Monomer" 2015,ASTM,"D2121-15 Standard Test Methods for Polymer Content of Styrene Monomer" 2009,ASTM,"E695-03(2009) Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading" 2003,ASTM,"E695-03 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading" 2015,ASTM,"E691-15 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2018,ASTM,"C1195-18 Standard Test Method for Absorption of Architectural Cast Stone" 2014,ASTM,"E691-14 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2013,ASTM,"E691-13 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2012,ASTM,"E691-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2005,ASTM,"E691-05 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2018,ASTM,"C1194-18 Standard Test Method for Compressive Strength of Architectural Cast Stone" 2008,ASTM,"E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 1996,ASTM,"D2095-96e1 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens" 2016,ASTM,"D1990-16 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens (Redline)" 2016,ASTM,"D1990-16 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens" 2011,ASTM,"E691-11 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2009,ASTM,"E691-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2009,ASTM,"E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 1999,ASTM,"E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method" 2015,ASTM,"E69-15 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus" 2016,ASTM,"D1987-07(2016) Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters" 1999,ASTM,"E69-99 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus" 2007,ASTM,"E69-02(2007) Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus" 2002,ASTM,"E69-02 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus" 2013,ASTM,"E683-91(2013) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings" 1995,ASTM,"E683-91(1995)e1 Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings" 2007,ASTM,"E683-91(2007) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings" 2001,ASTM,"E683-91(2001) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings" 2015,ASTM,"E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 2001,ASTM,"E681-01 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 2016,ASTM,"D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics (Redline)" 2016,ASTM,"D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics" 2009,ASTM,"E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 1998,ASTM,"E681-98 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 2014,ASTM,"F3110-14 Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints" 2018,ASTM,"F3110-14(2018) Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints" 2018,ASTM,"F2951-18 Standard Consumer Safety Specification for Baby Monitors" 2018,ASTM,"F2769-18 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems" 2018,ASTM,"F2657-07(2018) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing" 2018,ASTM,"F2656/F2656M-18a Standard Test Method for Crash Testing of Vehicle Security Barriers" 2018,ASTM,"F2550-13(2018) Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall" 2018,ASTM,"F2164-18 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure" 2018,ASTM,"F2130-11(2018) Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials" 2018,ASTM,"F1908-08(2018) Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas" 2018,ASTM,"F1807-18 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing" 2016,ASTM,"D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils (Redline)" 2016,ASTM,"D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils" 2018,ASTM,"F1379-95(2018) Standard Terminology Relating to Barbed Tape" 2018,ASTM,"F1060-18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)" 2018,ASTM,"F903-18 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids" 2018,ASTM,"F877-18a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems" 2018,ASTM,"F837-13(2018) Standard Specification for Stainless Steel Socket Head Cap Screws" 2018,ASTM,"F436/F436M-18a Standard Specification for Hardened Steel Washers Inch and Metric Dimensions" 2014,ASTM,"D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils" 2004,ASTM,"E681-04 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)" 2012,ASTM,"E674-12 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2018,ASTM,"F436/F436M-18 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions" 2018,ASTM,"F402-18 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings" 2018,ASTM,"E3096-18 Standard Guide for Definition, Selection, and Organization of Key Performance Indicators for Environmental Aspects of Manufacturing Processes" 2017,ASTM,"E3082-17e1 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees" 2018,ASTM,"E2768-11(2018) Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)" 2018,ASTM,"E2759-10(2018) Standard Practice for Highway Traffic Monitoring Truth-in-Data" 2018,ASTM,"E2717-18 Standard Practice for Estimating the Environmental Load of Residential Wastewater" 2018,ASTM,"E2692-10(2018) Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products" 2018,ASTM,"E2606-18 Standard Practice for Receipt Notification as a Result of Tangible Asset Movement" 2018,ASTM,"E2561-07a(2018) Standard Practice for the Installation of Inductive Loop Detectors" 2018,ASTM,"E2499-18 Standard Practice for Classification of Asset Location Information" 2018,ASTM,"E2495-18 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition" 2018,ASTM,"E2486/E2486M-13(2018) Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)" 2018,ASTM,"E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings" 2018,ASTM,"E2468-05(2018) Standard Practice for Metadata to Support Archived Data Management Systems" 2018,ASTM,"E2467-05(2018) Standard Practice for Developing Axle Count Adjustment Factors" 2018,ASTM,"E2430/E2430M-13(2018) Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)" 2018,ASTM,"E2415-05(2018) Standard Practice for Installing Piezoelectric Highway Traffic Sensors" 1996,ASTM,"E674-80(1996)e1 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2018,ASTM,"E2395-18 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact" 2018,ASTM,"E2377-18 Standard Specification for Shelter, Electrical Equipment, Lightweight" 2018,ASTM,"E2359/E2359M-13(2018) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly" 2018,ASTM,"E2306-18 Standard Guide for Disposal of Personal Property Assets" 2001,ASTM,"E674-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2004,ASTM,"E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2011,ASTM,"E674-11 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2018,ASTM,"E2273-18 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies" 2018,ASTM,"E2259-03a(2018) Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data" 2018,ASTM,"E2255/E2255M-18a Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings" 2018,ASTM,"E2213-03(2018) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications" 2018,ASTM,"E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories" 2018,ASTM,"E2174-18 Standard Practice for On-Site Inspection of Installed Firestops" 2018,ASTM,"E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)" 2018,ASTM,"E2129-18 Standard Practice for Data Collection for Sustainability Assessment of Building Products" 2018,ASTM,"E2126-11(2018) Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2018,ASTM,"E2098/E2098M-13(2018) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution" 2018,ASTM,"E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances" 2018,ASTM,"E1978-18 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2018,ASTM,"E1977-18 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2009,ASTM,"E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)" 2015,ASTM,"E670-09(2015) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter" 2018,ASTM,"E1975-18 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2009,ASTM,"E670-09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter" 1999,ASTM,"D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus" 2015,ASTM,"E662-15a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2016,ASTM,"D1709-16a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method (Redline)" 2016,ASTM,"D1709-16a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method" 2016,ASTM,"D1709-16 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method" 2014,ASTM,"E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2013,ASTM,"E662-13c Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2018,ASTM,"E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers" 2015,ASTM,"E662-15 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2013,ASTM,"E662-13d Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2013,ASTM,"E662-13a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2013,ASTM,"E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2018,ASTM,"E1946-18 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects" 2013,ASTM,"E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2012,ASTM,"E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials " 2012,ASTM,"E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2003,ASTM,"E662-03e2 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 1997,ASTM,"E662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2009,ASTM,"E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2006,ASTM,"E662-06 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2005,ASTM,"E662-05 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2003,ASTM,"E662-03 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2001,ASTM,"E662-01 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2006,ASTM,"E662-06e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2003,ASTM,"E662-03e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials" 2015,ASTM,"E661-03(2015)e1 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads " 2018,ASTM,"E1554/E1554M-13(2018) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization" 2018,ASTM,"E1355-12(2018) Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2018,ASTM,"E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire" 2018,ASTM,"E1258-88(2018) Standard Test Method for Airflow Calibration of Fan Pressurization Devices" 2018,ASTM,"E1190-11(2018) Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members" 2018,ASTM,"E779-10(2018) Standard Test Method for Determining Air Leakage Rate by Fan Pressurization" 2018,ASTM,"E747-18 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology" 2018,ASTM,"E575-05(2018) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies" 2018,ASTM,"E564-06(2018) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings" 2018,ASTM,"E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction" 2018,ASTM,"E488/E488M-18 Standard Test Methods for Strength of Anchors in Concrete Elements" 2018,ASTM,"E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows" 2018,ASTM,"E308-18 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2018,ASTM,"E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs" 2018,ASTM,"E119-18a Standard Test Methods for Fire Tests of Building Construction and Materials" 2018,ASTM,"E84-18a Standard Test Method for Surface Burning Characteristics of Building Materials" 2009,ASTM,"E661-03(2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads" 2018,ASTM,"E28-18 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus" 1997,ASTM,"E661-88(1997) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads" 2003,ASTM,"E661-03 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads" 2015,ASTM,"E660-90(2015) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine" 2011,ASTM,"E660-90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine" 2007,ASTM,"E660-90(2007) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine" 2017,ASTM,"C1177/C1177M-17 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing" 2018,ASTM,"C1173-18 Standard Specification for Flexible Transition Couplings for Underground Piping Systems" 2017,ASTM,"C1167-11(2017) Standard Specification for Clay Roof Tiles" 2017,ASTM,"C1149-17 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation" 2017,ASTM,"C1136-17a Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation" 2017,ASTM,"C1134-17 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion" 2002,ASTM,"E660-90(2002) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine" 2018,ASTM,"D8125-18 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)" 1996,ASTM,"E660-90(1996) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine" 2015,ASTM,"E659-15 Standard Test Method for Autoignition Temperature of Chemicals" 2014,ASTM,"E659-14 Standard Test Method for Autoignition Temperature of Liquid Chemicals" 2016,ASTM,"D1621-16 Standard Test Method for Compressive Properties of Rigid Cellular Plastics" 2013,ASTM,"E659-13 Standard Test Method for Autoignition Temperature of Liquid Chemicals" 2005,ASTM,"E659-78(2005) Standard Test Method for Autoignition Temperature of Liquid Chemicals" 2000,ASTM,"E659-78(2000) Standard Test Method for Autoignition Temperature of Liquid Chemicals" 1994,ASTM,"E659-78(1994)e1 Standard Test Method for Autoignition Temperature of Liquid Chemicals" 2015,ASTM,"E648-15e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2015,ASTM,"E648-15 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2014,ASTM,"E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2014,ASTM,"E648-14b Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2014,ASTM,"E648-14a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2014,ASTM,"E648-14 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 1978,ASTM,"E648-78 Standard Test Method for Critical Radiant Flux Of Floor-Covering Systems Using A Radiant Heat Energy Source" 2018,ASTM,"D7989-18 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels" 2018,ASTM,"D7897-18 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance" 2018,ASTM,"D7862-18 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D7741/D7741M-18 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer" 1997,ASTM,"E648-97e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2018,ASTM,"D7663-12(2018)e1 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations" 2018,ASTM,"D7654/D7654M-10(2018) Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer" 2018,ASTM,"D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils" 2018,ASTM,"D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder" 2018,ASTM,"D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens" 2018,ASTM,"D7239-13(2018) Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications" 2018,ASTM,"D7179-18 Standard Test Method for Determining Geonet Breaking Force" 2018,ASTM,"D7176-06(2018) Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications" 2018,ASTM,"D7128-18 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation" 2018,ASTM,"D7099-04(2018) Standard Terminology Relating to Frozen Soil and Rock" 2010,ASTM,"E648-10e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2010,ASTM,"E648-10 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2009,ASTM,"E648-09a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2009,ASTM,"E648-09 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2008,ASTM,"E648-08b Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2008,ASTM,"E648-08a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2008,ASTM,"E648-08 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2006,ASTM,"E648-06a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2006,ASTM,"E648-06 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2004,ASTM,"E648-04 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2003,ASTM,"E648-03 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2000,ASTM,"E648-00 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source" 2016,ASTM,"D16-16 Standard Terminology for Paint, Related Coatings, Materials, and Applications (Redline)" 2018,ASTM,"D7063/D7063M-18 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples" 2018,ASTM,"D7008-08(2018) Standard Specification for Geosynthetic Alternate Daily Covers" 2018,ASTM,"D6940-18 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids" 2018,ASTM,"D6916-18 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2018,ASTM,"D6859-18 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings" 2018,ASTM,"D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method" 2015,ASTM,"E646-15 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials" 2007,ASTM,"E646-07e1 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials" 2016,ASTM,"D16-16 Standard Terminology for Paint, Related Coatings, Materials, and Applications" 2007,ASTM,"E646-07 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials" 2018,ASTM,"D6768/D6768M-18 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners" 2000,ASTM,"E646-00 Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet Materials" 2015,ASTM,"E643-15 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material" 2009,ASTM,"E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material" 2018,ASTM,"D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method" 1995,ASTM,"E643-84(1995) Standard Test Method for Ball Punch Deformation of Metallic Sheet Material" 2013,ASTM,"E633-13 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air" 2018,ASTM,"D6670-18 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products" 2018,ASTM,"D6638-18 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)" 2018,ASTM,"D6570-18 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber" 2018,ASTM,"D6567-18 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)" 2018,ASTM,"D6521-18 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2018,ASTM,"D6496/D6496M-18 Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners" 2018,ASTM,"D6380/D6380M-03(2018) Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2018,ASTM,"D6356/D6356M-98(2018) Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing" 2018,ASTM,"D6245-18 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation" 2018,ASTM,"D6152/D6152M-12(2018) Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing" 2018,ASTM,"D6141-18 Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids" 2005,ASTM,"E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air" 2000,ASTM,"E633-00 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air" 2014,ASTM,"E631-14 Standard Terminology of Building Constructions" 2018,ASTM,"D6117-18 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes" 2018,ASTM,"D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes" 2018,ASTM,"D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement" 2018,ASTM,"D6108-18 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes" 2014,ASTM,"D6092-14e1 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control" 2018,ASTM,"D6084/D6084M-18 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer" 2018,ASTM,"D6072/D6072M-18 Standard Practice for Obtaining Samples of Geosynthetic Clay Liners" 2018,ASTM,"D5993-18 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners" 2018,ASTM,"D5924-18 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations" 2018,ASTM,"D5890-18 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2018,ASTM,"D5883-18 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 1997,ASTM,"D1598-97 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure" 2018,ASTM,"D5875/D5875M-18 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices" 2018,ASTM,"D5872/D5872M-18 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices" 2018,ASTM,"D5784/D5784M-18 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices" 2018,ASTM,"D5781/D5781M-18 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices" 2018,ASTM,"D5643/D5643M-06(2018) Standard Specification for Coal Tar Roof Cement, Asbestos Free" 2018,ASTM,"D5635/D5635M-18 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens" 2018,ASTM,"D5602/D5602M-18 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens" 2016,ASTM,"D1554-10(2016) Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials" 2018,ASTM,"D5521/D5521M-18 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers" 2017,ASTM,"C1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers" 2017,ASTM,"C1115-17 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories" 2017,ASTM,"C1107/C1107M-17 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)" 2014,ASTM,"C1107/C1107M-14a Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)" 2018,ASTM,"D5516-18 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2018,ASTM,"D5323-92(2018) Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes" 2018,ASTM,"D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles" 2018,ASTM,"D5147/D5147M-18 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material" 2018,ASTM,"D5100/D5100M-95a(2018) Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen" 2018,ASTM,"D5081/D5081M-90(2018) Standard Test Method for Aggregate Layer Hiding Power" 2018,ASTM,"D4986-18 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials" 2018,ASTM,"D4972-18 Standard Test Methods for pH of Soils" 2000,ASTM,"D1492-96(2000) Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration" 2018,ASTM,"D4840-99(2018)e1 Standard Guide for Sample Chain-of-Custody Procedures" 2018,ASTM,"D4814-18b Standard Specification for Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4806-18 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel" 2018,ASTM,"D4726-18 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors" 2018,ASTM,"D4585/D4585M-18 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation" 2018,ASTM,"D4280-18 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers" 2018,ASTM,"D4263-83(2018) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method" 2018,ASTM,"D4261-05(2018) Standard Practice for Surface Cleaning Concrete Masonry Units for Coating" 2018,ASTM,"D4145-10(2018) Standard Test Method for Coating Flexibility of Prepainted Sheet" 2018,ASTM,"D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks" 2018,ASTM,"D3960-05(2018) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings" 2018,ASTM,"D3744/D3744M-18 Standard Test Method for Aggregate Durability Index" 2018,ASTM,"D3737-18e1 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)" 2018,ASTM,"D3699-18 Standard Specification for Kerosene" 2018,ASTM,"D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay" 2018,ASTM,"D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks" 2018,ASTM,"D3222-18a Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials" 2018,ASTM,"D3045-18 Standard Practice for Heat Aging of Plastics Without Load" 2018,ASTM,"D2564-12(2018) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems" 2018,ASTM,"D2559-12a(2018) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions" 2018,ASTM,"D2513-18a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings" 2018,ASTM,"D2513-18 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings" 2018,ASTM,"D2412-11(2018) Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading" 2018,ASTM,"D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors" 2018,ASTM,"D2137-11(2018) Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics" 2018,ASTM,"D2000-18 Standard Classification System for Rubber Products in Automotive Applications" 2018,ASTM,"D1835-18 Standard Specification for Liquefied Petroleum (LP) Gases" 2018,ASTM,"D1599-18 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings" 2018,ASTM,"D1187/D1187M-97(2018) Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal" 2018,ASTM,"D1171-18 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)" 2018,ASTM,"D1149-18 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment" 2013,ASTM,"D1143/D1143M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load" 2018,ASTM,"D1066-18 Standard Practice for Sampling Steam" 2018,ASTM,"D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2018,ASTM,"D832-07(2018) Standard Practice for Rubber Conditioning For Low Temperature Testing" 2018,ASTM,"D822/D822M-13(2018) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings" 2018,ASTM,"D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions" 2018,ASTM,"D578/D578M-18 Standard Specification for Glass Fiber Strands" 2018,ASTM,"D570-98(2018) Standard Test Method for Water Absorption of Plastics" 2018,ASTM,"D395-18 Standard Test Methods for Rubber Property—Compression Set" 2018,ASTM,"D173/D173M-03(2018) Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing" 2018,ASTM,"D93-18 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2018,ASTM,"D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2018,ASTM,"D8-18b Standard Terminology Relating to Materials for Roads and Pavements" 2018,ASTM,"D8-18a Standard Terminology Relating to Materials for Roads and Pavements" 2018,ASTM,"C1802-18a Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures" 2017,ASTM,"C1101/C1101M-06(2017) Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation" 2017,ASTM,"C1088-17 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale" 2017,ASTM,"C1077-17 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation" 2018,ASTM,"C1073-18 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali" 2017,ASTM,"C1064/C1064M-17 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete" 2018,ASTM,"C1063-18a Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2016,ASTM,"D1417-16 Standard Test Methods for Rubber Latices—Synthetic (Redline)" 2016,ASTM,"D1417-16 Standard Test Methods for Rubber Latices—Synthetic" 2018,ASTM,"C1782/C1782M-18 Standard Specification for Segmental Concrete Paving Slabs" 2018,ASTM,"C1063-18 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2017,ASTM,"C1063-17b Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2018,ASTM,"C1780-18a Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer" 2018,ASTM,"C1780-18 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer" 2018,ASTM,"C1716/C1716M-18 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms" 2018,ASTM,"C1670/C1670M-18 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units" 2018,ASTM,"C1658/C1658M-18 Standard Specification for Glass Mat Gypsum Panels" 2018,ASTM,"C1629/C1629M-18 Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels" 2018,ASTM,"C1617-18 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals" 2018,ASTM,"C1581/C1581M-18a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage" 2018,ASTM,"C1503-18 Standard Specification for Silvered Flat Glass Mirror" 2018,ASTM,"C1384-18 Standard Specification for Admixtures for Masonry Mortars" 2018,ASTM,"C1374-18 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation" 2018,ASTM,"C1325-18 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units" 2018,ASTM,"C1304-18 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials" 2018,ASTM,"C1293-18 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction" 2018,ASTM,"C1289-18 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board" 2018,ASTM,"C1262/C1262M-18 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units" 2018,ASTM,"C1249-18 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications" 2018,ASTM,"C1248-18 Standard Test Method for Staining of Porous Substrate by Joint Sealants" 2018,ASTM,"C1208/C1208M-18 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels" 2018,ASTM,"C1184-18e1 Standard Specification for Structural Silicone Sealants" 2018,ASTM,"C1184-18 Standard Specification for Structural Silicone Sealants" 2018,ASTM,"C1183/C1183M-13(2018) Standard Test Method for Extrusion Rate of Elastomeric Sealants" 2018,ASTM,"C1178/C1178M-18 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel" 2018,ASTM,"C1091-03a(2018) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines" 2018,ASTM,"C1019-18 Standard Test Method for Sampling and Testing Grout" 2017,ASTM,"C1074-17 Standard Practice for Estimating Concrete Strength by the Maturity Method" 2018,ASTM,"C1063-18b Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster" 2018,ASTM,"C1005-18 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements" 2018,ASTM,"C972-18 Standard Test Method for Compression-Recovery of Tape Sealant" 2018,ASTM,"C955-18e1 Standard Specification for Cold-Formed Steel Structural Framing Members" 2018,ASTM,"C955-18 Standard Specification for Cold-Formed Steel Structural Framing Members" 2018,ASTM,"C946-18 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls" 2018,ASTM,"C936/C936M-18 Standard Specification for Solid Concrete Interlocking Paving Units" 2018,ASTM,"C926-18b Standard Specification for Application of Portland Cement-Based Plaster" 2018,ASTM,"C919-18 Standard Practice for Use of Sealants in Acoustical Applications" 2018,ASTM,"C915-79(2018) Standard Specification for Precast Reinforced Concrete Crib Wall Members" 2018,ASTM,"C901-18 Standard Specification for Prefabricated Masonry Panels" 2018,ASTM,"C856-18a Standard Practice for Petrographic Examination of Hardened Concrete" 2018,ASTM,"C845/C845M-18 Standard Specification for Expansive Hydraulic Cement" 2018,ASTM,"C840-18 Standard Specification for Application and Finishing of Gypsum Board" 2018,ASTM,"C836/C836M-18 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course" 2018,ASTM,"C806-18 Standard Test Method for Restrained Expansion of Expansive Cement Mortar" 2018,ASTM,"C780-18 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry" 2018,ASTM,"C700-18 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated" 2018,ASTM,"C645-18 Standard Specification for Nonstructural Steel Framing Members" 2018,ASTM,"C615/C615M-18 Standard Specification for Granite Dimension Stone" 2018,ASTM,"C497M-18 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)" 2018,ASTM,"C497-18b Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile" 2018,ASTM,"C425-04(2018) Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings" 2018,ASTM,"C308-18 Standard Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars" 2018,ASTM,"C301-18 Standard Test Methods for Vitrified Clay Pipe" 2018,ASTM,"C295/C295M-18 Standard Guide for Petrographic Examination of Aggregates for Concrete" 2016,ASTM,"D140/D140M-16 Standard Practice for Sampling Asphalt Materials (Redline)" 2018,ASTM,"C272/C272M-18 Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions" 2018,ASTM,"C191-18 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle" 2018,ASTM,"C140/C140M-18 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units" 2018,ASTM,"C125-18a Standard Terminology Relating to Concrete and Concrete Aggregates" 2018,ASTM,"C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone" 2018,ASTM,"C31/C31M-18b Standard Practice for Making and Curing Concrete Test Specimens in the Field" 2018,ASTM,"C4-04(2018) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile" 2018,ASTM,"B843-18e1 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection" 2018,ASTM,"B689-97(2018)e1 Standard Specification for Electroplated Engineering Nickel Coatings" 2018,ASTM,"B689-97(2018) Standard Specification for Electroplated Engineering Nickel Coatings" 2018,ASTM,"B632/B632M-18 Standard Specification for Aluminum-Alloy Rolled Tread Plate" 2018,ASTM,"B571-18 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings" 2018,ASTM,"B555-86(2018) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test" 2018,ASTM,"B108/B108M-18e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings" 2018,ASTM,"B85/B85M-18e1 Standard Specification for Aluminum-Alloy Die Castings" 2018,ASTM,"B26/B26M-18e1 Standard Specification for Aluminum-Alloy Sand Castings" 2018,ASTM,"A1018/A1018M-18 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength" 2018,ASTM,"A1011/A1011M-18a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength" 2018,ASTM,"A1011/A1011M-18 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength" 2018,ASTM,"A1008/A1008M-18 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable" 2018,ASTM,"A815/A815M-18 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings" 2018,ASTM,"A794/A794M-18 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled" 2018,ASTM,"A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications" 2018,ASTM,"A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete" 2017,ASTM,"A709/A709M-17e1 Standard Specification for Structural Steel for Bridges" 2018,ASTM,"A703/A703M-18a Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts" 2018,ASTM,"A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates" 2018,ASTM,"A625/A625M-13(2018) Standard Specification for Tin Mill Products, Black Plate, Single-Reduced" 2018,ASTM,"A615/A615M-18e1 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement" 2018,ASTM,"A615/A615M-18 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement" 2018,ASTM,"A575-96(2018) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades" 2018,ASTM,"A513/A513M-18 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing" 2018,ASTM,"A480/A480M-18 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip" 2018,ASTM,"A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling" 2018,ASTM,"A403/A403M-18a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings" 2018,ASTM,"A320/A320M-18 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service" 2018,ASTM,"A313/A313M-18 Standard Specification for Stainless Steel Spring Wire" 2018,ASTM,"A283/A283M-18 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates" 2018,ASTM,"A249/A249M-18 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes" 2018,ASTM,"A229/A229M-18 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs" 2018,ASTM,"A216/A216M-18 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service" 2016,ASTM,"D140/D140M-16 Standard Practice for Sampling Asphalt Materials" 2018,ASTM,"A213/A213M-18a Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes" 2018,ASTM,"A105/A105M-18 Standard Specification for Carbon Steel Forgings for Piping Applications" 2018,ASTM,"C1012/C1012M-18a Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution" 2018,ASTM,"C1012/C1012M-18 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution" 2018,ASTM,"C1002-18 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs" 2018,ASTM,"C989/C989M-18 Standard Specification for Slag Cement for Use in Concrete and Mortars" 2017,ASTM,"C989/C989M-17 Standard Specification for Slag Cement for Use in Concrete and Mortars" 2017,ASTM,"C957/C957M-17 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface" 2015,ASTM,"C957/C957M-15 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface" 2018,ASTM,"C954-18 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness" 2017,ASTM,"C953-17 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory" 2017,ASTM,"C950/C950M-08(2017) Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels" 2017,ASTM,"C945-05(2017) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels" 2017,ASTM,"C943-17 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory" 2016,ASTM,"D1203-16 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods (Redline)" 2016,ASTM,"D1203-16 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods" 2016,ASTM,"D1177-16 Standard Test Method for Freezing Point of Aqueous Engine Coolants" 2018,ASTM,"C930-18 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories" 2016,ASTM,"D1079-16 Standard Terminology Relating to Roofing and Waterproofing (Redline)" 2016,ASTM,"D1079-16 Standard Terminology Relating to Roofing and Waterproofing" 2016,ASTM,"D1073-16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures (Redline)" 2016,ASTM,"D1073-16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures" 2018,ASTM,"C926-18a Standard Specification for Application of Portland Cement-Based Plaster" 2018,ASTM,"C926-18 Standard Specification for Application of Portland Cement-Based Plaster" 2016,ASTM,"D1067-16 Standard Test Methods for Acidity or Alkalinity of Water (Redline)" 2016,ASTM,"D1067-16 Standard Test Methods for Acidity or Alkalinity of Water" 2018,ASTM,"C920-18 Standard Specification for Elastomeric Joint Sealants" 2018,ASTM,"C913-18 Standard Specification for Precast Concrete Water and Wastewater Structures" 2018,ASTM,"C907-17(2018) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method" 2017,ASTM,"C898/C898M-09(2017) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course" 2017,ASTM,"C896-17a Standard Terminology Relating to Clay Products" 2018,ASTM,"C892-18 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation" 2017,ASTM,"C892-17 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation" 2016,ASTM,"C991-16 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings (Redline)" 2016,ASTM,"C991-16 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings" 2018,ASTM,"C871-18 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions" 2018,ASTM,"C858-18 Standard Specification for Underground Precast Concrete Utility Structures" 2000,ASTM,"C985M-00 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)" 2018,ASTM,"C856-18 Standard Practice for Petrographic Examination of Hardened Concrete" 2017,ASTM,"C840-17a Standard Specification for Application and Finishing of Gypsum Board" 2018,ASTM,"C822-18 Standard Terminology Relating to Concrete Pipe and Related Products" 2000,ASTM,"C985-00 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe" 2018,ASTM,"C794-18 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants" 2017,ASTM,"C786/C786M-17 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods" 2018,ASTM,"C782-13(2018) Standard Test Method for Softness of Preformed Tape Sealants" 2016,ASTM,"C979/C979M-16 Standard Specification for Pigments for Integrally Colored Concrete (Redline)" 2016,ASTM,"C979/C979M-16 Standard Specification for Pigments for Integrally Colored Concrete" 2015,ASTM,"E631-15 Standard Terminology of Building Constructions" 2006,ASTM,"E631-06 Standard Terminology of Building Constructions" 1998,ASTM,"E631-93a(1998)e1 Standard Terminology of Building Constructions" 2015,ASTM,"E605/E605M-93(2015)e1 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2006,ASTM,"E605-93(2006) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2000,ASTM,"E605-93(2000) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2011,ASTM,"E605-93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members" 2015,ASTM,"E604-15 Standard Test Method for Dynamic Tear Testing of Metallic Materials" 2008,ASTM,"E604-83(2008) Standard Test Method for Dynamic Tear Testing of Metallic Materials" 2002,ASTM,"E604-83(2002) Standard Test Method for Dynamic Tear Testing of Metallic Materials" 2013,ASTM,"E603-13 Standard Guide for Room Fire Experiments" 2012,ASTM,"E603-12b Standard Guide for Room Fire Experiments" 2012,ASTM,"E603-12a Standard Guide for Room Fire Experiments" 2012,ASTM,"E603-12 Standard Guide for Room Fire Experiments" 1998,ASTM,"E603-98a Standard Guide for Room Fire Experiments" 2007,ASTM,"E603-07 Standard Guide for Room Fire Experiments" 2006,ASTM,"E603-06 Standard Guide for Room Fire Experiments" 2004,ASTM,"E603-04 Standard Guide for Room Fire Experiments" 2003,ASTM,"E603-03 Standard Guide for Room Fire Experiments" 2001,ASTM,"E603-01 Standard Guide for Room Fire Experiments" 2006,ASTM,"E603-06e1 Standard Guide for Room Fire Experiments" 2009,ASTM,"E6-09be1 Standard Terminology Relating to Methods of Mechanical Testing" 2009,ASTM,"E6-09a Standard Terminology Relating to Methods of Mechanical Testing" 2009,ASTM,"E6-09 Standard Terminology Relating to Methods of Mechanical Testing" 2007,ASTM,"E6-07b Standard Terminology Relating to Methods of Mechanical Testing" 2007,ASTM,"E6-07a Standard Terminology Relating to Methods of Mechanical Testing" 2007,ASTM,"E6-07 Standard Terminology Relating to Methods of Mechanical Testing" 2006,ASTM,"E6-06 Standard Terminology Relating to Methods of Mechanical Testing" 2003,ASTM,"E6-03 Standard Terminology Relating to Methods of Mechanical Testing" 2002,ASTM,"E6-02a Standard Terminology Relating to Methods of Mechanical Testing" 1999,ASTM,"E6-99e1 Standard Terminology Relating to Methods of Mechanical Testing" 2002,ASTM,"E6-02 Standard Terminology Relating to Methods of Mechanical Testing" 2003,ASTM,"E6-03e1 Standard Terminology Relating to Methods of Mechanical Testing" 2008,ASTM,"E6-08a Standard Terminology Relating to Methods of Mechanical Testing" 2009,ASTM,"E6-09b Standard Terminology Relating to Methods of Mechanical Testing" 2008,ASTM,"E6-08 Standard Terminology Relating to Methods of Mechanical Testing" 2009,ASTM,"E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures" 1996,ASTM,"E596-96 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures" 2002,ASTM,"E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures" 2002,ASTM,"E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures" 2015,ASTM,"E595-15 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment (Redline)" 2015,ASTM,"E595-15 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 1999,ASTM,"E595-93(1999) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 2007,ASTM,"E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 2006,ASTM,"E595-06 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 2003,ASTM,"E595-93(2003)e2 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 2003,ASTM,"E595-93(2003)e1 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment" 2014,ASTM,"E580/E580M-14 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions" 2014,ASTM,"E576-14 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position" 2014,ASTM,"E576-14 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position (Redline)" 2008,ASTM,"E576-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position" 1999,ASTM,"E576-88(1999)e1 Standard Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position" 1999,ASTM,"E575-99 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies" 2005,ASTM,"E575-05 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies" 2011,ASTM,"E575-05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies" 2012,ASTM,"E564-06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings" 2006,ASTM,"E564-06 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings" 2000,ASTM,"E564-00 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings" 2000,ASTM,"E564-00e1 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings" 2012,ASTM,"E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions " 2012,ASTM,"E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions (Redline)" 1993,ASTM,"E557-93 Standard Guide for The Installation of Operable Partitions" 2006,ASTM,"E557-00(2006) Standard Guide for The Installation of Operable Partitions" 2000,ASTM,"E557-00 Standard Guide for The Installation of Operable Partitions" 2006,ASTM,"E557-00(2006)e1 Standard Guide for The Installation of Operable Partitions" 2015,ASTM,"E556/E556M-11(2015) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)" 2009,ASTM,"E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference (Redline)" 2009,ASTM,"E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference" 2000,ASTM,"E547-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference" 2014,ASTM,"E546-14 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units (Redline)" 2014,ASTM,"E546-14 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units" 2008,ASTM,"E546-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units" 1999,ASTM,"E546-88(1999)e1 Standard Test Method for Frost Point of Sealed Insulating Glass Units" 2013,ASTM,"E543-13 Standard Specification for Agencies Performing Nondestructive Testing (Redline)" 2013,ASTM,"E543-13 Standard Specification for Agencies Performing Nondestructive Testing" 2009,ASTM,"E543-09 Standard Specification for Agencies Performing Nondestructive Testing" 1999,ASTM,"E543-99 Standard Practice for Agencies Performing Nondestructive Testing" 2008,ASTM,"E543-08a Standard Specification for Agencies Performing Nondestructive Testing" 2008,ASTM,"E543-08 Standard Specification for Agencies Performing Nondestructive Testing" 2006,ASTM,"E543-06 Standard Specification for Agencies Performing Nondestructive Testing" 2004,ASTM,"E543-04 Standard Practice for Agencies Performing Nondestructive Testing" 2002,ASTM,"E543-02 Standard Practice for Agencies Performing Nondestructive Testing" 2012,ASTM,"E535-12 Standard Practice for Preparation of Fire-Test-Response Standards " 2012,ASTM,"E535-12 Standard Practice for Preparation of Fire-Test-Response Standards (Redline)" 2009,ASTM,"E535-09 Standard Practice for Preparation of Fire-Test-Response Standards" 2005,ASTM,"E535-05a Standard Practice for Preparation of Fire-Test-Response Standards" 2005,ASTM,"E535-05 Standard Practice for Preparation of Fire-Test-Response Standards" 2000,ASTM,"E535-00 Standard Practice for Preparation of Fire-Test-Response Standards" 2000,ASTM,"E535-00e1 Standard Practice for Preparation of Fire-Test-Response Standards" 2004,ASTM,"E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction" 2011,ASTM,"E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction" 1998,ASTM,"E529-94(1998)e1 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction" 2015,ASTM,"E524-08(2015) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests" 2008,ASTM,"E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests (Redline)" 2000,ASTM,"E524-88(2000) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests" 2008,ASTM,"E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests" 2006,ASTM,"E524-06 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests" 2015,ASTM,"E519/E519M-15 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages (Redline)" 2015,ASTM,"E519/E519M-15 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages" 2015,ASTM,"E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry (Redline)" 2015,ASTM,"E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry" 2010,ASTM,"E517-00(2010) Standard Test Method for Plastic Strain Ratio r for Sheet Metal" 2006,ASTM,"E517-00(2006)e1 Standard Test Method for Plastic Strain Ratio r for Sheet Metal" 2006,ASTM,"E517-00(2006) Standard Test Method for Plastic Strain Ratio r for Sheet Metal" 2000,ASTM,"E517-00 Standard Test Method for Plastic Strain Ratio r for Sheet Metal" 2014,ASTM,"E514/E514M-14a Standard Test Method for Water Penetration and Leakage Through Masonry (Redline)" 2014,ASTM,"E514/E514M-14a Standard Test Method for Water Penetration and Leakage Through Masonry" 2014,ASTM,"E514/E514M-14 Standard Test Method for Water Penetration and Leakage Through Masonry" 2015,ASTM,"E501-08(2015) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests" 1976,ASTM,"E501-76 Standard Specification for Standard Tire For Pavement Skid-Resistance Tests" 2017,ASTM,"C778-17 Standard Specification for Standard Sand" 2000,ASTM,"E501-94(2000) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests" 2008,ASTM,"E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests" 2006,ASTM,"E501-06 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests" 1977,ASTM,"E492-77 Standard Method of Laboratory Measurement Of Impact Sound Transmission Through Floor-Ceiling Assemblies Using The Tapping Machine" 2009,ASTM,"E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine" 2004,ASTM,"E492-04 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine" 1996,ASTM,"E492-90(1996)e1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine" 2015,ASTM,"E488/E488M-15 Standard Test Methods for Strength of Anchors in Concrete Elements" 2008,ASTM,"E478-08 Standard Test Methods for Chemical Analysis of Copper Alloys" 2003,ASTM,"E478-03 Standard Test Methods for Chemical Analysis of Copper Alloys" 1996,ASTM,"E478-89a(1996) Standard Test Methods for Chemical Analysis of Copper Alloys" 2013,ASTM,"E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers" 2013,ASTM,"E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers" 1999,ASTM,"E477-99 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers" 2006,ASTM,"E477-06 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers" 2006,ASTM,"E477-06a Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers" 2013,ASTM,"E456-13ae1 Standard Terminology Relating to Quality and Statistics" 2013,ASTM,"E456-13a Standard Terminology Relating to Quality and Statistics" 2013,ASTM,"E456-13ae2 Standard Terminology Relating to Quality and Statistics" 2013,ASTM,"E456-13 Standard Terminology Relating to Quality and Statistics" 2012,ASTM,"E456-12e1 Standard Terminology Relating to Quality and Statistics" 2012,ASTM,"E456-12 Standard Terminology Relating to Quality and Statistics " 2008,ASTM,"E456-08e4 Standard Terminology Relating to Quality and Statistics " 2002,ASTM,"E456-02 Standard Terminology for Relating to Quality and Statistics" 2008,ASTM,"E456-08 Standard Terminology Relating to Quality and Statistics" 2008,ASTM,"E456-08e3 Standard Terminology Relating to Quality and Statistics" 2008,ASTM,"E456-08e2 Standard Terminology Relating to Quality and Statistics" 2008,ASTM,"E456-08e1 Standard Terminology Relating to Quality and Statistics" 2006,ASTM,"E456-06e1 Standard Terminology Relating to Quality and Statistics" 2006,ASTM,"E456-06 Standard Terminology Relating to Quality and Statistics" 2004,ASTM,"E456-04e1 Standard Terminology Relating to Quality and Statistics" 2002,ASTM,"E456-02e1 Standard Terminology for Relating to Quality and Statistics" 1996,ASTM,"E456-96 Standard Terminology for Relating to Quality and Statistics" 2010,ASTM,"E455-10 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings" 1998,ASTM,"E455-98 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings" 2004,ASTM,"E455-04 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings" 2011,ASTM,"E455-11 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings" 2012,ASTM,"E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2009,ASTM,"E454-09 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2011,ASTM,"E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2004,ASTM,"E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2001,ASTM,"E454-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 1996,ASTM,"E454-80(1996)e1 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)" 2002,ASTM,"E448-82(2002)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials" 2002,ASTM,"E448-82(2002) Standard Practice for Scleroscope Hardness Testing of Metallic Materials" 1997,ASTM,"E448-82(1997)e2 Standard Practice for Scleroscope Hardness Testing of Metallic Materials" 1997,ASTM,"E448-82(1997)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials" 2015,ASTM,"E445/E445M-15 Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires" 2013,ASTM,"E445/E445M-88(2013) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires" 1973,ASTM,"E413-73 Standard Classification for Determination of Sound Transmission Class" 2010,ASTM,"E413-10 Classification for Rating Sound Insulation" 1999,ASTM,"E413-87(1999) Classification for Rating Sound Insulation" 2004,ASTM,"E413-04 Classification for Rating Sound Insulation" 2013,ASTM,"E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques" 2008,ASTM,"E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques" 2002,ASTM,"E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques" 1996,ASTM,"E408-71(1996)e1 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques" 2012,ASTM,"E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows " 1996,ASTM,"E405-89(1996)e1 Standard Test Methods for Wear Testing Rotary Operators for Windows" 2004,ASTM,"E405-04 Standard Test Methods for Wear Testing Rotary Operators for Windows" 2015,ASTM,"E4-15 Standard Practices for Force Verification of Testing Machines" 2014,ASTM,"E4-14 Standard Practices for Force Verification of Testing Machines" 2013,ASTM,"E4-13 Standard Practices for Force Verification of Testing Machines" 1979,ASTM,"E4-79 Standard Methods of Load Verification Of Testing Machines" 2009,ASTM,"E4-09a Standard Practices for Force Verification of Testing Machines" 2009,ASTM,"E4-09 Standard Practices for Force Verification of Testing Machines" 2008,ASTM,"E4-08 Standard Practices for Force Verification of Testing Machines" 2010,ASTM,"E4-10 Standard Practices for Force Verification of Testing Machines" 2007,ASTM,"E4-07 Standard Practices for Force Verification of Testing Machines" 2003,ASTM,"E4-03 Standard Practices for Force Verification of Testing Machines" 2001,ASTM,"E4-01 Standard Practices for Force Verification of Testing Machines" 1999,ASTM,"E4-99 Standard Practices for Force Verification of Testing Machines" 2002,ASTM,"E4-02 Standard Practices for Force Verification of Testing Machines" 2013,ASTM,"E345-93(2013)e1 Standard Test Methods of Tension Testing of Metallic Foil" 1998,ASTM,"E345-93(1998) Standard Test Methods of Tension Testing of Metallic Foil" 2008,ASTM,"E345-93(2008) Standard Test Methods of Tension Testing of Metallic Foil" 2002,ASTM,"E345-93(2002) Standard Test Methods of Tension Testing of Metallic Foil" 2016,ASTM,"E336-16 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2015,ASTM,"E336-15 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2014,ASTM,"E336-14 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2010,ASTM,"E336-10 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2007,ASTM,"E336-07 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2009,ASTM,"E336-09 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2011,ASTM,"E336-11 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 1997,ASTM,"E336-97e1 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings" 1997,ASTM,"E336-97 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings" 2008,ASTM,"E336-08 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings" 2005,ASTM,"E336-05 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings" 1975,ASTM,"E331-70(1975) Standard Test Method for Water Penetration Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference" 2009,ASTM,"E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference (Redline)" 2009,ASTM,"E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference" 2000,ASTM,"E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference" 2014,ASTM,"E330/E330M-14 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" 1979,ASTM,"E330-79 Standard Test Method for Structural Performance Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference" 1990,ASTM,"E330-90 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference" 2010,ASTM,"E330-02(2010) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" 1997,ASTM,"E330-97e1 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference" 2002,ASTM,"E330-02 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" 2013,ASTM,"E329-13c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2013,ASTM,"E329-13b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2014,ASTM,"E329-14a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection (Redline)" 2014,ASTM,"E329-14a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2014,ASTM,"E329-14 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2013,ASTM,"E329-13 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2013,ASTM,"E329-13a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2011,ASTM,"E329-11c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2010,ASTM,"E329-10 Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction" 2009,ASTM,"E329-09 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2011,ASTM,"E329-11b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2011,ASTM,"E329-11a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection" 2011,ASTM,"E329-11 Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction" 2007,ASTM,"E329-07ae1 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2005,ASTM,"E329-05be1 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2008,ASTM,"E329-08 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2007,ASTM,"E329-07a Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2007,ASTM,"E329-07 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2006,ASTM,"E329-06a Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2006,ASTM,"E329-06 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2005,ASTM,"E329-05b Standard Specification for Agencies Engaged in Construction Inspection and/or Testing" 2005,ASTM,"E329-05a Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2005,ASTM,"E329-05 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2003,ASTM,"E329-03 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2002,ASTM,"E329-02 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2001,ASTM,"E329-01a Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2001,ASTM,"E329-01 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2000,ASTM,"E329-00b Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction" 2013,ASTM,"E328-13 Standard Test Methods for Stress Relaxation Tests for Materials and Structures (Redline)" 2013,ASTM,"E328-13 Standard Test Methods for Stress Relaxation Tests for Materials and Structures" 1996,ASTM,"E328-86(1996)e1 Standard Test Methods for Stress Relaxation Tests for Materials and Structures" 2008,ASTM,"E328-02(2008) Standard Test Methods for Stress Relaxation Tests for Materials and Structures" 2002,ASTM,"E328-02 Standard Test Methods for Stress Relaxation Tests for Materials and Structures" 2011,ASTM,"E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes (Redline)" 2011,ASTM,"E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes" 2009,ASTM,"E323-09 Standard Specification for Perforated-Plate Sieves for Testing Purposes" 2004,ASTM,"E323-80(2004) Standard Specification for Perforated-Plate Sieves for Testing Purposes" 2001,ASTM,"E323-80(2001) Standard Specification for Perforated-Plate Sieves for Testing Purposes" 1996,ASTM,"E323-80(1996)e1 Standard Specification for Perforated-Plate Sieves for Testing Purposes" 2015,ASTM,"E313-15 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 2015,ASTM,"E313-15 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates (Redline)" 2015,ASTM,"E313-15e1 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 2010,ASTM,"E313-10 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 1998,ASTM,"E313-98 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 2005,ASTM,"E313-05 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 2000,ASTM,"E313-00 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates" 2006,ASTM,"E309-95(2006) Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation" 2011,ASTM,"E309-11 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation" 2001,ASTM,"E309-95(2001) Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation" 1995,ASTM,"E309-95 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation" 2017,ASTM,"C764-17 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation" 2013,ASTM,"E308-13 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2012,ASTM,"E308-12 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2008,ASTM,"E308-08 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2006,ASTM,"E308-06 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2001,ASTM,"E308-01 Standard Practice for Computing the Colors of Objects by Using the CIE System" 1999,ASTM,"E308-99 Standard Practice for Computing the Colors of Objects by Using the CIE System" 2013,ASTM,"E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester" 2008,ASTM,"E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester" 2003,ASTM,"E303-93(2003) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester" 1998,ASTM,"E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester" 2015,ASTM,"E3015-15 Standard Guide for Management of Customer-Owned Property Assets in Possession of Supplier, Contractor or Subcontractor" 2015,ASTM,"E3014-15 Standard Practice for Managing Sustainability in Dentistry" 2015,ASTM,"E3013/E3013M-15 Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction" 2011,ASTM,"E3-11 Standard Guide for Preparation of Metallographic Specimens" 2011,ASTM,"E3-11 Standard Guide for Preparation of Metallographic Specimens (Redline)" 2007,ASTM,"E3-01(2007)e1 Standard Guide for Preparation of Metallographic Specimens" 2001,ASTM,"E3-01 Standard Practice for Preparation of Metallographic Specimens" 1995,ASTM,"E3-95 Standard Practice for Preparation of Metallographic Specimens" 2007,ASTM,"E3-01(2007) Standard Guide for Preparation of Metallographic Specimens" 2015,ASTM,"E2989-15a Standard Guide for Assessment of Continued Applicability of Fire Test Reports Used in Building Regulation" 2015,ASTM,"E2989-15 Standard Guide for Assessment of Continued Applicability of Fire Test Reports Used in Building Regulation" 2015,ASTM,"E2988-15a Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics" 2015,ASTM,"E2988-15 Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics" 2015,ASTM,"E2986-15 Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes" 2016,ASTM,"E2965-16 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter" 2015,ASTM,"E2965-15 Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter" 2014,ASTM,"E2964-14 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors" 2015,ASTM,"E2963-15 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments" 2014,ASTM,"E2963-14 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments" 2015,ASTM,"E2957-15 Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections " 2013,ASTM,"E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces" 2015,ASTM,"E2954-15 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members" 2015,ASTM,"E2947-15 Standard Guide for Building Enclosure Commissioning" 2014,ASTM,"E2947-14 Standard Guide for Building Enclosure Commissioning" 2013,ASTM,"E2936-13 Standard Guide for Contractor Self Assessment for U.S. Government Property Management Systems" 2015,ASTM,"E2935-15 Standard Practice for Conducting Equivalence Testing in Laboratory Applications" 2014,ASTM,"E2935-14 Standard Practice for Conducting Equivalence Testing in Laboratory Applications" 2013,ASTM,"E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications" 2014,ASTM,"E2925-14 Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function" 2014,ASTM,"E2924-14 Standard Practice for Intumescent Coatings" 2013,ASTM,"E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry" 2013,ASTM,"E2921-13 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems" 2009,ASTM,"E292-09e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials" 2009,ASTM,"E292-09 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials" 2001,ASTM,"E292-01 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials" 1996,ASTM,"E292-83(1996)e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials" 2014,ASTM,"E2914-14 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples" 2014,ASTM,"E2913-14 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples" 2013,ASTM,"E2912-13 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction" 2012,ASTM,"E2910-12 Standard Guide for Preferred Methods for Acceptance of Product" 2014,ASTM,"E290-14 Standard Test Methods for Bend Testing of Material for Ductility" 2014,ASTM,"E290-14 Standard Test Methods for Bend Testing of Material for Ductility (Redline)" 2009,ASTM,"E290-09 Standard Test Methods for Bend Testing of Material for Ductility" 2004,ASTM,"E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility" 1997,ASTM,"E290-97a Standard Test Method for Bend Testing of Material for Ductility" 2013,ASTM,"E290-13 Standard Test Methods for Bend Testing of Material for Ductility" 2013,ASTM,"E29-13 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications (Redline)" 2013,ASTM,"E29-13 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 1990,ASTM,"E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications" 1967,ASTM,"E29-67 Recommended Practice For Indicating Which Places Of Figures Are To Be Considered Significant In Specified Limiting Values" 1980,ASTM,"E29-67(1980)e1 Standard Test Method for Indicating Which Places Of Figures Are To Be Considered Significant In Specified Limiting Values" 2006,ASTM,"E29-06b Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2006,ASTM,"E29-06a Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2006,ASTM,"E29-06 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2004,ASTM,"E29-04 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2002,ASTM,"E29-02e1 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 1999,ASTM,"E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2008,ASTM,"E29-08 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications" 2014,ASTM,"E2886/E2886M-14 Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement" 2013,ASTM,"E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)" 2014,ASTM,"E2872-14 Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus" 2012,ASTM,"E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels" 2012,ASTM,"E2858-12 Standard Practice for Sales of Personal Property" 2015,ASTM,"E2844-15e1 Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit" 2015,ASTM,"E2844-15 Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit" 2011,ASTM,"E2841-11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions" 2015,ASTM,"E2840-11(2015) Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots" 2011,ASTM,"E2840-11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots" 2013,ASTM,"E2837-13 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies" 2011,ASTM,"E2837-11 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies" 2015,ASTM,"E2835-11(2015) Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device" 2011,ASTM,"E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device" 1973,ASTM,"E283-73 Standard Test Method for Rate Of Air Leakage Through Exterior Windows, Curtain Walls, And Doors" 2012,ASTM,"E283-04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 1999,ASTM,"E283-91(1999) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2004,ASTM,"E283-04 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2015,ASTM,"E2819-11(2015) Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL" 2011,ASTM,"E2819-11 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL" 2011,ASTM,"E2817-11 Standard Test Method for Test Fueling Masonry Heaters" 2015,ASTM,"E2816-15a Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2015,ASTM,"E2816-15 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2013,ASTM,"E2816-13a Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2013,ASTM,"E2816-13 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2012,ASTM,"E2816-12 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2012,ASTM,"E2816-12a Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2011,ASTM,"E2816-11 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems" 2011,ASTM,"E2814-11 Standard Guide for Industrial Woven Wire Filter Cloth" 2012,ASTM,"E2813-12 Standard Practice for Building Enclosure Commissioning" 2011,ASTM,"E2812-11 Standard Practice for Uniform Data Management in Asset Management Records Systems" 2011,ASTM,"E2811-11 Standard Practice for Management of Low Risk Property (LRP)" 2014,ASTM,"E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus (Redline)" 2014,ASTM,"E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus" 1982,ASTM,"E28-67(1982)e1 Standard test Method for Softening Point by Ring-and-Ball Apparatus" 1967,ASTM,"E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus" 1977,ASTM,"E28-67(1977) Standard Test Method for Softening Point By Ring-And-Ball Apparatus" 2004,ASTM,"E28-99(2004) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus" 1999,ASTM,"E28-99 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus" 2009,ASTM,"E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus" 2010,ASTM,"E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment" 2010,ASTM,"E2793-10 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment" 2011,ASTM,"E2788-11 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems" 2015,ASTM,"E2786-10(2015) Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems" 2010,ASTM,"E2786-10 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems" 2011,ASTM,"E2785-11 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions" 2011,ASTM,"E2782-11 Standard Guide for Measurement Systems Analysis (MSA)" 2010,ASTM,"E2782-10 Standard Guide for Measurement Systems Analysis (MSA)" 2010,ASTM,"E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters" 2010,ASTM,"E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters" 2014,ASTM,"E2778-14 Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves)" 2014,ASTM,"E2777-14 Standard Guide for Vegetative (Green) Roof Systems" 2011,ASTM,"E2774-11 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2773-11 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2013,ASTM,"E2772-13e1 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2013,ASTM,"E2772-13 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)" 2014,ASTM,"E2762-10(2014) Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL" 2010,ASTM,"E2762-10 Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL" 2010,ASTM,"E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data" 2013,ASTM,"E2750-13 Standard Guide for Extension of Data from Firestop Penetration System Tests Conducted in Accordance with ASTM " 2013,ASTM,"E2750-13e1 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM " 2011,ASTM,"E2750-11 Standard Guide for Extension of Data For Penetrations Seals" 2014,ASTM,"E2749-10(2014) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens" 2015,ASTM,"E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens (Redline)" 2015,ASTM,"E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens" 2015,ASTM,"E2749-15 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens" 2010,ASTM,"E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens" 2012,ASTM,"E2748-12a Standard Guide for Fire-Resistance Experiments (Redline)" 2012,ASTM,"E2748-12a Standard Guide for Fire-Resistance Experiments" 2012,ASTM,"E2748-12 Standard Guide for Fire-Resistance Experiments" 2011,ASTM,"E2748-11 Standard Guide for Fire-Resistance Experiments" 2010,ASTM,"E2748-10 Standard Guide for Fire-Resistance Experiments" 2011,ASTM,"E2747-11 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2746-11 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2745-11 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2743-11 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2742-11 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2011,ASTM,"E2741-11 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences" 2015,ASTM,"E274/E274M-15 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire (Redline)" 2015,ASTM,"E274/E274M-15 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire" 2011,ASTM,"E2728-11 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings" 2010,ASTM,"E2727-10e1 Standard Practice for Assessment of Rainwater Quality" 2010,ASTM,"E2727-10 Standard Practice for Assessment of Rainwater Quality" 2011,ASTM,"E2717-11 Standard Practice for Estimating the Environmental Load of Residential Wastewater" 2009,ASTM,"E2715-09 Standard Practice for Moveable Property Storage" 2015,ASTM,"E2712-15 Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet (Redline)" 2015,ASTM,"E2712-15 Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet" 2009,ASTM,"E2712-09 Standard Test Methods for Forming Superplastic Metallic Sheet" 2009,ASTM,"E2712-09e1 Standard Test Methods for Forming Superplastic Metallic Sheet" 2014,ASTM,"E2709-14 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure" 2014,ASTM,"E2709-14 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure (Redline)" 2014,ASTM,"E2709-14e1 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure" 2012,ASTM,"E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure" 2011,ASTM,"E2709-11 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure" 2009,ASTM,"E2709-09 Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure" 2010,ASTM,"E2709-10 Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure" 2015,ASTM,"E2707-15 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure (Redline)" 2015,ASTM,"E2707-15 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure" 2014,ASTM,"E2707-14 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure" 2009,ASTM,"E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure" 2009,ASTM,"E2696-09 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution" 2013,ASTM,"E2696-09(2013) Standard Practice for Life and Reliability Testing Based on the Exponential Distribution" 2009,ASTM,"E2696-09e1 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution" 2010,ASTM,"E2692-10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ," 2009,ASTM,"E2691-09 Standard Practice for Job Productivity Measurement" 2011,ASTM,"E2691-11 Standard Practice for Job Productivity Measurement" 2010,ASTM,"E2690-10e1 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics" 2010,ASTM,"E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics" 2010,ASTM,"E2690-10 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics" 2010,ASTM,"E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics" 2014,ASTM,"E2676-09(2014) Standard Practice for Tangible Property Mobility Index (MI)" 2009,ASTM,"E2676-09 Standard Practice for Tangible Property Mobility Index (MI)" 2014,ASTM,"E2675-09(2014) Standard Practice for Property Management System Outcomes" 2009,ASTM,"E2675-09 Standard Practice for Property Management System Outcomes" 2009,ASTM,"E2672-09 Standard Practice for Identification and Categorization of Tooling" 2010,ASTM,"E2671-10 Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property" 2009,ASTM,"E2667-09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data" 2009,ASTM,"E2666-09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports" 2008,ASTM,"E2665-08 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data" 2015,ASTM,"E2658-15 Standard Practices for Verification of Speed for Material Testing Machines (Redline)" 2015,ASTM,"E2658-15 Standard Practices for Verification of Speed for Material Testing Machines" 2011,ASTM,"E2658-11 Standard Practices for Verification of Speed for Material Testing Machines" 2014,ASTM,"E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods" 2008,ASTM,"E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods" 2015,ASTM,"E2653-15 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories (Redline)" 2015,ASTM,"E2653-15 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories" 2014,ASTM,"E2653-14 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories" 2009,ASTM,"E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories" 2008,ASTM,"E2653-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories" 2016,ASTM,"E2652-16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C (Redline)" 2016,ASTM,"E2652-16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C" 2012,ASTM,"E2652-12 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C " 2009,ASTM,"E2652-09e1 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C" 2009,ASTM,"E2652-09a Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C" 2009,ASTM,"E2652-09 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C" 2013,ASTM,"E2651-13 Standard Guide for Powder Particle Size Analysis" 2010,ASTM,"E2651-10 Standard Guide for Powder Particle Size Analysis" 2008,ASTM,"E2651-08 Standard Guide for Powder Particle Size Analysis" 2012,ASTM,"E2649-12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy" 2009,ASTM,"E2649-09 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy" 2008,ASTM,"E2638-08 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room" 2010,ASTM,"E2638-10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room (Redline)" 2010,ASTM,"E2638-10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room" 2013,ASTM,"E2637-13 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150" 2008,ASTM,"E2637-08 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150" 2014,ASTM,"E2635-14 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation (Redline)" 2014,ASTM,"E2635-14 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation" 2008,ASTM,"E2635-08 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation" 2015,ASTM,"E2634-11(2015) Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2010,ASTM,"E2634-10 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2011,ASTM,"E2634-11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2008,ASTM,"E2634-08 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems" 2015,ASTM,"E2631-09(2015) Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label" 2009,ASTM,"E2631-09 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label" 2015,ASTM,"C755-10(2015)e1 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation" 2015,ASTM,"E2624-15 Standard Practice for Torque Calibration of Testing Machines " 2009,ASTM,"E2624-09 Standard Practice for Torque Calibration of Testing Machines and Devices" 2018,ASTM,"C754-18 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products" 2015,ASTM,"E2620-15 Standard Classification for Program and Project Estimate Summaries" 2008,ASTM,"E2620-08 Standard Classification for Program and Project Estimate Summaries" 2013,ASTM,"E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances" 2008,ASTM,"E2618-08 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances" 2009,ASTM,"E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances" 2009,ASTM,"E2611-09 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method" 2014,ASTM,"E2608-08(2014) Standard Practice for Equipment Control Matrix (ECM)" 2008,ASTM,"E2608-08 Standard Practice for Equipment Control Matrix (ECM)" 2013,ASTM,"E2607-08(2013) Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements" 2008,ASTM,"E2607-08 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements" 2013,ASTM,"E2606-13 Standard Practice for Receipt Notification as a Result of Tangible Asset Movement (Redline)" 2013,ASTM,"E2606-13 Standard Practice for Receipt Notification as a Result of Tangible Asset Movement" 2008,ASTM,"E2606-08 Standard Practice for Receipt Notification as a Result of Tangible Property Movement" 2013,ASTM,"E2605-13 Standard Practice for Receiving Assets (Redline)" 2013,ASTM,"E2605-13 Standard Practice for Receiving Assets" 2008,ASTM,"E2605-08 Standard Practice for Receiving Property" 2015,ASTM,"E2604-15 Standard Practice for Data Characteristics of Equipment Asset Record (Redline)" 2015,ASTM,"E2604-15 Standard Practice for Data Characteristics of Equipment Asset Record" 2009,ASTM,"E2604-09 Standard Practice for Data Characteristics of Equipment Records" 2015,ASTM,"E2599-15 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2009,ASTM,"E2599-09 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics" 2010,ASTM,"E2599-10 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2011,ASTM,"E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics" 2009,ASTM,"E2599-09a Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics" 2008,ASTM,"E2589-08 Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2008,ASTM,"E2589-08a Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2008,ASTM,"E2589-08b Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2011,ASTM,"E2589-11 Standard Terminology Relating to Nonsieving Methods of Powder Characterization (Redline)" 2011,ASTM,"E2589-11 Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2009,ASTM,"E2589-09 Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2009,ASTM,"E2589-09a Standard Terminology Relating to Nonsieving Methods of Powder Characterization" 2014,ASTM,"E2587-14 Standard Practice for Use of Control Charts in Statistical Process Control" 2014,ASTM,"E2587-14e1 Standard Practice for Use of Control Charts in Statistical Process Control" 2015,ASTM,"E2587-15 Standard Practice for Use of Control Charts in Statistical Process Control" 2007,ASTM,"E2587-07e1 Standard Practice for Use of Control Charts in Statistical Process Control" 2010,ASTM,"E2587-10 Standard Practice for Use of Control Charts in Statistical Process Control" 2012,ASTM,"E2587-12 Standard Practice for Use of Control Charts in Statistical Process Control" 2013,ASTM,"E2586-13 Standard Practice for Calculating and Using Basic Statistics" 2014,ASTM,"E2586-14 Standard Practice for Calculating and Using Basic Statistics" 2012,ASTM,"E2586-12b Standard Practice for Calculating and Using Basic Statistics" 2012,ASTM,"E2586-12 Standard Practice for Calculating and Using Basic Statistics" 2007,ASTM,"E2586-07 Standard Practice for Calculating and Using Basic Statistics" 2010,ASTM,"E2586-10a Standard Practice for Calculating and Using Basic Statistics" 2010,ASTM,"E2586-10 Standard Practice for Calculating and Using Basic Statistics" 2012,ASTM,"E2586-12a Standard Practice for Calculating and Using Basic Statistics" 2015,ASTM,"E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)" 2011,ASTM,"E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)" 2007,ASTM,"E2583-07 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)" 2013,ASTM,"E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics (Redline)" 2013,ASTM,"E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics" 2012,ASTM,"E2579-12 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics" 2011,ASTM,"E2579-11 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics" 2007,ASTM,"E2579-07 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics" 2012,ASTM,"E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics" 2007,ASTM,"E2573-07a Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics" 2007,ASTM,"E2573-07 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics" 2014,ASTM,"E2570/E2570M-07(2014)e1 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage" 2007,ASTM,"E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage" 2009,ASTM,"E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems" 2007,ASTM,"E2568-07 Standard Specification for PB Exterior Insulation and Finish Systems" 2012,ASTM,"E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors" 2007,ASTM,"E2561-07 Standard Practice for Installation of Inductive Loop Detectors" 2007,ASTM,"E2561-07a Standard Practice for the Installation of Inductive Loop Detectors" 2013,ASTM,"E2560-13 Standard Specification for Data Format for Pavement Profile" 2007,ASTM,"E2560-07 Standard Specification for Data Format for Pavement Profile" 2013,ASTM,"E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces (Redline)" 2013,ASTM,"E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces" 2007,ASTM,"E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces" 2008,ASTM,"E2558-08 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces" 2009,ASTM,"E2558-09 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces" 2007,ASTM,"E2558-07e1 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces" 2007,ASTM,"E2557-07 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments" 2012,ASTM,"E2555-07(2012) Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection" 2007,ASTM,"E2555-07 Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection" 2013,ASTM,"E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques (Redline)" 2013,ASTM,"E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques" 2007,ASTM,"E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program" 2015,ASTM,"E2546-15 Standard Practice for Instrumented Indentation Testing (Redline)" 2015,ASTM,"E2546-15 Standard Practice for Instrumented Indentation Testing" 2007,ASTM,"E2546-07e1 Standard Practice for Instrumented Indentation Testing" 2007,ASTM,"E2546-07 Standard Practice for Instrumented Indentation Testing" 2015,ASTM,"E2536-15a Standard Guide for Assessment of Measurement Uncertainty in Fire Tests" 2015,ASTM,"E2536-15 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests" 2014,ASTM,"E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests" 2009,ASTM,"E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests" 2006,ASTM,"E2536-06 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests" 2009,ASTM,"E2532-09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices" 2006,ASTM,"E2532-06 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices" 2006,ASTM,"E2527-06 Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight" 2009,ASTM,"E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight (Redline)" 2009,ASTM,"E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight" 2006,ASTM,"E2518-06 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)" 2011,ASTM,"E2518-11 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)" 2013,ASTM,"E2517-13 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)" 2011,ASTM,"E2517-11 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)" 2006,ASTM,"E2517-06 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/ 2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/ 2 Ton LMTV Trailer)" 2006,ASTM,"E2516-06 Standard Classification for Cost Estimate Classification System" 2011,ASTM,"E2516-11 Standard Classification for Cost Estimate Classification System" 2007,ASTM,"E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel" 2010,ASTM,"E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel" 2011,ASTM,"E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel" 2009,ASTM,"E2515-09 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel" 2015,ASTM,"E2514-15 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses (Redline)" 2015,ASTM,"E2514-15 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses" 2008,ASTM,"E2514-08 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses" 2006,ASTM,"E2514-06 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses" 2012,ASTM,"E2513-07(2012) Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems" 2007,ASTM,"E2513-07 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems" 2009,ASTM,"E2511-09 Standard Guide for Detailing of EIFS-Clad Wall Assemblies" 2014,ASTM,"E251-92(2014) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages" 2009,ASTM,"E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages" 2003,ASTM,"E251-92(2003) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages" 1998,ASTM,"E251-92(1998) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages" 2015,ASTM,"E2506-15 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities (Redline)" 2015,ASTM,"E2506-15 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities" 2006,ASTM,"E2506-06e1 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities" 2011,ASTM,"E2506-11 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities" 2006,ASTM,"E2506-06 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities" 2014,ASTM,"E2505-07(2014) Standard Practice for Industrial Rope Access" 2007,ASTM,"E2505-07 Standard Practice for Industrial Rope Access" 2011,ASTM,"E2499-11 Standard Practice for Classification of Asset Physical Location Information" 2011,ASTM,"E2499-11 Standard Practice for Classification of Asset Physical Location Information (Redline)" 2006,ASTM,"E2499-06 Standard Practice for Classification of Equipment Physical Location Information" 2011,ASTM,"E2497-11 Standard Practice for Calculation of Asset Movement Velocity (AMV)" 2011,ASTM,"E2497-11 Standard Practice for Calculation of Asset Movement Velocity (AMV) (Redline)" 2006,ASTM,"E2497-06 Standard Practice for Calculation of Equipment Movement Velocity (EMV)" 2013,ASTM,"E2495-13 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition (Redline)" 2013,ASTM,"E2495-13 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition" 2007,ASTM,"E2495-07 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition" 2006,ASTM,"E2495-06 Standard Practice for Asset Utility" 2017,ASTM,"C728-17a Standard Specification for Perlite Thermal Insulation Board" 2007,ASTM,"E2492-07 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test" 2006,ASTM,"E2489-06 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs" 2006,ASTM,"E2489-06e1 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs" 2011,ASTM,"E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs" 2013,ASTM,"E2486/E2486M-13 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) (Redline)" 2013,ASTM,"E2486/E2486M-13 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)" 2006,ASTM,"E2486-06 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)" 2013,ASTM,"E2485/E2485M-13 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings (Redline)" 2013,ASTM,"E2485/E2485M-13 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings" 2006,ASTM,"E2485-06 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings" 2015,ASTM,"E2484-08(2015) Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices" 2006,ASTM,"E2484-06 Standard Specification for High-Rise Building External Evacuation Controlled Descent Devices" 2008,ASTM,"E2484-08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Redline)" 2008,ASTM,"E2484-08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices" 2012,ASTM,"E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems" 2005,ASTM,"E2468-05 Standard Practice for Metadata to Support Archived Data Management Systems" 2012,ASTM,"E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors" 2005,ASTM,"E2467-05 Standard Practice for Developing Axle Count Adjustment Factors" 2011,ASTM,"E2463-11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II (Redline)" 2011,ASTM,"E2463-11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II" 2005,ASTM,"E2463-05 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II" 2010,ASTM,"E2462-10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I (Redline)" 2010,ASTM,"E2462-10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I" 2005,ASTM,"E2462-05 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I" 2012,ASTM,"E2461-12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs" 2012,ASTM,"E2461-12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs (Redline)" 2011,ASTM,"E2461-05(2011) Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs" 2005,ASTM,"E2461-05 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs" 2011,ASTM,"E2459-05(2011) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans" 2005,ASTM,"E2459-05 Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans" 2013,ASTM,"E2453-13 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property (Redline)" 2013,ASTM,"E2453-13 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property" 2005,ASTM,"E2453-05 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property" 2012,ASTM,"E2452-12 Standard Practice for Equipment Management Process Maturity (EMPM) Model (Redline)" 2012,ASTM,"E2452-12 Standard Practice for Equipment Management Process Maturity (EMPM) Model" 2005,ASTM,"E2452-05e1 Standard Practice for Equipment Management Process Maturity (EMPM) Model" 2010,ASTM,"E2452-10 Standard Practice for Equipment Management Process Maturity (EMPM) Model" 2005,ASTM,"E2452-05 Standard Practice for Equipment Management Process Maturity (EMPM) Model" 2011,ASTM,"E2448-11e1 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials" 2005,ASTM,"E2448-05 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials" 2006,ASTM,"E2448-06 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials" 2011,ASTM,"E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials (Redline)" 2011,ASTM,"E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials" 2008,ASTM,"E2448-08 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials" 2005,ASTM,"E2432-05 Standard Guide for General Principles of Sustainability Relative to Buildings" 2011,ASTM,"E2432-11 Standard Guide for General Principles of Sustainability Relative to Buildings" 2012,ASTM,"E2431-12 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings" 2011,ASTM,"E2431-06(2011) Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings" 2006,ASTM,"E2431-06 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings" 2014,ASTM,"E2428-14 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines" 2015,ASTM,"E2428-15 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines" 2015,ASTM,"E2428-15a Standard Practice for Calibration and Verification of Torque Transducers" 2008,ASTM,"E2428-08 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines" 2013,ASTM,"E2427-13 Standard Test Method for Acceptance by Performance Testing for Sieves" 2011,ASTM,"E2427-11 Standard Test Method for Acceptance by Performance Testing for Sieves" 2005,ASTM,"E2427-05 Standard Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves" 2012,ASTM,"E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors" 2005,ASTM,"E2415-05 Standard Practice for Installing Piezoelectric Highway Traffic Sensors" 2014,ASTM,"E241-09(2014)e1 Standard Guide for Limiting Water-Induced Damage to Buildings" 2009,ASTM,"E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings (Redline)" 2009,ASTM,"E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings" 2000,ASTM,"E241-00e1 Standard Guide for Limiting Water-Induced Damage to Buildings" 2008,ASTM,"E241-08 Standard Guide for Limiting Water-Induced Damage to Buildings" 2004,ASTM,"E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings" 2000,ASTM,"E241-00 Standard Guide for Limiting Water-Induced Damage to Buildings" 2015,ASTM,"E2404-15a Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics" 2013,ASTM,"E2404-13 Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2015,ASTM,"E2404-15 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics" 2013,ASTM,"E2404-13e1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact" 2012,ASTM,"E2404-12 Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2010,ASTM,"E2404-10 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2007,ASTM,"E2404-07a Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2009,ASTM,"E2404-09 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2008,ASTM,"E2404-08 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2007,ASTM,"E2404-07 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2006,ASTM,"E2404-06 Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics" 2005,ASTM,"E2404-05 Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics" 2015,ASTM,"E2400/E2400M-06(2015)e1 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems" 2006,ASTM,"E2400-06 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems" 2015,ASTM,"E2399/E2399M-15 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems" 2011,ASTM,"E2399-11 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems" 2005,ASTM,"E2399-05 Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems" 2015,ASTM,"E2398/E2398M-15 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems" 2005,ASTM,"E2398-05 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems" 2011,ASTM,"E2398-11 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems" 2015,ASTM,"E2397/E2397M-15 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems" 2011,ASTM,"E2397-11 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems" 2005,ASTM,"E2397-05 Standard Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems" 2015,ASTM,"E2396/E2396M-15 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems" 2011,ASTM,"E2396-11 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems" 2005,ASTM,"E2396-05 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Green Roof Systems" 2013,ASTM,"E2395-06(2013) Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact" 2005,ASTM,"E2395-05 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact" 2006,ASTM,"E2395-06 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact." 2015,ASTM,"E2393-10a(2015) Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2010,ASTM,"E2393-10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2010,ASTM,"E2393-10 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2009,ASTM,"E2393-09 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2004,ASTM,"E2393-04 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers" 2015,ASTM,"E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter" 2012,ASTM,"E238-12 Standard Test Method for Pin-Type Bearing Test of Metallic Materials " 2008,ASTM,"E238-84(2008) Standard Test Method for Pin-Type Bearing Test of Metallic Materials" 2002,ASTM,"E238-84(2002) Standard Test Method for Pin-Type Bearing Test of Metallic Materials" 2013,ASTM,"E2378-13 Standard Practice for the Recognition of Impaired or Retired Personal Property" 2005,ASTM,"E2378-05 Standard Practice for the Recognition of Impaired or Retired Personal Property" 2010,ASTM,"E2377-10 Standard Specification for Shelter, Electrical Equipment, Lightweight" 2004,ASTM,"E2377-04 Standard Specification for Shelter, Electrical Equipment, Lightweight" 2013,ASTM,"E2359/E2359M-13 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly" 2006,ASTM,"E2359-06 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly" 2010,ASTM,"E2358-04(2010) Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades" 2004,ASTM,"E2358-04 Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades" 2011,ASTM,"E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies" 2005,ASTM,"E2357-05 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies" 2010,ASTM,"E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface" 2004,ASTM,"E2355-04 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface" 2010,ASTM,"E2354-10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units" 2004,ASTM,"E2354-04 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units" 2014,ASTM,"E2353-14 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades" 2006,ASTM,"E2353-06 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades" 2004,ASTM,"E2353-04 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades" 2004,ASTM,"E2351-04a Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality" 2004,ASTM,"E2351-04 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality" 2013,ASTM,"E2351-04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality" 2015,ASTM,"E2342/E2342M-10(2015)e1 Standard Test Method for Durability Testing of Duct Sealants" 2015,ASTM,"E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique" 2011,ASTM,"E2340/E2340M-11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique" 2014,ASTM,"E2336-14 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2013,ASTM,"E2336-04(2013) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2009,ASTM,"E2336-04(2009) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2004,ASTM,"E2336-04 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems" 2012,ASTM,"E2335-12 Standard Guide for Laboratory Monitors" 2008,ASTM,"E2335-08 Standard Guide for Laboratory Monitors" 2004,ASTM,"E2335-04 Standard Guide for Laboratory Monitors" 2013,ASTM,"E2334-09(2013)e1 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2013,ASTM,"E2334-09(2013) Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2003,ASTM,"E2334-03 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2003,ASTM,"E2334-03e1 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2008,ASTM,"E2334-08 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2009,ASTM,"E2334-09 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample" 2015,ASTM,"E2322-03(2015) Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction" 2009,ASTM,"E2322-03(2009) Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction" 2003,ASTM,"E2322-03 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction" 2011,ASTM,"E2321-03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)" 2003,ASTM,"E2321-03 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)" 2012,ASTM,"E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions" 2004,ASTM,"E2320-04 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions" 2011,ASTM,"E2319-04(2011) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2004,ASTM,"E2319-04 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen" 2016,ASTM,"E2309/E2309M-16 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines" 2015,ASTM,"E2307-15b Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus" 2015,ASTM,"E2307-15 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus" 2015,ASTM,"E2307-15a Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus" 2004,ASTM,"E2307-04e1 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus" 2010,ASTM,"E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus" 2004,ASTM,"E2307-04 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus" 2013,ASTM,"E2306-13 Standard Practice for Disposal of Personal Property" 2011,ASTM,"E2306-11 Standard Practice for Disposal of Personal Property" 2003,ASTM,"E2306-03 Standard Practice for Utilization and Disposal of Personal Property" 2009,ASTM,"E2300-09 Standard Specification for Highway Traffic Monitoring Devices" 2006,ASTM,"E2300-06 Standard Specification for Highway Traffic Monitoring Devices" 2012,ASTM,"E23-12a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials " 2012,ASTM,"E23-12b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials " 2012,ASTM,"E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials " 1996,ASTM,"E23-96 Standard Test Method for Notched Bar Impact Testing of Metallic Materials" 2004,ASTM,"E23-04 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2007,ASTM,"E23-07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2007,ASTM,"E23-07a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2007,ASTM,"E23-07 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2006,ASTM,"E23-06 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2005,ASTM,"E23-05 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2002,ASTM,"E23-02a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2002,ASTM,"E23-02 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2001,ASTM,"E23-01a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2001,ASTM,"E23-01 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2000,ASTM,"E23-00 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials" 2012,ASTM,"E23-12 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials " 2015,ASTM,"E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials (Redline)" 2015,ASTM,"E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials" 2013,ASTM,"E2298-13a Standard Test Method for Instrumented Impact Testing of Metallic Materials" 2013,ASTM,"E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials" 2009,ASTM,"E2298-09 Standard Test Method for Instrumented Impact Testing of Metallic Materials" 2014,ASTM,"E2282-14 Standard Guide for Defining the Test Result of a Test Method" 2013,ASTM,"E2282-13 Standard Guide for Defining the Test Result of a Test Method" 2003,ASTM,"E2282-03 Standard Guide for Defining the Test Result of a Test Method" 2009,ASTM,"E2282-09 Standard Guide for Defining the Test Result of a Test Method" 2015,ASTM,"E2281-15 Standard Practice for Process Capability and Performance Measurement" 2012,ASTM,"E2281-08a(2012)e1 Standard Practice for Process and Measurement Capability Indices" 2003,ASTM,"E2281-03 Standard Practice for Process and Measurement Capability Indices" 2003,ASTM,"E2281-03e1 Standard Practice for Process and Measurement Capability Indices" 2008,ASTM,"E2281-08 Standard Practice for Process and Measurement Capability Indices" 2008,ASTM,"E2281-08a Standard Practice for Process and Measurement Capability Indices" 2013,ASTM,"E2280-13 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities" 2003,ASTM,"E2280-03e1 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities" 2009,ASTM,"E2280-09 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities" 2003,ASTM,"E2280-03 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities" 2009,ASTM,"E2279-09 Standard Practice for Establishing the Guiding Principles of Property Management (Redline)" 2009,ASTM,"E2279-09 Standard Practice for Establishing the Guiding Principles of Property Management" 2003,ASTM,"E2279-03 Standard Practice for Establishing the Guiding Principles of Property Management" 2011,ASTM,"E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies" 2003,ASTM,"E2273-03 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies" 2012,ASTM,"E2271-05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities" 2005,ASTM,"E2271-05a Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities" 2005,ASTM,"E2271-05 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities" 2004,ASTM,"E2271-04 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities" 2003,ASTM,"E2271-03 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities" 2014,ASTM,"E2270-14 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions" 2014,ASTM,"E2270-14 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions (Redline)" 2013,ASTM,"E2270-13 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions" 2005,ASTM,"E2270-05 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions" 2003,ASTM,"E2270-03 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions" 2014,ASTM,"E2269-14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography (Redline)" 2014,ASTM,"E2269-14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography" 2005,ASTM,"E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography" 2003,ASTM,"E2269-03 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography" 2011,ASTM,"E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference" 2004,ASTM,"E2268-04 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference" 2013,ASTM,"E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality" 2004,ASTM,"E2267-04 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality" 2003,ASTM,"E2267-03 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality" 2011,ASTM,"E2266-11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion (Redline)" 2011,ASTM,"E2266-11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion" 2004,ASTM,"E2266-04 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion" 2018,ASTM,"C717-18 Standard Terminology of Building Seals and Sealants" 2009,ASTM,"E2265-09 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2008,ASTM,"E2265-08 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2007,ASTM,"E2265-07 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2006,ASTM,"E2265-06a Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2006,ASTM,"E2265-06 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2005,ASTM,"E2265-05a Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2005,ASTM,"E2265-05 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2004,ASTM,"E2265-04a Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2004,ASTM,"E2265-04 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2003,ASTM,"E2265-03 Standard Terminology for Anchors and Fasteners in Concrete and Masonry" 2013,ASTM,"E2264-05(2013) Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products" 2005,ASTM,"E2264-05 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products" 2012,ASTM,"E2260-03(2012)e1 Standard Guide for Repointing (Tuckpointing) Historic Masonry" 2012,ASTM,"E2260-03(2012) Standard Guide for Repointing (Tuckpointing) Historic Masonry" 2003,ASTM,"E2260-03 Standard Guide for Repointing (Tuckpointing) Historic Masonry" 2011,ASTM,"E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data" 2003,ASTM,"E2259-03a Standard Guide for Archiving and Retrieving ITS-Generated Data" 2013,ASTM,"E2257-13a Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies" 2013,ASTM,"E2257-13 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies" 2008,ASTM,"E2257-08 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies" 2003,ASTM,"E2257-03 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies" 2013,ASTM,"E2255/E2255M-13 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings (Redline)" 2013,ASTM,"E2255/E2255M-13 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings" 2012,ASTM,"E2252-12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities (Redline)" 2004,ASTM,"E2252-04 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities" 2003,ASTM,"E2252-03 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities" 2002,ASTM,"E2252-02 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities" 2012,ASTM,"E2252-12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities" 2008,ASTM,"E2249-02(2008) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity" 2002,ASTM,"E2249-02 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity" 2015,ASTM,"E2248-15 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens" 2012,ASTM,"E2248-12 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens" 2013,ASTM,"E2248-13 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens" 2009,ASTM,"E2248-09 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens" 2012,ASTM,"E2239-12 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities" 2004,ASTM,"E2239-04 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities" 2003,ASTM,"E2239-03 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities" 2002,ASTM,"E2239-02 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities" 2012,ASTM,"E2235-04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods" 2004,ASTM,"E2235-04e1 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods" 2003,ASTM,"E2235-03 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods" 2004,ASTM,"E2235-04 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods" 2013,ASTM,"E2234-09(2013) Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL" 2008,ASTM,"E2234-08 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL" 2009,ASTM,"E2234-09 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL" 2005,ASTM,"E2234-05 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL" 2014,ASTM,"E2231-14 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2015,ASTM,"E2231-15 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2002,ASTM,"E2231-02e1 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2009,ASTM,"E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2007,ASTM,"E2231-07a Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2007,ASTM,"E2231-07 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2002,ASTM,"E2231-02 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics" 2015,ASTM,"E2226-15b Standard Practice for Application of Hose Stream" 2015,ASTM,"E2226-15a Standard Practice for Application of Hose Stream" 2015,ASTM,"E2226-15 Standard Practice for Application of Hose Stream" 2012,ASTM,"E2226-12 Standard Practice for Application of Hose Stream" 2011,ASTM,"E2226-11 Standard Practice for Application of Hose Stream" 2010,ASTM,"E2226-10e1 Standard Practice for Application of Hose Stream" 2010,ASTM,"E2226-10 Standard Practice for Application of Hose Stream" 2008,ASTM,"E2226-08 Standard Practice for Application of Hose Stream" 2007,ASTM,"E2226-07 Standard Practice for Application of Hose Stream" 2002,ASTM,"E2226-02 Standard Practice for Application of Hose Stream" 2015,ASTM,"E2218-15 Standard Test Method for Determining Forming Limit Curves (Redline)" 2015,ASTM,"E2218-15 Standard Test Method for Determining Forming Limit Curves" 2014,ASTM,"E2218-14 Standard Test Method for Determining Forming Limit Curves" 2014,ASTM,"E2218-14e1 Standard Test Method for Determining Forming Limit Curves" 2002,ASTM,"E2218-02 Standard Test Method for Determining Forming Limit Curves" 2008,ASTM,"E2218-02(2008) Standard Test Method for Determining Forming Limit Curves" 2002,ASTM,"E2213-02e1 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications" 2010,ASTM,"E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications" 2003,ASTM,"E2213-03 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications" 2002,ASTM,"E2213-02 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications" 2015,ASTM,"E2204-15 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects (Redline)" 2015,ASTM,"E2204-15 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2011,ASTM,"E2204-11 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2011,ASTM,"E2204-11a Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2005,ASTM,"E2204-05e1 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2005,ASTM,"E2204-05 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2002,ASTM,"E2204-02 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects" 2014,ASTM,"E2203-14 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories (Redline)" 2014,ASTM,"E2203-14 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories" 2008,ASTM,"E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories" 2002,ASTM,"E2203-02 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories" 2009,ASTM,"E2202-02(2009) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards" 2002,ASTM,"E2202-02 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards" 2010,ASTM,"E2190-10 Standard Specification for Insulating Glass Unit Performance and Evaluation (Redline)" 2010,ASTM,"E2190-10 Standard Specification for Insulating Glass Unit Performance and Evaluation" 2008,ASTM,"E2190-08 Standard Specification for Insulating Glass Unit Performance and Evaluation" 2002,ASTM,"E2190-02 Standard Specification for Insulating Glass Unit Performance and Evaluation" 2010,ASTM,"E2189-10 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units" 2002,ASTM,"E2189-02 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units" 2010,ASTM,"E2189-10e1 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units" 2010,ASTM,"E2188-10 Standard Test Method for Insulating Glass Unit Performance (Redline)" 2010,ASTM,"E2188-10 Standard Test Method for Insulating Glass Unit Performance" 2002,ASTM,"E2188-02 Standard Test Method for Insulating Glass Unit Performance" 2009,ASTM,"E2187-09 Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2004,ASTM,"E2187-04 Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2002,ASTM,"E2187-02b Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2002,ASTM,"E2187-02a Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2002,ASTM,"E2187-02 Standard Test Method for Measuring the Ignition Strength of Cigarettes" 2003,ASTM,"E2179-03e1 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors" 2003,ASTM,"E2179-03e2 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors" 2009,ASTM,"E2179-03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors (Redline)" 2009,ASTM,"E2179-03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors" 2001,ASTM,"E2179-01 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors" 2013,ASTM,"E2178-13 Standard Test Method for Air Permeance of Building Materials (Redline)" 2013,ASTM,"E2178-13 Standard Test Method for Air Permeance of Building Materials" 2011,ASTM,"E2178-11 Standard Test Method for Air Permeance of Building Materials" 2003,ASTM,"E2178-03 Standard Test Method for Air Permeance of Building Materials" 2001,ASTM,"E2178-01 Standard Test Method for Air Permeance of Building Materials" 2014,ASTM,"E2174-14b Standard Practice for On-Site Inspection of Installed Firestops" 2014,ASTM,"E2174-14 Standard Practice for On-Site Inspection of Installed Firestops (Redline)" 2014,ASTM,"E2174-14 Standard Practice for On-Site Inspection of Installed Firestops" 2010,ASTM,"E2174-10a Standard Practice for On-Site Inspection of Installed Fire Stops" 2010,ASTM,"E2174-10ae1 Standard Practice for On-Site Inspection of Installed Fire Stops" 2010,ASTM,"E2174-10 Standard Practice for On-Site Inspection of Installed Fire Stops" 2009,ASTM,"E2174-09 Standard Practice for On-Site Inspection of Installed Fire Stops" 2004,ASTM,"E2174-04 Standard Practice for On-Site Inspection of Installed Fire Stops" 2001,ASTM,"E2174-01 Standard Practice for On-Site Inspection of Installed Fire Stops" 2011,ASTM,"E2173-07(2011) Standard Guide for Disclosure of Environmental Liabilities" 2007,ASTM,"E2173-07 Standard Guide for Disclosure of Environmental Liabilities" 2001,ASTM,"E2173-01 Standard Guide for Disclosure of Environmental Liabilities" 2010,ASTM,"E2168-10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating (Redline)" 2010,ASTM,"E2168-10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating" 2006,ASTM,"E2168-06 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating" 2001,ASTM,"E2168-01 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating" 2001,ASTM,"E2167-01 Standard Guide for Selection and Use of Stone Consolidants" 2012,ASTM,"E2166-12 Standard Practice for Organizing and Managing Building Data" 2007,ASTM,"E2166-07 Standard Practice for Organizing and Managing Building Data" 2001,ASTM,"E2166-01 Standard Practice for Organizing and Managing Building Data" 2015,ASTM,"E2157-15 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter" 2009,ASTM,"E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter" 2005,ASTM,"E2157-01(2005) Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter" 2001,ASTM,"E2157-01 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter" 2013,ASTM,"E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings" 2004,ASTM,"E2156-04 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings" 2001,ASTM,"E2156-01 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings" 2010,ASTM,"E2151-02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings" 2002,ASTM,"E2151-02 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings" 2001,ASTM,"E2151-01 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings" 2013,ASTM,"E2150-13 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure" 2009,ASTM,"E2150-09 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure" 2004,ASTM,"E2150-04 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure" 2002,ASTM,"E2150-02 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure" 2001,ASTM,"E2150-01 Standard Classification for Life-Cycle Environmental Work Elements-Environmental Cost Element Structure" 2014,ASTM,"E2141-14 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units" 2014,ASTM,"E2141-14 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units (Redline)" 2012,ASTM,"E2141-12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units" 2006,ASTM,"E2141-06 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units" 2002,ASTM,"E2141-02 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units" 2009,ASTM,"E2140-01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head" 2001,ASTM,"E2140-01 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head" 2013,ASTM,"E2136-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability" 2004,ASTM,"E2136-04 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability" 2001,ASTM,"E2136-01 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability" 2010,ASTM,"E2135-10ae1 Standard Terminology for Property and Asset Management" 2007,ASTM,"E2135-07e1 Standard Terminology for Property and Asset Management" 2010,ASTM,"E2135-10a Standard Terminology for Property and Asset Management (Redline)" 2010,ASTM,"E2135-10a Standard Terminology for Property and Asset Management" 2010,ASTM,"E2135-10 Standard Terminology for Property and Asset Management" 2007,ASTM,"E2135-07 Standard Terminology for Property and Asset Management" 2006,ASTM,"E2135-06 Standard Terminology for Property and Asset Management" 2004,ASTM,"E2135-04 Standard Terminology for Property and Asset Management" 2002,ASTM,"E2135-02 Standard Terminology for Property and Asset Management" 2001,ASTM,"E2135-01 Standard Terminology for Property and Asset Management" 2014,ASTM,"E2134/E2134M-14 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) (Redline)" 2014,ASTM,"E2134/E2134M-14 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)" 2013,ASTM,"E2133-03(2013) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface" 2009,ASTM,"E2133-03(2009) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface" 2003,ASTM,"E2133-03 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface" 2007,ASTM,"E2132-01(2007) Standard Practice for Physical Inventory of Durable, Moveable Property" 2001,ASTM,"E2132-01 Standard Practice for Physical Inventory of Durable, Moveable Property" 2011,ASTM,"E2132-11 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets" 2009,ASTM,"E2131-09 Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property" 2001,ASTM,"E2131-01 Standard Practice for Assessing Loss, Damage, or Destruction of Property" 2010,ASTM,"E2129-10 Standard Practice for Data Collection for Sustainability Assessment of Building Products (Redline)" 2010,ASTM,"E2129-10 Standard Practice for Data Collection for Sustainability Assessment of Building Products" 2005,ASTM,"E2129-05 Standard Practice for Data Collection for Sustainability Assessment of Building Products" 2003,ASTM,"E2129-03 Standard Practice for Data Collection for Sustainability Assessment of Building Products" 2001,ASTM,"E2129-01 Standard Practice for Data Collection for Sustainability Assessment of Building Products" 2012,ASTM,"E2128-12 Standard Guide for Evaluating Water Leakage of Building Walls" 2009,ASTM,"E2128-01a(2009) Standard Guide for Evaluating Water Leakage of Building Walls" 2001,ASTM,"E2128-01a Standard Guide for Evaluating Water Leakage of Building Walls" 2001,ASTM,"E2128-01 Standard Guide for Evaluating Water Leakage of Building Walls" 2017,ASTM,"C717-17a Standard Terminology of Building Seals and Sealants" 2015,ASTM,"E2127-01A(2015)e1 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction" 2007,ASTM,"E2127-01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction (Redline)" 2007,ASTM,"E2127-01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction" 2006,ASTM,"E2127-01a(2006) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction" 2001,ASTM,"E2127-01a Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction" 2001,ASTM,"E2127-01 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction" 2011,ASTM,"E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings (Redline)" 2010,ASTM,"E2126-10 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2011,ASTM,"E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2009,ASTM,"E2126-09 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2008,ASTM,"E2126-08 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2007,ASTM,"E2126-07a Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings" 2007,ASTM,"E2126-07 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings" 2005,ASTM,"E2126-05 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings" 2002,ASTM,"E2126-02a Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings" 2002,ASTM,"E2126-02 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings" 2013,ASTM,"E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings (Redline)" 2013,ASTM,"E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2012,ASTM,"E2121-12 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2011,ASTM,"E2121-11 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2009,ASTM,"E2121-09 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2008,ASTM,"E2121-08 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2003,ASTM,"E2121-03 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2002,ASTM,"E2121-02a Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2002,ASTM,"E2121-02 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings" 2010,ASTM,"E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films" 2015,ASTM,"E2115-15 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities" 2006,ASTM,"E2115-06 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities (Redline)" 2005,ASTM,"E2115-05a Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities" 2005,ASTM,"E2115-05 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children" 2000,ASTM,"E2115-00 Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children" 2008,ASTM,"E2114-08 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2006,ASTM,"E2114-06a Standard Terminology for Sustainability Relative to the Performance of Buildings" 2006,ASTM,"E2114-06 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2005,ASTM,"E2114-05a Standard Terminology for Sustainability Relative to the Performance of Buildings" 2005,ASTM,"E2114-05 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2004,ASTM,"E2114-04 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2001,ASTM,"E2114-01 Standard Terminology for Sustainability Relative to the Performance of Buildings" 2000,ASTM,"E2114-00a Standard Terminology for Sustainability Relative to the Performance of Buildings" 2016,ASTM,"E2112-07(2016) Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2007,ASTM,"E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights (Redline)" 2007,ASTM,"E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2001,ASTM,"E2112-01 Standard Practice for Installation of Exterior Windows, Doors and Skylights" 2009,ASTM,"E2110-09 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)" 2011,ASTM,"E2110-11 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)" 2009,ASTM,"E2110-09e1 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)" 2003,ASTM,"E2110-03 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)" 2000,ASTM,"E2110-00 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)" 2015,ASTM,"E2102-15 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2014,ASTM,"E2102-14 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2013,ASTM,"E2102-13 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2011,ASTM,"E2102-11 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2011,ASTM,"E2102-11a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2000,ASTM,"E2102-00 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2009,ASTM,"E2102-09 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2008,ASTM,"E2102-08 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2004,ASTM,"E2102-04a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2004,ASTM,"E2102-04 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater" 2015,ASTM,"E2101-15 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer (Redline)" 2015,ASTM,"E2101-15 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer" 2014,ASTM,"E2101-14 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer" 2000,ASTM,"E2101-00 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer" 2015,ASTM,"E2100-04(2015) Standard Practice for Calculating the International Runway Friction Index" 2010,ASTM,"E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index (Redline)" 2010,ASTM,"E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index" 2004,ASTM,"E2100-04 Standard Practice for Calculating the International Runway Friction Index" 2002,ASTM,"E2100-02 Standard Practice for Calculating the International Runway Friction Index" 2009,ASTM,"E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials (Redline)" 2003,ASTM,"E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 2005,ASTM,"E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 2003,ASTM,"E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 1998,ASTM,"E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 1998,ASTM,"E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 2009,ASTM,"E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials" 2014,ASTM,"E2099-00(2014)e1 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems" 2007,ASTM,"E2099-00(2007) Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems" 2000,ASTM,"E2099-00 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems" 2013,ASTM,"E2098/E2098M-13 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution (Redline)" 2013,ASTM,"E2098/E2098M-13 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution" 2006,ASTM,"E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution (Redline)" 2006,ASTM,"E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution" 2000,ASTM,"E2098-00 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution" 2012,ASTM,"E2093-12 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization (Redline)" 2000,ASTM,"E2093-00 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization" 2012,ASTM,"E2093-12 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization " 2005,ASTM,"E2093-05 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization" 2005,ASTM,"E209-00(2005) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates" 2010,ASTM,"E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates" 2000,ASTM,"E209-00 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates" 2010,ASTM,"E2083-05(2010) Standard Classification for Building Construction Field Requirements, and Office Overhead Profit" 2005,ASTM,"E2083-05 Standard Classification for Building Construction Field Requirements, and Office Overhead Profit" 2000,ASTM,"E2083-00 Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit" 2012,ASTM,"E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels" 2006,ASTM,"E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels" 2000,ASTM,"E208-95a(2000)e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels" 2000,ASTM,"E208-95a(2000) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels" 2008,ASTM,"E2068-00(2008) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors" 2000,ASTM,"E2068-00 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors" 2015,ASTM,"E2067-15 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests (Redline)" 2015,ASTM,"E2067-15 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2012,ASTM,"E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2008,ASTM,"E2067-08 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2003,ASTM,"E2067-03 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2002,ASTM,"E2067-02 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2000,ASTM,"E2067-00a Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests" 2012,ASTM,"E2061-12 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles (Redline)" 2012,ASTM,"E2061-12 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2001,ASTM,"E2061-01e1 Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2009,ASTM,"E2061-09 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2009,ASTM,"E2061-09a Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2006,ASTM,"E2061-06 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2003,ASTM,"E2061-03 Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2002,ASTM,"E2061-02a Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2002,ASTM,"E2061-02 Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2001,ASTM,"E2061-01 Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2000,ASTM,"E2061-00b Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2000,ASTM,"E2061-00a Guide for Fire Hazard Assessment of Rail Transportation Vehicles" 2013,ASTM,"E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) (Redline)" 2013,ASTM,"E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)" 2013,ASTM,"E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2002,ASTM,"E2058-02 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2003,ASTM,"E2058-03 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2002,ASTM,"E2058-02a Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2001,ASTM,"E2058-01 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2000,ASTM,"E2058-00 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2009,ASTM,"E2058-09 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2006,ASTM,"E2058-06 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)" 2015,ASTM,"E2047-10(2015) Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays" 1999,ASTM,"E2047-99 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays" 2005,ASTM,"E2047-05 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays" 2010,ASTM,"E2047-10 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays (Redline)" 2010,ASTM,"E2047-10 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays" 2012,ASTM,"E2034-99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces" 1999,ASTM,"E2034-99 Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces" 2003,ASTM,"E2034-99(2003) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces" 2007,ASTM,"E2034-99(2007) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces" 2013,ASTM,"E2032-09(2013) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119" 1999,ASTM,"E2032-99e1 Standard Guide for Extension of Data From Fire Endurance Tests" 2007,ASTM,"E2032-07a Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119" 2007,ASTM,"E2032-07 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119" 2009,ASTM,"E2032-09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119" 2008,ASTM,"E2032-08a Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119" 2008,ASTM,"E2032-08 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119" 2002,ASTM,"E2030-02 Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2004,ASTM,"E2030-04 Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2006,ASTM,"E2030-06 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2006,ASTM,"E2030-06a Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2007,ASTM,"E2030-07 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2008,ASTM,"E2030-08 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2009,ASTM,"E2030-09 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings" 2018,ASTM,"C702/C702M-18 Standard Practice for Reducing Samples of Aggregate to Testing Size" 1999,ASTM,"E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution" 2011,ASTM,"E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution (Redline)" 2011,ASTM,"E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution" 2004,ASTM,"E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution" 1999,ASTM,"E2027-99 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials" 2005,ASTM,"E2027-05 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials" 2017,ASTM,"C685/C685M-17 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing" 2009,ASTM,"E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials" 1999,ASTM,"E2026-99 Standard Guide for the Estimation of Building Damageability in Earthquakes" 2007,ASTM,"E2026-07 Standard Guide for Seismic Risk Assessment of Buildings" 2015,ASTM,"E2016-15 Standard Specification for Industrial Woven Wire Cloth (Redline)" 2015,ASTM,"E2016-15 Standard Specification for Industrial Woven Wire Cloth" 2011,ASTM,"E2016-11 Standard Specification for Industrial Woven Wire Cloth" 2004,ASTM,"E2016-99(2004)e1 Standard Specification for Industrial Woven Wire Cloth" 1999,ASTM,"E2016-99e1 Standard Specification for Industrial Woven Wire Cloth" 1999,ASTM,"E2016-99 Standard Specification for Industrial Woven Wire Cloth" 2006,ASTM,"E2016-06 Standard Specification for Industrial Woven Wire Cloth" 2012,ASTM,"E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study" 2012,ASTM,"E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study (Redline)" 1999,ASTM,"E2013-99 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study" 2006,ASTM,"E2013-06 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study" 2010,ASTM,"E2004-10 Standard Test Method for Facing Cleavage of Sandwich Panels" 1999,ASTM,"E2004-99 Standard Test Method for Facing Cleavage of Sandwich Panels" 2004,ASTM,"E2004-04 Standard Test Method for Facing Cleavage of Sandwich Panels" 2011,ASTM,"E1998-11 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances" 1999,ASTM,"E1998-99 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances" 2007,ASTM,"E1998-02(2007) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances" 2002,ASTM,"E1998-02 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances" 2014,ASTM,"C685/C685M-14 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing" 2014,ASTM,"E1996-14a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2014,ASTM,"E1996-14 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2012,ASTM,"E1996-12 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2012,ASTM,"E1996-12a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2008,ASTM,"E1996-08e2 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2008,ASTM,"E1996-08e1 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2009,ASTM,"E1996-09 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2008,ASTM,"E1996-08 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2006,ASTM,"E1996-06 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2005,ASTM,"E1996-05b Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2005,ASTM,"E1996-05a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2005,ASTM,"E1996-05 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2004,ASTM,"E1996-04 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" 2003,ASTM,"E1996-03 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes" 2002,ASTM,"E1996-02 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes" 2001,ASTM,"E1996-01 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes" 2012,ASTM,"E1995-12 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 1998,ASTM,"E1995-98 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 2008,ASTM,"E1995-08 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 2004,ASTM,"E1995-04a Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 2004,ASTM,"E1995-04 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally" 1998,ASTM,"E1994-98 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans" 2003,ASTM,"E1994-98(2003) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans" 2008,ASTM,"E1994-08 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans" 2009,ASTM,"E1994-09 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans" 2013,ASTM,"E1994-09(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans" 2002,ASTM,"E1993-98(2002)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs" 2013,ASTM,"E1993/E1993M-98(2013)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs" 2008,ASTM,"E1993-98(2008) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs" 2002,ASTM,"E1993-98(2002) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs" 1998,ASTM,"E1993-98 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs" 1998,ASTM,"E1991-98 Standard Guide for Environmental Life Cycle Assessment of Building Materials/Products" 1998,ASTM,"E1980-98e1 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces" 2011,ASTM,"E1980-11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces" 2012,ASTM,"E1979-12 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead" 1998,ASTM,"E1979-98 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead" 2004,ASTM,"E1979-04 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead" 2001,ASTM,"E1978-01e1 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2011,ASTM,"E1978-11 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 1998,ASTM,"E1978-98 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2005,ASTM,"E1978-05 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2004,ASTM,"E1978-04 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2001,ASTM,"E1978-01 Standard Specification for Shelter, Tactical, Expandable, Two-Side" 2001,ASTM,"E1977-01e1 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2011,ASTM,"E1977-11 Standard Specification for Shelter, Tactical, Expandable, One-Side" 1998,ASTM,"E1977-98 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2005,ASTM,"E1977-05 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2004,ASTM,"E1977-04 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2001,ASTM,"E1977-01 Standard Specification for Shelter, Tactical, Expandable, One-Side" 2001,ASTM,"E1976-01e1 Standard Specification for Shelter, Tactical, Nonexpandable" 2011,ASTM,"E1976-11 Standard Specification for Shelter, Tactical, Nonexpandable" 1998,ASTM,"E1976-98 Standard Specification for Shelter, Tactical, Nonexpandable" 2005,ASTM,"E1976-05 Standard Specification for Shelter, Tactical, Nonexpandable" 2004,ASTM,"E1976-04 Standard Specification for Shelter, Tactical, Nonexpandable" 2001,ASTM,"E1976-01 Standard Specification for Shelter, Tactical, Nonexpandable" 2015,ASTM,"E1975-15 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2001,ASTM,"E1975-01e1 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2009,ASTM,"E1975-09 Standard Specification for Shelter, Electrical, Equipment S-280/G" 1998,ASTM,"E1975-98 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2006,ASTM,"E1975-06 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2001,ASTM,"E1975-01a Standard Specification for Shelter, Electrical, Equipment S-280/G" 2001,ASTM,"E1975-01 Standard Specification for Shelter, Electrical, Equipment S-280/G" 2011,ASTM,"E1974-11 Standard Specification for Shelter, Electrical Equipment S-250/G" 1998,ASTM,"E1974-98 Standard Specification for Shelter, Electrical, Equipment S-250/G" 2006,ASTM,"E1974-06 Standard Specification for Shelter, Electrical Equipment S-250/G" 2001,ASTM,"E1974-01a Standard Specification for Shelter, Electrical, Equipment S-250/G" 2001,ASTM,"E1974-01 Standard Specification for Shelter, Electrical, Equipment S-250/G" 2011,ASTM,"E1971-05(2011) Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings" 1998,ASTM,"E1971-98 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings" 2005,ASTM,"E1971-05 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings" 2015,ASTM,"E1966-15 Standard Test Method for Fire-Resistive Joint Systems (Redline)" 2015,ASTM,"E1966-15 Standard Test Method for Fire-Resistive Joint Systems" 2011,ASTM,"E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems" 2007,ASTM,"E1966-07 Standard Test Method for Fire-Resistive Joint Systems" 2001,ASTM,"E1966-01 Standard Test Method for Fire-Resistive Joint Systems" 2000,ASTM,"E1966-00 Standard Test Method for Fire-Resistive Joint Systems" 2015,ASTM,"E1960-07(2015) Standard Practice for Calculating International Friction Index of a Pavement Surface" 2011,ASTM,"E1960-07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface" 1998,ASTM,"E1960-98 Standard Practice for Calculating International Friction Index of a Pavement Surface" 2007,ASTM,"E1960-07 Standard Practice for Calculating International Friction Index of a Pavement Surface" 2003,ASTM,"E1960-03 Standard Practice for Calculating International Friction Index of a Pavement Surface" 2012,ASTM,"E196-06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs" 2000,ASTM,"E196-95(2000)e1 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs" 2006,ASTM,"E196-06 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs" 2010,ASTM,"E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers" 1998,ASTM,"E1957-98 Standard Practice for Using Pneumatic Tubing for Roadway Traffic Counters and Classifiers" 2004,ASTM,"E1957-04 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers" 1998,ASTM,"E1950-98 Standard Practice for Reporting Results from Methods of Chemical Analysis" 2010,ASTM,"E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis" 2003,ASTM,"E1950-98(2003) Standard Practice for Reporting Results from Methods of Chemical Analysis" 2014,ASTM,"E1949-03(2014)e1 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2014,ASTM,"E1949-03(2014) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2002,ASTM,"E1949-02 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2003,ASTM,"E1949-03 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2009,ASTM,"E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages" 2012,ASTM,"E1946-12 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects" 1998,ASTM,"E1946-98 Standard Practice for Measuring Cost Risk of Buildings and Building Systems" 2007,ASTM,"E1946-07 Standard Practice for Measuring Cost Risk of Buildings and Building Systems" 2002,ASTM,"E1946-02 Standard Practice for Measuring Cost Risk of Buildings and Building Systems" 2013,ASTM,"E1928-13 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing" 1999,ASTM,"E1928-99 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing" 2007,ASTM,"E1928-07 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing" 2012,ASTM,"E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings" 2007,ASTM,"E1927-98(2007) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings" 2003,ASTM,"E1927-98(2003) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings" 1998,ASTM,"E1927-98 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings" 2015,ASTM,"E1926-08(2015) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements" 2003,ASTM,"E1926-98(2003) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements" 1998,ASTM,"E1926-98 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements" 2008,ASTM,"E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements" 2010,ASTM,"E1925-10 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures" 1999,ASTM,"E1925-99 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures" 2004,ASTM,"E1925-04 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures" 2001,ASTM,"E1925-01 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures" 2015,ASTM,"E1918-06(2015) Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field" 2006,ASTM,"E1918-06 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field" 1998,ASTM,"E1914-98 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis" 2003,ASTM,"E1914-98(2003) Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis" 2017,ASTM,"C667-17 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air" 2009,ASTM,"E1911-09a Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester" 2002,ASTM,"E1911-98(2002) Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester" 1998,ASTM,"E1911-98 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester" 2009,ASTM,"E1911-09 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester" 2007,ASTM,"E1911-07 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester" 2010,ASTM,"E1908-10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)" 1997,ASTM,"E1908-97 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)" 2003,ASTM,"E1908-03 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)" 2011,ASTM,"E1903-11 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process" 2002,ASTM,"E1903-97(2002) Standard Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process" 1997,ASTM,"E1903-97 Standard Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process" 2014,ASTM,"E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds" 2008,ASTM,"E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds" 2003,ASTM,"E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds" 1997,ASTM,"E190-92(1997) Standard Test Method for Guided Bend Test for Ductility of Welds" 2015,ASTM,"E1890-11(2015) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment" 2011,ASTM,"E1890-11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment" 1997,ASTM,"E1890-97 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment" 2006,ASTM,"E1890-01(2006) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment" 2001,ASTM,"E1890-01 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment" 2015,ASTM,"E1889-97(2015) Standard Guide for Pavement Management Implementation" 2009,ASTM,"E1889-97(2009) Standard Guide for Pavement Management Implementation" 2002,ASTM,"E1889-97(2002) Standard Guide for Pavement Management Implementation" 1997,ASTM,"E1889-97 Standard Guide for Pavement Management Implementation" 2013,ASTM,"E1886-13a Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2013,ASTM,"E1886-13 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 1997,ASTM,"E1886-97 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2005,ASTM,"E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2004,ASTM,"E1886-04a Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2004,ASTM,"E1886-04 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 2002,ASTM,"E1886-02 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" 1999,ASTM,"E1876-99 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2000,ASTM,"E1876-00 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2001,ASTM,"E1876-01 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2006,ASTM,"E1876-01(2006) Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2007,ASTM,"E1876-07 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2009,ASTM,"E1876-09 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration" 2013,ASTM,"E1875-13 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance" 2000,ASTM,"E1875-00 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance" 2000,ASTM,"E1875-00e1 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance" 2008,ASTM,"E1875-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance" 2015,ASTM,"E186-15 Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings" 2010,ASTM,"E186-10 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings" 2004,ASTM,"E186-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (2 to 4 ½ in. [51 to 114-mm]) Steel Castings" 1998,ASTM,"E186-98 Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings" 2015,ASTM,"E1859/E1859M-11(2015) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique" 2011,ASTM,"E1859/E1859M-11e1 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique" 2013,ASTM,"E1857-97(2013)e1 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces" 2004,ASTM,"E1857-97(2004) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces" 1997,ASTM,"E1857-97 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces" 2013,ASTM,"E1856-13 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines" 2002,ASTM,"E1856-97(2002) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines" 1997,ASTM,"E1856-97e1 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines" 2008,ASTM,"E1856-97(2008) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines" 2015,ASTM,"E1851-15 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures" 2009,ASTM,"E1851-09 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures" 2004,ASTM,"E1851-04 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures" 2002,ASTM,"E1851-02 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures" 2015,ASTM,"E1845-15 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth" 2005,ASTM,"E1845-01(2005)e1 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth" 2009,ASTM,"E1845-09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth" 1996,ASTM,"E1845-96 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth" 2001,ASTM,"E1845-01 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth" 2015,ASTM,"E1844-08(2015) Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire" 2006,ASTM,"E1844-06 Standard Specification for A Size 10 4-5 Smooth-Tread Friction Test Tire" 2004,ASTM,"E1844-96(2004) Standard Specification for A Size 10 x 4-5 Smooth-Tread Friction Test Tire" 1996,ASTM,"E1844-96 Standard Specification for A Size 10 x 4-5 Smooth-Tread Friction Test Tire" 2008,ASTM,"E1844-08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire" 2001,ASTM,"E1830-01 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules" 2004,ASTM,"E1830-04 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules" 2009,ASTM,"E1830-09 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules" 2011,ASTM,"E1827-11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 2007,ASTM,"E1827-96(2007) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 2002,ASTM,"E1827-96(2002) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 1996,ASTM,"E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door" 2011,ASTM,"E1826-11 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded" 2012,ASTM,"E1826-12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded" 2005,ASTM,"E1826-05 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded" 2000,ASTM,"E1826-00 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded" 2012,ASTM,"E1825-06(2012) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems " 2017,ASTM,"C665-17 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing" 2003,ASTM,"E1825-96(2003) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems" 1996,ASTM,"E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems" 2006,ASTM,"E1825-06 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems" 2013,ASTM,"E1822-13 Standard Test Method for Fire Testing of Stacked Chairs" 2012,ASTM,"E1822-12 Standard Test Method for Fire Testing of Stacked Chairs" 2002,ASTM,"E1822-02a Standard Test Method for Fire Testing of Stacked Chairs" 2002,ASTM,"E1822-02b Standard Test Method for Fire Testing of Stacked Chairs" 2002,ASTM,"E1822-02 Standard Test Method for Fire Testing of Stacked Chairs" 2009,ASTM,"E1822-09 Standard Test Method for Fire Testing of Stacked Chairs" 2007,ASTM,"E1822-07 Standard Test Method for Fire Testing of Stacked Chairs" 2015,ASTM,"E1821-08(2015) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography" 1996,ASTM,"E1821-96 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography" 2007,ASTM,"E1821-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography" 2001,ASTM,"E1821-01 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography" 2008,ASTM,"E1821-08 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography" 2002,ASTM,"E1804-02 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project" 2012,ASTM,"E1804-12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project " 2007,ASTM,"E1804-07 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project" 2014,ASTM,"E1803-14 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels" 1999,ASTM,"E1803-99 Standard Test Methods for Determining Structural Capacities of Insulated Panels" 2006,ASTM,"E1803-06 Standard Test Methods for Determining Structural Capacities of Insulated Panels" 2012,ASTM,"E1802-12 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules" 1996,ASTM,"E1802-96 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules" 2001,ASTM,"E1802-01 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules" 2007,ASTM,"E1802-07 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules" 2000,ASTM,"E1801-00 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters" 2009,ASTM,"E1801-09 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters" 2003,ASTM,"E1801-03 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters" 2013,ASTM,"E1800-13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels" 2000,ASTM,"E1800-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels" 2008,ASTM,"E1800-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels" 2003,ASTM,"E1800-03 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels" 2014,ASTM,"E18-14a Standard Test Methods for Rockwell Hardness of Metallic Materials" 2014,ASTM,"E18-14 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2015,ASTM,"E18-15 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2012,ASTM,"E18-12 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2011,ASTM,"E18-11 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2008,ASTM,"E18-08b Standard Test Methods for Rockwell Hardness of Metallic Materials " 2008,ASTM,"E18-08a Standard Test Methods for Rockwell Hardness of Metallic Materials " 2007,ASTM,"E18-07 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2005,ASTM,"E18-05e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2005,ASTM,"E18-05 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2003,ASTM,"E18-03e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2003,ASTM,"E18-03 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2002,ASTM,"E18-02 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2000,ASTM,"E18-00 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials" 2008,ASTM,"E18-08 Standard Test Methods for Rockwell Hardness of Metallic Materials" 2012,ASTM,"E1799-12 Standard Practice for Visual Inspections of Photovoltaic Modules" 1996,ASTM,"E1799-96 Standard Practice for Visual Inspections of Photovoltaic Modules" 2002,ASTM,"E1799-02 Standard Practice for Visual Inspections of Photovoltaic Modules" 2008,ASTM,"E1799-08 Standard Practice for Visual Inspections of Photovoltaic Modules" 2012,ASTM,"E1797-12 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings " 2000,ASTM,"E1797-00 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2003,ASTM,"E1797-03 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2004,ASTM,"E1797-04 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 1997,ASTM,"E1796-97 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2011,ASTM,"E1796-03(2011)e1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2003,ASTM,"E1796-03 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2012,ASTM,"E1795-12 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings " 2000,ASTM,"E1795-00 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2004,ASTM,"E1795-04 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings" 2013,ASTM,"E1794-13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels" 2000,ASTM,"E1794-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200oF Elevated Humidity Service), Type II Panels" 2008,ASTM,"E1794-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels" 2003,ASTM,"E1794-03 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels" 2011,ASTM,"E1793-11 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters " 2000,ASTM,"E1793-00 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters" 2005,ASTM,"E1793-05 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters" 2011,ASTM,"E1792-03(2011) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2002,ASTM,"E1792-02 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2001,ASTM,"E1792-01e1 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 1996,ASTM,"E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2001,ASTM,"E1792-01 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2003,ASTM,"E1792-03 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust" 2013,ASTM,"E1783/E1783M-96(2013)e1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures" 2000,ASTM,"E1783-96(2000) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures" 2009,ASTM,"E1783-96(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures" 2005,ASTM,"E1783-96(2005) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures" 2012,ASTM,"E1780-12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source " 1996,ASTM,"E1780-96 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source" 2004,ASTM,"E1780-04 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source" 2008,ASTM,"E178-08 Standard Practice for Dealing With Outlying Observations" 2002,ASTM,"E178-02 Standard Practice for Dealing With Outlying Observations" 1994,ASTM,"E178-94 Standard Practice for Dealing With Outlying Observations" 2015,ASTM,"E1778-98a(2015) Standard Terminology Relating to Pavement Distress" 2008,ASTM,"E1778-98a(2008) Standard Terminology Relating to Pavement Distress" 2002,ASTM,"E1778-98a(2002) Standard Terminology Relating to Pavement Distress" 1998,ASTM,"E1778-98a Standard Terminology Relating to Pavement Distress" 2015,ASTM,"E1777-09(2015) Standard Guide for Prioritization of Data Needs for Pavement Management" 2009,ASTM,"E1777-09 Standard Guide for Prioritization of Data Needs for Pavement Management" 2002,ASTM,"E1777-96(2002) Standard Guide for Prioritization of Data Needs for Pavement Management" 1996,ASTM,"E1777-96 Standard Guide for Prioritization of Data Needs for Pavement Management" 2013,ASTM,"E1776-13 Standard Guide for Development of Fire-Risk-Assessment Standards" 2001,ASTM,"E1776-01e1 Standard Guide for Development of Fire-Risk-Assessment Standards" 1996,ASTM,"E1776-96 Standard Guide for Development of Fire-Risk-Assessment Standards" 2007,ASTM,"E1776-07 Standard Guide for Development of Fire-Risk-Assessment Standards" 2001,ASTM,"E1776-01 Standard Guide for Development of Fire-Risk-Assessment Standards" 2016,ASTM,"E1775-07(2016) Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead" 1996,ASTM,"E1775-96 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead" 2007,ASTM,"E1775-07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead" 2001,ASTM,"E1775-01 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead" 2010,ASTM,"E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants" 2005,ASTM,"E1773-05 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants" 2000,ASTM,"E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants" 2013,ASTM,"E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2008,ASTM,"E177-08 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2010,ASTM,"E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2006,ASTM,"E177-06b Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2006,ASTM,"E177-06a Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2006,ASTM,"E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2004,ASTM,"E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2004,ASTM,"E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2002,ASTM,"E177-90a(2002) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 1996,ASTM,"E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods" 2007,ASTM,"E1765-07e1 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems" 2011,ASTM,"E1765-11 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems" 1998,ASTM,"E1765-98 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems" 2007,ASTM,"E1765-07 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems" 2002,ASTM,"E1765-02 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems" 1998,ASTM,"E1763-98 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods" 2003,ASTM,"E1763-98(2003) Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods" 2015,ASTM,"E176-15ae1 Standard Terminology of Fire Standards" 2015,ASTM,"E176-15a Standard Terminology of Fire Standards (Redline)" 2015,ASTM,"E176-15a Standard Terminology of Fire Standards" 2015,ASTM,"E176-15 Standard Terminology of Fire Standards" 2014,ASTM,"E176-14c Standard Terminology of Fire Standards" 2014,ASTM,"E176-14a Standard Terminology of Fire Standards" 2014,ASTM,"E176-14b Standard Terminology of Fire Standards" 2014,ASTM,"E176-14 Standard Terminology of Fire Standards" 2013,ASTM,"E176-13 Standard Terminology of Fire Standards" 2012,ASTM,"E176-12a Standard Terminology of Fire Standards" 2012,ASTM,"E176-12 Standard Terminology of Fire Standards" 2012,ASTM,"E176-12b Standard Terminology of Fire Standards" 2010,ASTM,"E176-10a Standard Terminology of Fire Standards" 2010,ASTM,"E176-10 Standard Terminology of Fire Standards" 2009,ASTM,"E176-09a Standard Terminology of Fire Standards" 2009,ASTM,"E176-09 Standard Terminology of Fire Standards" 2010,ASTM,"E176-10ae1 Standard Terminology of Fire Standards" 2004,ASTM,"E176-04ae1 Standard Terminology of Fire Standards" 2002,ASTM,"E176-02e1 Standard Terminology of Fire Standards" 2002,ASTM,"E176-02 Standard Terminology of Fire Standards" 2001,ASTM,"E176-01a Standard Terminology of Fire Standards" 2001,ASTM,"E176-01 Standard Terminology of Fire Standards" 1999,ASTM,"E176-99a Standard Terminology of Fire Standards" 2008,ASTM,"E176-08a Standard Terminology of Fire Standards" 2008,ASTM,"E176-08 Standard Terminology of Fire Standards" 2007,ASTM,"E176-07a Standard Terminology of Fire Standards" 2007,ASTM,"E176-07 Standard Terminology of Fire Standards" 2006,ASTM,"E176-06 Standard Terminology of Fire Standards" 2005,ASTM,"E176-05a Standard Terminology of Fire Standards" 2005,ASTM,"E176-05 Standard Terminology of Fire Standards" 2004,ASTM,"E176-04a Standard Terminology of Fire Standards" 2004,ASTM,"E176-04 Standard Terminology of Fire Standards" 2015,ASTM,"E1758-01(2015) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography" 1995,ASTM,"E1758-95e1 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography" 2007,ASTM,"E1758-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography" 2001,ASTM,"E1758-01 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography" 2015,ASTM,"E1755-01(2015) Standard Test Method for Ash in Biomass" 1995,ASTM,"E1755-95 Standard Test Method for Ash in Biomass" 2007,ASTM,"E1755-01(2007) Standard Test Method for Ash in Biomass" 2001,ASTM,"E1755-01 Standard Test Method for Ash in Biomass" 2013,ASTM,"E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 1995,ASTM,"E1753-95 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2004,ASTM,"E1753-04 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2001,ASTM,"E1753-01 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films" 2010,ASTM,"E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters" 2005,ASTM,"E1749-05 Standard Terminology Relating to Rigid Wall Relocatable Shelters" 2000,ASTM,"E1749-00 Standard Terminology Relating to Rigid Wall Relocatable Shelters" 2009,ASTM,"E1748-95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System" 2001,ASTM,"E1748-95(2001) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System" 1995,ASTM,"E1748-95 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System" 2011,ASTM,"E1745-11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs" 2009,ASTM,"E1745-09 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs" 2004,ASTM,"E1745-97(2004) Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs" 1997,ASTM,"E1745-97 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs" 2015,ASTM,"E1740-15 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter" 2015,ASTM,"E1740-15 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter (Redline)" 2009,ASTM,"E1740-09 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 2010,ASTM,"E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter" 2007,ASTM,"E1740-07a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 2007,ASTM,"E1740-07 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 2002,ASTM,"E1740-02 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 2000,ASTM,"E1740-00 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter" 2015,ASTM,"E1730-15 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores" 2009,ASTM,"E1730-09 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores" 1999,ASTM,"E1730-99 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores" 2004,ASTM,"E1730-04 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores" 2002,ASTM,"E1730-02 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores" 2016,ASTM,"E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination (Redline)" 2016,ASTM,"E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination" 2010,ASTM,"E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination" 2003,ASTM,"E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination" 2002,ASTM,"E1728-02 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination" 2009,ASTM,"E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis" 1995,ASTM,"E1726-95 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis" 2001,ASTM,"E1726-01 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis" 2014,ASTM,"E1725-14 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 2001,ASTM,"E1725-95(2001)e1 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 2001,ASTM,"E1725-95(2001) Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 1995,ASTM,"E1725-95 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 2008,ASTM,"E1725-08 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 2007,ASTM,"E1725-07 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components" 2015,ASTM,"E1721-01(2015) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass" 2009,ASTM,"E1721-01(2009) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass" 1995,ASTM,"E1721-95 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass" 2001,ASTM,"E1721-01 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass" 2010,ASTM,"E1704-95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures" 2002,ASTM,"E1704-95(2002) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures" 1995,ASTM,"E1704-95 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures" 2015,ASTM,"E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge" 2012,ASTM,"E1701-95(2012) Standard Classification for Serviceability of an Office Facility for Manageability " 2005,ASTM,"E1701-95(2005) Standard Classification for Serviceability of an Office Facility for Manageability" 1999,ASTM,"E1701-95(1999) Standard Classification for Serviceability of an Office Facility for Manageability" 2013,ASTM,"E1700-13 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope" 2005,ASTM,"E1700-95(2005) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope" 1999,ASTM,"E1700-95(1999) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope 1,2" 2014,ASTM,"E1699-14 Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes" 2013,ASTM,"E1699-13 Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes" 2010,ASTM,"E1699-10 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects " 2005,ASTM,"E1699-00(2005) Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems" 2000,ASTM,"E1699-00 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems" 2012,ASTM,"E1694-95a(2012) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies " 2005,ASTM,"E1694-95a(2005) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies" 1999,ASTM,"E1694-95a(1999) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies" 2012,ASTM,"E1693-95(2012) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets " 2005,ASTM,"E1693-95(2005) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets" 1999,ASTM,"E1693-95(1999) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets" 2012,ASTM,"E1692-95a(2012) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants" 2005,ASTM,"E1692-95a(2005) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants" 1999,ASTM,"E1692-95a(1999) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants" 1995,ASTM,"E1690-95 Standard Test Method for Determination of Ethanol Extractives in Biomass" 2008,ASTM,"E1690-08 Standard Test Method for Determination of Ethanol Extractives in Biomass" 2001,ASTM,"E1690-01 Standard Test Method for Determination of Ethanol Extractives in Biomass" 2010,ASTM,"E1686-10e1 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria" 2010,ASTM,"E1686-10 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria" 1996,ASTM,"E1686-96 Standard Guide for Selection of Environmental Noise Measurements and Criteria" 2003,ASTM,"E1686-03 Standard Guide for Selection of Environmental Noise Measurements and Criteria" 2002,ASTM,"E1686-02 Standard Guide for Selection of Environmental Noise Measurements and Criteria" 2013,ASTM,"E1685-13 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique" 2000,ASTM,"E1685-00 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique" 2006,ASTM,"E1685-00(2006) Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique" 2011,ASTM,"E1680-11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems" 2003,ASTM,"E1680-95(2003) Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems" 1995,ASTM,"E1680-95 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems" 2013,ASTM,"E1679-13 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed" 2005,ASTM,"E1679-95(2005) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility" 2012,ASTM,"E1679-95(2012) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility " 1999,ASTM,"E1679-95(1999) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility" 2015,ASTM,"E1678-15 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis (Redline)" 2015,ASTM,"E1678-15 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2010,ASTM,"E1678-10 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 1997,ASTM,"E1678-97 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2009,ASTM,"E1678-09 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2008,ASTM,"E1678-08b Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2008,ASTM,"E1678-08a Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2008,ASTM,"E1678-08 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2007,ASTM,"E1678-07 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2002,ASTM,"E1678-02 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis" 2011,ASTM,"E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls" 2000,ASTM,"E1677-95(2000) Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls" 2005,ASTM,"E1677-05 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls" 2012,ASTM,"E1671-95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness " 2005,ASTM,"E1671-95a(2005) Standard Classification for Serviceability of an Office Facility for Cleanliness" 1999,ASTM,"E1671-95a(1999) Standard Classification for Serviceability of an Office Facility for Cleanliness" 2012,ASTM,"E1670-95a(2012) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance " 2005,ASTM,"E1670-95a(2005) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance" 1999,ASTM,"E1670-95a(1999) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance" 2012,ASTM,"E1669-95a(2012) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding " 1999,ASTM,"E1669-95a(1999) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding" 2005,ASTM,"E1669-95a(2005) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding" 2005,ASTM,"E1668-95a(2005) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff" 2012,ASTM,"E1668-95a(2012) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff " 1999,ASTM,"E1668-95a(1999) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff" 2005,ASTM,"E1667-95a(2005) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants" 2012,ASTM,"E1667-95a(2012) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants " 1999,ASTM,"E1667-95a(1999) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants" 2012,ASTM,"E1666-95a(2012) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions " 2005,ASTM,"E1666-95a(2005) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions" 1999,ASTM,"E1666-95a(1999) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions" 2012,ASTM,"E1665-95a(2012) Standard Classification for Serviceability of an Office Facility for Facility Protection " 2005,ASTM,"E1665-95a(2005) Standard Classification for Serviceability of an Office Facility for Facility Protection" 1999,ASTM,"E1665-95a(1999) Standard Classification for Serviceability of an Office Facility for Facility Protection" 2005,ASTM,"E1664-95a(2005) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors" 2012,ASTM,"E1664-95a(2012) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors " 1999,ASTM,"E1664-95a(1999) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors" 2001,ASTM,"E1663-01 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology" 2010,ASTM,"E1663-03(2010) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology" 1999,ASTM,"E1663-95a(1999) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology" 2003,ASTM,"E1663-03 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology" 2012,ASTM,"E1662-95a(2012) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment " 2005,ASTM,"E1662-95a(2005) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment" 1999,ASTM,"E1662-95a(1999) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment" 2012,ASTM,"E1661-95a(2012) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness" 2005,ASTM,"E1661-95a(2005) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness" 1999,ASTM,"E1661-95a(1999) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness" 2012,ASTM,"E1660-95a(2012) Standard Classification for Serviceability of an Office Facility for Support for Office Work" 2005,ASTM,"E1660-95a(2005) Standard Classification for Serviceability of an Office Facility for Support for Office Work" 1999,ASTM,"E1660-95a(1999) Standard Classification for Serviceability of an Office Facility for Support for Office Work" 2012,ASTM,"E165/E165M-12 Standard Practice for Liquid Penetrant Examination for General Industry" 2009,ASTM,"E165-09 Standard Practice for Liquid Penetrant Examination for General Industry" 1995,ASTM,"E165-95 Standard Test Method for Liquid Penetrant Examination" 2002,ASTM,"E165-02 Standard Test Method for Liquid Penetrant Examination" 2011,ASTM,"E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference" 1995,ASTM,"E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference" 2003,ASTM,"E1646-95(2003) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference" 2016,ASTM,"E1645-01(2016)e1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis" 1994,ASTM,"E1645-94 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis" 2001,ASTM,"E1645-01 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis" 2007,ASTM,"E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis" 2012,ASTM,"E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead" 1998,ASTM,"E1644-98 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead" 2004,ASTM,"E1644-04 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead" 2005,ASTM,"E1643-98(2005) Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2011,ASTM,"E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2009,ASTM,"E1643-09 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 1998,ASTM,"E1643-98 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2010,ASTM,"E1643-10 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs" 2013,ASTM,"E164-13 Standard Practice for Contact Ultrasonic Testing of Weldments" 1997,ASTM,"E164-97 Standard Practice for Ultrasonic Contact Examination of Weldments" 2008,ASTM,"E164-08 Standard Practice for Contact Ultrasonic Testing of Weldments" 2003,ASTM,"E164-03 Standard Practice for Ultrasonic Contact Examination of Weldment" 2013,ASTM,"E1638-13 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media" 2011,ASTM,"E1638-11a Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media" 2012,ASTM,"E1638-12 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media" 1999,ASTM,"E1638-94(1999) Standard Terminology Relating to Sieve Analysis" 2004,ASTM,"E1638-94(2004) Standard Terminology Relating to Sieve Analysis" 2007,ASTM,"E1638-07 Standard Terminology Relating to Sieves, Sieving Methods and Screening Media" 2010,ASTM,"E1638-10 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media" 2011,ASTM,"E1638-11 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media" 2007,ASTM,"E1638-07a Standard Terminology Relating to Sieves, Sieving Methods and Screening Media" 2009,ASTM,"E1638-09 Standard Terminology Relating to Sieves, Sieving Methods and Screening Media" 2003,ASTM,"E1637-98(2003) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems" 2011,ASTM,"E1637-98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems" 1998,ASTM,"E1637-98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems" 2016,ASTM,"E1623-16 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2014,ASTM,"E1623-14 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2002,ASTM,"E1623-02b Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2003,ASTM,"E1623-03a Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2002,ASTM,"E1623-02a Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2011,ASTM,"E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2002,ASTM,"E1623-02 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2001,ASTM,"E1623-01e1 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2003,ASTM,"E1623-03 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2009,ASTM,"E1623-09 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2004,ASTM,"E1623-04 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2001,ASTM,"E1623-01 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 2000,ASTM,"E1623-00 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)" 1997,ASTM,"E1620-97 Standard Terminology Relating to Liquid Particles and Atomization" 2012,ASTM,"E1620-97(2012) Standard Terminology Relating to Liquid Particles and Atomization " 2004,ASTM,"E1620-97(2004) Standard Terminology Relating to Liquid Particles and Atomization" 2015,ASTM,"E162-15b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2015,ASTM,"E162-15a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2015,ASTM,"E162-15 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2013,ASTM,"E162-13 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 1987,ASTM,"E162-87 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 1990,ASTM,"E162-90e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2012,ASTM,"E162-12a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2002,ASTM,"E162-02 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 1998,ASTM,"E162-98e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2011,ASTM,"E162-11a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2011,ASTM,"E162-11 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2002,ASTM,"E162-02ae1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2009,ASTM,"E162-09 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 1998,ASTM,"E162-98 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2008,ASTM,"E162-08b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2008,ASTM,"E162-08a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2008,ASTM,"E162-08 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2006,ASTM,"E162-06 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2002,ASTM,"E162-02a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source" 2014,ASTM,"E1617-09(2014)e1 Standard Practice for Reporting Particle Size Characterization Data" 1997,ASTM,"E1617-97 Standard Practice for Reporting Particle Size Characterization Data" 2002,ASTM,"E1617-97(2002) Standard Practice for Reporting Particle Size Characterization Data" 2007,ASTM,"E1617-97(2007) Standard Practice for Reporting Particle Size Characterization Data" 2009,ASTM,"E1617-09 Standard Practice for Reporting Particle Size Characterization Data" 2012,ASTM,"E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques " 1999,ASTM,"E1613-99 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques" 2004,ASTM,"E1613-04 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques" 2013,ASTM,"E1612/E1612M-94(2013)e1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures" 2009,ASTM,"E1612-94(2009) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures" 2005,ASTM,"E1612-94(2005) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures" 2000,ASTM,"E1612-94(2000) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures" 2012,ASTM,"E161-12 Standard Specification for Precision Electroformed Sieves " 2010,ASTM,"E161-00(2010) Standard Specification for Precision Electroformed Sieves" 2004,ASTM,"E161-00(2004) Standard Specification for Precision Electroformed Sieves" 2000,ASTM,"E161-00 Standard Specification for Precision Electroformed Sieves" 1996,ASTM,"E161-96 Standard Specification for Precision Electroformed Sieves" 2012,ASTM,"E1605-04(2012) Standard Terminology Relating to Lead in Buildings" 2003,ASTM,"E1605-03e1 Standard Terminology Relating to Lead in Buildings" 2002,ASTM,"E1605-02 Standard Terminology Relating to Lead in Buildings" 2004,ASTM,"E1605-04 Standard Terminology Relating to Lead in Buildings" 2003,ASTM,"E1605-03 Standard Terminology Relating to Lead in Buildings" 2001,ASTM,"E1605-01a Standard Terminology Relating to Lead in Buildings" 2001,ASTM,"E1605-01 Standard Terminology Relating to Lead in Buildings" 2000,ASTM,"E1605-00 Standard Terminology Relating to Lead in Buildings" 2010,ASTM,"E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 1994,ASTM,"E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 2003,ASTM,"E1602-03 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 2001,ASTM,"E1602-01 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters" 2015,ASTM,"E1597-10(2015) Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments" 1999,ASTM,"E1597-99 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments" 2010,ASTM,"E1597-10 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments" 2005,ASTM,"E1597-05 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments" 2001,ASTM,"E1592-01 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 2012,ASTM,"E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 2005,ASTM,"E1592-05 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 1998,ASTM,"E1592-98 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference" 2013,ASTM,"E1591-13 Standard Guide for Obtaining Data for Fire Growth Models" 2000,ASTM,"E1591-00e1 Standard Guide for Obtaining Data for Deterministic Fire Models" 2007,ASTM,"E1591-07 Standard Guide for Obtaining Data for Deterministic Fire Models" 2000,ASTM,"E1591-00 Standard Guide for Obtaining Data for Deterministic Fire Models" 2013,ASTM,"E1590-13 Standard Test Method for Fire Testing of Mattresses" 2012,ASTM,"E1590-12 Standard Test Method for Fire Testing of Mattresses " 1999,ASTM,"E1590-99 Standard Test Method for Fire Testing of Mattresses" 2007,ASTM,"E1590-07 Standard Test Method for Fire Testing of Mattresses" 2002,ASTM,"E1590-02 Standard Test Method for Fire Testing of Mattresses" 2001,ASTM,"E1590-01 Standard Test Method for Fire Testing of Mattresses" 2014,ASTM,"E1574-98(2014) Standard Test Method for Measurement of Sound in Residential Spaces" 2006,ASTM,"E1574-98(2006) Standard Test Method for Measurement of Sound in Residential Spaces" 1998,ASTM,"E1574-98 Standard Test Method for Measurement of Sound in Residential Spaces" 2009,ASTM,"E1573-09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels" 1998,ASTM,"E1573-93(1998) Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels" 2002,ASTM,"E1573-02 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels" 2014,ASTM,"E1561-93(2014) Standard Practice for Analysis of Strain Gage Rosette Data" 1998,ASTM,"E1561-93(1998) Standard Practice for Analysis of Strain Gage Rosette Data" 2003,ASTM,"E1561-93(2003) Standard Practice for Analysis of Strain Gage Rosette Data" 2009,ASTM,"E1561-93(2009) Standard Practice for Analysis of Strain Gage Rosette Data" 2015,ASTM,"E1557-09(2015) Standard Classification for Building Elements and Related Sitework—UNIFORMAT II" 1997,ASTM,"E1557-97e1 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2009,ASTM,"E1557-09 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2005,ASTM,"E1557-05e1 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2005,ASTM,"E1557-05 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2002,ASTM,"E1557-02 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II" 2012,ASTM,"E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair" 1998,ASTM,"E1556-98 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair" 2008,ASTM,"E1556-08 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair" 2003,ASTM,"E1556-03 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair" 2012,ASTM,"E1555-12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair" 1998,ASTM,"E1555-98 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair" 2008,ASTM,"E1555-08 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair" 2003,ASTM,"E1555-03 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair" 2016,ASTM,"E1551-16 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire (Redline)" 2016,ASTM,"E1551-16 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire" 2015,ASTM,"E1551-08(2015) Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment" 1998,ASTM,"E1551-93a(1998) Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment" 2008,ASTM,"E1551-08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment" 2006,ASTM,"E1551-06 Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment" 2015,ASTM,"E1546-15 Standard Guide for Development of Fire-Hazard-Assessment Standards (Redline)" 2015,ASTM,"E1546-15 Standard Guide for Development of Fire-Hazard-Assessment Standards" 2000,ASTM,"E1546-00e1 Standard Guide for Development of Fire-Hazard-Assessment Standards" 2009,ASTM,"E1546-09a Standard Guide for Development of Fire-Hazard-Assessment Standards" 2009,ASTM,"E1546-09 Standard Guide for Development of Fire-Hazard-Assessment Standards" 2007,ASTM,"E1546-07 Standard Guide for Development of Fire-Hazard-Assessment Standards" 2000,ASTM,"E1546-00 Standard Guide for Development of Fire-Hazard-Assessment Standards" 2013,ASTM,"E154/E154M-08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover" 1968,ASTM,"E154-68 Standard Methods Of Testing Materials For Use As Vapor Barriers Under Concrete Slabs And As Ground Cover In Crawl Spaces" 2005,ASTM,"E154-99(2005) Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover" 1999,ASTM,"E154-99 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover" 2008,ASTM,"E154-08 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover" 2008,ASTM,"E154-08a Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover" 2015,ASTM,"E1537-15 Standard Test Method for Fire Testing of Upholstered Furniture" 2013,ASTM,"E1537-13 Standard Test Method for Fire Testing of Upholstered Furniture" 2012,ASTM,"E1537-12 Standard Test Method for Fire Testing of Upholstered Furniture " 1999,ASTM,"E1537-99 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture" 2007,ASTM,"E1537-07 Standard Test Method for Fire Testing of Upholstered Furniture" 2002,ASTM,"E1537-02a Standard Test Method for Fire Testing of Upholstered Furniture" 2002,ASTM,"E1537-02 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture" 2001,ASTM,"E1537-01 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture" 2014,ASTM,"E1529-14 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2014,ASTM,"E1529-14a Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2010,ASTM,"E1529-10 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2013,ASTM,"E1529-13 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2006,ASTM,"E1529-06 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 2000,ASTM,"E1529-00 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies" 1997,ASTM,"E1527-97 Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process" 2005,ASTM,"E1527-05 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process" 2000,ASTM,"E1527-00 Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process" 1998,ASTM,"E1514-98 Standard Specification for Structural Standing Seam Steel Roof Panel Systems" 2003,ASTM,"E1514-98(2003) Standard Specification for Structural Standing Seam Steel Roof Panel Systems" 2011,ASTM,"E1514-98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems" 2015,ASTM,"E1512-01(2015) Standard Test Methods for Testing Bond Performance of Bonded Anchors" 1993,ASTM,"E1512-93 Standard Test Methods for Testing Bond Performance of Bonded Anchors" 2007,ASTM,"E1512-01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors" 2001,ASTM,"E1512-01 Standard Test Methods for Testing Bond Performance of Bonded Anchors" 2012,ASTM,"E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type" 2000,ASTM,"E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type" 2004,ASTM,"E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type" 2014,ASTM,"E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System" 2012,ASTM,"E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System " 2004,ASTM,"E1503-97(2004) Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System" 1997,ASTM,"E1503-97 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System" 2006,ASTM,"E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System" 2005,ASTM,"E1503-05 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System" 2013,ASTM,"E1489-08(2013) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device" 1998,ASTM,"E1489-98 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device" 2007,ASTM,"E1489-98(2007) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements
Made by an Inertial Profile Measuring Device" 2003,ASTM,"E1489-98(2003) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device" 2008,ASTM,"E1489-08 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device" 2012,ASTM,"E1488-12e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 2012,ASTM,"E1488-12 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 1996,ASTM,"E1488-96 Standard Guide for Statistical Procedures to Use in Developing and Applying ASTM Test Methods" 2002,ASTM,"E1488-02 Standard Guide for Statistical Procedures to Use in Developing and Applying ASTM Test Methods" 2002,ASTM,"E1488-02e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 2008,ASTM,"E1488-08 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 2008,ASTM,"E1488-08a Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 2009,ASTM,"E1488-09 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods" 2014,ASTM,"E1486M-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)" 1998,ASTM,"E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]" 2010,ASTM,"E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]" 2004,ASTM,"E1486M-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]" 2014,ASTM,"E1486-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria" 1998,ASTM,"E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria" 2010,ASTM,"E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria" 2004,ASTM,"E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria" 2008,ASTM,"E1481-00a(2008) Standard Terminology of Railing Systems and Rails for Buildings" 2000,ASTM,"E1481-00a Standard Terminology of Railing Systems and Rails for Buildings" 2013,ASTM,"E1480-92(2013) Standard Terminology of Facility Management (Building-Related)" 1998,ASTM,"E1480-92(1998)e1 Standard Terminology of Facility Management (Building-Related)" 2004,ASTM,"E1480-92(2004) Standard Terminology of Facility Management (Building-Related)" 2013,ASTM,"E1477-98a(2013) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers" 2008,ASTM,"E1477-98a(2008) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers" 2003,ASTM,"E1477-98a(2003) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers" 1998,ASTM,"E1477-98a Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers" 2014,ASTM,"E1474-14 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2004,ASTM,"E1474-04e1 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2010,ASTM,"E1474-10 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 1996,ASTM,"E1474-96a Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2007,ASTM,"E1474-07 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2004,ASTM,"E1474-04 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2002,ASTM,"E1474-02 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter" 2008,ASTM,"E1465-08 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings" 2007,ASTM,"E1465-07a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings" 2007,ASTM,"E1465-07 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings" 2006,ASTM,"E1465-06 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings" 2012,ASTM,"E1462-12 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules " 2000,ASTM,"E1462-00 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules" 2006,ASTM,"E1462-00(2006) Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules" 1992,ASTM,"E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles" 2001,ASTM,"E1458-92(2001) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles (Withdrawn 2010)" 2012,ASTM,"E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles" 1998,ASTM,"E1450-92(1998) Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium" 1998,ASTM,"E1450-92(1998)e1 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium" 2003,ASTM,"E1450-03 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium" 2009,ASTM,"E1450-09 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium" 2011,ASTM,"E145-94(2011) Standard Specification for Gravity-Convection and Forced-Ventilation Ovens" 2006,ASTM,"E145-94(2006) Standard Specification for Gravity-Convection And Forced-Ventilation Ovens" 1994,ASTM,"E145-94e1 Standard Specification for Gravity-Convection And Forced-Ventilation Ovens" 2001,ASTM,"E145-94(2001) Standard Specification for Gravity-Convection And Forced-Ventilation Ovens" 2015,ASTM,"E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness" 2013,ASTM,"E143-13 Standard Test Method for Shear Modulus at Room Temperature" 2008,ASTM,"E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature" 2002,ASTM,"E143-02 Standard Test Method for Shear Modulus at Room Temperature" 2001,ASTM,"E143-01 Standard Test Method for Shear Modulus at Room Temperature" 1998,ASTM,"E143-87(1998) Standard Test Method for Shear Modulus at Room Temperature" 2003,ASTM,"E1426-98(2003) Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress" 2009,ASTM,"E1426-98(2009)e1 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress" 1998,ASTM,"E1426-98 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress" 2014,ASTM,"E1425-14 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems (Redline)" 2014,ASTM,"E1425-14 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems" 1999,ASTM,"E1425-91(1999) Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors" 2007,ASTM,"E1425-07 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems" 2008,ASTM,"E1424-91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen" 2000,ASTM,"E1424-91(2000) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen" 2014,ASTM,"E1423-14 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems" 1999,ASTM,"E1423-99 Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems" 2006,ASTM,"E1423-06 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems" 2011,ASTM,"E1414/E1414M-11ae1 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum" 2010,ASTM,"E141-10 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling" 2003,ASTM,"E141-91(2003)e1 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling" 1997,ASTM,"E141-91(1997) Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling" 2013,ASTM,"E1402-13 Standard Guide for Sampling Design" 1999,ASTM,"E1402-99 Standard Terminology Relating to Sampling" 2008,ASTM,"E1402-08 Standard Terminology Relating to Sampling" 2008,ASTM,"E1402-08e1 Standard Terminology Relating to Sampling" 2012,ASTM,"E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness" 2012,ASTM,"E140-12 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2012,ASTM,"E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness" 2007,ASTM,"E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2012,ASTM,"E140-12a Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness" 2005,ASTM,"E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2005,ASTM,"E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2002,ASTM,"E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2002,ASTM,"E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 1997,ASTM,"E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 1997,ASTM,"E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness" 2013,ASTM,"E1399/E1399M-97(2013)e1 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems" 2009,ASTM,"E1399-97(2009) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems" 2005,ASTM,"E1399-97(2005) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems" 2000,ASTM,"E1399-97(2000) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems" 2011,ASTM,"E139-11 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials" 2006,ASTM,"E139-06 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials" 2000,ASTM,"E139-00e1 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials" 2000,ASTM,"E139-00 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials" 2011,ASTM,"E1374-06(2011) Standard Guide for Open Office Acoustics and Applicable ASTM Standards" 1998,ASTM,"E1374-93(1998)e1 Standard Guide for Open Office Acoustics and Applicable ASTM Standards" 2006,ASTM,"E1374-06 Standard Guide for Open Office Acoustics and Applicable ASTM Standards" 2002,ASTM,"E1374-02 Standard Guide for Open Office Acoustics and Applicable ASTM Standards" 2015,ASTM,"E1369-15 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2007,ASTM,"E1369-07e2 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2011,ASTM,"E1369-11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2007,ASTM,"E1369-07e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 1998,ASTM,"E1369-98 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2007,ASTM,"E1369-07 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2002,ASTM,"E1369-02 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems" 2012,ASTM,"E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method " 2005,ASTM,"E1364-95(2005) Standard Test Method for Measuring Road Roughness by Static Level Method" 2000,ASTM,"E1364-95(2000) Standard Test Method for Measuring Road Roughness by Static Level Method" 2015,ASTM,"E1362-15 Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells" 1999,ASTM,"E1362-99 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells" 2005,ASTM,"E1362-05 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells" 2010,ASTM,"E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells" 2016,ASTM,"E136-16 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2012,ASTM,"E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2011,ASTM,"E136-11 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2009,ASTM,"E136-09b Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2009,ASTM,"E136-09a Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 1999,ASTM,"E136-99e1 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC" 2009,ASTM,"E136-09 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2004,ASTM,"E136-04 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C" 2014,ASTM,"E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry" 1998,ASTM,"E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis" 2003,ASTM,"E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry" 2008,ASTM,"E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry" 2011,ASTM,"E1355-11 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2012,ASTM,"E1355-12 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 1997,ASTM,"E1355-97 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2005,ASTM,"E1355-05a Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2005,ASTM,"E1355-05 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2004,ASTM,"E1355-04a Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2004,ASTM,"E1355-04 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models" 2015,ASTM,"E1354-15a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2014,ASTM,"E1354-14 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2014,ASTM,"E1354-14e1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2015,ASTM,"E1354-15 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2013,ASTM,"E1354-13 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2002,ASTM,"E1354-02de1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2011,ASTM,"E1354-11a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2011,ASTM,"E1354-11b Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2010,ASTM,"E1354-10a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2010,ASTM,"E1354-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2011,ASTM,"E1354-11 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2009,ASTM,"E1354-09 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 1999,ASTM,"E1354-99 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2008,ASTM,"E1354-08a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2008,ASTM,"E1354-08 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2004,ASTM,"E1354-04a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2004,ASTM,"E1354-04 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2003,ASTM,"E1354-03 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2002,ASTM,"E1354-02d Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2002,ASTM,"E1354-02a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2002,ASTM,"E1354-02 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter" 2008,ASTM,"E1353-08ae1 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture" 2008,ASTM,"E1353-08a Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture" 2008,ASTM,"E1353-08 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture" 2002,ASTM,"E1353-02 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture" 1999,ASTM,"E1352-99 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies" 2002,ASTM,"E1352-02 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies" 2008,ASTM,"E1352-08a Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies" 2008,ASTM,"E1352-08 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies" 1998,ASTM,"E1349-90(1998) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry" 2006,ASTM,"E1349-06 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry" 2013,ASTM,"E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry" 2014,ASTM,"E1345-98(2014) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements" 1998,ASTM,"E1345-98 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements" 2003,ASTM,"E1345-98(2003) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements" 2008,ASTM,"E1345-98(2008) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements" 2008,ASTM,"E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements" 2012,ASTM,"E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire" 2008,ASTM,"E1337-90(2008) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire" 2002,ASTM,"E1337-90(2002) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire" 2014,ASTM,"E1333-14 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber" 2014,ASTM,"E1333-14 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber (Redline)" 2010,ASTM,"E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber" 2002,ASTM,"E1333-96(2002) Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber" 2010,ASTM,"E1332-10a Standard Classification for Rating Outdoor-Indoor Sound Attenuation" 2010,ASTM,"E1332-10 Standard Classification for Determination of Outdoor-Indoor Transmission Class" 2003,ASTM,"E1332-90(2003) Standard Classification for Determination of Outdoor-Indoor Transmission Class" 1998,ASTM,"E1332-90(1998) Standard Classification for Determination of Outdoor-Indoor Transmission Class" 2000,ASTM,"E1329-00 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis" 2010,ASTM,"E1329-10 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis" 2005,ASTM,"E1329-00(2005) Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis" 1997,ASTM,"E1325-91(1997) Standard Terminology Relating to Design of Experiments" 2002,ASTM,"E1325-02 Standard Terminology Relating to Design of Experiments" 2008,ASTM,"E1325-02(2008) Standard Terminology Relating to Design of Experiments" 1994,ASTM,"E1323-89(1994)e1 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data" 2002,ASTM,"E1323-89(2002) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data" 2009,ASTM,"E1323-09 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data" 2013,ASTM,"E1321-13 Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2002,ASTM,"E1321-97a(2002)e1 Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2009,ASTM,"E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2002,ASTM,"E1321-97a(2002) Standard Test Method for Determining Material Ignition and Flame Spread Properties" 1997,ASTM,"E1321-97a Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2008,ASTM,"E1321-08 Standard Test Method for Determining Material Ignition and Flame Spread Properties" 2004,ASTM,"E132-04 Standard Test Method for Poisson's Ratio at Room Temperature" 2010,ASTM,"E132-04(2010) Standard Test Method for Poisson's Ratio at Room Temperature" 1997,ASTM,"E132-97 Standard Test Method for Poisson's Ratio at Room Temperature" 2014,ASTM,"E1319-98(2014) Standard Guide for High-Temperature Static Strain Measurement" 2003,ASTM,"E1319-98(2003) Standard Guide for High-Temperature Static Strain Measurement" 2009,ASTM,"E1319-98(2009) Standard Guide for High-Temperature Static Strain Measurement" 1998,ASTM,"E1319-98 Standard Guide for High-Temperature Static Strain Measurement" 2000,ASTM,"E1318-00e1 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods" 2009,ASTM,"E1318-09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods" 2002,ASTM,"E1318-02 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods" 2012,ASTM,"E1317-12 Standard Test Method for Flammability of Marine Surface Finishes " 2002,ASTM,"E1317-97a(2002) Standard Test Method for Flammability of Marine Surface Finishes" 1997,ASTM,"E1317-97a Standard Test Method for Flammability of Marine Surface Finishes" 2008,ASTM,"E1317-08b Standard Test Method for Flammability of Marine Surface Finishes" 2008,ASTM,"E1317-08a Standard Test Method for Flammability of Marine Surface Finishes" 2008,ASTM,"E1317-08 Standard Test Method for Flammability of Marine Surface Finishes" 2010,ASTM,"E1307-10 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels" 2005,ASTM,"E1307-05 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels" 2000,ASTM,"E1307-00 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels" 2012,ASTM,"E1300-12 Standard Practice for Determining Load Resistance of Glass in Buildings" 2012,ASTM,"E1300-12a Standard Practice for Determining Load Resistance of Glass in Buildings" 2012,ASTM,"E1300-12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings" 2004,ASTM,"E1300-04e1 Standard Practice for Determining Load Resistance of Glass in Buildings" 2007,ASTM,"E1300-07e1 Standard Practice for Determining Load Resistance of Glass in Buildings" 2009,ASTM,"E1300-09a Standard Practice for Determining Load Resistance of Glass in Buildings" 2009,ASTM,"E1300-09 Standard Practice for Determining Load Resistance of Glass in Buildings" 2004,ASTM,"E1300-04 Standard Practice for Determining Load Resistance of Glass in Buildings" 2003,ASTM,"E1300-03 Standard Practice for Determining Load Resistance of Glass in Buildings" 2002,ASTM,"E1300-02 Standard Practice for Determining Load Resistance of Glass in Buildings" 2000,ASTM,"E1300-00 Standard Practice for Determining Load Resistance of Glass in Buildings" 2003,ASTM,"E1289-97(2003) Standard Specification for Reference Specimen for Sound Transmission Loss" 1997,ASTM,"E1289-97 Standard Specification for Reference Specimen for Sound Transmission Loss" 2008,ASTM,"E1289-08 Standard Specification for Reference Specimen for Sound Transmission Loss" 2012,ASTM,"E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph" 2008,ASTM,"E1274-03(2008) Standard Test Method for Measuring Pavement Roughness Using a Profilograph" 2003,ASTM,"E1274-03 Standard Test Method for Measuring Pavement Roughness Using a Profilograph" 2013,ASTM,"E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers" 2004,ASTM,"E1265-04 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers" 2014,ASTM,"E1264-14 Standard Classification for Acoustical Ceiling Products" 2008,ASTM,"E1264-08e1 Standard Classification for Acoustical Ceiling Products" 2008,ASTM,"E1264-08 Standard Classification for Acoustical Ceiling Products" 2005,ASTM,"E1264-98(2005) Standard Classification for Acoustical Ceiling Products" 1998,ASTM,"E1264-98 Standard Classification for Acoustical Ceiling Products" 1995,ASTM,"E1260-95 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments" 2003,ASTM,"E1260-03 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments" 2009,ASTM,"E1260-03(2009) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments" 2012,ASTM,"E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices" 1998,ASTM,"E1258-88(1998) Standard Test Method for Airflow Calibration of Fan Pressurization Devices" 2003,ASTM,"E1258-88(2003) Standard Test Method for Airflow Calibration of Fan Pressurization Devices" 2008,ASTM,"E1258-88(2008) Standard Test Method for Airflow Calibration of Fan Pressurization Devices" 2013,ASTM,"E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis" 1998,ASTM,"E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis" 2002,ASTM,"E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis" 2007,ASTM,"E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis" 2014,ASTM,"E1237-93(2014) Standard Guide for Installing Bonded Resistance Strain Gages" 1998,ASTM,"E1237-93(1998) Standard Guide for Installing Bonded Resistance Strain Gages" 2003,ASTM,"E1237-93(2003) Standard Guide for Installing Bonded Resistance Strain Gages" 2009,ASTM,"E1237-93(2009) Standard Guide for Installing Bonded Resistance Strain Gages" 2014,ASTM,"E1233/E1233M-14 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential" 2006,ASTM,"E1233-06 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential" 2000,ASTM,"E1233-00 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential" 1996,ASTM,"E1222-90(1996)e1 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems" 2009,ASTM,"E1222-90(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems" 2002,ASTM,"E1222-90(2002) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems" 1999,ASTM,"E122-99 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process" 2009,ASTM,"E122-09 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process" 2009,ASTM,"E122-09e1 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process" 2007,ASTM,"E122-07 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process" 2000,ASTM,"E122-00 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process" 2012,ASTM,"E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness" 2007,ASTM,"E1215-93(2007) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness" 2003,ASTM,"E1215-93(2003) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness" 1998,ASTM,"E1215-93(1998) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness" 2000,ASTM,"E1190-95(2000)e1 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members" 2011,ASTM,"E1190-11 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members" 2007,ASTM,"E1190-95(2007) Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members" 2000,ASTM,"E1190-95(2000) Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members" 2015,ASTM,"E119-15 Standard Test Methods for Fire Tests of Building Construction and Materials" 2014,ASTM,"E119-14 Standard Test Methods for Fire Tests of Building Construction and Materials" 1988,ASTM,"E119-88e1 Standard Test Methods for Fire Tests of Building Construction and Materials" 1998,ASTM,"E119-98 Standard Test Methods for Fire Tests of Building Construction and Materials" 2012,ASTM,"E119-12a Standard Test Methods for Fire Tests of Building Construction and Materials" 2012,ASTM,"E119-12 Standard Test Methods for Fire Tests of Building Construction and Materials" 2011,ASTM,"E119-11 Standard Test Methods for Fire Tests of Building Construction and Materials" 2010,ASTM,"E119-10a Standard Test Methods for Fire Tests of Building Construction and Materials" 2010,ASTM,"E119-10b Standard Test Methods for Fire Tests of Building Construction and Materials" 2010,ASTM,"E119-10 Standard Test Methods for Fire Tests of Building Construction and Materials" 2009,ASTM,"E119-09c Standard Test Methods for Fire Tests of Building Construction and Materials" 2009,ASTM,"E119-09b Standard Test Methods for Fire Tests of Building Construction and Materials" 2009,ASTM,"E119-09a Standard Test Methods for Fire Tests of Building Construction and Materials" 2011,ASTM,"E119-11a Standard Test Methods for Fire Tests of Building Construction and Materials" 2008,ASTM,"E119-08a Standard Test Methods for Fire Tests of Building Construction and Materials" 2008,ASTM,"E119-08 Standard Test Methods for Fire Tests of Building Construction and Materials" 2007,ASTM,"E119-07a Standard Test Methods for Fire Tests of Building Construction and Materials" 2007,ASTM,"E119-07 Standard Test Methods for Fire Tests of Building Construction and Materials" 2005,ASTM,"E119-05a Standard Test Methods for Fire Tests of Building Construction and Materials" 2005,ASTM,"E119-05 Standard Test Methods for Fire Tests of Building Construction and Materials" 2000,ASTM,"E119-00a Standard Test Methods for Fire Tests of Building Construction and Materials" 2009,ASTM,"E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems" 1998,ASTM,"E1186-98 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems" 2003,ASTM,"E1186-03 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems" 2015,ASTM,"E1185-15 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 2007,ASTM,"E1185-07e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 2012,ASTM,"E1185-12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 1998,ASTM,"E1185-93(1998)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 2007,ASTM,"E1185-07 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 2002,ASTM,"E1185-02 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems" 2013,ASTM,"E1179-13 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems" 2011,ASTM,"E1179-11 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems" 2003,ASTM,"E1179-87(2003) Standard Specification for Sound Sources Used for Testing Open Office Components and Systems" 1998,ASTM,"E1179-87(1998) Standard Specification for Sound Sources Used for Testing Open Office Components and Systems" 2007,ASTM,"E1179-07 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems" 1999,ASTM,"E1171-99 Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments" 2009,ASTM,"E1171-09 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments" 2004,ASTM,"E1171-04 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments" 2001,ASTM,"E1171-01 Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments" 2012,ASTM,"E1170-97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces " 2007,ASTM,"E1170-97(2007) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces" 2006,ASTM,"E1170-97(2006) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces" 2001,ASTM,"E1170-97(2001) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces" 1997,ASTM,"E1170-97 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces" 2014,ASTM,"E1169-14 Standard Practice for Conducting Ruggedness Tests" 2013,ASTM,"E1169-13a Standard Practice for Conducting Ruggedness Tests" 2012,ASTM,"E1169-12a Standard Practice for Conducting Ruggedness Tests" 2013,ASTM,"E1169-13 Standard Practice for Conducting Ruggedness Tests" 2012,ASTM,"E1169-12 Standard Practice for Conducting Ruggedness Tests" 1996,ASTM,"E1169-89(1996) Standard Guide for Conducting Ruggedness Tests" 2002,ASTM,"E1169-02 Standard Guide for Conducting Ruggedness Tests" 2007,ASTM,"E1169-07 Standard Practice for Conducting Ruggedness Tests" 2015,ASTM,"E1166-00(2015) Standard Guide for Network Level Pavement Management" 2009,ASTM,"E1166-00(2009) Standard Guide for Network Level Pavement Management" 2005,ASTM,"E1166-00(2005) Standard Guide for Network Level Pavement Management" 2000,ASTM,"E1166-00 Standard Guide for Network Level Pavement Management" 2014,ASTM,"E1155M-14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)" 1996,ASTM,"E1155M-96 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]" 2001,ASTM,"E1155M-96(2001) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]" 2008,ASTM,"E1155M-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric] " 2014,ASTM,"E1155-14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers" 1996,ASTM,"E1155-96 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers" 2001,ASTM,"E1155-96(2001) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers" 2008,ASTM,"E1155-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers " 2014,ASTM,"E1142-14b Standard Terminology Relating to Thermophysical Properties" 2014,ASTM,"E1142-14a Standard Terminology Relating to Thermophysical Properties" 2014,ASTM,"E1142-14 Standard Terminology Relating to Thermophysical Properties" 2012,ASTM,"E1142-12 Standard Terminology Relating to Thermophysical Properties" 1997,ASTM,"E1142-97 Standard Terminology Relating to Thermophysical Properties" 2003,ASTM,"E1142-97(2003) Standard Terminology Relating to Thermophysical Properties" 2004,ASTM,"E1142-04 Standard Terminology Relating to Thermophysical Properties" 2005,ASTM,"E1142-05 Standard Terminology Relating to Thermophysical Properties" 2006,ASTM,"E1142-06 Standard Terminology Relating to Thermophysical Properties" 2006,ASTM,"E1142-06a Standard Terminology Relating to Thermophysical Properties" 2011,ASTM,"E1142-11 Standard Terminology Relating to Thermophysical Properties" 2011,ASTM,"E1142-11a Standard Terminology Relating to Thermophysical Properties" 2011,ASTM,"E1142-11b Standard Terminology Relating to Thermophysical Properties" 2007,ASTM,"E1142-07 Standard Terminology Relating to Thermophysical Properties" 2013,ASTM,"E1142-13 Standard Terminology Relating to Thermophysical Properties" 2014,ASTM,"E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry" 1998,ASTM,"E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry" 2008,ASTM,"E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry" 2003,ASTM,"E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry" 1994,ASTM,"E1130-90(1994)e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index" 2002,ASTM,"E1130-02e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index" 2008,ASTM,"E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index" 2002,ASTM,"E1130-02 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index" 2010,ASTM,"E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method" 2004,ASTM,"E1124-97(2004) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method" 1997,ASTM,"E1124-97 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method" 2009,ASTM,"E1123-86(2009) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials" 2003,ASTM,"E1123-86(2003) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials" 1998,ASTM,"E1123-86(1998) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials" 2015,ASTM,"E1121-15 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 2012,ASTM,"E1121-12 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 1998,ASTM,"E1121-98 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 2002,ASTM,"E1121-02 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 2007,ASTM,"E1121-07 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 2007,ASTM,"E1121-07e1 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems" 2014,ASTM,"E1111/E1111M-14 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components" 1996,ASTM,"E1111-92(1996)e1 Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems" 2007,ASTM,"E1111-07 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components" 2005,ASTM,"E1111-05 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components" 2002,ASTM,"E1111-02 Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems" 2011,ASTM,"E1110-06(2011) Standard Classification for Determination of Articulation Class" 1994,ASTM,"E1110-86(1994)e1 Standard Classification for Determination of Articulation Class" 2006,ASTM,"E1110-06 Standard Classification for Determination of Articulation Class" 2001,ASTM,"E1110-01 Standard Classification for Determination of Articulation Class" 2010,ASTM,"E111-04(2010) Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus" 1997,ASTM,"E111-97 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus" 2004,ASTM,"E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus" 2015,ASTM,"E1105-15 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference" 2008,ASTM,"E1105-00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference" 2000,ASTM,"E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference" 2014,ASTM,"E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers" 2010,ASTM,"E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers" 2002,ASTM,"E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers" 1997,ASTM,"E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers" 2013,ASTM,"E11-13 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves" 1995,ASTM,"E11-95 Standard Specification for Wire Cloth and Sieves for Testing Purposes" 2009,ASTM,"ASTM E11 - 09e1 Standard Specification for Wire Cloth and Sieves for Testing Purposes" 2001,ASTM,"E11-01 Standard Specification for Wire Cloth and Sieves for Testing Purposes" 2009,ASTM,"E11-09e1 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves" 2009,ASTM,"E11-09 Standard Specification for Wire Cloth and Sieves for Testing Purposes" 2004,ASTM,"E11-04 Standard Specification for Wire Cloth and Sieves for Testing Purposes" 2013,ASTM,"E1091-13 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels" 1998,ASTM,"E1091-98 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels" 2008,ASTM,"E1091-08 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels" 2003,ASTM,"E1091-03 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels" 2012,ASTM,"E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness" 2007,ASTM,"E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness" 2002,ASTM,"E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness" 1995,ASTM,"E1082-90(1995) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness" 1980,ASTM,"E108-80a Standard Methods of Fire Tests Of Roof Coverings" 2010,ASTM,"E108-10a Standard Test Methods for Fire Tests of Roof Coverings" 2010,ASTM,"E108-10 Standard Test Methods for Fire Tests of Roof Coverings" 2011,ASTM,"E108-11 Standard Test Methods for Fire Tests of Roof Coverings" 2007,ASTM,"E108-07a Standard Test Methods for Fire Tests of Roof Coverings" 2007,ASTM,"E108-07 Standard Test Methods for Fire Tests of Roof Coverings" 2005,ASTM,"E108-05 Standard Test Methods for Fire Tests of Roof Coverings" 2004,ASTM,"E108-04 Standard Test Methods for Fire Tests of Roof Coverings" 2000,ASTM,"E108-00 Standard Test Methods for Fire Tests of Roof Coverings" 2015,ASTM,"E1074-15 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 1998,ASTM,"E1074-93(1998)e1 Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems" 2006,ASTM,"E1074-06e1 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 2009,ASTM,"E1074-09 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 2006,ASTM,"E1074-06e2 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 2006,ASTM,"E1074-06 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 2004,ASTM,"E1074-04 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems" 2015,ASTM,"E1057-15 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 2010,ASTM,"E1057-06(2010) Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 2006,ASTM,"E1057-06e1 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 1999,ASTM,"E1057-99 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 2006,ASTM,"E1057-06 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 2004,ASTM,"E1057-04 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems" 2010,ASTM,"E1050-10 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System" 2012,ASTM,"E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System" 2006,ASTM,"E1050-98(2006) Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System" 1998,ASTM,"E1050-98 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a Digital Frequency Analysis System" 2008,ASTM,"E1050-08 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System" 2007,ASTM,"E1050-07 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System" 2004,ASTM,"E105-04 Standard Practice for Probability Sampling Of Materials" 2010,ASTM,"E105-10 Standard Practice for Probability Sampling Of Materials" 1996,ASTM,"E105-58(1996) Standard Practice for Probability Sampling Of Materials" 2014,ASTM,"E1042-02(2014) Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray" 1997,ASTM,"E1042-92(1997)e1 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray" 2008,ASTM,"E1042-02(2008)e1 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray" 2008,ASTM,"E1042-02(2008) Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray" 2002,ASTM,"E1042-02 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray" 1998,ASTM,"E1040-98 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells" 2005,ASTM,"E1040-05 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells" 2010,ASTM,"E1040-10 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells" 2015,ASTM,"E1038-10(2015) Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls" 1998,ASTM,"E1038-98 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls" 2004,ASTM,"E1038-98(2004) Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls" 2010,ASTM,"E1038-10 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls" 2005,ASTM,"E1038-05 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls" 2012,ASTM,"E1036-12 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells " 2002,ASTM,"E1036-02 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells" 2007,ASTM,"E1036-02(2007) Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells" 2008,ASTM,"E1036-08 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells" 2012,ASTM,"E1032-12 Standard Test Method for Radiographic Examination of Weldments" 1995,ASTM,"E1032-95 Standard Test Method for Radiographic Examination of Weldments" 2001,ASTM,"E1032-01 Standard Test Method for Radiographic Examination of Weldments" 2006,ASTM,"E1032-06 Standard Test Method for Radiographic Examination of Weldments" 2012,ASTM,"E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials" 1998,ASTM,"E1025-98 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology" 2005,ASTM,"E1025-05 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology" 2011,ASTM,"E1025-11 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology" 2015,ASTM,"E1021-15 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices" 2012,ASTM,"E1021-12 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices " 1995,ASTM,"E1021-95 Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells" 2001,ASTM,"E1021-95(2001) Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells" 2006,ASTM,"E1021-06 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices" 1995,ASTM,"E1014-84(1995)e1 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels" 2012,ASTM,"E1014-12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels " 2000,ASTM,"E1014-84(2000) Standard Guide for Measurement of Outdoor A-Weighted Sound Levels" 2008,ASTM,"E1014-08 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels" 2014,ASTM,"E1012-14 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application" 2012,ASTM,"E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application" 1999,ASTM,"E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading" 2012,ASTM,"E1012-12 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application" 2005,ASTM,"E1012-05 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application" 2013,ASTM,"E1007-13b Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2013,ASTM,"E1007-13a Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2014,ASTM,"E1007-14 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2013,ASTM,"E1007-13 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2004,ASTM,"E1007-04e1 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2011,ASTM,"E1007-11 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2011,ASTM,"E1007-11e1 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 1997,ASTM,"E1007-97 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2004,ASTM,"E1007-04 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures" 2015,ASTM,"E10-15a Standard Test Method for Brinell Hardness of Metallic Materials" 2015,ASTM,"E10-15 Standard Test Method for Brinell Hardness of Metallic Materials" 2014,ASTM,"E10-14 Standard Test Method for Brinell Hardness of Metallic Materials" 2012,ASTM,"E10-12 Standard Test Method for Brinell Hardness of Metallic Materials" 2010,ASTM,"E10-10 Standard Test Method for Brinell Hardness of Metallic Materials" 2001,ASTM,"E10-01e1 Standard Test Method for Brinell Hardness of Metallic Materials" 2008,ASTM,"E10-08 Standard Test Method for Brinell Hardness of Metallic Materials" 2007,ASTM,"E10-07e1 Standard Test Method for Brinell Hardness of Metallic Materials" 2007,ASTM,"E10-07a Standard Test Method for Brinell Hardness of Metallic Materials" 2007,ASTM,"E10-07 Standard Test Method for Brinell Hardness of Metallic Materials" 2001,ASTM,"E10-01 Standard Test Method for Brinell Hardness of Metallic Materials" 2000,ASTM,"E10-00a Standard Test Method for Brinell Hardness of Metallic Materials" 2000,ASTM,"E10-00 Standard Test Method for Brinell Hardness of Metallic Materials" 2014,ASTM,"E1-14 Standard Specification for ASTM Liquid-in-Glass Thermometers (Redline)" 2014,ASTM,"E1-14 Standard Specification for ASTM Liquid-in-Glass Thermometers" 2013,ASTM,"E1-13 Standard Specification for ASTM Liquid-in-Glass Thermometers" 1998,ASTM,"E1-98e1 Standard Specification for ASTM Thermometers" 1998,ASTM,"E1-98 Standard Specification for ASTM Thermometers" 2007,ASTM,"E1-07 Standard Specification for ASTM Liquid-in-Glass Thermometers" 2005,ASTM,"E1-05 Standard Specification for ASTM Liquid-in-Glass Thermometers" 2003,ASTM,"E1-03a Standard Specification for ASTM Liquid-in-Glass Thermometers" 2003,ASTM,"E1-03 Standard Specification for ASTM Thermometers" 2001,ASTM,"E1-01 Standard Specification for ASTM Thermometers" 2013,ASTM,"D98-05(2013) Standard Specification for Calcium Chloride" 2015,ASTM,"D98-15 Standard Specification for Calcium Chloride (Redline)" 2015,ASTM,"D98-15 Standard Specification for Calcium Chloride" 1998,ASTM,"D98-98 Standard Specification for Calcium Chloride" 2005,ASTM,"D98-05 Standard Specification for Calcium Chloride" 2015,ASTM,"D979/D979M-15 Standard Practice for Sampling Bituminous Paving Mixtures" 2013,ASTM,"D977-13e1 Standard Specification for Emulsified Asphalt" 2013,ASTM,"D977-13 Standard Specification for Emulsified Asphalt" 2012,ASTM,"D977-12a Standard Specification for Emulsified Asphalt" 2012,ASTM,"D977-12b Standard Specification for Emulsified Asphalt" 2012,ASTM,"D977-12 Standard Specification for Emulsified Asphalt " 1998,ASTM,"D977-98 Standard Specification for Emulsified Asphalt" 2005,ASTM,"D977-05 Standard Specification for Emulsified Asphalt" 2003,ASTM,"D977-03 Standard Specification for Emulsified Asphalt" 2015,ASTM,"D975-15c Standard Specification for Diesel Fuel Oils" 2013,ASTM,"D975-13a Standard Specification for Diesel Fuel Oils" 2015,ASTM,"D975-15b Standard Specification for Diesel Fuel Oils" 2014,ASTM,"D975-14a Standard Specification for Diesel Fuel Oils" 2014,ASTM,"D975-14 Standard Specification for Diesel Fuel Oils" 2014,ASTM,"D975-14b Standard Specification for Diesel Fuel Oils" 2015,ASTM,"D975-15 Standard Specification for Diesel Fuel Oils" 2015,ASTM,"D975-15a Standard Specification for Diesel Fuel Oils" 1978,ASTM,"D975-78 Standard Specification for Diesel Fuel Oils" 1991,ASTM,"D975-91 Standard Specification for Diesel Fuel Oils" 1993,ASTM,"D975-93 Standard Specification for Diesel Fuel Oils" 2012,ASTM,"D975-12a Standard Specification for Diesel Fuel Oils" 1996,ASTM,"D975-96a Standard Specification for Diesel Fuel Oils" 2012,ASTM,"D975-12 Standard Specification for Diesel Fuel Oils" 2011,ASTM,"D975-11b Standard Specification for Diesel Fuel Oils" 2011,ASTM,"D975-11 Standard Specification for Diesel Fuel Oils" 2010,ASTM,"D975-10c Standard Specification for Diesel Fuel Oils" 2010,ASTM,"D975-10b Standard Specification for Diesel Fuel Oils" 2010,ASTM,"D975-10a Standard Specification for Diesel Fuel Oils" 2010,ASTM,"D975-10 Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04ce1 Standard Specification for Diesel Fuel Oils" 2009,ASTM,"D975-09b Standard Specification for Diesel Fuel Oils" 2009,ASTM,"D975-09a Standard Specification for Diesel Fuel Oils" 2009,ASTM,"D975-09 Standard Specification for Diesel Fuel Oils" 2008,ASTM,"D975-08a Standard Specification for Diesel Fuel Oils" 2008,ASTM,"D975-08 Standard Specification for Diesel Fuel Oils" 2007,ASTM,"D975-07b Standard Specification for Diesel Fuel Oils" 2007,ASTM,"D975-07a Standard Specification for Diesel Fuel Oils" 2007,ASTM,"D975-07 Standard Specification for Diesel Fuel Oils" 2006,ASTM,"D975-06b Standard Specification for Diesel Fuel Oils" 2006,ASTM,"D975-06a Standard Specification for Diesel Fuel Oils" 2006,ASTM,"D975-06 Standard Specification for Diesel Fuel Oils" 2005,ASTM,"D975-05 Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04c Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04b Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04a Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04 Standard Specification for Diesel Fuel Oils" 2003,ASTM,"D975-03 Standard Specification for Diesel Fuel Oils" 2002,ASTM,"D975-02 Standard Specification for Diesel Fuel Oils" 2001,ASTM,"D975-01a Standard Specification for Diesel Fuel Oils" 2001,ASTM,"D975-01 Standard Specification for Diesel Fuel Oils" 2000,ASTM,"D975-00 Standard Specification for Diesel Fuel Oils" 2008,ASTM,"D975-08ae1 Standard Specification for Diesel Fuel Oils" 2013,ASTM,"D975-13 Standard Specification for Diesel Fuel Oils" 2004,ASTM,"D975-04be1 Standard Specification for Diesel Fuel Oils" 1998,ASTM,"D975-98be1 Standard Specification for Diesel Fuel Oils" 2016,ASTM,"D97-16 Standard Test Method for Pour Point of Petroleum Products" 2015,ASTM,"D97-15 Standard Test Method for Pour Point of Petroleum Products" 1987,ASTM,"D97-87e1 Standard Test Method for Pour Point of Petroleum Oils" 2012,ASTM,"D97-12 Standard Test Method for Pour Point of Petroleum Products" 2011,ASTM,"D97-11 Standard Test Method for Pour Point of Petroleum Products" 2008,ASTM,"D97-08 Standard Test Method for Pour Point of Petroleum Products" 2007,ASTM,"D97-07 Standard Test Method for Pour Point of Petroleum Products" 2006,ASTM,"D97-06 Standard Test Method for Pour Point of Petroleum Products" 2005,ASTM,"D97-05a Standard Test Method for Pour Point of Petroleum Products" 2005,ASTM,"D97-05 Standard Test Method for Pour Point of Petroleum Products" 2004,ASTM,"D97-04 Standard Test Method for Pour Point of Petroleum Products" 2002,ASTM,"D97-02 Standard Test Method for Pour Point of Petroleum Products" 1996,ASTM,"D97-96a Standard Test Method for Pour Point of Petroleum Products" 2009,ASTM,"D97-09 Standard Test Method for Pour Point of Petroleum Products" 2015,ASTM,"D968-15 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 1986,ASTM,"D968-81(1986)e1 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 2010,ASTM,"D968-05(2010) Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 2001,ASTM,"D968-93(2001) Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 1993,ASTM,"D968-93 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 2005,ASTM,"D968-05 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 2005,ASTM,"D968-05e1 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive" 2015,ASTM,"D952-15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials (Redline)" 2015,ASTM,"D952-15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials" 2010,ASTM,"D952-10 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials" 1995,ASTM,"D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials" 2002,ASTM,"D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials" 2011,ASTM,"D950-03(2011) Standard Test Method for Impact Strength of Adhesive Bonds" 2003,ASTM,"D950-03 Standard Test Method for Impact Strength of Adhesive Bonds" 2015,ASTM,"D946/D946M-15 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction (Redline)" 2015,ASTM,"D946/D946M-15 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction" 2015,ASTM,"D93-15a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2013,ASTM,"D93-13e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2015,ASTM,"D93-15 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 1990,ASTM,"D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester" 1997,ASTM,"D93-97 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester" 2013,ASTM,"D93-13 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 1980,ASTM,"D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester" 1985,ASTM,"D93-85 Standard Test Method for Flash Point by Pensky-Martens Closed Tester" 1994,ASTM,"D93-94 Standard Test Method for Flash Point by Pensky-Martens Closed Tester" 1971,ASTM,"D93-71 Standard Method Of Test For Flash Point By Pensky-Martens Closed Tester" 2012,ASTM,"D93-12 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2010,ASTM,"D93-10 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2011,ASTM,"D93-11 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2010,ASTM,"D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2009,ASTM,"D93-09 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2008,ASTM,"D93-08 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2007,ASTM,"D93-07 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2006,ASTM,"D93-06 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester" 2002,ASTM,"D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester" 2002,ASTM,"D93-02 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester" 2015,ASTM,"D923-15 Standard Practices for Sampling Electrical Insulating Liquids" 1986,ASTM,"D923-86 Standard Methods of Sampling Electrical Insulating Liquids" 1989,ASTM,"D923-89 Standard Methods of Sampling Electrical Insulating Liquids" 2007,ASTM,"D923-07 Standard Practices for Sampling Electrical Insulating Liquids" 1985,ASTM,"D92-85 Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 1997,ASTM,"D92-97 Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 2012,ASTM,"D92-12a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2012,ASTM,"D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2011,ASTM,"D92-11 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2010,ASTM,"D92-05a(2010) Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2012,ASTM,"D92-12 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 1998,ASTM,"D92-98a Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 2005,ASTM,"D92-05a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2005,ASTM,"D92-05 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2002,ASTM,"D92-02b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2002,ASTM,"D92-02a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester" 2002,ASTM,"D92-02 Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 2001,ASTM,"D92-01 Standard Test Method for Flash and Fire Points by Cleveland Open Cup" 2013,ASTM,"D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading" 1998,ASTM,"D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading" 2008,ASTM,"D905-08 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading" 2003,ASTM,"D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading" 2008,ASTM,"D905-08e1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading" 2010,ASTM,"D903-98(2010) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds" 2004,ASTM,"D903-98(2004) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds" 1998,ASTM,"D903-98 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds" 2012,ASTM,"D9-12 Standard Terminology Relating to Wood and Wood-Based Products (Redline)" 2012,ASTM,"D9-12 Standard Terminology Relating to Wood and Wood-Based Products" 2009,ASTM,"D9-09ae1 Standard Terminology Relating to Wood and Wood-Based Products" 1999,ASTM,"D9-87(1999)e1 Standard Terminology Relating to Wood" 2009,ASTM,"D9-09a Standard Terminology Relating to Wood and Wood-Based Products" 2009,ASTM,"D9-09 Standard Terminology Relating to Wood and Wood-Based Products" 1999,ASTM,"D9-87(1999) Standard Terminology Relating to Wood" 2005,ASTM,"D9-05 Standard Terminology Relating to Wood and Wood-Based Products" 1997,ASTM,"D882-97 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2012,ASTM,"D882-12 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2010,ASTM,"D882-10 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2009,ASTM,"D882-09 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2002,ASTM,"D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2001,ASTM,"D882-01 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2000,ASTM,"D882-00 Standard Test Method for Tensile Properties of Thin Plastic Sheeting" 2013,ASTM,"D88-07(2013) Standard Test Method for Saybolt Viscosity" 1987,ASTM,"D88-81(1987)e1 Standard Test Method for Saybolt Viscosity" 1968,ASTM,"D88-56(1968) Standard Method Of Test For Saybolt Viscosity" 2005,ASTM,"D88-94(2005) Standard Test Method for Saybolt Viscosity" 1999,ASTM,"D88-94(1999) Standard Test Method for Saybolt Viscosity" 2007,ASTM,"D88-07 Standard Test Method for Saybolt Viscosity" 2013,ASTM,"D877/D877M-13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 2007,ASTM,"D877-02(2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 2002,ASTM,"D877-02e1 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 2002,ASTM,"D877-02 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 1995,ASTM,"D877-87(1995) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 2000,ASTM,"D877-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes" 2013,ASTM,"D876-13 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation" 2009,ASTM,"D876-09 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation" 2007,ASTM,"D876-00(2007)e1 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation" 2000,ASTM,"D876-00 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation" 2009,ASTM,"D870-09 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion" 1997,ASTM,"D870-97 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion" 2002,ASTM,"D870-02 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion" 2014,ASTM,"D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2009,ASTM,"D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 1999,ASTM,"D87-87(1999) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2007,ASTM,"D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2007,ASTM,"D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2004,ASTM,"D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)" 2015,ASTM,"D86-15 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure" 1982,ASTM,"D86-82e2 Standard Method for Distillation of Petroleum Products" 1990,ASTM,"D86-90e2 Standard Test Method for Distillation of Petroleum Products" 1993,ASTM,"D86-93 Standard Test Method for Distillation of Petroleum Products" 1995,ASTM,"D86-95 Standard Test Method for Distillation of Petroleum Products" 1996,ASTM,"D86-96 Standard Test Method for Distillation of Petroleum Products" 2012,ASTM,"D86-12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 1978,ASTM,"D86-78 Standard Method for Distillation Of Petroleum Products" 2011,ASTM,"D86-11a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2011,ASTM,"D86-11 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2010,ASTM,"D86-10 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2010,ASTM,"D86-10a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2009,ASTM,"D86-09e1 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2011,ASTM,"D86-11b Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2009,ASTM,"D86-09 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2008,ASTM,"D86-08a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2008,ASTM,"D86-08 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2007,ASTM,"D86-07b Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2007,ASTM,"D86-07a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2007,ASTM,"D86-07 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2005,ASTM,"D86-05 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2004,ASTM,"D86-04b Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2004,ASTM,"D86-04a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2004,ASTM,"D86-04 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2003,ASTM,"D86-03 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2002,ASTM,"D86-02 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2001,ASTM,"D86-01 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2000,ASTM,"D86-00a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2001,ASTM,"D86-01e1 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" 2000,ASTM,"D859-00 Standard Test Method for Silica in Water" 2010,ASTM,"D859-10 Standard Test Method for Silica in Water" 2005,ASTM,"D859-05 Standard Test Method for Silica in Water" 2012,ASTM,"D858-12 Standard Test Methods for Manganese in Water" 2007,ASTM,"D858-07 Standard Test Methods for Manganese in Water" 2002,ASTM,"D858-02 Standard Test Methods for Manganese in Water" 1995,ASTM,"D858-95 Standard Test Methods for Manganese in Water" 2005,ASTM,"D854-05 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2002,ASTM,"D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2000,ASTM,"D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2000,ASTM,"D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2010,ASTM,"D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2006,ASTM,"D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer" 2013,ASTM,"D852-13 Standard Test Method for Solidification Point of Benzene" 2008,ASTM,"D852-08 Standard Test Method for Solidification Point of Benzene" 2002,ASTM,"D852-02 Standard Test Method for Solidification Point of Benzene" 2000,ASTM,"D852-00 Standard Test Method for Solidification Point of Benzene" 2011,ASTM,"D850-11 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2008,ASTM,"D850-03(2008)e1 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2003,ASTM,"D850-03 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2002,ASTM,"D850-02e1 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2000,ASTM,"D850-00 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials" 2015,ASTM,"D849-15 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2005,ASTM,"D849-05 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2011,ASTM,"D849-11 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2009,ASTM,"D849-09 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2003,ASTM,"D849-03 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2002,ASTM,"D849-02 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 1997,ASTM,"D849-97 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons" 2014,ASTM,"D848-14 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons" 2003,ASTM,"D848-03 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons" 2009,ASTM,"D848-09 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons" 2002,ASTM,"D848-02 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons" 1997,ASTM,"D848-97 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons" 2015,ASTM,"D847-15 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 2008,ASTM,"D847-08 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 2004,ASTM,"D847-04 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 2000,ASTM,"D847-96(2000) Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 1996,ASTM,"D847-96 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons" 2001,ASTM,"D843-97(2001) Standard Specification for Nitration Grade Xylene" 2006,ASTM,"D843-97(2006) Standard Specification for Nitration Grade Xylene" 2006,ASTM,"D843-06 Standard Specification for Nitration Grade Xylene" 2011,ASTM,"D843-06(2011)e1 Standard Specification for Nitration Grade Xylene" 1997,ASTM,"D843-97 Standard Specification for Nitration Grade Xylene" 2013,ASTM,"D841-13 Standard Specification for Nitration Grade Toluene" 2012,ASTM,"D841-12 Standard Specification for Nitration Grade Toluene" 1997,ASTM,"D841-97 Standard Specification for Nitration Grade Toluene" 2011,ASTM,"D841-11 Standard Specification for Nitration Grade Toluene" 2010,ASTM,"D841-10 Standard Specification for Nitration Grade Toluene" 2008,ASTM,"D841-02(2008)e1 Standard Specification for Nitration Grade Toluene" 2002,ASTM,"D841-02 Standard Specification for Nitration Grade Toluene" 2012,ASTM,"D832-07(2012) Standard Practice for Rubber Conditioning For Low Temperature Testing" 2001,ASTM,"D832-92(2001)e1 Standard Practice for Rubber Conditioning For Low-Temperature Testing" 1997,ASTM,"D832-92(1997) Standard Practice for Rubber Conditioning For Low-Temperature Testing" 2007,ASTM,"D832-07 Standard Practice for Rubber Conditioning For Low Temperature Testing" 2013,ASTM,"D822/D822M-13 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings" 1980,ASTM,"D822-80 Standard Practice for Operating Light - and Water-Exposure Apparatus (Carbon-Arc Type) For Testing Paint, Varnish, Lacquer, and Related Products" 1989,ASTM,"D822-89 Standard Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus" 1996,ASTM,"D822-96 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings" 2001,ASTM,"D822-01 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings" 2006,ASTM,"D822-01(2006) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings" 2001,ASTM,"D816-82(2001) Standard Test Methods for Rubber Cements" 1993,ASTM,"D816-82(1993)e1 Standard Test Methods for Rubber Cements" 2011,ASTM,"D816-06(2011) Standard Test Methods for Rubber Cements " 2006,ASTM,"D816-06 Standard Test Methods for Rubber Cements" 2011,ASTM,"D806-11 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures" 2000,ASTM,"D806-00 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures" 2006,ASTM,"D806-00(2006) Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures" 2015,ASTM,"D8005-15 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)" 2015,ASTM,"D8-15 Standard Terminology Relating to Materials for Roads and Pavements" 2013,ASTM,"D8-13b Standard Terminology Relating to Materials for Roads and Pavements" 2013,ASTM,"D8-13a Standard Terminology Relating to Materials for Roads and Pavements" 2013,ASTM,"D8-13 Standard Terminology Relating to Materials for Roads and Pavements" 2012,ASTM,"D8-12 Standard Terminology Relating to Materials for Roads and Pavements " 2011,ASTM,"D8-11 Standard Terminology Relating to Materials for Roads and Pavements" 1997,ASTM,"D8-97 Standard Terminology Relating to Materials for Roads and Pavements" 2015,ASTM,"D7954/D7954M-15a Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners (Redline)" 2015,ASTM,"D7954/D7954M-15a Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners" 2015,ASTM,"D7954/D7954M-15 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners" 2014,ASTM,"D7954/D7954M-14 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners" 2014,ASTM,"D7953-14 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method" 2014,ASTM,"D7951-14 Standard Specification for Disproportionation (TDP) Toluene" 2014,ASTM,"D7949-14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations" 2014,ASTM,"D7929-14 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells" 2013,ASTM,"D792-13 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (Redline)" 2013,ASTM,"D792-13 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement" 1998,ASTM,"D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement" 2000,ASTM,"D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement" 2008,ASTM,"D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement" 2014,ASTM,"D7909-14 Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes" 2014,ASTM,"D7906-14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator" 2015,ASTM,"D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2015,ASTM,"D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2015,ASTM,"D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2003,ASTM,"D790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2000,ASTM,"D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2010,ASTM,"D790-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2002,ASTM,"D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2007,ASTM,"D790-07e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2007,ASTM,"D790-07 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials" 2015,ASTM,"D7897-15 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance" 2015,ASTM,"D789-15 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)" 2015,ASTM,"D789-15 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) (Redline)" 2007,ASTM,"D789-07 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)" 2007,ASTM,"D789-07e1 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)" 2006,ASTM,"D789-06a Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)" 2006,ASTM,"D789-06 Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA)" 2005,ASTM,"D789-05 Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA) 1,2" 2004,ASTM,"D789-04 Standard Test Method for Determination of Relative Viscosity of Polyamide (PA)" 1998,ASTM,"D789-98 Standard Test Methods for Determination of Relative Viscosity and Moisture Content of Polyamide (PA)" 2013,ASTM,"D7884-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography" 2013,ASTM,"D7883-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography" 2013,ASTM,"D7882-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode" 2013,ASTM,"D7881-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode" 2013,ASTM,"D7880/D7880M-13 Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag" 2014,ASTM,"D7877-14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes" 2013,ASTM,"D7871-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)" 2013,ASTM,"D7870/D7870M-13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure" 2013,ASTM,"D7865-13 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels" 2015,ASTM,"D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids" 2013,ASTM,"D7853-13 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete" 2013,ASTM,"D7852-13 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys" 2015,ASTM,"D785-08(2015) Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials" 2008,ASTM,"D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (Redline)" 1998,ASTM,"D785-98e1 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials" 2008,ASTM,"D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials" 2003,ASTM,"D785-03 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials" 2014,ASTM,"D7832/D7832M-14 Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)" 2014,ASTM,"D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge (Redline)" 2014,ASTM,"D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge" 2013,ASTM,"D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge" 2012,ASTM,"D7780-12 Standard Practice for Geospatial Data for Representing Coal Mining Features" 2012,ASTM,"D7770-12 Standard Test Method for ???Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method" 2012,ASTM,"D7765-12 Standard Practice for Use of Foundry Sand in Structural Fill and Embankments" 2012,ASTM,"D7764-12 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers" 2011,ASTM,"D7762-11 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash" 2012,ASTM,"D7760-12 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter" 2014,ASTM,"D7759/D7759M-14 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration (Redline)" 2014,ASTM,"D7759/D7759M-14 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration" 2011,ASTM,"D7758-11 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations" 2011,ASTM,"D7749-11 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method" 2014,ASTM,"D7748/D7748M-14 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products (Redline)" 2014,ASTM,"D7748/D7748M-14 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products" 2011,ASTM,"D7746-11 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests" 2012,ASTM,"D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders" 2015,ASTM,"D7737/D7737M-15 Standard Test Method for Individual Geogrid Junction Strength (Redline)" 2015,ASTM,"D7737/D7737M-15 Standard Test Method for Individual Geogrid Junction Strength" 2012,ASTM,"D7704-12 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration" 2011,ASTM,"D7704-11 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration" 2016,ASTM,"D7703-16 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method (Redline)" 2016,ASTM,"D7703-16 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method" 2015,ASTM,"D7703-15 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method" 2011,ASTM,"D7703-11 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System" 2014,ASTM,"D7702/D7702M-14 Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics" 2011,ASTM,"D7701-11 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag" 2015,ASTM,"D7700-15 Standard Guide for Selecting Test Methods for Geomembrane Seams" 2015,ASTM,"D7700-15 Standard Guide for Selecting Test Methods for Geomembrane Seams (Redline)" 2012,ASTM,"D7700-12 Standard Guide for Selecting Test Methods for Geomembrane Seams" 2011,ASTM,"D7699/D7699M-11 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites" 2011,ASTM,"D7698-11a Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method (Redline)" 2011,ASTM,"D7698-11a Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method" 2011,ASTM,"D7698-11 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and    Aggregate by Correlation with Complex Impedance Method" 2012,ASTM,"D769-01(2012) Standard Specification for Black Synthetic Iron Oxide" 2007,ASTM,"D769-01(2007) Standard Specification for Black Synthetic Iron Oxide" 1995,ASTM,"D769-87(1995)e1 Standard Specification for Black Synthetic Iron Oxide" 2001,ASTM,"D769-01 Standard Specification for Black Synthetic Iron Oxide" 2014,ASTM,"D7672-14 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2014,ASTM,"D7672-14 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies (Redline)" 2013,ASTM,"D7672-13 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2012,ASTM,"D7672-12 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2011,ASTM,"D7672-11be1 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2011,ASTM,"D7672-11b Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2011,ASTM,"D7672-11a Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2011,ASTM,"D7672-11 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2011,ASTM,"D7672-11e1 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies" 2010,ASTM,"D7664-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils" 2012,ASTM,"D7663-12 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations (Redline)" 2012,ASTM,"D7663-12 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations" 2011,ASTM,"D7663-11 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations" 2012,ASTM,"D7655/D7655M-12 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems" 2010,ASTM,"D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer" 2012,ASTM,"D7648-12 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment" 2010,ASTM,"D7643-10 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders" 2011,ASTM,"D7636/D7636M-11 Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems" 2010,ASTM,"D7635/D7635M-10 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement" 2010,ASTM,"D7626-10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay" 2010,ASTM,"D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method" 2010,ASTM,"D7613-10 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes" 2015,ASTM,"D7612-10(2015) Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources" 2010,ASTM,"D7612-10 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources" 2010,ASTM,"D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces" 2011,ASTM,"D7586/D7586M-11 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies" 2015,ASTM,"D7585/D7585M-10(2015) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments" 2010,ASTM,"D7585/D7585M-10 Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments" 2009,ASTM,"D7564/D7564M-09 Standard Practice for Construction of Asphalt-Rubber Cape Seal" 2015,ASTM,"D7564/D7564M-09(2015) Standard Practice for Construction of Asphalt-Rubber Cape Seal" 2010,ASTM,"D7556-10 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests" 2015,ASTM,"D7553-15 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide (Redline)" 2015,ASTM,"D7553-15 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide" 2010,ASTM,"D7553-10 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide" 2009,ASTM,"D7553-09 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide" 2014,ASTM,"D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer" 2009,ASTM,"D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer" 2009,ASTM,"D7536-09 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry" 2010,ASTM,"D7530/D7530M-10 Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules" 2011,ASTM,"D7519-11 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting" 2006,ASTM,"D751-06 Standard Test Methods for Coated Fabrics (Redline)" 1995,ASTM,"D751-95e1 Standard Test Methods for Coated Fabrics" 2011,ASTM,"D751-06(2011) Standard Test Methods for Coated Fabrics" 2000,ASTM,"D751-00e1 Standard Test Methods for Coated Fabrics" 2006,ASTM,"D751-06 Standard Test Methods for Coated Fabrics" 2000,ASTM,"D751-00 Standard Test Methods for Coated Fabrics" 2010,ASTM,"D7505/D7505M-10 Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules" 2015,ASTM,"D7504-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2015,ASTM,"D7504-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2009,ASTM,"D7504-09e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2010,ASTM,"D7504-10 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2011,ASTM,"D7504-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2009,ASTM,"D7504-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2012,ASTM,"D7504-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number" 2010,ASTM,"D7503-10 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils" 2013,ASTM,"D75/D75M-13 Standard Practice for Sampling Aggregates (Redline)" 2013,ASTM,"D75/D75M-13 Standard Practice for Sampling Aggregates" 2014,ASTM,"D7499/D7499M-09(2014) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness" 2009,ASTM,"D7499/D7499M-09 Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness" 2014,ASTM,"D7498/D7498M-09(2014)e1 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test" 2009,ASTM,"D7497-09 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique" 2011,ASTM,"D7496-11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer" 2017,ASTM,"C656-17 Standard Specification for Structural Insulating Board, Calcium Silicate" 2009,ASTM,"D7496-09 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer" 2012,ASTM,"D7495-12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials" 2011,ASTM,"D7492/D7492M-11 Standard Guide for Use of Drainage System Media with Waterproofing Systems" 2017,ASTM,"C652-17a Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)" 2014,ASTM,"D7480-08(2014) Standard Guide for Evaluating the Attributes of a Forest Management Plan" 2008,ASTM,"D7480-08 Standard Guide for Evaluating the Attributes of a Forest Management Plan" 2015,ASTM,"D7470-08(2015) Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs" 2008,ASTM,"D7470-08 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs" 2010,ASTM,"D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Redline)" 2010,ASTM,"D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam" 1999,ASTM,"D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam" 2008,ASTM,"D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam" 2002,ASTM,"D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam" 2012,ASTM,"D7469-12 Standard Test Methods for End-Joints in Structural Wood Products" 2008,ASTM,"D7469-08 Standard Test Methods for End-Joints in Structural Wood Products" 2009,ASTM,"D7469-09 Standard Test Methods for End-Joints in Structural Wood Products" 2010,ASTM,"D7469-10 Standard Test Methods for End-Joints in Structural Wood Products" 2015,ASTM,"D7467-15ce1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7467-15c Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7467-15b Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2014,ASTM,"D7467-14 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7467-15 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7467-15e1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7467-15a Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2013,ASTM,"D7467-13 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2008,ASTM,"D7467-08 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2010,ASTM,"D7467-10 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2009,ASTM,"D7467-09 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2009,ASTM,"D7467-09a Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)" 2015,ASTM,"D7466/D7466M-10(2015)e1 Standard Test Method for Measuring Asperity Height of Textured Geomembranes" 2015,ASTM,"D7465/D7465M-15e1 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications" 2015,ASTM,"D7465/D7465M-15 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications (Redline)" 2015,ASTM,"D7465/D7465M-15 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications" 2008,ASTM,"D7460-08 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending" 2010,ASTM,"D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending" 2014,ASTM,"D746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact" 2014,ASTM,"D746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact (Redline)" 2013,ASTM,"D746-13 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact" 1998,ASTM,"D746-98e1 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact" 2007,ASTM,"D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact" 2004,ASTM,"D746-04 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact" 2014,ASTM,"D7458-14 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection (Redline)" 2014,ASTM,"D7458-14 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection" 2008,ASTM,"D7458-08 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection" 2012,ASTM,"D7457-12 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Redline)" 2012,ASTM,"D7457-12 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2011,ASTM,"D7457-11 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2011,ASTM,"D7457-11e1 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2013,ASTM,"D7438-13 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters (Redline)" 2013,ASTM,"D7438-13 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters" 2008,ASTM,"D7438-08 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters" 2013,ASTM,"D7433-13 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels (Redline)" 2013,ASTM,"D7433-13 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels" 2008,ASTM,"D7433-08 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels" 2015,ASTM,"D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2015,ASTM,"D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus (Redline)" 2008,ASTM,"D7428-08 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2008,ASTM,"D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2007,ASTM,"D7409-07 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns" 2007,ASTM,"D7409-07e1 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns" 2012,ASTM,"D7408-12 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams (Redline)" 2012,ASTM,"D7408-12 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams " 2008,ASTM,"D7408-08 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams" 2012,ASTM,"D7407-07(2012) Standard Guide for Determining The Transmission of Gases Through Geomembranes" 2007,ASTM,"D7407-07 Standard Guide for Determining The Transmission of Gases Through Geomembranes" 2012,ASTM,"D7406-07(2012) Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products" 2007,ASTM,"D7406-07 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products" 2015,ASTM,"D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer (Redline)" 2015,ASTM,"D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer" 2008,ASTM,"D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer" 2008,ASTM,"D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer " 2010,ASTM,"D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer " 2010,ASTM,"D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer " 2012,ASTM,"D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer" 2007,ASTM,"D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer" 2009,ASTM,"D7403-09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation" 2009,ASTM,"D7402-09 Standard Practice for Identifying Cationic Emulsified Asphalts" 2014,ASTM,"D7400-14 Standard Test Methods for Downhole Seismic Testing" 2017,ASTM,"C635/C635M-17 Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings" 2007,ASTM,"D7400-07 Standard Test Methods for Downhole Seismic Testing" 2008,ASTM,"D7400-08 Standard Test Methods for Downhole Seismic Testing" 2008,ASTM,"D7383-08 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations" 2010,ASTM,"D7383-10 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations (Redline)" 2010,ASTM,"D7383-10 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations" 2007,ASTM,"D7382-07 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer" 2008,ASTM,"D7382-08 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer (Redline)" 2013,ASTM,"D7381-07(2013) Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material" 2007,ASTM,"D7381-07 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material" 2015,ASTM,"D7380-15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer (Redline)" 2015,ASTM,"D7380-15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer" 2008,ASTM,"D7380-08 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer" 2015,ASTM,"D7379/D7379M-08(2015)e1 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive" 2015,ASTM,"D7374-08(2015) Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber" 2008,ASTM,"D7374-08 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber" 2018,ASTM,"C627-18 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester" 2012,ASTM,"D7372-12 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results" 2007,ASTM,"D7372-07 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results" 2017,ASTM,"C618-17a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete" 2014,ASTM,"D7370/D7370M-14 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion" 2012,ASTM,"D737-04(2012) Standard Test Method for Air Permeability of Textile Fabrics " 2008,ASTM,"D737-04(2008)e2 Standard Test Method for Air Permeability of Textile Fabrics" 2008,ASTM,"D737-04(2008)e1 Standard Test Method for Air Permeability of Textile Fabrics" 2004,ASTM,"D737-04 Test Method for Air Permeability of Textile Fabrics" 1996,ASTM,"D737-96 Test Method for Air Permeability of Textile Fabrics" 2011,ASTM,"D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test" 2011,ASTM,"D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test (Redline)" 2009,ASTM,"D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test" 2014,ASTM,"D7367-14 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting (Redline)" 2014,ASTM,"D7367-14 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting" 2007,ASTM,"D7367-07 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting" 2012,ASTM,"D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2007,ASTM,"D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2011,ASTM,"D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration" 2014,ASTM,"D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) (Redline)" 2014,ASTM,"D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)" 2013,ASTM,"D7359-13 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)" 2008,ASTM,"D7359-08 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)" 2012,ASTM,"D7352-07(2012) Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)" 2007,ASTM,"D7352-07 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)" 2013,ASTM,"D7351-13 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications (Redline)" 2013,ASTM,"D7351-13 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications" 2007,ASTM,"D7351-07 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications" 2015,ASTM,"D7349/D7349M-15 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners (Redline)" 2015,ASTM,"D7349/D7349M-15 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners" 2014,ASTM,"D7341-14 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing (Redline)" 2014,ASTM,"D7341-14 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing" 2008,ASTM,"D7341-08 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing" 2009,ASTM,"D7341-09 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing" 2011,ASTM,"D7330-11 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales (Redline)" 2011,ASTM,"D7330-11e1 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales" 2007,ASTM,"D7330-07 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales" 2007,ASTM,"D7330-07e1 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales" 2011,ASTM,"D7330-11 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales" 2013,ASTM,"D7322-13a Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions" 2013,ASTM,"D7322-13 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions" 2007,ASTM,"D7322-07 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions" 2009,ASTM,"D732-09 Standard Test Method for Shear Strength of Plastics by Punch Tool" 2010,ASTM,"D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool" 1999,ASTM,"D732-99 Standard Test Method for Shear Strength of Plastics by Punch Tool" 2002,ASTM,"D732-02 Standard Test Method for Shear Strength of Plastics by Punch Tool" 2013,ASTM,"D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry (Redline)" 2013,ASTM,"D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry" 2007,ASTM,"D7313-07 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry" 2007,ASTM,"D7313-07a Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry" 2010,ASTM,"D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST) (Redline)" 2010,ASTM,"D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)" 2007,ASTM,"D7312-07 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)" 2011,ASTM,"D7300-11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain (Redline)" 2011,ASTM,"D7300-11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain" 2006,ASTM,"D7300-06 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain" 2012,ASTM,"D7299-12 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe (Redline)" 2012,ASTM,"D7299-12 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe" 2006,ASTM,"D7299-06 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe" 2013,ASTM,"D7281-07(2013) Standard Test Method for Determining Water Migration Resistance Through Roof Membranes" 2007,ASTM,"D7281-07 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes" 2008,ASTM,"D7277-08 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow" 2008,ASTM,"D7276-08 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow" 2007,ASTM,"D7275-07 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) (Redline)" 2012,ASTM,"D7275-07(2012) Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)" 2007,ASTM,"D7275-07 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)" 2006,ASTM,"D7275-06 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)" 2011,ASTM,"D7274-06a(2011) Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)" 2006,ASTM,"D7274-06a Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)" 2006,ASTM,"D7274-06 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)" 2011,ASTM,"D7272-06(2011) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods" 2006,ASTM,"D7272-06 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods" 2013,ASTM,"D7266-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)" 2013,ASTM,"D7266-13e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)" 2007,ASTM,"D7266-07 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)" 2007,ASTM,"D7266-07e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)" 2009,ASTM,"D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens" 2007,ASTM,"D7262-07 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids" 2010,ASTM,"D7262-10 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids (Redline)" 2010,ASTM,"D7262-10 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids" 2007,ASTM,"D7254-07 Standard Specification for Polypropylene (PP) Siding" 2011,ASTM,"D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges (Redline)" 2011,ASTM,"D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges" 2006,ASTM,"D7243-06a Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges" 2006,ASTM,"D7243-06 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges" 2013,ASTM,"D7242/D7242M-06(2013)e1 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers" 2011,ASTM,"D7240-06(2011) Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)" 2006,ASTM,"D7240-06 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)" 2013,ASTM,"D7239-13 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications (Redline)" 2013,ASTM,"D7239-13 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications" 2011,ASTM,"D7239-06(2011) Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications" 2006,ASTM,"D7239-06 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications" 2012,ASTM,"D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus" 2006,ASTM,"D7238-06 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus" 2013,ASTM,"D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor" 2008,ASTM,"D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Redline)" 2008,ASTM,"D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor" 2006,ASTM,"D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor" 2015,ASTM,"D7228-06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures" 2011,ASTM,"D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures" 2006,ASTM,"D7228-06a Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures" 2006,ASTM,"D7228-06 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures" 2013,ASTM,"D7226-13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer (Redline)" 2013,ASTM,"D7226-13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2011,ASTM,"D7226-11 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2010,ASTM,"D7226-10 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2006,ASTM,"D7226-06e1 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2006,ASTM,"D7226-06 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer" 2014,ASTM,"D7208-14 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion (Redline)" 2014,ASTM,"D7208-14 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2006,ASTM,"D7208-06 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2012,ASTM,"D7199-07(2012) Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models" 2007,ASTM,"D7199-07 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models" 2006,ASTM,"D7199-06 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models" 2012,ASTM,"D7196-12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples" 2006,ASTM,"D7196-06 Standard Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples" 2014,ASTM,"D7186-14 Standard Practice for Quality Assurance Observation of Roof Construction and Repair" 2014,ASTM,"D7186-14 Standard Practice for Quality Assurance Observation of Roof Construction and Repair (Redline)" 2012,ASTM,"D7186-12 Standard Practice for Quality Assurance Observation of Roof Construction and Repair" 2005,ASTM,"D7186-05 Standard Practice for Quality Assurance Observation of Roof Construction and Repair" 2012,ASTM,"D7185-12 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2006,ASTM,"D7185-06 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2007,ASTM,"D7185-07 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2010,ASTM,"D7185-10 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2011,ASTM,"D7185-11 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2011,ASTM,"D7185-11a Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2008,ASTM,"D7185-08 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene" 2015,ASTM,"D7184-15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection (Redline)" 2015,ASTM,"D7184-15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection" 2013,ASTM,"D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection" 2012,ASTM,"D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection" 2007,ASTM,"D7184-07 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence" 2015,ASTM,"D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" 2007,ASTM,"D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" 2007,ASTM,"D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" 2012,ASTM,"D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" 2011,ASTM,"D7181-11 Method for Consolidated Drained Triaxial Compression Test for Soils" 2013,ASTM,"D7179-07(2013) Standard Test Method for Determining Geonet Breaking Force" 2007,ASTM,"D7179-07e1 Standard Test Method for Determining Geonet Breaking Force" 2007,ASTM,"D7179-07 Standard Test Method for Determining Geonet Breaking Force" 2005,ASTM,"D7179-05 Standard Test Method for Determining Geonet Breaking Force" 2011,ASTM,"D7178-06(2011) Standard Practice for Determining the Number of Constrictions ""m"" of Non-Woven Geotextiles as a Complementary Filtration Property" 2006,ASTM,"D7178-06 Standard Practice for Determining the Number of Constrictions ""m"" of Non-Woven Geotextiles as a Complementary Filtration Property" 2015,ASTM,"D7177/D7177M-05(2015)e1 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes" 2011,ASTM,"D7176-06(2011) Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications" 2006,ASTM,"D7176-06 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications" 2015,ASTM,"D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (Redline)" 2015,ASTM,"D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer" 2005,ASTM,"D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer" 2008,ASTM,"D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer" 2007,ASTM,"D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer" 2005,ASTM,"D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer" 2011,ASTM,"D7174-05(2011) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction" 2005,ASTM,"D7174-05 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction" 2014,ASTM,"D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt (Redline)" 2014,ASTM,"D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt" 2011,ASTM,"D7173-11 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt" 2005,ASTM,"D7173-05 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt" 2014,ASTM,"D7172-14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared" 2014,ASTM,"D7172-14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Redline)" 2006,ASTM,"D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared" 2006,ASTM,"D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared" 2011,ASTM,"D7147-11 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers (Redline)" 2011,ASTM,"D7147-11 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers" 2005,ASTM,"D7147-05 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers" 1981,ASTM,"D714-56(1981)e1 Standard Method of Evaluating Degree of Blistering of Paints" 2009,ASTM,"D714-02(2009) Standard Test Method for Evaluating Degree of Blistering of Paints (Redline)" 2009,ASTM,"D714-02(2009) Standard Test Method for Evaluating Degree of Blistering of Paints" 2002,ASTM,"D714-02e1 Standard Test Method for Evaluating Degree of Blistering of Paints" 1994,ASTM,"D714-87(1994)e1 Standard Test Method for Evaluating Degree of Blistering of Paints" 2000,ASTM,"D714-87(2000) Standard Test Method for Evaluating Degree of Blistering of Paints" 2002,ASTM,"D714-02 Standard Test Method for Evaluating Degree of Blistering of Paints" 2010,ASTM,"D7128-05(2010) Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation" 2005,ASTM,"D7128-05 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation" 2011,ASTM,"D7125-11 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process" 2004,ASTM,"D7125-04 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process" 2007,ASTM,"D7125-07 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process" 2012,ASTM,"D7124-12 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2005,ASTM,"D7124-05 Standard Specification for Benzene for use with Zeolite Based Catalysts" 2006,ASTM,"D7124-06 Standard Specification for Benzene for use with Zeolite Based Catalysts" 2007,ASTM,"D7124-07 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2010,ASTM,"D7124-10 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2008,ASTM,"D7124-08 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2011,ASTM,"D7124-11 Standard Specification for Benzene for Use with Zeolite Based Catalysts" 2010,ASTM,"D7120/D7120M-10 Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application" 2015,ASTM,"D7115-10(2015) Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading" 2010,ASTM,"D7115-10 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading (Redline)" 2010,ASTM,"D7115-10 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading" 2008,ASTM,"D7115-08 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading" 2005,ASTM,"D7115-05 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading" 2015,ASTM,"D7106/D7106M-05(2015)e1 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes" 2013,ASTM,"D7105-06(2013) Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems" 2006,ASTM,"D7105-06 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems" 2013,ASTM,"D7101-13 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions" 2007,ASTM,"D7101-07 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions" 2008,ASTM,"D7101-08 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions" 2011,ASTM,"D7100-11 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions" 2006,ASTM,"D7100-06 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions" 2005,ASTM,"D7100-05 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions" 2004,ASTM,"D7100-04 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity" 2015,ASTM,"D71-94(2015)e1 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)" 2009,ASTM,"D71-94(2009) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)" 2004,ASTM,"D71-94(2004) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)" 1999,ASTM,"D71-94(1999) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)" 2010,ASTM,"D7099-04(2010) Standard Terminology Relating to Frozen Soil and Rock" 2004,ASTM,"D7099-04 Standard Terminology Relating to Frozen Soil and Rock" 2013,ASTM,"D7091-13 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals" 2012,ASTM,"D7091-12 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals" 2005,ASTM,"D7091-05 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals" 2013,ASTM,"D709-13 Standard Specification for Laminated Thermosetting Materials" 2007,ASTM,"D709-01(2007) Standard Specification for Laminated Thermosetting Materials" 2001,ASTM,"D709-01 Standard Specification for Laminated Thermosetting Materials" 2000,ASTM,"D709-00 Standard Specification for Laminated Thermosetting Materials" 2008,ASTM,"D7070-08 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature" 2004,ASTM,"D7070-04 Standard Test Method for Creep of Rock Core Under Constant Stress and Temperature" 2010,ASTM,"D7069-04(2010) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event" 2004,ASTM,"D7069-04 Standard Guide for Field Quality Assurance in a Ground-water Sampling Event" 2013,ASTM,"D7064/D7064M-08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design" 2017,ASTM,"C618-17 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete" 2013,ASTM,"D7057-13 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)" 2004,ASTM,"D7057-04 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)" 2009,ASTM,"D7057-09 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)" 2012,ASTM,"D7056-07(2012) Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams" 2007,ASTM,"D7056-07 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams" 2004,ASTM,"D7056-04 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams" 2013,ASTM,"D7051-05(2013) Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface" 2005,ASTM,"D7051-05 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface" 2004,ASTM,"D7048-04 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs" 2010,ASTM,"D7048-04(2010) Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs" 2015,ASTM,"D7047-15e1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)" 2015,ASTM,"D7047-15 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)" 2017,ASTM,"C610-17 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation" 2012,ASTM,"D7047-12 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)" 2004,ASTM,"D7047-04 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier" 2018,ASTM,"C595/C595M-18 Standard Specification for Blended Hydraulic Cements" 2004,ASTM,"D7046-04 Standard Guide for Use of the Metal Detection Method for Subsurface Investigation" 2011,ASTM,"D7046-11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration" 2010,ASTM,"D7045-04(2010) Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities" 2004,ASTM,"D7045-04 Standard Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities" 2017,ASTM,"C591-17 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation" 2007,ASTM,"D7033-07 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels" 2005,ASTM,"D7033-05 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels" 2015,ASTM,"D7032-15 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails" 2014,ASTM,"D7032-14 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2010,ASTM,"D7032-10a Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2010,ASTM,"D7032-10 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2008,ASTM,"D7032-08 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2007,ASTM,"D7032-07 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2006,ASTM,"D7032-06a Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2006,ASTM,"D7032-06 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2005,ASTM,"D7032-05a Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2005,ASTM,"D7032-05 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2004,ASTM,"D7032-04 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)" 2018,ASTM,"C578-18 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation" 2011,ASTM,"D7031-11 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products" 2004,ASTM,"D7031-04 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products" 2017,ASTM,"C578-17a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation" 2013,ASTM,"D7015-13 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils" 2007,ASTM,"D7015-07 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils" 2004,ASTM,"D7015-04 Standard Practices for Obtaining Undisturbed Block (Cubical and Cylindrical) Samples of Soils" 2010,ASTM,"D7014-10 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses" 2004,ASTM,"D7014-04 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses" 2015,ASTM,"D7013/D7013M-15 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges" 2017,ASTM,"C552-17e1 Standard Specification for Cellular Glass Thermal Insulation" 2017,ASTM,"C552-17 Standard Specification for Cellular Glass Thermal Insulation" 2014,ASTM,"D7012-14 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2013,ASTM,"D7012-13 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2007,ASTM,"D7012-07e1 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2010,ASTM,"D7012-10 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2007,ASTM,"D7012-07 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2004,ASTM,"D7012-04 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures" 2017,ASTM,"C547-17 Standard Specification for Mineral Fiber Pipe Insulation" 2015,ASTM,"D7011-15 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection" 2004,ASTM,"D7011-04 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection" 2010,ASTM,"D7011-10a Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection" 2010,ASTM,"D7011-10 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection" 2013,ASTM,"D7008-08(2013) Standard Specification for Geosynthetic Alternate Daily Covers" 2008,ASTM,"D7008-08 Standard Specification for Geosynthetic Alternate Daily Covers" 2003,ASTM,"D7008-03 Standard Specification for Geosynthetic Alternate Daily Covers" 2017,ASTM,"C533-17 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation" 2016,ASTM,"D7007-16 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials" 2015,ASTM,"D7007-15 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials" 2009,ASTM,"D7007-09 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials" 2003,ASTM,"D7007-03 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials" 2013,ASTM,"D7006-03(2013) Standard Practice for Ultrasonic Testing of Geomembranes" 2008,ASTM,"D7006-03(2008) Standard Practice for Ultrasonic Testing of Geomembranes" 2003,ASTM,"D7006-03 Standard Practice for Ultrasonic Testing of Geomembranes" 2017,ASTM,"C530-13(2017) Standard Specification for Structural Clay Nonloadbearing Screen Tile" 2016,ASTM,"D7005/D7005M-16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites" 2015,ASTM,"D7005/D7005M-15 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites This test method is under the jurisdiction of ASTM Committee D35 on Geosynthetics and is the direct responsibility of Subcommittee D35.01 on Mechanical Properties. Current edition approved July 1, 2015. Published July 2015. Originally approved in 2003. " 2013,ASTM,"D7004/D7004M-03(2013)e1 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes" 2008,ASTM,"D7004-03(2008) Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes" 2003,ASTM,"D7004-03 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes" 2013,ASTM,"D7003/D7003M-03(2013)e1 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes" 2008,ASTM,"D7003-03(2008) Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes" 2003,ASTM,"D7003-03 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes" 2018,ASTM,"C507-18 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe" 2016,ASTM,"D7002-16 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method" 2015,ASTM,"D7002-15 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method" 2010,ASTM,"D7002-10 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System" 2003,ASTM,"D7002-03 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System" 2011,ASTM,"D7001-06(2011) Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications" 2006,ASTM,"D7001-06 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications" 2005,ASTM,"D7001-05 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications" 2004,ASTM,"D7001-04 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications" 2018,ASTM,"C497-18 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile" 2011,ASTM,"D7000-11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples" 2008,ASTM,"D7000-08 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples" 2004,ASTM,"D7000-04 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples" 2009,ASTM,"D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 2009,ASTM,"D70-09 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 1997,ASTM,"D70-97 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 2008,ASTM,"D70-08 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 2003,ASTM,"D70-03 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)" 2012,ASTM,"D6999-12 Standard Practice for Miscibility of Emulsified Asphalts (Redline)" 2012,ASTM,"D6999-12 Standard Practice for Miscibility of Emulsified Asphalts" 2004,ASTM,"D6999-04 Standard Practice for Miscibility of Emulsified Asphalts" 2011,ASTM,"D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts (Redline)" 2011,ASTM,"D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts" 2004,ASTM,"D6998-04 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts" 2012,ASTM,"D6997-12 Standard Test Method for Distillation of Emulsified Asphalt" 2012,ASTM,"D6997-12 Standard Test Method for Distillation of Emulsified Asphalt (Redline)" 2004,ASTM,"D6997-04 Standard Test Method for Distillation of Emulsified Asphalt" 2013,ASTM,"D6995-05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)" 2005,ASTM,"D6995-05 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)" 2015,ASTM,"D6992-03(2015) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2009,ASTM,"D6992-03(2009) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2003,ASTM,"D6992-03 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method" 2012,ASTM,"D698-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))" 2012,ASTM,"D698-12e2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))" 2012,ASTM,"D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) (Redline)" 2012,ASTM,"D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))" 2007,ASTM,"D698-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))" 2007,ASTM,"D698-07e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))" 2000,ASTM,"D698-00ae1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))" 2008,ASTM,"D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer" 1998,ASTM,"D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer" 2008,ASTM,"D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer" 2003,ASTM,"D696-03 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer" 2014,ASTM,"D6958-03(2014) Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings" 2009,ASTM,"D6958-03(2009) Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings" 2003,ASTM,"D6958-03 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings" 2015,ASTM,"D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications" 2015,ASTM,"D695-15 Standard Test Method for Compressive Properties of Rigid Plastics (Redline)" 2015,ASTM,"D695-15 Standard Test Method for Compressive Properties of Rigid Plastics" 2008,ASTM,"D695-08 Standard Test Method for Compressive Properties of Rigid Plastics" 2010,ASTM,"D695-10 Standard Test Method for Compressive Properties of Rigid Plastics" 1996,ASTM,"D695-96 Standard Test Method for Compressive Properties of Rigid Plastics" 2002,ASTM,"D695-02a Standard Test Method for Compressive Properties of Rigid Plastics" 2002,ASTM,"D695-02 Standard Test Method for Compressive Properties of Rigid Plastics" 2016,ASTM,"D6947/D6947M-16 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System (Redline)" 2016,ASTM,"D6947/D6947M-16 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2013,ASTM,"D6947/D6947M-07(2013)e1 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2013,ASTM,"D6947-07(2013) Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2007,ASTM,"D6947-07 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System (Redline)" 2007,ASTM,"D6947-07 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2006,ASTM,"D6947-06 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System" 2013,ASTM,"D6946/D6946M-13e1 Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)" 2012,ASTM,"D6941-12 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders (Redline)" 2012,ASTM,"D6941-12 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders" 2005,ASTM,"D6941-05 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders" 2004,ASTM,"D6941-04 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders" 2003,ASTM,"D6941-03 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders" 2005,ASTM,"D6941-05e1 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders" 2010,ASTM,"D6940-10 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids (Redline)" 2010,ASTM,"D6940-10 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids" 2004,ASTM,"D6940-04 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids" 2003,ASTM,"D6940-03 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids" 2015,ASTM,"D6938-15 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2006,ASTM,"D6938-06e1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2010,ASTM,"D6938-10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2008,ASTM,"D6938-08a Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2008,ASTM,"D6938-08 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2007,ASTM,"D6938-07b Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2007,ASTM,"D6938-07a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2007,ASTM,"D6938-07 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)" 2008,ASTM,"D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt" 2004,ASTM,"D6937-04 Standard Test Method for Determining Density of Emulsified Asphalt" 2018,ASTM,"C497-18a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile" 2009,ASTM,"D6936-09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt" 2004,ASTM,"D6936-04 Standard Test Method for Determining Demulsibility of Emulsified Asphalt" 2017,ASTM,"C496/C496M-17 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens" 2011,ASTM,"D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt" 2004,ASTM,"D6935-04 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt" 2008,ASTM,"D6934-08 Standard Test Method for Residue by Evaporation of Emulsified Asphalt (Redline)" 2008,ASTM,"D6934-08 Standard Test Method for Residue by Evaporation of Emulsified Asphalt" 2004,ASTM,"D6934-04 Standard Test Method for Residue by Evaporation of Emulsified Asphalt" 2013,ASTM,"D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) (Redline)" 2013,ASTM,"D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)" 2008,ASTM,"D6933-08 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)" 2004,ASTM,"D6933-04 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)" 2013,ASTM,"D6932/D6932M-08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures" 2012,ASTM,"D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures" 2007,ASTM,"D6931-07 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures" 2010,ASTM,"D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts (Redline)" 2004,ASTM,"D6930-04 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts" 2010,ASTM,"D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts" 2004,ASTM,"D6929-04 Standard Practice for Freezing of Emulsified Asphalts" 2010,ASTM,"D6929-10 Standard Practice for Freezing of Emulsified Asphalts" 2010,ASTM,"D6928-10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2008,ASTM,"D6928-08e1 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2008,ASTM,"D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2006,ASTM,"D6928-06 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2003,ASTM,"D6928-03 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus" 2015,ASTM,"D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures" 2005,ASTM,"D6927-05e1 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures" 2006,ASTM,"D6927-06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures (Redline)" 2006,ASTM,"D6927-06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures" 2005,ASTM,"D6927-05 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures" 2004,ASTM,"D6927-04 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures" 2010,ASTM,"D6926-10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus" 2004,ASTM,"D6926-04 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus" 2009,ASTM,"D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor (Redline)" 2009,ASTM,"D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor" 2008,ASTM,"D6925-08 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor" 2007,ASTM,"D6925-07 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor" 2006,ASTM,"D6925-06 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor" 2003,ASTM,"D6925-03 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor" 2012,ASTM,"D6924-03(2012) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges" 2007,ASTM,"D6924-03(2007) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges" 2003,ASTM,"D6924-03 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges" 2015,ASTM,"D692/D692M-15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures (Redline)" 2015,ASTM,"D692/D692M-15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures" 2014,ASTM,"D692/D692M-09(2014) Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures" 2014,ASTM,"D6918-09(2014)e1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition" 2009,ASTM,"D6918-09 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition (Redline)" 2009,ASTM,"D6918-09 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition" 2007,ASTM,"D6918-03(2007) Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition" 2003,ASTM,"D6918-03 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition" 2007,ASTM,"D6917-03(2007) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)" 2003,ASTM,"D6917-03 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)" 2011,ASTM,"D6917-03(2011) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)" 2011,ASTM,"D6916-06c(2011) Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2006,ASTM,"D6916-06c Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2006,ASTM,"D6916-06b Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2006,ASTM,"D6916-06a Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2006,ASTM,"D6916-06 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2003,ASTM,"D6916-03 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)" 2004,ASTM,"D6914-04e1 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices" 2010,ASTM,"D6914-04(2010) Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices" 2004,ASTM,"D6914-04 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices" 2009,ASTM,"D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2004,ASTM,"D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2004,ASTM,"D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2009,ASTM,"D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2004,ASTM,"D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis" 2015,ASTM,"D6911-15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis" 2015,ASTM,"D6911-15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis (Redline)" 2010,ASTM,"D6911-03(2010) Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis" 2003,ASTM,"D6911-03 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis" 2013,ASTM,"D6904-03(2013) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry" 2003,ASTM,"D6904-03 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry" 2007,ASTM,"D6904-03(2007) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry" 2014,ASTM,"D6886-14 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography" 2014,ASTM,"D6886-14e1 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography" 2003,ASTM,"D6886-03 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy" 2012,ASTM,"D6886-12 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography" 2009,ASTM,"D6886-03(2009) Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy" 2015,ASTM,"D6884-03(2015)e1 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems" 2010,ASTM,"D6884-03(2010) Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems" 2003,ASTM,"D6884-03 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems" 2013,ASTM,"D6878/D6878M-13 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing" 2012,ASTM,"D6875-12 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor (Redline)" 2012,ASTM,"D6875-12 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor" 2003,ASTM,"D6875-03 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor" 2008,ASTM,"D6875-08 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor" 2012,ASTM,"D6874-12 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration (Redline)" 2012,ASTM,"D6874-12 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration" 2009,ASTM,"D6874-03(2009)e1 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration" 2003,ASTM,"D6874-03 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration" 2004,ASTM,"D6866-04 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis" 2004,ASTM,"D6866-04a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis" 2005,ASTM,"D6866-05 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis" 2006,ASTM,"D6866-06 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis" 2006,ASTM,"D6866-06a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis" 2008,ASTM,"D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2011,ASTM,"D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2012,ASTM,"D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2010,ASTM,"D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis" 2011,ASTM,"D6859-11 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings" 2005,ASTM,"D6859-05 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings" 2003,ASTM,"D6859-03 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings" 2015,ASTM,"D6841-15 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2008,ASTM,"D6841-08 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2003,ASTM,"D6841-03 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2002,ASTM,"D6841-02 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber" 2008,ASTM,"D6836-02(2008)e1 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge" 2008,ASTM,"D6836-02(2008)e2 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge" 2002,ASTM,"D6836-02 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge" 2014,ASTM,"D6826-05(2014)e1 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills" 2009,ASTM,"D6826-05(2009) Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills" 2005,ASTM,"D6826-05 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills" 2002,ASTM,"D6826-02a Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills" 2002,ASTM,"D6826-02 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills" 2014,ASTM,"D6825-14 Standard Guide for Placement of Riprap Revetments (Redline)" 2014,ASTM,"D6825-14 Standard Guide for Placement of Riprap Revetments" 2002,ASTM,"D6825-02e1 Standard Guide for Placement of Riprap Revetments" 2002,ASTM,"D6825-02e2 Standard Guide for Placement of Riprap Revetments" 2008,ASTM,"D6825-02(2008)e1 Standard Guide for Placement of Riprap Revetments" 2002,ASTM,"D6825-02 Standard Guide for Placement of Riprap Revetments" 2002,ASTM,"D6820-02 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation" 2009,ASTM,"D6818-02(2009) Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats" 2002,ASTM,"D6818-02 Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats" 2013,ASTM,"D6817/D6817M-13a Standard Specification for Rigid Cellular Polystyrene Geofoam" 2013,ASTM,"D6817-13 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2011,ASTM,"D6817-11 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2007,ASTM,"D6817-07 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2006,ASTM,"D6817-06a Standard Specification for Rigid Cellular Polystyrene Geofoam" 2006,ASTM,"D6817-06 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2004,ASTM,"D6817-04 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2002,ASTM,"D6817-02 Standard Specification for Rigid Cellular Polystyrene Geofoam" 2011,ASTM,"D6816-11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Redline)" 2011,ASTM,"D6816-11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders" 2015,ASTM,"D6815-09(2015) Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products" 2009,ASTM,"D6815-09 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products (Redline)" 2009,ASTM,"D6815-09 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products" 2002,ASTM,"D6815-02a Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products" 2002,ASTM,"D6815-02 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products" 2002,ASTM,"D6809-02 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials" 2007,ASTM,"D6809-02(2007) Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials" 2012,ASTM,"D6809-02(2012) Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials" 2008,ASTM,"D6805-02(2008) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions" 2002,ASTM,"D6805-02 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions" 2002,ASTM,"D6805-02e1 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions" 2002,ASTM,"D6796-02 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies" 2008,ASTM,"D6796-02(2008) Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies" 2013,ASTM,"D6792-13 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2002,ASTM,"D6792-02 Standard Guide for A Quality System in Petroleum Products and Lubricants Testing Laboratories" 2003,ASTM,"D6792-03 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2004,ASTM,"D6792-04 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2004,ASTM,"D6792-04a Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2005,ASTM,"D6792-05 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2006,ASTM,"D6792-06 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2007,ASTM,"D6792-07 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories" 2013,ASTM,"D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters (Redline)" 2013,ASTM,"D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters" 2005,ASTM,"D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters" 2004,ASTM,"D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters" 2002,ASTM,"D6782-02 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters" 2002,ASTM,"D6773-02 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester" 2008,ASTM,"D6773-08 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester" 2015,ASTM,"D6768/D6768M-04(2015)e2 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners" 2015,ASTM,"D6768/D6768M-04(2015)e1 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners" 2014,ASTM,"D6767-14 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test" 2011,ASTM,"D6767-11 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test" 2008,ASTM,"D6767-08 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test" 2002,ASTM,"D6767-02 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test" 2012,ASTM,"D6766-12 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions (Redline)" 2012,ASTM,"D6766-12 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions" 2009,ASTM,"D6766-09 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids" 2006,ASTM,"D6766-06a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids" 2006,ASTM,"D6766-06 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids" 2002,ASTM,"D6766-02 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids" 2013,ASTM,"D6765-13 Standard Practice for Live Staking (Redline)" 2013,ASTM,"D6765-13 Standard Practice for Live Staking" 2008,ASTM,"D6765-02(2008) Standard Practice for Live Staking" 2002,ASTM,"D6765-02 Standard Practice for Live Staking" 2014,ASTM,"D6760-14 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing" 2008,ASTM,"D6760-08 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing" 2002,ASTM,"D6760-02 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing" 2008,ASTM,"D6758-08 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method (Redline)" 2002,ASTM,"D6758-02 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method" 2013,ASTM,"D6757-07(2013) Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2007,ASTM,"D6757-07 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing (Redline)" 2007,ASTM,"D6757-07 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2005,ASTM,"D6757-05 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2004,ASTM,"D6757-04a Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing" 2004,ASTM,"D6757-04 Standard Specification for Steep-Slope Underlayment Felt Containing Inorganic Fibers" 2002,ASTM,"D6757-02 Standard Specification for Inorganic Underlayment for Use with Steep Slope Roofing Products" 2015,ASTM,"D6754/D6754M-15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing (Redline)" 2015,ASTM,"D6754/D6754M-15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing" 2015,ASTM,"D6751-15ce1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6751-15c Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6751-15b Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2014,ASTM,"D6751-14 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6751-15 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6751-15a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6751-15a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels (Redline)" 2012,ASTM,"D6751-12 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2002,ASTM,"D6751-02 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels" 2002,ASTM,"D6751-02a Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels" 2003,ASTM,"D6751-03 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels" 2003,ASTM,"D6751-03a Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels" 2006,ASTM,"D6751-06a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2006,ASTM,"D6751-06e1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2007,ASTM,"D6751-07 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2007,ASTM,"D6751-07a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2007,ASTM,"D6751-07b Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2007,ASTM,"D6751-07be1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2008,ASTM,"D6751-08 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2010,ASTM,"D6751-10 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2011,ASTM,"D6751-11 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2011,ASTM,"D6751-11a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2011,ASTM,"D6751-11b Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2009,ASTM,"D6751-09 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2009,ASTM,"D6751-09a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels" 2015,ASTM,"D6747-15 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes" 2015,ASTM,"D6747-15 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes (Redline)" 2002,ASTM,"D6747-02e1 Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane" 2012,ASTM,"D6747-12 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes" 2004,ASTM,"D6747-04 Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane" 2007,ASTM,"D6727-01(2007) Standard Guide for Conducting Borehole Geophysical Logging - Neutron" 2001,ASTM,"D6727-01 Standard Guide for Conducting Borehole Geophysical Logging-Neutron" 2015,ASTM,"D6726-15 Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Redline)" 2015,ASTM,"D6726-15 Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction" 2007,ASTM,"D6726-01(2007) Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction" 2001,ASTM,"D6726-01 Standard Guide for Conducting Borehole Geophysical Logging-Electromagnetic Induction" 2010,ASTM,"D6725-04(2010) Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers" 2004,ASTM,"D6725-04 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers" 2001,ASTM,"D6725-01 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers" 2010,ASTM,"D6724-04(2010) Standard Guide for Installation of Direct Push Groundwater Monitoring Wells" 2004,ASTM,"D6724-04 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells" 2001,ASTM,"D6724-01 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells" 2001,ASTM,"D6723-01 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)" 2012,ASTM,"D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)" 2001,ASTM,"D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes" 2009,ASTM,"D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes" 2015,ASTM,"D6711-15 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses (Redline)" 2015,ASTM,"D6711-15 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses" 2008,ASTM,"D6711-01(2008) Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses" 2001,ASTM,"D6711-01 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses" 2016,ASTM,"D6708-16 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2015,ASTM,"D6708-15 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2013,ASTM,"D6708-13e1 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2013,ASTM,"D6708-13 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2001,ASTM,"D6708-01e1 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2004,ASTM,"D6708-04 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2005,ASTM,"D6708-05 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2006,ASTM,"D6708-06 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2007,ASTM,"D6708-07 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2008,ASTM,"D6708-08 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material" 2011,ASTM,"D6707-06(2011) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications" 2006,ASTM,"D6707-06 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications" 2001,ASTM,"D6707-01 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications" 2013,ASTM,"D6706-01(2013) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil" 2007,ASTM,"D6706-01(2007) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil" 2001,ASTM,"D6706-01 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil" 2015,ASTM,"D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material" 2008,ASTM,"D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material (Redline)" 2008,ASTM,"D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material" 2001,ASTM,"D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material" 2014,ASTM,"D6703-14 Standard Test Method for Automated Heithaus Titrimetry (Redline)" 2014,ASTM,"D6703-14 Standard Test Method for Automated Heithaus Titrimetry" 2013,ASTM,"D6703-13 Standard Test Method for Automated Heithaus Titrimetry" 2007,ASTM,"D6703-07 Standard Test Method for Automated Heithaus Titrimetry" 2001,ASTM,"D6703-01 Standard Test Method for Automated Heithaus Titrimetry" 2015,ASTM,"D6694/D6694M-15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems (Redline)" 2015,ASTM,"D6694/D6694M-15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems" 2013,ASTM,"D6694/D6694M-08(2013)e1 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems" 2008,ASTM,"D6694-08 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems (Redline)" 2008,ASTM,"D6694-08 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems" 2007,ASTM,"D6694-07 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing" 2001,ASTM,"D6694-01 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing" 2015,ASTM,"D6693/D6693M-04(2015)e1 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes" 2010,ASTM,"D6693-04(2010) Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes" 2004,ASTM,"D6693-04 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes" 2003,ASTM,"D6693-03 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes" 2001,ASTM,"D6693-01 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes" 2015,ASTM,"D6690-15 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements (Redline)" 2015,ASTM,"D6690-15 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2012,ASTM,"D6690-12 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2007,ASTM,"D6690-07 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2006,ASTM,"D6690-06a Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2006,ASTM,"D6690-06 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2001,ASTM,"D6690-01 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements" 2011,ASTM,"D6689-01(2011) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization" 2006,ASTM,"D6689-01(2006) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization" 2001,ASTM,"D6689-01 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization" 2008,ASTM,"D6685-01(2008) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)" 2001,ASTM,"D6685-01 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete" 2010,ASTM,"D6684-04(2010) Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems" 2004,ASTM,"D6684-04 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems" 2001,ASTM,"D6684-01 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems" 2014,ASTM,"D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress (Redline)" 2014,ASTM,"D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress" 2008,ASTM,"D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress" 2001,ASTM,"D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids" 2008,ASTM,"D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester (Redline)" 2006,ASTM,"D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester" 2001,ASTM,"D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester" 2012,ASTM,"D668-12 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation (Redline)" 2012,ASTM,"D668-12 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation" 2004,ASTM,"D668-99(2004) Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation" 1999,ASTM,"D668-99 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation" 2013,ASTM,"D6674-01(2013) Standard Guide for Proficiency Test Program for Fabrics" 2009,ASTM,"D6674-01(2009)e1 Standard Guide for Proficiency Test Program for Fabrics" 2001,ASTM,"D6674-01 Standard Guide for Proficiency Test Program for Fabrics" 2009,ASTM,"D6674-01(2009) Standard Guide for Proficiency Test Program for Fabrics" 2013,ASTM,"D6670-13 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products (Redline)" 2013,ASTM,"D6670-13 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products" 2007,ASTM,"D6670-01(2007) Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products" 2001,ASTM,"D6670-01 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products" 2013,ASTM,"D6662-13 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2009,ASTM,"D6662-09 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2007,ASTM,"D6662-07 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2006,ASTM,"D6662-06 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2001,ASTM,"D6662-01 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards" 2017,ASTM,"C479-04(2017) Standard Specification for Vitrified Clay Liner Plates" 2008,ASTM,"D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)" 2001,ASTM,"D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)" 2011,ASTM,"D6643-01(2011) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance" 2006,ASTM,"D6643-01(2006) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance" 2001,ASTM,"D6643-01 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance" 2009,ASTM,"D664-09a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2011,ASTM,"D664-11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2018,ASTM,"C478M-18 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections (Metric)" 2011,ASTM,"D664-11 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2009,ASTM,"D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2007,ASTM,"D664-07 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2006,ASTM,"D664-06ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2006,ASTM,"D664-06a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2006,ASTM,"D664-06 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2004,ASTM,"D664-04e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2004,ASTM,"D664-04 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2001,ASTM,"D664-01 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2001,ASTM,"D664-95(2001)e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 1995,ASTM,"D664-95 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration" 2001,ASTM,"D6639-01 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations" 2001,ASTM,"D6638-01 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)" 2011,ASTM,"D6638-11 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) (Redline)" 2011,ASTM,"D6638-11 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)" 2007,ASTM,"D6638-07 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)" 2006,ASTM,"D6638-06 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)" 2015,ASTM,"D6637/D6637M-15 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method (Redline)" 2015,ASTM,"D6637/D6637M-15 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method" 2011,ASTM,"D6637-11 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method (Redline)" 2009,ASTM,"D6637-01(2009) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method" 2010,ASTM,"D6637-10 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method" 2001,ASTM,"D6637-01 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method" 2011,ASTM,"D6637-11 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method" 2011,ASTM,"D6636-01(2011) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes" 2006,ASTM,"D6636-01(2006) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes" 2001,ASTM,"D6636-01 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes" 2015,ASTM,"D6635-15 Standard Test Method for Performing the Flat Plate Dilatometer (Redline)" 2015,ASTM,"D6635-15 Standard Test Method for Performing the Flat Plate Dilatometer" 2007,ASTM,"D6635-01(2007) Standard Test Method for Performing the Flat Plate Dilatometer" 2001,ASTM,"D6635-01 Standard Test Method for Performing the Flat Plate Dilatometer" 2014,ASTM,"D6634/D6634M-14 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells" 2011,ASTM,"D6631-05(2011) Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method (Redline)" 2011,ASTM,"D6631-05(2011) Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method" 2001,ASTM,"D6631-01 Standard Guide for Committee D01 for Conducting an Interlaboratory Study, and Determining the Precision of a Test Method" 2005,ASTM,"D6631-05 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method" 2008,ASTM,"D6630-08 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance (Redline)" 2008,ASTM,"D6630-08 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance" 2001,ASTM,"D6630-01 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance" 2012,ASTM,"D6629-01(2012)e1 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion" 2007,ASTM,"D6629-01(2007) Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion" 2001,ASTM,"D6629-01 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion" 2015,ASTM,"D6628-03(2015) Standard Specification for Color of Pavement Marking Materials" 2010,ASTM,"D6628-03(2010)e1 Standard Specification for Color of Pavement Marking Materials" 2003,ASTM,"D6628-03 Standard Specification for Color of Pavement Marking Materials" 2001,ASTM,"D6628-01 Standard Specification for Color of Pavement Marking Materials" 2015,ASTM,"D6626-15 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder (Redline)" 2015,ASTM,"D6626-15 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder" 2009,ASTM,"D6626-09 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder" 2001,ASTM,"D6626-01 Standard Specification for Graded Trinidad Lake Modified Asphalt Binder" 2009,ASTM,"D6622-01(2009) Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems" 2001,ASTM,"D6622-01 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems" 2012,ASTM,"D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials" 2000,ASTM,"D6621-00 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials" 2006,ASTM,"D6621-00(2006) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials" 2006,ASTM,"D6621-00(2006)e1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials" 2013,ASTM,"D6617-13 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material" 2000,ASTM,"D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material" 2005,ASTM,"D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material" 2008,ASTM,"D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material" 2012,ASTM,"D6608-12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes (Redline)" 2012,ASTM,"D6608-12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes" 2006,ASTM,"D6608-00(2006) Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes" 2000,ASTM,"D6608-00 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes" 2015,ASTM,"D6607-00(2015) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits" 2009,ASTM,"D6607-00(2009) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits" 2005,ASTM,"D6607-00(2005) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits" 2000,ASTM,"D6607-00 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits" 2013,ASTM,"D6600-00(2013) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2000,ASTM,"D6600-00 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2004,ASTM,"D6600-00(2004) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2000,ASTM,"D6600-00e2 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2009,ASTM,"D6600-00(2009) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods" 2014,ASTM,"D6599-00(2014)e1 Standard Practice for Construction of Live Fascines on Slopes" 2014,ASTM,"D6599-00(2014) Standard Practice for Construction of Live Fascines on Slopes" 2000,ASTM,"D6599-00 Standard Practice for Construction of Live Fascines on Slopes" 2008,ASTM,"D6599-00(2008) Standard Practice for Construction of Live Fascines on Slopes" 2007,ASTM,"D6598-07 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations" 2011,ASTM,"D6598-11 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations (Redline)" 2011,ASTM,"D6598-11 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations" 2000,ASTM,"D6598-00 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations" 2014,ASTM,"D6575-14a Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) (Redline)" 2014,ASTM,"D6575-14a Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)" 2014,ASTM,"D6575-14 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)" 2006,ASTM,"D6575-00(2006) Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)" 2000,ASTM,"D6575-00 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM's)" 2013,ASTM,"D6574/D6574M-13e1 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow" 2013,ASTM,"D6572-13e1 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2013,ASTM,"D6572-13 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2012,ASTM,"D6572-12 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test (Redline)" 2012,ASTM,"D6572-12 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2006,ASTM,"D6572-06 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2000,ASTM,"D6572-00 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test" 2004,ASTM,"D6570-04e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber" 2010,ASTM,"D6570-04(2010) Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber" 2004,ASTM,"D6570-04 Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber" 2000,ASTM,"D6570-00a Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber" 2014,ASTM,"D6567-14 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)" 2006,ASTM,"D6567-00(2006) Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)" 2000,ASTM,"D6567-00 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)" 2012,ASTM,"D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats" 2006,ASTM,"D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats" 2000,ASTM,"D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats" 2012,ASTM,"D6564-00(2012)e1 Standard Guide for Field Filtration of Groundwater Samples" 2005,ASTM,"D6564-00(2005) Standard Guide for Field Filtration of Groundwater Samples" 2000,ASTM,"D6564-00 Standard Guide for Field Filtration of Ground-Water Samples" 2012,ASTM,"D6563-12 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography (Redline)" 2018,ASTM,"C478-18 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections" 2000,ASTM,"D6563-00 Test Method for Benzene, Toluene, Xylene, (BTX) Concentrates Analysis by Capillary Column Gas Chromatography" 2005,ASTM,"D6563-05 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography" 2010,ASTM,"D6563-05(2010)e1 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography" 2005,ASTM,"D6563-05e1 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography" 2011,ASTM,"D6563-11 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography" 2011,ASTM,"D6563-11a Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography" 2014,ASTM,"D6555-03(2014) Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies" 2008,ASTM,"D6555-03(2008) Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies" 2003,ASTM,"D6555-03 Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies" 2000,ASTM,"D6555-00a Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies" 2013,ASTM,"D6539-13 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air " 2006,ASTM,"D6539-00(2006)e1 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air" 2006,ASTM,"D6539-00(2006)e2 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air" 2006,ASTM,"D6539-00(2006) Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air" 2000,ASTM,"D6539-00 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air" 2014,ASTM,"D6532-00(2014) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens" 2000,ASTM,"D6532-00 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens" 2006,ASTM,"D6532-00(2006) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens" 2014,ASTM,"D653-14 Standard Terminology Relating to Soil, Rock, and Contained Fluids (Redline)" 2014,ASTM,"D653-14 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2011,ASTM,"D653-11 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2000,ASTM,"D653-97(2000) Standard Terminology Relating to Soil, Rock, and Contained Fluids" 1997,ASTM,"D653-97 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2009,ASTM,"D653-09 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2008,ASTM,"D653-08a Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2008,ASTM,"D653-08 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07f Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07e Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07d Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07c Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07b Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D653-07 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2006,ASTM,"D653-06 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2005,ASTM,"D653-05 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2004,ASTM,"D653-04 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2003,ASTM,"D653-03 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2002,ASTM,"D653-02a Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2002,ASTM,"D653-02 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2001,ASTM,"D653-01 Standard Terminology Relating to Soil, Rock, and Contained Fluids" 2007,ASTM,"D6528-07 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils (Redline)" 2000,ASTM,"D6528-00 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils" 2000,ASTM,"D6527-00 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation" 2000,ASTM,"D6526-00 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography" 2003,ASTM,"D6526-03 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography" 2003,ASTM,"D6526-03e1 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography" 2018,ASTM,"C476-18 Standard Specification for Grout for Masonry" 2010,ASTM,"D6526-10 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography" 2012,ASTM,"D6526-12 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography (Redline)" 2014,ASTM,"D6525/D6525M-14 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products" 2011,ASTM,"D6524-00(2011) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)" 2006,ASTM,"D6524-00(2006) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)" 2000,ASTM,"D6524-00 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)" 2014,ASTM,"D6523-00(2014)e1 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills" 2009,ASTM,"D6523-00(2009) Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills" 2005,ASTM,"D6523-00(2005) Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills" 2000,ASTM,"D6523-00 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills" 2013,ASTM,"D6521-13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) (Redline)" 2013,ASTM,"D6521-13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2008,ASTM,"D6521-08 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2005,ASTM,"D6521-05 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2004,ASTM,"D6521-04 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2003,ASTM,"D6521-03a Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2000,ASTM,"D6521-00 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)" 2015,ASTM,"D6519-15 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler (Redline)" 2015,ASTM,"D6519-15 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler" 2008,ASTM,"D6519-08 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler" 2005,ASTM,"D6519-05 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler" 2002,ASTM,"D6519-02 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler" 2000,ASTM,"D6519-00 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler" 2012,ASTM,"D6517-00(2012)e1 Standard Guide for Field Preservation of Groundwater Samples" 2005,ASTM,"D6517-00(2005) Standard Guide for Field Preservation of Groundwater Samples" 2000,ASTM,"D6517-00 Standard Guide for Field Preservation of Ground-Water Samples" 2014,ASTM,"D6513-14 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests" 2014,ASTM,"D6513-14 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests (Redline)" 2008,ASTM,"D6513-08 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests" 2005,ASTM,"D6513-00(2005) Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests" 2000,ASTM,"D6513-00 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests" 2014,ASTM,"D6512-07(2014) Standard Practice for Interlaboratory Quantitation Estimate" 2007,ASTM,"D6512-07 Standard Practice for Interlaboratory Quantitation Estimate (Redline)" 2007,ASTM,"D6512-07 Standard Practice for Interlaboratory Quantitation Estimate" 2003,ASTM,"D6512-03 Standard Practice for Interlaboratory Quantitation Estimate" 2000,ASTM,"D6512-00 Standard Practice for Interlaboratory Quantitation Estimate" 2009,ASTM,"D6506-01(2009) Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing (Redline)" 2009,ASTM,"D6506-01(2009) Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing" 2001,ASTM,"D6506-01 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing" 2015,ASTM,"D6497/D6497M-02(2015)e1 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures" 2015,ASTM,"D6496/D6496M-04A(2015)e1 Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners" 2015,ASTM,"D6495/D6495M-15 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners (Redline)" 2015,ASTM,"D6495/D6495M-15 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners" 2007,ASTM,"D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Redline)" 2006,ASTM,"D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 2004,ASTM,"D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 2001,ASTM,"D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 2000,ASTM,"D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position" 2015,ASTM,"D6473-15 Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control (Redline)" 2015,ASTM,"D6473-15 Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control" 1999,ASTM,"D6473-99 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control" 2010,ASTM,"D6473-10 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control" 2005,ASTM,"D6473-99(2005) Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control" 2013,ASTM,"D6467-13 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils (Redline)" 2013,ASTM,"D6467-13 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils" 1999,ASTM,"D6467-99 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils" 2006,ASTM,"D6467-06 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils" 2006,ASTM,"D6467-06a Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils" 1999,ASTM,"D6462-99 Standard Practice for Silt Fence Installation" 2003,ASTM,"D6462-03 Standard Practice for Silt Fence Installation" 2008,ASTM,"D6462-03(2008) Standard Practice for Silt Fence Installation (Redline)" 2007,ASTM,"D6461-99(2007)e1 Standard Specification for Silt Fence Materials" 1999,ASTM,"D6461-99 Standard Specification for Silt Fence Materials" 2012,ASTM,"D6460-12 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2000,ASTM,"D6460-00 Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2012,ASTM,"D6460-12 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion (Redline)" 1999,ASTM,"D6460-99 Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2007,ASTM,"D6460-07 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion" 2015,ASTM,"D6459-15 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion (Redline)" 2015,ASTM,"D6459-15 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion" 1999,ASTM,"D6459-99 Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Hillslopes from Rainfall-Induced Erosion" 2011,ASTM,"D6459-11 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion" 2007,ASTM,"D6459-07 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion" 2011,ASTM,"D6455-11 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM) (Redline)" 1999,ASTM,"D6455-99 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)" 2005,ASTM,"D6455-05 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)" 2011,ASTM,"D6455-11 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)" 2011,ASTM,"D6454-99(2011) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)" 2006,ASTM,"D6454-99(2006) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)" 1999,ASTM,"D6454-99 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)" 2012,ASTM,"D6452-99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations" 2005,ASTM,"D6452-99(2005) Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations" 1999,ASTM,"D6452-99 Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations" 2008,ASTM,"D6449-99(2008) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)" 1999,ASTM,"D6449-99 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)" 2012,ASTM,"D6434-12 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes (Redline)" 2012,ASTM,"D6434-12 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes" 1999,ASTM,"D6434-99 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes" 2004,ASTM,"D6434-04 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes" 2011,ASTM,"D6433-11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 2009,ASTM,"D6433-09 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 1999,ASTM,"D6433-99 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 2007,ASTM,"D6433-07 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 2003,ASTM,"D6433-03 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys" 2011,ASTM,"D6432-11 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation (Redline)" 2011,ASTM,"D6432-11 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation" 2005,ASTM,"D6432-99(2005) Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation" 1999,ASTM,"D6432-99 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation" 2010,ASTM,"D6431-99(2010) Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation" 2005,ASTM,"D6431-99(2005) Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation" 1999,ASTM,"D6431-99 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation" 2010,ASTM,"D6430-99(2010) Standard Guide for Using the Gravity Method for Subsurface Investigation" 2005,ASTM,"D6430-99(2005) Standard Guide for Using the Gravity Method for Subsurface Investigation" 1999,ASTM,"D6430-99 Standard Guide for Using the Gravity Method for Subsurface Investigation" 2011,ASTM,"D6429-99(2011)e1 Standard Guide for Selecting Surface Geophysical Methods" 2006,ASTM,"D6429-99(2006) Standard Guide for Selecting Surface Geophysical Methods" 1999,ASTM,"D6429-99 Standard Guide for Selecting Surface Geophysical Methods" 1999,ASTM,"D6400-99e1 Standard Specification for Compostable Plastics" 2012,ASTM,"D6400-12 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities (Redline)" 2012,ASTM,"D6400-12 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities" 2004,ASTM,"D6400-04 Standard Specification for Compostable Plastics" 2014,ASTM,"D6393-14 Standard Test Method for Bulk Solids Characterization by Carr Indices" 2014,ASTM,"D6393-14 Standard Test Method for Bulk Solids Characterization by Carr Indices (Redline)" 2006,ASTM,"D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices" 1999,ASTM,"D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices" 2008,ASTM,"D6393-08 Standard Test Method for Bulk Solids Characterization by Carr Indices" 2012,ASTM,"D6392-12 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods (Redline)" 2012,ASTM,"D6392-12 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods" 2006,ASTM,"D6392-99(2006) Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods" 1999,ASTM,"D6392-99 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods" 2008,ASTM,"D6392-08 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods" 2011,ASTM,"D6391-11 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration" 2011,ASTM,"D6391-11 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration (Redline)" 2004,ASTM,"D6391-99(2004) Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole" 1999,ASTM,"D6391-99 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole" 2006,ASTM,"D6391-06 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole" 2011,ASTM,"D6390-11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures (Redline)" 2011,ASTM,"D6390-11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures" 2010,ASTM,"D6390-05(2010) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures" 1999,ASTM,"D6390-99 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures" 2005,ASTM,"D6390-05 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures" 2012,ASTM,"D6389-99(2012) Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids" 2005,ASTM,"D6389-99(2005) Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids" 1999,ASTM,"D6389-99 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids" 2012,ASTM,"D6388-99(2012) Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids" 2005,ASTM,"D6388-99(2005) Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids" 1999,ASTM,"D6388-99 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids" 2015,ASTM,"D6383/D6383M-99(2015) Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material" 2013,ASTM,"D6381/D6381M-08(2013)e1 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance" 2015,ASTM,"D6381/D6381M-15 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance (Redline)" 2015,ASTM,"D6381/D6381M-15 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance" 2008,ASTM,"D6381-08 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance (Redline)" 2008,ASTM,"D6381-08 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance" 2003,ASTM,"D6381-03b Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance" 2003,ASTM,"D6381-03a Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance" 2003,ASTM,"D6381-03 Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance" 2000,ASTM,"D6381-00a Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance" 2000,ASTM,"D6381-00 Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance" 2013,ASTM,"D6380/D6380M-03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2001,ASTM,"D6380-01e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2009,ASTM,"D6380-03(2009) Standard Specification for Asphalt Roll Roofing (Organic Felt) (Redline)" 2009,ASTM,"D6380-03(2009) Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2003,ASTM,"D6380-03 Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2001,ASTM,"D6380-01 Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2000,ASTM,"D6380-00 Standard Specification for Asphalt Roll Roofing (Organic Felt)" 2010,ASTM,"D638-10 Standard Test Method for Tensile Properties of Plastics (Redline)" 2010,ASTM,"D638-10 Standard Test Method for Tensile Properties of Plastics" 1999,ASTM,"D638-99 Standard Test Method for Tensile Properties of Plastics" 2008,ASTM,"D638-08 Standard Test Method for Tensile Properties of Plastics" 2003,ASTM,"D638-03 Standard Test Method for Tensile Properties of Plastics" 2002,ASTM,"D638-02a Standard Test Method for Tensile Properties of Plastics" 2002,ASTM,"D638-02 Standard Test Method for Tensile Properties of Plastics" 2001,ASTM,"D638-01 Standard Test Method for Tensile Properties of Plastics" 2000,ASTM,"D638-00 Standard Test Method for Tensile Properties of Plastics" 2013,ASTM,"D6373-13 Standard Specification for Performance Graded Asphalt Binder" 2007,ASTM,"D6373-07e1 Standard Specification for Performance Graded Asphalt Binder" 1999,ASTM,"D6373-99 Standard Specification for Performance Graded Asphalt Binder" 2007,ASTM,"D6373-07 Standard Specification for Performance Graded Asphalt Binder" 2015,ASTM,"D6372-15 Standard Practice for Design, Testing, and Construction of Microsurfacing (Redline)" 2015,ASTM,"D6372-15 Standard Practice for Design, Testing, and Construction of Microsurfacing" 2010,ASTM,"D6372-05(2010) Standard Practice for Design, Testing, and Construction of Micro-Surfacing" 1999,ASTM,"D6372-99a Standard Practice for Design, Testing, and Construction of Micro-Surfacing" 2005,ASTM,"D6372-05 Standard Practice for Design, Testing, and Construction of Micro-Surfacing" 2014,ASTM,"D6370-99(2014) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)" 1999,ASTM,"D6370-99 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)" 2003,ASTM,"D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)" 2009,ASTM,"D6370-99(2009) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)" 2012,ASTM,"D6367-12 Standard Specification for AMS (α-Methylstyrene)" 1999,ASTM,"D6367-99 Standard Specification for AMS (alpha-Methylstyrene)" 2008,ASTM,"D6367-04(2008) Standard Specification for AMS (α-Methylstyrene)" 2004,ASTM,"D6367-04 Standard Specification for AMS (alpha-Methylstyrene)" 2006,ASTM,"D6365-99(2006) Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test" 1999,ASTM,"D6365-99 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test" 2011,ASTM,"D6365-99(2011) Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test" 2011,ASTM,"D6364-06(2011) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics" 2004,ASTM,"D6364-99(2004) Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics" 1999,ASTM,"D6364-99 Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics" 2006,ASTM,"D6364-06 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics" 2014,ASTM,"D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2014,ASTM,"D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position (Redline)" 1997,ASTM,"D635-97 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2010,ASTM,"D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 1998,ASTM,"D635-98 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2006,ASTM,"D635-06 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2003,ASTM,"D635-03 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position" 2004,ASTM,"D6345-98(2004)e1 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air" 2010,ASTM,"D6345-10 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air (Redline)" 2010,ASTM,"D6345-10 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air" 2003,ASTM,"D6345-98(2003) Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air" 1998,ASTM,"D6345-98 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air" 2014,ASTM,"D6330-98(2014) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions" 2008,ASTM,"D6330-98(2008) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions" 2003,ASTM,"D6330-98(2003) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions" 1998,ASTM,"D6330-98 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions" 2011,ASTM,"D633-11 Standard Volume Correction Table for Road Tar (Redline)" 2011,ASTM,"D633-11 Standard Volume Correction Table for Road Tar" 2005,ASTM,"D633-97(2005) Standard Volume Correction Table for Road Tar" 2001,ASTM,"D633-97(2001) Standard Volume Correction Table for Road Tar" 1997,ASTM,"D633-97 Standard Volume Correction Table for Road Tar" 2015,ASTM,"D6329-98(2015) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers" 2008,ASTM,"D6329-98(2008) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers" 2003,ASTM,"D6329-98(2003) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers" 1998,ASTM,"D6329-98 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers" 2012,ASTM,"D632-12 Standard Specification for Sodium Chloride" 1999,ASTM,"D632-99 Standard Specification for Sodium Chloride" 2000,ASTM,"D632-00 Standard Specification for Sodium Chloride" 2012,ASTM,"D6312-98(2012)e1 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs" 2005,ASTM,"D6312-98(2005) Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs" 1998,ASTM,"D6312-98 Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs" 2010,ASTM,"D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method" 2010,ASTM,"D6307-05(2010) Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method" 1998,ASTM,"D6307-98 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method" 2005,ASTM,"D6307-05 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method" 2004,ASTM,"D6307-04 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method" 2015,ASTM,"D6305-08(2015)e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 1998,ASTM,"D6305-98e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 2002,ASTM,"D6305-02e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 2008,ASTM,"D6305-08 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing (Redline)" 2008,ASTM,"D6305-08 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 2002,ASTM,"D6305-02 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing" 2014,ASTM,"D6300-14 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2013,ASTM,"D6300-13a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2015,ASTM,"D6300-15 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2014,ASTM,"D6300-14a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2013,ASTM,"D6300-13 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2014,ASTM,"D6300-14ae1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2002,ASTM,"D6300-02 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2003,ASTM,"D6300-03 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2004,ASTM,"D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2006,ASTM,"D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2007,ASTM,"D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2008,ASTM,"D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants" 2016,ASTM,"D6299-16 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2013,ASTM,"D6299-13e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2013,ASTM,"D6299-13 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2010,ASTM,"D6299-10e2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2000,ASTM,"D6299-00 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance" 2002,ASTM,"D6299-02 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance" 2002,ASTM,"D6299-02e1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance" 2007,ASTM,"D6299-07 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2007,ASTM,"D6299-07e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2008,ASTM,"D6299-08 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2009,ASTM,"D6299-09 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2010,ASTM,"D6299-10e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2010,ASTM,"D6299-10 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance" 2013,ASTM,"D6298-13 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface (Redline)" 2013,ASTM,"D6298-13 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface" 2005,ASTM,"D6298-05e1 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface" 2005,ASTM,"D6298-05 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface" 2000,ASTM,"D6298-00 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheet with a Factory Applied Metal Surface" 2013,ASTM,"D6297-13 Standard Specification for Asphaltic Plug Joints for Bridges (Redline)" 2013,ASTM,"D6297-13 Standard Specification for Asphaltic Plug Joints for Bridges" 1998,ASTM,"D6297-98 Standard Specification for Asphaltic Plug Joints for Bridges" 2007,ASTM,"D6297-01(2007) Standard Specification for Asphaltic Plug Joints for Bridges" 2001,ASTM,"D6297-01 Standard Specification for Asphaltic Plug Joints for Bridges" 2012,ASTM,"D6286-12 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization (Redline)" 2012,ASTM,"D6286-12 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization" 2006,ASTM,"D6286-98(2006) Standard Guide for Selection of Drilling Methods for Environmental Site Characterization" 1998,ASTM,"D6286-98 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization" 2012,ASTM,"D6285-99(2012)e1 Standard Guide for Locating Abandoned Wells" 2005,ASTM,"D6285-99(2005) Standard Guide for Locating Abandoned Wells" 1999,ASTM,"D6285-99 Standard Guide for Locating Abandoned Wells" 2014,ASTM,"D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations" 2010,ASTM,"D6274-10 Standard Guide for Conducting Borehole Geophysical Logging - Gamma" 2004,ASTM,"D6274-98(2004) Standard Guide for Conducting Borehole Geophysical Logging-Gamma" 1998,ASTM,"D6274-98 Standard Guide for Conducting Borehole Geophysical Logging-Gamma" 2012,ASTM,"D6270-08(2012) Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 2008,ASTM,"D6270-08e1 Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 2004,ASTM,"D6270-98(2004) Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 1998,ASTM,"D6270-98 Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 2008,ASTM,"D6270-08 Standard Practice for Use of Scrap Tires in Civil Engineering Applications" 2014,ASTM,"D6261-14 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) (Redline)" 2014,ASTM,"D6261-14 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)" 2013,ASTM,"D6261-13 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)" 1998,ASTM,"D6261-98 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)" 2003,ASTM,"D6261-98(2003) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)" 2010,ASTM,"D6261-10 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)" 2015,ASTM,"D6259-15 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method (Redline)" 2015,ASTM,"D6259-15 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method" 1998,ASTM,"D6259-98 Standard Practice for Determination of a Pooled Limit of Quantitation" 2004,ASTM,"D6259-98(2004) Standard Practice for Determination of a Pooled Limit of Quantitation" 2010,ASTM,"D6259-98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation" 2011,ASTM,"D6249-06(2011) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals (Redline)" 2011,ASTM,"D6249-06(2011) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals" 2004,ASTM,"D6249-98(2004) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals" 1998,ASTM,"D6249-98 Standard Guide for Aklaline Stabilization of Wastewater Treatment Plant Residuals" 2006,ASTM,"D6249-06 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals" 2012,ASTM,"D6245-12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation" 2012,ASTM,"D6245-12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation (Redline)" 2002,ASTM,"D6245-98(2002) Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation" 1998,ASTM,"D6245-98 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation" 2007,ASTM,"D6245-07 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation" 2011,ASTM,"D6244-06(2011) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains" 2004,ASTM,"D6244-98(2004) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains" 1998,ASTM,"D6244-98 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains" 2006,ASTM,"D6244-06 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains" 2016,ASTM,"D6243/D6243M-16 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method (Redline)" 2016,ASTM,"D6243/D6243M-16 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method" 2009,ASTM,"D6241-04(2009)e1 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe" 2014,ASTM,"D6241-14 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe (Redline)" 2014,ASTM,"D6241-14 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe" 2009,ASTM,"D6241-04(2009) Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe" 1999,ASTM,"D6241-99 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe" 2004,ASTM,"D6241-04 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe" 2012,ASTM,"D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers " 2000,ASTM,"D624-00e1 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers" 2007,ASTM,"D624-00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers" 2000,ASTM,"D624-00 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers" 2015,ASTM,"D6237-09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)" 1998,ASTM,"D6237-98 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)" 2003,ASTM,"D6237-03 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)" 2009,ASTM,"D6237-09 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) (Redline)" 2009,ASTM,"D6237-09 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)" 2011,ASTM,"D6236-11 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil (Redline)" 2011,ASTM,"D6236-11 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil" 2004,ASTM,"D6236-98(2004) Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil" 1998,ASTM,"D6236-98 Standard Guide for Coring and Logging Cement- or Lime-Stabilized Soil" 2010,ASTM,"D6235-04(2010) Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites" 1998,ASTM,"D6235-98a Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites" 2004,ASTM,"D6235-04 Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites" 2013,ASTM,"D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers (Redline)" 2013,ASTM,"D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers" 2005,ASTM,"D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers" 1998,ASTM,"D6230-98 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers" 1998,ASTM,"D6228-98 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection" 2010,ASTM,"D6228-10 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection (Redline)" 2010,ASTM,"D6228-10 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection" 2003,ASTM,"D6228-98(2003) Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection" 2015,ASTM,"D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics (Redline)" 2015,ASTM,"D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics" 1998,ASTM,"D6226-98e1 Standard Test Method for Open Cell Content of Rigid Cellular Plastics" 2005,ASTM,"D6226-05 Standard Test Method for Open Cell Content of Rigid Cellular Plastics" 2010,ASTM,"D6226-10 Standard Test Method for Open Cell Content of Rigid Cellular Plastics" 2006,ASTM,"D6221-00(2006) Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing (Redline)" 2006,ASTM,"D6221-00(2006) Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing" 2000,ASTM,"D6221-00 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing" 2012,ASTM,"D622-99(2012) Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System" 2005,ASTM,"D622-99(2005) Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System" 1999,ASTM,"D622-99 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System" 2009,ASTM,"D6213-97(2009) Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids" 2003,ASTM,"D6213-97(2003) Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids" 1997,ASTM,"D6213-97 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids" 2014,ASTM,"D619-14 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation" 1999,ASTM,"D619-99 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation" 2010,ASTM,"D6187-97(2010) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence" 2003,ASTM,"D6187-97(2003) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence" 1997,ASTM,"D6187-97 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence" 2013,ASTM,"D618-13 Standard Practice for Conditioning Plastics for Testing" 2008,ASTM,"D618-08 Standard Practice for Conditioning Plastics for Testing" 2005,ASTM,"D618-05 Standard Practice for Conditioning Plastics for Testing" 2000,ASTM,"D618-00 Standard Practice for Conditioning Plastics for Testing" 1997,ASTM,"D6171-97e1 Standard Guide for Documenting a Ground-Water Modeling Code" 2010,ASTM,"D6171-97(2010) Standard Guide for Documenting a Groundwater Modeling Code" 2004,ASTM,"D6171-97(2004) Standard Guide for Documenting a Ground-Water Modeling Code" 1997,ASTM,"D6170-97e1 Standard Guide for Selecting a Ground-Water Modeling Code" 2010,ASTM,"D6170-97(2010) Standard Guide for Selecting a Groundwater Modeling Code" 2004,ASTM,"D6170-97(2004) Standard Guide for Selecting a Ground-Water Modeling Code" 2013,ASTM,"D6169/D6169M-13 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations" 1997,ASTM,"D6168-97e1 Standard Guide for Selection of the Minimum Set of Data Elements Required to Identify Locations Chosen for the Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids" 2010,ASTM,"D6168-97(2010) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids" 2004,ASTM,"D6168-97(2004) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids" 1997,ASTM,"D6167-97e1 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper" 2011,ASTM,"D6167-11 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper" 2004,ASTM,"D6167-97(2004) Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper" 2015,ASTM,"D6163/D6163M-00(2015)e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2000,ASTM,"D6163-00e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2000,ASTM,"D6163-00e2 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2008,ASTM,"D6163-00(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2000,ASTM,"D6163-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements" 2015,ASTM,"D6162/D6162M-00A(2015)e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2000,ASTM,"D6162-00ae1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2008,ASTM,"D6162-00a(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2000,ASTM,"D6162-00a Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements" 2015,ASTM,"D6155-15 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures" 2013,ASTM,"D6155-13 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures" 1997,ASTM,"D6155-97 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures" 2006,ASTM,"D6155-06 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures" 2001,ASTM,"D6155-01 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures" 2014,ASTM,"D6154-09(2014) Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction" 2015,ASTM,"D6154-15 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction" 2009,ASTM,"D6154-09 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction" 1997,ASTM,"D6154-97 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction" 2004,ASTM,"D6154-04 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction" 2015,ASTM,"D6153-15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems" 2007,ASTM,"D6153-97(2007) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems" 2003,ASTM,"D6153-97(2003) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems" 1997,ASTM,"D6153-97 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems" 2015,ASTM,"D6151/D6151M-15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Redline)" 2015,ASTM,"D6151/D6151M-15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling" 2013,ASTM,"D6144-13 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography" 2012,ASTM,"D6144-12 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography" 1997,ASTM,"D6144-97 Standard Test Method for Analysis of AMS (alpha-Methylstyrene) by Capillary Gas Chromatography" 2004,ASTM,"D6144-04 Standard Test Method for Analysis of AMS (alpha-Methylstyrene) by Capillary Gas Chromatography" 2008,ASTM,"D6144-08 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography" 2013,ASTM,"D6143-13 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)" 1997,ASTM,"D6143-97 Standard Test Method for Iron Content of Bisphenol A (4,4´ - Isopropylidenediphenol)" 2009,ASTM,"D6143-09 Standard Test Method for Iron Content of Bisphenol A (4,4´ - Isopropylidenediphenol)" 2005,ASTM,"D6143-05 Standard Test Method for Iron Content of Bisphenol A (4,4´ - Isopropylidenediphenol)" 2012,ASTM,"D6142-12 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography" 1997,ASTM,"D6142-97 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography" 2003,ASTM,"D6142-03 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography" 2008,ASTM,"D6142-08 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography" 2014,ASTM,"D6141-14 Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids" 2009,ASTM,"D6141-09 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids" 2004,ASTM,"D6141-97(2004) Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids" 1997,ASTM,"D6141-97 Standard Guide for Screening the Clay Portion of a Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids" 2014,ASTM,"D6140-00(2014) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications" 2009,ASTM,"D6140-00(2009) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications" 1997,ASTM,"D6140-97 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications" 2005,ASTM,"D6140-00(2005) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications" 2000,ASTM,"D6140-00 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications" 1997,ASTM,"D6135-97 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing" 2013,ASTM,"D6134-07(2013) Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems" 2006,ASTM,"D6134-97(2006) Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems" 1997,ASTM,"D6134-97 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems" 2007,ASTM,"D6134-07 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems" 2014,ASTM,"D6128-14 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell" 1997,ASTM,"D6128-97 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell" 2006,ASTM,"D6128-06 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell" 2000,ASTM,"D6128-00 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell" 2013,ASTM,"D6117-13e1 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes" 2013,ASTM,"D6117-13 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes" 2010,ASTM,"D6117-10 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes" 1997,ASTM,"D6117-97 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes" 2005,ASTM,"D6117-97(2005) Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes" 2013,ASTM,"D6112-13 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes" 2010,ASTM,"D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes" 1997,ASTM,"D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes" 2005,ASTM,"D6112-97(2005) Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes" 2013,ASTM,"D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement" 2013,ASTM,"D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement" 2009,ASTM,"D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement" 1997,ASTM,"D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement" 2003,ASTM,"D6111-03 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement" 2004,ASTM,"D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2004,ASTM,"D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2010,ASTM,"D6110-10 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 1997,ASTM,"D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2008,ASTM,"D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2006,ASTM,"D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2005,ASTM,"D6110-05a Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2005,ASTM,"D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2002,ASTM,"D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics" 2012,ASTM,"D611-12 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2007,ASTM,"D611-07 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2004,ASTM,"D611-04 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2001,ASTM,"D611-01b Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2001,ASTM,"D611-01a Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2001,ASTM,"D611-01 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 1998,ASTM,"D611-82(1998) Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents" 2013,ASTM,"D6109-13 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products" 2010,ASTM,"D6109-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products" 1997,ASTM,"D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber" 2005,ASTM,"D6109-05 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products" 2003,ASTM,"D6109-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber" 2013,ASTM,"D6108-13 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes" 2009,ASTM,"D6108-09 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes" 1997,ASTM,"D6108-97 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes" 2003,ASTM,"D6108-03 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes" 1997,ASTM,"D6106-97e1 Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers" 2010,ASTM,"D6106-97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers" 2004,ASTM,"D6106-97(2004) Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers" 2011,ASTM,"D6104-97(2011) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off" 2003,ASTM,"D6104-97(2003) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off" 1997,ASTM,"D6104-97 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off" 2015,ASTM,"D6102-15 Standard Guide for Installation of Geosynthetic Clay Liners" 2012,ASTM,"D6102-12 Standard Guide for Installation of Geosynthetic Clay Liners" 1997,ASTM,"D6102-97 Standard Guide for Installation of Geosynthetic Clay Liners" 2006,ASTM,"D6102-06 Standard Guide for Installation of Geosynthetic Clay Liners" 2004,ASTM,"D6102-04 Standard Guide for Installation of Geosynthetic Clay Liners" 1989,ASTM,"D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces" 2012,ASTM,"D610-08(2012) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces" 2008,ASTM,"D610-08 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces" 2007,ASTM,"D610-07 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces" 2001,ASTM,"D610-01 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces" 1995,ASTM,"D610-95 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces" 2015,ASTM,"D61-15 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) (Redline)" 2015,ASTM,"D61-15 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)" 2004,ASTM,"D61-75(2004) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)" 1999,ASTM,"D61-75(1999) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)" 2010,ASTM,"D61-75(2010) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)" 2010,ASTM,"D6098-10 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)" 2003,ASTM,"D6098-97(2003) Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)" 1997,ASTM,"D6098-97 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)" 2014,ASTM,"D6092-14 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control" 1997,ASTM,"D6092-97e1 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control" 2008,ASTM,"D6092-97(2008) Standard Practice for Specifying Standard Sizes of Stone for Erosion Control" 2003,ASTM,"D6092-97(2003) Standard Practice for Specifying Standard Sizes of Stone for Erosion Control" 2014,ASTM,"D6091-07(2014) Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error" 1997,ASTM,"D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error" 2007,ASTM,"D6091-07 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error" 2003,ASTM,"D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error" 1997,ASTM,"D6089-97e1 Standard Guide for Documenting a Ground-Water Sampling Event" 2010,ASTM,"D6089-97(2010) Standard Guide for Documenting a Groundwater Sampling Event" 2003,ASTM,"D6089-97(2003) Standard Guide for Documenting a Ground-Water Sampling Event" 2011,ASTM,"D6088-06(2011) Standard Practice for Installation of Geocomposite Pavement Drains" 2002,ASTM,"D6088-97(2002) Standard Practice for Installation of Geocomposite Pavement Drains" 2006,ASTM,"D6088-06 Standard Practice for Installation of Geocomposite Pavement Drains" 2015,ASTM,"D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 1997,ASTM,"D6087-97e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2008,ASTM,"D6087-08 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar (Redline)" 2001,ASTM,"D6087-97(2001) Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2008,ASTM,"D6087-08 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2007,ASTM,"D6087-07 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2005,ASTM,"D6087-05 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2003,ASTM,"D6087-03 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar" 2013,ASTM,"D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer (Redline)" 2013,ASTM,"D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer" 1997,ASTM,"D6083-97a Standard Specification for Liquid Applied Acrylic Coating Used in Roofing" 2005,ASTM,"D6083-05 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing" 2015,ASTM,"D6072/D6072M-09(2015) Standard Practice for Obtaining Samples of Geosynthetic Clay Liners" 1996,ASTM,"D6067-96e1 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization" 2010,ASTM,"D6067-10 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization" 2003,ASTM,"D6067-96(2003) Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization" 2011,ASTM,"D6066-11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential " 2011,ASTM,"D6066-11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Redline)" 1996,ASTM,"D6066-96e1 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential" 2004,ASTM,"D6066-96(2004) Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential" 2014,ASTM,"D6036-96(2014) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps" 2008,ASTM,"D6036-96(2008) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps" 2002,ASTM,"D6036-96(2002) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements—Use of Maps" 2010,ASTM,"D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test" 2004,ASTM,"D6034-96(2004) Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test" 1996,ASTM,"D6034-96 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test" 1996,ASTM,"D6033-96e1 Standard Guide for Describing the Functionality of a Ground-Water Modeling Code" 2008,ASTM,"D6033-96(2008) Standard Guide for Describing the Functionality of a Groundwater Modeling Code" 2002,ASTM,"D6033-96(2002) Standard Guide for Describing the Functionality of a Ground-Water Modeling Code" 2008,ASTM,"D6032-08 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core (Redline)" 1996,ASTM,"D6032-96 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core" 2008,ASTM,"D6032-08 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core" 2006,ASTM,"D6032-02(2006) Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core" 2002,ASTM,"D6032-02 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core" 2015,ASTM,"D6031/D6031M-96(2015) Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes" 2015,ASTM,"D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability" 2015,ASTM,"D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability (Redline)" 2008,ASTM,"D6030-96(2008) Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability" 2002,ASTM,"D6030-96(2002) Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability" 2010,ASTM,"D6029-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method" 2004,ASTM,"D6029-96(2004) Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method" 1996,ASTM,"D6029-96 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method" 2010,ASTM,"D6028-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method" 2004,ASTM,"D6028-96(2004) Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method" 1996,ASTM,"D6028-96 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method" 2015,ASTM,"D6027/D6027M-15 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes" 2013,ASTM,"D6026-13 Standard Practice for Using Significant Digits in Geotechnical Data (Redline)" 2013,ASTM,"D6026-13 Standard Practice for Using Significant Digits in Geotechnical Data" 2001,ASTM,"D6026-01e1 Standard Practice for Using Significant Digits in Geotechnical Data" 1999,ASTM,"D6026-99 Standard Practice for Using Significant Digits in Geotechnical Data" 2006,ASTM,"D6026-06 Standard Practice for Using Significant Digits in Geotechnical Data" 2015,ASTM,"D6024/D6024M-15 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application" 2015,ASTM,"D6023-15 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)" 1996,ASTM,"D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)" 2007,ASTM,"D6023-07 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)" 2002,ASTM,"D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)" 2014,ASTM,"D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber" 2014,ASTM,"D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber (Redline)" 1996,ASTM,"D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber" 2008,ASTM,"D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber" 2002,ASTM,"D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber" 1997,ASTM,"D6006-97a Standard Guide for Assessing Biodegradability of Hydraulic Fluids" 2003,ASTM,"D6006-97a(2003) Standard Guide for Assessing Biodegradability of Hydraulic Fluids" 2011,ASTM,"D6006-11 Standard Guide for Assessing Biodegradability of Hydraulic Fluids" 2008,ASTM,"D6006-97a(2008) Standard Guide for Assessing Biodegradability of Hydraulic Fluids" 2012,ASTM,"D6001-05(2012) Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization" 1996,ASTM,"D6001-96e1 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations" 2002,ASTM,"D6001-96(2002) Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations" 2005,ASTM,"D6001-05 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization" 2015,ASTM,"D6000-15 Standard Guide for Presentation of Water-Level Information from Groundwater Sites" 2015,ASTM,"D6000-15 Standard Guide for Presentation of Water-Level Information from Groundwater Sites (Redline)" 2008,ASTM,"D6000-96(2008) Standard Guide for Presentation of Water-Level Information from Groundwater Sites" 2002,ASTM,"D6000-96(2002) Standard Guide for Presentation of Water-Level Information From Ground-Water Sites" 2010,ASTM,"D5995-98(2010) Standard Guide for Environmental Site Characterization in Cold Regions" 2004,ASTM,"D5995-98(2004) Standard Guide for Environmental Site Characterization in Cold Regions" 1998,ASTM,"D5995-98 Standard Guide for Environmental Site Characterization in Cold Regions" 2015,ASTM,"D5994/D5994M-10(2015)e1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes" 1998,ASTM,"D5994-98 Standard Test Method for Measuring Core Thickness of Textured Geomembrane" 2010,ASTM,"D5994-10 Standard Test Method for Measuring Core Thickness of Textured Geomembrane (Redline)" 2010,ASTM,"D5994-10 Standard Test Method for Measuring Core Thickness of Textured Geomembrane" 2003,ASTM,"D5994-98(2003) Standard Test Method for Measuring Core Thickness of Textured Geomembrane" 2014,ASTM,"D5993-14 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners (Redline)" 2014,ASTM,"D5993-14 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners" 2009,ASTM,"D5993-99(2009) Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners" 2004,ASTM,"D5993-99(2004) Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners" 1999,ASTM,"D5993-99 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners" 2015,ASTM,"D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Redline)" 2015,ASTM,"D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)" 1996,ASTM,"D5982-96 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)" 2007,ASTM,"D5982-07 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)" 2002,ASTM,"D5982-02 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)" 2002,ASTM,"D5981-96(2002) Standard Guide for Calibrating a Ground-Water Flow Model Application" 1996,ASTM,"D5980-96e1 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring" 2010,ASTM,"D5980-96(2010)e1 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring" 2004,ASTM,"D5980-96(2004) Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring" 2008,ASTM,"D5979-96(2008) Standard Guide for Conceptualization and Characterization of Groundwater Systems" 2002,ASTM,"D5979-96(2002) Standard Guide for Conceptualization and Characterization of Ground-Water Systems" 2011,ASTM,"D5978-96(2011)e1 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells" 1996,ASTM,"D5978-96e1 Standard Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells" 2005,ASTM,"D5978-96(2005) Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells" 2015,ASTM,"D5977-15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures (Redline)" 2015,ASTM,"D5977-15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures" 2012,ASTM,"D5977-03(2012) Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures" 1996,ASTM,"D5977-96 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures" 2007,ASTM,"D5977-03(2007) Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures" 2003,ASTM,"D5977-03 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures" 2012,ASTM,"D5973-97(2012) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing" 2007,ASTM,"D5973-97(2007) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing" 2003,ASTM,"D5973-97(2003) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing" 1997,ASTM,"D5973-97 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing" 2013,ASTM,"D5971/D5971M-13 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material" 2009,ASTM,"D5970-09 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure (Redline)" 2009,ASTM,"D5970-09 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure" 2002,ASTM,"D5970-96(2002) Standard Practice for Deterioration of Geotextiles from Outdoor Exposure" 1996,ASTM,"D5970-96 Standard Practice for Deterioration of Geotextiles from Outdoor Exposure" 2006,ASTM,"D596-01(2006) Standard Guide for Reporting Results of Analysis of Water" 2011,ASTM,"D596-01(2011) Standard Guide for Reporting Results of Analysis of Water" 2001,ASTM,"D596-01 Standard Guide for Reporting Results of Analysis of Water" 1995,ASTM,"D596-91(1995) Standard Guide for Reporting Results of Analysis of Water" 2013,ASTM,"D5957-98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations" 2005,ASTM,"D5957-98(2005) Standard Guide for Flood Testing Horizontal Waterproofing Installations" 1998,ASTM,"D5957-98 Standard Guide for Flood Testing Horizontal Waterproofing Installations" 2014,ASTM,"D5950-14 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 2012,ASTM,"D5950-12a Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) (Redline)" 2012,ASTM,"D5950-12a Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 2012,ASTM,"D5950-12 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 1996,ASTM,"D5950-96 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 2002,ASTM,"D5950-02 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 2007,ASTM,"D5950-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)" 2013,ASTM,"D5933-96(2013) Standard Specification for 258-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions" 2007,ASTM,"D5933-96(2007) Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions" 2001,ASTM,"D5933-96(2001) Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions" 1996,ASTM,"D5933-96 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions" 2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems (Redline)" 2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 2011,ASTM,"D5926-11 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 2009,ASTM,"D5926-09 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 1996,ASTM,"D5926-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 2004,ASTM,"D5926-04 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 2001,ASTM,"D5926-01 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems" 1996,ASTM,"D5924-96e1 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations" 2010,ASTM,"D5924-96(2010) Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations" 2004,ASTM,"D5924-96(2004) Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations" 1996,ASTM,"D5923-96e1 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations" 2010,ASTM,"D5923-96(2010) Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations" 2004,ASTM,"D5923-96(2004) Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations" 1996,ASTM,"D5922-96e1 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations" 2010,ASTM,"D5922-96(2010) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations" 2004,ASTM,"D5922-96(2004) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations" 2003,ASTM,"D5921-96(2003)e1 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems" 1996,ASTM,"D5921-96e1 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems" 2010,ASTM,"D5921-96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems" 2014,ASTM,"D5920-14 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method" 1996,ASTM,"D5920-96 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method" 2013,ASTM,"D5918-13 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Redline)" 2013,ASTM,"D5918-13 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils" 2001,ASTM,"D5918-96(2001) Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils" 1996,ASTM,"D5918-96 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils" 2006,ASTM,"D5918-06 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils" 2015,ASTM,"D5917-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2015,ASTM,"D5917-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2015,ASTM,"D5917-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration (Redline)" 2012,ASTM,"D5917-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2002,ASTM,"D5917-02 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2009,ASTM,"D5917-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration" 2012,ASTM,"D5910-05(2012) Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography" 2005,ASTM,"D5910-05 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography" 2012,ASTM,"D5903-96(2012) Standard Guide for Planning and Preparing for a Groundwater Sampling Event" 1996,ASTM,"D5903-96e1 Standard Guide for Planning and Preparing for a Groundwater Sampling Event" 2006,ASTM,"D5903-96(2006) Standard Guide for Planning and Preparing for a Groundwater Sampling Event" 2001,ASTM,"D5903-96(2001) Standard Guide for Planning and Preparing for a Groundwater Sampling Event" 2009,ASTM,"D5891-02(2009) Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners (Redline)" 2009,ASTM,"D5891-02(2009) Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners" 1995,ASTM,"D5891-95 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners" 2002,ASTM,"D5891-02 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners" 1995,ASTM,"D5890-95 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2006,ASTM,"D5890-06 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2002,ASTM,"D5890-02 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2011,ASTM,"D5890-11 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners (Redline)" 2011,ASTM,"D5890-11 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners" 2011,ASTM,"D5889-11 Standard Practice for Quality Control of Geosynthetic Clay Liners (Redline)" 1997,ASTM,"D5889-97 Standard Practice for Quality Control of Geosynthetic Clay Liners" 2008,ASTM,"D5889-97(2008) Standard Practice for Quality Control of Geosynthetic Clay Liners" 2003,ASTM,"D5889-97(2003) Standard Practice for Quality Control of Geosynthetic Clay Liners" 2011,ASTM,"D5889-11 Standard Practice for Quality Control of Geosynthetic Clay Liners" 2011,ASTM,"D5888-06(2011) Standard Guide for Storage and Handling of Geosynthetic Clay Liners" 1995,ASTM,"D5888-95 Standard Guide for Storage and Handling of Geosynthetic Clay Liners" 2002,ASTM,"D5888-95(2002)e1 Standard Guide for Storage and Handling of Geosynthetic Clay Liners" 2006,ASTM,"D5888-06 Standard Guide for Storage and Handling of Geosynthetic Clay Liners" 2009,ASTM,"D5887-09 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter (Redline)" 2009,ASTM,"D5887-09 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter" 1999,ASTM,"D5887-99 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter" 2008,ASTM,"D5887-08 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter" 2004,ASTM,"D5887-04 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter" 2011,ASTM,"D5886-95(2011) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications" 2006,ASTM,"D5886-95(2006) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications" 2001,ASTM,"D5886-95(2001) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications" 1995,ASTM,"D5886-95 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications" 2015,ASTM,"D5885/D5885M-15 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry" 2015,ASTM,"D5884/D5884M-04A(2015)e1 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 1999,ASTM,"D5884-99 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 2010,ASTM,"D5884-04a(2010) Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 2004,ASTM,"D5884-04a Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 2004,ASTM,"D5884-04 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 2001,ASTM,"D5884-01 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes" 2012,ASTM,"D5883-12 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes (Redline)" 2012,ASTM,"D5883-12 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 2008,ASTM,"D5883-96(2008) Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 2002,ASTM,"D5883-96(2002) Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes" 2013,ASTM,"D5882-07(2013) Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations" 2007,ASTM,"D5882-07 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations" 2000,ASTM,"D5882-00 Standard Test Method for Low Strain Integrity Testing of Piles" 2013,ASTM,"D5881-13 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) (Redline)" 2013,ASTM,"D5881-13 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)" 2005,ASTM,"D5881-95(2005) Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)" 2000,ASTM,"D5881-95(2000) Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)" 1995,ASTM,"D5879-95e1 Standard Practice for Surface Site Characterization for On-Site Septic Systems" 2010,ASTM,"D5879-95(2010) Standard Practice for Surface Site Characterization for On-Site Septic Systems" 2003,ASTM,"D5879-95(2003) Standard Practice for Surface Site Characterization for On-Site Septic Systems" 2008,ASTM,"D5878-08 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes (Redline)" 2005,ASTM,"D5878-05 Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes" 2000,ASTM,"D5878-00 Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes" 2012,ASTM,"D5876-95(2012)e1 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2005,ASTM,"D5876-95(2005) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2000,ASTM,"D5876-95(2000) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2013,ASTM,"D5875/D5875M-13 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices (Redline)" 2013,ASTM,"D5875/D5875M-13 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2016,ASTM,"D5874-16 Standard Test Methods for Determination of the Impact Value (IV) of a Soil (Redline)" 2016,ASTM,"D5874-16 Standard Test Methods for Determination of the Impact Value (IV) of a Soil" 1995,ASTM,"D5874-95 Standard Test Method for Determination of the Impact Value (IV) of a Soil" 2007,ASTM,"D5874-02(2007) Standard Test Method for Determination of the Impact Value (IV) of a Soil" 2002,ASTM,"D5874-02 Standard Test Method for Determination of the Impact Value (IV) of a Soil" 2014,ASTM,"D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Redline)" 2014,ASTM,"D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method" 2013,ASTM,"D5873-13 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method" 2005,ASTM,"D5873-00(2005)e1 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method" 2005,ASTM,"D5873-05 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method" 2000,ASTM,"D5873-00 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method" 2013,ASTM,"D5872/D5872M-13 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices (Redline)" 2013,ASTM,"D5872/D5872M-13 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices" 2012,ASTM,"D5871-12 Standard Specification for Benzene for Cyclohexane Feedstock" 1998,ASTM,"D5871-98 Standard Specification for Benzene for Cyclohexane Feedstock" 2004,ASTM,"D5871-04 Standard Specification for Benzene for Cyclohexane Feedstock" 2006,ASTM,"D5871-06 Standard Specification for Benzene for Cyclohexane Feedstock" 2007,ASTM,"D5871-07 Standard Specification for Benzene for Cyclohexane Feedstock" 2011,ASTM,"D5871-11 Standard Specification for Benzene for Cyclohexane Feedstock" 2008,ASTM,"D5871-08 Standard Specification for Benzene for Cyclohexane Feedstock" 2013,ASTM,"D5869-07a(2013) Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials" 2013,ASTM,"D5869-07(2013) Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials" 2000,ASTM,"D5869-95(2000)e1 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials" 2007,ASTM,"D5869-07a Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials (Redline)" 2002,ASTM,"D5869-95(2002) Standard Practice for Dark Oven Heat Exposure of Bituminous Materials" 2007,ASTM,"D5869-07a Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials" 2007,ASTM,"D5869-07 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials" 2004,ASTM,"D5869-04a Standard Practice for Dark Oven Heat Exposure of Bituminous Materials" 2004,ASTM,"D5869-04 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials" 2013,ASTM,"D5865-13 Standard Test Method for Gross Calorific Value of Coal and Coke (Redline)" 2013,ASTM,"D5865-13 Standard Test Method for Gross Calorific Value of Coal and Coke" 1998,ASTM,"D5865-98a Standard Test Method for Gross Calorific Value of Coal and Coke" 2012,ASTM,"D5865-12 Standard Test Method for Gross Calorific Value of Coal and Coke" 1999,ASTM,"D5865-99a Standard Test Method for Gross Calorific Value of Coal and Coke" 2000,ASTM,"D5865-00 Standard Test Method for Gross Calorific Value of Coal and Coke" 2001,ASTM,"D5865-01 Standard Test Method for Gross Calorific Value of Coal and Coke" 2001,ASTM,"D5865-01a Standard Test Method for Gross Calorific Value of Coal and Coke" 2002,ASTM,"D5865-02 Standard Test Method for Gross Calorific Value of Coal and Coke" 2003,ASTM,"D5865-03 Standard Test Method for Gross Calorific Value of Coal and Coke" 2003,ASTM,"D5865-03a Standard Test Method for Gross Calorific Value of Coal and Coke" 2004,ASTM,"D5865-04 Standard Test Method for Gross Calorific Value of Coal and Coke" 2007,ASTM,"D5865-07 Standard Test Method for Gross Calorific Value of Coal and Coke" 2007,ASTM,"D5865-07a Standard Test Method for Gross Calorific Value of Coal and Coke" 2010,ASTM,"D5865-10 Standard Test Method for Gross Calorific Value of Coal and Coke" 2010,ASTM,"D5865-10ae1 Standard Test Method for Gross Calorific Value of Coal and Coke" 2011,ASTM,"D5865-11 Standard Test Method for Gross Calorific Value of Coal and Coke" 2010,ASTM,"D5865-10a Standard Test Method for Gross Calorific Value of Coal and Coke" 2011,ASTM,"D5865-11a Standard Test Method for Gross Calorific Value of Coal and Coke" 2015,ASTM,"D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory" 1996,ASTM,"D5858-96e1 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory" 2008,ASTM,"D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory" 2003,ASTM,"D5858-96(2003) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory" 2015,ASTM,"D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Redline)" 2015,ASTM,"D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter" 2002,ASTM,"D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter" 2007,ASTM,"D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter" 2002,ASTM,"D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter" 1995,ASTM,"D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter" 2013,ASTM,"D5855-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well" 2006,ASTM,"D5855-95(2006) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well" 2000,ASTM,"D5855-95(2000) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well" 2007,ASTM,"D5852-00(2007) Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method (Redline)" 1995,ASTM,"D5852-95 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method" 2007,ASTM,"D5852-00(2007) Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method" 2000,ASTM,"D5852-00 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method" 2015,ASTM,"D5851-95(2015) Standard Guide for Planning and Implementing a Water Monitoring Program" 2011,ASTM,"D5851-95(2011) Standard Guide for Planning and Implementing a Water Monitoring Program (Redline)" 2011,ASTM,"D5851-95(2011) Standard Guide for Planning and Implementing a Water Monitoring Program" 2006,ASTM,"D5851-95(2006) Standard Guide for Planning and Implementing a Water Monitoring Program" 2000,ASTM,"D5851-95(2000) Standard Guide for Planning and Implementing a Water Monitoring Program" 2012,ASTM,"D5850-95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells" 2006,ASTM,"D5850-95(2006) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells" 2000,ASTM,"D5850-95(2000) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells" 2012,ASTM,"D5847-02(2012) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis" 2007,ASTM,"D5847-02(2007) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis" 2002,ASTM,"D5847-02 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis" 2014,ASTM,"D5843/D5843M-95(2014)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing" 2000,ASTM,"D5843-95(2000)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing" 2006,ASTM,"D5843-95(2006) Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing" 2013,ASTM,"D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate (Redline)" 2013,ASTM,"D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate" 1995,ASTM,"D5821-95 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate" 2006,ASTM,"D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate" 2001,ASTM,"D5821-01 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate" 2011,ASTM,"D5820-95(2011) Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes" 2001,ASTM,"D5820-95(2001)e1 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes" 2006,ASTM,"D5820-95(2006) Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes" 1995,ASTM,"D5820-95 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes" 2012,ASTM,"D5819-05(2012) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability" 2005,ASTM,"D5819-05 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability" 2011,ASTM,"D5818-11 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics (Redline)" 2011,ASTM,"D5818-11 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics" 2000,ASTM,"D5818-95(2000) Standard Practice for Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage" 2006,ASTM,"D5818-06 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics" 2014,ASTM,"D5808-09a(2014) Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 1995,ASTM,"D5808-95 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2003,ASTM,"D5808-03 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2009,ASTM,"D5808-09a Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2009,ASTM,"D5808-09a Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Redline)" 2009,ASTM,"D5808-09 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry" 2012,ASTM,"D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials" 2006,ASTM,"D5801-95(2006)e1 Standard Test Method for Toughness and Tenacity of Bituminous Materials" 2006,ASTM,"D5801-95(2006) Standard Test Method for Toughness and Tenacity of Bituminous Materials" 2001,ASTM,"D5801-95(2001) Standard Test Method for Toughness and Tenacity of Bituminous Materials" 1995,ASTM,"D5801-95 Standard Test Method for Toughness and Tenacity of Bituminous Materials" 2015,ASTM,"D5798-15 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2014,ASTM,"D5798-14 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2013,ASTM,"D5798-13a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2013,ASTM,"D5798-13 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2012,ASTM,"D5798-12 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 1999,ASTM,"D5798-99 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2006,ASTM,"D5798-06 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2007,ASTM,"D5798-07 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2009,ASTM,"D5798-09 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2009,ASTM,"D5798-09a Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2010,ASTM,"D5798-10a Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines" 2011,ASTM,"D5798-11 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines" 2004,ASTM,"D5798-99(2004) Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines" 2010,ASTM,"D5798-10 Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines" 2015,ASTM,"D5792-10(2015) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives" 2010,ASTM,"D5792-10 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives (Redline)" 2010,ASTM,"D5792-10 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives" 1995,ASTM,"D5792-95 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives" 2006,ASTM,"D5792-02(2006) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives" 2002,ASTM,"D5792-02 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives" 2014,ASTM,"D5787-14 Standard Practice for Monitoring Well Protection" 2014,ASTM,"D5787-14 Standard Practice for Monitoring Well Protection (Redline)" 2009,ASTM,"D5787-95(2009) Standard Practice for Monitoring Well Protection" 2000,ASTM,"D5787-95(2000) Standard Practice for Monitoring Well Protection" 2012,ASTM,"D5786-95(2012) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems" 2006,ASTM,"D5786-95(2006) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems" 2000,ASTM,"D5786-95(2000) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems" 2013,ASTM,"D5785-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)" 2006,ASTM,"D5785-95(2006) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)" 2000,ASTM,"D5785-95(2000) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)" 2013,ASTM,"D5784/D5784M-13 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices (Redline)" 2013,ASTM,"D5784/D5784M-13 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2012,ASTM,"D5783-95(2012) Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2006,ASTM,"D5783-95(2006) Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2000,ASTM,"D5783-95(2000) Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2012,ASTM,"D5782-95(2012) Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2006,ASTM,"D5782-95(2006) Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2000,ASTM,"D5782-95(2000) Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices" 2010,ASTM,"D5780-10 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load (Redline)" 2010,ASTM,"D5780-10 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load" 2002,ASTM,"D5780-95(2002) Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load" 1995,ASTM,"D5780-95 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load" 2014,ASTM,"D5779/D5779M-14 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control (Redline)" 2014,ASTM,"D5779/D5779M-14 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control" 2012,ASTM,"D5778-12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils (Redline)" 2012,ASTM,"D5778-12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils " 2000,ASTM,"D5778-95(2000) Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils" 2007,ASTM,"D5778-07 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils" 2011,ASTM,"D5777-00(2011)e1 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation" 2006,ASTM,"D5777-00(2006) Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation" 2000,ASTM,"D5777-00 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation" 2014,ASTM,"D5776-14a Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration (Redline)" 2014,ASTM,"D5776-14a Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2014,ASTM,"D5776-14 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2013,ASTM,"D5776-13 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 1999,ASTM,"D5776-99 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2006,ASTM,"D5776-99(2006) Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2007,ASTM,"D5776-07 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2007,ASTM,"D5776-07e1 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration" 2012,ASTM,"D5776-07(2012) Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration " 2013,ASTM,"D5764-97a(2013) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products" 2007,ASTM,"D5764-97a(2007) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products" 2002,ASTM,"D5764-97a(2002) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products" 1997,ASTM,"D5764-97a Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products" 2012,ASTM,"D5759-12 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses (Redline)" 2012,ASTM,"D5759-12 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses" 2005,ASTM,"D5759-95(2005) Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses" 1995,ASTM,"D5759-95 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses" 2010,ASTM,"D5753-05(2010) Standard Guide for Planning and Conducting Borehole Geophysical Logging" 2005,ASTM,"D5753-05 Standard Guide for Planning and Conducting Borehole Geophysical Logging" 2012,ASTM,"D5751-99(2012) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products" 2005,ASTM,"D5751-99(2005) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products" 1999,ASTM,"D5751-99 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products" 2014,ASTM,"D5737/D5737M-14 Standard Guide for Methods for Measuring Well Discharge (Redline)" 2014,ASTM,"D5737/D5737M-14 Standard Guide for Methods for Measuring Well Discharge" 1995,ASTM,"D5731-95 Standard Test Method for Determination of the Point Load Strength Index of Rock" 2008,ASTM,"D5731-08 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications" 2007,ASTM,"D5731-07 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications" 2005,ASTM,"D5731-05 Standard Test Method for Determination of the Point Load Strength Index of Rock" 2002,ASTM,"D5731-02 Standard Test Method for Determination of the Point Load Strength Index of Rock" 2015,ASTM,"D573-04(2015) Standard Test Method for Rubber—Deterioration in an Air Oven" 2010,ASTM,"D573-04(2010) Standard Test Method for Rubber—Deterioration in an Air Oven" 1999,ASTM,"D573-99 Standard Test Method for Rubber-Deterioration in an Air Oven" 2004,ASTM,"D573-04 Standard Test Method for Rubber—Deterioration in an Air Oven" 2013,ASTM,"D5726-98(2013) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing" 2005,ASTM,"D5726-98(2005) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing" 1998,ASTM,"D5726-98 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing" 2013,ASTM,"D5721-08(2013) Standard Practice for Air-Oven Aging of Polyolefin Geomembranes" 2008,ASTM,"D5721-08 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes (Redline)" 2002,ASTM,"D5721-95(2002) Standard Practice for Air-Oven Aging of Polyolefin Geomembranes" 1995,ASTM,"D5721-95 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes" 2008,ASTM,"D5721-08 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes" 2017,ASTM,"C475/C475M-17 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board " 2002,ASTM,"D5720-95(2002) Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes" 1995,ASTM,"D5720-95 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes" 2015,ASTM,"D572-04(2015) Standard Test Method for Rubber—Deterioration by Heat and Oxygen" 2009,ASTM,"D572-04(2009) Standard Test Method for Rubber-Deterioration by Heat and Oxygen" 2010,ASTM,"D572-04(2010) Standard Test Method for Rubber-Deterioration by Heat and Oxygen" 2004,ASTM,"D572-04 Standard Test Method for Rubber-Deterioration by Heat and Oxygen" 1999,ASTM,"D572-99 Standard Test Method for Rubber-Deterioration by Heat and Oxygen" 2013,ASTM,"D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes (Redline)" 2013,ASTM,"D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes" 2006,ASTM,"D5719-95(2006) Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes" 2000,ASTM,"D5719-95(2000) Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes" 2013,ASTM,"D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application (Redline)" 2013,ASTM,"D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application" 2012,ASTM,"D5718-95(2012) Standard Guide for Documenting a Groundwater Flow Model Application" 2006,ASTM,"D5718-95(2006) Standard Guide for Documenting a Groundwater Flow Model Application" 2000,ASTM,"D5718-95(2000) Standard Guide for Documenting a Ground-Water Flow Model Application" 2014,ASTM,"D5715-14 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)" 2014,ASTM,"D5715-14 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) (Redline)" 2006,ASTM,"D5715-00(2006) Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)" 2000,ASTM,"D5715-00 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)" 2014,ASTM,"D5713-14 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography (Redline)" 2014,ASTM,"D5713-14 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography" 2000,ASTM,"D5713-00 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography" 2009,ASTM,"D5713-09 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography" 2005,ASTM,"D5713-05 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography" 2015,ASTM,"D5710/D5710M-15 Standard Specification for Trinidad Lake Modified Asphalt (Redline)" 2015,ASTM,"D5710/D5710M-15 Standard Specification for Trinidad Lake Modified Asphalt" 2013,ASTM,"D5703-95(2013) Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry" 2007,ASTM,"D5703-95(2007) Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry" 2001,ASTM,"D5703-95(2001) Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry" 1995,ASTM,"D5703-95 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry" 1995,ASTM,"D570-95 Standard Test Method for Water Absorption of Plastics" 2010,ASTM,"D570-98(2010)e1 Standard Test Method for Water Absorption of Plastics" 2005,ASTM,"D570-98(2005) Standard Test Method for Water Absorption of Plastics" 1998,ASTM,"D570-98 Standard Test Method for Water Absorption of Plastics" 2011,ASTM,"D5685-11 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings" 1995,ASTM,"D5685-95 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings" 2005,ASTM,"D5685-05 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings" 2002,ASTM,"D5685-02 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings" 2001,ASTM,"D5685-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings" 2006,ASTM,"D5665-99a(2006) Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing" 1999,ASTM,"D5665-99a Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing" 2010,ASTM,"D5664-10 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 1999,ASTM,"D5664-99 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2008,ASTM,"D5664-08 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2002,ASTM,"D5664-02 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2001,ASTM,"D5664-01a Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2001,ASTM,"D5664-01 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber" 2015,ASTM,"D5663-15 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard" 2011,ASTM,"D5663-97(2011) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard " 1997,ASTM,"D5663-97 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard" 2003,ASTM,"D5663-97(2003) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard" 2015,ASTM,"D5652-15 Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products" 2013,ASTM,"D5652-95(2013) Standard Test Methods for Bolted Connections in Wood and Wood-Based Products" 2007,ASTM,"D5652-95(2007) Standard Test Methods for Bolted Connections in Wood and Wood-Base Products" 2000,ASTM,"D5652-95(2000) Standard Test Methods for Bolted Connections in Wood and Wood-Base Products" 1995,ASTM,"D5652-95 Standard Test Methods for Bolted Connections in Wood and Wood-Base Products" 2013,ASTM,"D5651-13 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials" 2008,ASTM,"D5651-95a(2008) Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials" 2002,ASTM,"D5651-95a(2002) Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials" 2012,ASTM,"D5643/D5643M-06(2012)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Free" 2000,ASTM,"D5643-94(2000)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Free" 2006,ASTM,"D5643-06 Standard Specification for Coal Tar Roof Cement, Asbestos Free" 2009,ASTM,"D5642-09 Standard Test Method for Sealed Tube Chemical Compatibility Test" 2004,ASTM,"D5642-99(2004) Standard Test Method for Sealed Tube Chemical Compatibility Test" 1999,ASTM,"D5642-99 Standard Test Method for Sealed Tube Chemical Compatibility Test" 1994,ASTM,"D5641-94e1 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber" 2011,ASTM,"D5641-94(2011) Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber" 2001,ASTM,"D5641-94(2001)e1 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber" 2006,ASTM,"D5641-94(2006) Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber" 2013,ASTM,"D5624-13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications" 2007,ASTM,"D5624-02(2007) Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications" 2002,ASTM,"D5624-02 Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications" 2000,ASTM,"D5624-00 Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications" 2015,ASTM,"D5617-04(2015) Standard Test Method for Multi-Axial Tension Test for Geosynthetics" 2010,ASTM,"D5617-04(2010) Standard Test Method for Multi-Axial Tension Test for Geosynthetics" 2004,ASTM,"D5617-04 Standard Test Method for Multi-Axial Tension Test for Geosynthetics" 2016,ASTM,"D5611-94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application" 2008,ASTM,"D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application" 2002,ASTM,"D5611-94(2002) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application" 1994,ASTM,"D5610-94e1 Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling" 2008,ASTM,"D5610-94(2008) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling" 2002,ASTM,"D5610-94(2002) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling" 2016,ASTM,"D5609-16 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling" 2015,ASTM,"D5609-94(2015)e1 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling" 2008,ASTM,"D5609-94(2008) Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling" 2002,ASTM,"D5609-94(2002) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling" 2016,ASTM,"D5608-16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites" 1994,ASTM,"D5608-94 Standard Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites" 2006,ASTM,"D5608-01(2006) Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites" 2001,ASTM,"D5608-01 Standard Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites" 2010,ASTM,"D5608-10 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites" 2008,ASTM,"D5607-08 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force" 2006,ASTM,"D5607-02(2006) Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force" 2002,ASTM,"D5607-02 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force" 2013,ASTM,"D5606-09(2013) Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 1998,ASTM,"D5606-98 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 2001,ASTM,"D5606-01 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 2006,ASTM,"D5606-01(2006)e1 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 2009,ASTM,"D5606-09 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock" 2015,ASTM,"D5603-01(2015) Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber" 1996,ASTM,"D5603-96 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber" 2001,ASTM,"D5603-01 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber" 2008,ASTM,"D5603-01(2008) Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber" 1987,ASTM,"D56-87 Standard Test Method for Flash Point by Tag Closed Tester" 1993,ASTM,"D56-93 Standard Test Method for Flash Point by Tag Closed Tester" 1970,ASTM,"D56-70 Standard Method Of Test For Flash Point By Tag Closed Tester" 2010,ASTM,"D56-05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester" 2005,ASTM,"D56-05 Standard Test Method for Flash Point by Tag Closed Cup Tester" 2002,ASTM,"D56-02a Standard Test Method for Flash Point by Tag Closed Cup Tester" 2002,ASTM,"D56-02 Standard Test Method for Flash Point by Tag Closed Tester" 2001,ASTM,"D56-01 Standard Test Method for Flash Point by Tag Closed Tester" 2000,ASTM,"D56-00 Standard Test Method for Flash Point by Tag Closed Tester" 2009,ASTM,"D5596-03(2009) Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics (Redline)" 2009,ASTM,"D5596-03(2009) Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics" 1994,ASTM,"D5596-94 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics" 2003,ASTM,"D5596-03 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics" 2014,ASTM,"D5582-14 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator" 2014,ASTM,"D5582-14 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator (Redline)" 2006,ASTM,"D5582-00(2006) Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator" 2000,ASTM,"D5582-00 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator" 2013,ASTM,"D5581-07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2007,ASTM,"D5581-07ae1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2001,ASTM,"D5581-96(2001) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2007,ASTM,"D5581-07a Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2007,ASTM,"D5581-07 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2006,ASTM,"D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)" 2011,ASTM,"D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures (Redline)" 2011,ASTM,"D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures" 1996,ASTM,"D558-96 Standard Test Methods for Moisture-Density Relations of Soil-Cement Mixtures" 2004,ASTM,"D558-04 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures" 2003,ASTM,"D558-03 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures" 2012,ASTM,"D5572-95(2012) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products" 1999,ASTM,"D5572-95(1999) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products" 2005,ASTM,"D5572-95(2005) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products" 2011,ASTM,"D5567-94(2011) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems" 2006,ASTM,"D5567-94(2006) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems" 2001,ASTM,"D5567-94(2001) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems" 1999,ASTM,"D5567-94(1999) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems" 2006,ASTM,"D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer (Redline)" 1994,ASTM,"D5550-94 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer" 2006,ASTM,"D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer" 2000,ASTM,"D5550-00 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer" 2009,ASTM,"D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Redline)" 2017,ASTM,"C473-17 Standard Test Methods for Physical Testing of Gypsum Panel Products" 2001,ASTM,"D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge" 2014,ASTM,"D5539-14 Standard Specification for Seed Starter Mix" 2014,ASTM,"D5539-14 Standard Specification for Seed Starter Mix (Redline)" 2013,ASTM,"D5539-13 Standard Specification for Seed Starter Mix" 2013,ASTM,"D5539-94(2013) Standard Specification for Seed Starter Mix" 2008,ASTM,"D5539-94(2008) Standard Specification for Seed Starter Mix" 2003,ASTM,"D5539-94(2003) Standard Specification for Seed Starter Mix" 1998,ASTM,"D5539-94(1998) Standard Specification for Seed Starter Mix" 2017,ASTM,"C471M-17ae1 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)" 2015,ASTM,"D5536-15 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties" 2010,ASTM,"D5536-94(2010) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties" 2004,ASTM,"D5536-94(2004) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties" 1999,ASTM,"D5536-94(1999) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties" 2013,ASTM,"D5521/D5521M-13 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers (Redline)" 2013,ASTM,"D5521/D5521M-13 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers" 2011,ASTM,"D5520-11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression (Redline)" 2011,ASTM,"D5520-11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression" 2006,ASTM,"D5520-94(2006)e1 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression" 2001,ASTM,"D5520-94(2001) Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression" 1994,ASTM,"D5520-94 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression" 2015,ASTM,"D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Redline)" 2015,ASTM,"D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials" 2014,ASTM,"D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials" 2001,ASTM,"D5519-94(2001) Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials" 1994,ASTM,"D5519-94 Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials" 2007,ASTM,"D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials" 2009,ASTM,"D5516-09 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2003,ASTM,"D5516-03 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2002,ASTM,"D5516-02 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2001,ASTM,"D5516-01a Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2001,ASTM,"D5516-01 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2000,ASTM,"D5516-00 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures" 2014,ASTM,"D5514/D5514M-14 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics (Redline)" 2014,ASTM,"D5514/D5514M-14 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics" 2011,ASTM,"D5514-06(2011) Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics" 2001,ASTM,"D5514-94(2001) Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics" 1994,ASTM,"D5514-94 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics" 2006,ASTM,"D5514-06 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics" 2014,ASTM,"D5505-14 Standard Practice for Classifying Emulsified Recycling Agents (Redline)" 2014,ASTM,"D5505-14 Standard Practice for Classifying Emulsified Recycling Agents" 2001,ASTM,"D5505-97(2001) Standard Practice for Classifying Emulsified Recycling Agents" 1997,ASTM,"D5505-97 Standard Practice for Classifying Emulsified Recycling Agents" 2006,ASTM,"D5505-06 Standard Practice for Classifying Emulsified Recycling Agents" 2012,ASTM,"D5504-12 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence (Redline)" 2012,ASTM,"D5504-12 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence" 1998,ASTM,"D5504-98 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence" 2001,ASTM,"D5504-01 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence" 2006,ASTM,"D5504-01(2006) Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence" 2008,ASTM,"D5504-08 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence" 2015,ASTM,"D5496-15 Standard Practice for In Field Immersion Testing of Geosynthetics (Redline)" 2015,ASTM,"D5496-15 Standard Practice for In Field Immersion Testing of Geosynthetics" 1998,ASTM,"D5496-98 Standard Practice for In Field Immersion Testing of Geosynthetics" 2009,ASTM,"D5496-98(2009) Standard Practice for In Field Immersion Testing of Geosynthetics" 2003,ASTM,"D5496-98(2003) Standard Practice for In Field Immersion Testing of Geosynthetics" 1999,ASTM,"D5494-93(1999)e1 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes" 1999,ASTM,"D5494-93(1999) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes" 2011,ASTM,"D5494-93(2011) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes" 2006,ASTM,"D5494-93(2006) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes" 2011,ASTM,"D5493-06(2011) Standard Test Method for Permittivity of Geotextiles Under Load" 2003,ASTM,"D5493-93(2003) Standard Test Method for Permittivity of Geotextiles Under Load" 1998,ASTM,"D5493-93(1998) Standard Test Method for Permittivity of Geotextiles Under Load" 2006,ASTM,"D5493-06 Standard Test Method for Permittivity of Geotextiles Under Load" 2014,ASTM,"D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information" 2008,ASTM,"D5490-93(2008) Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information" 2002,ASTM,"D5490-93(2002) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information" 2012,ASTM,"D5474-93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations" 2006,ASTM,"D5474-93(2006) Standard Guide for Selection of Data Elements for Groundwater Investigations" 2000,ASTM,"D5474-93(2000) Standard Guide for Selection of Data Elements for Ground-Water Investigations" 2014,ASTM,"D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well" 1997,ASTM,"D5471-97 Standard Specification for O-Xylene 980" 2003,ASTM,"D5471-97(2003) Standard Specification for O-Xylene 980" 2004,ASTM,"D5471-04 Standard Specification for O-Xylene 980" 2004,ASTM,"D5471-04e1 Standard Specification for O-Xylene 980" 2010,ASTM,"D5471-10 Standard Specification for O-Xylene 980" 2012,ASTM,"D5469/D5469M-12 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems" 2005,ASTM,"D5469-00(2005) Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems" 2000,ASTM,"D5469-00 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems" 2010,ASTM,"D546-10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures" 1999,ASTM,"D546-99e1 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures" 2005,ASTM,"D546-99(2005) Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures" 2005,ASTM,"D546-05 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures" 2015,ASTM,"D5457-15 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2017,ASTM,"C471M-17a Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)" 2012,ASTM,"D5457-12 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design " 2004,ASTM,"D5457-04 Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 1998,ASTM,"D5457-93(1998) Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2010,ASTM,"D5457-10 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2004,ASTM,"D5457-04a Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design" 2013,ASTM,"D5456-13a Standard Specification for Evaluation of Structural Composite Lumber Products" 2014,ASTM,"D5456-14b Standard Specification for Evaluation of Structural Composite Lumber Products (Redline)" 2014,ASTM,"D5456-14b Standard Specification for Evaluation of Structural Composite Lumber Products" 2014,ASTM,"D5456-14a Standard Specification for Evaluation of Structural Composite Lumber Products" 2014,ASTM,"D5456-14 Standard Specification for Evaluation of Structural Composite Lumber Products" 2013,ASTM,"D5456-13 Standard Specification for Evaluation of Structural Composite Lumber Products" 2012,ASTM,"D5456-12 Standard Specification for Evaluation of Structural Composite Lumber Products" 2011,ASTM,"D5456-11a Standard Specification for Evaluation of Structural Composite Lumber Products" 1999,ASTM,"D5456-99a Standard Specification for Evaluation of Structural Composite Lumber Products" 2010,ASTM,"D5456-10a Standard Specification for Evaluation of Structural Composite Lumber Products" 2006,ASTM,"D5456-06 Standard Specification for Evaluation of Structural Composite Lumber Products" 2005,ASTM,"D5456-05a Standard Specification for Evaluation of Structural Composite Lumber Products" 2005,ASTM,"D5456-05 Standard Specification for Evaluation of Structural Composite Lumber Products" 2003,ASTM,"D5456-03 Standard Specification for Evaluation of Structural Composite Lumber Products" 2001,ASTM,"D5456-01ae1 Standard Specification for Evaluation of Structural Composite Lumber Products" 2001,ASTM,"D5456-01a Standard Specification for Evaluation of Structural Composite Lumber Products" 2001,ASTM,"D5456-01 Standard Specification for Evaluation of Structural Composite Lumber Products" 2010,ASTM,"D5456-10 Standard Specification for Evaluation of Structural Composite Lumber Products" 2011,ASTM,"D5456-11 Standard Specification for Evaluation of Structural Composite Lumber Products" 2009,ASTM,"D5456-09a Standard Specification for Evaluation of Structural Composite Lumber Products" 2009,ASTM,"D5456-09 Standard Specification for Evaluation of Structural Composite Lumber Products" 2008,ASTM,"D5456-08 Standard Specification for Evaluation of Structural Composite Lumber Products" 2007,ASTM,"D5456-07 Standard Specification for Evaluation of Structural Composite Lumber Products" 2014,ASTM,"D545-14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) (Redline)" 2014,ASTM,"D545-14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)" 2005,ASTM,"D545-99(2005) Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)" 1999,ASTM,"D545-99 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)" 2008,ASTM,"D545-08 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)" 2010,ASTM,"D5447-04(2010) Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem" 2004,ASTM,"D5447-04 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem" 2008,ASTM,"D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate (Redline)" 1998,ASTM,"D5444-98 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate" 2008,ASTM,"D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate" 2005,ASTM,"D5444-05 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate" 2013,ASTM,"D5435-13 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection" 1998,ASTM,"D5435-93(1998) Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection" 2008,ASTM,"D5435-03(2008) Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection" 2003,ASTM,"D5435-03 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection" 2012,ASTM,"D5434-12 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock" 2009,ASTM,"D5434-09 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock" 2003,ASTM,"D5434-97(2003) Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock" 1997,ASTM,"D5434-97 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock" 2003,ASTM,"D5434-03 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock" 2014,ASTM,"D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents" 2014,ASTM,"D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents (Redline)" 2001,ASTM,"D543-95(2001) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents" 1995,ASTM,"D543-95 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents" 2006,ASTM,"D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents" 2014,ASTM,"D5423-14 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation" 1999,ASTM,"D5423-93(1999) Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation" 2015,ASTM,"D5421-15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges" 2015,ASTM,"D5421-15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges (Redline)" 2010,ASTM,"D5421-05(2010) Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges" 1993,ASTM,"D5421-93 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges" 2005,ASTM,"D5421-05 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges" 2000,ASTM,"D5421-00 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges" 2010,ASTM,"D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)" 1998,ASTM,"D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)" 2004,ASTM,"D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)" 1998,ASTM,"D5410-93(1998) Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors" 1998,ASTM,"D5408-93(1998) Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors" 2004,ASTM,"D5408-93(2004) Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors" 2010,ASTM,"D5408-93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors" 2010,ASTM,"ASTM D5408 - 93(2010)e1 Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors" 2015,ASTM,"D5405/D5405M-98(2015) Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material" 2012,ASTM,"D5397-07(2012) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 2005,ASTM,"D5397-99(2005) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 1999,ASTM,"D5397-99 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 2007,ASTM,"D5397-07 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test" 2014,ASTM,"D5391-14 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Redline)" 2014,ASTM,"D5391-14 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample" 2009,ASTM,"D5391-99(2009) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample" 2005,ASTM,"D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample" 1999,ASTM,"D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample" 2000,ASTM,"D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry" 2004,ASTM,"D5386-04 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry" 2005,ASTM,"D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry" 2010,ASTM,"D5386-10 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry" 2000,ASTM,"D5385-93(2000)e1 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes" 2006,ASTM,"D5385-93(2006) Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes" 2013,ASTM,"D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation (Redline)" 2013,ASTM,"D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation" 2005,ASTM,"D5374-93(2005) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation" 1999,ASTM,"D5374-93(1999) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation" 2014,ASTM,"D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing" 2015,ASTM,"D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments (Redline)" 2015,ASTM,"D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments" 1998,ASTM,"D5360-98 Standard Practice for Design and Construction of Bituminous Surface Treatments" 2009,ASTM,"D5360-09 Standard Practice for Design and Construction of Bituminous Surface Treatments" 2005,ASTM,"D5360-05 Standard Practice for Design and Construction of Bituminous Surface Treatments" 2015,ASTM,"D5359-98(2015) Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber" ,ASTM,"D5359-98 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber" 1998,ASTM,"D5359-98 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber" 2010,ASTM,"D5359-98(2010) Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture o