1999,ASTM,"D1527-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2005,ASTM,"D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2003,ASTM,"D1785-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2004,ASTM,"D1785-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2004,ASTM,"D1785-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2005,ASTM,"D1785-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2006,ASTM,"D1785-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
1999,ASTM,"D1785-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2004,ASTM,"D2235-04 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2003,ASTM,"D2239-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2000,ASTM,"D2241-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04b Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2005,ASTM,"D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2000,ASTM,"D2321-00 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2005,ASTM,"D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2008,ASTM,"D2321-08 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2002,ASTM,"D2412-02 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2008,ASTM,"D2412-02(2008) Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
1996,ASTM,"D2412-96a Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2006,ASTM,"D2464-06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"D2464-99 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"D2466-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2002,ASTM,"D2466-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2005,ASTM,"D2466-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2006,ASTM,"D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
1999,ASTM,"D2466-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2001,ASTM,"D2467-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"D2467-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2004,ASTM,"D2467-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2005,ASTM,"D2467-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2006,ASTM,"D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"D2467-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2000,ASTM,"D2513-00 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2001,ASTM,"D2513-01 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2004,ASTM,"D2513-04 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2005,ASTM,"D2513-05 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08a  Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08b  Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2002,ASTM,"D2564-02 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2004,ASTM,"D2564-04 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
1996,ASTM,"D2564-96a Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2000,ASTM,"D2609-00 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2002,ASTM,"D2609-02 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2008,ASTM,"D2609-02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2003,ASTM,"D2657-03 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
2007,ASTM,"D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
1997,ASTM,"D2657-97 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
2000,ASTM,"D2661-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2661-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2661-02 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2006,ASTM,"D2661-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2661-08 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2000,ASTM,"D2665-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2665-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2007,ASTM,"D2665-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08b Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2009,ASTM,"D2665-09 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1996,ASTM,"D2672-96a Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2003,ASTM,"D2672-96a(2003) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2001,ASTM,"D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
2009,ASTM,"D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
1995,ASTM,"D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
2004,ASTM,"D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
1998,ASTM,"D2683-98 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
2003,ASTM,"D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
1996,ASTM,"D2729-96a Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2001,ASTM,"D2737-01 Standard Specification for Polyethylene (PE) Plastic Tubing"
2003,ASTM,"D2737-03 Standard Specification for Polyethylene (PE) Plastic Tubing"
1999,ASTM,"D2737-99 Standard Specification for Polyethylene (PE) Plastic Tubing"
2005,ASTM,"D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings"
1996,ASTM,"D2751-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings"
2001,ASTM,"D2774-01 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2004,ASTM,"D2774-04 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2008,ASTM,"D2774-08  Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
1994,ASTM,"D2774-94 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2001,ASTM,"D2837-01 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2001,ASTM,"D2837-01a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2002,ASTM,"D2837-02 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2004,ASTM,"D2837-04 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2008,ASTM,"D2837-08 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
1998,ASTM,"D2837-98a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2006,ASTM,"D2846/D2846M-06 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D2846/D2846M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1999,ASTM,"D2846/D2846M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1996,ASTM,"D2855-96 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2002,ASTM,"D2855-96(2002) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2000,ASTM,"D2949-00 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2949-01 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2949-01a Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2000,ASTM,"D3034-00 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2004,ASTM,"D3034-04 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2004,ASTM,"D3034-04a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2006,ASTM,"D3034-06 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2008,ASTM,"D3034-08 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2001,ASTM,"D3035-01 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2003,ASTM,"D3035-03 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2003,ASTM,"D3035-03a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2006,ASTM,"D3035-06 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2008,ASTM,"D3035-08  Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
1995,ASTM,"D3035-95 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2002,ASTM,"D3138-02 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2004,ASTM,"D3138-04 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
1995,ASTM,"D3138-95 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
1998,ASTM,"D3139-98 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2005,ASTM,"D3139-98(2005) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2007,ASTM,"D3212-07 Standard Specification for  Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
1996,ASTM,"D3212-96a Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2003,ASTM,"D3212-96a(2003) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2003,ASTM,"D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
1997,ASTM,"D3261-97 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2002,ASTM,"D3311-02 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2006,ASTM,"D3311-06 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2006,ASTM,"D3311-06a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2008,ASTM,"D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
1994,ASTM,"D3311-94 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
1998,ASTM,"F1055-98 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2000,ASTM,"F1281-00 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"F1281-01 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"F1281-01a Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1281-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2005,ASTM,"F1281-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2007,ASTM,"F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2000,ASTM,"F1282-00 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2001,ASTM,"F1282-01 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2001,ASTM,"F1282-01a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2003,ASTM,"F1282-03 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2006,ASTM,"F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
1998,ASTM,"F1290-98a Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2004,ASTM,"F1290-98a(2004) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2000,ASTM,"F1412-00 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2001,ASTM,"F1412-01 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2009,ASTM,"F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
1998,ASTM,"F1417-92(1998) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2005,ASTM,"F1417-92(2005) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2000,ASTM,"F1488-00 Standard Specification for Coextruded Composite Pipe"
2003,ASTM,"F1488-03 Standard Specification for Coextruded Composite Pipe"
2000,ASTM,"F1499-00 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2001,ASTM,"F1499-01 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2008,ASTM,"F1499-01(2008) Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2008,ASTM,"F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe"
1996,ASTM,"F1668-96 Standard Guide for Construction Procedures for Buried Plastic Pipe"
2002,ASTM,"F1668-96(2002) Standard Guide for Construction Procedures for Buried Plastic Pipe"
2002,ASTM,"F1673-02 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2004,ASTM,"F1673-04 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
1995,ASTM,"F1673-95 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
1997,ASTM,"F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2004,ASTM,"F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2002,ASTM,"F1807-02 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1807-02a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F1807-03 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1807-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1807-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1807-07 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1807-07a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1866-05 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
2007,ASTM,"F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
1998,ASTM,"F1866-98 Standard Specification for Poly  (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
2005,ASTM,"F1924-05 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
1998,ASTM,"F1924-98 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2000,ASTM,"F1960-00 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02b Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F1960-03 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1960-05 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1960-07 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1960-07a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene"
2008,ASTM,"F1960-08 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1973-02 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems"
2005,ASTM,"F1973-05 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems"
2008,ASTM,"F1973-08  Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems"
1999,ASTM,"F1973-99 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
2000,ASTM,"F1974-00a Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2001,ASTM,"F1974-01 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2002,ASTM,"F1974-02 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2008,ASTM,"F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2000,ASTM,"F1986-00a Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2006,ASTM,"F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2001,ASTM,"F2080-01 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2002,ASTM,"F2080-02 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2005,ASTM,"F2080-05 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2008,ASTM,"F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2001,ASTM,"F2098-01 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
2004,ASTM,"F2098-04 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
2008,ASTM,"F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings"
2001,ASTM,"F2159-01 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F2159-02 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F2159-03 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F2262-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2004,ASTM,"F2262-04 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2005,ASTM,"F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2007,ASTM,"F2306/F2306M-07 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2008,ASTM,"F2306/F2306M-08 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2004,ASTM,"F2389-04 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2005,ASTM,"F2389-05 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2006,ASTM,"F2389-06 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2007,ASTM,"F2389-07 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2004,ASTM,"F2434-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2008,ASTM,"F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2007,ASTM,"F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2008,ASTM,"F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2005,ASTM,"F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
1999,ASTM,"F402-93(1999) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
2005,ASTM,"F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings"
1997,ASTM,"F405-97 Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings"
2002,ASTM,"F409-02 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
2008,ASTM,"F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
1999,ASTM,"F409-99a Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
2006,ASTM,"F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"F438-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2004,ASTM,"F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
1999,ASTM,"F438-99 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2001,ASTM,"F439-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F439-02 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2005,ASTM,"F439-05 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2006,ASTM,"F439-06 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F439-99a Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F441/F441M-02 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2008,ASTM,"F441/F441M-02(2008) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
1999,ASTM,"F441/F441M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
1999,ASTM,"F442/F442M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)"
2005,ASTM,"F442/F442M-99(2005) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)"
2002,ASTM,"F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
1997,ASTM,"F449-97 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2002,ASTM,"F477-02 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2007,ASTM,"F477-07 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2008,ASTM,"F477-08 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
1999,ASTM,"F477-99 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2000,ASTM,"F480-00 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F480-02 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2006,ASTM,"F480-06a Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2006,ASTM,"F480-06b Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F481-97(2002) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
2008,ASTM,"F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
2004,ASTM,"F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
1997,ASTM,"F493-97 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
2006,ASTM,"F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
1995,ASTM,"F512-95 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2001,ASTM,"F512-95(2001) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2000,ASTM,"F628-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2001,ASTM,"F628-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2006,ASTM,"F628-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2008,ASTM,"F628-08 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2002,ASTM,"F645-02 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems"
2004,ASTM,"F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems"
2002,ASTM,"F656-02 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2008,ASTM,"F656-08 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
1996,ASTM,"F656-96a Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2006,ASTM,"F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings"
1997,ASTM,"F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings"
2000,ASTM,"F679-00a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2001,ASTM,"F679-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2003,ASTM,"F679-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2006,ASTM,"F679-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2006,ASTM,"F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2008,ASTM,"F679-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2000,ASTM,"F714-00 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2001,ASTM,"F714-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2003,ASTM,"F714-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2005,ASTM,"F714-05 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2006,ASTM,"F714-06 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2006,ASTM,"F714-06a Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2000,ASTM,"F758-95(2000) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage"
1999,ASTM,"F771-99 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2005,ASTM,"F771-99(2005) Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2001,ASTM,"F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2003,ASTM,"F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
1999,ASTM,"F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2001,ASTM,"F810-01 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
2007,ASTM,"F810-07 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
1999,ASTM,"F810-99 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
2000,ASTM,"F876-00 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F876-02 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03a Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2004,ASTM,"F876-04 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2005,ASTM,"F876-05 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2006,ASTM,"F876-06 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2007,ASTM,"F876-07 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2008,ASTM,"F876-08a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2008,ASTM,"F876-08b Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2000,ASTM,"F877-00 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2001,ASTM,"F877-01 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02a Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2005,ASTM,"F877-05 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2007,ASTM,"F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2000,ASTM,"F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2004,ASTM,"F891-04 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2007,ASTM,"F891-07 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2005,ASTM,"F894-05 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2006,ASTM,"F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2007,ASTM,"F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
1998,ASTM,"F894-98a Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2000,ASTM,"F949-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2001,ASTM,"F949-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2001,ASTM,"F949-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2003,ASTM,"F949-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2006,ASTM,"F949-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2006,ASTM,"F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2009,ASTM,"D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"D2672-96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2009,ASTM,"D2846/D2846M-09a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D2846/D2846M-09b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D3311-09 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2009,ASTM,"D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2009,ASTM,"F1488-09 Standard Specification for Coextruded Composite Pipe"
2009,ASTM,"F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2009,ASTM,"F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2009,ASTM,"F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2009,ASTM,"F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2009,ASTM,"F439-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2009,ASTM,"F441/F441M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2009,ASTM,"F442/F442M-09 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2009,ASTM,"F876-09 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2009,ASTM,"F891-09 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2009,ASTM,"F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2005,ASTM,"D1599-99(2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings"
2008,ASTM,"D2290-08 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2005,ASTM,"D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
2008,ASTM,"D2749-02(2008) Standard Symbols for Dimensions of Plastic Pipe Fittings"
2008,ASTM,"D2852-95(2008) Standard Specification for  Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2009,ASTM,"D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2008,ASTM,"D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2002,ASTM,"D6070-02 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2006,ASTM,"F1025-94(2006) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2008,ASTM,"F1041-02(2008) Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2004,ASTM,"F1056-04 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
2009,ASTM,"F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2009,ASTM,"F1365-91(2009) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
2009,ASTM,"F1429-99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
2007,ASTM,"F1473-07 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2005,ASTM,"F1483-05 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2008,ASTM,"F1498-08 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2002,ASTM,"F1504-02 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
2009,ASTM,"F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2007,ASTM,"F1563-01(2007) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2007,ASTM,"F1588-96(2007) Standard Test Method for  Constant Tensile Load Joint Test (CTLJT)"
2009,ASTM,"F1675-09 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
2008,ASTM,"F1698-02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2005,ASTM,"F1732-96(2005) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material"
2007,ASTM,"F1733-07 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2009,ASTM,"F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2008,ASTM,"F1741-08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2008,ASTM,"F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2004,ASTM,"F1802-04 Standard Test Method for Performance Testing of Excess Flow Valves"
2006,ASTM,"F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
2008,ASTM,"F1804-08 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2006,ASTM,"F1867-06 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2004,ASTM,"F1947-04 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
2005,ASTM,"F1948-05 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2005,ASTM,"F1970-05 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
2006,ASTM,"F1987-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2006,ASTM,"F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2009,ASTM,"F2019-03(2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2006,ASTM,"F2021-06 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems"
2007,ASTM,"F2135-01(2007) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2008,ASTM,"F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2009,ASTM,"F2138-09 Standard Specification for Excess Flow Valves for Natural Gas Service"
2009,ASTM,"F2145-09 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing"
2008,ASTM,"F2158-08 Standard Specification for Residential Central-Vacuum Tube and Fittings"
2007,ASTM,"F2164-02(2007) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2008,ASTM,"F2165-02(2008) Standard Specification for Flexible Pre-Insulated Piping"
2009,ASTM,"F2176-02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct"
2006,ASTM,"F2207-06 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe"
2008,ASTM,"F2231-02(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2007,ASTM,"F2435-07 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2007,ASTM,"F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes"
2006,ASTM,"F2536-06b Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2008,ASTM,"F2562/F2562M-08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure  Drainage and Sewerage"
2009,ASTM,"F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing"
2008,ASTM,"F2649-08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks"
2009,ASTM,"F412-09 Standard Terminology Relating to  Plastic Piping Systems"
2007,ASTM,"F585-94(2007) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2004,ASTM,"F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2004,ASTM,"F905-04 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints"
2008,ASTM,"F913-02(2008) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2006,ASTM,"F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2009,ASTM,"D1598-02(2009) Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2009,ASTM,"D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2009,ASTM,"D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2009,ASTM,"D2513-09a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"F1735-09  Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2008,ASTM,"F1807-08  Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1807-09  Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1960-09a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2009,ASTM,"F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2009,ASTM,"F2080-09 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2009,ASTM,"F2159-09 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2010,ASTM,"F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2009,ASTM,"F2418-09a Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2009,ASTM,"F2433-05(2009) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness"
2009,ASTM,"F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2009,ASTM,"F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2008,ASTM,"F449-02(2008) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2008,ASTM,"F714-08 Standard Specification for  Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2010,ASTM,"F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2010,ASTM,"D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2010,ASTM,"D2152-95(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
2010,ASTM,"D2683-10 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
2010,ASTM,"D2855-96(2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2010,ASTM,"D3261-10 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2010,ASTM,"D3261-10a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2010,ASTM,"F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2009,ASTM,"F1533-01(2009) Standard Specification for Deformed Polyethylene (PE) Liner"
2005,ASTM,"F1606-05 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner"
2010,ASTM,"F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2010,ASTM,"F1807-10 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2010,ASTM,"F2159-10 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2010,ASTM,"F2160-10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2010,ASTM,"F2206-02(2010) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2006,ASTM,"F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type"
2007,ASTM,"F2390-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content"
2006,ASTM,"F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2009,ASTM,"F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems"
2007,ASTM,"F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method"
2007,ASTM,"F2657-07 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing"
2007,ASTM,"F2658-07 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings"
2010,ASTM,"F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe"
2009,ASTM,"F2718-09 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines"
2009,ASTM,"F2719-09 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed  in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines"
2009,ASTM,"F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe"
2010,ASTM,"F2736-10 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe"
2009,ASTM,"F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2010,ASTM,"F876-10 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2010,ASTM,"F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2010,ASTM,"D2412-10 Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2010,ASTM,"F1057-10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2010,ASTM,"F1901-10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2010,ASTM,"F1960-10 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2010,ASTM,"F2023-10 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2010,ASTM,"F477-10 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2010,ASTM,"F493-10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
2010,ASTM,"F610/F610M-10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2010,ASTM,"F656-10 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2007,ASTM,"D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings (Redline)"
2005,ASTM,"D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Redline)"
2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems (Redline)"
2006,ASTM,"F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Redline)"
2009,ASTM,"F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing (Redline)"
2009,ASTM,"F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing (Redline)"
2009,ASTM,"F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing (Redline)"
2009,ASTM,"F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe (Redline)"
1996,ASTM,"D2235-96a Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
1999,ASTM,"D2239-99 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2004,ASTM,"D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2010,ASTM,"D2412-10a Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2004,ASTM,"D2513-04a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D3035-10  Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2009,ASTM,"F1488-09e1 Standard Specification for Coextruded Composite Pipe"
1999,ASTM,"F1807-99 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1974-04 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2010,ASTM,"F714-10 Standard Specification for  Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2008,ASTM,"F876-08 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2011,ASTM,"D2513-11 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D2665-10 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2010,ASTM,"D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2235-04(2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2011,ASTM,"D2412-11 Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2011,ASTM,"D2513-11a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"D2661-11 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2665-11 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2837-11 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2009,ASTM,"D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2011,ASTM,"D3138-04(2011) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2011,ASTM,"D3311-11 Standard Specification for  Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2011,ASTM,"F1290-98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2011,ASTM,"F1417-11 Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air"
2011,ASTM,"F1807-11 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F1807-11ae1 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F1960-11 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2011,ASTM,"F1960-11e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2011,ASTM,"F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F645-11 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems"
2011,ASTM,"F877-11 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems"
2007,ASTM,"F412-07 Standard Terminology Relating to  Plastic Piping Systems"
2006,ASTM,"F412-06 Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01ae1 Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01a Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01 Standard Terminology Relating to Plastic Piping Systems"
2000,ASTM,"F412-00 Standard Terminology Relating to Plastic Piping Systems"
2002,ASTM,"F438-02e1 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2011,ASTM,"F439-11 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F439-02e1 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F441/F441M-99e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2002,ASTM,"F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2002,ASTM,"F477-02e1 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2006,ASTM,"F480-06be1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F480-02e1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2001,ASTM,"F512-95(2001)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2000,ASTM,"F585-94(2000) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2009,ASTM,"F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2005,ASTM,"F610/F610M-00a(2005) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2000,ASTM,"F610/F610M-00a Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2006,ASTM,"F628-06e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
1997,ASTM,"F689-97 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2008,ASTM,"F725-03(2008)e1 Standard Practice for  Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2003,ASTM,"F725-03e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2003,ASTM,"F725-03 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
1996,ASTM,"F725-89(1996) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2007,ASTM,"F758-95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage"
1999,ASTM,"F771-99e1 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2010,ASTM,"F876-10e1 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01e2 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"F877-11a Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2001,ASTM,"F877-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2000,ASTM,"F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2011,ASTM,"F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints"
1996,ASTM,"F905-96 Standard Practice for Qualification of Polyethylene Saddle Fusion Joints"
2002,ASTM,"F913-02e1 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2002,ASTM,"F913-02 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
1995,ASTM,"F913-95 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2011,ASTM,"F948-94(2011) Standard Test Method for  Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2001,ASTM,"F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2001,ASTM,"F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
1994,ASTM,"F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2011,ASTM,"F1025-94(2011) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2000,ASTM,"F1025-94(2000) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2002,ASTM,"F1041-02 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
1995,ASTM,"F1041-95 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2011,ASTM,"F1055-11 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing"
1998,ASTM,"F1055-98e1 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2011,ASTM,"F1056-04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
1997,ASTM,"F1056-97 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
2008,ASTM,"F1216-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07b Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07a Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2006,ASTM,"F1216-06 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2005,ASTM,"F1216-05 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2003,ASTM,"F1216-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
1998,ASTM,"F1216-98 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2011,ASTM,"F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1281-03e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2002,ASTM,"F1281-02e2 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2002,ASTM,"F1281-02e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1282-03e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2002,ASTM,"F1282-02e2 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2002,ASTM,"F1282-02e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
1999,ASTM,"D1527-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2002,ASTM,"F1336-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2000,ASTM,"F1336-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2005,ASTM,"F1365-91(2005) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
1999,ASTM,"F1365-91(1999)e1 Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
2008,ASTM,"D1598-02(2008) Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2002,ASTM,"D1598-02 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2011,ASTM,"D1599-99(2011) Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings"
1999,ASTM,"D1599-99e1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings"
1999,ASTM,"D1599-99 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings"
2001,ASTM,"F1412-01e1 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air (Redline)"
2005,ASTM,"F1429-99(2005) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
1999,ASTM,"F1429-99 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
2011,ASTM,"F1473-11 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2001,ASTM,"F1473-01e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2001,ASTM,"F1473-01 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
1997,ASTM,"F1473-97e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
1998,ASTM,"F1483-98 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2000,ASTM,"F1488-00e1 Standard Specification for Coextruded Composite Pipe"
2000,ASTM,"F1498-00e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2000,ASTM,"F1498-00 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2010,ASTM,"F1504-10 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1997,ASTM,"F1504-97e2 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1997,ASTM,"F1504-97e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
2001,ASTM,"F1533-01 Standard Specification for Deformed Polyethylene (PE) Liner"
1997,ASTM,"F1533-97 Standard Specification for Deformed Polyethylene (PE) Liner"
1997,ASTM,"F1545-97e1 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2003,ASTM,"F1545-97(2003) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
1997,ASTM,"F1545-97 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2011,ASTM,"F1563-01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2001,ASTM,"F1563-01 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2000,ASTM,"F1563-94(2000) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2011,ASTM,"F1588-96(2011) Standard Test Method for  Constant Tensile Load Joint Test (CTLJT)"
2002,ASTM,"F1588-96(2002) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
1996,ASTM,"F1588-96 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2011,ASTM,"F1674-11 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
1996,ASTM,"F1674-96 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
2003,ASTM,"F1675-03 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
1996,ASTM,"F1675-96 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
2009,ASTM,"F1697-09 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2008,ASTM,"F1697-08e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2008,ASTM,"F1697-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2007,ASTM,"F1697-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2002,ASTM,"F1697-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
1996,ASTM,"F1697-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1698-02 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1698-96 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1732-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material"
1996,ASTM,"F1733-96e1 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2002,ASTM,"F1733-96(2002) Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
1996,ASTM,"F1733-96 Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2003,ASTM,"F1734-03 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
1996,ASTM,"F1734-96 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2002,ASTM,"F1735-02e1 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2008,ASTM,"F1735-02(2008)  Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2002,ASTM,"F1735-02 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1735-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2007,ASTM,"F1741-07 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2005,ASTM,"F1741-05 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02ae1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02a Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1741-01e1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1741-01 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
1996,ASTM,"F1741-96 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2003,ASTM,"F1743-96(2003) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
1996,ASTM,"F1743-96 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2011,ASTM,"F1760-01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
2005,ASTM,"F1760-01(2005)e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
2001,ASTM,"F1760-01 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
1997,ASTM,"F1760-97 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
1998,ASTM,"D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2004,ASTM,"D2122-98(2004) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
1998,ASTM,"D2122-98 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2003,ASTM,"D2152-95(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
1995,ASTM,"D2152-95 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
2010,ASTM,"F1802-04(2010) Standard Test Method for Performance Testing of Excess Flow Valves"
2004,ASTM,"F1803-04 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
1997,ASTM,"F1803-97 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
2010,ASTM,"F1807-10e1 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2007,ASTM,"F1807-07ae1 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1865-02e1 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1865-02a(2009) Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1865-02a Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1865-02 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1867-98(2004) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1867-98 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2011,ASTM,"F1871-11 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2002,ASTM,"F1871-02 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1871-98e2 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1871-98e1 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2004,ASTM,"D2290-04 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2000,ASTM,"D2290-00e1 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2000,ASTM,"D2290-00 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2004,ASTM,"F1901-98(2004) Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
1998,ASTM,"F1901-98 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2004,ASTM,"D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2001,ASTM,"F1924-01e1 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2001,ASTM,"F1924-01 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2010,ASTM,"F1947-10 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
1998,ASTM,"F1947-98 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
2011,ASTM,"F1948-05(2011) Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
1999,ASTM,"F1948-99ae1 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
1999,ASTM,"F1948-99a Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2000,ASTM,"F1960-00e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02e1 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"F1962-11 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2005,ASTM,"F1962-05e1 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2005,ASTM,"F1962-05 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
1999,ASTM,"F1962-99 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2001,ASTM,"F1970-01 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
1999,ASTM,"F1970-99 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
1999,ASTM,"F1973-99e2 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
1999,ASTM,"F1973-99e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
2001,ASTM,"F1974-01e2 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2001,ASTM,"F1974-01e1 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2010,ASTM,"D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
1999,ASTM,"D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
2011,ASTM,"F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2011,ASTM,"F1987-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems"
1999,ASTM,"D2464-99e1 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"F1987-01 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2000,ASTM,"F1987-00a Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2004,ASTM,"D2467-04e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2010,ASTM,"F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2000,ASTM,"F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2000,ASTM,"F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2011,ASTM,"F2019-11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in  Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting  Resin Pipe (CIPP)"
2003,ASTM,"F2019-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2000,ASTM,"F2019-00 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2011,ASTM,"F2021-11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems"
2011,ASTM,"D2513-11c Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2000,ASTM,"F2021-00 Standard Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems"
2011,ASTM,"D2513-11e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"D2513-11b Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"F2023-09 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2008,ASTM,"F2023-08 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2005,ASTM,"F2023-05 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2004,ASTM,"F2023-04 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2003,ASTM,"F2023-03e1 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2003,ASTM,"F2023-03 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2000,ASTM,"F2023-00 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2007,ASTM,"D2513-07be1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2001,ASTM,"D2513-01ae1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"D2564-04(2009)e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2004,ASTM,"D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2004,ASTM,"F2098-04e1 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
1997,ASTM,"D2661-97ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04ae2 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"F2135-01 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2005,ASTM,"F2136-05 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2001,ASTM,"F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2001,ASTM,"F2136-01 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2001,ASTM,"F2138-01e1 Standard Specification for Excess Flow Valves for Natural Gas Service"
2001,ASTM,"F2138-01 Standard Specification for Excess Flow Valves for Natural Gas Service"
2007,ASTM,"F2145-01(2007) Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing"
2001,ASTM,"F2145-01 Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing"
2001,ASTM,"F2158-01 Standard Specification for Residential Central-Vacuum Tube and Fittings"
2003,ASTM,"F2159-03e1 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2008,ASTM,"F2160-08 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2005,ASTM,"F2160-05 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2001,ASTM,"F2160-01 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2010,ASTM,"F2164-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2002,ASTM,"F2164-02 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2002,ASTM,"F2165-02 Standard Specification for Flexible Pre-Insulated Piping"
2002,ASTM,"F2176-02 Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct"
2011,ASTM,"F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2002,ASTM,"F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2002,ASTM,"F2207-02 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe"
2002,ASTM,"F2231-02e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2002,ASTM,"F2231-02 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2004,ASTM,"D2774-04e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2007,ASTM,"F2263-07e1 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2007,ASTM,"F2263-07 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2003,ASTM,"F2263-03 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2004,ASTM,"D2837-04e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2001,ASTM,"D2837-01ae1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2011,ASTM,"F2306/F2306M-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2005,ASTM,"F2306/F2306M-05 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
1999,ASTM,"D2846/D2846M-99e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"D2852-95(2002) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
1995,ASTM,"D2852-95 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2004,ASTM,"F2331-04 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials"
2007,ASTM,"F2389-07e1 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2009,ASTM,"F2418-09 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2005,ASTM,"F2418-05 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2004,ASTM,"F2418-04 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2005,ASTM,"F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness"
2001,ASTM,"D2949-01ae1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2949-01a(2008)e1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2005,ASTM,"F2434-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2005,ASTM,"F2435-05 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2006,ASTM,"F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines"
2006,ASTM,"F2510/F2510M-06 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes"
2011,ASTM,"F2536-06b(2011) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2006,ASTM,"F2536-06 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2006,ASTM,"F2561-06 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2007,ASTM,"F2562/F2562M-07 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage"
2006,ASTM,"F2599-06 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner"
2006,ASTM,"F2600-06 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing"
2011,ASTM,"F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe"
2007,ASTM,"F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe"
2011,ASTM,"F2620-11 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2009,ASTM,"F2620-09e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2009,ASTM,"F2620-09 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2006,ASTM,"F2620-06 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2010,ASTM,"F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method"
2011,ASTM,"F2648/F2648M-11 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2010,ASTM,"F2648/F2648M-10 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2007,ASTM,"F2648/F2648M-07 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2008,ASTM,"F2649-08 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks"
2002,ASTM,"D3122-95(2002) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
1995,ASTM,"D3122-95 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2008,ASTM,"F2720/F2720M-08 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe"
2008,ASTM,"F2735-08a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2008,ASTM,"F2735-08 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"D3139-98(2011) Standard Specification for  Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2011,ASTM,"F2561-11 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2011,ASTM,"F2599-11 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner"
2003,ASTM,"D3212-96a(2003)e1 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2011,ASTM,"F2620-11e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2011,ASTM,"F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type"
2011,ASTM,"F2263-07(2011) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2011,ASTM,"F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials"
2011,ASTM,"F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials (Redline)"
2002,ASTM,"D3311-02e1 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2004,ASTM,"D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
1995,ASTM,"D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe"
2010,ASTM,"D6070-02(2010) Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
1998,ASTM,"D6070-98 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2005,ASTM,"F442/F442M-99(2005)e1 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
1997,ASTM,"F481-97 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
1995,ASTM,"F645-95 Standard Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems"
2011,ASTM,"F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2006,ASTM,"F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2005,ASTM,"F1674-05 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
2003,ASTM,"F1804-03 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2011,ASTM,"F1924-05(2011) Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2001,ASTM,"F1986-01 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2004,ASTM,"F2080-04 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2005,ASTM,"F2263-05 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2011,ASTM,"F2418-11 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2002,ASTM,"F438-02 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2002,ASTM,"F1281-02e3 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"D2235-01 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2001,ASTM,"D2239-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2012,ASTM,"F1732-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material "
2012,ASTM,"D2513-12a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F667-12 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2012,ASTM,"F645-12 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems "
2012,ASTM,"D1785-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 "
2012,ASTM,"D2239-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter "
2012,ASTM,"F1867-06(2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2012,ASTM,"F2138-12 Standard Specification for Excess Flow Valves for Natural Gas Service"
2012,ASTM,"F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2012,ASTM,"D2737-12e1 Standard Specification for  Polyethylene (PE) Plastic Tubing "
2012,ASTM,"F714-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter "
2012,ASTM,"F2509-06(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled  Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) "
2012,ASTM,"F2418-12 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2012,ASTM,"F2657-07(2012) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing"
2012,ASTM,"F412-12 Standard Terminology Relating to  Plastic Piping Systems "
2012,ASTM,"F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
2012,ASTM,"F480-12 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 "
2012,ASTM,"F667-12 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)"
2012,ASTM,"F714-12e1 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2012,ASTM,"F1948-12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2012,ASTM,"F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"D2665-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings "
2012,ASTM,"D2513-12 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"D2737-12 Standard Specification for  Polyethylene (PE) Plastic Tubing "
2012,ASTM,"D2774-12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping "
2012,ASTM,"F409-12 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2012,ASTM,"F439-12 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2012,ASTM,"F441/F441M-12 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2012,ASTM,"F442/F442M-12 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2012,ASTM,"F512-12 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2012,ASTM,"F714-12a Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2012,ASTM,"F1483-12 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2012,ASTM,"F1804-08(2012) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2012,ASTM,"F1807-12 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2012,ASTM,"F1960-12 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2012,ASTM,"D2513-12ae1 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2080-12 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene (PEX) Pipe"
2012,ASTM,"D2564-12 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
2012,ASTM,"D2737-12a Standard Specification for  Polyethylene (PE) Plastic Tubing"
2012,ASTM,"F2435-12 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2012,ASTM,"F2620-12 Standard Practice for  Heat Fusion Joining of Polyethylene Pipe and Fittings"
2012,ASTM,"D3035-12e1 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2012,ASTM,"D3261-12 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2012,ASTM,"F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2012,ASTM,"F1970-12 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2010,ASTM,"F2164-10e1 Standard Practice for  Field Leak Testing of Polyethylene (PE) Pressure Piping Systems   Using Hydrostatic Pressure"
2012,ASTM,"F2487-06(2012) Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene Pipelines"
2012,ASTM,"F2509-12 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"D5813-04(2012) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2012,ASTM,"D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2012,ASTM,"D3035-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2005,ASTM,"F1057-87(2005) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
2000,ASTM,"F1057-87(2000) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
1997,ASTM,"F1802-97 Standard Test Method for Performance Testing of Excess Flow Valves"
1997,ASTM,"F1804-97 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2002,ASTM,"D2749-02 Standard Symbols for Dimensions of Plastic Pipe Fittings"
1999,ASTM,"D2749-92(1999)e1 Standard Symbols for Dimensions of Plastic Pipe Fittings"
2004,ASTM,"F2331-04e1 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic   Threaded Pipe and Fittings Materials"
2012,ASTM,"F628-12e1 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
1977,ASTM,"F405-77ae1 Standard Specification for Corrugated Polyethylene (PE) Tubing And Fittings"
2013,ASTM,"F412-13 Standard Terminology Relating to  Plastic Piping Systems"
2012,ASTM,"F628-12 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
1991,ASTM,"F628-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core"
1979,ASTM,"F628-79e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe Having A Foam Core"
2013,ASTM,"F645-13 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2012,ASTM,"F645-12a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields (Redline)"
2013,ASTM,"F876-13 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F1055-13 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2012,ASTM,"F1055-12 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing"
2012,ASTM,"F1973-12 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2013,ASTM,"F2164-13 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2013,ASTM,"F2306/F2306M-13 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2012,ASTM,"F2390-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2013,ASTM,"F2510/F2510M-07(2013) Standard Specification for  Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated High Density Polyethylene Drainage Pipes"
2013,ASTM,"F2648/F2648M-13 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2013,ASTM,"F2658-07(2013) Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer  Pipe and Fittings"
2012,ASTM,"F2736-12 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2013,ASTM,"F442/F442M-13 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2013,ASTM,"F1733-13 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing"
2013,ASTM,"F1807-13 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2013,ASTM,"F1973-13 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2013,ASTM,"F2145-13 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2013,ASTM,"F441/F441M-13 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2013,ASTM,"F714-13 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
1988,ASTM,"D2235-88 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2012,ASTM,"D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe"
1974,ASTM,"D2321-74 Recommended Practice for Underground Installation Of Flexible Thermoplastic Sewer Pipe"
2013,ASTM,"D2467-13 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
1999,ASTM,"D2513-99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
1991,ASTM,"D2564-91a Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems"
1991,ASTM,"D2564-91 Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems"
1991,ASTM,"D2661-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
1978,ASTM,"D2661-78 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe And Fittings"
1991,ASTM,"D2665-91b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1991,ASTM,"D2665-91a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1991,ASTM,"D2665-91 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1978,ASTM,"D2665-78 Standard Specification for Poly(inyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings"
2010,ASTM,"D2683-10e1 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
1978,ASTM,"D2729-78e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe And Fittings"
2013,ASTM,"D2749-13 Standard Symbols for  Dimensions of Plastic Pipe Fittings"
2013,ASTM,"D2749-13 Standard Symbols for  Dimensions of Plastic Pipe Fittings (Redline)"
1977,ASTM,"D2751-77ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe And Fittings"
1978,ASTM,"D2949-78 Standard Specification for 3.25- In. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings"
2013,ASTM,"D3212-07(2013) Standard Specification for  Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
1992,ASTM,"D3311-92 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2013,ASTM,"D2464-13 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2013,ASTM,"D2513-13 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2013,ASTM,"D2152-13 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2003,ASTM,"F690-86(2003)e2 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
2003,ASTM,"F690-86(2003)e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
2003,ASTM,"F690-86(2003) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
1994,ASTM,"F690-86(1994) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
1997,ASTM,"D1598-97 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2008,ASTM,"F1498-08 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings (Redline)"
1995,ASTM,"F1606-95 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner (Withdrawn 2004)"
2002,ASTM,"F1871-02e1 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation (Withdrawn 2011)"
2001,ASTM,"D2513-01a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2013,ASTM,"F441/F441M-13e1 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2013,ASTM,"F442/F442M-13e1 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2013,ASTM,"F405-13 Standard Specification for  Corrugated Polyethylene (PE) Pipe and Fittings"
2013,ASTM,"F405-13 Standard Specification for  Corrugated Polyethylene (PE) Pipe and Fittings (Redline)"
2013,ASTM,"F439-13 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2013,ASTM,"F585-13 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2013,ASTM,"F679-13 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2013,ASTM,"D2466-13 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2013,ASTM,"D2467-13a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
1987,ASTM,"D2513-87 Standard Specification for Thermoplastic Gas Pressure Piping Systems"
1992,ASTM,"D2846-92a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1992,ASTM,"D2846-92 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2001,ASTM,"F913-01 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2001,ASTM,"F1336-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
1997,ASTM,"F1504-97 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1865-98 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
1998,ASTM,"F1871-98 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1999,ASTM,"F1961-99 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F725-03(2013) Standard Practice for  Drafting Impact Test Requirements In Thermoplastic Pipe And  Fittings Standards"
2013,ASTM,"F876-13a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F894-13 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe"
2013,ASTM,"F1365-91(2013) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2013,ASTM,"F1473-13 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2013,ASTM,"F1675-13 Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2013,ASTM,"F1675-13 Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits (Redline)"
2013,ASTM,"F1807-13a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2013,ASTM,"F1866-13 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2012,ASTM,"F1970-12e1 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2013,ASTM,"F2207-06(2013) Standard Specification for  Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2013,ASTM,"F2231-02(2013) Standard Test Method for  Charpy Impact Test on Thin Specimens of Polyethylene Used in  Pressurized Pipes"
2013,ASTM,"F2418-13 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2013,ASTM,"F2433-05(2013) Standard Test Method for  Determining Thermoplastic Pipe Wall Stiffness"
2001,ASTM,"D2104-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40"
1999,ASTM,"D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)"
2001,ASTM,"D2447-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter"
1996,ASTM,"D3309-96a Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems"
2000,ASTM,"F699-00 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing"
2001,ASTM,"F1176-01 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi"
1998,ASTM,"F1335-98 Standard Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service"
1995,ASTM,"F1589-95 Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe"
1998,ASTM,"F1474-98 Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe"
1993,ASTM,"F1176-93 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi"
1999,ASTM,"D2104-99e1 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40"
1999,ASTM,"D2447-99 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter"
1997,ASTM,"D3485-97 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2002,ASTM,"F1380-95a(2002) Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing"
1998,ASTM,"F1335-98e1 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service"
1999,ASTM,"D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)"
2013,ASTM,"F2023-13 Standard Test Method for  Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Tubing and Systems to Hot Chlorinated Water"
2013,ASTM,"F2165-13 Standard Specification for  Flexible Pre-Insulated Piping"
2013,ASTM,"F2487-13 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2013,ASTM,"F2736-13 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2013,ASTM,"F2736-13 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe (Redline)"
2013,ASTM,"D2837-13 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2013,ASTM,"F2619/F2619M-13 Standard Specification for  High-Density Polyethylene (PE) Line Pipe"
2013,ASTM,"F2620-13 Standard Practice for  Heat Fusion Joining of Polyethylene Pipe and Fittings"
2014,ASTM,"D3035-14 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2014,ASTM,"F480-14 Standard Specification for  Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios (SDR), SCH 40 and SCH 80"
2014,ASTM,"F480-14 Standard Specification for  Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios (SDR), SCH 40 and SCH 80 (Redline)"
2014,ASTM,"D3034-14 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2014,ASTM,"D2513-14 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2080-12e1 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene (PEX) Pipe"
2014,ASTM,"D2513-14e1 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2014,ASTM,"D2665-14 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings"
2014,ASTM,"D3035-14a Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2014,ASTM,"D2321-14 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2014,ASTM,"F2263-14 Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe   to Chlorinated Water (Redline)"
2014,ASTM,"F449-02(2014) Standard Practice for  Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2014,ASTM,"D2321-14e1 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2014,ASTM,"F2649-14 Standard Specification for  Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks"
2014,ASTM,"F2649-14 Standard Specification for  Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks (Redline)"
2014,ASTM,"F1606-05(2014) Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  (PE) Liner"
2014,ASTM,"D3034-14a Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2014,ASTM,"D2680-01(2014) Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride)   (PVC) Composite Sewer Piping"
2014,ASTM,"F481-97(2014) Standard Practice for  Installation of Thermoplastic Pipe and Corrugated Pipe in Septic  Tank Leach Fields"
2014,ASTM,"F794-03(2014) Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter"
2014,ASTM,"F477-14 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe (Redline)"
2014,ASTM,"F2686-14 Standard Specification for  Glass Fiber Reinforced Thermoplastic Pipe (Redline)"
2013,ASTM,"F2736-13e1 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2014,ASTM,"D2846/D2846M-14 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2014,ASTM,"F1807-14a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"F1807-14 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"F2159-14 Standard Specification for  Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"F2434-14 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing"
2014,ASTM,"F2263-14 Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe   to Chlorinated Water"
2014,ASTM,"F1960-14 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2014,ASTM,"D1599-14 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2014,ASTM,"F477-14 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2014,ASTM,"F2686-14 Standard Specification for  Glass Fiber Reinforced Thermoplastic Pipe"
2014,ASTM,"D2683-14 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2014,ASTM,"F493-14 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2014,ASTM,"F758-14 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2014,ASTM,"F1504-14 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2014,ASTM,"F2618-09(2014) Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2014,ASTM,"F2306/F2306M-14 Standard Specification for  12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2014,ASTM,"D2661-14 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2014,ASTM,"D2609-14 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2014,ASTM,"F1960-14a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2014,ASTM,"F1429-99(2014) Standard Test Method for  Assembly Force of Plastic Underground Conduit Joints That Use  Flexible Elastomeric Seals Located in the Bell"
2014,ASTM,"D2672-14 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
2015,ASTM,"F1545-15 Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2015,ASTM,"D3035-15 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2015,ASTM,"F1807-15 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"D1599-14e1 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2015,ASTM,"D3485-15 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC)"
2015,ASTM,"F667/F667M-15 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2015,ASTM,"F1960-15 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2015,ASTM,"F1545-15a Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2015,ASTM,"F1545-15a Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Redline)"
2014,ASTM,"F2306/F2306M-14e1 Standard Specification for  12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2015,ASTM,"D2467-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
2015,ASTM,"F610/F610M-15 Standard Practice for  Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique"
2015,ASTM,"F1697-09(2015) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2015,ASTM,"F1698-02(2015) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2015,ASTM,"F2718-09(2015) Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated  Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation  of Water Pipelines"
2015,ASTM,"F2719-09(2015) Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar   Formed  in Place Lining System (FIPLS) for the Rehabilitation of  Water  Pipelines"
2015,ASTM,"F1735-09(2015) Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits"
2015,ASTM,"F679-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2015,ASTM,"F949-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2015,ASTM,"F645-15 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2015,ASTM,"F412-15 Standard Terminology Relating to  Plastic Piping Systems"
2015,ASTM,"D2609-15 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2015,ASTM,"F437-15 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80"
2015,ASTM,"F438-15 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2015,ASTM,"D2466-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2015,ASTM,"D2464-15 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2015,ASTM,"F645-15a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2015,ASTM,"F2562/F2562M-15 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage"
2015,ASTM,"D3122-15 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2015,ASTM,"D1785-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2015,ASTM,"F656-15 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings"
2015,ASTM,"F2080-15 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene (PEX) Pipe"
2015,ASTM,"F2389-15 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2015,ASTM,"F2435-15 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2015,ASTM,"F876-15 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F2158-08(2013) Standard Specification for  Residential Central-Vacuum Tube and Fittings"
2013,ASTM,"F2600-09(2013) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2013,ASTM,"F1973-13e1 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2012,ASTM,"D3035-12e2 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2012,ASTM,"D3261-12e1 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2010,ASTM,"D2683-10e2 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2013,ASTM,"D2837-13e1 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2013,ASTM,"F679-13a Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2010,ASTM,"D2683-10e3 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2014,ASTM,"F913-02(2014) Standard Specification for Thermoplastic Elastomeric Seals &#40;Gaskets&#41; for Joining<brk/> Plastic   Pipe"
2015,ASTM,"F2618-15 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2015,ASTM,"F441/F441M-15 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2015,ASTM,"F1417-11a(2015) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2015,ASTM,"F1588-96(2015) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2015,ASTM,"F1974-09(2015) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2015,ASTM,"F876-15a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2015,ASTM,"F2634-15 Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method"
2015,ASTM,"F2634-15 Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method (Redline)"
2015,ASTM,"F1803-15 Standard Specification for  Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and   Fittings Based on Controlled Inside Diameter&#x2009;"
2015,ASTM,"F1483-15 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2015,ASTM,"D2657-07(2015) Standard Practice for  Heat Fusion Joining of Polyolefin Pipe and Fittings"
2015,ASTM,"F2136-08(2015) Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2015,ASTM,"F2509-15 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing"
2015,ASTM,"F2509-15 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing (Redline)"
2015,ASTM,"F1336-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2015,ASTM,"D1598-15 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2015,ASTM,"D1598-15a Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2015,ASTM,"F2080-15a Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe"
2015,ASTM,"F1055-15 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2015,ASTM,"F2023-15 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water"
2015,ASTM,"D2855-15 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets"
2015,ASTM,"D3261-15 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2016,ASTM,"D3311-11(2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2016,ASTM,"F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact   with Thermoplastic Pipe and Fittings Materials"
2015,ASTM,"F1948-15 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2015,ASTM,"F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing to Metal Insert and Plastic Insert Fittings"
2016,ASTM,"F667/F667M-16 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2016,ASTM,"F667/F667M-16 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)"
2015,ASTM,"D3034-15 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2016,ASTM,"D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings (Redline)"
2016,ASTM,"F1412-16 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2016,ASTM,"F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2012,ASTM,"F628-12e2 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2015,ASTM,"D3034-15e1 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"F2599-16 Standard Practice for  The Sectional Repair of Damaged Pipe By Means of An Inverted   Cured-In-Place Liner"
2015,ASTM,"F1802-15 Standard Test Method for  Performance Testing of Excess Flow Valves"
2016,ASTM,"F2561-16 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2016,ASTM,"F1041-02(2016) Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2016,ASTM,"F2735-09(2016) Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2016,ASTM,"F1741-08(2016) Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2016,ASTM,"F1743-08(2016) Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2016,ASTM,"F2418-16 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2016,ASTM,"F1760-16 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic   Pipe Having Reprocessed-Recycled Content"
2015,ASTM,"D2122-15 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2016,ASTM,"F2418-16a Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2016,ASTM,"F412-16 Standard Terminology Relating to  Plastic Piping Systems"
2016,ASTM,"F1473-16 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2016,ASTM,"F1216-16 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2016,ASTM,"F1901-16 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2016,ASTM,"F1668-16 Standard Guide for  Construction Procedures for Buried Plastic Pipe"
2016,ASTM,"F1668-16 Standard Guide for  Construction Procedures for Buried Plastic Pipe (Redline)"
2016,ASTM,"F1055-16 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2016,ASTM,"F2080-16 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2016,ASTM,"F1673-10(2016) Standard Specification for  Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2016,ASTM,"F1804-08(2016) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2016,ASTM,"D2122-16 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2016,ASTM,"D3261-16 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2016,ASTM,"D2235-04(2016) Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2016,ASTM,"D3138-04(2016) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2016,ASTM,"D2290-16 Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2016,ASTM,"F679-16 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2016,ASTM,"D3034-16 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"F2160-16 Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2016,ASTM,"F585-16 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2016,ASTM,"F585-16 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers (Redline)"
2016,ASTM,"F412-16a Standard Terminology Relating to  Plastic Piping Systems"
2016,ASTM,"F1055-16a Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2016,ASTM,"F1055-16a Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing (Redline)"
2017,ASTM,"F2389-17 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2016,ASTM,"D2513-16 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2014,ASTM,"F2623-14 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2014,ASTM,"F2206-14 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE)"
2014,ASTM,"F1488-14 Standard Specification for  Coextruded Composite Pipe"
2015,ASTM,"D2241-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2016,ASTM,"F891-16 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core"
2017,ASTM,"F1807-17 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2017,ASTM,"F1743-17 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2017,ASTM,"F2135-01(2017) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2016,ASTM,"D2513-16a Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2017,ASTM,"F412-17 Standard Terminology Relating to  Plastic Piping Systems"
2017,ASTM,"F2389-17a Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2017,ASTM,"F1282-17 Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2017,ASTM,"F2135-01(2017)e1 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2017,ASTM,"F1057-17 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2017,ASTM,"F512-12(2017) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2017,ASTM,"F409-17 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2015,ASTM,"F1698-02(2015)e1 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2017,ASTM,"D2846/D2846M-17 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"F412-17a Standard Terminology Relating to  Plastic Piping Systems"
2017,ASTM,"D2466-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2017,ASTM,"F1281-17 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2017,ASTM,"F438-17 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2017,ASTM,"F1675-13(2017) Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2017,ASTM,"D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2017,ASTM,"F1866-13(2017) Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2017,ASTM,"F2138-12(2017) Standard Specification for Excess Flow Valves for Natural Gas Service"
2017,ASTM,"F2390-12(2017) Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2017,ASTM,"F2176-17 Standard Specification for  Mechanical Couplings Used on Polyethylene Conduit, Duct and  Innerduct"
2017,ASTM,"F2176-17 Standard Specification for  Mechanical Couplings Used on Polyethylene Conduit, Duct and  Innerduct (Redline)"
2017,ASTM,"F1483-17 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2017,ASTM,"D2846/D2846M-17a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"F876-17 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2017,ASTM,"D2729-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2017,ASTM,"F2487-13(2017) Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2017,ASTM,"F2021-17 Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems"
2017,ASTM,"F2021-17 Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems (Redline)"
2017,ASTM,"F2536-17 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2017,ASTM,"F2536-17 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs (Redline)"
2017,ASTM,"F1499-17 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2017,ASTM,"D2152-17 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2017,ASTM,"F2561-17 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2017,ASTM,"D2846/D2846M-17b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"F2648/F2648M-17 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall   Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2017,ASTM,"F2510/F2510M-17 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes"
2017,ASTM,"D2444-17 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2018,ASTM,"F2136-18 Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2014,ASTM,"D2661-14e1 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2015,ASTM,"D1785-15e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2014,ASTM,"F1488-14e1 Standard Specification for  Coextruded Composite Pipe"
2017,ASTM,"D2846/D2846M-17be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2018,ASTM,"F1473-18 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2018,ASTM,"F1973-13(2018) Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2018,ASTM,"F2145-13(2018) Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2018,ASTM,"F810-12(2018) Standard Specification for  Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste  Disposal Absorption Fields"
2018,ASTM,"F905-04(2018) Standard Practice for  Qualification of Polyethylene Saddle-Fused Joints"
2018,ASTM,"F1365-91(2018) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2018,ASTM,"F2600-09(2018) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2018,ASTM,"F1759-97(2018) Standard Practice for  Design of High-Density Polyethylene (HDPE) Manholes for Subsurface  Applications"
2018,ASTM,"F1866-18 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2018,ASTM,"F1056-18 Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings"
2018,ASTM,"F645-18 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"F645-18a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"F877-18 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2018,ASTM,"F2159-18 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"D2321-18 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2018,ASTM,"F1697-18 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2018,ASTM,"F1697-18 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit (Redline)"
2018,ASTM,"F1741-18 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2018,ASTM,"D2513-18 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F2433-05(2018) Standard Test Method for  Determining Thermoplastic Pipe Wall Stiffness"
2018,ASTM,"D2412-11(2018) Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading"
2018,ASTM,"F402-18 Standard Practice for  Safe Handling of Solvent Cements, Primers, and Cleaners Used   for Joining Thermoplastic Pipe and Fittings"
2018,ASTM,"F402-18 Standard Practice for  Safe Handling of Solvent Cements, Primers, and Cleaners Used   for Joining Thermoplastic Pipe and Fittings (Redline)"
2018,ASTM,"F2164-18 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2018,ASTM,"D2564-12(2018) Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
2018,ASTM,"F725-03(2018) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And  Fittings Standards"
2018,ASTM,"F2261-06(2018) Standard Test Method for  Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule  40 and 80 Socket-Type."
2018,ASTM,"F2657-07(2018) Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing"
2018,ASTM,"D2513-18a Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F877-18a Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2018,ASTM,"D1599-18 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2018,ASTM,"D1599-18 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings (Redline)"
2018,ASTM,"F1807-18 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"D5813-04(2018) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2018,ASTM,"F2306/F2306M-18 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2018,ASTM,"F1960-18 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2018,ASTM,"F1732-12(2018) Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing   Recycled PVC Material"
2012,ASTM,"F628-12e3 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2018,ASTM,"F1960-18a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2018,ASTM,"F1807-18a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"F2735-18 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2018,ASTM,"F2159-18a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"F2080-18 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2018,ASTM,"F2434-18 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing"
2018,ASTM,"F1674-18 Standard Test Method for  Joint Restraint Products for Use with PVC Pipe"
2018,ASTM,"F1674-18 Standard Test Method for  Joint Restraint Products for Use with PVC Pipe (Redline)"
2018,ASTM,"F645-18b Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"F645-18b Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems (Redline)"
2018,ASTM,"D2949-18 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings"
2019,ASTM,"F412-19 Standard Terminology Relating to  Plastic Piping Systems"
2019,ASTM,"F2206-19 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE)"
2019,ASTM,"F2206-19 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE) (Redline)"
2019,ASTM,"F1290-19 Standard Practice for  Electrofusion Joining Polyolefin Pipe and Fittings"
2019,ASTM,"F1290-19 Standard Practice for  Electrofusion Joining Polyolefin Pipe and Fittings (Redline)"
2019,ASTM,"F2618-19 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2019,ASTM,"F2165-19 Standard Specification for Flexible Pre-Insulated Plastic Piping"
2019,ASTM,"F2165-19 Standard Specification for Flexible Pre-Insulated Plastic Piping (Redline)"
2018,ASTM,"F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT)  to Metal Insert and Plastic Insert Fittings"
2018,ASTM,"F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT)  to Metal Insert and Plastic Insert Fittings (Redline)"
2019,ASTM,"F1734-19 Standard Practice for  Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off   Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2019,ASTM,"D2290-19 Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2019,ASTM,"F1488-14(2019) Standard Specification for  Coextruded Composite Pipe"
2019,ASTM,"F2263-14(2019) Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe   to Chlorinated Water"
2019,ASTM,"F2649-14(2019) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks"
2019,ASTM,"D2846/D2846M-19 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2018,ASTM,"F1871-18 Standard Specification for  Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation"
2019,ASTM,"F2620-19 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2019,ASTM,"F2658-07(2019) Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer  Pipe and Fittings"
2019,ASTM,"F894-19 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe"
2019,ASTM,"F1057-19 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2019,ASTM,"F2306/F2306M-19 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2019,ASTM,"F1970-19 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2019,ASTM,"F1807-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F2159-19 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"D2846/D2846M-19a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2019,ASTM,"F2623-19 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2019,ASTM,"F876-19 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2019,ASTM,"F481-97(2019) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic  Tank Leach Fields"
2019,ASTM,"F1803-15(2019) Standard Specification for  Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and   Fittings Based on Controlled Inside Diameter&#x2009;"
2019,ASTM,"F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in  Pressurized Pipes"
2019,ASTM,"F2509-15(2019) Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing"
2019,ASTM,"F2207-06(2019) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2019,ASTM,"F876-19a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2019,ASTM,"F1960-19 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2019,ASTM,"D2513-19 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2019,ASTM,"F1924-19 Standard Specification for  Plastic Mechanical Fittings for Use on Outside Diameter Controlled   Polyethylene Gas Distribution Pipe and Tubing"
2019,ASTM,"F1924-19 Standard Specification for  Plastic Mechanical Fittings for Use on Outside Diameter Controlled   Polyethylene Gas Distribution Pipe and Tubing (Redline)"
2019,ASTM,"F442/F442M-19 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&#x2013;PR)"
2019,ASTM,"F1025-19 Standard Guide for  Selection and Use of Full-Encirclement-Type Band Clamps for   Reinforcement or Repair of Punctures or Holes in Polyethylene Gas   Pressure Pipe"
2019,ASTM,"F1025-19 Standard Guide for  Selection and Use of Full-Encirclement-Type Band Clamps for   Reinforcement or Repair of Punctures or Holes in Polyethylene Gas   Pressure Pipe (Redline)"
2019,ASTM,"F758-14(2019) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2019,ASTM,"F2418-19 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2019,ASTM,"D2290-19a Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2019,ASTM,"D2290-19a Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe (Redline)"
2019,ASTM,"D2444-19 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2019,ASTM,"F2619/F2619M-19 Standard Specification for  High-Density Polyethylene (PE) Line Pipe"
2019,ASTM,"F714-13(2019) Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2019,ASTM,"F1417-11a(2019) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2019,ASTM,"F949-15(2019) Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2019,ASTM,"F439-19 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2019,ASTM,"F1807-19a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F2159-19a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2019,ASTM,"F877-19 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2019,ASTM,"F1563-01(2019) Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2019,ASTM,"F512-19 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2019,ASTM,"F512-19 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation (Redline)"
2019,ASTM,"F1807-19b Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F1960-19a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2019,ASTM,"F2080-19 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2019,ASTM,"F2389-19 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2019,ASTM,"F2434-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing"
2019,ASTM,"F2434-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing (Redline)"
2019,ASTM,"F2562/F2562M-15(2019) Specification for  Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for  Non-Pressure   Drainage and Sewerage"
2019,ASTM,"F1606-19 Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  (PE) Liner"
2019,ASTM,"F1606-19 Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  (PE) Liner (Redline)"
2019,ASTM,"D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric   Seals"
2019,ASTM,"D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric   Seals (Redline)"
2019,ASTM,"F1948-19 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2020,ASTM,"F1948-20 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2020,ASTM,"F1948-20 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing (Redline)"
2020,ASTM,"F877-20 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2020,ASTM,"F949-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2020,ASTM,"F949-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings (Redline)"
2020,ASTM,"F2019-20 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method"
2020,ASTM,"D3212-07(2020) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2020,ASTM,"F2648/F2648M-20 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall   Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2020,ASTM,"F2561-20 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2020,ASTM,"F2561-20 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner (Redline)"
2020,ASTM,"F2599-20 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  >"
2020,ASTM,"F1760-16(2020) Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic   Pipe Having Reprocessed-Recycled Content"
2020,ASTM,"F1974-09(2020) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2020,ASTM,"D2321-20 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2020,ASTM,"D2321-20 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications (Redline)"
2020,ASTM,"F412-20 Standard Terminology Relating to  Plastic Piping Systems"
2003,ASTM,"D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)"
2005,ASTM,"D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007)"
2003,ASTM,"D2447-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)"
1996,ASTM,"D2468-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)"
1996,ASTM,"D2662-96a Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (Withdrawn 2003)"
1996,ASTM,"D2666-96a Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005)"
1995,ASTM,"D3000-95ae1 Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003)"
1992,ASTM,"D3309-92 Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems"
1992,ASTM,"D3309-92a Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems"
2002,ASTM,"D3309-96a(2002) Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)"
2002,ASTM,"D3485-02 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable (Withdrawn 2011)"
1985,ASTM,"D3668-78(1985) Standard Test Method for Bearing Ratio of Laboratory Compacted Soil-Lime Mixtures (Withdrawn 1997)"
1989,ASTM,"D4099-89e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Prime Windows/Sliding Glass Doors"
1995,ASTM,"D4099-95 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)"
1995,ASTM,"F423-95 Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)"
1995,ASTM,"F491-95 Standard Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)"
1995,ASTM,"F492-95 Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
1995,ASTM,"F545-95 Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints (Withdrawn 2001)"
1995,ASTM,"F546-95 Standard Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)"
1995,ASTM,"F599-95 Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
2000,ASTM,"F699-00e1 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing (Withdrawn 2005)"
1995,ASTM,"F781-95 Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
1995,ASTM,"F789-95a Standard Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004)"
1996,ASTM,"F845-96 Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)"
1995,ASTM,"F892-95 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)"
2001,ASTM,"F1176-01e1 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi (Withdrawn 2010)"
2002,ASTM,"F1248-96(2002)e1 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe (Withdrawn 2007)"
2004,ASTM,"F1335-04 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)"
2002,ASTM,"F1380-95a(2002)e1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008)"
2001,ASTM,"F1474-98(2001) Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe (Withdrawn 2003)"
2001,ASTM,"F1589-95(2001) Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)"
2016,ASTM,"F2158-08(2016) Standard Specification for  Residential Central-Vacuum Tube and Fittings"
2003,ASTM,"F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)"
2004,ASTM,"F2330-04 Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water (Withdrawn 2010)"
2018,ASTM,"F2136-18 Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe (Redline)"
2018,ASTM,"F1056-18 Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings (Redline)"
2019,ASTM,"F1417-11A(2019)e1 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2020,ASTM,"F449-20 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2020,ASTM,"F449-20 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control (Redline)"
2020,ASTM,"F2619/F2619M-20 Standard Specification for  High-Density Polyethylene (PE) Line Pipe"
2020,ASTM,"F2619/F2619M-20 Standard Specification for  High-Density Polyethylene (PE) Line Pipe (Redline)"
2020,ASTM,"F1533-20 Standard Specification for  Deformed Polyethylene (PE) Liner"
2020,ASTM,"F493-20 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2020,ASTM,"D2665-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings"
2020,ASTM,"D2672-20 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
2020,ASTM,"D2672-20 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement (Redline)"
2020,ASTM,"D2467-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
2020,ASTM,"D2467-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80 (Redline)"
2020,ASTM,"D2564-20 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
2020,ASTM,"D2564-20 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems (Redline)"
2020,ASTM,"D2241-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2020,ASTM,"D2855-20 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets"
2020,ASTM,"D2855-20 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets (Redline)"
2020,ASTM,"F1041-20 Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2020,ASTM,"F1041-20 Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing (Redline)"
2020,ASTM,"F441/F441M-20 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2020,ASTM,"F442/F442M-20 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&#x2013;PR)"
2020,ASTM,"F2720/F2720M-20 Standard Specification for  Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large   Diameter Pipe"
2020,ASTM,"D2680-20 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride)   (PVC) Composite Sewer Piping"
2020,ASTM,"D2680-20 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride)   (PVC) Composite Sewer Piping (Redline)"
2020,ASTM,"D2774-20 Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2020,ASTM,"F876-20 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"F412-20a Standard Terminology Relating to  Plastic Piping Systems"
2020,ASTM,"F1804-08(2020) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2020,ASTM,"D2239-12a(2020) Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2020,ASTM,"F1733-20 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing"
2020,ASTM,"F2735-20 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2020,ASTM,"F2159-20 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2020,ASTM,"F1498-08(2020) Standard Specification for  Taper Pipe Threads 60&#xb0; for Thermoplastic Pipe and Fittings"
2020,ASTM,"F1962-20 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2020,ASTM,"D2737-12a(2020) Standard Specification for  Polyethylene (PE) Plastic Tubing"
2020,ASTM,"D2683-20 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2020,ASTM,"D2683-20 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing (Redline)"
2020,ASTM,"F1867-06(2020) Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation"
2020,ASTM,"F1871-20 Standard Specification for  Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation"
2020,ASTM,"F1336-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2020,ASTM,"F1336-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings (Redline)"
2020,ASTM,"F2306/F2306M-20 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2020,ASTM,"F2620-20 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2020,ASTM,"F2620-20 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings (Redline)"
2020,ASTM,"F1960-20 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2020,ASTM,"D3212-20 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2020,ASTM,"D2513-20 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2020,ASTM,"D2513-20 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings (Redline)"
2020,ASTM,"F876-20b Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"F876-20a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"D2672-20e1 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
1996,ASTM,"F1248-96 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe"
1980,ASTM,"D2560-80 Specification for Solvent Cements for Cellulose Acetate Butyrate (CAB) Plastic Pipe, Tubing, and Fittings (Withdrawn 1986)"
1989,ASTM,"D2740-89 Specification for Polyvinyl Chloride (PVC) Plastic Tubing (Withdrawn 1989)"
1995,ASTM,"D2750-95 Specification for Acrylonitrile- Butadiene-Sytrene (ABS) Plastics Utilities Conduit and Fittings (Withdrawn 1997)"
1990,ASTM,"D3140-90 Standard Practice for Flaring Polyolefin Pipe and Tubing (Withdrawn 1999)"
1987,ASTM,"D3615-87 Test Method for Chemical Resistance of Thermoset Molding Compouds Used in the Manufacture of Molded Fittings (Withdrawn 1993)"
1992,ASTM,"D4021-92 Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999)"
1982,ASTM,"D4162-82 Specification for Reinforced Thermosetting Resin Sewer and Industrial Pressure Pipe (RTRP) (Withdrawn 1987)"
1993,ASTM,"D4973-93 Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999)"
1983,ASTM,"F600-78(1983) Practice for Nondestructive Ultrasonic Evaluation of Socket and Butt Joints of Thermoplastic Piping (Withdrawn 1989)"
1989,ASTM,"F800-89 Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992)"
1995,ASTM,"F878-95 Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)"
2021,ASTM,"D2837-21 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2021,ASTM,"D2412-21 Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading"
2021,ASTM,"D2412-21 Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading (Redline)"
2021,ASTM,"D2444-21 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2021,ASTM,"D2444-21 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight) (Redline)"
2021,ASTM,"F714-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
1982,ASTM,"F678-82 Specification for Polyethylene Gas Pressure Pipe, Tubing, and Fittings (Withdrawn 1989)"
1995,ASTM,"F809M-95 Specification for Large Diameter Polybutylene Plastic Pipe (Metric) (Withdrawn 1998)"
2021,ASTM,"F1947-21 Standard Practice for  Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits"
2021,ASTM,"F1504-14(2021)e1 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1504-14(2021) Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits"
2021,ASTM,"F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits (Redline)"
2021,ASTM,"D2774-21 Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2021,ASTM,"F585-16(2021) Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2021,ASTM,"F667/F667M-16(2021) Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2021,ASTM,"F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter"
2021,ASTM,"F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter (Redline)"
2021,ASTM,"D2466-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2021,ASTM,"D2609-21 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2021,ASTM,"D2609-21 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe (Redline)"
2021,ASTM,"F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique"
2021,ASTM,"F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique (Redline)"
2021,ASTM,"F656-21 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings"
2021,ASTM,"F656-21 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings (Redline)"
2021,ASTM,"F2618-21 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2021,ASTM,"F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic   Pipe"
2021,ASTM,"F2657-21 Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing"
2021,ASTM,"F2657-21 Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing (Redline)"
2021,ASTM,"F714-21a Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2021,ASTM,"F2159-21 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2021,ASTM,"F2735-21 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2021,ASTM,"F1960-21 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2021,ASTM,"F2389-21 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2021,ASTM,"F437-21 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80"
2021,ASTM,"F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact   with Thermoplastic Pipe and Fittings Materials"
2021,ASTM,"D1785-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2021,ASTM,"F477-14(2021) Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2021,ASTM,"F1804-21 Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2021,ASTM,"F1804-21 Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation (Redline)"
1995,ASTM,"F809/F809M-95e1 Standard Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2006)"
2021,ASTM,"F2164-21 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2021,ASTM,"F2164-21 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure (Redline)"
2021,ASTM,"F2390-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2021,ASTM,"F2390-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content (Redline)"
1977,ASTM,"F443-77e1 Specification for Bell-End Chlorinated Poly(Vinyl Chloride) (CPVC) Pipe Schedule 40"
2021,ASTM,"D2239-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2021,ASTM,"D2737-21 Standard Specification for  Polyethylene (PE) Plastic Tubing"
2021,ASTM,"D3035-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2021,ASTM,"F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2021,ASTM,"F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits (Redline)"
2021,ASTM,"F1504-21 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1504-21 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation (Redline)"
2021,ASTM,"F1947-21a Standard Practice for  Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits"
2021,ASTM,"F1947-21a Standard Practice for  Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits (Redline)"
2021,ASTM,"D2774-21a Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2021,ASTM,"D2774-21a Standard Practice for  Underground Installation of Thermoplastic Pressure Piping (Redline)"
2021,ASTM,"D1785-21a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2021,ASTM,"D1785-21a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120 (Redline)"
1976,ASTM,"D1180-57(1976) Method of Test for Bursting Strength of Round Rigid Plastic Tubing"
1978,ASTM,"D2446-73(1978)e1 Specification for Cellulose Acetate Butyrate (CAB) Plastic Pipe (SDR-PR) and Tubing"
2021,ASTM,"F1545-15a(2021) Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2021,ASTM,"F1281-17(2021)e1 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2021,ASTM,"F1673-10(2021)e1 Standard Specification for  Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2020,ASTM,"F2620-20ae1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2020,ASTM,"F2620-20a Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2021,ASTM,"D2729-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2021,ASTM,"D2729-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Redline)"
2021,ASTM,"D1598-21 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2021,ASTM,"D2235-21 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2021,ASTM,"D2661-21 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2021,ASTM,"D2661-21 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings (Redline)"
2021,ASTM,"D3122-21 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2021,ASTM,"D3122-21 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings (Redline)"
2021,ASTM,"D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2021,ASTM,"D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components (Redline)"
2021,ASTM,"F1057-21 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2021,ASTM,"F1057-21 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique (Redline)"
2021,ASTM,"D3311-17(2021) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2021,ASTM,"F2634-15(2021) Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method"
2021,ASTM,"F1743-21 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2021,ASTM,"F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow  Storm Sewer and  Subsurface Drainage Applications"
2021,ASTM,"F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow  Storm Sewer and  Subsurface Drainage Applications (Redline)"
2021,ASTM,"D3034-21 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2021,ASTM,"F679-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2021,ASTM,"F679-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings (Redline)"
2021,ASTM,"F412-21 Standard Terminology Relating to  Plastic Piping Systems"
2021,ASTM,"F2023-21 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water"
2021,ASTM,"F2023-21 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water (Redline)"
2021,ASTM,"F1216-21 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2021,ASTM,"F1973-21 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2021,ASTM,"F1973-21 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems (Redline)"
2021,ASTM,"F2487-21 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2021,ASTM,"F2487-21 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines (Redline)"
2022,ASTM,"F876-22 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F480-14(2022) Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios (SDR), SCH 40 and SCH 80"
2022,ASTM,"F1429-99(2022) Standard Test Method for  Assembly Force of Plastic Underground Conduit Joints That Use  Flexible Elastomeric Seals Located in the Bell"
2022,ASTM,"F1675-13(2022) Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2022,ASTM,"F2021-17(2022) Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems"
2022,ASTM,"F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2022,ASTM,"F2536-17(2022) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2021,ASTM,"D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2021,ASTM,"D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals (Redline)"
2022,ASTM,"F2623-22 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2022,ASTM,"F2510/F2510M-22 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes"
2022,ASTM,"F2510/F2510M-22 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes (Redline)"
2020,ASTM,"F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2022,ASTM,"F2648/F2648M-22 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications"
2022,ASTM,"D2837-22 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2022,ASTM,"D2837-22 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products (Redline)"
2022,ASTM,"F1802-22 Standard Test Method for  Performance Testing of Excess Flow Valves"
2022,ASTM,"F1802-22 Standard Test Method for  Performance Testing of Excess Flow Valves (Redline)"
2022,ASTM,"F876-22ae1 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F876-22a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2022,ASTM,"F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe (Redline)"
2022,ASTM,"F714-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2022,ASTM,"F2160-22 Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2022,ASTM,"F628-22 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2022,ASTM,"F1668-16(2022) Standard Guide for  Construction Procedures for Buried Plastic Pipe"
2022,ASTM,"D2749-22 Standard Symbols for  Dimensions of Plastic Pipe Fittings"
2022,ASTM,"F877-22 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2022,ASTM,"D2235-22 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2022,ASTM,"D2235-22 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings (Redline)"
2022,ASTM,"D3485-22 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC)"
2022,ASTM,"D3485-22 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC) (Redline)"
2021,ASTM,"F1504-21e1 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2022,ASTM,"F1216-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2022,ASTM,"F1216-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube (Redline)"
2022,ASTM,"D2122-22 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2022,ASTM,"D2122-22 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings (Redline)"
2022,ASTM,"F409-22 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2022,ASTM,"F409-22 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings (Redline)"
2022,ASTM,"F1499-22 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2022,ASTM,"F1499-22 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV) (Redline)"
2022,ASTM,"F1901-22 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2022,ASTM,"F1901-22 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems (Redline)"
2022,ASTM,"F2160-22a Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2022,ASTM,"F2160-22a Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD) (Redline)"
2022,ASTM,"F1970-22 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2022,ASTM,"F1056-18(2022) Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings"
2022,ASTM,"D2949-22 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings"
2022,ASTM,"D2949-22 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings (Redline)"
2022,ASTM,"D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2022,ASTM,"D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns (Redline)"
2022,ASTM,"F493-22 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2022,ASTM,"F493-22 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings (Redline)"
2022,ASTM,"F1960-22 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2022,ASTM,"F905-04(2022) Standard Practice for  Qualification of Polyethylene Saddle-Fused Joints"
2022,ASTM,"F1055-16a(2022) Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2022,ASTM,"D2239-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2022,ASTM,"D2239-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter (Redline)"
2022,ASTM,"D2737-22 Standard Specification for  Polyethylene (PE) Plastic Tubing"
2022,ASTM,"D2737-22 Standard Specification for  Polyethylene (PE) Plastic Tubing (Redline)"
2022,ASTM,"D3035-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2022,ASTM,"D3035-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter (Redline)"
2022,ASTM,"F1741-22 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2022,ASTM,"F1741-22 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits (Redline)"
2022,ASTM,"F1743-22 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2022,ASTM,"F1743-22 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) (Redline)"
2022,ASTM,"F1867-22 Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation"
2022,ASTM,"F1867-22 Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation (Redline)"
2022,ASTM,"F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method"
2022,ASTM,"F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method (Redline)"
2022,ASTM,"F2599-22 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  >"
2022,ASTM,"F2599-22 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  > (Redline)"
2022,ASTM,"F1962-22 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2022,ASTM,"F1962-22 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Redline)"
2023,ASTM,"F2261-06(2023) Standard Test Method for  Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule  40 and 80 Socket-Type"
2023,ASTM,"F876-23 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2023,ASTM,"F877-23 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2023,ASTM,"F1281-23 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2023,ASTM,"F1807-23 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F1807-23 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F2080-23 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2023,ASTM,"F2080-23 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe (Redline)"
2023,ASTM,"F2389-23 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2023,ASTM,"F2389-23 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems (Redline)"
2023,ASTM,"D2657-07(2023) Standard Practice for  Heat Fusion Joining of Polyolefin Pipe and Fittings"
2023,ASTM,"F1483-23 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2023,ASTM,"F1483-23 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe (Redline)"
2023,ASTM,"F1970-23 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2023,ASTM,"F1970-23 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems (Redline)"
2022,ASTM,"F1412-22 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2022,ASTM,"F1412-22 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems (Redline)"
2023,ASTM,"F1282-23 Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2023,ASTM,"F2159-23 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F2145-23 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2023,ASTM,"F2145-23 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing (Redline)"
2023,ASTM,"F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks"
2023,ASTM,"F441/F441M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2023,ASTM,"F441/F441M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80 (Redline)"
2023,ASTM,"F442/F442M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2023,ASTM,"F442/F442M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) (Redline)"
2023,ASTM,"F1866-23 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2023,ASTM,"F1866-23 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings (Redline)"
2023,ASTM,"F2735-23 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2023,ASTM,"F2735-23 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F1960-23 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F1960-23a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F1365-91(2023) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2023,ASTM,"F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications"
2023,ASTM,"F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications (Redline)"
2023,ASTM,"F438-23 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2023,ASTM,"F438-23 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40 (Redline)"
2023,ASTM,"F1281-23a Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2023,ASTM,"F1282-23a Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2023,ASTM,"F1282-23a Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe (Redline)"
2023,ASTM,"F1473-23 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2023,ASTM,"F1473-23 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins (Redline)"
2023,ASTM,"F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2023,ASTM,"F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe (Redline)"
2023,ASTM,"F412-23 Standard Terminology Relating to  Plastic Piping Systems"
2023,ASTM,"F412-23 Standard Terminology Relating to  Plastic Piping Systems (Redline)"
2023,ASTM,"F628-23 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2023,ASTM,"F628-23 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core (Redline)"
2023,ASTM,"F758-14(2023) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2023,ASTM,"F2207-06(2023) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2023,ASTM,"D1598-23 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2023,ASTM,"D1598-23 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure (Redline)"
2023,ASTM,"D2466-23 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2023,ASTM,"D2466-23 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40 (Redline)"
2023,ASTM,"F1960-23b Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F1960-23b Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing (Redline)"
2023,ASTM,"D3034-23 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2023,ASTM,"D3034-23 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Redline)"
2023,ASTM,"D2464-23 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2023,ASTM,"D2464-23 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80 (Redline)"
2023,ASTM,"F891-23 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core"
2023,ASTM,"F891-23 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core (Redline)"
2023,ASTM,"F2418-23 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2023,ASTM,"F2418-23 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers (Redline)"
2023,ASTM,"D2152-23 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2023,ASTM,"D2152-23 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion (Redline)"
2023,ASTM,"F2600-09(2023) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2023,ASTM,"F1563-23 Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2023,ASTM,"F1563-23 Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing (Redline)"
2023,ASTM,"F876-23a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2023,ASTM,"F2623-23 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2023,ASTM,"F2623-23 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications (Redline)"
2024,ASTM,"F512-19(2024) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2024,ASTM,"F714-24 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2024,ASTM,"F714-24 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter (Redline)"
2024,ASTM,"F877-24 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2024,ASTM,"F877-24 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems (Redline)"
2024,ASTM,"F1733-24 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing"
2024,ASTM,"F1733-24 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing (Redline)"
2024,ASTM,"F876-24 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2024,ASTM,"F876-24 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing (Redline)"
2024,ASTM,"F1871-24 Standard Specification for  Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation"
2024,ASTM,"F1871-24 Standard Specification for  Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation (Redline)"
2024,ASTM,"F2136-18(2024) Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2024,ASTM,"F2231-02(2024) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in  Pressurized Pipes"
2024,ASTM,"F1281-24 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2024,ASTM,"F1281-24 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe (Redline)"
2024,ASTM,"F2562/F2562M-24 Specification for  Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for  Non-Pressure   Drainage and Sewerage"
2024,ASTM,"F2562/F2562M-24 Specification for  Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for  Non-Pressure   Drainage and Sewerage (Redline)"
2024,ASTM,"F894-24 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe"
2024,ASTM,"F894-24 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe (Redline)"
2024,ASTM,"F2623-24 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2024,ASTM,"F2623-24e1 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2024,ASTM,"D3261-24 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene  (PE) Plastic Pipe and Tubing"
2024,ASTM,"D3261-24 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene  (PE) Plastic Pipe and Tubing (Redline)"
2024,ASTM,"F437-24 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80"
2024,ASTM,"F437-24 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80 (Redline)"
2024,ASTM,"D2241-24 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2024,ASTM,"D2241-24 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) (Redline)"
2024,ASTM,"D2665-24 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings"
2024,ASTM,"D2665-24 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings (Redline)"
2024,ASTM,"D2846/D2846M-24 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2024,ASTM,"D2846/D2846M-24 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems (Redline)"
2024,ASTM,"F439-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2024,ASTM,"F439-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80 (Redline)"
2024,ASTM,"F2618-24 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2024,ASTM,"F2618-24 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems (Redline)"