2001,ASTM,"D2581-01 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2002,ASTM,"D2581-02 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
1996,ASTM,"D2581-96 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2000,ASTM,"D2582-00 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2003,ASTM,"D2582-03 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2007,ASTM,"D2582-07 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2008,ASTM,"D2582-08 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2006,ASTM,"D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2007,ASTM,"D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
1995,ASTM,"D2583-95 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2001,ASTM,"D2842-01 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
2006,ASTM,"D2842-06 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
1997,ASTM,"D2842-97 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
1999,ASTM,"D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2004,ASTM,"D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
1997,ASTM,"D3045-92(1997) Standard Practice for Heat Aging of Plastics Without Load"
2003,ASTM,"D3045-92(2003) Standard Practice for Heat Aging of Plastics Without Load"
2005,ASTM,"D3222-05 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
1999,ASTM,"D3222-99 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
2000,ASTM,"D3350-00 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2001,ASTM,"D3350-01 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2002,ASTM,"D3350-02 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2002,ASTM,"D3350-02a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2004,ASTM,"D3350-04 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2005,ASTM,"D3350-05 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2006,ASTM,"D3350-06 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2008,ASTM,"D3350-08  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2001,ASTM,"D3453-01 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
2007,ASTM,"D3453-07 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
1996,ASTM,"D3453-96 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
2003,ASTM,"D3574-03 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2005,ASTM,"D3574-05 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2008,ASTM,"D3574-08 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
1995,ASTM,"D3574-95 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2000,ASTM,"D3575-00 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2001,ASTM,"D3676-01 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2007,ASTM,"D3676-07 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1996,ASTM,"D3676-96a Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2004,ASTM,"D3965-04 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2005,ASTM,"D3965-05 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
1999,ASTM,"D3965-99 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2001,ASTM,"D4065-01 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
2006,ASTM,"D4065-06 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
1995,ASTM,"D4065-95 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
2000,ASTM,"D4101-00 Standard Specification for Polypropylene Injection and Extrusion Materials"
2001,ASTM,"D4101-01 Standard Specification for Polypropylene Injection and Extrusion Materials"
2001,ASTM,"D4101-01a Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02 Standard Specification for Polypropylene Injection and Extrusion Materials"
2007,ASTM,"D4101-07 Standard Specification for Polypropylene Injection and Extrusion Materials"
2008,ASTM,"D4101-08 Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4216-03 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds"
2006,ASTM,"D4216-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2003,ASTM,"D4272-03 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop"
2008,ASTM,"D4272-08a Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
1999,ASTM,"D4272-99 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop"
2000,ASTM,"D4397-00 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2002,ASTM,"D4397-02 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2008,ASTM,"D4397-08 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2002,ASTM,"D4673-02 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2008,ASTM,"D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2001,ASTM,"D4802-01 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2002,ASTM,"D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
1994,ASTM,"D4802-94 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2000,ASTM,"D4976-00b Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2002,ASTM,"D4976-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2006,ASTM,"D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2009,ASTM,"D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2009,ASTM,"D2582-09 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2009,ASTM,"D4101-09 Standard Specification for Polypropylene Injection and Extrusion Materials"
2009,ASTM,"D4272-09 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2009,ASTM,"D4397-09 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2009,ASTM,"D2383-09 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
2004,ASTM,"D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2002,ASTM,"D2538-02 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
2005,ASTM,"D2561-95(2005) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
2008,ASTM,"D2562-94(2008) Standard Practice for  Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2008,ASTM,"D2563-08 Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
2009,ASTM,"D2578-09 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2008,ASTM,"D2584-08 Standard Test Method for  Ignition Loss of Cured Reinforced Resins"
2005,ASTM,"D2659-95(2005) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2009,ASTM,"D2673-09 Standard Specification for Oriented Polypropylene Film"
2008,ASTM,"D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
2009,ASTM,"D2734-09 Standard Test Methods for Void Content of Reinforced Plastics"
2005,ASTM,"D2741-95(2005) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
2006,ASTM,"D2765-01(2006) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2009,ASTM,"D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2007,ASTM,"D2857-95(2007) Standard Practice for Dilute Solution Viscosity of Polymers"
2005,ASTM,"D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2008,ASTM,"D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2009,ASTM,"D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
2007,ASTM,"D3012-07 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven"
2004,ASTM,"D3014-04a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2006,ASTM,"D3030-95(2006) Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2003,ASTM,"D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2006,ASTM,"D3159-06 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2008,ASTM,"D3275-08 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2003,ASTM,"D3291-97(2003) Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
2006,ASTM,"D3295-06 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2008,ASTM,"D3296-03(2008) Standard Specification for FEP-Fluorocarbon Tube"
2006,ASTM,"D3308-06 Standard Specification for PTFE Resin Skived Tape"
2008,ASTM,"D3354-08 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2004,ASTM,"D3364-99(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
2009,ASTM,"D3367-09 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
2008,ASTM,"D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry"
2006,ASTM,"D3419-00(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2008,ASTM,"D3420-08 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2006,ASTM,"D3489-06 Standard Test Methods for Microcellular Urethane Materials"
2003,ASTM,"D3591-97(2003) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
2006,ASTM,"D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2007,ASTM,"D3595-02(2007) Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
2009,ASTM,"D3596-09 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2009,ASTM,"D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
2009,ASTM,"D3675-09a Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2009,ASTM,"D3748-09 Standard Practice for Evaluating High-Density Rigid Cellular Plastics"
2008,ASTM,"D3749-08 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
2006,ASTM,"D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery"
2006,ASTM,"D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer"
2006,ASTM,"D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials"
2008,ASTM,"D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
2008,ASTM,"D3846-08 Standard Test Method for  In-Plane Shear Strength of Reinforced Plastics"
2007,ASTM,"D3851-07 Standard Specification for Urethane Microcellular Shoe Soling Materials"
2009,ASTM,"D3892-93(2009) Standard Practice for Packaging/Packing of Plastics"
2007,ASTM,"D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2008,ASTM,"D3914-02(2008) Standard Test Method for  In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
2006,ASTM,"D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2003,ASTM,"D3918-96(2003) Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2009,ASTM,"D3935-09 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2009,ASTM,"D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2006,ASTM,"D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering"
2005,ASTM,"D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2003,ASTM,"D4067-03 Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
2007,ASTM,"D4092-07 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
2007,ASTM,"D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers"
2007,ASTM,"D4203-07 Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2006,ASTM,"D4204-06 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study"
2008,ASTM,"D4218-96(2008) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
2005,ASTM,"D4273-05 Standard Test Methods for Polyurethane Raw Materials  Determination of Primary Hydroxyl Content of Polyether Polyols"
2005,ASTM,"D4274-05 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols"
2009,ASTM,"D4275-09 Standard Test Method for  Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
2009,ASTM,"D4321-09 Standard Test Method for Package Yield of Plastic Film"
2005,ASTM,"D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics"
2004,ASTM,"D4349-96(2004) Classification System for Polyphenylene Ether (PPE) Materials"
2005,ASTM,"D4350-00(2005) Standard Test Method for Corrosivity Index of Plastics and Fillers"
2005,ASTM,"D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2006,ASTM,"D4396-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications"
2008,ASTM,"D4440-08 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2007,ASTM,"D4443-07 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2006,ASTM,"D4459-06 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2008,ASTM,"D4473-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2008,ASTM,"D4475-02(2008) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2007,ASTM,"D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2003,ASTM,"D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2007,ASTM,"D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2003,ASTM,"D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2004,ASTM,"D4634-04 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2008,ASTM,"D4635-08a Standard Specification for  Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2009,ASTM,"D4659-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
2006,ASTM,"D4660-06 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2009,ASTM,"D4661-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
2008,ASTM,"D4662-08  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2007,ASTM,"D4669-07 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2007,ASTM,"D4670-07 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2005,ASTM,"D4671-05 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
2002,ASTM,"D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2008,ASTM,"D4745-08 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2003,ASTM,"D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2009,ASTM,"D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2006,ASTM,"D4812-06 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2005,ASTM,"D4819-96(2005) Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics"
2005,ASTM,"D4875-05 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
2008,ASTM,"D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2004,ASTM,"D4889-04 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
2006,ASTM,"D4890-06 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
2007,ASTM,"D4894-07 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
2007,ASTM,"D4969-07 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2007,ASTM,"D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)"
2007,ASTM,"D5024-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression"
2005,ASTM,"D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2006,ASTM,"D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2009,ASTM,"D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2009,ASTM,"D5047-09 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2009,ASTM,"D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
2006,ASTM,"D5071-06 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2010,ASTM,"D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2010,ASTM,"D3016-97(2010) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
2009,ASTM,"D3294-09 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
2010,ASTM,"D3350-10  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2010,ASTM,"D3368-04(2010) Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
2010,ASTM,"D4441-04(2010) Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2010,ASTM,"D4877-10 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
2009,ASTM,"D4968-09 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2010,ASTM,"D4986-10 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2010,ASTM,"D2647-10 Standard Specification for Crosslinkable Ethylene Plastics"
2010,ASTM,"D4101-10 Standard Specification for Polypropylene Injection and Extrusion Materials"
2010,ASTM,"D5083-10 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2008,ASTM,"D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2010,ASTM,"D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2010,ASTM,"D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2010,ASTM,"D2839-10 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2010,ASTM,"D3045-92(2010) Standard Practice for Heat Aging of Plastics Without Load"
2010,ASTM,"D3307-10 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2010,ASTM,"D3576-04(2010) Standard Test Method for Cell Size of Rigid Cellular Plastics"
2010,ASTM,"D3641-10 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2010,ASTM,"D3763-10 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2010,ASTM,"D3769-10 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2010,ASTM,"D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2008,ASTM,"D3826-98(2008) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
2008,ASTM,"D3917-08 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2010,ASTM,"D4000-10a Standard Classification System for  Specifying Plastic Materials"
2008,ASTM,"D4066-01a(2008) Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2010,ASTM,"D4385-10 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics"
2010,ASTM,"D4663-10 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2010,ASTM,"D4703-10 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2010,ASTM,"D4802-10 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2010,ASTM,"D4895-10 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2008,ASTM,"D2563-08 Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Redline)"
2009,ASTM,"D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (Redline)"
2010,ASTM,"D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Redline)"
2009,ASTM,"D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting (Redline)"
2008,ASTM,"D3846-08 Standard Test Method for  In-Plane Shear Strength of Reinforced Plastics (Redline)"
2006,ASTM,"D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Redline)"
2009,ASTM,"D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications (Redline)"
2007,ASTM,"D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers (Redline)"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Redline)"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics (Redline)"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater (Redline)"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique (Redline)"
2010,ASTM,"D3350-10a  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2004,ASTM,"D4101-04a Standard Specification for Polypropylene Injection and Extrusion Materials"
2005,ASTM,"D4101-05 Standard Specification for Polypropylene Injection and Extrusion Materials"
2005,ASTM,"D4101-05a Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06 Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06a Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06b Standard Specification for Polypropylene Injection and Extrusion Materials"
2010,ASTM,"D4101-10a Standard Specification for Polypropylene Injection and Extrusion Materials"
2010,ASTM,"D4397-10 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
1998,ASTM,"D4673-98 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2010,ASTM,"D3222-05(2010) Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
2011,ASTM,"D4101-11 Standard Specification for Polypropylene Injection and Extrusion Materials"
2001,ASTM,"D2383-97(2001) Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
1997,ASTM,"D2383-97 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
1999,ASTM,"D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2008,ASTM,"D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2003,ASTM,"D2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
1997,ASTM,"D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2010,ASTM,"D2463-10a Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2010,ASTM,"D2463-10 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2005,ASTM,"D2463-95(2005) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2001,ASTM,"D2463-95(2001) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
1995,ASTM,"D2463-95 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2010,ASTM,"D2538-02(2010) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
1995,ASTM,"D2538-95 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
2001,ASTM,"D2561-95(2001) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
1995,ASTM,"D2561-95 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
2002,ASTM,"D2563-94(2002)e1 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
1994,ASTM,"D2563-94 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
2008,ASTM,"D2578-08 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2004,ASTM,"D2578-04a Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2004,ASTM,"D2578-04 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
1999,ASTM,"D2578-99a Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2001,ASTM,"D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2011,ASTM,"D2584-11 Standard Test Method for  Ignition Loss of Cured Reinforced Resins"
2002,ASTM,"D2584-02 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
1994,ASTM,"D2584-94 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2009,ASTM,"D2647-09 Standard Specification for Crosslinkable Ethylene Plastics"
2005,ASTM,"D2647-05a Standard Specification for Crosslinkable Ethylene Plastics"
2005,ASTM,"D2647-05 Standard Specification for Crosslinkable Ethylene Plastics"
2000,ASTM,"D2647-94(2000)e1 Standard Specification for Crosslinkable Ethylene Plastics"
1994,ASTM,"D2647-94 Standard Specification for Crosslinkable Ethylene Plastics"
2011,ASTM,"D2659-11 Standard Test Method for  Column Crush Properties of Blown Thermoplastic Containers"
2001,ASTM,"D2659-95(2001) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
1995,ASTM,"D2659-95 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2004,ASTM,"D2673-04 Standard Specification for Oriented Polypropylene Film"
1999,ASTM,"D2673-99 Standard Specification for Oriented Polypropylene Film"
2005,ASTM,"D2684-95(2005) Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2001,ASTM,"D2684-95(2001) Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
1995,ASTM,"D2684-95 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2003,ASTM,"D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
1996,ASTM,"D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
2003,ASTM,"D2734-94(2003) Standard Test Methods for Void Content of Reinforced Plastics"
1994,ASTM,"D2734-94 Standard Test Methods for Void Content of Reinforced Plastics"
2011,ASTM,"D2765-11 Standard Test Methods for  Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2001,ASTM,"D2765-01 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
1995,ASTM,"D2765-95 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2008,ASTM,"D2838-08 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2007,ASTM,"D2838-07 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2002,ASTM,"D2838-02 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
1995,ASTM,"D2838-95 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2005,ASTM,"D2839-05 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2002,ASTM,"D2839-02 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2004,ASTM,"D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2001,ASTM,"D2857-95(2001) Standard Practice for Dilute Solution Viscosity of Polymers"
1995,ASTM,"D2857-95 Standard Practice for Dilute Solution Viscosity of Polymers"
2010,ASTM,"D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2001,ASTM,"D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles"
1994,ASTM,"D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2006,ASTM,"D2923-06 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2001,ASTM,"D2923-01 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
1995,ASTM,"D2923-95 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2001,ASTM,"D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
1995,ASTM,"D2990-95 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
2004,ASTM,"D3012-04 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven"
2000,ASTM,"D3012-00 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven"
2011,ASTM,"D3014-11 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2004,ASTM,"D3014-04 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
1999,ASTM,"D3014-99 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2011,ASTM,"D3030-11 Standard Test Method for  Volatile Matter (Including Water) of Vinyl Chloride Resins"
2000,ASTM,"D3030-95(2000) Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
1995,ASTM,"D3030-95 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2011,ASTM,"D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
1998,ASTM,"D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2010,ASTM,"D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2004,ASTM,"D3159-04 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
1998,ASTM,"D3159-98 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2006,ASTM,"D3275-06 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2005,ASTM,"D3275-05 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2000,ASTM,"D3275-00 Standard Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
1997,ASTM,"D3275-97 Standard Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2011,ASTM,"D3291-11 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
1997,ASTM,"D3291-97 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
2003,ASTM,"D3294-03 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
1997,ASTM,"D3294-97 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
2011,ASTM,"D3295-06(2011) Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2001,ASTM,"D3295-01 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
1997,ASTM,"D3295-97 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2003,ASTM,"D3296-03 Standard Specification for FEP-Fluorocarbon Tube"
1998,ASTM,"D3296-98 Standard Specification for FEP-Fluorocarbon Tube"
2008,ASTM,"D3307-08 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2006,ASTM,"D3307-06 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2004,ASTM,"D3307-04 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2001,ASTM,"D3307-01 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2000,ASTM,"D3307-00 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2001,ASTM,"D3308-01 Standard Specification for PTFE Resin Skived Tape"
1997,ASTM,"D3308-97 Standard Specification for PTFE Resin Skived Tape"
2011,ASTM,"D3354-11 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2004,ASTM,"D3354-04 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
1996,ASTM,"D3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2011,ASTM,"D3364-99(2011) Standard Test Method for  Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
1999,ASTM,"D3364-99 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
2004,ASTM,"D3367-98(2004) Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
1998,ASTM,"D3367-98 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
2004,ASTM,"D3368-04 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
1999,ASTM,"D3368-99 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
2003,ASTM,"D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry"
1999,ASTM,"D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry"
2000,ASTM,"D3419-00 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
1993,ASTM,"D3419-93 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2008,ASTM,"D3420-08a Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2002,ASTM,"D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film"
2007,ASTM,"D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography"
2000,ASTM,"D3465-00 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography"
2000,ASTM,"D3489-96(2000) Standard Test Methods for Rubber--Microcellular Urethane"
1996,ASTM,"D3489-96 Standard Test Methods for Rubber--Microcellular Urethane"
2001,ASTM,"D3574-01e1 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2008,ASTM,"D3575-08 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2000,ASTM,"D3575-00e1 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2004,ASTM,"D3576-04 Standard Test Method for Cell Size of Rigid Cellular Plastics"
1998,ASTM,"D3576-98 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2011,ASTM,"D3591-97(2011) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
1997,ASTM,"D3591-97 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
2000,ASTM,"D3594-93(2000) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
1993,ASTM,"D3594-93 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2002,ASTM,"D3595-02 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
1997,ASTM,"D3595-97 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
2001,ASTM,"D3596-92(2001) Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2010,ASTM,"D3641-10a Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2002,ASTM,"D3641-02 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
1997,ASTM,"D3641-97 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2003,ASTM,"D3647-03 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
1995,ASTM,"D3647-84(1995) Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
2011,ASTM,"D3675-11 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2009,ASTM,"D3675-09 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2008,ASTM,"D3675-08 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2005,ASTM,"D3675-05 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2001,ASTM,"D3675-01 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source"
1998,ASTM,"D3675-98 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source"
2003,ASTM,"D3748-03 Standard Practice for Evaluating High-Density Rigid Cellular Plastics"
1998,ASTM,"D3748-98 Standard Practice for Evaluating High-Density Rigid Cellular Thermoplastics"
2002,ASTM,"D3749-95(2002) Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
2010,ASTM,"D3763-10e1 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2008,ASTM,"D3763-08 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2006,ASTM,"D3763-06 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2002,ASTM,"D3763-02 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2000,ASTM,"D3763-00 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2000,ASTM,"D3768-96(2000) Standard Test Method for Microcellular Urethanes--Flexural Recovery"
1996,ASTM,"D3768-96 Standard Test Method for Microcellular Urethanes--Flexural Recovery"
2005,ASTM,"D3769-05 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2000,ASTM,"D3769-96(2000) Standard Test Method for Microcellular Urethanes--High Temperature Sag"
1996,ASTM,"D3769-96 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2000,ASTM,"D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer"
2006,ASTM,"D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2000,ASTM,"D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
1996,ASTM,"D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2002,ASTM,"D3826-98(2002) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
2002,ASTM,"D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
1996,ASTM,"D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
2002,ASTM,"D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
1994,ASTM,"D3846-94 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
2003,ASTM,"D3851-97(2003)e1 Standard Specification for Urethane Microcellular Shoe Soling Materials"
1997,ASTM,"D3851-97 Standard Specification for Urethane Microcellular Shoe Soling Materials"
2003,ASTM,"D3892-93(2003) Standard Practice for Packaging/Packing of Plastics"
1998,ASTM,"D3892-93(1998) Standard Practice for Packaging/Packing of Plastics"
2006,ASTM,"D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2004,ASTM,"D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2003,ASTM,"D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2002,ASTM,"D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
1998,ASTM,"D3895-98 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2002,ASTM,"D3914-02 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
1996,ASTM,"D3914-96 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
1999,ASTM,"D3915-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2004,ASTM,"D3915-99a(2004) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2008,ASTM,"D3916-08 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
2002,ASTM,"D3916-02 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
1994,ASTM,"D3916-94 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
2011,ASTM,"D3917-11 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2002,ASTM,"D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
1996,ASTM,"D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2011,ASTM,"D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2011,ASTM,"D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products (Redline)"
1996,ASTM,"D3918-96 Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2002,ASTM,"D3935-02 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2001,ASTM,"D3935-94(2001) Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
1994,ASTM,"D3935-94 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2011,ASTM,"D3965-11 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2009,ASTM,"D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2008,ASTM,"D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2003,ASTM,"D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
1995,ASTM,"D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2011,ASTM,"D4000-11  Standard Classification System for  Specifying Plastic Materials"
2010,ASTM,"D4000-10 Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09b Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09a Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09 Standard Classification System for  Specifying Plastic Materials"
2008,ASTM,"D4000-08 Standard Classification System for  Specifying Plastic Materials"
2007,ASTM,"D4000-07 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04e1 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04 Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03a Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01ae1 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01 Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00a Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00 Standard Classification System for Specifying Plastic Materials"
1999,ASTM,"D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering"
2011,ASTM,"D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2000,ASTM,"D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2011,ASTM,"D4067-11 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
2010,ASTM,"D4067-10 Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
1996,ASTM,"D4067-96 Standard Specification for Reinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding and Extrusion Materials"
2001,ASTM,"D4092-01 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
1996,ASTM,"D4092-96 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
2010,ASTM,"D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2005,ASTM,"D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2001,ASTM,"D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
1995,ASTM,"D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2000,ASTM,"D4094-00 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers"
2000,ASTM,"D4203-00 Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2000,ASTM,"D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study"
2000,ASTM,"D4216-00e1 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds"
2001,ASTM,"D4218-96(2001) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
1996,ASTM,"D4218-96 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
2008,ASTM,"D4272-08 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2011,ASTM,"D4273-11 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols"
1999,ASTM,"D4273-99 Standard Test Methods for Polyurethane Raw Materials  Determination of Primary Hydroxyl Content of Polyether Polyols"
2011,ASTM,"D4274-11 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols"
1999,ASTM,"D4274-99 Standard Test Methods for Testing Polyurethane Raw Materials  Determination of Hydroxyl Numbers of Polyols"
2002,ASTM,"D4275-02 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
2004,ASTM,"D4321-04 Standard Test Method for Package Yield of Plastic Film"
1999,ASTM,"D4321-99 Standard Test Method for Package Yield of Plastic Film"
1999,ASTM,"D4329-99 Standard Practice for Fluorescent UV Exposure of Plastics"
2010,ASTM,"D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
1996,ASTM,"D4349-96 Standard Classification System for Polyphenylene Ether (PPE) Materials"
2000,ASTM,"D4350-00 Standard Test Method for Corrosivity Index of Plastics and Fillers"
2002,ASTM,"D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
1994,ASTM,"D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2008,ASTM,"D4385-08 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2002,ASTM,"D4385-02 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
1995,ASTM,"D4385-95 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
1999,ASTM,"D4396-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications"
2007,ASTM,"D4440-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2001,ASTM,"D4440-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
1995,ASTM,"D4440-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2004,ASTM,"D4441-04 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
1998,ASTM,"D4441-98 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2002,ASTM,"D4443-95(2002) Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
1999,ASTM,"D4459-99 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2003,ASTM,"D4473-03 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2001,ASTM,"D4473-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
1995,ASTM,"D4473-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2002,ASTM,"D4475-02 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
1996,ASTM,"D4475-96 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
2003,ASTM,"D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
1997,ASTM,"D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2006,ASTM,"D4508-06 Standard Test Method for Chip Impact Strength of Plastics"
2005,ASTM,"D4508-05 Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04a Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04 Standard Test Method for Chip Impact Strength of Plastics"
1998,ASTM,"D4508-98 Standard Test Method for Chip Impact Strength of Plastics"
2001,ASTM,"D4526-96(2001)e1 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
1996,ASTM,"D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2011,ASTM,"D4549-11 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2000,ASTM,"D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2001,ASTM,"D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1997,ASTM,"D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1996,ASTM,"D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2011,ASTM,"D4634-11a Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2011,ASTM,"D4634-11  Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
1999,ASTM,"D4634-99 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2008,ASTM,"D4635-08 Standard Specification for  Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2001,ASTM,"D4635-01 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
1995,ASTM,"D4635-95 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2003,ASTM,"D4659-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
1998,ASTM,"D4659-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Specific Gravity of Isocyanates"
2006,ASTM,"D4660-00(2006)e1 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2000,ASTM,"D4660-00 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2003,ASTM,"D4661-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
1998,ASTM,"D4661-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Total Chlorine in Isocyanates"
2011,ASTM,"D4662-08(2011)e1  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2003,ASTM,"D4662-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
1998,ASTM,"D4662-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Acid and Alkalinity Numbers of Polyols"
2004,ASTM,"D4663-98(2004) Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
1998,ASTM,"D4663-98 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2002,ASTM,"D4669-98(2002)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
1998,ASTM,"D4669-98 Standard Test Method for Polyurethane Raw Materials  Determination of Specific Gravity of Polyols"
2002,ASTM,"D4670-97(2002) Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
1997,ASTM,"D4670-97 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2010,ASTM,"D4671-05(2010)e1 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
1999,ASTM,"D4671-99 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
2006,ASTM,"D4672-00(2006)e1 Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols"
2000,ASTM,"D4672-00 Standard Test Methods for Polyurethane Raw Materials Determination of Water Content of Polyols"
2010,ASTM,"D4674-02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2002,ASTM,"D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
1997,ASTM,"D4674-89(1997) Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
2010,ASTM,"D4703-10a Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2007,ASTM,"D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2003,ASTM,"D4703-03 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2002,ASTM,"D4703-02 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2000,ASTM,"D4703-00 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
1993,ASTM,"D4703-93 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2011,ASTM,"D4745-11 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2006,ASTM,"D4745-06 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2001,ASTM,"D4745-01 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1997,ASTM,"D4745-97 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1998,ASTM,"D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2007,ASTM,"D4801-07 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2006,ASTM,"D4801-06 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2005,ASTM,"D4801-05 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2001,ASTM,"D4801-95(2001)e1 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
1995,ASTM,"D4801-95 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2003,ASTM,"D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
1998,ASTM,"D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2005,ASTM,"D4812-05 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics"
1999,ASTM,"D4812-99 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics"
1996,ASTM,"D4819-96 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics"
2011,ASTM,"D4875-11 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
1999,ASTM,"D4875-99 Standard Test Methods of Polyurethane Raw Materials  Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
2004,ASTM,"D4877-04 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
1998,ASTM,"D4877-98 Standard Test Method for Polyurethane Raw Materials  Determination of APHA Color in Isocyanates"
2003,ASTM,"D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
1998,ASTM,"D4878-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Polyols"
2003,ASTM,"D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
1999,ASTM,"D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2011,ASTM,"D4889-04(2011) Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
1998,ASTM,"D4889-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Crude or Modified Isocyanates"
2003,ASTM,"D4890-98(2003) Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
1998,ASTM,"D4890-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Gardner and APHA Color of Polyols"
2004,ASTM,"D4894-04 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
1998,ASTM,"D4894-98a Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
2004,ASTM,"D4895-04 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
1998,ASTM,"D4895-98 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2008,ASTM,"D4968-08 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2006,ASTM,"D4968-06 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4968-02 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4969-02 Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric"
1997,ASTM,"D4969-97 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2002,ASTM,"D4976-02e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2003,ASTM,"D4986-03 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
1998,ASTM,"D4986-98 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2009,ASTM,"D5017-96(2009)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2003,ASTM,"D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
1996,ASTM,"D5017-96 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2001,ASTM,"D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties:  In Flexure (Three-Point Bending)"
1999,ASTM,"D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties:  In Flexure (Three-Point Bending)"
2001,ASTM,"D5024-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression"
1999,ASTM,"D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2001,ASTM,"D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
1995,ASTM,"D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2003,ASTM,"D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2003,ASTM,"D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
1996,ASTM,"D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2007,ASTM,"D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
1999,ASTM,"D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
2005,ASTM,"D5047-05 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5047-95(2003) Standard Specification for Polyethylene Terephthalate Film and Sheeting"
1995,ASTM,"D5047-95 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1997,ASTM,"D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1999,ASTM,"D5071-99 Standard Practice for Exposure of Photodegradable Plastics in a  Xenon Arc Apparatus"
2008,ASTM,"D5083-08 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2002,ASTM,"D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
1996,ASTM,"D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2011,ASTM,"D3489-11 Standard Test Methods for  Microcellular Urethane Materials"
2011,ASTM,"D3574-11 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2011,ASTM,"D3768-11 Standard Test Method for  Microcellular Urethanes—Flexural Recovery"
2011,ASTM,"D4745-11a Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2011,ASTM,"D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2011,ASTM,"D4812-11 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2011,ASTM,"D5025-11 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2011,ASTM,"D4745-11ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2001,ASTM,"D3574-01 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2004,ASTM,"D4101-04 Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03b Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03a Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03 Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02b Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02a Standard Specification for Polypropylene Injection and Extrusion Materials"
2011,ASTM,"D4603-03(2011)e1 Standard Test Method for  Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2012,ASTM,"D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2012,ASTM,"D3350-12 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2012,ASTM,"D3419-12 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2012,ASTM,"D3641-12 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2012,ASTM,"D4000-12 Standard Classification System for  Specifying Plastic Materials"
2012,ASTM,"D4660-12 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2012,ASTM,"D4591-07(2012) Standard Test Method for  Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2012,ASTM,"D4894-07(2012) Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials "
2012,ASTM,"D4969-07(2012) Standard Specification for  Polytetrafluoroethylene–(PTFE) Coated Glass Fabric"
2012,ASTM,"D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D3917-12 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
1979,ASTM,"D2584-68(1979)e1 Standard Test Method for Ignition Loss Of Cured Reinforced Resins"
2012,ASTM,"D2842-12 Standard Test Method for  Water Absorption of Rigid Cellular Plastics"
1977,ASTM,"D2857-70(1977) Standard Test Method for Dilute Solution Viscosity Of Polymers"
2003,ASTM,"D3016-97(2003) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
1997,ASTM,"D3016-97 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
2012,ASTM,"D3308-12 Standard Specification for  PTFE Resin Skived Tape"
2012,ASTM,"D3418-12 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2012,ASTM,"D3453-12 Standard Specification for  Flexible Cellular Materials—Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications"
1978,ASTM,"D3676-78e1 Standard Specification for Rubber Cellular Cushion Used For Carpet Or Rug Underlay"
2012,ASTM,"D3749-12 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2012,ASTM,"D3795-00a(2012) Standard Test Method for  Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer"
2012,ASTM,"D3851-07(2012) Standard Specification for  Urethane Microcellular Shoe Soling Materials"
2012,ASTM,"D4065-12 Standard Practice for  Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures "
2012,ASTM,"D4204-12 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2012,ASTM,"D4459-12 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2012,ASTM,"D4670-07(2012)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols"
2012,ASTM,"D4672-12 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols "
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D5025-12 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2012,ASTM,"D4526-12 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2012,ASTM,"D2561-12 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
1968,ASTM,"D2584-68 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins"
2012,ASTM,"D3308-12 Standard Specification for  PTFE Resin Skived Tape (Redline)"
1977,ASTM,"D3574-77e2 Standard Methods of Testing Flexible Cellular Materials-Slab, Bonded, And Molded Urethane Foams"
2012,ASTM,"D3675-12 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2012,ASTM,"D4203-12 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2012,ASTM,"D4443-12 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials (Redline)"
2002,ASTM,"D2562-94(2002)e1 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2012,ASTM,"D3418-12e1 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2001,ASTM,"D4066-01a Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2001,ASTM,"D4066-01 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2000,ASTM,"D4066-00a Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2000,ASTM,"D4066-00 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1994,ASTM,"D4066-94b Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2013,ASTM,"D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2013,ASTM,"D2583-13 Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor"
2013,ASTM,"D3012-13 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven"
2013,ASTM,"D3275-08(2013) Standard Classification System for  E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2012,ASTM,"D3350-12e1 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
1988,ASTM,"D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis"
2013,ASTM,"D3594-93(2013) Standard Test Method for  Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2013,ASTM,"D3676-13 Standard Specification for  Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1989,ASTM,"D3676-78(1989)e1 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2013,ASTM,"D3826-98(2013) Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test"
1991,ASTM,"D3826-91e1 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
1983,ASTM,"D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer"
2013,ASTM,"D4000-13 Standard Classification System for  Specifying Plastic Materials"
2013,ASTM,"D4092-07(2013) Standard Terminology for  Plastics: Dynamic Mechanical Properties"
1988,ASTM,"D4101-82(1988)e1 Standard Specification for Propylene Plastic Injection and Extrusion Materials"
2013,ASTM,"D4669-07(2013)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2013,ASTM,"D4890-13 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2013,ASTM,"D5071-06(2013) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2013,ASTM,"D4066-13 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1996,ASTM,"D4066-96ae1 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1996,ASTM,"D4066-96 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2001,ASTM,"D2538-95(2001) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
1994,ASTM,"D2562-94 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2001,ASTM,"D2741-95(2001) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
1995,ASTM,"D2741-95 Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
1996,ASTM,"D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene"
1989,ASTM,"D3275-89 Standard Specification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
1995,ASTM,"D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film"
1992,ASTM,"D3596-92 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins (Withdrawn 2001)"
1995,ASTM,"D3749-95 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
1999,ASTM,"D3814-99 Standard Guide for Locating Combustion Test Methods for Polymeric Materials"
1998,ASTM,"D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
1996,ASTM,"D4275-96 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
1995,ASTM,"D4443-95 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF)"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF) (Redline)"
1996,ASTM,"D4617-96 Standard Specification for Phenolic Compounds, (PF)"
2001,ASTM,"D4801-95(2001) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2000,ASTM,"D4968-00 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
1985,ASTM,"D2584-68(1985) Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2013,ASTM,"D2583-13a Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor"
2013,ASTM,"D2583-13a Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor (Redline)"
2013,ASTM,"D2923-13 Standard Test Method for  Rigidity of Polyolefin Film and Sheeting"
2013,ASTM,"D2923-13 Standard Test Method for  Rigidity of Polyolefin Film and Sheeting (Redline)"
2013,ASTM,"D4329-13 Standard Practice for  Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight (Redline)"
2013,ASTM,"D4819-13 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics"
2013,ASTM,"D4819-13 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics (Redline)"
1997,ASTM,"D4225-97 Standard Specification for Styrene-Butadiene Sheeting"
1996,ASTM,"D3369-96 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film"
1996,ASTM,"D4322-96 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography"
1992,ASTM,"D4923-92 Standard Specification for Reinforced Thermosetting Plastic Poles"
2013,ASTM,"D4001-13 Standard Test Method for  Determination of Weight-Average Molecular Weight of Polymers  By Light Scattering"
2013,ASTM,"D3367-13 Standard Test Method for  Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force"
2013,ASTM,"D3596-13 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2013,ASTM,"D3749-13 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2013,ASTM,"D4216-13 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2013,ASTM,"D4443-13 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2013,ASTM,"D4661-13 Standard Test Methods for  Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2013,ASTM,"D4385-13 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2013,ASTM,"D4350-13 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2014,ASTM,"D3575-14 Standard Test Methods for  Flexible Cellular Materials Made From Olefin Polymers"
2014,ASTM,"D3368-14 Standard Specification for  FEP-Fluorocarbon Sheet and Film"
2014,ASTM,"D4101-14 Standard Specification for  Polypropylene Injection and Extrusion Materials"
2014,ASTM,"D2383-14 Standard Practice for  Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC)  Compounds Under Humid Conditions"
2014,ASTM,"D3748-14 Standard Practice for  Evaluating High-Density Rigid Cellular Plastics"
2014,ASTM,"D3748-14 Standard Practice for  Evaluating High-Density Rigid Cellular Plastics (Redline)"
2014,ASTM,"D3465-14 Standard Test Method for  Purity of Monomeric Plasticizers by Gas Chromatography"
2014,ASTM,"D3641-14 Standard Practice for  Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2014,ASTM,"D4659-14 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates"
2014,ASTM,"D3296-14 Standard Specification for  FEP-Fluorocarbon Tube"
2014,ASTM,"D3595-14 Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film"
2014,ASTM,"D3595-14 Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film (Redline)"
2014,ASTM,"D3675-14 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2014,ASTM,"D4272-14 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2014,ASTM,"D4272-14 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop (Redline)"
2014,ASTM,"D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2014,ASTM,"D2673-14 Standard Specification for  Oriented Polypropylene Film (Redline)"
2014,ASTM,"D3296-14a Standard Specification for  FEP-Fluorocarbon Tube"
2014,ASTM,"D3296-14a Standard Specification for  FEP-Fluorocarbon Tube (Redline)"
2014,ASTM,"D4877-14 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2014,ASTM,"D5026-06(2014)e1 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Tension"
2014,ASTM,"D3420-14 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2014,ASTM,"D3763-14 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2014,ASTM,"D5048-14 Standard Test Method for  Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2014,ASTM,"D2673-14 Standard Specification for  Oriented Polypropylene Film"
2014,ASTM,"D3596-14 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl  Chloride) (PVC) Resins"
2014,ASTM,"D4745-14 Standard Classification System and Basis for Specification
 for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods"
2014,ASTM,"D3350-14 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2014,ASTM,"D2732-14 Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting "
2014,ASTM,"D2732-14 Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting  (Redline)"
2014,ASTM,"D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials (Redline)"
2010,ASTM,"D5083-10e1 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2015,ASTM,"D4440-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2015,ASTM,"D3418-15 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2015,ASTM,"D4894-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials "
2015,ASTM,"D4895-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2015,ASTM,"D4441-15 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2015,ASTM,"D3222-05(2015) Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2015,ASTM,"D3917-15 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2015,ASTM,"D3935-15 Standard Classification System and Basis for Specification
 for Polycarbonate (PC) Unfilled and Reinforced Material"
2015,ASTM,"D4889-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates "
2015,ASTM,"D4663-15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates "
2015,ASTM,"D3641-15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2015,ASTM,"D4321-15 Standard Test Method for  Package Yield of Plastic Film"
2015,ASTM,"D4321-15 Standard Test Method for  Package Yield of Plastic Film (Redline)"
2015,ASTM,"D4350-15 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2015,ASTM,"D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2015,ASTM,"D5024-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression"
2015,ASTM,"D5023-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending) "
2015,ASTM,"D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2015,ASTM,"D3917-15e1 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2009,ASTM,"D2838-09e1 Standard Test Method for  Shrink Tension and Orientation Release Stress of Plastic Film  and Thin Sheeting"
2015,ASTM,"D2562-94(2015) Standard Practice for  Classifying Visual Defects in Parts Molded from Reinforced  Thermosetting Plastics"
2015,ASTM,"D2563-08(2015) Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate  Parts"
2015,ASTM,"D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
2015,ASTM,"D3294-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes"
2015,ASTM,"D3295-15 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2015,ASTM,"D4662-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS) (Redline)"
2015,ASTM,"D3769-15 Standard Test Method for  Microcellular Urethanes&#x2014;High-Temperature Sag"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics (Redline)"
2015,ASTM,"D3159-15 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2015,ASTM,"D3763-15 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2012,ASTM,"D5025-12e1 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2015,ASTM,"D3576-15 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2015,ASTM,"D3917-15a Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2015,ASTM,"D4396-15 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications"
2015,ASTM,"D4272/D4272M-15 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop"
2015,ASTM,"D4218-15 Standard Test Method for  Determination of Carbon Black Content in Polyethylene Compounds  By the Muffle-Furnace Technique"
2015,ASTM,"D4802-15 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2015,ASTM,"D4968-15 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2016,ASTM,"D3914-02(2016) Standard Test Method for  In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic  Rod"
2016,ASTM,"D3916-08(2016) Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod"
2016,ASTM,"D4475-02(2016) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2016,ASTM,"D4703-16 Standard Practice for  Compression Molding Thermoplastic Materials into Test Specimens,  Plaques, or Sheets"
2016,ASTM,"D4703-16 Standard Practice for  Compression Molding Thermoplastic Materials into Test Specimens,  Plaques, or Sheets (Redline)"
2016,ASTM,"D3307-16 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) (Redline)"
2016,ASTM,"D4673-16 Standard Classification System for and Basis for Specification for Acrylonitrile&#x2013;Butadiene&#x2013;Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2016,ASTM,"D2582-16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting"
2016,ASTM,"D4635-16 Standard Specification for  Plastic Films Made from Low-Density Polyethylene and Linear  Low-Density Polyethylene for General Use and Packaging Applications"
2016,ASTM,"D4635-16 Standard Specification for  Plastic Films Made from Low-Density Polyethylene and Linear  Low-Density Polyethylene for General Use and Packaging Applications (Redline)"
2016,ASTM,"D4274-16 Standard Test Methods for Testing  Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2016,ASTM,"D4671-16 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols"
2016,ASTM,"D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2016,ASTM,"D4000-16 Standard Classification System for Specifying Plastic Materials"
2014,ASTM,"D4101-14e1 Standard Specification for Polypropylene Injection and Extrusion Materials"
2016,ASTM,"D2659-16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2016,ASTM,"D2659-16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers (Redline)"
2016,ASTM,"D3981-09a(2016) Standard Specification for  Polyethylene Films Made from Medium-Density Polyethylene for  General Use and Packaging Applications"
2016,ASTM,"D4895-16 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet (Redline)"
2016,ASTM,"D3675-16 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2016,ASTM,"D2843-16 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2016,ASTM,"D3835-16 Standard Test Method for  Determination of Properties of Polymeric Materials by Means  of a Capillary Rheometer "
2016,ASTM,"D3835-16 Standard Test Method for  Determination of Properties of Polymeric Materials by Means  of a Capillary Rheometer  (Redline)"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications (Redline)"
2016,ASTM,"D3965-16 Standard Classification System and Basis for Specifications for  Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings"
2016,ASTM,"D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to  Composition"
2016,ASTM,"D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to  Composition (Redline)"
2016,ASTM,"D2734-16 Standard Test Methods for  Void Content of Reinforced Plastics"
2016,ASTM,"D4067-16 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2016,ASTM,"D2857-16 Standard Practice for Dilute Solution Viscosity of Polymers"
2016,ASTM,"D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked  Ethylene Plastics"
2016,ASTM,"D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked  Ethylene Plastics (Redline)"
2016,ASTM,"D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2016,ASTM,"D3291-11(2016)e1 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression"
2016,ASTM,"D4801-08(2016) Standard Specification for  Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and  Greater"
2014,ASTM,"D4101-14e2 Standard Specification for Polypropylene Injection and Extrusion Materials"
2016,ASTM,"D4473-08(2016) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2016,ASTM,"D4204-16 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2016,ASTM,"D4204-16 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study (Redline)"
2016,ASTM,"D4350-16 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2016,ASTM,"D4350-16 Standard Test Method for  Corrosivity Index of Plastics and Fillers (Redline)"
2016,ASTM,"D3574-16 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting (Redline)"
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols "
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols  (Redline)"
2017,ASTM,"D3489-17 Standard Test Methods for  Microcellular Urethane Materials"
2017,ASTM,"D5017-17 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance"
2017,ASTM,"D5017-17 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance (Redline)"
2017,ASTM,"D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers  of Ethylene and Ethylene&#x2013;Vinyl Acetate (EVA) Copolymers by  Gas Chromatography"
2017,ASTM,"D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers  of Ethylene and Ethylene&#x2013;Vinyl Acetate (EVA) Copolymers by  Gas Chromatography (Redline)"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens (Redline)"
2017,ASTM,"D2990-17 Standard Test Methods for  Tensile, Compressive, and Flexural Creep and Creep-Rupture  of Plastics "
2017,ASTM,"D2990-17 Standard Test Methods for  Tensile, Compressive, and Flexural Creep and Creep-Rupture  of Plastics  (Redline)"
2017,ASTM,"D3574-17 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams"
2017,ASTM,"D3574-17 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams (Redline)"
2017,ASTM,"D2561-17 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
2017,ASTM,"D2561-17 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers (Redline)"
2017,ASTM,"D3675-17 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2017,ASTM,"D3368-17 Standard Specification for FEP Sheet and Film"
2017,ASTM,"D3368-17 Standard Specification for FEP Sheet and Film (Redline)"
2017,ASTM,"D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2017,ASTM,"D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials (Redline)"
2017,ASTM,"D4968-17 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2017,ASTM,"D3308-12(2017) Standard Specification for  PTFE Resin Skived Tape"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis (Redline)"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric (Redline)"
2017,ASTM,"D3851-17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials"
2017,ASTM,"D3851-17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials (Redline)"
2017,ASTM,"D4216-17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2017,ASTM,"D3030-17 Standard Test Method for  Volatile Matter (Including Water) of Vinyl Chloride Resins"
2017,ASTM,"D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2018,ASTM,"D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film  and Thin Sheeting"
2018,ASTM,"D3222-18 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell"
2018,ASTM,"D4875-18 Standard Test Methods of  Polyurethane Raw Materials: Determination of the Polymerized  Ethylene Oxide Content of Polyether Polyols"
2018,ASTM,"D4273-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols"
2017,ASTM,"D2578-17 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films"
2017,ASTM,"D3591-17 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds"
2017,ASTM,"D4101-17 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials"
2018,ASTM,"D4669-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols "
2018,ASTM,"D4672-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols "
2018,ASTM,"D4660-18 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate"
2018,ASTM,"D4986-18 Standard Test Method for  Horizontal Burning Characteristics of Cellular Polymeric Materials"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer (Redline)"
2018,ASTM,"D3014-18 Standard Test Method for  Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2018,ASTM,"D3222-18a Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2018,ASTM,"D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2018,ASTM,"D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols (Redline)"
2018,ASTM,"D3045-18 Standard Practice for  Heat Aging of Plastics Without Load"
2018,ASTM,"D3045-18 Standard Practice for  Heat Aging of Plastics Without Load (Redline)"
2018,ASTM,"D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2018,ASTM,"D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay (Redline)"
2018,ASTM,"D4661-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials (Redline)"
2018,ASTM,"D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2018,ASTM,"D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins (Redline)"
2018,ASTM,"D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2018,ASTM,"D3016-97(2018) Standard Practice for  Use of Liquid Exclusion Chromatography Terms and Relationships"
2018,ASTM,"D2647-18 Standard Specification for  Crosslinkable Ethylene Plastics"
2018,ASTM,"D2647-18 Standard Specification for  Crosslinkable Ethylene Plastics (Redline)"
2018,ASTM,"D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2018,ASTM,"D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials (Redline)"
2018,ASTM,"D4883-18 Standard Test Method for  Density of Polyethylene by the Ultrasound Technique"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion (Redline)"
2018,ASTM,"D3763-18 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2018,ASTM,"D3826-18 Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test"
2018,ASTM,"D3826-18 Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test (Redline)"
2018,ASTM,"D2538-18 Standard Practice for  Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque  Rheometer"
2018,ASTM,"D2538-18 Standard Practice for  Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque  Rheometer (Redline)"
2019,ASTM,"D3801-19 Standard Test Method for  Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2019,ASTM,"D4674-19 Standard Practice for  Accelerated Testing for Color Stability of Plastics Exposed  to Indoor Office Environments"
2019,ASTM,"D3748-14(2019) Standard Practice for  Evaluating High-Density Rigid Cellular Plastics"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography (Redline)"
2019,ASTM,"D3012-19 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven"
2019,ASTM,"D3012-19 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven (Redline)"
2019,ASTM,"D3596-19 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl  Chloride) (PVC) Resins"
2019,ASTM,"D3596-19 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl  Chloride) (PVC) Resins (Redline)"
2019,ASTM,"D3749-19 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2019,ASTM,"D3749-19 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique (Redline)"
2019,ASTM,"D3364-99(2019) Standard Test Method for  Flow Rates for Poly(Vinyl Chloride) with Molecular Structural  Implications"
2019,ASTM,"D3419-12(2019) Standard Practice for  In-Line Screw-Injection Molding Test Specimens From Thermosetting  Compounds"
2019,ASTM,"D2842-19 Standard Test Method for  Water Absorption of Rigid Cellular Plastics"
2019,ASTM,"D2842-19 Standard Test Method for  Water Absorption of Rigid Cellular Plastics (Redline)"
2019,ASTM,"D4968-19 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D3595-14(2019) Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film"
2019,ASTM,"D3296-14a(2019) Standard Specification for  FEP-Fluorocarbon Tube"
2019,ASTM,"D4804-19 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods (Redline)"
2019,ASTM,"D4894-19 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials "
2019,ASTM,"D4894-19 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials  (Redline)"
2017,ASTM,"D4101-17e1 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials"
2019,ASTM,"D3895-19 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry"
2019,ASTM,"D3895-19 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry (Redline)"
2019,ASTM,"D3595-14(2019)e1 Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film"
2014,ASTM,"D4804-14 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2014,ASTM,"D3895-14 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry"
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates "
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates  (Redline)"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics (Redline)"
2019,ASTM,"D3014-19 Standard Test Method for  Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2019,ASTM,"D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates (Redline)"
2019,ASTM,"D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC)  Compounds Under Humid Conditions"
2019,ASTM,"D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC)  Compounds Under Humid Conditions (Redline)"
2019,ASTM,"D2843-19 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2019,ASTM,"D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2019,ASTM,"D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics (Redline)"
2019,ASTM,"D4066-13(2019) Standard Classification System for  Nylon Injection and Extrusion Materials (PA)"
2019,ASTM,"D3124-98(2019) Standard Test Method for  Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products (Redline)"
2019,ASTM,"D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2019,ASTM,"D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position (Redline)"
2019,ASTM,"D4804-19a Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2019,ASTM,"D3801-19a Standard Test Method for  Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2020,ASTM,"D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers"
2020,ASTM,"D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers (Redline)"
2020,ASTM,"D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2020,ASTM,"D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2020,ASTM,"D4986-20 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2020,ASTM,"D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds  by the Muffle-Furnace Technique"
2020,ASTM,"D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds  by the Muffle-Furnace Technique (Redline)"
2020,ASTM,"D2732-14(2020) Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting "
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates"
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates (Redline)"
2020,ASTM,"D5025-20 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2020,ASTM,"D5025-20a Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2020,ASTM,"D5025-20a Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials (Redline)"
2020,ASTM,"D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer"
2020,ASTM,"D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer (Redline)"
1972,ASTM,"D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials"
1970,ASTM,"D2236-70 Standard Method Of Test For Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum"
1976,ASTM,"D2236-70(1976) Standard Test Method for Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum"
2015,ASTM,"D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2016,ASTM,"D2839-16 Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene"
1995,ASTM,"D3015-95 Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (Withdrawn 2001)"
1993,ASTM,"D3351-93 Standard Test Method for Gel Count of Plastic Film (Withdrawn 2000)"
2015,ASTM,"D3354-15 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method"
2001,ASTM,"D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)"
1976,ASTM,"D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)"
2016,ASTM,"D3768-16 Standard Test Method for  Microcellular Urethanes&#x2014;Flexural Recovery"
1991,ASTM,"D3770-91 Specification for Flexible Cellular Materials-High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Withdrawn 1998)"
1993,ASTM,"D3834-93 Test Method for Purity of Vinyl Chloride Monomer by Gas Chromatography (Withdrawn 1998)"
1992,ASTM,"D4202-92 Test Method for Thermal Stability of Poly(Vinyl Chloride) (PVC) Resin (Withdrawn 1998)"
2003,ASTM,"D4225-03 Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)"
2001,ASTM,"D4322-96(2001)e1 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010)"
1996,ASTM,"D4357-96 Standard Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics (Withdrawn 2004)"
2000,ASTM,"D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)"
1996,ASTM,"D4509-96 Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)"
1994,ASTM,"D4805-88(1994)e1 Standard Terminology for Plastics Standards (Withdrawn 2002)"
2001,ASTM,"D4923-01 Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010)"
2000,ASTM,"D5021-00 Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)"
2014,ASTM,"D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Redline)"
2016,ASTM,"D2839-16 Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene (Redline)"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell (Redline)"
2020,ASTM,"D3892-15(2020) Standard Practice for Packaging/Packing of Plastics"
2020,ASTM,"D3453-20 Standard Specification for Flexible Cellular Materials&#x2014;Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications"
2020,ASTM,"D3453-20 Standard Specification for Flexible Cellular Materials&#x2014;Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications (Redline)"
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols  (Redline)"
2020,ASTM,"D3159-20 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography (Redline)"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene (Redline)"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame (Redline)"
2020,ASTM,"D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2020,ASTM,"D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position (Redline)"
2020,ASTM,"D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures"
2020,ASTM,"D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures (Redline)"
2020,ASTM,"D3769-20 Standard Test Method for Microcellular Urethanes&#x2014;High-Temperature Sag"
2020,ASTM,"D3769-20 Standard Test Method for Microcellular Urethanes&#x2014;High-Temperature Sag (Redline)"
2020,ASTM,"D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers  by Light Scattering"
2020,ASTM,"D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers  by Light Scattering (Redline)"
2020,ASTM,"D4976-12a(2020) Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2020,ASTM,"D3222-20 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2020,ASTM,"D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2020,ASTM,"D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics (Redline)"
2020,ASTM,"D4000-20 Standard Classification System for Specifying Plastic Materials"
2020,ASTM,"D2396-20 Standard Test Methods for  Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using  a Torque Rheometer"
2020,ASTM,"D2396-20 Standard Test Methods for  Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using  a Torque Rheometer (Redline)"
2020,ASTM,"D3295-20 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2020,ASTM,"D3295-20 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing (Redline)"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates (Redline)"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications (Redline)"
2021,ASTM,"D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force"
2021,ASTM,"D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force (Redline)"
1981,ASTM,"D1788-81 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)"
1981,ASTM,"D2123-81 Specification for Rigid Poly (Vinyl Chloride-Vinyl Acetate) Plastic Sheet (Withdrawn 1987)"
1981,ASTM,"D2133-81 Specification for Acetal Resin Injection Molding and Extrusion Materials (Withdrawn 1985)"
1984,ASTM,"D2289-84 Method of Test for Tensile Properties of Plastics at High Speeds (Withdrawn 1990)"
1985,ASTM,"D2292-85 Recommended Practice for Compression Molding Test Specimens of Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1992)"
1982,ASTM,"D2299-68(1982) Recommended Practice for Determining Relative Stain Resistance of Plastics (Withdrawn 1992)"
1981,ASTM,"D2341-81 Specification for Rigid Urethane Foam (Withdrawn 1988)"
1986,ASTM,"D2393-86 Test Method for Viscosity of Epoxy Resins and Related Components"
1982,ASTM,"D2408-82 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)"
1982,ASTM,"D2410-82 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988)"
1981,ASTM,"D2530-81 Specification for Nonoriented Propylene Plastic Film (Withdrawn 1987)"
1984,ASTM,"D2660-84 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)"
1980,ASTM,"D2730-80 Method for Sag Flow of Highly Viscous Materials (Withdrawn 1986)"
1981,ASTM,"D2853-81 Specification for Reinforced Olefin Polymers for Injection Molding and Extrusion (Withdrawn 1987)"
1984,ASTM,"D2991-84 Recommended Practice for Testing Stress-Relaxation of Plastics (Withdrawn 1990)"
1995,ASTM,"D3028-95 Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids (Withdrawn 2000)"
1986,ASTM,"D3031-81(1986) Method of Test for Total Sulfur in Natural Gas (Hydrogenation) (Withdrawn 1990)"
1984,ASTM,"D3098-84 Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Plastic Laminates (Withdrawn 1988)"
1993,ASTM,"D3297-93 Practice for Molding and Machining Tolerances for PTFE Resin Parts (Withdrawn 1997)"
1990,ASTM,"D3490-80(1990) Specification for Flexible Cellular Materials-Bonded Urethane Foam (Withdrawn 1997)"
1995,ASTM,"D3713-95 Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000)"
1988,ASTM,"D3894-88 Test Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (Withdrawn 1994)"
1994,ASTM,"D4019-94a Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002)"
1989,ASTM,"D4100-82(1989)e1 Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials (Withdrawn 1997)"
2021,ASTM,"D3675-21 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
1982,ASTM,"D2146-82 Specification for Propylene Plastic Molding and Extrusion Materials (Withdrawn 1985)"
1981,ASTM,"D2150-81 Specification for Woven Roving Glass Fabric for Polyester-Glass Laminates (Withdrawn 1986)"
1981,ASTM,"D2236-81 Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsienal Pendulum (Withdrawn 1984)"
1981,ASTM,"D3011-81 Specification for Reinforced and Filled Polystyrene, Styrene-Acrylonitrile, and ABS for Molding and Extrusion (Withdrawn 1987)"
1987,ASTM,"D3027-87 Practice for Compression Molding Specimens of Allyl Molding Compounds (Withdrawn 1992)"
1996,ASTM,"D3293-91a(1996) Specification for PTFE Resin Molded Sheet (Withdrawn 1997)"
1991,ASTM,"D3536-91 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquir Exclusion Chromatography (Gel Permeation Chromatography - GPC) (Withdrawn 1996)"
1994,ASTM,"D4205-93(1994)e1 Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)"
2021,ASTM,"D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2021,ASTM,"D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting"
2021,ASTM,"D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting (Redline)"
2021,ASTM,"D3420-21 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2021,ASTM,"D3420-21 Standard Test Method for  Pendulum Impact Resistance of Plastic Film (Redline)"
2021,ASTM,"D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2021,ASTM,"D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials (Redline)"
2021,ASTM,"D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2021,ASTM,"D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics (Redline)"
2021,ASTM,"D4473-08(2021) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2021,ASTM,"D4549-15(2021) Standard Classification System and Basis for Specification for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method (Redline)"
2021,ASTM,"D4274-21 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics (Redline)"
2021,ASTM,"D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols"
2021,ASTM,"D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols (Redline)"
2021,ASTM,"D3350-21 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2021,ASTM,"D3350-21 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials (Redline)"
2021,ASTM,"D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography"
2021,ASTM,"D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography (Redline)"
2021,ASTM,"D4819-13(2021)e1 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics"
1980,ASTM,"D1502-60(1980)e1 Method of Test for Transverse Load of Corrugated Reinforced Plastic Panels"
1978,ASTM,"D2735-78 Practice for Determination of Effect of Cyclic Immersion of Syntactic Foam at Pressure"
1978,ASTM,"D2736-78 Practice for Determination of Hydrostatic Compressive Strength of Syntactic Foam"
1969,ASTM,"D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres"
1980,ASTM,"D2849-69(1980)e1 Methods of Testing Urethane Foam Polyol Raw Materials"
1981,ASTM,"D2948-81e1 Specification for Glass-Reinforced and Glass-Filled Acetal Resin Molding and Extrusion"
1987,ASTM,"D3010-87 Practice for Preparing Compression-Molded Test Sample Plaques of Rigid Poly(Vinyl Chloride) Compounds"
1986,ASTM,"D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration"
1987,ASTM,"D4098-82(1987)e1 Practice for Evaluating High-Density Rigid Cellular Thermosets"
2021,ASTM,"D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2021,ASTM,"D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials (Redline)"
2021,ASTM,"D3307-21 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials"
2021,ASTM,"D3307-21 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials (Redline)"
2021,ASTM,"D3418-21 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2021,ASTM,"D3418-21 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry (Redline)"
2021,ASTM,"D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings"
2021,ASTM,"D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings (Redline)"
1976,ASTM,"D2926-70(1976)e1 Method of Test for Bulk Modulus of Elasticity of Syntactic Foam (Piston-Cylinder Method)"
2021,ASTM,"D4092-21 Standard Terminology for  Plastics: Dynamic Mechanical Properties"
2021,ASTM,"D4092-21 Standard Terminology for  Plastics: Dynamic Mechanical Properties (Redline)"
2021,ASTM,"D5071-06(2021) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2021,ASTM,"D3354-21 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method"
2021,ASTM,"D3354-21 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method (Redline)"
2021,ASTM,"D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2021,ASTM,"D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material (Redline)"
2021,ASTM,"D4067-21 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2022,ASTM,"D4364-13(2022)e1 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2022,ASTM,"D2673-14(2022) Standard Specification for Oriented Polypropylene Film"
2022,ASTM,"D3368-17(2022) Standard Specification for FEP Sheet and Film"
2022,ASTM,"D3851-17(2022) Standard Specification for Microcellular Polyurethane Shoe Soling Materials"
2022,ASTM,"D3768-22 Standard Test Method for  Microcellular Urethanes—Flexural Recovery"
2022,ASTM,"D3768-22 Standard Test Method for  Microcellular Urethanes—Flexural Recovery (Redline)"
2022,ASTM,"D2843-22 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2022,ASTM,"D2843-22 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics (Redline)"
2022,ASTM,"D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2022,ASTM,"D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source (Redline)"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry (Redline)"
2022,ASTM,"D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2022,ASTM,"D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials (Redline)"
2019,ASTM,"D4812-19e1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2022,ASTM,"D3308-12(2022) Standard Specification for  PTFE Resin Skived Tape"
2022,ASTM,"D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric"
2022,ASTM,"D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers"
2022,ASTM,"D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers (Redline)"
2022,ASTM,"D3291-22 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression"
2022,ASTM,"D3291-22 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression (Redline)"
2022,ASTM,"D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2022,ASTM,"D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds (Redline)"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials (Redline)"
2022,ASTM,"D4670-17(2022)e1 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols"
2022,ASTM,"D3294-22 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes"
2022,ASTM,"D3294-22 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes (Redline)"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials (Redline)"
2022,ASTM,"D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2022,ASTM,"D3591-22 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds"
2022,ASTM,"D3591-22 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds (Redline)"
2022,ASTM,"D4396-22 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications"
2022,ASTM,"D4396-22 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications (Redline)"
2022,ASTM,"D4350-16(2022) Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2022,ASTM,"D5045-14(2022) Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2023,ASTM,"D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials"
2023,ASTM,"D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials (Redline)"
2022,ASTM,"D3916-22 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod"
2022,ASTM,"D3916-22 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod (Redline)"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials (Redline)"
2023,ASTM,"D2578-23 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films"
2023,ASTM,"D2578-23 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films (Redline)"
2023,ASTM,"D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2023,ASTM,"D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods (Redline)"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates (Redline)"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics (Redline)"
2023,ASTM,"D4273-23 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols"
2023,ASTM,"D4273-23 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols (Redline)"
2023,ASTM,"D2839-16(2023) Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene"
2023,ASTM,"D4274-23 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2023,ASTM,"D4274-23 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols (Redline)"
2023,ASTM,"D4660-23 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate"
2023,ASTM,"D4660-23 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate (Redline)"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials (Redline)"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (Redline)"
2023,ASTM,"D3275-18(2023) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2023,ASTM,"D4895-18(2023) Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2023,ASTM,"D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2023,ASTM,"D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (Redline)"
2023,ASTM,"D3489-23 Standard Test Methods for  Microcellular Urethane Materials"
2023,ASTM,"D3489-23 Standard Test Methods for  Microcellular Urethane Materials (Redline)"
2023,ASTM,"D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2023,ASTM,"D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (Redline)"
2023,ASTM,"D4272/D4272M-23 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop"
2023,ASTM,"D4272/D4272M-23 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop (Redline)"
2023,ASTM,"D2561-17(2023) Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
2023,ASTM,"D2659-16(2023) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2023,ASTM,"D4204-16(2023) Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2023,ASTM,"D4397-16(2023) Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2023,ASTM,"D5047-17(2023) Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2023,ASTM,"D2734-23 Standard Test Methods for  Void Content of Reinforced Plastics"
2023,ASTM,"D2734-23 Standard Test Methods for  Void Content of Reinforced Plastics (Redline)"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology (Redline)"
2023,ASTM,"D5023-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending)"
2023,ASTM,"D5023-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending) (Redline)"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension (Redline)"
2023,ASTM,"D3763-23 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2023,ASTM,"D3763-23 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors (Redline)"
2023,ASTM,"D3917-23 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2023,ASTM,"D3917-23 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes (Redline)"
2023,ASTM,"D5024-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression"
2023,ASTM,"D5024-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression (Redline)"
2024,ASTM,"D2647-18(2024) Standard Specification for  Crosslinkable Ethylene Plastics"
2024,ASTM,"D2765-16(2024) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked  Ethylene Plastics"
2024,ASTM,"D4875-24 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized  Ethylene Oxide Content of Polyether Polyols"
2024,ASTM,"D4875-24 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized  Ethylene Oxide Content of Polyether Polyols (Redline)"
2024,ASTM,"D4669-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols"
2024,ASTM,"D4669-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols (Redline)"
2024,ASTM,"D4672-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols"
2024,ASTM,"D4672-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols (Redline)"
2024,ASTM,"D4101-24 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials"
2024,ASTM,"D4101-24 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials (Redline)"
2024,ASTM,"D3981-09a(2024)e1 Standard Specification for  Polyethylene Films Made from Medium-Density Polyethylene for  General Use and Packaging Applications"