2001,ASTM,"C1147-01 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics"
2006,ASTM,"C1147-01(2006) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics"
1995,ASTM,"C1147-95 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics"
2000,ASTM,"D1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics"
2007,ASTM,"D1003-07 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics"
2003,ASTM,"D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting"
2007,ASTM,"D1004-07 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting"
2008,ASTM,"D1004-08 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting"
1994,ASTM,"D1004-94a Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting"
2003,ASTM,"D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting"
2005,ASTM,"D1044-05 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion"
1999,ASTM,"D1044-99 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion"
2000,ASTM,"D1056-00 Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber"
2007,ASTM,"D1056-07 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber"
1999,ASTM,"D1201-99 Standard Specification for Thermosetting Polyester Molding Compounds"
2004,ASTM,"D1201-99(2004) Standard Specification for Thermosetting Polyester Molding Compounds"
2003,ASTM,"D1203-94(2003) Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods"
2002,ASTM,"D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature"
2007,ASTM,"D1204-07 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature"
2008,ASTM,"D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature"
2000,ASTM,"D1238-00 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2004,ASTM,"D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2004,ASTM,"D1238-04a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2004,ASTM,"D1238-04c Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2000,ASTM,"D1248-00a Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable"
2002,ASTM,"D1248-02 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable"
2004,ASTM,"D1248-04 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable"
2005,ASTM,"D1248-05 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable"
2005,ASTM,"D1435-05 Standard Practice for Outdoor Weathering of Plastics"
1999,ASTM,"D1435-99 Standard Practice for Outdoor Weathering of Plastics"
1997,ASTM,"D1494-97 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2001,ASTM,"D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2005,ASTM,"D1499-05 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics"
1999,ASTM,"D1499-99 Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics"
2003,ASTM,"D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique"
1999,ASTM,"D1527-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2005,ASTM,"D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2009,ASTM,"D1593-09 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting"
2007,ASTM,"D1600-07 Standard Terminology for Abbreviated Terms Relating to Plastics"
1999,ASTM,"D1600-99 Standard Terminology for Abbreviated Terms Relating to Plastics"
2001,ASTM,"D1603-01 Standard Test Method for Carbon Black In Olefin Plastics"
2006,ASTM,"D1603-06 Standard Test Method for Carbon Black Content in Olefin Plastics"
1994,ASTM,"D1603-94 Standard Test Method for Carbon Black In Olefin Plastics"
2000,ASTM,"D1621-00 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics"
2004,ASTM,"D1621-04 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics"
2004,ASTM,"D1621-04a Standard Test Method for Compressive Properties Of Rigid Cellular Plastics"
2003,ASTM,"D1622-03 Standard Test Method for Apparent Density of Rigid Cellular Plastics"
2008,ASTM,"D1622-08 Standard Test Method for Apparent Density of Rigid Cellular Plastics"
2003,ASTM,"D1623-03 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics"
2005,ASTM,"D1667-05 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)"
1997,ASTM,"D1667-97 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)"
2000,ASTM,"D1693-00 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2001,ASTM,"D1693-01 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2005,ASTM,"D1693-05 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2007,ASTM,"D1693-07 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2007,ASTM,"D1693-07a Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2003,ASTM,"D1709-03 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
2004,ASTM,"D1709-04 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
2008,ASTM,"D1709-08 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
2002,ASTM,"D1784-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2003,ASTM,"D1784-03 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2006,ASTM,"D1784-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2006,ASTM,"D1784-06a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2007,ASTM,"D1784-07 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2008,ASTM,"D1784-08 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2003,ASTM,"D1785-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2004,ASTM,"D1785-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2004,ASTM,"D1785-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2005,ASTM,"D1785-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2006,ASTM,"D1785-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
1999,ASTM,"D1785-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120"
2006,ASTM,"D1822-06 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials"
1999,ASTM,"D1822-99 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials"
1996,ASTM,"D1929-96 Standard Test Method for Determining Ignition Temperature of Plastics"
2004,ASTM,"D1998-04 Standard Specification for Polyethylene Upright Storage Tanks"
2006,ASTM,"D1998-06 Standard Specification for Polyethylene Upright Storage Tanks"
1997,ASTM,"D1998-97 Standard Specification for Polyethylene Upright Storage Tanks"
2003,ASTM,"D2103-03 Standard Specification for Polyethylene Film and Sheeting"
2005,ASTM,"D2103-05 Standard Specification for Polyethylene Film and Sheeting"
2008,ASTM,"D2103-08 Standard Specification for Polyethylene Film and Sheeting"
1997,ASTM,"D2103-97 Standard Specification for Polyethylene Film and Sheeting"
2004,ASTM,"D2126-04 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging"
1999,ASTM,"D2126-99 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging"
2004,ASTM,"D2235-04 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2003,ASTM,"D2239-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2000,ASTM,"D2241-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2004,ASTM,"D2241-04b Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2005,ASTM,"D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
1996,ASTM,"D2287-96 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds"
2001,ASTM,"D2287-96(2001) Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds"
2001,ASTM,"D2310-01 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2006,ASTM,"D2310-06 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1997,ASTM,"D2310-97 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2000,ASTM,"D2321-00 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2005,ASTM,"D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2008,ASTM,"D2321-08 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2002,ASTM,"D2412-02 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2008,ASTM,"D2412-02(2008) Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
1996,ASTM,"D2412-96a Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2006,ASTM,"D2464-06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"D2464-99 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"D2466-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2002,ASTM,"D2466-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2005,ASTM,"D2466-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2006,ASTM,"D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
1999,ASTM,"D2466-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40"
2001,ASTM,"D2467-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"D2467-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2004,ASTM,"D2467-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2005,ASTM,"D2467-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2006,ASTM,"D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"D2467-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2000,ASTM,"D2513-00 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2001,ASTM,"D2513-01 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2003,ASTM,"D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2004,ASTM,"D2513-04 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2005,ASTM,"D2513-05 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2006,ASTM,"D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2007,ASTM,"D2513-07b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08a  Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2008,ASTM,"D2513-08b  Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2000,ASTM,"D2517-00 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2005,ASTM,"D2517-05 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2006,ASTM,"D2517-06 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2002,ASTM,"D256-02 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2003,ASTM,"D256-03 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2004,ASTM,"D256-04 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2005,ASTM,"D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2005,ASTM,"D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2006,ASTM,"D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2006,ASTM,"D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2002,ASTM,"D2564-02 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2004,ASTM,"D2564-04 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
1996,ASTM,"D2564-96a Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
1999,ASTM,"D2565-99 Standard Practice for  Xenon Arc Exposure of Plastics Intended for Outdoor Applications"
2008,ASTM,"D2565-99(2008)  Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications"
2001,ASTM,"D2581-01 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2002,ASTM,"D2581-02 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
1996,ASTM,"D2581-96 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2000,ASTM,"D2582-00 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2003,ASTM,"D2582-03 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2007,ASTM,"D2582-07 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2008,ASTM,"D2582-08 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2006,ASTM,"D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2007,ASTM,"D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
1995,ASTM,"D2583-95 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2000,ASTM,"D2609-00 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2002,ASTM,"D2609-02 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2008,ASTM,"D2609-02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2003,ASTM,"D2657-03 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
2007,ASTM,"D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
1997,ASTM,"D2657-97 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings"
2000,ASTM,"D2661-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2661-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2661-02 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2006,ASTM,"D2661-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2661-08 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2000,ASTM,"D2665-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2665-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2007,ASTM,"D2665-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08b Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2009,ASTM,"D2665-09 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1996,ASTM,"D2672-96a Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2003,ASTM,"D2672-96a(2003) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2001,ASTM,"D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
2009,ASTM,"D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
1995,ASTM,"D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping"
2004,ASTM,"D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
1998,ASTM,"D2683-98 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
2003,ASTM,"D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
1996,ASTM,"D2729-96a Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2001,ASTM,"D2737-01 Standard Specification for Polyethylene (PE) Plastic Tubing"
2003,ASTM,"D2737-03 Standard Specification for Polyethylene (PE) Plastic Tubing"
1999,ASTM,"D2737-99 Standard Specification for Polyethylene (PE) Plastic Tubing"
2005,ASTM,"D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings"
1996,ASTM,"D2751-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings"
2001,ASTM,"D2774-01 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2004,ASTM,"D2774-04 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2008,ASTM,"D2774-08  Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
1994,ASTM,"D2774-94 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2001,ASTM,"D2837-01 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2001,ASTM,"D2837-01a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2002,ASTM,"D2837-02 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2004,ASTM,"D2837-04 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2008,ASTM,"D2837-08 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
1998,ASTM,"D2837-98a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2001,ASTM,"D2842-01 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
2006,ASTM,"D2842-06 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
1997,ASTM,"D2842-97 Standard Test Method for Water Absorption of Rigid Cellular Plastics"
1999,ASTM,"D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2004,ASTM,"D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2006,ASTM,"D2846/D2846M-06 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D2846/D2846M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1999,ASTM,"D2846/D2846M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1996,ASTM,"D2855-96 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2002,ASTM,"D2855-96(2002) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2000,ASTM,"D2949-00 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2949-01 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2001,ASTM,"D2949-01a Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2006,ASTM,"D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2000,ASTM,"D2996-00 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D2996-01 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1995,ASTM,"D2996-95 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D2997-01 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D2997-99 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2000,ASTM,"D3034-00 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2004,ASTM,"D3034-04 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2004,ASTM,"D3034-04a Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2006,ASTM,"D3034-06 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2008,ASTM,"D3034-08 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2001,ASTM,"D3035-01 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2003,ASTM,"D3035-03 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2003,ASTM,"D3035-03a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2006,ASTM,"D3035-06 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2008,ASTM,"D3035-08  Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
1995,ASTM,"D3035-95 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
1997,ASTM,"D3045-92(1997) Standard Practice for Heat Aging of Plastics Without Load"
2003,ASTM,"D3045-92(2003) Standard Practice for Heat Aging of Plastics Without Load"
2002,ASTM,"D3138-02 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2004,ASTM,"D3138-04 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
1995,ASTM,"D3138-95 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
1998,ASTM,"D3139-98 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2005,ASTM,"D3139-98(2005) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2007,ASTM,"D3212-07 Standard Specification for  Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
1996,ASTM,"D3212-96a Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2003,ASTM,"D3212-96a(2003) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2005,ASTM,"D3222-05 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
1999,ASTM,"D3222-99 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
2003,ASTM,"D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
1997,ASTM,"D3261-97 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2001,ASTM,"D3262-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2003,ASTM,"D3262-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2004,ASTM,"D3262-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2006,ASTM,"D3262-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
1996,ASTM,"D3262-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2000,ASTM,"D3299-00 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2008,ASTM,"D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2002,ASTM,"D3311-02 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2006,ASTM,"D3311-06 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2006,ASTM,"D3311-06a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2008,ASTM,"D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
1994,ASTM,"D3311-94 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2000,ASTM,"D3350-00 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2001,ASTM,"D3350-01 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2002,ASTM,"D3350-02 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2002,ASTM,"D3350-02a Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2004,ASTM,"D3350-04 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2005,ASTM,"D3350-05 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2006,ASTM,"D3350-06 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"
2008,ASTM,"D3350-08  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2001,ASTM,"D3453-01 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
2007,ASTM,"D3453-07 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
1996,ASTM,"D3453-96 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications"
2001,ASTM,"D3517-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2003,ASTM,"D3517-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2004,ASTM,"D3517-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2006,ASTM,"D3517-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
1996,ASTM,"D3517-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2003,ASTM,"D3574-03 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2005,ASTM,"D3574-05 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2008,ASTM,"D3574-08 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
1995,ASTM,"D3574-95 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams"
2000,ASTM,"D3575-00 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2001,ASTM,"D3676-01 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2007,ASTM,"D3676-07 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1996,ASTM,"D3676-96a Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1997,ASTM,"D3678-97 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2001,ASTM,"D3678-97(2001) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2001,ASTM,"D3679-01 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01b Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01c Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2002,ASTM,"D3679-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2002,ASTM,"D3679-02a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2005,ASTM,"D3679-05 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2006,ASTM,"D3679-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2006,ASTM,"D3679-06a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2008,ASTM,"D3679-08 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2009,ASTM,"D3679-09 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
1999,ASTM,"D3679-99 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2005,ASTM,"D3753-05 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
1999,ASTM,"D3753-99 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2001,ASTM,"D3754-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2003,ASTM,"D3754-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2004,ASTM,"D3754-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2006,ASTM,"D3754-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
1996,ASTM,"D3754-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2002,ASTM,"D3839-02 Standard Guide for Underground Installation of ""Fiberglass"" (Glass-FiberReinforced Thermosetting-Resin) Pipe"
2008,ASTM,"D3839-08 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe"
1994,ASTM,"D3839-94a Standard Practice for Underground Installation of ""Fiberglass"" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D3840-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
2005,ASTM,"D3840-01(2005) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
1999,ASTM,"D3840-99 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
1997,ASTM,"D3841-97 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2001,ASTM,"D3841-97(2001) Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2004,ASTM,"D3965-04 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2005,ASTM,"D3965-05 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
1999,ASTM,"D3965-99 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2001,ASTM,"D4065-01 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
2006,ASTM,"D4065-06 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
1995,ASTM,"D4065-95 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures"
2001,ASTM,"D4068-01 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
1999,ASTM,"D4068-99 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
2001,ASTM,"D4097-01 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2000,ASTM,"D4101-00 Standard Specification for Polypropylene Injection and Extrusion Materials"
2001,ASTM,"D4101-01 Standard Specification for Polypropylene Injection and Extrusion Materials"
2001,ASTM,"D4101-01a Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02 Standard Specification for Polypropylene Injection and Extrusion Materials"
2007,ASTM,"D4101-07 Standard Specification for Polypropylene Injection and Extrusion Materials"
2008,ASTM,"D4101-08 Standard Specification for Polypropylene Injection and Extrusion Materials"
1996,ASTM,"D4161-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2003,ASTM,"D4216-03 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds"
2006,ASTM,"D4216-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2000,ASTM,"D4226-00 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2005,ASTM,"D4226-05 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2003,ASTM,"D4272-03 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop"
2008,ASTM,"D4272-08a Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
1999,ASTM,"D4272-99 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop"
2000,ASTM,"D4397-00 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2002,ASTM,"D4397-02 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2008,ASTM,"D4397-08 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2004,ASTM,"D4477-04 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2004,ASTM,"D4477-04a Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2008,ASTM,"D4477-08 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
1996,ASTM,"D4477-96a Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
1996,ASTM,"D4551-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
2002,ASTM,"D4673-02 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2008,ASTM,"D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2000,ASTM,"D4726-00 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2001,ASTM,"D4726-01 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2002,ASTM,"D4726-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2002,ASTM,"D4756-02 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2002,ASTM,"D4756-02a Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2003,ASTM,"D4756-03 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2006,ASTM,"D4756-06 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
1996,ASTM,"D4756-96 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2001,ASTM,"D4802-01 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2002,ASTM,"D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
1994,ASTM,"D4802-94 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2000,ASTM,"D4976-00b Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2002,ASTM,"D4976-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2006,ASTM,"D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2006,ASTM,"D5206-06a Standard Test Method for Windload Resistance of Rigid Plastic Siding"
1996,ASTM,"D5206-96 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
1998,ASTM,"D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
2000,ASTM,"D5421-00 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2005,ASTM,"D5421-05 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
1993,ASTM,"D5421-93 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2006,ASTM,"D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents"
1995,ASTM,"D543-95 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents"
2001,ASTM,"D543-95(2001) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents"
2001,ASTM,"D5685-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2002,ASTM,"D5685-02 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2005,ASTM,"D5685-05 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
1995,ASTM,"D5685-95 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
1998,ASTM,"D570-98 Standard Test Method for Water Absorption of Plastics"
2005,ASTM,"D570-98(2005) Standard Test Method for Water Absorption of Plastics"
2001,ASTM,"D5926-01 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2004,ASTM,"D5926-04 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
1996,ASTM,"D5926-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
1997,ASTM,"D6098-97 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2003,ASTM,"D6098-97(2003) Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2003,ASTM,"D6108-03 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
1997,ASTM,"D6108-97 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
2003,ASTM,"D6109-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber"
2005,ASTM,"D6109-05 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products"
2002,ASTM,"D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2005,ASTM,"D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2005,ASTM,"D6110-05a Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2006,ASTM,"D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2008,ASTM,"D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
1997,ASTM,"D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2003,ASTM,"D6111-03 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
1997,ASTM,"D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
2000,ASTM,"D618-00 Standard Practice for Conditioning Plastics for Testing"
2005,ASTM,"D618-05 Standard Practice for Conditioning Plastics for Testing"
2008,ASTM,"D618-08 Standard Practice for Conditioning Plastics for Testing"
2003,ASTM,"D635-03 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position"
2006,ASTM,"D635-06 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position"
1998,ASTM,"D635-98 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position"
2000,ASTM,"D638-00 Standard Test Method for Tensile Properties of Plastics"
2001,ASTM,"D638-01 Standard Test Method for Tensile Properties of Plastics"
2002,ASTM,"D638-02 Standard Test Method for Tensile Properties of Plastics"
2002,ASTM,"D638-02a Standard Test Method for Tensile Properties of Plastics"
2003,ASTM,"D638-03 Standard Test Method for Tensile Properties of Plastics"
2008,ASTM,"D638-08 Standard Test Method for Tensile Properties of Plastics"
1999,ASTM,"D638-99 Standard Test Method for Tensile Properties of Plastics"
2000,ASTM,"D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position"
2001,ASTM,"D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position"
2004,ASTM,"D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position"
2006,ASTM,"D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position"
2007,ASTM,"D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position"
2001,ASTM,"D6662-01 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2006,ASTM,"D6662-06 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2007,ASTM,"D6662-07 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2002,ASTM,"D695-02 Standard Test Method for Compressive Properties of Rigid Plastics"
2002,ASTM,"D695-02a Standard Test Method for Compressive Properties of Rigid Plastics"
1996,ASTM,"D695-96 Standard Test Method for Compressive Properties of Rigid Plastics"
2003,ASTM,"D696-03 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer"
2008,ASTM,"D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer"
1998,ASTM,"D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer"
2002,ASTM,"D732-02 Standard Test Method for Shear Strength of Plastics by Punch Tool"
1999,ASTM,"D732-99 Standard Test Method for Shear Strength of Plastics by Punch Tool"
2004,ASTM,"D746-04 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact"
2007,ASTM,"D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact"
2002,ASTM,"D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam"
2008,ASTM,"D747-08 Standard Test Method for  Apparent Bending Modulus of Plastics by Means of a Cantilever Beam"
1999,ASTM,"D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam"
2003,ASTM,"D785-03 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials"
2008,ASTM,"D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials"
2007,ASTM,"D790-07 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2008,ASTM,"D792-08 Standard Test Methods for  Density and Specific Gravity (Relative Density) of Plastics by Displacement"
2000,ASTM,"D882-00 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2001,ASTM,"D882-01 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2002,ASTM,"D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2009,ASTM,"D882-09 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2002,ASTM,"D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials"
1995,ASTM,"D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials"
1998,ASTM,"F1055-98 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2000,ASTM,"F1281-00 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"F1281-01 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"F1281-01a Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1281-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2005,ASTM,"F1281-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2007,ASTM,"F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2000,ASTM,"F1282-00 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2001,ASTM,"F1282-01 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2001,ASTM,"F1282-01a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2003,ASTM,"F1282-03 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2006,ASTM,"F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
1998,ASTM,"F1290-98a Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2004,ASTM,"F1290-98a(2004) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2000,ASTM,"F1412-00 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2001,ASTM,"F1412-01 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2009,ASTM,"F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
1998,ASTM,"F1417-92(1998) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2005,ASTM,"F1417-92(2005) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2000,ASTM,"F1488-00 Standard Specification for Coextruded Composite Pipe"
2003,ASTM,"F1488-03 Standard Specification for Coextruded Composite Pipe"
2000,ASTM,"F1499-00 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2001,ASTM,"F1499-01 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2008,ASTM,"F1499-01(2008) Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2008,ASTM,"F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe"
1996,ASTM,"F1668-96 Standard Guide for Construction Procedures for Buried Plastic Pipe"
2002,ASTM,"F1668-96(2002) Standard Guide for Construction Procedures for Buried Plastic Pipe"
2002,ASTM,"F1673-02 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2004,ASTM,"F1673-04 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
1995,ASTM,"F1673-95 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
1997,ASTM,"F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2004,ASTM,"F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2002,ASTM,"F1807-02 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1807-02a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F1807-03 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1807-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1807-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1807-07 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1807-07a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1866-05 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
2007,ASTM,"F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
1998,ASTM,"F1866-98 Standard Specification for Poly  (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings"
2005,ASTM,"F1924-05 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
1998,ASTM,"F1924-98 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2000,ASTM,"F1960-00 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1960-02b Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F1960-03 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F1960-05 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1960-07 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2007,ASTM,"F1960-07a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene"
2008,ASTM,"F1960-08 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1973-02 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems"
2005,ASTM,"F1973-05 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems"
2008,ASTM,"F1973-08  Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems"
1999,ASTM,"F1973-99 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
2000,ASTM,"F1974-00a Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2001,ASTM,"F1974-01 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2002,ASTM,"F1974-02 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2008,ASTM,"F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2000,ASTM,"F1986-00a Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2006,ASTM,"F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2001,ASTM,"F2080-01 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2002,ASTM,"F2080-02 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2005,ASTM,"F2080-05 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2008,ASTM,"F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2001,ASTM,"F2098-01 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
2004,ASTM,"F2098-04 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
2008,ASTM,"F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings"
2001,ASTM,"F2159-01 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F2159-02 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F2159-03 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2005,ASTM,"F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2003,ASTM,"F2262-03 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2004,ASTM,"F2262-04 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2005,ASTM,"F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2007,ASTM,"F2306/F2306M-07 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2008,ASTM,"F2306/F2306M-08 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2004,ASTM,"F2389-04 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2005,ASTM,"F2389-05 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2006,ASTM,"F2389-06 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2007,ASTM,"F2389-07 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2004,ASTM,"F2434-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2008,ASTM,"F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2007,ASTM,"F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2008,ASTM,"F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2005,ASTM,"F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
1999,ASTM,"F402-93(1999) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
2005,ASTM,"F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings"
1997,ASTM,"F405-97 Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings"
2002,ASTM,"F409-02 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
2008,ASTM,"F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
1999,ASTM,"F409-99a Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings"
2006,ASTM,"F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"F438-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2004,ASTM,"F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
1999,ASTM,"F438-99 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2001,ASTM,"F439-01 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F439-02 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2005,ASTM,"F439-05 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2006,ASTM,"F439-06 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F439-99a Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F441/F441M-02 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2008,ASTM,"F441/F441M-02(2008) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
1999,ASTM,"F441/F441M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
1999,ASTM,"F442/F442M-99 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)"
2005,ASTM,"F442/F442M-99(2005) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)"
2002,ASTM,"F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
1997,ASTM,"F449-97 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2002,ASTM,"F477-02 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2007,ASTM,"F477-07 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2008,ASTM,"F477-08 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
1999,ASTM,"F477-99 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2000,ASTM,"F480-00 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F480-02 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2006,ASTM,"F480-06a Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2006,ASTM,"F480-06b Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F481-97(2002) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
2008,ASTM,"F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
2004,ASTM,"F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
1997,ASTM,"F493-97 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
2006,ASTM,"F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
1995,ASTM,"F512-95 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2001,ASTM,"F512-95(2001) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2000,ASTM,"F628-00 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2001,ASTM,"F628-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2006,ASTM,"F628-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2008,ASTM,"F628-08 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
2002,ASTM,"F645-02 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems"
2004,ASTM,"F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems"
2002,ASTM,"F656-02 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2008,ASTM,"F656-08 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
1996,ASTM,"F656-96a Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2006,ASTM,"F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings"
1997,ASTM,"F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings"
2000,ASTM,"F679-00a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2001,ASTM,"F679-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2003,ASTM,"F679-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2006,ASTM,"F679-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2006,ASTM,"F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2008,ASTM,"F679-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings"
2000,ASTM,"F714-00 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2001,ASTM,"F714-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2003,ASTM,"F714-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2005,ASTM,"F714-05 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2006,ASTM,"F714-06 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2006,ASTM,"F714-06a Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2000,ASTM,"F758-95(2000) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage"
1999,ASTM,"F771-99 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2005,ASTM,"F771-99(2005) Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2001,ASTM,"F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2003,ASTM,"F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
1999,ASTM,"F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2001,ASTM,"F810-01 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
2007,ASTM,"F810-07 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
1999,ASTM,"F810-99 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
2000,ASTM,"F876-00 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F876-02 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03a Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2004,ASTM,"F876-04 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2005,ASTM,"F876-05 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2006,ASTM,"F876-06 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2007,ASTM,"F876-07 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2008,ASTM,"F876-08a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2008,ASTM,"F876-08b Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2000,ASTM,"F877-00 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2001,ASTM,"F877-01 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02a Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2005,ASTM,"F877-05 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2007,ASTM,"F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2000,ASTM,"F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2004,ASTM,"F891-04 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2007,ASTM,"F891-07 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2005,ASTM,"F894-05 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2006,ASTM,"F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2007,ASTM,"F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
1998,ASTM,"F894-98a Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe"
2000,ASTM,"F949-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2001,ASTM,"F949-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2001,ASTM,"F949-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2003,ASTM,"F949-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2006,ASTM,"F949-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2006,ASTM,"F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2009,ASTM,"D1004-09 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting"
2009,ASTM,"D1623-09 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics"
2009,ASTM,"D1709-09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
2009,ASTM,"D2126-09 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging"
2009,ASTM,"D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials"
2009,ASTM,"D2582-09 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting"
2009,ASTM,"D2672-96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement"
2009,ASTM,"D2846/D2846M-09a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D2846/D2846M-09b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D3311-09 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2009,ASTM,"D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2009,ASTM,"D4101-09 Standard Specification for Polypropylene Injection and Extrusion Materials"
2009,ASTM,"D4272-09 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2009,ASTM,"D4397-09 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2009,ASTM,"D4726-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2009,ASTM,"D5926-09 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2009,ASTM,"D6108-09 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
2009,ASTM,"D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
2009,ASTM,"D6662-09 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2009,ASTM,"F1488-09 Standard Specification for Coextruded Composite Pipe"
2009,ASTM,"F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2009,ASTM,"F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9"
2009,ASTM,"F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2009,ASTM,"F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2009,ASTM,"F439-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2009,ASTM,"F441/F441M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2009,ASTM,"F442/F442M-09 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2009,ASTM,"F876-09 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2009,ASTM,"F891-09 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2009,ASTM,"F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2009,ASTM,"C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
2006,ASTM,"D1042-06 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions"
2007,ASTM,"D1239-07 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals"
2008,ASTM,"D1243-95(2008) Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers"
2008,ASTM,"D1430-03(2008) Standard Classification System for  Polychlorotrifluoroethylene (PCTFE) Plastics"
2005,ASTM,"D1599-99(2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings"
2004,ASTM,"D1601-99(2004) Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers"
2008,ASTM,"D1710-08 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes"
2009,ASTM,"D1746-09 Standard Test Method for Transparency of Plastic Sheeting"
2009,ASTM,"D1755-09 Standard Specification for Poly(Vinyl Chloride) Resins"
2005,ASTM,"D1763-00(2005) Standard Specification for Epoxy Resins"
2008,ASTM,"D1790-08 Standard Test Method for  Brittleness Temperature of Plastic Sheeting by Impact"
2002,ASTM,"D1824-95(2002) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates"
2008,ASTM,"D1894-08 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2006,ASTM,"D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials"
2009,ASTM,"D1922-09 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2008,ASTM,"D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method"
2005,ASTM,"D1972-97(2005) Standard Practice for Generic Marking of Plastic Products"
2004,ASTM,"D2115-04 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
2007,ASTM,"D2116-07 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials"
2004,ASTM,"D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique"
2009,ASTM,"D2222-09 Standard Test Method for Methanol Extract of Vinyl Chloride Resins"
2004,ASTM,"D2238-92(2004) Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm"
2008,ASTM,"D2290-08 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2009,ASTM,"D2291-09 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites"
2009,ASTM,"D2343-09 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics"
2009,ASTM,"D2383-09 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
2004,ASTM,"D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2005,ASTM,"D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
2002,ASTM,"D2538-02 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
2005,ASTM,"D2561-95(2005) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
2008,ASTM,"D2562-94(2008) Standard Practice for  Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2008,ASTM,"D2563-08 Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
2009,ASTM,"D2578-09 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2008,ASTM,"D2584-08 Standard Test Method for  Ignition Loss of Cured Reinforced Resins"
2005,ASTM,"D2659-95(2005) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2009,ASTM,"D2673-09 Standard Specification for Oriented Polypropylene Film"
2008,ASTM,"D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
2009,ASTM,"D2734-09 Standard Test Methods for Void Content of Reinforced Plastics"
2005,ASTM,"D2741-95(2005) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
2008,ASTM,"D2749-02(2008) Standard Symbols for Dimensions of Plastic Pipe Fittings"
2006,ASTM,"D2765-01(2006) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2009,ASTM,"D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2008,ASTM,"D2852-95(2008) Standard Specification for  Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2007,ASTM,"D2857-95(2007) Standard Practice for Dilute Solution Viscosity of Polymers"
2005,ASTM,"D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2008,ASTM,"D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2006,ASTM,"D2924-01(2006) Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2009,ASTM,"D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
2007,ASTM,"D3012-07 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven"
2004,ASTM,"D3014-04a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2006,ASTM,"D3030-95(2006) Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2009,ASTM,"D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2009,ASTM,"D3123-09 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds"
2003,ASTM,"D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2006,ASTM,"D3159-06 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2008,ASTM,"D3275-08 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2003,ASTM,"D3291-97(2003) Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
2006,ASTM,"D3295-06 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2008,ASTM,"D3296-03(2008) Standard Specification for FEP-Fluorocarbon Tube"
2006,ASTM,"D3308-06 Standard Specification for PTFE Resin Skived Tape"
2008,ASTM,"D3354-08 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2004,ASTM,"D3364-99(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
2009,ASTM,"D3367-09 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
2008,ASTM,"D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry"
2006,ASTM,"D3419-00(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2008,ASTM,"D3420-08 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2006,ASTM,"D3489-06 Standard Test Methods for Microcellular Urethane Materials"
2006,ASTM,"D3567-97(2006) Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2003,ASTM,"D3591-97(2003) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
2006,ASTM,"D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2007,ASTM,"D3595-02(2007) Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
2009,ASTM,"D3596-09 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2009,ASTM,"D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
2009,ASTM,"D3675-09a Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2006,ASTM,"D3681-06 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2009,ASTM,"D3748-09 Standard Practice for Evaluating High-Density Rigid Cellular Plastics"
2008,ASTM,"D3749-08 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
2006,ASTM,"D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery"
2006,ASTM,"D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer"
2006,ASTM,"D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials"
2008,ASTM,"D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
2008,ASTM,"D3846-08 Standard Test Method for  In-Plane Shear Strength of Reinforced Plastics"
2007,ASTM,"D3851-07 Standard Specification for Urethane Microcellular Shoe Soling Materials"
2009,ASTM,"D3892-93(2009) Standard Practice for Packaging/Packing of Plastics"
2007,ASTM,"D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2008,ASTM,"D3914-02(2008) Standard Test Method for  In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
2006,ASTM,"D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2003,ASTM,"D3918-96(2003) Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2009,ASTM,"D3935-09 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2009,ASTM,"D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2008,ASTM,"D3982-08  Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts"
2006,ASTM,"D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering"
2005,ASTM,"D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2005,ASTM,"D4024-05 Standard Specification for Machine Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2003,ASTM,"D4067-03 Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
2007,ASTM,"D4092-07 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
2007,ASTM,"D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers"
2007,ASTM,"D4167-97(2007) Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2007,ASTM,"D4203-07 Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2006,ASTM,"D4204-06 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study"
2008,ASTM,"D4218-96(2008) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
2005,ASTM,"D4273-05 Standard Test Methods for Polyurethane Raw Materials  Determination of Primary Hydroxyl Content of Polyether Polyols"
2005,ASTM,"D4274-05 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols"
2009,ASTM,"D4275-09 Standard Test Method for  Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
2009,ASTM,"D4321-09 Standard Test Method for Package Yield of Plastic Film"
2005,ASTM,"D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics"
2004,ASTM,"D4349-96(2004) Classification System for Polyphenylene Ether (PPE) Materials"
2005,ASTM,"D4350-00(2005) Standard Test Method for Corrosivity Index of Plastics and Fillers"
2005,ASTM,"D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2006,ASTM,"D4396-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications"
2007,ASTM,"D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
2008,ASTM,"D4440-08 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2007,ASTM,"D4443-07 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2006,ASTM,"D4459-06 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2008,ASTM,"D4473-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2008,ASTM,"D4475-02(2008) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2005,ASTM,"D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2007,ASTM,"D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2003,ASTM,"D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2007,ASTM,"D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2003,ASTM,"D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2004,ASTM,"D4634-04 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2008,ASTM,"D4635-08a Standard Specification for  Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2009,ASTM,"D4659-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
2006,ASTM,"D4660-06 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2009,ASTM,"D4661-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
2008,ASTM,"D4662-08  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2007,ASTM,"D4669-07 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2007,ASTM,"D4670-07 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2005,ASTM,"D4671-05 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
2002,ASTM,"D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2008,ASTM,"D4745-08 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2003,ASTM,"D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2009,ASTM,"D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2006,ASTM,"D4812-06 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2005,ASTM,"D4819-96(2005) Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics"
2005,ASTM,"D4875-05 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
2008,ASTM,"D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2004,ASTM,"D4889-04 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
2006,ASTM,"D4890-06 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
2007,ASTM,"D4894-07 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
2007,ASTM,"D4969-07 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2007,ASTM,"D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)"
2007,ASTM,"D5024-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression"
2005,ASTM,"D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2006,ASTM,"D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2009,ASTM,"D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2009,ASTM,"D5047-09 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2009,ASTM,"D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
2006,ASTM,"D5071-06 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2009,ASTM,"D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2004,ASTM,"D5132-04 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2006,ASTM,"D5138-06 Standard Classification System for Liquid Crystal Polymers (LCP)"
2007,ASTM,"D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
2006,ASTM,"D5204-06 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2003,ASTM,"D5205-96(2003) Standard Classification System for Polyetherimide (PEI) Materials"
2009,ASTM,"D5207-09 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials"
2009,ASTM,"D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2007,ASTM,"D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
2006,ASTM,"D5224-00(2006) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2009,ASTM,"D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
2004,ASTM,"D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2008,ASTM,"D5279-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion"
2005,ASTM,"D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
2009,ASTM,"D5336-09 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2003,ASTM,"D5338-98(2003) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions"
2006,ASTM,"D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2007,ASTM,"D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
2006,ASTM,"D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics"
2009,ASTM,"D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2008,ASTM,"D5436-03(2008) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2008,ASTM,"D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2002,ASTM,"D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2004,ASTM,"D5523-04 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2002,ASTM,"D5526-94(2002) Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2007,ASTM,"D5575-07 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
2006,ASTM,"D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)"
2004,ASTM,"D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2005,ASTM,"D5629-05 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2006,ASTM,"D5630-06 Standard Test Method for Ash Content in Plastics"
2009,ASTM,"D5672-09 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
2004,ASTM,"D5675-04 Standard Specification for Fluoropolymer Micropowders"
2005,ASTM,"D5677-05 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2009,ASTM,"D5740-09 Standard Guide for Writing Material Standards in the Classification D4000 Format"
2007,ASTM,"D5748-95(2007) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2008,ASTM,"D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2002,ASTM,"D5814-02 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
2009,ASTM,"D5857-09 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5870-95(2003) Standard Practice for Calculating Property Retention Index of Plastics"
2009,ASTM,"D5927-09 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2009,ASTM,"D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
2009,ASTM,"D5946-09 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2006,ASTM,"D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2003,ASTM,"D5988-03 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting"
2005,ASTM,"D5989-05 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2009,ASTM,"D5991-09 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2006,ASTM,"D6040-06 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2009,ASTM,"D6042-09 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2002,ASTM,"D6070-02 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2008,ASTM,"D6099-08 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
2005,ASTM,"D6100-05 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
2005,ASTM,"D6112-97(2005) Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2005,ASTM,"D6117-97(2005) Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
2009,ASTM,"D6150-09 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
2004,ASTM,"D6247-98(2004) Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry"
2004,ASTM,"D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2009,ASTM,"D6265-09 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
2009,ASTM,"D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens"
2009,ASTM,"D6288-09 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2008,ASTM,"D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
2005,ASTM,"D6290-05 Standard Test Method for Color Determination of Plastic Pellets"
2005,ASTM,"D6339-05 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2007,ASTM,"D6340-98(2007) Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment"
2005,ASTM,"D6341-98(2005) Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)"
2008,ASTM,"D6342-08 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
2006,ASTM,"D6358-06 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods"
2007,ASTM,"D6360-07 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2004,ASTM,"D6400-04 Standard Specification for Compostable Plastics"
2008,ASTM,"D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2005,ASTM,"D6437-05 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
2004,ASTM,"D6456-99(2004) Standard Specification for Finished Parts Made from Polyimide Resin"
2008,ASTM,"D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
2006,ASTM,"D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2007,ASTM,"D6576-07 Standard Specification for Flexible Cellular Rubber Chemically Blown"
2005,ASTM,"D6585-05 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2009,ASTM,"D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes"
2009,ASTM,"D6713-01(2009) Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)"
2006,ASTM,"D6778-06 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2005,ASTM,"D6783-05 Standard Specification for Polymer Concrete Pipe"
2008,ASTM,"D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)"
2009,ASTM,"D6867-03(2009) Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2008,ASTM,"D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen"
2009,ASTM,"D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight"
2008,ASTM,"D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2009,ASTM,"D7029-09 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]"
2004,ASTM,"D704-99(2004) Standard Specification for Melamine-Formaldehyde Molding Compounds"
2004,ASTM,"D705-99(2004) Standard Specification for Urea-Formaldehyde Molding Compounds"
2006,ASTM,"D7211-06 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use"
2007,ASTM,"D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2009,ASTM,"D787-09 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds"
2006,ASTM,"D788-06 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2007,ASTM,"D789-07 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)"
2008,ASTM,"D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics"
2006,ASTM,"D957-06 Standard Practice for Determining Surface Temperature of Molds for Plastics"
2008,ASTM,"E1788-08 Standard Test Method for Acidity in Acrylonitrile"
2007,ASTM,"E1863-07 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
2006,ASTM,"F1025-94(2006) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2008,ASTM,"F1041-02(2008) Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2004,ASTM,"F1056-04 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
2009,ASTM,"F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2009,ASTM,"F1365-91(2009) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
2009,ASTM,"F1429-99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
2007,ASTM,"F1473-07 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2005,ASTM,"F1483-05 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2008,ASTM,"F1498-08 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2002,ASTM,"F1504-02 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
2009,ASTM,"F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2007,ASTM,"F1563-01(2007) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2007,ASTM,"F1588-96(2007) Standard Test Method for  Constant Tensile Load Joint Test (CTLJT)"
2009,ASTM,"F1675-09 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
2008,ASTM,"F1698-02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2005,ASTM,"F1732-96(2005) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material"
2007,ASTM,"F1733-07 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2009,ASTM,"F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2008,ASTM,"F1741-08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2008,ASTM,"F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2004,ASTM,"F1802-04 Standard Test Method for Performance Testing of Excess Flow Valves"
2006,ASTM,"F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
2008,ASTM,"F1804-08 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2006,ASTM,"F1867-06 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2004,ASTM,"F1947-04 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
2005,ASTM,"F1948-05 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2005,ASTM,"F1970-05 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
2006,ASTM,"F1987-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2006,ASTM,"F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2009,ASTM,"F2019-03(2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2006,ASTM,"F2021-06 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems"
2007,ASTM,"F2135-01(2007) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2008,ASTM,"F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2009,ASTM,"F2138-09 Standard Specification for Excess Flow Valves for Natural Gas Service"
2009,ASTM,"F2145-09 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing"
2008,ASTM,"F2158-08 Standard Specification for Residential Central-Vacuum Tube and Fittings"
2007,ASTM,"F2164-02(2007) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2008,ASTM,"F2165-02(2008) Standard Specification for Flexible Pre-Insulated Piping"
2009,ASTM,"F2176-02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct"
2006,ASTM,"F2207-06 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe"
2008,ASTM,"F2231-02(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2007,ASTM,"F2435-07 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2007,ASTM,"F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes"
2006,ASTM,"F2536-06b Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2008,ASTM,"F2562/F2562M-08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure  Drainage and Sewerage"
2009,ASTM,"F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing"
2008,ASTM,"F2649-08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks"
2009,ASTM,"F412-09 Standard Terminology Relating to  Plastic Piping Systems"
2007,ASTM,"F585-94(2007) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2004,ASTM,"F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2004,ASTM,"F905-04 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints"
2008,ASTM,"F913-02(2008) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2006,ASTM,"F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2009,ASTM,"D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam"
2009,ASTM,"D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics"
2009,ASTM,"D1562-09 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds"
2009,ASTM,"D1598-02(2009) Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2009,ASTM,"D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining"
2010,ASTM,"D1786-10 Standard Specification for Toluene Diisocyanate"
2009,ASTM,"D1823-95(2009) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer"
2010,ASTM,"D1895-96(2010) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials"
2009,ASTM,"D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2010,ASTM,"D2287-96(2010) Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds"
2009,ASTM,"D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2009,ASTM,"D2513-09a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
2010,ASTM,"D3016-97(2010) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
2009,ASTM,"D3294-09 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
2010,ASTM,"D3350-10  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2010,ASTM,"D3368-04(2010) Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
2009,ASTM,"D3679-09a Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2010,ASTM,"D4097-01(2010) Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2009,ASTM,"D4226-09 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2010,ASTM,"D4441-04(2010) Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2009,ASTM,"D4477-09 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2010,ASTM,"D4877-10 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
2009,ASTM,"D4968-09 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2010,ASTM,"D4986-10 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2010,ASTM,"D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2009,ASTM,"D6691-09 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum"
2009,ASTM,"D706-09 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds"
2009,ASTM,"D707-09 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds"
2010,ASTM,"D7251-10 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2009,ASTM,"D732-09 Standard Test Method for Shear Strength of Plastics by Punch Tool"
2009,ASTM,"F1735-09  Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2008,ASTM,"F1807-08  Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1807-09  Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1960-09a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2009,ASTM,"F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2009,ASTM,"F2080-09 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2009,ASTM,"F2159-09 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2010,ASTM,"F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2009,ASTM,"F2418-09a Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2009,ASTM,"F2433-05(2009) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness"
2009,ASTM,"F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2009,ASTM,"F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2008,ASTM,"F449-02(2008) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2008,ASTM,"F714-08 Standard Specification for  Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2010,ASTM,"F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings"
2010,ASTM,"D1238-10 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2010,ASTM,"D1621-10 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics"
2010,ASTM,"D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens"
2010,ASTM,"D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2010,ASTM,"D2152-95(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
2010,ASTM,"D2647-10 Standard Specification for Crosslinkable Ethylene Plastics"
2010,ASTM,"D2683-10 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"
2010,ASTM,"D2855-96(2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings"
2010,ASTM,"D3261-10 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2010,ASTM,"D3261-10a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"
2010,ASTM,"D4101-10 Standard Specification for Polypropylene Injection and Extrusion Materials"
2004,ASTM,"D494-04 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products"
2010,ASTM,"D5083-10 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2010,ASTM,"D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2002,ASTM,"D6777-02 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2004,ASTM,"D6865-04 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials"
2003,ASTM,"D6868-03 Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates"
2003,ASTM,"D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2010,ASTM,"D695-10 Standard Test Method for  Compressive Properties of Rigid Plastics"
2003,ASTM,"D6953-03 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)"
2004,ASTM,"D6954-04 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation"
2004,ASTM,"D7026-04 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis"
2004,ASTM,"D7075-04 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products"
2005,ASTM,"D7081-05 Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment"
2004,ASTM,"D7083-04 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography"
2004,ASTM,"D7107-04 Standard Test Method for Creep Measurement of Self-Lubricating Bushings"
2005,ASTM,"D7132-05 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam"
2005,ASTM,"D7133-05 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids"
2005,ASTM,"D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)"
2010,ASTM,"D7192-10 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2005,ASTM,"D7193-05 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2005,ASTM,"D7194-05 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene"
2006,ASTM,"D7209-06 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products"
2006,ASTM,"D7210-06 Standard Practice for Extraction of Additives in Polyolefin Plastics"
2006,ASTM,"D7252-06 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates"
2006,ASTM,"D7253-06 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols"
2007,ASTM,"D7254-07 Standard Specification for Polypropylene (PP) Siding"
2009,ASTM,"D7258-09 Standard Specification for Polymeric Piles"
2007,ASTM,"D7310-07 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors"
2009,ASTM,"D7445-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)"
2010,ASTM,"D747-10 Standard Test Method for  Apparent Bending Modulus of Plastics by Means of a Cantilever Beam"
2009,ASTM,"D7471-09 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials"
2009,ASTM,"D7472-09 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials"
2008,ASTM,"D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis"
2008,ASTM,"D7487-08 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2009,ASTM,"D7567-09 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction"
2010,ASTM,"D790-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2010,ASTM,"F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2009,ASTM,"F1533-01(2009) Standard Specification for Deformed Polyethylene (PE) Liner"
2005,ASTM,"F1606-05 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner"
2010,ASTM,"F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications"
2010,ASTM,"F1807-10 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2010,ASTM,"F2159-10 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2010,ASTM,"F2160-10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2010,ASTM,"F2206-02(2010) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2006,ASTM,"F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type"
2007,ASTM,"F2390-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content"
2006,ASTM,"F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2009,ASTM,"F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems"
2007,ASTM,"F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method"
2007,ASTM,"F2657-07 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing"
2007,ASTM,"F2658-07 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings"
2010,ASTM,"F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe"
2009,ASTM,"F2718-09 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines"
2009,ASTM,"F2719-09 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed  in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines"
2009,ASTM,"F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe"
2010,ASTM,"F2736-10 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe"
2010,ASTM,"F2737-10 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units"
2009,ASTM,"F2767-09 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution"
2009,ASTM,"F2768-09 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components"
2010,ASTM,"F2786-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)"
2009,ASTM,"F2787-09 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers"
2009,ASTM,"F2788-09 Standard Specification for Crosslinked Polyethylene (PEX) Pipe"
2009,ASTM,"F2805-09 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections"
2010,ASTM,"F2817-10 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair"
2010,ASTM,"F2818-10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing"
2009,ASTM,"F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter"
2010,ASTM,"F876-10 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2010,ASTM,"F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2010,ASTM,"D1043-10 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test"
2008,ASTM,"D1044-08 Standard Test Method for  Resistance of Transparent Plastics to Surface Abrasion"
2008,ASTM,"D1045-08 Standard Test Methods for  Sampling and Testing Plasticizers Used in Plastics"
2008,ASTM,"D1600-08 Standard Terminology for  Abbreviated Terms Relating to Plastics"
2008,ASTM,"D1693-08 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
2010,ASTM,"D1896/D1896M-10 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds"
2010,ASTM,"D2103-10 Standard Specification for Polyethylene Film and Sheeting"
2010,ASTM,"D2412-10 Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2008,ASTM,"D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2010,ASTM,"D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2010,ASTM,"D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2010,ASTM,"D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2010,ASTM,"D2839-10 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2010,ASTM,"D2863-10 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2010,ASTM,"D3045-92(2010) Standard Practice for Heat Aging of Plastics Without Load"
2010,ASTM,"D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2010,ASTM,"D3307-10 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2010,ASTM,"D3576-04(2010) Standard Test Method for Cell Size of Rigid Cellular Plastics"
2010,ASTM,"D3641-10 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2010,ASTM,"D3763-10 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2010,ASTM,"D3769-10 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2010,ASTM,"D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2008,ASTM,"D3826-98(2008) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
2008,ASTM,"D3917-08 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2010,ASTM,"D4000-10a Standard Classification System for  Specifying Plastic Materials"
2008,ASTM,"D4066-01a(2008) Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2009,ASTM,"D4068-09 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
2010,ASTM,"D4226-10 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2010,ASTM,"D4385-10 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics"
2010,ASTM,"D4663-10 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2010,ASTM,"D4703-10 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2010,ASTM,"D4802-10 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2010,ASTM,"D4895-10 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2010,ASTM,"D5155-10 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2008,ASTM,"D5272-08 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics"
2009,ASTM,"D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
2010,ASTM,"D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
2010,ASTM,"D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
2010,ASTM,"D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2010,ASTM,"D5998-10 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
2010,ASTM,"D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials"
2010,ASTM,"D6109-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products"
2010,ASTM,"D6110-10 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2010,ASTM,"D6226-10 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2010,ASTM,"D6261-10 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
2010,ASTM,"D6338-10 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods"
2010,ASTM,"D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position"
2010,ASTM,"D638-10 Standard Test Method for Tensile Properties of Plastics"
2010,ASTM,"D6394-10  Standard Specification for Sulfone Plastics (SP)"
2010,ASTM,"D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
2010,ASTM,"D6779-10 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2010,ASTM,"D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2008,ASTM,"D695-08 Standard Test Method for  Compressive Properties of Rigid Plastics"
2010,ASTM,"D7082-04(2010) Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe"
2010,ASTM,"D7191-10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor"
2010,ASTM,"D731-10 Standard Test Method for Molding Index of Thermosetting Molding Powder"
2010,ASTM,"D882-10 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2008,ASTM,"D883-08 Standard Terminology Relating to Plastics"
2010,ASTM,"D952-10 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials"
2010,ASTM,"D953-10 Standard Test Method for Bearing Strength of Plastics"
2010,ASTM,"F1057-10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2010,ASTM,"F1901-10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2010,ASTM,"F1960-10 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2010,ASTM,"F2023-10 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2010,ASTM,"F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems"
2010,ASTM,"F2806-10 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)"
2010,ASTM,"F477-10 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2010,ASTM,"F493-10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings"
2010,ASTM,"F610/F610M-10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2010,ASTM,"F656-10 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings"
2009,ASTM,"D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam (Redline)"
2009,ASTM,"D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics (Redline)"
2009,ASTM,"D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining (Redline)"
2005,ASTM,"D1763-00(2005) Standard Specification for Epoxy Resins (Redline)"
2010,ASTM,"D1896/D1896M-10 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds (Redline)"
2010,ASTM,"D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Redline)"
2008,ASTM,"D2563-08 Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Redline)"
2009,ASTM,"D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (Redline)"
2007,ASTM,"D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings (Redline)"
2010,ASTM,"D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Redline)"
2005,ASTM,"D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Redline)"
2009,ASTM,"D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting (Redline)"
2008,ASTM,"D3846-08 Standard Test Method for  In-Plane Shear Strength of Reinforced Plastics (Redline)"
2006,ASTM,"D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Redline)"
2009,ASTM,"D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications (Redline)"
2007,ASTM,"D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers (Redline)"
2007,ASTM,"D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure (Redline)"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Redline)"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics (Redline)"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater (Redline)"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique (Redline)"
2007,ASTM,"D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Redline)"
2008,ASTM,"D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials (Redline)"
2010,ASTM,"D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials (Redline)"
2010,ASTM,"D6456-10 Standard Specification for Finished Parts Made from Polyimide Resin (Redline)"
2008,ASTM,"D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Redline)"
2010,ASTM,"D747-10 Standard Test Method for  Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Redline)"
2008,ASTM,"D7474-08 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2010,ASTM,"F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems (Redline)"
2006,ASTM,"F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Redline)"
2009,ASTM,"F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing (Redline)"
2009,ASTM,"F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing (Redline)"
2009,ASTM,"F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing (Redline)"
2009,ASTM,"F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe (Redline)"
2010,ASTM,"D1203-10 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods"
2010,ASTM,"D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique"
2010,ASTM,"D1929-10 Standard Test Method for Determining Ignition Temperature of Plastics"
1996,ASTM,"D2235-96a Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
1999,ASTM,"D2239-99 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2004,ASTM,"D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2010,ASTM,"D2412-10a Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2004,ASTM,"D2513-04a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D3035-10  Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"
2010,ASTM,"D3350-10a  Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2010,ASTM,"D3840-10 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
2004,ASTM,"D4101-04a Standard Specification for Polypropylene Injection and Extrusion Materials"
2005,ASTM,"D4101-05 Standard Specification for Polypropylene Injection and Extrusion Materials"
2005,ASTM,"D4101-05a Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06 Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06a Standard Specification for Polypropylene Injection and Extrusion Materials"
2006,ASTM,"D4101-06b Standard Specification for Polypropylene Injection and Extrusion Materials"
2010,ASTM,"D4101-10a Standard Specification for Polypropylene Injection and Extrusion Materials"
2010,ASTM,"D4161-01(2010) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2010,ASTM,"D4397-10 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2001,ASTM,"D4551-96(2001) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
1998,ASTM,"D4673-98 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2000,ASTM,"D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2003,ASTM,"D790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2000,ASTM,"D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement"
1998,ASTM,"D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement"
2009,ASTM,"F1488-09e1 Standard Specification for Coextruded Composite Pipe"
1999,ASTM,"F1807-99 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1974-04 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2010,ASTM,"F714-10 Standard Specification for  Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter"
2008,ASTM,"F876-08 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2011,ASTM,"D2513-11 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D2665-10 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2010,ASTM,"D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2010,ASTM,"D3222-05(2010) Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials"
2010,ASTM,"D5421-05(2010) Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2011,ASTM,"D5685-11 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2011,ASTM,"D1003-11 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics"
2011,ASTM,"D1667-05(2011) Standard Specification for  Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)"
2011,ASTM,"D1784-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2011,ASTM,"D2235-04(2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2011,ASTM,"D2412-11 Standard Test Method for  Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading"
2011,ASTM,"D2513-11a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"D2661-11 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2665-11 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2011,ASTM,"D2837-11 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2009,ASTM,"D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2011,ASTM,"D3138-04(2011) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2011,ASTM,"D3311-11 Standard Specification for  Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2011,ASTM,"D4101-11 Standard Specification for Polypropylene Injection and Extrusion Materials"
2011,ASTM,"D5926-11 Standard Specification for  Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2010,ASTM,"D6098-10 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2011,ASTM,"F1290-98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings"
2011,ASTM,"F1417-11 Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air"
2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air"
2011,ASTM,"F1807-11 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F1807-11ae1 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F1960-11 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2011,ASTM,"F1960-11e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2011,ASTM,"F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F645-11 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems"
2011,ASTM,"F877-11 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems"
2006,ASTM,"D256-06ae1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2002,ASTM,"D256-02e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2000,ASTM,"D256-00e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics"
2007,ASTM,"F412-07 Standard Terminology Relating to  Plastic Piping Systems"
2006,ASTM,"F412-06 Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01ae1 Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01a Standard Terminology Relating to Plastic Piping Systems"
2001,ASTM,"F412-01 Standard Terminology Relating to Plastic Piping Systems"
2000,ASTM,"F412-00 Standard Terminology Relating to Plastic Piping Systems"
2002,ASTM,"F438-02e1 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2011,ASTM,"F439-11 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
2002,ASTM,"F439-02e1 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80"
1999,ASTM,"F441/F441M-99e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80"
2002,ASTM,"F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control"
2002,ASTM,"F477-02e1 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2006,ASTM,"F480-06be1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2002,ASTM,"F480-02e1 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80"
2001,ASTM,"F512-95(2001)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation"
2011,ASTM,"D494-11 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products"
2011,ASTM,"D494-11 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products (Redline)"
2010,ASTM,"D494-04(2010)e1 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products"
2000,ASTM,"D542-00 Standard Test Method for Index of Refraction of Transparent Organic Plastics"
2010,ASTM,"D570-98(2010)e1 Standard Test Method for Water Absorption of Plastics"
2000,ASTM,"F585-94(2000) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2009,ASTM,"F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2005,ASTM,"F610/F610M-00a(2005) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2000,ASTM,"F610/F610M-00a Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique"
2006,ASTM,"F628-06e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core"
1999,ASTM,"D704-99 Standard Specification for Melamine-Formaldehyde Molding Compounds"
1999,ASTM,"D705-99 Standard Specification for Urea-Formaldehyde Molding Compounds"
2005,ASTM,"D706-05 Standard Specification for Cellulose Acetate Molding and Extrusion Compounds"
1998,ASTM,"D706-98 Standard Specification for Cellulose Acetate Molding and Extrusion Compounds"
2005,ASTM,"D707-05 Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds"
1998,ASTM,"D707-98 Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds"
1997,ASTM,"F689-97 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2008,ASTM,"D731-08 Standard Test Method for Molding Index of Thermosetting Molding Powder"
2010,ASTM,"D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool"
1998,ASTM,"D746-98e1 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact"
1998,ASTM,"D785-98e1 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials"
2003,ASTM,"D787-96(2003) Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds"
1996,ASTM,"D787-96 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds"
2005,ASTM,"D788-05 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2004,ASTM,"D788-04 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2002,ASTM,"D788-02 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
1996,ASTM,"D788-96 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2007,ASTM,"D789-07e1 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)"
2006,ASTM,"D789-06a Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)"
2006,ASTM,"D789-06 Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA)"
2005,ASTM,"D789-05 Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA) <sup>1,2</sup>"
2004,ASTM,"D789-04 Standard Test Method for Determination of Relative Viscosity of Polyamide (PA)"
1998,ASTM,"D789-98 Standard Test Methods for Determination of Relative Viscosity and Moisture Content of Polyamide (PA)"
2007,ASTM,"D790-07e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2008,ASTM,"F725-03(2008)e1 Standard Practice for  Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2003,ASTM,"F725-03e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2003,ASTM,"F725-03 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
1996,ASTM,"F725-89(1996) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards"
2008,ASTM,"C581-03(2008)e1 Standard Practice for  Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2003,ASTM,"C581-03 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2007,ASTM,"F758-95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage"
2000,ASTM,"C581-00 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2002,ASTM,"C582-02 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
1995,ASTM,"C582-95 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
1999,ASTM,"F771-99e1 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems"
2011,ASTM,"D883-11 Standard Terminology Relating to Plastics"
2007,ASTM,"D883-07 Standard Terminology Relating to Plastics"
2000,ASTM,"D883-00 Standard Terminology Relating to Plastics"
2010,ASTM,"F876-10e1 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2003,ASTM,"F876-03e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01e2 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2001,ASTM,"F876-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"F877-11a Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems"
2002,ASTM,"F877-02e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2001,ASTM,"F877-01e1 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems"
2009,ASTM,"D953-09 Standard Test Method for Bearing Strength of Plastics"
2002,ASTM,"D953-02 Standard Test Method for Bearing Strength of Plastics"
1995,ASTM,"D953-95 Standard Test Method for Bearing Strength of Plastics"
2000,ASTM,"D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics"
1996,ASTM,"D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics"
2006,ASTM,"D957-95(2006)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics"
2000,ASTM,"D957-95(2000)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics"
1995,ASTM,"D957-95 Standard Practice for Determining Surface Temperature of Molds for Plastics"
2000,ASTM,"F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core"
2011,ASTM,"F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints"
1996,ASTM,"F905-96 Standard Practice for Qualification of Polyethylene Saddle Fusion Joints"
2002,ASTM,"F913-02e1 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2002,ASTM,"F913-02 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
1995,ASTM,"F913-95 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2011,ASTM,"D1003-11e1 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics"
2007,ASTM,"D1003-07e1 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics"
2011,ASTM,"F948-94(2011) Standard Test Method for  Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2001,ASTM,"F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2001,ASTM,"F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
1994,ASTM,"F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow"
2001,ASTM,"D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions"
2001,ASTM,"D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions"
1993,ASTM,"D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions"
2009,ASTM,"D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test"
2002,ASTM,"D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test"
1999,ASTM,"D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test"
2001,ASTM,"D1045-95(2001) Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics"
1995,ASTM,"D1045-95 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics"
2004,ASTM,"D1055-04 Standard Specifications for Flexible Cellular Materials-Latex Foam"
1997,ASTM,"D1055-97 Standard Specifications for Flexible Cellular Materials-Latex Foam"
2011,ASTM,"F1025-94(2011) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2000,ASTM,"F1025-94(2000) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe"
2002,ASTM,"F1041-02 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
1995,ASTM,"F1041-95 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2011,ASTM,"F1055-11 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing"
1998,ASTM,"F1055-98e1 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2011,ASTM,"F1056-04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
1997,ASTM,"F1056-97 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings"
1999,ASTM,"D1203-94(1999)e1 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods"
1994,ASTM,"D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature"
2001,ASTM,"D1238-01e1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2006,ASTM,"D1239-98(2006)e1 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals"
1998,ASTM,"D1239-98 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals"
2000,ASTM,"D1243-95(2000)e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers"
1995,ASTM,"D1243-95 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers"
2008,ASTM,"F1216-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07b Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07a Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2007,ASTM,"F1216-07 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2006,ASTM,"F1216-06 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2005,ASTM,"F1216-05 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2003,ASTM,"F1216-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
1998,ASTM,"F1216-98 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube"
2011,ASTM,"D1430-11 Standard Classification System for  Polychlorotrifluoroethylene (PCTFE) Plastics"
2010,ASTM,"D1430-10 Standard Classification System for  Polychlorotrifluoroethylene (PCTFE) Plastics"
2003,ASTM,"D1430-03 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics"
2000,ASTM,"D1430-00 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics"
2008,ASTM,"D1494-97(2008)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2001,ASTM,"D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
1998,ASTM,"D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique"
2011,ASTM,"F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1281-03e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2002,ASTM,"F1281-02e2 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2002,ASTM,"F1281-02e1 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2003,ASTM,"F1282-03e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2002,ASTM,"F1282-02e2 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2002,ASTM,"F1282-02e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe"
2007,ASTM,"D1525-07 Standard Test Method for Vicat Softening Temperature of Plastics"
2006,ASTM,"D1525-06 Standard Test Method for Vicat Softening Temperature of Plastics"
2000,ASTM,"D1525-00 Standard Test Method for Vicat Softening Temperature of Plastics"
1999,ASTM,"D1527-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80"
2002,ASTM,"F1336-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2000,ASTM,"F1336-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2005,ASTM,"D1562-05 Standard Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds"
1998,ASTM,"D1562-98 Standard Classification System for Cellulose Acetate Propionate Molding and Extrusion Compounds"
2005,ASTM,"F1365-91(2005) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
1999,ASTM,"F1365-91(1999)e1 Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals"
2008,ASTM,"D1598-02(2008) Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2002,ASTM,"D1598-02 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2011,ASTM,"D1599-99(2011) Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings"
1999,ASTM,"D1599-99e1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings"
1999,ASTM,"D1599-99 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings"
1999,ASTM,"D1601-99 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers"
2011,ASTM,"D1603-11 Standard Test Method for  Carbon Black Content in Olefin Plastics"
2001,ASTM,"F1412-01e1 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2011,ASTM,"F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air (Redline)"
1998,ASTM,"D1622-98 Standard Test Method for Apparent Density of Rigid Cellular Plastics"
1995,ASTM,"D1623-78(1995) Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics"
2004,ASTM,"D1636-99(2004)e1 Standard Specification for Allyl Molding Compounds"
2005,ASTM,"F1429-99(2005) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
1999,ASTM,"D1636-99 Standard Specification for Allyl Molding Compounds"
1999,ASTM,"F1429-99 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell"
2006,ASTM,"D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens"
2006,ASTM,"D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens"
2002,ASTM,"D1708-02a Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens"
1996,ASTM,"D1708-96 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens"
2001,ASTM,"D1709-01 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
1998,ASTM,"D1709-98 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method"
2002,ASTM,"D1710-02 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing"
1999,ASTM,"D1710-99 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing"
2011,ASTM,"F1473-11 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2003,ASTM,"D1712-03 Standard Practice for Resistance of Plastics to Sulfide Staining"
1996,ASTM,"D1712-96 Standard Practice for Resistance of Plastics to Sulfide Staining"
2001,ASTM,"F1473-01e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
2001,ASTM,"F1473-01 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
1997,ASTM,"F1473-97e1 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins"
1998,ASTM,"F1483-98 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2000,ASTM,"F1488-00e1 Standard Specification for Coextruded Composite Pipe"
2003,ASTM,"D1746-03 Standard Test Method for Transparency of Plastic Sheeting"
1997,ASTM,"D1746-97 Standard Test Method for Transparency of Plastic Sheeting"
2000,ASTM,"F1498-00e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2000,ASTM,"F1498-00 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2001,ASTM,"D1755-92(2001) Standard Specification for Poly(Vinyl Chloride) Resins"
1992,ASTM,"D1755-92 Standard Specification for Poly(Vinyl Chloride) Resins"
2010,ASTM,"F1504-10 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1997,ASTM,"F1504-97e2 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1997,ASTM,"F1504-97e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
2000,ASTM,"D1763-00 Standard Specification for Epoxy Resins"
1994,ASTM,"D1763-94 Standard Specification for Epoxy Resins"
1999,ASTM,"D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2001,ASTM,"F1533-01 Standard Specification for Deformed Polyethylene (PE) Liner"
1997,ASTM,"F1533-97 Standard Specification for Deformed Polyethylene (PE) Liner"
2006,ASTM,"D1786-01(2006)e1 Standard Specification for Toluene Diisocyanate"
2001,ASTM,"D1786-01 Standard Specification for Toluene Diisocyanate"
1996,ASTM,"D1786-96 Standard Specification for Toluene Diisocyanate"
2002,ASTM,"D1790-02 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact"
1999,ASTM,"D1790-99 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact"
1997,ASTM,"F1545-97e1 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2003,ASTM,"F1545-97(2003) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
1997,ASTM,"F1545-97 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2001,ASTM,"D1823-95(2001) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer"
1995,ASTM,"D1823-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer"
2010,ASTM,"D1824-95(2010) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates"
2011,ASTM,"F1563-01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2001,ASTM,"F1563-01 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2000,ASTM,"F1563-94(2000) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2011,ASTM,"F1588-96(2011) Standard Test Method for  Constant Tensile Load Joint Test (CTLJT)"
2002,ASTM,"F1588-96(2002) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
1996,ASTM,"F1588-96 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2011,ASTM,"D1894-11e1 Standard Test Method for  Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2011,ASTM,"D1894-11 Standard Test Method for  Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2006,ASTM,"D1894-06 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2001,ASTM,"D1894-01 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2000,ASTM,"D1894-00 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting"
2010,ASTM,"D1895-96(2010)e1 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials"
2003,ASTM,"D1895-96(2003) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials"
1996,ASTM,"D1895-96 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials"
2006,ASTM,"D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials"
2001,ASTM,"D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials"
1996,ASTM,"D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials"
2008,ASTM,"D1922-08 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2006,ASTM,"D1922-06a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2006,ASTM,"D1922-06 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2005,ASTM,"D1922-05 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2003,ASTM,"D1922-03a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2003,ASTM,"D1922-03 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2000,ASTM,"D1922-00a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method"
2011,ASTM,"D1929-11 Standard Test Method for  Determining Ignition Temperature of Plastics"
2006,ASTM,"D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method"
2002,ASTM,"D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method"
1994,ASTM,"D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method"
2001,ASTM,"D1972-97(2001) Standard Practice for Generic Marking of Plastic Products"
1997,ASTM,"D1972-97 Standard Practice for Generic Marking of Plastic Products"
2011,ASTM,"F1674-11 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
1996,ASTM,"F1674-96 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
2003,ASTM,"F1675-03 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
1996,ASTM,"F1675-96 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits"
2009,ASTM,"F1697-09 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2008,ASTM,"F1697-08e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2008,ASTM,"F1697-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  "
2007,ASTM,"F1697-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2002,ASTM,"F1697-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01a Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1697-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
1996,ASTM,"F1697-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1698-02 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1698-96 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1732-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material"
1996,ASTM,"F1733-96e1 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2002,ASTM,"F1733-96(2002) Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
1996,ASTM,"F1733-96 Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing"
2003,ASTM,"F1734-03 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
1996,ASTM,"F1734-96 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2002,ASTM,"F1735-02e1 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2008,ASTM,"F1735-02(2008)  Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2002,ASTM,"F1735-02 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
1996,ASTM,"F1735-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits"
2007,ASTM,"F1741-07 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2005,ASTM,"F1741-05 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02ae1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02a Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2002,ASTM,"F1741-02 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1741-01e1 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2001,ASTM,"F1741-01 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
1996,ASTM,"F1741-96 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits"
2003,ASTM,"F1743-96(2003) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
1996,ASTM,"F1743-96 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2007,ASTM,"D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2001,ASTM,"D2105-01 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2011,ASTM,"F1760-01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
1997,ASTM,"D2105-97 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2005,ASTM,"F1760-01(2005)e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
2001,ASTM,"F1760-01 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
1997,ASTM,"F1760-97 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content"
2010,ASTM,"D2115-10 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
2003,ASTM,"D2115-92(2003) Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
1997,ASTM,"D2115-92(1997) Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
2002,ASTM,"D2116-02 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials"
1997,ASTM,"D2116-97 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials"
1998,ASTM,"D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2004,ASTM,"D2122-98(2004) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
1998,ASTM,"D2122-98 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings"
2011,ASTM,"D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique"
1999,ASTM,"D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique"
2010,ASTM,"D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2005,ASTM,"D2143-00(2005)e1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2000,ASTM,"D2143-00 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
1994,ASTM,"D2143-94 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2003,ASTM,"D2152-95(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
1995,ASTM,"D2152-95 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion"
2010,ASTM,"F1802-04(2010) Standard Test Method for Performance Testing of Excess Flow Valves"
2004,ASTM,"F1803-04 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
1997,ASTM,"F1803-97 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter"
2010,ASTM,"F1807-10e1 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2007,ASTM,"F1807-07ae1 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"D2222-94(2004) Standard Test Method for Methanol Extract of Vinyl Chloride Resins"
1999,ASTM,"D2222-94(1999) Standard Test Method for Methanol Extract of Vinyl Chloride Resins"
1999,ASTM,"D2238-92(1999) Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm"
2002,ASTM,"F1865-02e1 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2009,ASTM,"F1865-02a(2009) Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1865-02a Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1865-02 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
2004,ASTM,"F1867-98(2004) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1867-98 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2011,ASTM,"F1871-11 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2002,ASTM,"F1871-02 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1871-98e2 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1871-98e1 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2011,ASTM,"D2287-11 Standard Specification for  Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds"
2004,ASTM,"D2290-04 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2000,ASTM,"D2290-00e1 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2000,ASTM,"D2290-00 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method"
2003,ASTM,"D2291-03 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites"
1998,ASTM,"D2291-98 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites"
2004,ASTM,"F1901-98(2004) Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
1998,ASTM,"F1901-98 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2004,ASTM,"D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications"
2008,ASTM,"D2343-08 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics"
2003,ASTM,"D2343-03 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics"
1995,ASTM,"D2343-95 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics"
2001,ASTM,"F1924-01e1 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2001,ASTM,"F1924-01 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2010,ASTM,"F1947-10 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
1998,ASTM,"F1947-98 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits"
2011,ASTM,"F1948-05(2011) Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
1999,ASTM,"F1948-99ae1 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
1999,ASTM,"F1948-99a Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2001,ASTM,"D2383-97(2001) Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
1997,ASTM,"D2383-97 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions"
1999,ASTM,"D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2000,ASTM,"F1960-00e1 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02e1 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2002,ASTM,"F1961-02 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"F1962-11 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2005,ASTM,"F1962-05e1 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2005,ASTM,"F1962-05 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
1999,ASTM,"F1962-99 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2001,ASTM,"F1970-01 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
1999,ASTM,"F1970-99 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems"
1999,ASTM,"F1973-99e2 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
1999,ASTM,"F1973-99e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems"
2001,ASTM,"F1974-01e2 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2001,ASTM,"F1974-01e1 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe"
2010,ASTM,"D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
1999,ASTM,"D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)"
2008,ASTM,"D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2003,ASTM,"D2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
1997,ASTM,"D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2010,ASTM,"D2463-10a Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2010,ASTM,"D2463-10 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2005,ASTM,"D2463-95(2005) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2011,ASTM,"F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2001,ASTM,"D2463-95(2001) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
1995,ASTM,"D2463-95 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2011,ASTM,"F1987-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems"
1999,ASTM,"D2464-99e1 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2001,ASTM,"F1987-01 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2000,ASTM,"F1987-00a Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems"
2004,ASTM,"D2467-04e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80"
2010,ASTM,"F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2000,ASTM,"F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2000,ASTM,"F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens"
2011,ASTM,"F2019-11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in  Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting  Resin Pipe (CIPP)"
2003,ASTM,"F2019-03 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2000,ASTM,"F2019-00 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2011,ASTM,"F2021-11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems"
2011,ASTM,"D2513-11c Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2000,ASTM,"F2021-00 Standard Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems"
2011,ASTM,"D2513-11e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"D2513-11b Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"F2023-09 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2008,ASTM,"F2023-08 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2005,ASTM,"F2023-05 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2004,ASTM,"F2023-04 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2003,ASTM,"F2023-03e1 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2003,ASTM,"F2023-03 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2000,ASTM,"F2023-00 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water"
2007,ASTM,"D2513-07be1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2001,ASTM,"D2513-01ae1 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2000,ASTM,"D2517-00e1 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2010,ASTM,"D2538-02(2010) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
1995,ASTM,"D2538-95 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
2001,ASTM,"D2561-95(2001) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
1995,ASTM,"D2561-95 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers"
2002,ASTM,"D2563-94(2002)e1 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
1994,ASTM,"D2563-94 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts"
2009,ASTM,"D2564-04(2009)e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2004,ASTM,"D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems"
2008,ASTM,"D2578-08 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2004,ASTM,"D2578-04a Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2004,ASTM,"D2578-04 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
1999,ASTM,"D2578-99a Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films"
2001,ASTM,"D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor"
2011,ASTM,"D2584-11 Standard Test Method for  Ignition Loss of Cured Reinforced Resins"
2002,ASTM,"D2584-02 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
1994,ASTM,"D2584-94 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2003,ASTM,"E1788-96(2003) Standard Test Method for Acidity in Acrylonitrile"
1996,ASTM,"E1788-96 Standard Test Method for Acidity in Acrylonitrile"
2004,ASTM,"F2098-04e1 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings"
2009,ASTM,"D2647-09 Standard Specification for Crosslinkable Ethylene Plastics"
2005,ASTM,"D2647-05a Standard Specification for Crosslinkable Ethylene Plastics"
2005,ASTM,"D2647-05 Standard Specification for Crosslinkable Ethylene Plastics"
2000,ASTM,"D2647-94(2000)e1 Standard Specification for Crosslinkable Ethylene Plastics"
1994,ASTM,"D2647-94 Standard Specification for Crosslinkable Ethylene Plastics"
2011,ASTM,"D2659-11 Standard Test Method for  Column Crush Properties of Blown Thermoplastic Containers"
2001,ASTM,"D2659-95(2001) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
1995,ASTM,"D2659-95 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
1997,ASTM,"D2661-97ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2665-08 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04ae2 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2665-04ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2002,ASTM,"D2665-02ae1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2004,ASTM,"D2673-04 Standard Specification for Oriented Polypropylene Film"
1999,ASTM,"D2673-99 Standard Specification for Oriented Polypropylene Film"
2001,ASTM,"F2135-01 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2005,ASTM,"F2136-05 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2005,ASTM,"D2684-95(2005) Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2001,ASTM,"F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2001,ASTM,"D2684-95(2001) Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2001,ASTM,"F2136-01 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
1995,ASTM,"D2684-95 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products"
2001,ASTM,"F2138-01e1 Standard Specification for Excess Flow Valves for Natural Gas Service"
2001,ASTM,"F2138-01 Standard Specification for Excess Flow Valves for Natural Gas Service"
2007,ASTM,"F2145-01(2007) Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing"
2001,ASTM,"F2145-01 Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing"
2001,ASTM,"F2158-01 Standard Specification for Residential Central-Vacuum Tube and Fittings"
2003,ASTM,"F2159-03e1 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2008,ASTM,"F2160-08 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2005,ASTM,"F2160-05 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2001,ASTM,"F2160-01 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)"
2010,ASTM,"F2164-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2002,ASTM,"F2164-02 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure"
2002,ASTM,"F2165-02 Standard Specification for Flexible Pre-Insulated Piping"
2002,ASTM,"E1863-97(2002) Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
1997,ASTM,"E1863-97 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
2002,ASTM,"F2176-02 Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct"
2011,ASTM,"F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2002,ASTM,"F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock"
2002,ASTM,"F2207-02 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe"
2003,ASTM,"D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
1996,ASTM,"D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting"
2003,ASTM,"D2734-94(2003) Standard Test Methods for Void Content of Reinforced Plastics"
1994,ASTM,"D2734-94 Standard Test Methods for Void Content of Reinforced Plastics"
2011,ASTM,"D2765-11 Standard Test Methods for  Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2002,ASTM,"F2231-02e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2002,ASTM,"F2231-02 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes"
2001,ASTM,"D2765-01 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
1995,ASTM,"D2765-95 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics"
2004,ASTM,"D2774-04e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping"
2007,ASTM,"F2263-07e1 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2007,ASTM,"F2263-07 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2003,ASTM,"F2263-03 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2004,ASTM,"D2837-04e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products"
2001,ASTM,"D2837-01ae1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials"
2008,ASTM,"D2838-08 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2007,ASTM,"D2838-07 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2002,ASTM,"D2838-02 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
1995,ASTM,"D2838-95 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting"
2011,ASTM,"F2306/F2306M-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2005,ASTM,"D2839-05 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2002,ASTM,"D2839-02 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene"
2005,ASTM,"F2306/F2306M-05 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2004,ASTM,"D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics"
1999,ASTM,"D2846/D2846M-99e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2002,ASTM,"D2852-95(2002) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
1995,ASTM,"D2852-95 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2001,ASTM,"D2857-95(2001) Standard Practice for Dilute Solution Viscosity of Polymers"
1995,ASTM,"D2857-95 Standard Practice for Dilute Solution Viscosity of Polymers"
2004,ASTM,"F2331-04 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials"
2009,ASTM,"D2863-09 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2008,ASTM,"D2863-08 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2006,ASTM,"D2863-06a Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2006,ASTM,"D2863-06 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2000,ASTM,"D2863-00 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2007,ASTM,"F2389-07e1 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems"
2010,ASTM,"D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2001,ASTM,"D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles"
1994,ASTM,"D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles"
2006,ASTM,"D2923-06 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2001,ASTM,"D2923-01 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
1995,ASTM,"D2923-95 Standard Test Method for Rigidity of Polyolefin Film and Sheeting"
2001,ASTM,"D2924-01 Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D2924-99 Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2007,ASTM,"D2925-01(2007)e1 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2001,ASTM,"D2925-01 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2000,ASTM,"D2925-95(2000)e1 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2009,ASTM,"F2418-09 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2005,ASTM,"F2418-05 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2004,ASTM,"F2418-04 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2005,ASTM,"F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness"
2001,ASTM,"D2949-01ae1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2008,ASTM,"D2949-01a(2008)e1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
2005,ASTM,"F2434-05 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing"
2005,ASTM,"F2435-05 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2006,ASTM,"F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines"
2001,ASTM,"D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
1995,ASTM,"D2990-95 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics"
2001,ASTM,"D2992-01 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
1996,ASTM,"D2992-96e1 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2007,ASTM,"D2996-01(2007)e1 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2006,ASTM,"F2510/F2510M-06 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes"
2007,ASTM,"D2997-01(2007)e1 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2004,ASTM,"D3012-04 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven"
2000,ASTM,"D3012-00 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven"
2004,ASTM,"D3013-99(2004)e1 Standard Specification for Epoxy Molding Compounds"
1999,ASTM,"D3013-99 Standard Specification for Epoxy Molding Compounds"
2011,ASTM,"D3014-11 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2004,ASTM,"D3014-04 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
1999,ASTM,"D3014-99 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position"
2011,ASTM,"F2536-06b(2011) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2006,ASTM,"F2536-06 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2011,ASTM,"D3030-11 Standard Test Method for  Volatile Matter (Including Water) of Vinyl Chloride Resins"
2000,ASTM,"D3030-95(2000) Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
1995,ASTM,"D3030-95 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2006,ASTM,"F2561-06 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2007,ASTM,"F2562/F2562M-07 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage"
2006,ASTM,"F2599-06 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner"
2006,ASTM,"F2600-06 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing"
2011,ASTM,"F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe"
2007,ASTM,"F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe"
2011,ASTM,"F2620-11 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2009,ASTM,"F2620-09e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2009,ASTM,"F2620-09 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2006,ASTM,"F2620-06 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2010,ASTM,"F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method"
2011,ASTM,"F2648/F2648M-11 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2010,ASTM,"F2648/F2648M-10 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2007,ASTM,"F2648/F2648M-07 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2008,ASTM,"F2649-08 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks"
2002,ASTM,"D3122-95(2002) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
1995,ASTM,"D3122-95 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2004,ASTM,"D3123-98(2004) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds"
1999,ASTM,"D3123-98(1999)e1 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds"
2011,ASTM,"D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
1998,ASTM,"D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2008,ASTM,"F2720/F2720M-08 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe"
2008,ASTM,"F2735-08a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2008,ASTM,"F2735-08 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2011,ASTM,"F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units"
2011,ASTM,"F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units (Redline)"
2010,ASTM,"F2737-10a Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units"
2011,ASTM,"D3139-98(2011) Standard Specification for  Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals"
2011,ASTM,"F2762-11 Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2011,ASTM,"F2763-11 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2011,ASTM,"F2764-11 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2010,ASTM,"F2764-10e1 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2010,ASTM,"F2764-10a Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2010,ASTM,"F2764-10 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2009,ASTM,"F2769-09 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems"
2010,ASTM,"D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2004,ASTM,"D3159-04 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
1998,ASTM,"D3159-98 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials"
2010,ASTM,"F2785-10a Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"F2785-10 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"F2785-09e1 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2009,ASTM,"F2785-09 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"F2787-11 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers"
2011,ASTM,"F2788-11 Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe"
2011,ASTM,"F2805-11 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections"
2010,ASTM,"F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)"
2010,ASTM,"F2829-10 Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems"
2011,ASTM,"F2830-11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer"
2011,ASTM,"F2831-11 Standard Practice for  Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems"
2010,ASTM,"F2854-10 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing"
2011,ASTM,"F2855-11 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing"
2011,ASTM,"F2881-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2011,ASTM,"F2896-11 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids"
2011,ASTM,"F2897-11a Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2011,ASTM,"F2897-11 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2011,ASTM,"F2561-11 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2011,ASTM,"F2599-11 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner"
2003,ASTM,"D3212-96a(2003)e1 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals"
2011,ASTM,"F2880-11a Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <span class=""unicode"">¾ in. to 65 in.</span>"
2011,ASTM,"F2620-11e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2011,ASTM,"F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type"
2011,ASTM,"F2263-07(2011) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2011,ASTM,"F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials"
2011,ASTM,"F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials (Redline)"
2011,ASTM,"D3262-11 Standard Specification for  &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2006,ASTM,"D3275-06 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2005,ASTM,"D3275-05 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2000,ASTM,"D3275-00 Standard Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
1997,ASTM,"D3275-97 Standard Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2011,ASTM,"D3291-11 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
1997,ASTM,"D3291-97 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression"
2003,ASTM,"D3294-03 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
1997,ASTM,"D3294-97 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes"
2011,ASTM,"D3295-06(2011) Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2001,ASTM,"D3295-01 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
1997,ASTM,"D3295-97 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2003,ASTM,"D3296-03 Standard Specification for FEP-Fluorocarbon Tube"
1998,ASTM,"D3296-98 Standard Specification for FEP-Fluorocarbon Tube"
2008,ASTM,"D3307-08 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2006,ASTM,"D3307-06 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2004,ASTM,"D3307-04 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2001,ASTM,"D3307-01 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2000,ASTM,"D3307-00 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials"
2001,ASTM,"D3308-01 Standard Specification for PTFE Resin Skived Tape"
1997,ASTM,"D3308-97 Standard Specification for PTFE Resin Skived Tape"
2002,ASTM,"D3311-02e1 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2011,ASTM,"D3354-11 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2004,ASTM,"D3354-04 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
1996,ASTM,"D3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method"
2011,ASTM,"D3364-99(2011) Standard Test Method for  Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
1999,ASTM,"D3364-99 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications"
2004,ASTM,"D3367-98(2004) Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
1998,ASTM,"D3367-98 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force"
2004,ASTM,"D3368-04 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
1999,ASTM,"D3368-99 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film"
2003,ASTM,"D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry"
1999,ASTM,"D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry"
2000,ASTM,"D3419-00 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
1993,ASTM,"D3419-93 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2008,ASTM,"D3420-08a Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2002,ASTM,"D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film"
2007,ASTM,"D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography"
2000,ASTM,"D3465-00 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography"
2000,ASTM,"D3489-96(2000) Standard Test Methods for Rubber--Microcellular Urethane"
1996,ASTM,"D3489-96 Standard Test Methods for Rubber--Microcellular Urethane"
2011,ASTM,"D3517-11 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2002,ASTM,"D3567-97(2002) Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
1997,ASTM,"D3567-97 Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2001,ASTM,"D3574-01e1 Standard Test Methods for Flexible Cellular Materials&#8212;Slab, Bonded, and Molded Urethane Foams"
2008,ASTM,"D3575-08 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2000,ASTM,"D3575-00e1 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers"
2004,ASTM,"D3576-04 Standard Test Method for Cell Size of Rigid Cellular Plastics"
1998,ASTM,"D3576-98 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2011,ASTM,"D3591-97(2011) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
1997,ASTM,"D3591-97 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds"
2000,ASTM,"D3594-93(2000) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
1993,ASTM,"D3594-93 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2002,ASTM,"D3595-02 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
1997,ASTM,"D3595-97 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film"
2001,ASTM,"D3596-92(2001) Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2010,ASTM,"D3641-10a Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2002,ASTM,"D3641-02 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
1997,ASTM,"D3641-97 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2003,ASTM,"D3647-03 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
1995,ASTM,"D3647-84(1995) Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition"
2011,ASTM,"D3675-11 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2009,ASTM,"D3675-09 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2008,ASTM,"D3675-08 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2005,ASTM,"D3675-05 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source"
2001,ASTM,"D3675-01 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source"
1998,ASTM,"D3675-98 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source"
2008,ASTM,"D3678-97(2008)e1 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2011,ASTM,"D3679-11 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03e2 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03e1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3681-01e1 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2001,ASTM,"D3681-01 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
1996,ASTM,"D3681-96 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2003,ASTM,"D3748-03 Standard Practice for Evaluating High-Density Rigid Cellular Plastics"
1998,ASTM,"D3748-98 Standard Practice for Evaluating High-Density Rigid Cellular Thermoplastics"
2002,ASTM,"D3749-95(2002) Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
2005,ASTM,"D3753-05e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2011,ASTM,"D3754-11 Standard Specification for  &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2010,ASTM,"D3763-10e1 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2008,ASTM,"D3763-08 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2006,ASTM,"D3763-06 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2002,ASTM,"D3763-02 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2000,ASTM,"D3763-00 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors"
2000,ASTM,"D3768-96(2000) Standard Test Method for Microcellular Urethanes--Flexural Recovery"
1996,ASTM,"D3768-96 Standard Test Method for Microcellular Urethanes--Flexural Recovery"
2005,ASTM,"D3769-05 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2000,ASTM,"D3769-96(2000) Standard Test Method for Microcellular Urethanes--High Temperature Sag"
1996,ASTM,"D3769-96 Standard Test Method for Microcellular Urethanes--High Temperature Sag"
2000,ASTM,"D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer"
2006,ASTM,"D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2000,ASTM,"D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
1996,ASTM,"D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position"
2002,ASTM,"D3826-98(2002) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
2002,ASTM,"D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
1996,ASTM,"D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer"
2002,ASTM,"D3839-02e1 Standard Guide for Underground Installation of ""Fiberglass"" (Glass-FiberReinforced Thermosetting-Resin) Pipe"
2008,ASTM,"D3841-97(2008)e1 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2002,ASTM,"D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
1994,ASTM,"D3846-94 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
2003,ASTM,"D3851-97(2003)e1 Standard Specification for Urethane Microcellular Shoe Soling Materials"
1997,ASTM,"D3851-97 Standard Specification for Urethane Microcellular Shoe Soling Materials"
2003,ASTM,"D3892-93(2003) Standard Practice for Packaging/Packing of Plastics"
1998,ASTM,"D3892-93(1998) Standard Practice for Packaging/Packing of Plastics"
2006,ASTM,"D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2004,ASTM,"D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2003,ASTM,"D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2002,ASTM,"D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
1998,ASTM,"D3895-98 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry"
2002,ASTM,"D3914-02 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
1996,ASTM,"D3914-96 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod"
1999,ASTM,"D3915-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2004,ASTM,"D3915-99a(2004) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications"
2008,ASTM,"D3916-08 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
2002,ASTM,"D3916-02 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
1994,ASTM,"D3916-94 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod"
2011,ASTM,"D3917-11 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2002,ASTM,"D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
1996,ASTM,"D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2011,ASTM,"D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2011,ASTM,"D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products (Redline)"
1996,ASTM,"D3918-96 Standard Terminology Relating to Reinforced Plastic Pultruded Products"
2002,ASTM,"D3935-02 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2001,ASTM,"D3935-94(2001) Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
1994,ASTM,"D3935-94 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2011,ASTM,"D3965-11 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings"
2009,ASTM,"D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2008,ASTM,"D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2003,ASTM,"D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
1995,ASTM,"D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications"
2003,ASTM,"D3982-03 Standard Specification for Contact Molded ""Fiberglass"" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods"
1998,ASTM,"D3982-98 Standard Specification for Contact Molded ""Fiberglass"" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods"
2011,ASTM,"D4000-11  Standard Classification System for  Specifying Plastic Materials"
2010,ASTM,"D4000-10 Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09b Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09a Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09 Standard Classification System for  Specifying Plastic Materials"
2008,ASTM,"D4000-08 Standard Classification System for  Specifying Plastic Materials"
2007,ASTM,"D4000-07 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04e1 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04 Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03a Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01ae1 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01 Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00a Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00 Standard Classification System for Specifying Plastic Materials"
1999,ASTM,"D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering"
2011,ASTM,"D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2000,ASTM,"D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2000,ASTM,"D4024-00 Standard Specification for Machine Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2011,ASTM,"D4067-11 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
2010,ASTM,"D4067-10 Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods"
1996,ASTM,"D4067-96 Standard Specification for Reinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding and Extrusion Materials"
2001,ASTM,"D4092-01 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
1996,ASTM,"D4092-96 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
2010,ASTM,"D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2005,ASTM,"D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2001,ASTM,"D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
1995,ASTM,"D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials"
2000,ASTM,"D4094-00 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers"
1995,ASTM,"D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2005,ASTM,"D4161-01(2005) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2001,ASTM,"D4161-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2002,ASTM,"D4167-97(2002) Standard Specification for Fiber-Reinforced Plastic Fans and Blowers"
1997,ASTM,"D4167-97 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers"
2000,ASTM,"D4203-00 Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2000,ASTM,"D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study"
2000,ASTM,"D4216-00e1 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds"
2001,ASTM,"D4218-96(2001) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
1996,ASTM,"D4218-96 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique"
2011,ASTM,"D4226-11 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2008,ASTM,"D4272-08 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2011,ASTM,"D4273-11 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols"
1999,ASTM,"D4273-99 Standard Test Methods for Polyurethane Raw Materials  Determination of Primary Hydroxyl Content of Polyether Polyols"
2011,ASTM,"D4274-11 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols"
1999,ASTM,"D4274-99 Standard Test Methods for Testing Polyurethane Raw Materials  Determination of Hydroxyl Numbers of Polyols"
2002,ASTM,"D4275-02 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
2004,ASTM,"D4321-04 Standard Test Method for Package Yield of Plastic Film"
1999,ASTM,"D4321-99 Standard Test Method for Package Yield of Plastic Film"
1999,ASTM,"D4329-99 Standard Practice for Fluorescent UV Exposure of Plastics"
2010,ASTM,"D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
1996,ASTM,"D4349-96 Standard Classification System for Polyphenylene Ether (PPE) Materials"
2000,ASTM,"D4350-00 Standard Test Method for Corrosivity Index of Plastics and Fillers"
2002,ASTM,"D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
1994,ASTM,"D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2008,ASTM,"D4385-08 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2002,ASTM,"D4385-02 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
1995,ASTM,"D4385-95 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
1999,ASTM,"D4396-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications"
2002,ASTM,"D4398-02 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
1995,ASTM,"D4398-95 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
2007,ASTM,"D4440-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2001,ASTM,"D4440-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
1995,ASTM,"D4440-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2004,ASTM,"D4441-04 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
1998,ASTM,"D4441-98 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2002,ASTM,"D4443-95(2002) Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
1999,ASTM,"D4459-99 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2003,ASTM,"D4473-03 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2001,ASTM,"D4473-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
1995,ASTM,"D4473-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2002,ASTM,"D4475-02 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
1996,ASTM,"D4475-96 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
2003,ASTM,"D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
1997,ASTM,"D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2000,ASTM,"D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2006,ASTM,"D4508-06 Standard Test Method for Chip Impact Strength of Plastics"
2005,ASTM,"D4508-05 Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04a Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04 Standard Test Method for Chip Impact Strength of Plastics"
1998,ASTM,"D4508-98 Standard Test Method for Chip Impact Strength of Plastics"
2001,ASTM,"D4526-96(2001)e1 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
1996,ASTM,"D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2011,ASTM,"D4549-11 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2000,ASTM,"D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2008,ASTM,"D4551-96(2008)e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
2001,ASTM,"D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1997,ASTM,"D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1996,ASTM,"D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2011,ASTM,"D4634-11a Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2011,ASTM,"D4634-11  Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
1999,ASTM,"D4634-99 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2008,ASTM,"D4635-08 Standard Specification for  Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2001,ASTM,"D4635-01 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
1995,ASTM,"D4635-95 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications"
2003,ASTM,"D4659-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
1998,ASTM,"D4659-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Specific Gravity of Isocyanates"
2006,ASTM,"D4660-00(2006)e1 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2000,ASTM,"D4660-00 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2003,ASTM,"D4661-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
1998,ASTM,"D4661-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Total Chlorine in Isocyanates"
2011,ASTM,"D4662-08(2011)e1  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2003,ASTM,"D4662-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
1998,ASTM,"D4662-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Acid and Alkalinity Numbers of Polyols"
2004,ASTM,"D4663-98(2004) Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
1998,ASTM,"D4663-98 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2002,ASTM,"D4669-98(2002)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
1998,ASTM,"D4669-98 Standard Test Method for Polyurethane Raw Materials  Determination of Specific Gravity of Polyols"
2002,ASTM,"D4670-97(2002) Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
1997,ASTM,"D4670-97 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2010,ASTM,"D4671-05(2010)e1 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
1999,ASTM,"D4671-99 Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols"
2006,ASTM,"D4672-00(2006)e1 Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols"
2000,ASTM,"D4672-00 Standard Test Methods for Polyurethane Raw Materials Determination of Water Content of Polyols"
2010,ASTM,"D4674-02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2002,ASTM,"D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
1997,ASTM,"D4674-89(1997) Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
2010,ASTM,"D4703-10a Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2007,ASTM,"D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2003,ASTM,"D4703-03 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2002,ASTM,"D4703-02 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2000,ASTM,"D4703-00 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
1993,ASTM,"D4703-93 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets"
2011,ASTM,"D4745-11 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2006,ASTM,"D4745-06 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2001,ASTM,"D4745-01 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1997,ASTM,"D4745-97 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1998,ASTM,"D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2007,ASTM,"D4801-07 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2006,ASTM,"D4801-06 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2005,ASTM,"D4801-05 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2001,ASTM,"D4801-95(2001)e1 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
1995,ASTM,"D4801-95 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2010,ASTM,"D4803-10 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
2002,ASTM,"D4803-97(2002)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
1997,ASTM,"D4803-97 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
2003,ASTM,"D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
1998,ASTM,"D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2005,ASTM,"D4812-05 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics"
1999,ASTM,"D4812-99 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics"
1996,ASTM,"D4819-96 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics"
2011,ASTM,"D4875-11 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
1999,ASTM,"D4875-99 Standard Test Methods of Polyurethane Raw Materials  Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols"
2004,ASTM,"D4877-04 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
1998,ASTM,"D4877-98 Standard Test Method for Polyurethane Raw Materials  Determination of APHA Color in Isocyanates"
2003,ASTM,"D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
1998,ASTM,"D4878-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Polyols"
2003,ASTM,"D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
1999,ASTM,"D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2011,ASTM,"D4889-04(2011) Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
1998,ASTM,"D4889-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Crude or Modified Isocyanates"
2003,ASTM,"D4890-98(2003) Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
1998,ASTM,"D4890-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Gardner and APHA Color of Polyols"
2004,ASTM,"D4894-04 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
1998,ASTM,"D4894-98a Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials"
2004,ASTM,"D4895-04 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
1998,ASTM,"D4895-98 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2008,ASTM,"D4968-08 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2006,ASTM,"D4968-06 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4968-02 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4969-02 Standard Specification for Polytetrafluoroethylene&#8212;(PTFE) Coated Glass Fabric"
1997,ASTM,"D4969-97 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2002,ASTM,"D4976-02e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2003,ASTM,"D4986-03 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
1998,ASTM,"D4986-98 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2009,ASTM,"D5017-96(2009)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2003,ASTM,"D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
1996,ASTM,"D5017-96 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2001,ASTM,"D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties:  In Flexure (Three-Point Bending)"
1999,ASTM,"D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties:  In Flexure (Three-Point Bending)"
2001,ASTM,"D5024-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression"
1999,ASTM,"D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2001,ASTM,"D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
1995,ASTM,"D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2003,ASTM,"D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2003,ASTM,"D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
1996,ASTM,"D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2007,ASTM,"D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
1999,ASTM,"D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
2005,ASTM,"D5047-05 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5047-95(2003) Standard Specification for Polyethylene Terephthalate Film and Sheeting"
1995,ASTM,"D5047-95 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1997,ASTM,"D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1999,ASTM,"D5071-99 Standard Practice for Exposure of Photodegradable Plastics in a  Xenon Arc Apparatus"
2008,ASTM,"D5083-08 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2002,ASTM,"D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
1996,ASTM,"D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2003,ASTM,"D5117-03 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
1996,ASTM,"D5117-96 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2011,ASTM,"D5132-11 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2003,ASTM,"D5132-03 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2002,ASTM,"D5132-02 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
1994,ASTM,"D5132-93(1994)e1 Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles"
2011,ASTM,"D5138-11 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
1999,ASTM,"D5138-99a Standard Specification for Liquid Crystal Polymers"
2007,ASTM,"D5155-07 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2001,ASTM,"D5155-01 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
1996,ASTM,"D5155-96 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2002,ASTM,"D5203-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
1998,ASTM,"D5203-98 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
2011,ASTM,"D5204-11 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2003,ASTM,"D5204-03 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2001,ASTM,"D5204-01 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
1999,ASTM,"D5204-99 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2010,ASTM,"D5205-10 Standard Classification System for Polyetherimide (PEI) Materials"
1996,ASTM,"D5205-96 Standard Classification System for Polyetherimide (PEI) Materials"
2003,ASTM,"D5207-03 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials"
1998,ASTM,"D5207-98 Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials"
2001,ASTM,"D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2000,ASTM,"D5210-92(2000) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
1992,ASTM,"D5210-92 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
2000,ASTM,"D5224-00 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2003,ASTM,"D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
1998,ASTM,"D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
2010,ASTM,"D5226-98(2010)e1 Standard Practice for Dissolving Polymer Materials"
2003,ASTM,"D5226-98(2003) Standard Practice for Dissolving Polymer Materials"
1998,ASTM,"D5226-98 Standard Practice for Dissolving Polymer Materials"
2008,ASTM,"D5227-01(2008)e1 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
2001,ASTM,"D5227-01 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
1995,ASTM,"D5227-95 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
2010,ASTM,"D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
1997,ASTM,"D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
1999,ASTM,"D5272-92(1999) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics"
2001,ASTM,"D5279-01 Standard Test Method for Plastics:  Dynamic Mechanical Properties:  In Torsion"
1999,ASTM,"D5279-99 Standard Test Method for Plastics:  Dynamic Mechanical Properties:  In Torsion"
2011,ASTM,"D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
1997,ASTM,"D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
2008,ASTM,"D5319-97(2008)e1 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2001,ASTM,"D5319-97(2001) Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
1997,ASTM,"D5319-97 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2003,ASTM,"D5336-03 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2000,ASTM,"D5336-00 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2011,ASTM,"D5338-11 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions. Incorporating Thermophilic Temperatures"
1998,ASTM,"D5338-98e1 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions"
2008,ASTM,"D5364-08e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2008,ASTM,"D5364-08 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
1993,ASTM,"D5364-93e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2002,ASTM,"D5364-93(2002) Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2001,ASTM,"D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D5418-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
1999,ASTM,"D5418-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
2003,ASTM,"D5419-95(2003) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
1995,ASTM,"D5419-95 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
2003,ASTM,"D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2003,ASTM,"D5436-03 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
1999,ASTM,"D5436-99 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
1998,ASTM,"D5491-98 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2010,ASTM,"D5492-10 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2003,ASTM,"D5492-98(2003)e1 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2003,ASTM,"D5492-98(2003) Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
1998,ASTM,"D5492-98 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2008,ASTM,"D5507-99(2008)e1 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
1999,ASTM,"D5507-99 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2009,ASTM,"D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
2001,ASTM,"D5508-94a(2001)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
1994,ASTM,"D5508-94a Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
2011,ASTM,"D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2010,ASTM,"D5523-10 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
1999,ASTM,"D5523-94(1999)e1 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2011,ASTM,"D5526-94(2011)e1 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2003,ASTM,"D5575-99(2003) Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
1999,ASTM,"D5575-99 Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
2000,ASTM,"D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)"
2010,ASTM,"D5577-94(2010)e1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
2003,ASTM,"D5577-94(2003) Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
1994,ASTM,"D5577-94 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
2002,ASTM,"D5592-94(2002)e1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
1994,ASTM,"D5592-94 Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
1998,ASTM,"D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2007,ASTM,"D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2006,ASTM,"D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2001,ASTM,"D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
1996,ASTM,"D5628-96 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2011,ASTM,"D5629-11 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2001,ASTM,"D5630-01 Standard Test Method for Ash Content in Thermoplastics"
1994,ASTM,"D5630-94 Standard Test Method for Ash Content in Thermoplastics"
2003,ASTM,"D5672-03 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
1995,ASTM,"D5672-95 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
2010,ASTM,"D5675-04(2010) Standard Specification for Fluoropolymer Micropowders"
1999,ASTM,"D5675-99a Standard Specification for Fluoropolymer Micropowders"
2010,ASTM,"D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2000,ASTM,"D5677-00 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2011,ASTM,"D5740-11 Standard Guide for  Writing Material Standards in the Classification D4000 Format"
2003,ASTM,"D5740-03 Standard Guide for Writing Material Standards in the Classification D4000 Format"
1997,ASTM,"D5740-97 Standard Guide for Writing Material Standards in the Classification D4000 Format"
2001,ASTM,"D5748-95(2001) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
1995,ASTM,"D5748-95 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2004,ASTM,"D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
1995,ASTM,"D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe"
2010,ASTM,"D5814-10 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
1995,ASTM,"D5814-95 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
2010,ASTM,"D5857-10 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2008,ASTM,"D5857-08 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2007,ASTM,"D5857-07 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2005,ASTM,"D5857-05a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2005,ASTM,"D5857-05 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2004,ASTM,"D5857-04 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03b Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02e1 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2001,ASTM,"D5857-01 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2000,ASTM,"D5857-00b Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2011,ASTM,"D5870-11 Standard Practice for Calculating Property Retention Index of Plastics"
1995,ASTM,"D5870-95 Standard Practice for Calculating Property Retention Index of Plastics"
2003,ASTM,"D5927-03 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2000,ASTM,"D5927-00 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
1999,ASTM,"D5927-99a Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2001,ASTM,"D5930-01 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
1997,ASTM,"D5930-97 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
2004,ASTM,"D5946-04 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2001,ASTM,"D5946-01 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
1999,ASTM,"D5946-99 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2003,ASTM,"D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2002,ASTM,"D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
1996,ASTM,"D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2005,ASTM,"D5948-05e1 Standard Specification for Molding Compounds, Thermosetting"
2005,ASTM,"D5948-05 Standard Specification for Molding Compounds, Thermosetting"
2002,ASTM,"D5948-96(2002)e1 Standard Specification for Molding Compounds, Thermosetting"
1996,ASTM,"D5988-96 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting"
2011,ASTM,"D5989-11 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA)"
1998,ASTM,"D5989-98 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2002,ASTM,"D5991-96(2002) Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2003,ASTM,"D5998-03 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
1996,ASTM,"D5998-96 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
2001,ASTM,"D6040-01 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
1996,ASTM,"D6040-96 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2004,ASTM,"D6042-04 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2002,ASTM,"D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials"
1996,ASTM,"D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials"
2010,ASTM,"D6070-02(2010) Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
1998,ASTM,"D6070-98 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2003,ASTM,"D6099-03 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
1997,ASTM,"D6099-97 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
2011,ASTM,"D6100-11 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)"
2003,ASTM,"D6100-03 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
1997,ASTM,"D6100-97 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
1997,ASTM,"D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber"
2004,ASTM,"D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
1997,ASTM,"D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2010,ASTM,"D6117-10 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
1997,ASTM,"D6117-97 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
2003,ASTM,"D6150-97(2003) Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
1997,ASTM,"D6150-97 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
2005,ASTM,"D6226-05 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
1998,ASTM,"D6226-98e1 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2010,ASTM,"D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry"
1998,ASTM,"D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry"
1998,ASTM,"D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2003,ASTM,"D6261-98(2003) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
1998,ASTM,"D6261-98 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
2011,ASTM,"D6263-11 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2003,ASTM,"D6265-98(2003) Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
1998,ASTM,"D6265-98 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
2008,ASTM,"D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2002,ASTM,"D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2000,ASTM,"D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2005,ASTM,"D6287-05 Standard Practice for Cutting Film and Sheeting Test Specimens"
1998,ASTM,"D6287-98 Standard Practice for Cutting Film and Sheeting Test Specimens"
2003,ASTM,"D6288-98(2003) Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
1998,ASTM,"D6288-98 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2003,ASTM,"D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
1998,ASTM,"D6289-98 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
2005,ASTM,"D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets"
1998,ASTM,"D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets"
2009,ASTM,"D6338-09 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods"
2003,ASTM,"D6338-03 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)"
1998,ASTM,"D6338-98 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)"
2011,ASTM,"D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2011,ASTM,"D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) (Redline)"
2004,ASTM,"D6339-04 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
1998,ASTM,"D6339-98 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
1998,ASTM,"D6340-98 Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment"
2010,ASTM,"D6341-10 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&#176;F (-34.4 and 60&#176;C)"
1998,ASTM,"D6341-98 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&#176;F (-34.4 and 60&#176;C)"
2003,ASTM,"D6342-98(2003) Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
1998,ASTM,"D6342-98 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
1999,ASTM,"D6358-99 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods"
1999,ASTM,"D6360-99 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2009,ASTM,"D6394-09  Standard Specification for Sulfone Plastics (SP)"
2008,ASTM,"D6394-08  Standard Specification for Sulfone Plastics (SP)"
2007,ASTM,"D6394-07  Standard Specification for Sulfone Plastics (SP)"
2005,ASTM,"D6394-05 Standard Specification for Sulfone Plastics (SP)"
2003,ASTM,"D6394-03 Standard Specification for Sulfone Plastics (SP)"
2002,ASTM,"D6394-02 Standard Specification for Sulfone Plastics (SP)"
2001,ASTM,"D6394-01 Standard Specification for Sulfone Plastics (SP)"
1999,ASTM,"D6394-99 Standard Specification for Sulfone Plastics (SP)"
2011,ASTM,"D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
2011,ASTM,"D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics (Redline)"
2005,ASTM,"D6395-05 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
1999,ASTM,"D6395-99 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
1999,ASTM,"D6400-99e1 Standard Specification for Compostable Plastics"
2002,ASTM,"D6436-02 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
1999,ASTM,"D6436-99 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2010,ASTM,"D6437-05(2010)e1 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
1999,ASTM,"D6437-99 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
2010,ASTM,"D6456-10 Standard Specification for Finished Parts Made from Polyimide Resin"
1999,ASTM,"D6456-99 Standard Specification for Finished Parts Made from Polyimide Resin"
2004,ASTM,"D6457-04 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
1999,ASTM,"D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2000,ASTM,"D6576-00 Standard Specification for Flexible Cellular Rubber Chemically Blown"
2011,ASTM,"D6585-11 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2001,ASTM,"D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2001,ASTM,"D6691-01 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium"
2001,ASTM,"D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes"
2001,ASTM,"D6713-01 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)"
2010,ASTM,"D6777-02(2010)e1 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2005,ASTM,"D6778-05 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2003,ASTM,"D6778-03 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2002,ASTM,"D6778-02 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2011,ASTM,"D6779-11 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2008,ASTM,"D6779-08a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2008,ASTM,"D6779-08 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2007,ASTM,"D6779-07a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2007,ASTM,"D6779-07 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2006,ASTM,"D6779-06e1 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2006,ASTM,"D6779-06 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2005,ASTM,"D6779-05 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2004,ASTM,"D6779-04a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2004,ASTM,"D6779-04 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2003,ASTM,"D6779-03 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2002,ASTM,"D6779-02a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2002,ASTM,"D6779-02 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2011,ASTM,"D6783-05(2011) Standard Specification for Polymer Concrete Pipe"
2011,ASTM,"D6783-05(2011) Standard Specification for Polymer Concrete Pipe (Redline)"
2003,ASTM,"D6783-03 Standard Specification for Polymer Concrete Pipe"
2002,ASTM,"D6783-02 Standard Specification for Polymer Concrete Pipe"
2002,ASTM,"D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)"
2011,ASTM,"D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2011,ASTM,"D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products (Redline)"
2010,ASTM,"D6864-10 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03e1 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03ae1 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03a Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2011,ASTM,"D6866-11  Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2008,ASTM,"D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2006,ASTM,"D6866-06a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2006,ASTM,"D6866-06 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2005,ASTM,"D6866-05 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2004,ASTM,"D6866-04a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2004,ASTM,"D6866-04 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2003,ASTM,"D6867-03 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2011,ASTM,"D6868-11  Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities"
2011,ASTM,"D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2011,ASTM,"D6953-11 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)"
2003,ASTM,"D6979-03 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen"
2004,ASTM,"D6980-04 Test Method for Determination of Moisture in Plastics by Loss in Weight"
2007,ASTM,"D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2003,ASTM,"D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2005,ASTM,"D7027-05e1 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine"
2005,ASTM,"D7027-05 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine"
2004,ASTM,"D7029-04 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2&#176;C]"
2004,ASTM,"D7082-04 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe"
2010,ASTM,"D7083-04(2010)e1 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography"
2010,ASTM,"D7107-04(2010) Standard Test Method for Creep Measurement of Self-Lubricating Bushings"
2011,ASTM,"D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids"
2005,ASTM,"D7191-05 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor"
2008,ASTM,"D7192-08a Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2008,ASTM,"D7192-08 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2005,ASTM,"D7192-05 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors"
2011,ASTM,"D7193-11 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2005,ASTM,"D7211-05 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use"
2011,ASTM,"D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2011,ASTM,"D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products (Redline)"
2009,ASTM,"D7251-09 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2006,ASTM,"D7251-06e1 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2006,ASTM,"D7251-06 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2011,ASTM,"D7252-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates"
2011,ASTM,"D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols"
2011,ASTM,"D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2007,ASTM,"D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2011,ASTM,"D7444-11  Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics"
2011,ASTM,"D7475-11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions"
2011,ASTM,"D7711-11e1 Standard Guide for Description of Polymer Pellet Defects"
2011,ASTM,"D7711-11 Standard Guide for Description of Polymer Pellets Including Defects"
2011,ASTM,"D7745-11 Standard Practice for Testing Pultruded Composites"
2011,ASTM,"D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)"
1995,ASTM,"D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)"
2011,ASTM,"D6041-11 Standard Specification for Contact-Molded &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
1997,ASTM,"D6041-97 Standard Specification for Contact-Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2011,ASTM,"D3489-11 Standard Test Methods for  Microcellular Urethane Materials"
2011,ASTM,"D3574-11 Standard Test Methods for Flexible Cellular Materials&mdash;Slab, Bonded, and Molded Urethane Foams"
2011,ASTM,"D3768-11 Standard Test Method for  Microcellular Urethanes&mdash;Flexural Recovery"
2011,ASTM,"D4745-11a Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2011,ASTM,"D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2011,ASTM,"D4812-11 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2011,ASTM,"D5025-11 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials"
2011,ASTM,"D5947-11 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens"
2011,ASTM,"D7310-11 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors"
2011,ASTM,"D7436-11 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology"
2011,ASTM,"D7774-11 Standard Test Method for Flexural Fatigue Properties of Plastics"
2005,ASTM,"F442/F442M-99(2005)e1 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
1997,ASTM,"F481-97 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields"
1995,ASTM,"F645-95 Standard Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems"
2011,ASTM,"F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings"
2006,ASTM,"F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing"
2005,ASTM,"F1674-05 Standard Test Method for Joint Restraint Products for Use with PVC Pipe"
2003,ASTM,"F1804-03 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2011,ASTM,"F1924-05(2011) Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2001,ASTM,"F1986-01 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems"
2004,ASTM,"F2080-04 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe"
2005,ASTM,"F2263-05 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water"
2011,ASTM,"F2418-11 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2011,ASTM,"F2764-11a Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2011,ASTM,"F2764-11a Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications (Redline)"
2000,ASTM,"D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2003,ASTM,"D5491-03 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2006,ASTM,"D5492-06 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
1994,ASTM,"D5526-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
1999,ASTM,"D5629-99 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2003,ASTM,"D5989-03 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
1996,ASTM,"D6042-96 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2004,ASTM,"D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2010,ASTM,"D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2003,ASTM,"D6263-98(2003) Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
1998,ASTM,"D6263-98 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
1999,ASTM,"D6457-99e1 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
2000,ASTM,"D6585-00 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2006,ASTM,"D7292-06 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)"
2006,ASTM,"D7293-06 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)"
2008,ASTM,"D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)"
2011,ASTM,"D6865-11  Standard Classification System and Basis for Specifications for Acrylonitrile&ndash;Styrene&ndash;Acrylate (ASA) and Acrylonitrile&ndash;EPDM<span class=""unicode"">&</span>"
2011,ASTM,"D4745-11ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2002,ASTM,"F438-02 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40"
2002,ASTM,"D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials"
2002,ASTM,"F1281-02e3 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe"
2001,ASTM,"D2235-01 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
2001,ASTM,"D2239-01 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2001,ASTM,"D3574-01 Standard Test Methods for Flexible Cellular Materials&#8212;Slab, Bonded, and Molded Urethane Foams"
2004,ASTM,"D4101-04 Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03b Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03a Standard Specification for Polypropylene Injection and Extrusion Materials"
2003,ASTM,"D4101-03 Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02b Standard Specification for Polypropylene Injection and Extrusion Materials"
2002,ASTM,"D4101-02a Standard Specification for Polypropylene Injection and Extrusion Materials"
2011,ASTM,"D788-11 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2011,ASTM,"D6358-11 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods"
2011,ASTM,"D6394-11 Standard Specification for  Sulfone Plastics (SP)"
2012,ASTM,"F1732-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material "
2011,ASTM,"D3567-97(2011) Standard Practice for  Determining Dimensions of &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2008,ASTM,"D1044-08e1 Standard Test Method for  Resistance of Transparent Plastics to Surface Abrasion"
2012,ASTM,"D2513-12a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"D2517-06(2011) Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings "
2011,ASTM,"D4603-03(2011)e1 Standard Test Method for  Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
1998,ASTM,"D6262-98 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2003,ASTM,"D6262-98(2003) Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2012,ASTM,"F667-12 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2012,ASTM,"F645-12 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems "
2012,ASTM,"D1693-12 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
2012,ASTM,"F2922-12 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers"
2012,ASTM,"D1785-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 "
2012,ASTM,"D1929-12 Standard Test Method for  Determining Ignition Temperature of Plastics"
2012,ASTM,"D2116-07(2012) Standard Specification for  FEP-Fluorocarbon Molding and Extrusion Materials"
2012,ASTM,"D2239-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter "
2012,ASTM,"F1867-06(2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
2012,ASTM,"D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer"
2012,ASTM,"F2138-12 Standard Specification for Excess Flow Valves for Natural Gas Service"
2012,ASTM,"F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2012,ASTM,"D2737-12e1 Standard Specification for  Polyethylene (PE) Plastic Tubing "
2012,ASTM,"F714-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter "
2012,ASTM,"F2509-06(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled  Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"D3350-12 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2012,ASTM,"D3419-12 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds"
2012,ASTM,"F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) "
2012,ASTM,"F2418-12 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2012,ASTM,"D3641-12 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials"
2012,ASTM,"F2657-07(2012) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing"
2012,ASTM,"F412-12 Standard Terminology Relating to  Plastic Piping Systems "
2012,ASTM,"F2855-12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing"
2012,ASTM,"F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings"
2012,ASTM,"F480-12 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 "
2012,ASTM,"F667-12 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)"
2012,ASTM,"F714-12e1 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2012,ASTM,"F1948-12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing"
2012,ASTM,"F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"D7473-12 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations"
2012,ASTM,"D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2012,ASTM,"D3753-12 Standard Specification for  Glass-Fiber-Reinforced Polyester Manholes and Wetwells "
2012,ASTM,"F2831-12 Standard Practice for  Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems"
2012,ASTM,"F2947-12 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2012,ASTM,"D4000-12 Standard Classification System for  Specifying Plastic Materials"
2012,ASTM,"D4660-12 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate"
2012,ASTM,"D4591-07(2012) Standard Test Method for  Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2012,ASTM,"D4894-07(2012) Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials "
2012,ASTM,"D4969-07(2012) Standard Specification for  Polytetrafluoroethylene&ndash;(PTFE) Coated Glass Fabric"
2012,ASTM,"D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D4024-12 Standard Specification for Machine Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2012,ASTM,"D3917-12 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes"
2012,ASTM,"D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe "
2012,ASTM,"D5526-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2012,ASTM,"D5594-98(2012) Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2012,ASTM,"D2665-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings "
2012,ASTM,"D5988-12 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in Soil"
2012,ASTM,"D6248-98(2012) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2012,ASTM,"D6262-12 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2012,ASTM,"D6400-12 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities"
2012,ASTM,"D1603-12 Standard Test Method for  Carbon Black Content in Olefin Plastics"
2012,ASTM,"D6778-12 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)"
2012,ASTM,"D6779-12 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2012,ASTM,"D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2012,ASTM,"D7793-12 Standard Specification for Insulated Vinyl Siding"
2012,ASTM,"D7791-12 Standard Test Method for Uniaxial Fatigue Properties of Plastics"
2012,ASTM,"D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight"
2012,ASTM,"D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)"
2012,ASTM,"D7774-12 Standard Test Method for Flexural Fatigue Properties of Plastics"
2012,ASTM,"D2513-12 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"D5511-12 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2012,ASTM,"D2737-12 Standard Specification for  Polyethylene (PE) Plastic Tubing "
2012,ASTM,"D3681-12 Standard Test Method for  Chemical Resistance of &ldquo;Fiberglass&rdquo; (Glass&ndash;Fiber&ndash;Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2012,ASTM,"D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds (Redline)"
2012,ASTM,"D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2012,ASTM,"D4495-12 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2012,ASTM,"D5748-95(2012) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film "
2012,ASTM,"D1248-12 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable"
2012,ASTM,"D2774-12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping "
2012,ASTM,"D2863-12 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)"
2012,ASTM,"D2992-12 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2012,ASTM,"F409-12 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2012,ASTM,"F439-12 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2012,ASTM,"F441/F441M-12 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2012,ASTM,"F442/F442M-12 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&ndash;PR)"
2012,ASTM,"F512-12 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2012,ASTM,"F714-12a Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2012,ASTM,"D787-12 Standard Specification for  Ethyl Cellulose Molding and Extrusion Compounds"
2012,ASTM,"D788-12 Standard Classification System for  Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2012,ASTM,"D882-12 Standard Test Method for  Tensile Properties of Thin Plastic Sheeting"
2012,ASTM,"D883-12 Standard Terminology Relating to  Plastics"
2012,ASTM,"D957-12 Standard Practice for  Determining Surface Temperature of Molds for Plastics"
2012,ASTM,"D1201-99(2012) Standard Specification for Thermosetting Polyester Molding Compounds"
1979,ASTM,"D1243-79 Standard Test Method for Dilute Solution Viscosity Of Vinyl Chloride Polymers"
2012,ASTM,"D1494-12 Standard Test Method for  Diffuse Light Transmission Factor of Reinforced Plastics Panels"
1979,ASTM,"D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique"
1969,ASTM,"D1593-61(1969) Standard Specification For Nonrigid Vinyl Chloride Plastic Sheeting"
2012,ASTM,"D1601-12 Standard Test Method for  Dilute Solution Viscosity of Ethylene Polymers"
1978,ASTM,"D1601-78 Standard Test Method for Dilute Solution Viscosity Of Ethylene Polymers"
2012,ASTM,"D1636-99(2012) Standard Specification for  Allyl Molding Compounds"
2012,ASTM,"F1483-12 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
1980,ASTM,"D1824-66(1980)e1 Standard Test Method for Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer"
2012,ASTM,"C1147-01(2012) Standard Practice for  Determining the Short Term Tensile Weld Strength of Chemical-Resistant  Thermoplastics"
2012,ASTM,"F1804-08(2012) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2012,ASTM,"F1807-12 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2012,ASTM,"D2238-92(2012)e1 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>&minus;1</sup>"
2012,ASTM,"D2287-12 Standard Specification for  Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion  Compounds"
2012,ASTM,"D2310-06(2012) Standard Classification for  Machine-Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2012,ASTM,"F1960-12 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2012,ASTM,"D2513-12ae1 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2080-12 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene (PEX) Pipe"
2012,ASTM,"D2564-12 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
1979,ASTM,"D2584-68(1979)e1 Standard Test Method for Ignition Loss Of Cured Reinforced Resins"
2012,ASTM,"D2737-12a Standard Specification for  Polyethylene (PE) Plastic Tubing"
2012,ASTM,"D2842-12 Standard Test Method for  Water Absorption of Rigid Cellular Plastics"
1977,ASTM,"D2857-70(1977) Standard Test Method for Dilute Solution Viscosity Of Polymers"
2012,ASTM,"F2435-12 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2012,ASTM,"D2924-12 Standard Test Method for  External Pressure Resistance of &ldquo;Fiberglass&rdquo;<brk> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe</brk>"
2012,ASTM,"F2620-12 Standard Practice for  Heat Fusion Joining of Polyethylene Pipe and Fittings"
2012,ASTM,"D3013-99(2012) Standard Specification for Epoxy Molding Compounds"
2003,ASTM,"D3016-97(2003) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
1997,ASTM,"D3016-97 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships"
2012,ASTM,"D3035-12e1 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2012,ASTM,"F2922-12e1 Standard Specification for  Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers"
2012,ASTM,"D3261-12 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2012,ASTM,"D3308-12 Standard Specification for  PTFE Resin Skived Tape"
2012,ASTM,"F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings"
2012,ASTM,"F1970-12 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2010,ASTM,"F2164-10e1 Standard Practice for  Field Leak Testing of Polyethylene (PE) Pressure Piping Systems   Using Hydrostatic Pressure"
2012,ASTM,"F2487-06(2012) Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene Pipelines"
2012,ASTM,"F2509-12 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene Gas Distribution Pipe and Tubing"
2012,ASTM,"D3418-12 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2012,ASTM,"F2767-12 Standard Specification for  Electrofusion Type Polyamide-12 Fittings for Outside Diameter   Controlled Polyamide-12 Pipe and Tubing for Gas Distribution"
2012,ASTM,"F2785-12 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2945-12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2946-12 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining  Plastic Pipe to Insitu Pipelines and Manholes"
2012,ASTM,"F2969-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure  Pipe"
2012,ASTM,"D3453-12 Standard Specification for  Flexible Cellular Materials&mdash;Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications"
1978,ASTM,"D3676-78e1 Standard Specification for Rubber Cellular Cushion Used For Carpet Or Rug Underlay"
2012,ASTM,"D3749-12 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2012,ASTM,"D3795-00a(2012) Standard Test Method for  Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer"
2012,ASTM,"D3851-07(2012) Standard Specification for  Urethane Microcellular Shoe Soling Materials"
2012,ASTM,"D4065-12 Standard Practice for  Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures "
2012,ASTM,"D4204-12 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2012,ASTM,"D4459-12 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2012,ASTM,"D4670-07(2012)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols"
2012,ASTM,"D4672-12 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols "
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D5025-12 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2012,ASTM,"D5507-99(2012) Standard Test Method for  Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2012,ASTM,"D5813-04(2012) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2012,ASTM,"D5948-05(2012) Standard Specification for Molding Compounds, Thermosetting"
2012,ASTM,"D6040-12 Standard Guide to  Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2012,ASTM,"D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2012,ASTM,"D6342-12 Standard Practice for  Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2012,ASTM,"D6474-12 Standard Test Method for  Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2012,ASTM,"D6779-12a Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2012,ASTM,"D7194-12 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)"
2012,ASTM,"D7292-12 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI)"
2012,ASTM,"D7293-12 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI)"
2012,ASTM,"D4526-12 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2012,ASTM,"D704-99(2012) Standard Specification for  Melamine-Formaldehyde Molding Compounds"
2012,ASTM,"D705-99(2012) Standard Specification for  Urea-Formaldehyde Molding Compounds"
2012,ASTM,"D1042-12 Standard Test Method for  Linear Dimensional Changes of Plastics Caused by Exposure to  Heat and Moisture"
2012,ASTM,"D1921-12 Standard Test Methods for  Particle Size (Sieve Analysis) of Plastic Materials"
2012,ASTM,"D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter"
2012,ASTM,"D2561-12 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
1970,ASTM,"D2565-70 Standard Recommended Practice For Operating Xenon Arc-Type  (Water-Cooled) Light - And Water-Exposure Apparatus For Exposure Of Plastics"
1968,ASTM,"D2584-68 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins"
2012,ASTM,"D3035-12 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2012,ASTM,"D3308-12 Standard Specification for  PTFE Resin Skived Tape (Redline)"
1977,ASTM,"D3574-77e2 Standard Methods of Testing Flexible Cellular Materials-Slab, Bonded, And Molded Urethane Foams"
2012,ASTM,"D3675-12 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2012,ASTM,"D4203-12 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2012,ASTM,"D4443-12 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2012,ASTM,"D4551-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials (Redline)"
2012,ASTM,"D5319-12 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2012,ASTM,"D7436-12 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology"
2012,ASTM,"D7568-12 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications"
2005,ASTM,"F1057-87(2005) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
2000,ASTM,"F1057-87(2000) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique"
1972,ASTM,"D1824-66(1972) Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer"
1997,ASTM,"F1802-97 Standard Test Method for Performance Testing of Excess Flow Valves"
1997,ASTM,"F1804-97 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation"
2002,ASTM,"D2562-94(2002)e1 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2002,ASTM,"D2749-02 Standard Symbols for Dimensions of Plastic Pipe Fittings"
1999,ASTM,"D2749-92(1999)e1 Standard Symbols for Dimensions of Plastic Pipe Fittings"
2004,ASTM,"F2331-04e1 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic   Threaded Pipe and Fittings Materials"
2012,ASTM,"D3418-12e1 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2012,ASTM,"F2945-12 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F628-12e1 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields"
1977,ASTM,"F405-77ae1 Standard Specification for Corrugated Polyethylene (PE) Tubing And Fittings"
2013,ASTM,"F412-13 Standard Terminology Relating to  Plastic Piping Systems"
2012,ASTM,"F628-12 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
1991,ASTM,"F628-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core"
1979,ASTM,"F628-79e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe Having A Foam Core"
2013,ASTM,"F645-13 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2012,ASTM,"F645-12a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2012,ASTM,"F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields (Redline)"
2013,ASTM,"F876-13 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F1055-13 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2012,ASTM,"F1055-12 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing"
2012,ASTM,"F1973-12 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2013,ASTM,"F2164-13 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2013,ASTM,"F2306/F2306M-13 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications"
2012,ASTM,"F2390-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2013,ASTM,"F2510/F2510M-07(2013) Standard Specification for  Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated High Density Polyethylene Drainage Pipes"
2013,ASTM,"F2648/F2648M-13 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications"
2013,ASTM,"F2658-07(2013) Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer  Pipe and Fittings"
2012,ASTM,"F2736-12 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2013,ASTM,"F2787-13 Standard Practice for  Structural Design of Thermoplastic Corrugated Wall Stormwater   Collection Chambers"
2013,ASTM,"F2787-13 Standard Practice for  Structural Design of Thermoplastic Corrugated Wall Stormwater   Collection Chambers (Redline)"
2011,ASTM,"F2897-11ae1 Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2012,ASTM,"F2986-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate  Applications"
2012,ASTM,"F2987-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach  Aeration Applications"
2001,ASTM,"D4066-01a Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2001,ASTM,"D4066-01 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2000,ASTM,"D4066-00a Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2013,ASTM,"F442/F442M-13 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&ndash;PR)"
2000,ASTM,"D4066-00 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2013,ASTM,"F1733-13 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing"
2013,ASTM,"F1807-13 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2013,ASTM,"F1973-13 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2013,ASTM,"F2145-13 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2013,ASTM,"F441/F441M-13 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2013,ASTM,"F714-13 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2013,ASTM,"F2929-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and  Fittings for Radiant Heating Systems up to 75 psig"
1994,ASTM,"D4066-94b Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1988,ASTM,"D2235-88 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings"
1997,ASTM,"D635-97 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position"
2008,ASTM,"D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between  &minus;30&deg;C and 30&deg;C with a Vitreous Silica Dilatometer"
1997,ASTM,"D882-97 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
1992,ASTM,"D1003-92 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics"
2013,ASTM,"D1004-13 Standard Test Method for  Tear Resistance (Graves Tear) of Plastic Film and Sheeting"
1968,ASTM,"D1056-68e1 Standard Specification for Sponge and Expanded Cellular Rubber Products"
1990,ASTM,"D1238-90b Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer"
1985,ASTM,"D1238-85 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer"
1989,ASTM,"D1248-84(1989)e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
1994,ASTM,"D1435-94 Standard Practice for Outdoor Weathering of Plastics"
1990,ASTM,"D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique"
1987,ASTM,"D1525-87 Standard Test Method for Vicat Softening Temperature of Plastics"
2013,ASTM,"D1600-13 Standard Terminology for  Abbreviated Terms Relating to Plastics"
1994,ASTM,"D1621-94 Standard Test Method for Compressive Properties of Rigid Cellular Plastics"
1990,ASTM,"D1667-76(1990) Standard Specification for Flexible Cellular MaterialsÐVinyl Chloride Polymers and Copolymers (Closed-Cell Foam)"
2013,ASTM,"D1693-13 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
1988,ASTM,"D2287-81(1988)e1 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds"
2012,ASTM,"D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe"
1974,ASTM,"D2321-74 Recommended Practice for Underground Installation Of Flexible Thermoplastic Sewer Pipe"
2013,ASTM,"D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2013,ASTM,"D2467-13 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
1999,ASTM,"D2513-99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
1991,ASTM,"D2564-91a Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems"
1991,ASTM,"D2564-91 Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems"
1992,ASTM,"D2565-92 Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus with and Without Water for Exposure of Plastics"
2013,ASTM,"D2583-13 Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor"
1991,ASTM,"D2661-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings"
1978,ASTM,"D2661-78 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe And Fittings"
1991,ASTM,"D2665-91b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1991,ASTM,"D2665-91a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1991,ASTM,"D2665-91 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings"
1978,ASTM,"D2665-78 Standard Specification for Poly(inyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings"
2010,ASTM,"D2683-10e1 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
1978,ASTM,"D2729-78e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe And Fittings"
2013,ASTM,"D2749-13 Standard Symbols for  Dimensions of Plastic Pipe Fittings"
2013,ASTM,"D2749-13 Standard Symbols for  Dimensions of Plastic Pipe Fittings (Redline)"
1977,ASTM,"D2751-77ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe And Fittings"
2012,ASTM,"D2863-12e1 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index)"
1995,ASTM,"D2863-95 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) "
1978,ASTM,"D2949-78 Standard Specification for 3.25- In. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings"
2013,ASTM,"D3012-13 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven"
2013,ASTM,"D3212-07(2013) Standard Specification for  Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2013,ASTM,"D3275-08(2013) Standard Classification System for  E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
1992,ASTM,"D3311-92 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2012,ASTM,"D3350-12e1 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
1988,ASTM,"D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis"
2013,ASTM,"D3594-93(2013) Standard Test Method for  Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers"
2013,ASTM,"D3676-13 Standard Specification for  Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1989,ASTM,"D3676-78(1989)e1 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
1988,ASTM,"D3678-88 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2012,ASTM,"D3753-12e1 Standard Specification for  Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2013,ASTM,"D3826-98(2013) Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test"
1991,ASTM,"D3826-91e1 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
1983,ASTM,"D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer"
2013,ASTM,"D4000-13 Standard Classification System for  Specifying Plastic Materials"
2013,ASTM,"D4092-07(2013) Standard Terminology for  Plastics: Dynamic Mechanical Properties"
1988,ASTM,"D4101-82(1988)e1 Standard Specification for Propylene Plastic Injection and Extrusion Materials"
2013,ASTM,"D4669-07(2013)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2013,ASTM,"D4890-13 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2013,ASTM,"D5071-06(2013) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2013,ASTM,"D5206-13 Standard Test Method for Windload Resistance of Rigid Plastic Siding"
2013,ASTM,"D5272-08(2013) Standard Practice for  Outdoor Exposure Testing of Photodegradable Plastics"
2013,ASTM,"D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin  Copolymers by Infrared Spectrophotometry (FT-IR)"
2013,ASTM,"D5630-13 Standard Test Method for Ash Content in Plastics"
2013,ASTM,"D5630-13 Standard Test Method for Ash Content in Plastics (Redline)"
2013,ASTM,"D6289-13 Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics"
2013,ASTM,"D6289-13 Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics (Redline)"
2013,ASTM,"D6954-04(2013) Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation"
2013,ASTM,"D6988-13 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens"
2013,ASTM,"D7026-13 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis"
2013,ASTM,"D7210-13 Standard Practice for  Extraction of Additives in Polyolefin Plastics"
2013,ASTM,"D7211-13 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2013,ASTM,"D7823-13 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl  Chloride) Plastics by Thermal Desorption&mdash;Gas Chromatography/Mass  Chromatography"
2013,ASTM,"D746-13 Standard Test Method for  Brittleness Temperature of Plastics and Elastomers by Impact"
2013,ASTM,"D6457-08(2013) Standard Specification for  Extruded and Compression Molded Rod and Heavy-Walled Tubing  Made from Polytetrafluoroethylene (PTFE)"
2013,ASTM,"D7611/D7611M-13 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2013,ASTM,"D2464-13 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2013,ASTM,"D2513-13 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2010,ASTM,"D7611/D7611M-10 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2013,ASTM,"D618-13 Standard Practice for  Conditioning Plastics for Testing"
2013,ASTM,"D1435-13 Standard Practice for  Outdoor Weathering of Plastics"
2013,ASTM,"D2152-13 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2013,ASTM,"D4066-13 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1996,ASTM,"D4066-96ae1 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
1996,ASTM,"D4066-96 Standard Classification System for Nylon Injection and Extrusion Materials (PA)"
2013,ASTM,"D5227-13 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins"
2013,ASTM,"D6108-13 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2013,ASTM,"D6109-13 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products"
2013,ASTM,"D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2013,ASTM,"D6112-13 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2013,ASTM,"D6117-13 Standard Test Methods for  Mechanical Fasteners in Plastic Lumber and Shapes"
2013,ASTM,"D6341-13 Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F (&ndash;34.4 and 60&deg;C)"
2013,ASTM,"D6662-13 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2013,ASTM,"D7568-13 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
1991,ASTM,"D494-91 Test Method for Acetone Extraction of Phenolic Molded or Laminated Products (Withdrawn 1998)"
2003,ASTM,"F690-86(2003)e2 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
2003,ASTM,"F690-86(2003)e1 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
2003,ASTM,"F690-86(2003) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
1994,ASTM,"F690-86(1994) Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems"
1999,ASTM,"D731-95(1999) Standard Test Method for Molding Index of Thermosetting Molding Powder (Withdrawn 2008)"
2013,ASTM,"D1201-13 Standard Specification for  Thermosetting Polyester Molding Compounds"
2013,ASTM,"D1499-13 Standard Practice for  Filtered Open-Flame Carbon-Arc Exposures of Plastics"
1999,ASTM,"D1593-99 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting (Withdrawn 2008)"
1997,ASTM,"D1598-97 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2008,ASTM,"F1498-08 Standard Specification for Taper Pipe Threads 60&#176; for Thermoplastic Pipe and Fittings (Redline)"
2002,ASTM,"D1708-02 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens"
1995,ASTM,"F1606-95 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner (Withdrawn 2004)"
1995,ASTM,"D1824-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates"
2001,ASTM,"D1929-96(2001)e1 Standard Test Method for Determining Ignition Temperature of Plastics (Withdrawn 2010)"
2002,ASTM,"F1871-02e1 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation (Withdrawn 2011)"
2001,ASTM,"D2513-01a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings"
2001,ASTM,"D2538-95(2001) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer"
1994,ASTM,"D2562-94 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics"
2001,ASTM,"D2741-95(2001) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
1995,ASTM,"D2741-95 Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation"
1996,ASTM,"D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene"
1989,ASTM,"D3275-89 Standard Specification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
1995,ASTM,"D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film"
2013,ASTM,"F441/F441M-13e1 Standard Specification for  Chlorinated Poly&amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;CPVC&amp;rpar; Plastic Pipe, Schedules  40 and 80"
2013,ASTM,"F442/F442M-13e1 Standard Specification for  Chlorinated Poly&amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;CPVC&amp;rpar; Plastic Pipe &amp;lpar;SDR–PR&amp;rpar;"
2013,ASTM,"F405-13 Standard Specification for  Corrugated Polyethylene (PE) Pipe and Fittings"
2013,ASTM,"F405-13 Standard Specification for  Corrugated Polyethylene (PE) Pipe and Fittings (Redline)"
1992,ASTM,"D3596-92 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins (Withdrawn 2001)"
2013,ASTM,"F439-13 Standard Specification for  Chlorinated Poly &amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;CPVC&amp;rpar; Plastic Pipe Fittings,   Schedule 80"
2013,ASTM,"F585-13 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2013,ASTM,"F679-13 Standard Specification for  Poly&amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;PVC&amp;rpar; Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
1995,ASTM,"D3749-95 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique"
1999,ASTM,"D3814-99 Standard Guide for Locating Combustion Test Methods for Polymeric Materials"
1998,ASTM,"D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test"
2008,ASTM,"D3839-08 Standard Guide for Underground Installation of &ldquo;Fiberglass&rdquo; (Glass-FiberReinforced Thermosetting-Resin) Pipe (Redline)"
1996,ASTM,"D4275-96 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography"
1995,ASTM,"D4443-95 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF)"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF) (Redline)"
1996,ASTM,"D4617-96 Standard Specification for Phenolic Compounds, (PF)"
2001,ASTM,"D4801-95(2001) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2000,ASTM,"D4968-00 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D5206-96(2002)e1 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding"
1991,ASTM,"D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics (Withdrawn 2000)"
1994,ASTM,"D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2005,ASTM,"D6262-05 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) (Withdrawn 2010)"
2001,ASTM,"D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
1996,ASTM,"D5991-96 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2002,ASTM,"D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) (Withdrawn 2011)"
2002,ASTM,"D6041-97(2002) Standard Specification for Contact-Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Withdrawn 2011)"
2012,ASTM,"D2924-12 Standard Test Method for  External Pressure Resistance of &ldquo;Fiberglass&rdquo;<brk> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe</brk> (Redline)"
1995,ASTM,"D570-95 Standard Test Method for Water Absorption of Plastics"
1993,ASTM,"D1622-93 Standard Test Method for Apparent Density of Rigid Cellular Plastics"
1985,ASTM,"D2584-68(1985) Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2013,ASTM,"D542-13 Standard Test Method for  Index of Refraction of Transparent Organic Plastics"
2013,ASTM,"D1044-13 Standard Test Method for  Resistance of Transparent Plastics to Surface Abrasion"
2013,ASTM,"D1201-13 Standard Specification for  Thermosetting Polyester Molding Compounds (Redline)"
2013,ASTM,"D1238-13 Standard Test Method for  Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2013,ASTM,"D1499-13 Standard Practice for  Filtered Open-Flame Carbon-Arc Exposures of Plastics (Redline)"
1994,ASTM,"D1693-94 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics"
2013,ASTM,"D1708-13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens"
2009,ASTM,"D1896-09 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds"
2004,ASTM,"D1896-99(2004) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds"
1999,ASTM,"D1896-99 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds"
2013,ASTM,"D2466-13 Standard Specification for  Poly&amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;PVC&amp;rpar; Plastic Pipe Fittings, Schedule  40"
2013,ASTM,"D2467-13a Standard Specification for  Poly&amp;lpar;Vinyl Chloride&amp;rpar; &amp;lpar;PVC&amp;rpar; Plastic Pipe Fittings, Schedule  80"
1987,ASTM,"D2513-87 Standard Specification for Thermoplastic Gas Pressure Piping Systems"
2013,ASTM,"D2583-13a Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor"
2013,ASTM,"D2583-13a Standard Test Method for  Indentation Hardness of Rigid Plastics by Means of a Barcol  Impressor (Redline)"
1992,ASTM,"D2846-92a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
1992,ASTM,"D2846-92 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems"
2013,ASTM,"D2863-13 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics &amp;lpar;Oxygen Index&amp;rpar;"
2013,ASTM,"D2923-13 Standard Test Method for  Rigidity of Polyolefin Film and Sheeting"
2013,ASTM,"D2923-13 Standard Test Method for  Rigidity of Polyolefin Film and Sheeting (Redline)"
2013,ASTM,"D3013-13 Standard Specification for  Epoxy Molding Compounds"
2013,ASTM,"D3013-13 Standard Specification for  Epoxy Molding Compounds (Redline)"
2013,ASTM,"D4329-13 Standard Practice for  Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight (Redline)"
2013,ASTM,"D4819-13 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics"
2013,ASTM,"D4819-13 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics (Redline)"
2013,ASTM,"D5204-13 Standard Classification System for  Polyamide-Imide &amp;lpar;PAI&amp;rpar; Molding and Extrusion Materials"
2013,ASTM,"D5279-13 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion"
2013,ASTM,"D5675-13 Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2013,ASTM,"D6099-13 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates"
2013,ASTM,"D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2013,ASTM,"D7793-13 Standard Specification for  Insulated Vinyl Siding"
2001,ASTM,"F913-01 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2001,ASTM,"F1336-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
1997,ASTM,"F1504-97 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation"
1998,ASTM,"F1865-98 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing"
1998,ASTM,"F1871-98 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation"
1999,ASTM,"F1961-99 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F725-03(2013) Standard Practice for  Drafting Impact Test Requirements In Thermoplastic Pipe And  Fittings Standards"
2013,ASTM,"F876-13a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2013,ASTM,"F894-13 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe"
2013,ASTM,"F1365-91(2013) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2013,ASTM,"F1473-13 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2013,ASTM,"F1675-13 Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2013,ASTM,"F1675-13 Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits (Redline)"
2013,ASTM,"F1807-13a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene &amp;lpar;PEX&amp;rpar; Tubing and SDR9 Polyethylene of Raised   Temperature &amp;lpar;PE-RT&amp;rpar; Tubing"
2013,ASTM,"F1866-13 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2012,ASTM,"F1970-12e1 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2013,ASTM,"F2207-06(2013) Standard Specification for  Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2013,ASTM,"F2231-02(2013) Standard Test Method for  Charpy Impact Test on Thin Specimens of Polyethylene Used in  Pressurized Pipes"
2013,ASTM,"F2418-13 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2013,ASTM,"F2433-05(2013) Standard Test Method for  Determining Thermoplastic Pipe Wall Stiffness"
2013,ASTM,"F2817-13 Standard Specification for  Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings   For Maintenance or Repair"
2013,ASTM,"F2817-13 Standard Specification for  Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings   For Maintenance or Repair (Redline)"
1997,ASTM,"D1996-97 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)"
2001,ASTM,"D2104-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40"
1999,ASTM,"D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)"
2001,ASTM,"D2447-01 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter"
1996,ASTM,"D3309-96a Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems"
1999,ASTM,"D4166-99 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument"
1997,ASTM,"D4225-97 Standard Specification for Styrene-Butadiene Sheeting"
2000,ASTM,"F699-00 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing"
2001,ASTM,"F1176-01 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi"
1998,ASTM,"F1335-98 Standard Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service"
1995,ASTM,"D2151-95 Standard Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients"
1997,ASTM,"D2288-97 Standard Test Method for Weight Loss of Plasticizers on Heating"
1996,ASTM,"D3369-96 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film"
1996,ASTM,"D4322-96 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography"
1996,ASTM,"D6002-96 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics"
1996,ASTM,"D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending"
1992,ASTM,"D4923-92 Standard Specification for Reinforced Thermosetting Plastic Poles"
1994,ASTM,"D5524-94 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography"
1994,ASTM,"D5510-94 Standard Practice for Heat Aging of Oxidatively Degradable Plastics"
1995,ASTM,"D5815-95 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)"
1996,ASTM,"D5951-96 Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing"
1993,ASTM,"D5271-93 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System"
1995,ASTM,"F1589-95 Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe"
1998,ASTM,"F1474-98 Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe"
1993,ASTM,"F1176-93 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi"
1999,ASTM,"D2104-99e1 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40"
1999,ASTM,"D2447-99 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter"
1997,ASTM,"D3485-97 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable"
2002,ASTM,"D2176-97a(2002) Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester"
2002,ASTM,"F1380-95a(2002) Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing"
1998,ASTM,"F1335-98e1 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service"
1999,ASTM,"D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)"
2013,ASTM,"F2928-13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE)  Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods"
2013,ASTM,"F2905/F2905M-13 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and  Joints For Oil and Gas Producing Applications"
2013,ASTM,"F2994-13 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP)  Impregnation Systems"
2013,ASTM,"F3034-13 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene (HDPE)"
2013,ASTM,"D6261-13 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester (TPES)"
2013,ASTM,"D1593-13 Standard Specification for  Nonrigid Vinyl Chloride Plastic Film and Sheeting"
2013,ASTM,"D1998-13 Standard Specification for  Polyethylene Upright Storage Tanks"
2013,ASTM,"D4756-13 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
2013,ASTM,"D5436-13 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2013,ASTM,"D1636-13 Standard Specification for  Allyl Molding Compounds"
2013,ASTM,"D7027-13 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine"
2013,ASTM,"D1822-13 Standard Test Method for  Tensile-Impact Energy to Break Plastics and Electrical Insulating  Materials"
2013,ASTM,"D3679-13 Standard Specification for  Rigid Poly (Vinyl Chloride) (PVC) Siding"
2013,ASTM,"D4001-13 Standard Test Method for  Determination of Weight-Average Molecular Weight of Polymers  By Light Scattering"
2013,ASTM,"D792-13 Standard Test Methods for  Density and Specific Gravity (Relative Density) of Plastics  by Displacement"
2013,ASTM,"D1929-13 Standard Test Method for  Determining Ignition Temperature of Plastics"
2013,ASTM,"D2222-13 Standard Test Method for  Methanol Extract of Vinyl Chloride Resins"
2013,ASTM,"D3367-13 Standard Test Method for  Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force"
2013,ASTM,"D3596-13 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins"
2013,ASTM,"D3749-13 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2013,ASTM,"D4216-13 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2013,ASTM,"D4443-13 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2013,ASTM,"D6290-13 Standard Test Method for  Color Determination of Plastic Pellets"
2013,ASTM,"D6979-13 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen"
2013,ASTM,"D7487-13 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2013,ASTM,"D4661-13 Standard Test Methods for  Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2013,ASTM,"D7132-13 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2013,ASTM,"D7309-13 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2013,ASTM,"D1003-13 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics"
2013,ASTM,"F2023-13 Standard Test Method for  Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Tubing and Systems to Hot Chlorinated Water"
2013,ASTM,"F2922-13 Standard Specification for  Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers"
2013,ASTM,"D4385-13 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2013,ASTM,"D6576-13 Standard Specification for  Flexible Cellular Rubber Chemically Blown"
2013,ASTM,"F2165-13 Standard Specification for  Flexible Pre-Insulated Piping"
2013,ASTM,"F2487-13 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2013,ASTM,"F2736-13 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2013,ASTM,"F2736-13 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe (Redline)"
2013,ASTM,"F2807-13 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure  Piping Applications"
2013,ASTM,"F2788/F2788M-13 Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe"
2013,ASTM,"D4350-13 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2013,ASTM,"D2837-13 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2013,ASTM,"F2619/F2619M-13 Standard Specification for  High-Density Polyethylene &#40;PE&#41; Line Pipe"
2014,ASTM,"D7258-14 Standard Specification for  Polymeric Piles"
2013,ASTM,"F2984-13 Standard Specification for Segmental Panel System for the Grout-in-Place-Liner &#40;GIPL&#41;  Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts,  and Conduits"
2013,ASTM,"F2620-13 Standard Practice for  Heat Fusion Joining of Polyethylene Pipe and Fittings"
2014,ASTM,"D3575-14 Standard Test Methods for  Flexible Cellular Materials Made From Olefin Polymers"
2014,ASTM,"D7856-14 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2014,ASTM,"D1894-14 Standard Test Method for  Static and Kinetic Coefficients of Friction of Plastic Film  and Sheeting"
2014,ASTM,"D1894-14 Standard Test Method for  Static and Kinetic Coefficients of Friction of Plastic Film  and Sheeting (Redline)"
2014,ASTM,"D3368-14 Standard Specification for  FEP-Fluorocarbon Sheet and Film"
2014,ASTM,"D3517-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pressure Pipe"
2014,ASTM,"D3754-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Sewer and Industrial Pressure Pipe"
2014,ASTM,"D4101-14 Standard Specification for  Polypropylene Injection and Extrusion Materials"
2014,ASTM,"D4101-14 Standard Specification for  Polypropylene Injection and Extrusion Materials (Redline)"
2014,ASTM,"D1600-14 Standard Terminology for  Abbreviated Terms Relating to Plastics"
2014,ASTM,"D3035-14 Standard Specification for  Polyethylene &#40;PE&#41; Plastic Pipe &#40;DR-PR&#41; Based on Controlled   Outside Diameter"
2014,ASTM,"D542-14 Standard Test Method for  Index of Refraction of Transparent Organic Plastics"
2014,ASTM,"D2383-14 Standard Practice for  Testing Plasticizer Compatibility in Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41;  Compounds Under Humid Conditions"
2014,ASTM,"D3748-14 Standard Practice for  Evaluating High-Density Rigid Cellular Plastics"
2014,ASTM,"D3748-14 Standard Practice for  Evaluating High-Density Rigid Cellular Plastics (Redline)"
2014,ASTM,"F480-14 Standard Specification for  Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios &#40;SDR&#41;, SCH 40 and SCH 80"
2014,ASTM,"F480-14 Standard Specification for  Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios &#40;SDR&#41;, SCH 40 and SCH 80 (Redline)"
2014,ASTM,"D3034-14 Standard Specification for  Type PSM Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Sewer Pipe and Fittings"
2014,ASTM,"F2947/F2947M-14 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2014,ASTM,"D1204-14 Standard Test Method for  Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting  or Film at Elevated Temperature"
2014,ASTM,"D3465-14 Standard Test Method for  Purity of Monomeric Plasticizers by Gas Chromatography"
2014,ASTM,"D3641-14 Standard Practice for  Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2014,ASTM,"D4659-14 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates"
2014,ASTM,"D6436-14 Standard Guide for  Reporting Properties for Plastics and Thermoplastic Elastomers"
2014,ASTM,"D6436-14 Standard Guide for  Reporting Properties for Plastics and Thermoplastic Elastomers (Redline)"
2014,ASTM,"D7132-14 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2014,ASTM,"D1045-14 Standard Test Methods for  Sampling and Testing Plasticizers Used in Plastics"
2014,ASTM,"D3296-14 Standard Specification for  FEP-Fluorocarbon Tube"
2014,ASTM,"D3595-14 Standard Specification for  Polychlorotrifluoroethylene &#40;PCTFE&#41; Extruded Plastic Sheet  and Film"
2014,ASTM,"D3595-14 Standard Specification for  Polychlorotrifluoroethylene &#40;PCTFE&#41; Extruded Plastic Sheet  and Film (Redline)"
2014,ASTM,"D3675-14 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2014,ASTM,"D3840-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pipe Fittings for Nonpressure Applications"
2014,ASTM,"D4161-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pipe Joints Using Flexible Elastomeric Seals"
2014,ASTM,"D4161-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pipe Joints Using Flexible Elastomeric Seals (Redline)"
2014,ASTM,"D1056-14 Standard Specification for  Flexible Cellular Materials&mdash;Sponge or Expanded Rubber"
2014,ASTM,"D4272-14 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop"
2014,ASTM,"D4272-14 Standard Test Method for  Total Energy Impact of Plastic Films By Dart Drop (Redline)"
2014,ASTM,"D5857-14 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2014,ASTM,"D6394-14 Standard Specification for  Sulfone Plastics &#40;SP&#41;"
2014,ASTM,"D5208-14 Standard Practice for  Fluorescent Ultraviolet &#40;UV&#41; Exposure of Photodegradable Plastics"
2014,ASTM,"D5208-14 Standard Practice for  Fluorescent Ultraviolet &#40;UV&#41; Exposure of Photodegradable Plastics (Redline)"
2014,ASTM,"D6261-14 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester &#40;TPES&#41;"
2014,ASTM,"D6261-14 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester &#40;TPES&#41; (Redline)"
2014,ASTM,"D2513-14 Standard Specification for  Polyethylene &#40;PE&#41; Gas Pressure Pipe, Tubing, and Fittings"
2012,ASTM,"F2080-12e1 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene &#40;PEX&#41; Pipe"
2014,ASTM,"D2513-14e1 Standard Specification for  Polyethylene &#40;PE&#41; Gas Pressure Pipe, Tubing, and Fittings"
2011,ASTM,"F2764/F2764M-11ae2 Standard Specification for  30 to 60 in. [750 to 1500 mm] Polypropylene &#40;PP&#41; Triple Wall   Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2013,ASTM,"D6117-13e1 Standard Test Methods for  Mechanical Fasteners in Plastic Lumber and Shapes"
2014,ASTM,"D955-08(2014) Standard Test Method of  Measuring Shrinkage from Mold Dimensions of Thermoplastics"
2014,ASTM,"D5989-14a Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon &#40;PA&#41;"
2014,ASTM,"C1147-14 Standard Practice for  Determining the Short Term Tensile Weld Strength of Chemical-Resistant  Thermoplastics"
2014,ASTM,"D5989-14 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon &#40;PA&#41;"
2014,ASTM,"D2665-14 Standard Specification for  Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Plastic Drain, Waste, and Vent Pipe   and Fittings"
2014,ASTM,"D1239-14 Standard Test Method for  Resistance of Plastic Films to Extraction by Chemicals"
2014,ASTM,"D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2014,ASTM,"F2880-14 Standard Specification for  Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe  in Nominal Pipe Sizes <fraction><num>3/4</den></fraction  > in. to 65 in."
2014,ASTM,"D2925-14 Standard Test Method for  Beam Deflection of &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced  Thermosetting Resin&#41; Pipe Under Full Bore Flow"
2014,ASTM,"D3678-14 Standard Specification for  Rigid Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Interior-Profile Extrusions"
2014,ASTM,"D1603-14 Standard Test Method for  Carbon Black Content in Olefin Plastics"
2014,ASTM,"D2925-14 Standard Test Method for  Beam Deflection of &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced  Thermosetting Resin&#41; Pipe Under Full Bore Flow (Redline)"
2014,ASTM,"F2968/F2968M-14 Standard Specification for Black Crosslinked Polyethylene &#40;PEX&#41; Pipe, Fittings and Joints  For Gas Distribution Applications"
2014,ASTM,"D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2014,ASTM,"D3035-14a Standard Specification for  Polyethylene &#40;PE&#41; Plastic Pipe &#40;DR-PR&#41; Based on Controlled   Outside Diameter"
2014,ASTM,"D2321-14 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2014,ASTM,"D2673-14 Standard Specification for  Oriented Polypropylene Film (Redline)"
2014,ASTM,"D3296-14a Standard Specification for  FEP-Fluorocarbon Tube"
2014,ASTM,"D3296-14a Standard Specification for  FEP-Fluorocarbon Tube (Redline)"
2013,ASTM,"D7611/D7611M-13e1 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2014,ASTM,"F2263-14 Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene &#40;PE&#41; Pipe   to Chlorinated Water (Redline)"
2014,ASTM,"D6341-14a Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F &#40;&ndash;34.4 and 60&deg;C&#41;"
2014,ASTM,"F449-02(2014) Standard Practice for  Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2014,ASTM,"D2321-14e1 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2014,ASTM,"D4877-14 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2014,ASTM,"D7486-14 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2014,ASTM,"F2649-14 Standard Specification for  Corrugated High Density Polyethylene &#40;HDPE&#41; Grease Interceptor  Tanks"
2014,ASTM,"F2649-14 Standard Specification for  Corrugated High Density Polyethylene &#40;HDPE&#41; Grease Interceptor  Tanks (Redline)"
2014,ASTM,"D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &#40;Vinyl  Chloride&#41; Plastics by Thermal Desorption&mdash;Gas Chromatography/Mass  Spectrometry"
2014,ASTM,"D5026-06(2014)e1 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Tension"
2014,ASTM,"D6867-03(2014) Standard Specification for  Perfluoroalkoxy &#40;PFA&#41;-Fluoropolymer Tubing"
2014,ASTM,"F1606-05(2014) Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  &#40;PE&#41; Liner"
2014,ASTM,"D3034-14a Standard Specification for  Type PSM Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Sewer Pipe and Fittings"
2014,ASTM,"D2680-01(2014) Standard Specification for  Acrylonitrile-Butadiene-Styrene &#40;ABS&#41; and Poly&#40;Vinyl Chloride&#41;   &#40;PVC&#41; Composite Sewer Piping"
2014,ASTM,"F481-97(2014) Standard Practice for  Installation of Thermoplastic Pipe and Corrugated Pipe in Septic  Tank Leach Fields"
2014,ASTM,"F794-03(2014) Standard Specification for  Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter"
2014,ASTM,"F2818-10(2014) Standard Specification for  Specification for Crosslinked Polyethylene &#40;PEX&#41; Material Gas   Pressure Pipe and Tubing"
2014,ASTM,"D5364-14 Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units (Redline)"
2014,ASTM,"F477-14 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe (Redline)"
2014,ASTM,"F2686-14 Standard Specification for  Glass Fiber Reinforced Thermoplastic Pipe (Redline)"
2013,ASTM,"F2736-13e1 Standard Specification for  6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single   Wall Pipe And Double Wall Pipe"
2014,ASTM,"D2846/D2846M-14 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2014,ASTM,"F1807-14a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"F2968/F2968M-14a Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints  For Gas Distribution Applications"
2014,ASTM,"D1929-14 Standard Test Method for  Determining Ignition Temperature of Plastics"
2014,ASTM,"D3420-14 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2014,ASTM,"D3763-14 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2014,ASTM,"D6341-14 Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F &#40;&ndash;34.4 and 60&deg;C&#41;"
2014,ASTM,"D5048-14 Standard Test Method for  Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2014,ASTM,"D5207-14 Standard Practice for  Confirmation of 20&ndash;mm &#40;50&ndash;W&#41; and 125&ndash;mm &#40;500&ndash;W&#41;  Test Flames for Small-Scale Burning Tests on Plastic Materials"
2014,ASTM,"F1807-14 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene &#40;PEX&#41; Tubing and SDR9 Polyethylene of Raised   Temperature &#40;PE-RT&#41; Tubing"
2014,ASTM,"F2159-14 Standard Specification for  Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene &#40;PEX&#41; Tubing and SDR9 Polyethylene of Raised   Temperature &#40;PE-RT&#41; Tubing"
2014,ASTM,"F2434-14 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene &#40;PEX&#41; Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene &#40;PEX-AL-PEX&#41; Tubing"
2014,ASTM,"D788-14 Standard Classification System for  Poly&#40;Methyl Methacrylate&#41; &#40;PMMA&#41; Molding and Extrusion Compounds"
2014,ASTM,"D2673-14 Standard Specification for  Oriented Polypropylene Film"
2014,ASTM,"D6778-14 Standard Classification System and Basis for Specification&#13; for  Polyoxymethylene Molding and Extrusion Materials &#40;POM&#41;"
2014,ASTM,"D7710-14 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly  Shaped Molded Cellular Materials"
2014,ASTM,"F2263-14 Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene &#40;PE&#41; Pipe   to Chlorinated Water"
2014,ASTM,"F2897-14 Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components &#40;Pipe, Tubing, Fittings, Valves, and Appurtenances&#41;"
2014,ASTM,"D2222-14 Standard Test Method for  Methanol Extract of Vinyl Chloride Resins"
2014,ASTM,"D3596-14 Standard Practice for  Determination of Gels &#40;Fisheyes&#41; In General-Purpose Poly&#40;Vinyl  Chloride&#41; &#40;PVC&#41; Resins"
2014,ASTM,"D4745-14 Standard Classification System and Basis for Specification&#13; for Filled Polytetrafluoroethlyene &#40;PTFE&#41; Molding and Extrusion  Materials Using ASTM Methods"
2014,ASTM,"F1960-14 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene &#40;PEX&#41; Tubing"
2014,ASTM,"D1243-14 Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers"
2014,ASTM,"D1790-14 Standard Test Method for  Brittleness Temperature of Plastic Sheeting by Impact"
2014,ASTM,"F3034-14 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene &#40;HDPE&#41;"
2014,ASTM,"D5364-14 Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units"
2014,ASTM,"D1599-14 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2014,ASTM,"D543-14 Standard Practices for  Evaluating the Resistance of Plastics to Chemical Reagents"
2014,ASTM,"D5155-14 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2014,ASTM,"F477-14 Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2014,ASTM,"F2686-14 Standard Specification for  Glass Fiber Reinforced Thermoplastic Pipe"
2014,ASTM,"D3350-14 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2014,ASTM,"D2683-14 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2014,ASTM,"F493-14 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2014,ASTM,"F758-14 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2014,ASTM,"D6100-14 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes &#40;POM&#41;"
2014,ASTM,"F1504-14 Standard Specification for  Folded Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Pipe for Existing Sewer and   Conduit Rehabilitation"
2014,ASTM,"F2618-09(2014) Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2014,ASTM,"D5419-14 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2014,ASTM,"D2732-14 Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting "
2014,ASTM,"D2732-14 Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting  (Redline)"
2014,ASTM,"D5491-08(2014) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding  and Extrusion Materials"
2014,ASTM,"D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials"
2014,ASTM,"D5419-14a Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2014,ASTM,"F2306/F2306M-14 Standard Specification for  12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2014,ASTM,"D1938-14 Standard Test Method for  Tear-Propagation Resistance (Trouser Tear) of Plastic Film  and Thin Sheeting by a Single-Tear Method"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials (Redline)"
2014,ASTM,"D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics  in a Horizontal Position"
2014,ASTM,"D5927-14 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2014,ASTM,"D746-14 Standard Test Method for  Brittleness Temperature of Plastics and Elastomers by Impact"
2014,ASTM,"D2661-14 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2014,ASTM,"D2609-14 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2014,ASTM,"F1960-14a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2014,ASTM,"F1429-99(2014) Standard Test Method for  Assembly Force of Plastic Underground Conduit Joints That Use  Flexible Elastomeric Seals Located in the Bell"
2014,ASTM,"D2672-14 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
2010,ASTM,"D5083-10e1 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2015,ASTM,"D4440-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2014,ASTM,"D3839-14 Standard Guide for  Underground Installation of &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber  Reinforced Thermosetting-Resin&#41; Pipe"
2015,ASTM,"F1545-15 Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2015,ASTM,"D3035-15 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2015,ASTM,"F1807-15 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2014,ASTM,"D1599-14e1 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2015,ASTM,"D3485-15 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC)"
2015,ASTM,"D789-15 Standard Test Methods for  Determination of Solution Viscosities of Polyamide (PA)"
2015,ASTM,"F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings"
2015,ASTM,"F667/F667M-15 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2015,ASTM,"F1960-15 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) Tubing"
2015,ASTM,"F3128-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent  Pipe with a Cellular Core"
2015,ASTM,"F1545-15a Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2015,ASTM,"F1545-15a Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Redline)"
2015,ASTM,"D2143-15 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe"
2015,ASTM,"D2996-15 Standard Specification for  Filament-Wound &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2015,ASTM,"D2997-15 Standard Specification for  Centrifugally Cast &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2015,ASTM,"D1562-15 Standard Classification System and Basis for Specification
 for  Cellulose Acetate Propionate Molding and Extrusion Compounds  (CAP)"
2015,ASTM,"D3418-15 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2015,ASTM,"D4894-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials "
2015,ASTM,"D4895-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2015,ASTM,"D4441-15 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2015,ASTM,"D1693-15 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
2015,ASTM,"D4024-15 Standard Specification for  Machine Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2015,ASTM,"D3222-05(2015) Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2015,ASTM,"D5421-15 Standard Specification for  Contact Molded &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2015,ASTM,"D1709-15 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2014,ASTM,"F2306/F2306M-14e1 Standard Specification for  12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2015,ASTM,"D2467-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
2015,ASTM,"F610/F610M-15 Standard Practice for  Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique"
2015,ASTM,"F1697-09(2015) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2015,ASTM,"F1698-02(2015) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2015,ASTM,"F2718-09(2015) Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated  Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation  of Water Pipelines"
2015,ASTM,"F2719-09(2015) Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar   Formed  in Place Lining System (FIPLS) for the Rehabilitation of  Water  Pipelines"
2015,ASTM,"F1735-09(2015) Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits"
2015,ASTM,"D3917-15 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2015,ASTM,"D3935-15 Standard Classification System and Basis for Specification
 for Polycarbonate (PC) Unfilled and Reinforced Material"
2015,ASTM,"F3123-15 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2015,ASTM,"D4726-15 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors"
2015,ASTM,"D4068-15 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2015,ASTM,"F679-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2015,ASTM,"F949-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2015,ASTM,"F3097-15 Standard Practice for Installation of an Outside Sewer Service Cleanout through a  Minimally Invasive Small Bore Vacuum Excavation"
2015,ASTM,"F2897-15 Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2015,ASTM,"F645-15 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2015,ASTM,"D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)"
2015,ASTM,"D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) (Redline)"
2015,ASTM,"D706-15 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)"
2015,ASTM,"D1922-15 Standard Test Method for  Propagation Tear Resistance of Plastic Film and Thin Sheeting  by Pendulum Method"
2015,ASTM,"D4889-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates "
2015,ASTM,"D4663-15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates "
2015,ASTM,"D3641-15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2015,ASTM,"D4321-15 Standard Test Method for  Package Yield of Plastic Film"
2015,ASTM,"D4321-15 Standard Test Method for  Package Yield of Plastic Film (Redline)"
2015,ASTM,"D1709-15a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2015,ASTM,"D4350-15 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2015,ASTM,"D5338-15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures"
2015,ASTM,"D5338-15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures (Redline)"
2015,ASTM,"D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2015,ASTM,"F412-15 Standard Terminology Relating to  Plastic Piping Systems"
2015,ASTM,"D2609-15 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2015,ASTM,"F437-15 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80"
2015,ASTM,"F438-15 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2015,ASTM,"D2466-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2015,ASTM,"D2464-15 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2015,ASTM,"F645-15a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2015,ASTM,"D5436-15 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2015,ASTM,"D5436-15 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes (Redline)"
2015,ASTM,"F2562/F2562M-15 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage"
2015,ASTM,"F2562/F2562M-15 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage (Redline)"
2015,ASTM,"D5024-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression"
2015,ASTM,"D5023-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending) "
2015,ASTM,"D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam)"
2015,ASTM,"D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2015,ASTM,"D5672/D5672M-15 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique"
2015,ASTM,"D3917-15e1 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2009,ASTM,"D2838-09e1 Standard Test Method for  Shrink Tension and Orientation Release Stress of Plastic Film  and Thin Sheeting"
2015,ASTM,"D3122-15 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2015,ASTM,"D1785-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2015,ASTM,"F656-15 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings"
2015,ASTM,"F2080-15 Standard Specification for  Cold-Expansion Fittings With Metal Compression-Sleeves for   Cross-Linked Polyethylene (PEX) Pipe"
2015,ASTM,"F2389-15 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2015,ASTM,"D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects"
2015,ASTM,"D2562-94(2015) Standard Practice for  Classifying Visual Defects in Parts Molded from Reinforced  Thermosetting Plastics"
2015,ASTM,"D2563-08(2015) Standard Practice for  Classifying Visual Defects in Glass-Reinforced Plastic Laminate  Parts"
2015,ASTM,"D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics"
2015,ASTM,"D1710-15 Standard Specification for  Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing  and Basic Shapes"
2015,ASTM,"D1710-15 Standard Specification for  Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing  and Basic Shapes (Redline)"
2015,ASTM,"D3294-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes"
2015,ASTM,"D3295-15 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2015,ASTM,"D4662-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2015,ASTM,"D695-15 Standard Test Method for Compressive Properties of Rigid Plastics"
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS) (Redline)"
2015,ASTM,"D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2015,ASTM,"D2684/D2684M-15 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents  or Proprietary Products"
2015,ASTM,"D2684/D2684M-15 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents  or Proprietary Products (Redline)"
2015,ASTM,"D3769-15 Standard Test Method for  Microcellular Urethanes&#x2014;High-Temperature Sag"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics (Redline)"
2015,ASTM,"D3159-15 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2015,ASTM,"D3763-15 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2015,ASTM,"F2435-15 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2015,ASTM,"F876-15 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2012,ASTM,"D5025-12e1 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2015,ASTM,"D7991-15 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions"
2015,ASTM,"D6360-15 Standard Practice for  Enclosed Carbon-Arc Exposures of Plastics"
2015,ASTM,"D6360-15 Standard Practice for  Enclosed Carbon-Arc Exposures of Plastics (Redline)"
2015,ASTM,"D6150-15 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility"
2015,ASTM,"D785-08(2015) Standard Test Method for  Rockwell Hardness of Plastics and Electrical Insulating Materials"
2013,ASTM,"D5575-07(2013) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2013,ASTM,"D1763-00(2013) Standard Specification for  Epoxy Resins"
2013,ASTM,"F2158-08(2013) Standard Specification for  Residential Central-Vacuum Tube and Fittings"
2013,ASTM,"F2600-09(2013) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2014,ASTM,"D2105-01(2014) Standard Test Method for  Longitudinal Tensile Properties of &ldquo;Fiberglass&rdquo;  &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41; Pipe and Tube"
2014,ASTM,"D3982-08(2014) Standard Specification for  Contact Molded &ldquo;Fiberglass&rdquo; &#40;Glass Fiber Reinforced  Thermosetting Resin&#41; Ducts"
2014,ASTM,"D6835-08(2014) Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  &#40;TEEE&#41;"
2014,ASTM,"D7471-09(2014) Standard Specification for  CPT-Fluoropolymer Molding and Extrusion Materials"
2014,ASTM,"D7472-09(2014) Standard Specification for  EFEP-Fluoropolymer Molding and Extrusion Materials"
2011,ASTM,"F2762-11e1 Standard Specification for  12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2013,ASTM,"F1973-13e1 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2012,ASTM,"F2947-12e1 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2013,ASTM,"F2922-13e1 Standard Specification for  Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers"
2012,ASTM,"D3035-12e2 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2012,ASTM,"D3261-12e1 Standard Specification for  Butt Heat Fusion Polyethylene &#40;PE&#41; Plastic Fittings for Polyethylene    &#40;PE&#41; Plastic Pipe and Tubing"
2010,ASTM,"D2683-10e2 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2012,ASTM,"D3681-12e1 Standard Test Method for  Chemical Resistance of &ldquo;Fiberglass&rdquo; &#40;Glass&ndash;Fiber&ndash;Reinforced  Thermosetting-Resin&#41; Pipe in a Deflected Condition"
2013,ASTM,"D2837-13e1 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2011,ASTM,"F2764/F2764M-11ae1 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications"
2013,ASTM,"D1929-13a Standard Test Method for  Determining Ignition Temperature of Plastics"
2013,ASTM,"D7486-08(2013)e1 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2013,ASTM,"F679-13a Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2010,ASTM,"D2683-10e3 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2014,ASTM,"F913-02(2014) Standard Specification for Thermoplastic Elastomeric Seals &#40;Gaskets&#41; for Joining<brk/> Plastic   Pipe"
2015,ASTM,"D7856-15 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2015,ASTM,"D5336-15 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2015,ASTM,"D2126-15 Standard Test Method for  Response of Rigid Cellular Plastics to Thermal and Humid Aging"
2015,ASTM,"D3576-15 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2010,ASTM,"D256-10e1 Standard Test Methods for  Determining the Izod Pendulum Impact Resistance of Plastics"
2015,ASTM,"D5336-15a Standard Classification System and Basis for Specification
 for Polyphthalamide (PPA) Injection Molding Materials"
2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems (Redline)"
2015,ASTM,"D7792/D7792M-15 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs"
2015,ASTM,"D7992/D7992M-15 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs"
2015,ASTM,"D3917-15a Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2015,ASTM,"D4396-15 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications"
2015,ASTM,"F2618-15 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2015,ASTM,"F441/F441M-15 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2015,ASTM,"F1417-11a(2015) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2015,ASTM,"F1588-96(2015) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2015,ASTM,"F2806-10(2015) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric  SDR-PR)"
2015,ASTM,"F1974-09(2015) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2015,ASTM,"F2881-11(2015) Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2015,ASTM,"D1243-15 Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers"
2015,ASTM,"D1755-15 Standard Specification for  Poly(Vinyl Chloride) Resins"
2015,ASTM,"D6263-15 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2015,ASTM,"D7082-15 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe"
2015,ASTM,"D5991-15 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2015,ASTM,"D6265-15 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2015,ASTM,"D6288-15 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2015,ASTM,"D4272/D4272M-15 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop"
2015,ASTM,"D1998-15 Standard Specification for  Polyethylene Upright Storage Tanks"
2015,ASTM,"F876-15a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2015,ASTM,"F2634-15 Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method"
2015,ASTM,"F2634-15 Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method (Redline)"
2015,ASTM,"F1803-15 Standard Specification for  Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and   Fittings Based on Controlled Inside Diameter&#x2009;"
2015,ASTM,"F1483-15 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2015,ASTM,"D7997-15 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations"
2015,ASTM,"D2657-07(2015) Standard Practice for  Heat Fusion Joining of Polyolefin Pipe and Fittings"
2015,ASTM,"F2136-08(2015) Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2015,ASTM,"F2509-15 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing"
2015,ASTM,"F2509-15 Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing (Redline)"
2015,ASTM,"F1336-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2015,ASTM,"F2897-15a Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2015,ASTM,"F3123-15a Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2015,ASTM,"D1598-15 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2015,ASTM,"D1598-15a Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2015,ASTM,"D7856-15a Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2015,ASTM,"D4218-15 Standard Test Method for  Determination of Carbon Black Content in Polyethylene Compounds  By the Muffle-Furnace Technique"
2015,ASTM,"D7990-15 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding"
2015,ASTM,"F2080-15a Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe"
2015,ASTM,"F1055-15 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2015,ASTM,"F2829/F2829M-15 Standard Specification for  Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe  Systems"
2015,ASTM,"D952-15 Standard Test Method for  Bond or Cohesive Strength of Sheet Plastics and Electrical  Insulating Materials"
2015,ASTM,"D952-15 Standard Test Method for  Bond or Cohesive Strength of Sheet Plastics and Electrical  Insulating Materials (Redline)"
2015,ASTM,"D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials"
2015,ASTM,"D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets"
2015,ASTM,"F2023-15 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water"
2015,ASTM,"F2788/F2788M-15 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2015,ASTM,"D4802-15 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2015,ASTM,"D2855-15 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets"
2014,ASTM,"D5155-14e1 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2015,ASTM,"D4968-15 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2015,ASTM,"D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials"
2015,ASTM,"C581-15 Standard Practice for  Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2015,ASTM,"D4167-15 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2015,ASTM,"D3261-15 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2015,ASTM,"D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials"
2016,ASTM,"D3311-11(2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2016,ASTM,"F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact   with Thermoplastic Pipe and Fittings Materials"
2015,ASTM,"F1948-15 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2015,ASTM,"F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing to Metal Insert and Plastic Insert Fittings"
2016,ASTM,"F667/F667M-16 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2016,ASTM,"F667/F667M-16 Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings (Redline)"
2015,ASTM,"D3034-15 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"F3181-16 Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS)  for HDPE Materials Containing Post- Consumer Recycled HDPE"
2016,ASTM,"D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings"
2016,ASTM,"D2852-16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings (Redline)"
2016,ASTM,"F1412-16 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2016,ASTM,"F3058-16 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for  Gravity Flow (Non-Pressure)  Sewer Lines"
2013,ASTM,"D7487-13e1 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2012,ASTM,"D883-12e1 Standard Terminology Relating to Plastics"
2016,ASTM,"F3033-16 Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing  an Inflatable Bladder for Resurfacing Manhole Walls of Various  Shapes  and Sizes<rangeref></rangeref  >"
2016,ASTM,"F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2016,ASTM,"F2786-16 Standard Practice for  Field Leak Testing of Polyethylene (PE) Pressure Piping Systems   Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)"
2016,ASTM,"F2786-16 Standard Practice for  Field Leak Testing of Polyethylene (PE) Pressure Piping Systems   Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing) (Redline)"
2016,ASTM,"D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the  Edgewise Position"
2016,ASTM,"D1824-16 Standard Test Method for  Apparent Viscosity of Plastisols and Organosols at Low Shear  Rates"
2016,ASTM,"D1824-16 Standard Test Method for  Apparent Viscosity of Plastisols and Organosols at Low Shear  Rates (Redline)"
2016,ASTM,"F2763-16 Standard Specification for  12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall  Polyethylene  (PE) Pipe and Fittings for Sanitary Sewer Applications"
2016,ASTM,"F2763-16 Standard Specification for  12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall  Polyethylene  (PE) Pipe and Fittings for Sanitary Sewer Applications (Redline)"
2016,ASTM,"D3914-02(2016) Standard Test Method for  In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic  Rod"
2016,ASTM,"D3916-08(2016) Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod"
2016,ASTM,"D4475-02(2016) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2012,ASTM,"F628-12e2 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2016,ASTM,"D4703-16 Standard Practice for  Compression Molding Thermoplastic Materials into Test Specimens,  Plaques, or Sheets"
2016,ASTM,"D4703-16 Standard Practice for  Compression Molding Thermoplastic Materials into Test Specimens,  Plaques, or Sheets (Redline)"
2016,ASTM,"D1203-16 Standard Test Methods for  Volatile Loss From Plastics Using Activated Carbon Methods"
2016,ASTM,"D3307-16 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) (Redline)"
2016,ASTM,"D4673-16 Standard Classification System for and Basis for Specification for Acrylonitrile&#x2013;Butadiene&#x2013;Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2016,ASTM,"D5138-16 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
2016,ASTM,"D2582-16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting"
2016,ASTM,"D4635-16 Standard Specification for  Plastic Films Made from Low-Density Polyethylene and Linear  Low-Density Polyethylene for General Use and Packaging Applications"
2016,ASTM,"D4635-16 Standard Specification for  Plastic Films Made from Low-Density Polyethylene and Linear  Low-Density Polyethylene for General Use and Packaging Applications (Redline)"
2016,ASTM,"D1786-16 Standard Specification for Toluene Diisocyanate"
2016,ASTM,"D4274-16 Standard Test Methods for Testing  Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2016,ASTM,"D4671-16 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols"
2016,ASTM,"D5629-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers"
2016,ASTM,"D6437-05(2016)e1 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols)"
2016,ASTM,"D3262-16 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe"
2016,ASTM,"D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between  &#x2212;30&#xb0;C and 30&#xb0;C with a Vitreous Silica Dilatometer"
2016,ASTM,"D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between  &#x2212;30&#xb0;C and 30&#xb0;C with a Vitreous Silica Dilatometer (Redline)"
2016,ASTM,"D5870-16 Standard Practice for  Calculating Property Retention Index of Plastics"
2016,ASTM,"D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2016,ASTM,"D4000-16 Standard Classification System for Specifying Plastic Materials"
2016,ASTM,"D6341-16 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &#x2013;30 and  140&#xb0;F (&#x2013;34.4 and 60&#xb0;C)"
2016,ASTM,"D2911/D2911M-16 Standard Specification for  Dimensions and Tolerances for Plastic Bottles"
2016,ASTM,"D2911/D2911M-16 Standard Specification for  Dimensions and Tolerances for Plastic Bottles (Redline)"
2016,ASTM,"D1929-16 Standard Test Method for  Determining Ignition Temperature of Plastics"
2014,ASTM,"D4101-14e1 Standard Specification for Polypropylene Injection and Extrusion Materials"
2015,ASTM,"D3034-15e1 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"F3190-16 Standard Practice for  Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene  (PE) and Polyamide (PA) Pipe and Fittings"
2016,ASTM,"F2599-16 Standard Practice for  The Sectional Repair of Damaged Pipe By Means of An Inverted   Cured-In-Place Liner"
2015,ASTM,"F1802-15 Standard Test Method for  Performance Testing of Excess Flow Valves"
2016,ASTM,"D2659-16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2016,ASTM,"D2659-16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers (Redline)"
2016,ASTM,"D8036-16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in  Pure MDI"
2016,ASTM,"D3981-09a(2016) Standard Specification for  Polyethylene Films Made from Medium-Density Polyethylene for  General Use and Packaging Applications"
2016,ASTM,"D4895-16 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2016,ASTM,"E1788-16 Standard Test Method for Acidity in Acrylonitrile"
2016,ASTM,"E1788-16 Standard Test Method for Acidity in Acrylonitrile (Redline)"
2016,ASTM,"D1621-16 Standard Test Method for  Compressive Properties of Rigid Cellular Plastics"
2016,ASTM,"D1621-16 Standard Test Method for  Compressive Properties of Rigid Cellular Plastics (Redline)"
2016,ASTM,"F2561-16 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2016,ASTM,"D7083-16 Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography"
2016,ASTM,"D7083-16 Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography (Redline)"
2016,ASTM,"D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl  Chloride) Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass  Spectrometry"
2016,ASTM,"D6777-16 Standard Test Method for  Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2016,ASTM,"D6777-16 Standard Test Method for  Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding (Redline)"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet (Redline)"
2016,ASTM,"D5260-16 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds"
2016,ASTM,"D4477-16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2016,ASTM,"D4226-16 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2016,ASTM,"D3675-16 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2016,ASTM,"D1709-16 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2016,ASTM,"D4495-16 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight"
2016,ASTM,"D5420-16 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact)"
2016,ASTM,"D2843-16 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2016,ASTM,"F1041-02(2016) Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2016,ASTM,"D1709-16a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2016,ASTM,"D3835-16 Standard Test Method for  Determination of Properties of Polymeric Materials by Means  of a Capillary Rheometer "
2016,ASTM,"D3835-16 Standard Test Method for  Determination of Properties of Polymeric Materials by Means  of a Capillary Rheometer  (Redline)"
2016,ASTM,"D1823-16 Standard Test Method for  Apparent Viscosity of Plastisols and Organosols at High Shear  Rates by Extrusion Viscometer"
2016,ASTM,"D1823-16 Standard Test Method for  Apparent Viscosity of Plastisols and Organosols at High Shear  Rates by Extrusion Viscometer (Redline)"
2016,ASTM,"F2735-09(2016) Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2016,ASTM,"F1741-08(2016) Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2016,ASTM,"F1743-08(2016) Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2016,ASTM,"D3841-16 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels"
2016,ASTM,"D6150-16 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility"
2016,ASTM,"D6150-16 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility (Redline)"
2016,ASTM,"F2418-16 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications (Redline)"
2016,ASTM,"D6779-16 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2016,ASTM,"F1760-16 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic   Pipe Having Reprocessed-Recycled Content"
2016,ASTM,"F3182-16 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines  for Potable Water"
2016,ASTM,"D6866-16 Standard Test Methods for  Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2016,ASTM,"F3183-16 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion  Joint"
2016,ASTM,"D6117-16 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2014,ASTM,"F2769-14 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2015,ASTM,"D2122-15 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2016,ASTM,"F2418-16a Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2016,ASTM,"F412-16 Standard Terminology Relating to  Plastic Piping Systems"
2016,ASTM,"F2854-10(2016) Standard Specification for  Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings   for Crosslinked Polyethylene (PEX) Tubing"
2016,ASTM,"F1473-16 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2016,ASTM,"F1216-16 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2016,ASTM,"F1901-16 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2016,ASTM,"F1668-16 Standard Guide for  Construction Procedures for Buried Plastic Pipe"
2016,ASTM,"F1668-16 Standard Guide for  Construction Procedures for Buried Plastic Pipe (Redline)"
2016,ASTM,"D6042-09(2016) Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC) "
2016,ASTM,"D5998-16 Standard Specification for  Molded Polyethylene Shipping and Storage Drums"
2016,ASTM,"D5998-16 Standard Specification for  Molded Polyethylene Shipping and Storage Drums (Redline)"
2016,ASTM,"D3965-16 Standard Classification System and Basis for Specifications for  Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings"
2016,ASTM,"D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to  Composition"
2016,ASTM,"D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to  Composition (Redline)"
2016,ASTM,"D2734-16 Standard Test Methods for  Void Content of Reinforced Plastics"
2016,ASTM,"D2291/D2291M-16 Standard Practice for  Fabrication of Ring Test Specimens for Glass-Resin Composites"
2016,ASTM,"D5740-16 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format"
2016,ASTM,"D5226-16 Standard Practice for  Dissolving Polymer Materials"
2016,ASTM,"D5930-16 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique"
2016,ASTM,"D7253-16 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols"
2016,ASTM,"D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids"
2016,ASTM,"D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate  (PC)"
2016,ASTM,"D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate  (PC) (Redline)"
2016,ASTM,"D4067-16 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2016,ASTM,"D788-16 Standard Classification System for  Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds"
2016,ASTM,"D788-16 Standard Classification System for  Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds (Redline)"
2016,ASTM,"D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature  by Means of a Torsion Test"
2016,ASTM,"D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature  by Means of a Torsion Test (Redline)"
2016,ASTM,"D2857-16 Standard Practice for Dilute Solution Viscosity of Polymers"
2016,ASTM,"F1055-16 Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2016,ASTM,"D8065/D8065M-16 Standard Classification System and Basis for Specification for Specifying Plastic Films"
2016,ASTM,"D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked  Ethylene Plastics"
2016,ASTM,"D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked  Ethylene Plastics (Redline)"
2016,ASTM,"F3203-16 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX)  Pipes and Tubing"
2016,ASTM,"F2764/F2764M-16 Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2016,ASTM,"D2116-16 Standard Specification for  FEP Resin Molding and Extrusion Materials"
2016,ASTM,"D2116-16 Standard Specification for  FEP Resin Molding and Extrusion Materials (Redline)"
2016,ASTM,"D5508-16 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC)"
2016,ASTM,"D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2016,ASTM,"D5205-16 Standard Classification System and Basis for Specification for  Polyetherimide (PEI) Materials"
2016,ASTM,"D5205-16 Standard Classification System and Basis for Specification for  Polyetherimide (PEI) Materials (Redline)"
2016,ASTM,"F2080-16 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2016,ASTM,"D5677-16 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2016,ASTM,"D3291-11(2016)e1 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression"
2016,ASTM,"D4801-08(2016) Standard Specification for  Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and  Greater"
2014,ASTM,"D4101-14e2 Standard Specification for Polypropylene Injection and Extrusion Materials"
2016,ASTM,"F1673-10(2016) Standard Specification for  Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2016,ASTM,"D4473-08(2016) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2016,ASTM,"C582-09(2016) Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment"
2016,ASTM,"D7793-16 Standard Specification for Insulated Vinyl Siding"
2016,ASTM,"D2176-16 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T.  Tester"
2016,ASTM,"D4204-16 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2016,ASTM,"D4204-16 Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study (Redline)"
2016,ASTM,"D4350-16 Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2016,ASTM,"D4350-16 Standard Test Method for  Corrosivity Index of Plastics and Fillers (Redline)"
2016,ASTM,"F1804-08(2016) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2016,ASTM,"F2769-16 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2016,ASTM,"F3123-16 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2016,ASTM,"D2122-16 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2016,ASTM,"D3261-16 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing"
2016,ASTM,"D3261-16 Standard Specification for  Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene    (PE) Plastic Pipe and Tubing (Redline)"
2016,ASTM,"D2235-04(2016) Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2016,ASTM,"D3138-04(2016) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2016,ASTM,"D2290-16 Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2016,ASTM,"F679-16 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2016,ASTM,"D3034-16 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2016,ASTM,"F2160-16 Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2016,ASTM,"F585-16 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2016,ASTM,"F585-16 Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers (Redline)"
2016,ASTM,"F2805-16 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections"
2016,ASTM,"F2805-16 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections (Redline)"
2016,ASTM,"D8033-16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials"
2016,ASTM,"D1430-11(2016) Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics"
2016,ASTM,"F412-16a Standard Terminology Relating to  Plastic Piping Systems"
2016,ASTM,"F1055-16a Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2016,ASTM,"F1055-16a Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing (Redline)"
2016,ASTM,"D3574-16 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams"
2016,ASTM,"D1248-16 Standard Specification for  Polyethylene Plastics Extrusion Materials for Wire and Cable"
2016,ASTM,"D1248-16 Standard Specification for  Polyethylene Plastics Extrusion Materials for Wire and Cable (Redline)"
2017,ASTM,"F2389-17 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2016,ASTM,"D2513-16 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2014,ASTM,"F2623-14 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing"
2014,ASTM,"F2206-14 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE)"
2014,ASTM,"F1488-14 Standard Specification for  Coextruded Composite Pipe"
2014,ASTM,"D638-14 Standard Test Method for  Tensile Properties of Plastics"
2015,ASTM,"F3034-15 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene (HDPE)"
2015,ASTM,"F3124-15e1 Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion  Joints in Plastic Piping Systems or Fittings"
2015,ASTM,"D2241-15 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2015,ASTM,"D7254-15 Standard Specification for  Polypropylene (PP) Siding"
2015,ASTM,"D5857-15 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2014,ASTM,"F2818-10(2014)e1 Standard Specification for  Specification for Crosslinked Polyethylene (PEX) Material Gas   Pressure Pipe and Tubing"
2016,ASTM,"F891-16 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core"
2017,ASTM,"D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending"
2017,ASTM,"F1807-17 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2017,ASTM,"F1743-17 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2017,ASTM,"F2135-01(2017) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2016,ASTM,"D2513-16a Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2017,ASTM,"F412-17 Standard Terminology Relating to  Plastic Piping Systems"
2017,ASTM,"F2389-17a Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2017,ASTM,"D1430-17 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting (Redline)"
2017,ASTM,"D6712-17 Standard Specification for  Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic  Shapes"
2017,ASTM,"D6712-17 Standard Specification for  Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic  Shapes (Redline)"
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols "
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols  (Redline)"
2017,ASTM,"D6779-17 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2017,ASTM,"D1667-17 Standard Specification for  Flexible Cellular Materials&#x2014;Poly (Vinyl Chloride) Foam  (Closed-Cell)"
2017,ASTM,"D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials  Based on ISO Test Methods"
2017,ASTM,"D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials  Based on ISO Test Methods (Redline)"
2017,ASTM,"D3489-17 Standard Test Methods for  Microcellular Urethane Materials"
2017,ASTM,"D5677-17 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2017,ASTM,"D5677-17 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines (Redline)"
2017,ASTM,"D5017-17 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance"
2017,ASTM,"D5017-17 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance (Redline)"
2017,ASTM,"D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers  of Ethylene and Ethylene&#x2013;Vinyl Acetate (EVA) Copolymers by  Gas Chromatography"
2017,ASTM,"D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers  of Ethylene and Ethylene&#x2013;Vinyl Acetate (EVA) Copolymers by  Gas Chromatography (Redline)"
2017,ASTM,"D6865-17 Standard Classification System and Basis for Specifications for  Acrylonitrile&#x2013;Styrene&#x2013;Acrylate (ASA) and Acrylonitrile&#x2013;EPDM&#x2013;Styrene  (AES) Plastics and Alloys Molding and Extrusion Materials"
2017,ASTM,"D6865-17 Standard Classification System and Basis for Specifications for  Acrylonitrile&#x2013;Styrene&#x2013;Acrylate (ASA) and Acrylonitrile&#x2013;EPDM&#x2013;Styrene  (AES) Plastics and Alloys Molding and Extrusion Materials (Redline)"
2017,ASTM,"D6868-17 Standard Specification for  Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens (Redline)"
2017,ASTM,"D2990-17 Standard Test Methods for  Tensile, Compressive, and Flexural Creep and Creep-Rupture  of Plastics "
2017,ASTM,"D2990-17 Standard Test Methods for  Tensile, Compressive, and Flexural Creep and Creep-Rupture  of Plastics  (Redline)"
2017,ASTM,"D6272-17 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending"
2017,ASTM,"D6272-17 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending (Redline)"
2017,ASTM,"D4068-17 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2017,ASTM,"D4068-17 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane (Redline)"
2017,ASTM,"D3574-17 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams"
2017,ASTM,"D3574-17 Standard Test Methods for  Flexible Cellular Materials&#x2014;Slab, Bonded, and Molded  Urethane Foams (Redline)"
2017,ASTM,"D6662-17 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2017,ASTM,"D7258-17 Standard Specification for Polymeric Piles"
2017,ASTM,"D7568-17 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
2017,ASTM,"F1282-17 Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2017,ASTM,"F2135-01(2017)e1 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2017,ASTM,"F1057-17 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2016,ASTM,"D1709-16ae1 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2017,ASTM,"F512-12(2017) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2017,ASTM,"F409-17 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2015,ASTM,"F1698-02(2015)e1 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2017,ASTM,"D7252-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates"
2017,ASTM,"F2764/F2764M-17 Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2017,ASTM,"D2561-17 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
2017,ASTM,"D2561-17 Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers (Redline)"
2017,ASTM,"D7436-17 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology"
2017,ASTM,"D7436-17 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology (Redline)"
2017,ASTM,"D7791-17 Standard Test Method for  Uniaxial Fatigue Properties of Plastics"
2017,ASTM,"D7774-17 Standard Test Method for  Flexural Fatigue Properties of Plastics"
2017,ASTM,"D5857-17 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2017,ASTM,"D5857-17 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology (Redline)"
2017,ASTM,"D5132-17 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2017,ASTM,"D732-17 Standard Test Method for  Shear Strength of Plastics by Punch Tool"
2017,ASTM,"D732-17 Standard Test Method for  Shear Strength of Plastics by Punch Tool (Redline)"
2017,ASTM,"D5946-17 Standard Test Method for  Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2017,ASTM,"D5946-17 Standard Test Method for  Corona-Treated Polymer Films Using Water Contact Angle Measurements (Redline)"
2017,ASTM,"D3675-17 Standard Test Method for  Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2017,ASTM,"D1623-17 Standard Test Method for  Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics"
2017,ASTM,"D1623-17 Standard Test Method for  Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics (Redline)"
2017,ASTM,"D1896/D1896M-10(2017) Standard Practice for  Transfer Molding Test Specimens of Thermosetting Compounds"
2017,ASTM,"D7254-17 Standard Specification for  Polypropylene (PP) Siding"
2017,ASTM,"D3679-17 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2017,ASTM,"D7793-17 Standard Specification for Insulated Vinyl Siding"
2017,ASTM,"D7445-17 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding)"
2017,ASTM,"D2846/D2846M-17 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials"
2017,ASTM,"D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials (Redline)"
2017,ASTM,"F412-17a Standard Terminology Relating to  Plastic Piping Systems"
2017,ASTM,"D2466-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2017,ASTM,"F1281-17 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2017,ASTM,"F438-17 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2017,ASTM,"D3368-17 Standard Specification for FEP Sheet and Film"
2017,ASTM,"D3368-17 Standard Specification for FEP Sheet and Film (Redline)"
2017,ASTM,"D2996-17 Standard Specification for  Filament-Wound &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2017,ASTM,"D5930-17 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique"
2017,ASTM,"D5930-17 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique (Redline)"
2017,ASTM,"D5492-17 Standard Test Method for  Determination of Xylene Solubles in Propylene Plastics"
2017,ASTM,"D5492-17 Standard Test Method for  Determination of Xylene Solubles in Propylene Plastics (Redline)"
2017,ASTM,"D2863-17 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index)"
2017,ASTM,"D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight"
2017,ASTM,"D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight (Redline)"
2017,ASTM,"D883-17 Standard Terminology Relating to Plastics"
2017,ASTM,"D7474-17 Standard Practice for  Determining Residual Stresses in Extruded or Molded Sulfone  Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2017,ASTM,"D7474-17 Standard Practice for  Determining Residual Stresses in Extruded or Molded Sulfone  Plastic (SP) Parts by Immersion in Various Chemical Reagents (Redline)"
2017,ASTM,"D1525-17 Standard Test Method for  Vicat Softening Temperature of Plastics"
2017,ASTM,"D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials"
2017,ASTM,"D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials (Redline)"
2017,ASTM,"D4968-17 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2017,ASTM,"F1675-13(2017) Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2017,ASTM,"F2764/F2764M-17e1 Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2017,ASTM,"D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2017,ASTM,"F1866-13(2017) Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2017,ASTM,"F2138-12(2017) Standard Specification for Excess Flow Valves for Natural Gas Service"
2017,ASTM,"F2390-12(2017) Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2017,ASTM,"F2737-11(2017) Standard Specification for  Corrugated High Density Polyethylene (HDPE) Water Quality Units"
2017,ASTM,"F2830-11(2017) Standard Specification for  Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe   With a Peelable Polypropylene (PP) Outer Layer"
2017,ASTM,"F2896-11(2017) Standard Specification for  Reinforced Polyethylene Composite Pipe For The Transport Of   Oil And Gas And Hazardous Liquids"
2017,ASTM,"F2946-12(2017) Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining  Plastic Pipe to Insitu Pipelines and Manholes"
2017,ASTM,"F2986-12(2017) Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate  Applications"
2017,ASTM,"D3308-12(2017) Standard Specification for  PTFE Resin Skived Tape"
2017,ASTM,"D2924-12(2017) Standard Test Method for External Pressure Resistance of &#x201c;Fiberglass&#x201d;<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis (Redline)"
2017,ASTM,"D7029-17 Standard Test Method for  Determination of Reactivity of Unsaturated Polyesters and Vinyl  Esters at 180.0&#xb0;F (82.2&#xb0;C)"
2017,ASTM,"D7029-17 Standard Test Method for  Determination of Reactivity of Unsaturated Polyesters and Vinyl  Esters at 180.0&#xb0;F (82.2&#xb0;C) (Redline)"
2017,ASTM,"D6338-17 Standard Classification System for  Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based  on ASTM Standard Test Methods"
2017,ASTM,"D6338-17 Standard Classification System for  Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based  on ASTM Standard Test Methods (Redline)"
2017,ASTM,"D1525-17e1 Standard Test Method for  Vicat Softening Temperature of Plastics"
2017,ASTM,"D5319-17 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2017,ASTM,"D7193-17 Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape"
2017,ASTM,"D7193-17 Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape (Redline)"
2017,ASTM,"D1895-17 Standard Test Methods for  Apparent Density, Bulk Factor, and Pourability of Plastic Materials"
2017,ASTM,"D1895-17 Standard Test Methods for  Apparent Density, Bulk Factor, and Pourability of Plastic Materials (Redline)"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric (Redline)"
2017,ASTM,"D6585-17 Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape"
2017,ASTM,"D6585-17 Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape (Redline)"
2017,ASTM,"D8136-17 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability  Using a Non-Contact Capacitance Thickness Gauge"
2017,ASTM,"F2176-17 Standard Specification for  Mechanical Couplings Used on Polyethylene Conduit, Duct and  Innerduct"
2017,ASTM,"F2176-17 Standard Specification for  Mechanical Couplings Used on Polyethylene Conduit, Duct and  Innerduct (Redline)"
2017,ASTM,"F1483-17 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2017,ASTM,"D2846/D2846M-17a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"F876-17 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2017,ASTM,"D3567-17 Standard Practice for Determining Dimensions of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings"
2017,ASTM,"D3567-17 Standard Practice for Determining Dimensions of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings (Redline)"
2017,ASTM,"D2115-17 Standard Practice for  Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
2017,ASTM,"D2729-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2017,ASTM,"F2487-13(2017) Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2017,ASTM,"F2831-12(2017) Standard Practice for   Internal Non Structural Epoxy Barrier Coating Material Used   In Rehabilitation of Metallic Pressurized Piping Systems"
2017,ASTM,"F2021-17 Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems"
2017,ASTM,"F2021-17 Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems (Redline)"
2017,ASTM,"F2536-17 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2017,ASTM,"F2536-17 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs (Redline)"
2017,ASTM,"D8133-17 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl  Chloride) Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass  Spectrometry"
2017,ASTM,"F1499-17 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2017,ASTM,"F3240-17 Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG)  for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main  and Lateral Pipelines"
2017,ASTM,"D3851-17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials"
2017,ASTM,"D3851-17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials (Redline)"
2017,ASTM,"D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2017,ASTM,"D4216-17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2017,ASTM,"D3030-17 Standard Test Method for  Volatile Matter (Including Water) of Vinyl Chloride Resins"
2017,ASTM,"D4551-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2017,ASTM,"D6110-17 Standard Test Method for  Determining the Charpy Impact Resistance of Notched Specimens  of Plastics"
2017,ASTM,"D5991-17 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2017,ASTM,"D6265-17 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2017,ASTM,"D6288-17 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2017,ASTM,"D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2017,ASTM,"D2152-17 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2017,ASTM,"F2561-17 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2017,ASTM,"D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2018,ASTM,"D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens  of Plastics"
2018,ASTM,"D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film  and Thin Sheeting"
2018,ASTM,"D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in  Soil"
2018,ASTM,"D1505-18 Standard Test Method for  Density of Plastics by the Density-Gradient Technique"
2018,ASTM,"D731-18 Standard Test Method for  Molding Index of Thermosetting Molding Powder"
2018,ASTM,"D3222-18 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell"
2018,ASTM,"D787-18 Standard Specification for  Ethyl Cellulose Molding and Extrusion Compounds"
2018,ASTM,"D4875-18 Standard Test Methods of  Polyurethane Raw Materials: Determination of the Polymerized  Ethylene Oxide Content of Polyether Polyols"
2018,ASTM,"D4273-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols"
2018,ASTM,"F2881/F2881M-18 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2018,ASTM,"F3308/F3308M-18 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene  (PE) Pipe for Non-Pressure Applications"
2018,ASTM,"D2992-18 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2014,ASTM,"F2985-14 Standard Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry  Size Sewers and Conduits"
2017,ASTM,"D5204-17 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2017,ASTM,"D2578-17 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films"
2017,ASTM,"D6691-17 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum"
2018,ASTM,"F2807-13(2018) Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure  Piping Applications"
2017,ASTM,"D2343-17 Standard Test Method for  Tensile Properties of Glass Fiber Strands, Yarns, and Rovings  Used in Reinforced Plastics"
2017,ASTM,"D6783-05a(2017) Standard Specification for  Polymer Concrete Pipe "
2017,ASTM,"D3591-17 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds"
2017,ASTM,"D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics  Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2017,ASTM,"D5422-17 Standard Test Method for  Measurement of Properties of Thermoplastic Materials by Screw-Extrusion  Capillary Rheometer"
2017,ASTM,"F3253-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for  Hot- and Cold-Water Hydronic Distribution Systems"
2017,ASTM,"D4101-17 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials"
2017,ASTM,"D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2017,ASTM,"D2863-17a Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index)"
2017,ASTM,"D6100-17 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes (POM)"
2017,ASTM,"D2846/D2846M-17b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2017,ASTM,"F2929-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and  Fittings for Radiant Heating Systems up to 75 psig"
2017,ASTM,"F2788/F2788M-17 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2017,ASTM,"D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending"
2017,ASTM,"D6262-17 Standard Specification for  Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK)"
2017,ASTM,"F2648/F2648M-17 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall   Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2017,ASTM,"F2510/F2510M-17 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes"
2017,ASTM,"F3219-17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single  Wall Pipe and Fittings"
2017,ASTM,"D2444-17 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2018,ASTM,"D2517-18 Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2017,ASTM,"D6287-17 Standard Practice for  Cutting Film and Sheeting Test Specimens"
2018,ASTM,"D1600-18 Standard Terminology for  Abbreviated Terms Relating to Plastics"
2018,ASTM,"F2136-18 Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe"
2018,ASTM,"D7445-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding)"
2014,ASTM,"D2661-14e1 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2015,ASTM,"D1785-15e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2014,ASTM,"F1488-14e1 Standard Specification for  Coextruded Composite Pipe"
2018,ASTM,"F2788/F2788M-18 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2017,ASTM,"D2846/D2846M-17be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2018,ASTM,"F1473-18 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2018,ASTM,"D5511-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  High-Solids Anaerobic-Digestion Conditions"
2018,ASTM,"D6954-18 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation"
2018,ASTM,"D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2018,ASTM,"F1973-13(2018) Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2018,ASTM,"F2145-13(2018) Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2018,ASTM,"F810-12(2018) Standard Specification for  Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste  Disposal Absorption Fields"
2018,ASTM,"F905-04(2018) Standard Practice for  Qualification of Polyethylene Saddle-Fused Joints"
2018,ASTM,"F1365-91(2018) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2018,ASTM,"F2600-09(2018) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2018,ASTM,"F1759-97(2018) Standard Practice for  Design of High-Density Polyethylene (HDPE) Manholes for Subsurface  Applications"
2018,ASTM,"F2787-13(2018) Standard Practice for  Structural Design of Thermoplastic Corrugated Wall Stormwater   Collection Chambers"
2018,ASTM,"F2922-13(2018) Standard Specification for  Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers"
2018,ASTM,"F1866-18 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2018,ASTM,"F1056-18 Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings"
2018,ASTM,"F645-18 Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"F645-18a Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"D4669-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols "
2018,ASTM,"D4672-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols "
2018,ASTM,"D5675-13(2018) Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2018,ASTM,"D5592-94(2018) Standard Guide for  Material Properties Needed in Engineering Design Using Plastics"
2018,ASTM,"F2767-18 Standard Specification for  Electrofusion Type Polyamide-12 Fittings for Outside Diameter   Controlled Polyamide-12 Pipe and Tubing for Gas Distribution"
2018,ASTM,"D4803-10(2018)e1 Standard Test Method for  Predicting Heat Buildup in PVC Building Products"
2018,ASTM,"D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials"
2018,ASTM,"F877-18 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2018,ASTM,"F2159-18 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"D4660-18 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate"
2018,ASTM,"D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the  Edgewise Position"
2018,ASTM,"D2321-18 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2018,ASTM,"D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low  Density Polyethylene Mixtures Using Infrared Spectrophotometry"
2018,ASTM,"D1601-18 Standard Test Method for  Dilute Solution Viscosity of Ethylene Polymers"
2018,ASTM,"D1601-18 Standard Test Method for  Dilute Solution Viscosity of Ethylene Polymers (Redline)"
2018,ASTM,"D5740-18 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format"
2018,ASTM,"D5740-18 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format (Redline)"
2018,ASTM,"D5628-18 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimens by Means  of a Falling Dart (Tup or Falling Mass)"
2018,ASTM,"D5628-18 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimens by Means  of a Falling Dart (Tup or Falling Mass) (Redline)"
2018,ASTM,"D4986-18 Standard Test Method for  Horizontal Burning Characteristics of Cellular Polymeric Materials"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer (Redline)"
2018,ASTM,"D3014-18 Standard Test Method for  Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2018,ASTM,"D6117-18 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2018,ASTM,"D6112-18 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2018,ASTM,"D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2018,ASTM,"D6108-18 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2018,ASTM,"F2785-18 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting"
2018,ASTM,"F2994-18 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP)  Impregnation Systems"
2018,ASTM,"F2994-18 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP)  Impregnation Systems (Redline)"
2018,ASTM,"F1697-18 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit"
2018,ASTM,"F1697-18 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound   Liner Pipe Rehabilitation of Existing Sewers and Conduit (Redline)"
2018,ASTM,"F1741-18 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2018,ASTM,"D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials  (TPC)"
2018,ASTM,"D2513-18 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F2987-12(2018) Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach  Aeration Applications"
2018,ASTM,"F2433-05(2018) Standard Test Method for  Determining Thermoplastic Pipe Wall Stiffness"
2018,ASTM,"D2412-11(2018) Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading"
2018,ASTM,"F3253-18 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for  Hot- and Cold-Water Hydronic Distribution Systems"
2018,ASTM,"F402-18 Standard Practice for  Safe Handling of Solvent Cements, Primers, and Cleaners Used   for Joining Thermoplastic Pipe and Fittings"
2018,ASTM,"F402-18 Standard Practice for  Safe Handling of Solvent Cements, Primers, and Cleaners Used   for Joining Thermoplastic Pipe and Fittings (Redline)"
2018,ASTM,"F2164-18 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2018,ASTM,"D570-98(2018) Standard Test Method for Water Absorption of Plastics"
2018,ASTM,"D5947-18 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens"
2018,ASTM,"D5947-18 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens (Redline)"
2018,ASTM,"D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin"
2018,ASTM,"D3222-18a Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2018,ASTM,"D7487-18 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2018,ASTM,"D7487-18 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test (Redline)"
2018,ASTM,"D6979-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen"
2018,ASTM,"D6979-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen (Redline)"
2018,ASTM,"D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2018,ASTM,"D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols (Redline)"
2018,ASTM,"D5575-18 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2018,ASTM,"D5575-18 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers (Redline)"
2018,ASTM,"D882-18 Standard Test Method for  Tensile Properties of Thin Plastic Sheeting"
2018,ASTM,"D882-18 Standard Test Method for  Tensile Properties of Thin Plastic Sheeting (Redline)"
2018,ASTM,"F2769-18 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2018,ASTM,"D3045-18 Standard Practice for  Heat Aging of Plastics Without Load"
2018,ASTM,"D3045-18 Standard Practice for  Heat Aging of Plastics Without Load (Redline)"
2018,ASTM,"D7444-18 Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics"
2018,ASTM,"D3299-18 Standard Specification for  Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2018,ASTM,"D3299-18 Standard Specification for  Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks (Redline)"
2018,ASTM,"D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2018,ASTM,"D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates"
2018,ASTM,"D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates (Redline)"
2018,ASTM,"D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay"
2018,ASTM,"D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay (Redline)"
2018,ASTM,"D5594-18 Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR)"
2018,ASTM,"D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2018,ASTM,"D4661-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2018,ASTM,"D3681-18 Standard Test Method for  Chemical Resistance of &#x201c;Fiberglass&#x201d; (Glass&#x2013;Fiber&#x2013;Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition"
2018,ASTM,"D5989-18 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2018,ASTM,"D5989-18 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA) (Redline)"
2018,ASTM,"D7292-18 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI)"
2018,ASTM,"D7292-18 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI) (Redline)"
2018,ASTM,"D2564-12(2018) Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
2018,ASTM,"F725-03(2018) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And  Fittings Standards"
2018,ASTM,"F2261-06(2018) Standard Test Method for  Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule  40 and 80 Socket-Type."
2018,ASTM,"F2657-07(2018) Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing"
2018,ASTM,"D5477-18 Standard Practice for  Identification of Polymer Layers or Inclusions by Fourier Transform  Infrared Microspectroscopy (FT-IR)"
2018,ASTM,"D5477-18 Standard Practice for  Identification of Polymer Layers or Inclusions by Fourier Transform  Infrared Microspectroscopy (FT-IR) (Redline)"
2018,ASTM,"F2928-18 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE)  Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods"
2018,ASTM,"F2928-18 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE)  Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods (Redline)"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials (Redline)"
2018,ASTM,"D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide  (PA) Solutions"
2018,ASTM,"D2513-18a Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F877-18a Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2018,ASTM,"F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl  Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and  Piping Components with Tapered Sockets"
2018,ASTM,"D4726-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors"
2018,ASTM,"D4726-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors (Redline)"
2018,ASTM,"D5814-18 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test"
2018,ASTM,"D1599-18 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings"
2018,ASTM,"D1599-18 Standard Test Method for  Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,   Tubing, and Fittings (Redline)"
2018,ASTM,"F1807-18 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"F3203-18 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX)  Pipes and Tubing"
2018,ASTM,"D4803-18 Standard Test Method for  Predicting Heat Buildup in PVC Building Products"
2018,ASTM,"D4803-18 Standard Test Method for  Predicting Heat Buildup in PVC Building Products (Redline)"
2018,ASTM,"E1863-18 Standard Test Method for  Analysis of Acrylonitrile by Gas Chromatography"
2018,ASTM,"D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens"
2018,ASTM,"D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens (Redline)"
2018,ASTM,"D5813-04(2018) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2018,ASTM,"D6068-10(2018) Standard Test Method for  Determining <emph type=""bdit"">J-R </emph>Curves of Plastic  Materials"
2018,ASTM,"D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins"
2018,ASTM,"D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins (Redline)"
2018,ASTM,"D5526-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  Accelerated Landfill Conditions"
2018,ASTM,"D5526-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  Accelerated Landfill Conditions (Redline)"
2018,ASTM,"D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2018,ASTM,"F2306/F2306M-18 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2018,ASTM,"D7444-18a Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics"
2018,ASTM,"D7444-18a Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics (Redline)"
2018,ASTM,"F2764/F2764M-18 Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2018,ASTM,"D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2018,ASTM,"D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry (Redline)"
2018,ASTM,"D6247-18 Standard Test Method for  Determination of Elemental Content of Polyolefins by Wavelength  Dispersive X-ray Fluorescence Spectrometry"
2018,ASTM,"D6247-18 Standard Test Method for  Determination of Elemental Content of Polyolefins by Wavelength  Dispersive X-ray Fluorescence Spectrometry (Redline)"
2018,ASTM,"D6290-18 Standard Test Method for  Color Determination of Plastic Pellets"
2018,ASTM,"F1960-18 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2018,ASTM,"D256-10(2018) Standard Test Methods for  Determining the Izod Pendulum Impact Resistance of Plastics"
2018,ASTM,"D7211-13(2018) Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2018,ASTM,"D3016-97(2018) Standard Practice for  Use of Liquid Exclusion Chromatography Terms and Relationships"
2018,ASTM,"F2785-18a Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F2945-18 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings"
2018,ASTM,"F2945-18 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings (Redline)"
2018,ASTM,"F1732-12(2018) Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing   Recycled PVC Material"
2018,ASTM,"D2647-18 Standard Specification for  Crosslinkable Ethylene Plastics"
2018,ASTM,"D2647-18 Standard Specification for  Crosslinkable Ethylene Plastics (Redline)"
2018,ASTM,"D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2018,ASTM,"D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials (Redline)"
2018,ASTM,"D4883-18 Standard Test Method for  Density of Polyethylene by the Ultrasound Technique"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion (Redline)"
2018,ASTM,"D6041-18 Standard Specification for  Contact-Molded &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2018,ASTM,"F2881/F2881M-18a Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2018,ASTM,"D7192-18 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2018,ASTM,"D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics  in a Horizontal Position"
2018,ASTM,"D883-18 Standard Terminology Relating to Plastics"
2018,ASTM,"D3763-18 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2018,ASTM,"D953-18 Standard Test Method for  Pin-Bearing Strength of Plastics"
2018,ASTM,"D5594-18a Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR)"
2018,ASTM,"D5594-18a Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR) (Redline)"
2018,ASTM,"D6953-18 Standard Test Method for  Determination of Antioxidants and Erucamide Slip Additives  in Polyethylene Using Liquid Chromatography (LC)"
2018,ASTM,"D6953-18 Standard Test Method for  Determination of Antioxidants and Erucamide Slip Additives  in Polyethylene Using Liquid Chromatography (LC) (Redline)"
2018,ASTM,"D7611/D7611M-18 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2018,ASTM,"D7823-18 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry"
2018,ASTM,"D8133-18 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass Spectrometry"
2018,ASTM,"D3826-18 Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test"
2018,ASTM,"D3826-18 Standard Practice for  Determining Degradation End Point in Degradable Polyethylene  and Polypropylene Using a Tensile Test (Redline)"
2018,ASTM,"F3123-18 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2018,ASTM,"F3123-18a Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2018,ASTM,"D883-18a Standard Terminology Relating to Plastics"
2012,ASTM,"F628-12e3 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2018,ASTM,"D6040-18 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2018,ASTM,"D6040-18 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape (Redline)"
2018,ASTM,"D2538-18 Standard Practice for  Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque  Rheometer"
2018,ASTM,"D2538-18 Standard Practice for  Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque  Rheometer (Redline)"
2018,ASTM,"F1960-18a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2018,ASTM,"F1807-18a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"F2735-18 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2018,ASTM,"F2159-18a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised   Temperature (PE-RT) Tubing"
2018,ASTM,"F2080-18 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2018,ASTM,"F2434-18 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing"
2018,ASTM,"F3347-18 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2018,ASTM,"F3348-18 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2018,ASTM,"F1674-18 Standard Test Method for  Joint Restraint Products for Use with PVC Pipe"
2018,ASTM,"F1674-18 Standard Test Method for  Joint Restraint Products for Use with PVC Pipe (Redline)"
2018,ASTM,"D7191-18 Standard Test Method for  Determination of Moisture in Plastics by Relative Humidity  Sensor"
2018,ASTM,"D7191-18 Standard Test Method for  Determination of Moisture in Plastics by Relative Humidity  Sensor (Redline)"
2018,ASTM,"F3219-18 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single  Wall Pipe and Fittings"
2018,ASTM,"F2764/F2764M-18a Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2018,ASTM,"F645-18b Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems"
2018,ASTM,"F645-18b Standard Guide for  Selection, Design, and Installation of Thermoplastic Water-  Pressure Piping Systems (Redline)"
2018,ASTM,"D2949-18 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings"
2019,ASTM,"F412-19 Standard Terminology Relating to  Plastic Piping Systems"
2019,ASTM,"F2206-19 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE)"
2019,ASTM,"F2206-19 Standard Specification for  Fabricated Fittings of Butt-Fused Polyethylene (PE) (Redline)"
2019,ASTM,"F1290-19 Standard Practice for  Electrofusion Joining Polyolefin Pipe and Fittings"
2019,ASTM,"F1290-19 Standard Practice for  Electrofusion Joining Polyolefin Pipe and Fittings (Redline)"
2019,ASTM,"F2618-19 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2019,ASTM,"F2165-19 Standard Specification for Flexible Pre-Insulated Plastic Piping"
2019,ASTM,"F2165-19 Standard Specification for Flexible Pre-Insulated Plastic Piping (Redline)"
2019,ASTM,"D3801-19 Standard Test Method for  Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2019,ASTM,"D883-19 Standard Terminology Relating to Plastics"
2018,ASTM,"F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT)  to Metal Insert and Plastic Insert Fittings"
2018,ASTM,"F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene  (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT)  to Metal Insert and Plastic Insert Fittings (Redline)"
2019,ASTM,"F1734-19 Standard Practice for  Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off   Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe"
2019,ASTM,"D2290-19 Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2019,ASTM,"F1488-14(2019) Standard Specification for  Coextruded Composite Pipe"
2019,ASTM,"F2263-14(2019) Standard Test Method for  Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe   to Chlorinated Water"
2019,ASTM,"F2649-14(2019) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks"
2019,ASTM,"F2947/F2947M-19 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2019,ASTM,"D2846/D2846M-19 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2018,ASTM,"F1871-18 Standard Specification for  Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation"
2019,ASTM,"F2620-19 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2019,ASTM,"F3128-19 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent  Pipe with a Cellular Core"
2019,ASTM,"F2658-07(2019) Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer  Pipe and Fittings"
2019,ASTM,"F894-19 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe"
2019,ASTM,"F894-19 Standard Specification for  Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain  Pipe (Redline)"
2019,ASTM,"F1057-19 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2019,ASTM,"F2306/F2306M-19 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2019,ASTM,"F2985-14(2019) Standard Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry  Size Sewers and Conduits"
2019,ASTM,"F1970-19 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2019,ASTM,"F3219-19 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single  Wall Pipe and Fittings"
2019,ASTM,"F3219-19 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single  Wall Pipe and Fittings (Redline)"
2019,ASTM,"F3347-19 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2019,ASTM,"F3348-19 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2019,ASTM,"F1807-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F2159-19 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F3371-19 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent  Applications"
2019,ASTM,"F2881/F2881M-19 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2019,ASTM,"F3202-19 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated  Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping"
2019,ASTM,"D2846/D2846M-19a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems"
2019,ASTM,"D2846/D2846M-19a Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water   Distribution Systems (Redline)"
2019,ASTM,"F2855-19 Standard Specification for  Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl   Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing"
2019,ASTM,"F2855-19 Standard Specification for  Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl   Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing (Redline)"
2019,ASTM,"F2817-13(2019) Standard Specification for  Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings   For Maintenance or Repair"
2019,ASTM,"F2788/F2788M-19 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2019,ASTM,"F2764/F2764M-19 Standard Specification for  6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated  Double and Triple Wall  Pipe and Fittings for Non-Pressure Sanitary  Sewer Applications"
2019,ASTM,"D4674-19 Standard Practice for  Accelerated Testing for Color Stability of Plastics Exposed  to Indoor Office Environments"
2019,ASTM,"D2222-19 Standard Test Method for  Methanol Extract of Vinyl Chloride Resins"
2019,ASTM,"D2222-19 Standard Test Method for  Methanol Extract of Vinyl Chloride Resins (Redline)"
2019,ASTM,"D6339-11(2019) Standard Classification System for and Basis for Specifications for  Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2019,ASTM,"D4161-14(2019) Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Joints Using Flexible Elastomeric Seals"
2019,ASTM,"D3748-14(2019) Standard Practice for  Evaluating High-Density Rigid Cellular Plastics"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography (Redline)"
2019,ASTM,"D5577-19 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled  Plastics"
2019,ASTM,"D3012-19 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven"
2019,ASTM,"D3012-19 Standard Test Method for  Thermal-Oxidative Stability of Polypropylene Using a Specimen  Rotator Within an Oven (Redline)"
2019,ASTM,"D3596-19 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl  Chloride) (PVC) Resins"
2019,ASTM,"D3596-19 Standard Practice for  Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl  Chloride) (PVC) Resins (Redline)"
2019,ASTM,"D3749-19 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique"
2019,ASTM,"D3749-19 Standard Test Method for  Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins  by Gas Chromatographic Headspace Technique (Redline)"
2019,ASTM,"D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2019,ASTM,"D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam (Redline)"
2019,ASTM,"D1938-19 Standard Test Method for  Tear-Propagation Resistance (Trouser Tear) of Plastic Film  and Thin Sheeting by a Single-Tear Method"
2019,ASTM,"D1938-19 Standard Test Method for  Tear-Propagation Resistance (Trouser Tear) of Plastic Film  and Thin Sheeting by a Single-Tear Method (Redline)"
2019,ASTM,"F2623-19 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2019,ASTM,"D5685-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe Fittings"
2019,ASTM,"D5685-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe Fittings (Redline)"
2019,ASTM,"D6358-19 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods"
2019,ASTM,"D6358-19 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods (Redline)"
2019,ASTM,"D6109-19 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products"
2019,ASTM,"D6109-19 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products (Redline)"
2019,ASTM,"D883-19a Standard Terminology Relating to Plastics"
2019,ASTM,"D3364-99(2019) Standard Test Method for  Flow Rates for Poly(Vinyl Chloride) with Molecular Structural  Implications"
2019,ASTM,"D3419-12(2019) Standard Practice for  In-Line Screw-Injection Molding Test Specimens From Thermosetting  Compounds"
2019,ASTM,"D2842-19 Standard Test Method for  Water Absorption of Rigid Cellular Plastics"
2019,ASTM,"D2842-19 Standard Test Method for  Water Absorption of Rigid Cellular Plastics (Redline)"
2019,ASTM,"D4968-19 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D3595-14(2019) Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film"
2019,ASTM,"D6289-13(2019) Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics"
2019,ASTM,"D3296-14a(2019) Standard Specification for  FEP-Fluorocarbon Tube"
2019,ASTM,"F2831-19 Standard Practice for   Internal Non Structural Epoxy Barrier Coating Material Used   In Rehabilitation of Metallic Pressurized Piping Systems"
2019,ASTM,"F2831-19 Standard Practice for   Internal Non Structural Epoxy Barrier Coating Material Used   In Rehabilitation of Metallic Pressurized Piping Systems (Redline)"
2019,ASTM,"D5364-14(2019) Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units"
2019,ASTM,"D4804-19 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2019,ASTM,"D6108-19 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2019,ASTM,"D6108-19 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes (Redline)"
2019,ASTM,"D6400-19 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2019,ASTM,"D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials"
2019,ASTM,"D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials (Redline)"
2019,ASTM,"D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials"
2019,ASTM,"D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials (Redline)"
2019,ASTM,"D5224-12(2019) Standard Practice for  Compression Molding Test Specimens of Thermosetting Molding  Compounds"
2019,ASTM,"D7611/D7611M-19 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods (Redline)"
2019,ASTM,"D4894-19 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials "
2019,ASTM,"D4894-19 Standard Specification for  Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion  Materials  (Redline)"
2019,ASTM,"F3346-19 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of  Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe"
2017,ASTM,"D4101-17e1 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials"
2019,ASTM,"D3895-19 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry"
2019,ASTM,"D3895-19 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry (Redline)"
2019,ASTM,"D3595-14(2019)e1 Standard Specification for  Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet  and Film"
2014,ASTM,"D4804-14 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2014,ASTM,"D3895-14 Standard Test Method for  Oxidative-Induction Time of Polyolefins by Differential Scanning  Calorimetry"
2019,ASTM,"D883-19b Standard Terminology Relating to Plastics"
2019,ASTM,"D6290-19 Standard Test Method for  Color Determination of Plastic Pellets"
2019,ASTM,"D6290-19 Standard Test Method for  Color Determination of Plastic Pellets (Redline)"
2019,ASTM,"F876-19 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2019,ASTM,"D7309-19 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2019,ASTM,"D6358-19e1 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods"
2019,ASTM,"F481-97(2019) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic  Tank Leach Fields"
2019,ASTM,"D5204-19 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2019,ASTM,"F1803-15(2019) Standard Specification for  Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and   Fittings Based on Controlled Inside Diameter&#x2009;"
2019,ASTM,"F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in  Pressurized Pipes"
2019,ASTM,"F2509-15(2019) Standard Specification for  Field-assembled Anodeless Riser Kits for Use on Outside Diameter   Controlled  Polyethylene and Polyamide-11 (PA11) Gas Distribution  Pipe and Tubing"
2019,ASTM,"F2207-06(2019) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2019,ASTM,"F876-19a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates "
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates  (Redline)"
2019,ASTM,"D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2019,ASTM,"D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement (Redline)"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics (Redline)"
2019,ASTM,"D3014-19 Standard Test Method for  Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2019,ASTM,"D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2019,ASTM,"D3517-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe"
2019,ASTM,"D3517-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe (Redline)"
2019,ASTM,"D2925-14(2019) Standard Test Method for  Beam Deflection of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe Under Full Bore Flow"
2019,ASTM,"D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2019,ASTM,"D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks (Redline)"
2019,ASTM,"D3840-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Fittings for Nonpressure Applications"
2019,ASTM,"D3840-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Fittings for Nonpressure Applications (Redline)"
2019,ASTM,"D3839-14(2019) Standard Guide for Underground Installation of &#x201c;Fiberglass&#x201d; (Glass-Fiber  Reinforced Thermosetting-Resin) Pipe"
2019,ASTM,"D7993-15(2019) Standard Guide for Analyzing Complex Phthalates"
2019,ASTM,"F1960-19 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2019,ASTM,"F3202-19a Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated  Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping"
2019,ASTM,"F3202-19a Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated  Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping (Redline)"
2019,ASTM,"D2513-19 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2019,ASTM,"D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2019,ASTM,"D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates (Redline)"
2019,ASTM,"F1924-19 Standard Specification for  Plastic Mechanical Fittings for Use on Outside Diameter Controlled   Polyethylene Gas Distribution Pipe and Tubing"
2019,ASTM,"F1924-19 Standard Specification for  Plastic Mechanical Fittings for Use on Outside Diameter Controlled   Polyethylene Gas Distribution Pipe and Tubing (Redline)"
2019,ASTM,"D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide  (PA) Solutions"
2019,ASTM,"D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide  (PA) Solutions (Redline)"
2019,ASTM,"F442/F442M-19 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&#x2013;PR)"
2019,ASTM,"F1025-19 Standard Guide for  Selection and Use of Full-Encirclement-Type Band Clamps for   Reinforcement or Repair of Punctures or Holes in Polyethylene Gas   Pressure Pipe"
2019,ASTM,"F1025-19 Standard Guide for  Selection and Use of Full-Encirclement-Type Band Clamps for   Reinforcement or Repair of Punctures or Holes in Polyethylene Gas   Pressure Pipe (Redline)"
2019,ASTM,"D7293-19 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI)"
2019,ASTM,"D7293-19 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI) (Redline)"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates (Redline)"
2019,ASTM,"D883-19c Standard Terminology Relating to Plastics"
2019,ASTM,"F2788/F2788M-19a Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2019,ASTM,"F758-14(2019) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2019,ASTM,"F2418-19 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2019,ASTM,"D2290-19a Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe"
2019,ASTM,"D2290-19a Standard Test Method for  Apparent Hoop Tensile Strength of Plastic or  Reinforced Plastic  Pipe (Redline)"
2019,ASTM,"F3308/F3308M-19 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene  (PE) Pipe for Non-Pressure Applications"
2019,ASTM,"F3308/F3308M-19 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene  (PE) Pipe for Non-Pressure Applications (Redline)"
2019,ASTM,"D2444-19 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2019,ASTM,"F2619/F2619M-19 Standard Specification for  High-Density Polyethylene (PE) Line Pipe"
2019,ASTM,"D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics"
2019,ASTM,"D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics (Redline)"
2019,ASTM,"D7194-19 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)"
2019,ASTM,"D7194-19 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) (Redline)"
2019,ASTM,"F2984-13(2019) Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL)  Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts,  and Conduits"
2019,ASTM,"F714-13(2019) Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2019,ASTM,"F2818-10(2019) Standard Specification for  Specification for Crosslinked Polyethylene (PEX) Material Gas   Pressure Pipe and Tubing"
2019,ASTM,"F1417-11a(2019) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2019,ASTM,"F949-15(2019) Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2019,ASTM,"D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the  Taber Abraser"
2019,ASTM,"D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the  Taber Abraser (Redline)"
2019,ASTM,"D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC)  Compounds Under Humid Conditions"
2019,ASTM,"D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC)  Compounds Under Humid Conditions (Redline)"
2019,ASTM,"D7192-19 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2019,ASTM,"F439-19 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80"
2019,ASTM,"F439-19 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,   Schedule 80 (Redline)"
2019,ASTM,"F1807-19a Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F2159-19a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2015,ASTM,"D7993-15 Standard Guide for Analyzing Complex Phthalates"
2019,ASTM,"D2843-19 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2019,ASTM,"D2863-19 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index)"
2014,ASTM,"D6713-14 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly&#40;Vinylidene  Fluoride&#41; &#40;PVDF&#41;"
2019,ASTM,"D6713-19 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF)"
2019,ASTM,"D6867-19 Standard Specification for  Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2019,ASTM,"D6867-19 Standard Specification for  Perfluoroalkoxy (PFA)-Fluoropolymer Tubing (Redline)"
2019,ASTM,"D6868-19 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2019,ASTM,"D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2019,ASTM,"D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics (Redline)"
2019,ASTM,"D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells"
2019,ASTM,"D494-11(2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products"
2019,ASTM,"D4066-13(2019) Standard Classification System for  Nylon Injection and Extrusion Materials (PA)"
2019,ASTM,"F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)"
2019,ASTM,"F3203-19 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX)  Pipes and Tubing"
2019,ASTM,"F3203-19 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX)  Pipes and Tubing (Redline)"
2019,ASTM,"D3124-98(2019) Standard Test Method for  Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry"
2019,ASTM,"D5748-95(2019) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film"
2019,ASTM,"F877-19 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2019,ASTM,"F1563-01(2019) Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2019,ASTM,"F3253-19 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for  Hot- and Cold-Water Hydronic Distribution Systems"
2019,ASTM,"F512-19 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"
2019,ASTM,"F512-19 Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation (Redline)"
2019,ASTM,"F1807-19b Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2019,ASTM,"F1960-19a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2019,ASTM,"F2080-19 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2019,ASTM,"F2389-19 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2019,ASTM,"F2434-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing"
2019,ASTM,"F2434-19 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9   Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked   Polyethylene (PEX-AL-PEX) Tubing (Redline)"
2019,ASTM,"F3240-19 Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG)  for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main  and Lateral Pipelines"
2019,ASTM,"F3240-19e1 Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG)  for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main  and Lateral Pipelines"
2019,ASTM,"D1593-19 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products (Redline)"
2019,ASTM,"F2562/F2562M-15(2019) Specification for  Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for  Non-Pressure   Drainage and Sewerage"
2019,ASTM,"D2105-01(2019) Standard Test Method for  Longitudinal Tensile Properties of &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2019,ASTM,"D3754-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer and Industrial Pressure Pipe"
2019,ASTM,"D3754-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer and Industrial Pressure Pipe (Redline)"
2019,ASTM,"F1606-19 Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  (PE) Liner"
2019,ASTM,"F1606-19 Standard Practice for  Rehabilitation of Existing Sewers and Conduits with Deformed  Polyethylene  (PE) Liner (Redline)"
2019,ASTM,"D953-19 Standard Test Method for  Pin-Bearing Strength of Plastics"
2019,ASTM,"D953-19 Standard Test Method for  Pin-Bearing Strength of Plastics (Redline)"
2019,ASTM,"D2287-19 Standard Classification System and Basis for Specification for  Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion  Compounds"
2019,ASTM,"D2287-19 Standard Classification System and Basis for Specification for  Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion  Compounds (Redline)"
2019,ASTM,"D4226-19 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2019,ASTM,"D4226-19 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products (Redline)"
2019,ASTM,"D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2019,ASTM,"D5296-19 Standard Test Method for  Molecular Weight Averages and Molecular Weight Distribution  of Polystyrene by High Performance Size-Exclusion Chromatography"
2019,ASTM,"D5296-19 Standard Test Method for  Molecular Weight Averages and Molecular Weight Distribution  of Polystyrene by High Performance Size-Exclusion Chromatography (Redline)"
2019,ASTM,"D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric   Seals"
2019,ASTM,"D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric   Seals (Redline)"
2019,ASTM,"D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2019,ASTM,"D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions (Redline)"
2020,ASTM,"D883-20 Standard Terminology Relating to Plastics"
2019,ASTM,"D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position"
2019,ASTM,"D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset  Cellular Plastics in a Vertical Position (Redline)"
2019,ASTM,"D4804-19a Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2019,ASTM,"D5206-19 Standard Test Method for  Windload Resistance of Rigid Plastic Siding"
2019,ASTM,"D5206-19 Standard Test Method for  Windload Resistance of Rigid Plastic Siding (Redline)"
2019,ASTM,"D7745-19 Standard Practice for  Testing Pultruded Composites"
2019,ASTM,"D7745-19 Standard Practice for  Testing Pultruded Composites (Redline)"
2019,ASTM,"D3801-19a Standard Test Method for  Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2019,ASTM,"D5132-19 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2019,ASTM,"D7309-19a Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2020,ASTM,"D7611/D7611M-20 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2020,ASTM,"D8280-20 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography"
2019,ASTM,"D1929-19 Standard Test Method for  Determining Ignition Temperature of Plastics"
2020,ASTM,"D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics"
2020,ASTM,"D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2019,ASTM,"F1948-19 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2020,ASTM,"F1948-20 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing"
2020,ASTM,"F1948-20 Standard Specification for  Metallic Mechanical Fittings for Use on Outside Diameter Controlled   Thermoplastic Gas Distribution Pipe and Tubing (Redline)"
2019,ASTM,"F2905/F2905M-19 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2019,ASTM,"F3347-19a Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2020,ASTM,"F3347-20 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2020,ASTM,"F3348-20 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing"
2018,ASTM,"D2517-18 Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings (Redline)"
2020,ASTM,"F877-20 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2020,ASTM,"F949-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings"
2020,ASTM,"F949-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth  Interior and Fittings (Redline)"
2020,ASTM,"F2019-20 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method"
2020,ASTM,"F3430-20 Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater  Collection Chambers"
2020,ASTM,"D7475-20 Standard Test Method for  Determining the Aerobic Degradation and Anaerobic Biodegradation  of Plastic Materials under Accelerated Bioreactor Landfill Conditions"
2020,ASTM,"D7475-20 Standard Test Method for  Determining the Aerobic Degradation and Anaerobic Biodegradation  of Plastic Materials under Accelerated Bioreactor Landfill Conditions (Redline)"
2020,ASTM,"D3212-07(2020) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2020,ASTM,"F2648/F2648M-20 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall   Polyethylene  (PE) Pipe and Fittings for Land Drainage Applications"
2020,ASTM,"C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2020,ASTM,"C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service (Redline)"
2020,ASTM,"D6778-20 Standard Classification System and Basis for Specification for  Polyoxymethylene Molding and Extrusion Materials (POM)"
2020,ASTM,"D6778-20 Standard Classification System and Basis for Specification for  Polyoxymethylene Molding and Extrusion Materials (POM) (Redline)"
2020,ASTM,"D7192-20 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2020,ASTM,"D7192-20 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors (Redline)"
2020,ASTM,"D543-20 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents"
2020,ASTM,"D5990-20 Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)"
2000,ASTM,"D5990-00 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)"
2020,ASTM,"D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers"
2020,ASTM,"D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers (Redline)"
2020,ASTM,"D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry (Redline)"
2020,ASTM,"D8133-20 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated  Poly(Vinyl Chloride) (CPVC) Compounds"
2020,ASTM,"D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated  Poly(Vinyl Chloride) (CPVC) Compounds (Redline)"
2020,ASTM,"D3262-20 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe"
2020,ASTM,"D3262-20 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe (Redline)"
2020,ASTM,"D883-20a Standard Terminology Relating to Plastics"
2020,ASTM,"F2829/F2829M-20 Standard Specification for  Metric- and Inch-Sized Fittings for Crosslinked Polyethylene  (PEX) Pipe"
2020,ASTM,"D1603-20 Standard Test Method for  Carbon Black Content in Olefin Plastics"
2020,ASTM,"D1603-20 Standard Test Method for  Carbon Black Content in Olefin Plastics (Redline)"
2020,ASTM,"D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2020,ASTM,"D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2020,ASTM,"D4986-20 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2020,ASTM,"D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D5132-20 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2020,ASTM,"D5132-20 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles (Redline)"
2020,ASTM,"D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds  by the Muffle-Furnace Technique"
2020,ASTM,"D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds  by the Muffle-Furnace Technique (Redline)"
2020,ASTM,"F2788/F2788M-20 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2020,ASTM,"F2561-20 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner"
2020,ASTM,"F2561-20 Standard Practice for  Rehabilitation of a Sewer Service Lateral and Its Connection   to the Main Using a One Piece Main and Lateral Cured-in-Place Liner (Redline)"
2020,ASTM,"F2599-20 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  >"
2020,ASTM,"F1760-16(2020) Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic   Pipe Having Reprocessed-Recycled Content"
2020,ASTM,"F1974-09(2020) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2020,ASTM,"D1203-20 Standard Test Methods for  Volatile Loss From Plastics Using Activated Carbon Methods"
2020,ASTM,"D1204-14(2020) Standard Test Method for  Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting  or Film at Elevated Temperature"
2020,ASTM,"D1922-15(2020) Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting  by Pendulum Method"
2020,ASTM,"D2732-14(2020) Standard Test Method for  Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and  Sheeting "
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates"
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates (Redline)"
2020,ASTM,"D5025-20 Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2020,ASTM,"D5025-20a Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials"
2020,ASTM,"D5025-20a Standard Specification for  Laboratory Burner Used for Small-Scale Burning Tests on Plastic  Materials (Redline)"
2020,ASTM,"F2968/F2968M-20 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications"
2020,ASTM,"F2968/F2968M-20a Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications"
2020,ASTM,"D2321-20 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications"
2020,ASTM,"D2321-20 Standard Practice for  Underground Installation of Thermoplastic Pipe for Sewers and   Other Gravity-Flow Applications (Redline)"
2020,ASTM,"F412-20 Standard Terminology Relating to  Plastic Piping Systems"
2020,ASTM,"F2905/F2905M-20 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2020,ASTM,"F2905/F2905M-20a Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2020,ASTM,"D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography"
2020,ASTM,"D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography (Redline)"
2020,ASTM,"D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer"
2020,ASTM,"D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting  Materials by Torque Rheometer (Redline)"
2020,ASTM,"D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2020,ASTM,"D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography (Redline)"
1993,ASTM,"D671-93 Standard Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002)"
1993,ASTM,"D673-93ae1 Test Method for Mar Resistance of Plastics (Withdrawn 1998)"
1995,ASTM,"D729-95 Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)"
1978,ASTM,"D756-78 Standard Practice for Determination Of Weight And Shape Changes Of Plastics Under Accelerated Service Conditions"
1993,ASTM,"D756-93 Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions (Withdrawn 1998)"
1993,ASTM,"D794-93 Practice for Determining Permanent Effect of Heat on Plastics (Withdrawn 1998)"
2017,ASTM,"D1042-12(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to  Heat and Moisture"
1995,ASTM,"D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion (Withdrawn 2004)"
1999,ASTM,"D1249-92(1999) Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers (Withdrawn 2007)"
1979,ASTM,"D1303-55(1979)e1 Standard Test Method for Total Chlorine In Vinyl Chloride Polymers And Copolymers"
1983,ASTM,"D1457-83 Standard Specification for PTFE Molding and Molding and Extrusion Materials"
1976,ASTM,"D1565-76 Standard Specification for Flexible Cellular Materials  - Vinyl Chloride Polymers And Copolymers ( Open-Cell Foam) "
1990,ASTM,"D1565-81(1990) Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Open-Cell Foam) (Withdrawn 1998)"
2014,ASTM,"D1622/D1622M-14 Standard Test Method for Apparent Density of Rigid Cellular Plastics"
2000,ASTM,"D1694-95(2000) Standard Specification for Threads 60&#176; (Stub) for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2005)"
2014,ASTM,"D1712-09(2014) Standard Practice for  Resistance of Plastics to Sulfide Staining"
2015,ASTM,"D1746-15 Standard Test Method for  Transparency of Plastic Sheeting"
1989,ASTM,"D1898-68(1989) Standard Practice for Sampling of Plastics (Withdrawn 1998)"
2003,ASTM,"D1996-97(2003) Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009)"
2015,ASTM,"D2103-15 Standard Specification for  Polyethylene Film and Sheeting"
2003,ASTM,"D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)"
1972,ASTM,"D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials"
2000,ASTM,"D2151-95(2000) Standard Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients (Withdrawn 2003)"
2007,ASTM,"D2176-97a(2007) Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester (Withdrawn 2010)"
1970,ASTM,"D2236-70 Standard Method Of Test For Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum"
1976,ASTM,"D2236-70(1976) Standard Test Method for Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum"
2005,ASTM,"D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007)"
2001,ASTM,"D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010)"
2003,ASTM,"D2447-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)"
2015,ASTM,"D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
1996,ASTM,"D2468-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)"
1999,ASTM,"D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (Withdrawn 2008)"
2016,ASTM,"D2565-16 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications"
1996,ASTM,"D2662-96a Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (Withdrawn 2003)"
1996,ASTM,"D2666-96a Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005)"
2016,ASTM,"D2839-16 Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene"
1999,ASTM,"D2873-94(1999)e1 Standard Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (Withdrawn 2003)"
2000,ASTM,"D2951-00 Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006)"
1995,ASTM,"D3000-95ae1 Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003)"
1995,ASTM,"D3015-95 Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (Withdrawn 2001)"
2017,ASTM,"D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds"
1992,ASTM,"D3309-92 Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems"
1992,ASTM,"D3309-92a Standard Specification for Polybutylene (PB) Plastic Hot-and Cold-Water Distribution Systems"
2002,ASTM,"D3309-96a(2002) Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)"
1993,ASTM,"D3351-93 Standard Test Method for Gel Count of Plastic Film (Withdrawn 2000)"
2015,ASTM,"D3354-15 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method"
2001,ASTM,"D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)"
2002,ASTM,"D3485-02 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable (Withdrawn 2011)"
1976,ASTM,"D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)"
1985,ASTM,"D3668-78(1985) Standard Test Method for Bearing Ratio of Laboratory Compacted Soil-Lime Mixtures (Withdrawn 1997)"
2016,ASTM,"D3768-16 Standard Test Method for  Microcellular Urethanes&#x2014;Flexural Recovery"
1991,ASTM,"D3770-91 Specification for Flexible Cellular Materials-High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Withdrawn 1998)"
1993,ASTM,"D3834-93 Test Method for Purity of Vinyl Chloride Monomer by Gas Chromatography (Withdrawn 1998)"
1989,ASTM,"D4099-89e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Prime Windows/Sliding Glass Doors"
1995,ASTM,"D4099-95 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)"
2004,ASTM,"D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)"
1992,ASTM,"D4202-92 Test Method for Thermal Stability of Poly(Vinyl Chloride) (PVC) Resin (Withdrawn 1998)"
2003,ASTM,"D4225-03 Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)"
2001,ASTM,"D4322-96(2001)e1 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010)"
1996,ASTM,"D4357-96 Standard Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics (Withdrawn 2004)"
2000,ASTM,"D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)"
1996,ASTM,"D4509-96 Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)"
1993,ASTM,"D4664-93 Test Method for Polyurethane Raw Materials: Determination of Freezing Point of Toluene Diisocyanate Mixtures (Withdrawn 1998)"
2015,ASTM,"D4756-15 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
1994,ASTM,"D4805-88(1994)e1 Standard Terminology for Plastics Standards (Withdrawn 2002)"
2001,ASTM,"D4923-01 Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010)"
2000,ASTM,"D5021-00 Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)"
1995,ASTM,"D5140-95 Standard Guide for Testing Polyurethane ""Poured in Place"" Thermal Break Materials (Withdrawn 2004)"
1991,ASTM,"D5152-91 Practice for Water Extraction of Residual Solids from Degraded Plastics for Toxicity Testing (Withdrawn 1998)"
1992,ASTM,"D5209-92 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)"
1992,ASTM,"D5247-92 Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004)"
2002,ASTM,"D5271-02 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011)"
1992,ASTM,"D5308-92 Methods of Testing Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications (Withdrawn 1998)"
1997,ASTM,"D5318-97 Standard Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates (Withdrawn 2004)"
1997,ASTM,"D5393-97 Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)"
1999,ASTM,"D5476-99 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)"
2001,ASTM,"D5510-94(2001) Standard Practice for Heat Aging of Oxidatively Degradable Plastics (Withdrawn 2010)"
2015,ASTM,"D5523-15 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2001,ASTM,"D5524-94(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009)"
1999,ASTM,"D5593-99e1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)"
1999,ASTM,"D5676-99 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)"
2001,ASTM,"D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) (Withdrawn 2009)"
2002,ASTM,"D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)"
1996,ASTM,"D5935-96 Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)"
1996,ASTM,"D5936-96 Specification for Multipurpose Test Specimens (Withdrawn 1998)"
1996,ASTM,"D5937-96 Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)"
1996,ASTM,"D5938-96 Standard Test Method for Determination of Tensile Properties (Withdrawn 1998)"
1996,ASTM,"D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials (Withdrawn 1998)"
1996,ASTM,"D5940-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials-Plates (Withdrawn 1998)"
1996,ASTM,"D5941-96 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)"
1996,ASTM,"D5942-96 Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)"
1996,ASTM,"D5943-96 Test Method for Determination of Flexural Properties (Withdrawn 1998)"
1996,ASTM,"D5944-96 Test Method for Determination of Temperature of Deflection Under Load (Withdrawn 1998)"
1996,ASTM,"D5945-96 Test Method for Determination of Temperature of Deflection Under Load for Plastics and Ebonite (Withdrawn 1998)"
2002,ASTM,"D5951-96(2002) Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing (Withdrawn 2011)"
2002,ASTM,"D6002-96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)"
1996,ASTM,"D6003-96 Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)"
1998,ASTM,"D6260-98 Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004)"
2017,ASTM,"D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2001,ASTM,"D6692-01 Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater (Withdrawn 2010)"
2002,ASTM,"D6776-02 Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment (Withdrawn 2011)"
2017,ASTM,"D6835-17 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE)"
2002,ASTM,"D6852-02 Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products (Withdrawn 2011)"
1995,ASTM,"F423-95 Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)"
1995,ASTM,"F491-95 Standard Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)"
1995,ASTM,"F492-95 Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
1995,ASTM,"F545-95 Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints (Withdrawn 2001)"
1995,ASTM,"F546-95 Standard Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)"
1995,ASTM,"F599-95 Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
2000,ASTM,"F699-00e1 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing (Withdrawn 2005)"
1995,ASTM,"F781-95 Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)"
1995,ASTM,"F789-95a Standard Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004)"
1996,ASTM,"F845-96 Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)"
1995,ASTM,"F892-95 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)"
2001,ASTM,"F1176-01e1 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi (Withdrawn 2010)"
2002,ASTM,"F1248-96(2002)e1 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe (Withdrawn 2007)"
2004,ASTM,"F1335-04 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)"
2002,ASTM,"F1380-95a(2002)e1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008)"
2001,ASTM,"F1474-98(2001) Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe (Withdrawn 2003)"
2001,ASTM,"F1589-95(2001) Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)"
2016,ASTM,"F2158-08(2016) Standard Specification for  Residential Central-Vacuum Tube and Fittings"
2003,ASTM,"F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)"
2004,ASTM,"F2330-04 Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water (Withdrawn 2010)"
2015,ASTM,"F3124-15 Standard Practice for Produce Heat Butt Fusion Joints in Plastic Piping Systems or  Fittings"
2001,ASTM,"PS106-01 Provisional Standard Specification for Rods and Tubes of Polyethylene (PE)"
2014,ASTM,"C1147-14 Standard Practice for  Determining the Short Term Tensile Weld Strength of Chemical-Resistant  Thermoplastics (Redline)"
2014,ASTM,"D1622/D1622M-14 Standard Test Method for Apparent Density of Rigid Cellular Plastics (Redline)"
2014,ASTM,"D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Redline)"
2015,ASTM,"D4756-15 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit (Redline)"
2016,ASTM,"D2839-16 Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene (Redline)"
2017,ASTM,"D2343-17 Standard Test Method for  Tensile Properties of Glass Fiber Strands, Yarns, and Rovings  Used in Reinforced Plastics (Redline)"
2017,ASTM,"D6691-17 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum (Redline)"
2017,ASTM,"D5422-17 Standard Test Method for  Measurement of Properties of Thermoplastic Materials by Screw-Extrusion  Capillary Rheometer (Redline)"
2017,ASTM,"D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics  Using the Karl Fischer Reaction (the Reaction of Iodine with Water) (Redline)"
2017,ASTM,"D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock (Redline)"
2017,ASTM,"D6100-17 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes (POM) (Redline)"
2017,ASTM,"F2929-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and  Fittings for Radiant Heating Systems up to 75 psig (Redline)"
2017,ASTM,"D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending (Redline)"
2017,ASTM,"D6287-17 Standard Practice for  Cutting Film and Sheeting Test Specimens (Redline)"
2018,ASTM,"D1600-18 Standard Terminology for  Abbreviated Terms Relating to Plastics (Redline)"
2018,ASTM,"F2136-18 Standard Test Method for  Notched, Constant Ligament-Stress (NCLS) Test to Determine  Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe (Redline)"
2018,ASTM,"D7445-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding) (Redline)"
2018,ASTM,"D5511-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  High-Solids Anaerobic-Digestion Conditions (Redline)"
2018,ASTM,"F1056-18 Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings (Redline)"
2018,ASTM,"D4669-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols  (Redline)"
2018,ASTM,"D4672-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Water Content  of Polyols  (Redline)"
2018,ASTM,"D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials (Redline)"
2018,ASTM,"D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the  Edgewise Position (Redline)"
2018,ASTM,"D1505-18 Standard Test Method for  Density of Plastics by the Density-Gradient Technique (Redline)"
2018,ASTM,"D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in  Soil (Redline)"
2018,ASTM,"D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens  of Plastics (Redline)"
2018,ASTM,"D787-18 Standard Specification for  Ethyl Cellulose Molding and Extrusion Compounds (Redline)"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell (Redline)"
2018,ASTM,"D4875-18 Standard Test Methods of  Polyurethane Raw Materials: Determination of the Polymerized  Ethylene Oxide Content of Polyether Polyols (Redline)"
2018,ASTM,"F2767-18 Standard Specification for  Electrofusion Type Polyamide-12 Fittings for Outside Diameter   Controlled Polyamide-12 Pipe and Tubing for Gas Distribution (Redline)"
2019,ASTM,"F1417-11A(2019)e1 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines  Using Low-Pressure Air"
2020,ASTM,"F449-20 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control"
2020,ASTM,"F449-20 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for   Agricultural Drainage or Water Table Control (Redline)"
2020,ASTM,"F3390-20 Standard Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe  for Land Drainage Applications"
2020,ASTM,"F2619/F2619M-20 Standard Specification for  High-Density Polyethylene (PE) Line Pipe"
2020,ASTM,"F2619/F2619M-20 Standard Specification for  High-Density Polyethylene (PE) Line Pipe (Redline)"
2020,ASTM,"D1712-09(2020) Standard Practice for  Resistance of Plastics to Sulfide Staining"
2020,ASTM,"D3892-15(2020) Standard Practice for Packaging/Packing of Plastics"
2017,ASTM,"D6272-17e1 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending"
2020,ASTM,"F3372-20 Standard Practice for Butt Fusion Joining of PA12 Pipe and Fittings"
2020,ASTM,"D1622-20 Standard Test Method for  Apparent Density of Rigid Cellular Plastics"
2020,ASTM,"D1622-20 Standard Test Method for  Apparent Density of Rigid Cellular Plastics (Redline)"
2020,ASTM,"D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)"
2020,ASTM,"D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) (Redline)"
2020,ASTM,"D7309-20 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2020,ASTM,"F1533-20 Standard Specification for  Deformed Polyethylene (PE) Liner"
2019,ASTM,"D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2015,ASTM,"D1693-15e1 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
2020,ASTM,"F493-20 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2020,ASTM,"D2665-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings"
2020,ASTM,"D2665-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe   and Fittings (Redline)"
2020,ASTM,"D2672-20 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
2020,ASTM,"D2672-20 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement (Redline)"
2020,ASTM,"D2467-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80"
2020,ASTM,"D2467-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  80 (Redline)"
2020,ASTM,"D2564-20 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems"
2020,ASTM,"D2564-20 Standard Specification for  Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping  Systems (Redline)"
2020,ASTM,"D2241-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)"
2020,ASTM,"D2241-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) (Redline)"
2020,ASTM,"D2855-20 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets"
2020,ASTM,"D2855-20 Standard Practice for  the Two-Step (Primer and Solvent  Cement) Method of Joining  Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)  Pipe and Piping  Components with Tapered Sockets (Redline)"
2020,ASTM,"F1041-20 Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing"
2020,ASTM,"F1041-20 Standard Guide for  Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing (Redline)"
2020,ASTM,"F441/F441M-20 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2020,ASTM,"F442/F442M-20 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR&#x2013;PR)"
2020,ASTM,"F3288/F3288M-20 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX)  Pressure Pipe"
2020,ASTM,"D7310-20 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors"
2020,ASTM,"D1238-20 Standard Test Method for  Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2020,ASTM,"D3453-20 Standard Specification for Flexible Cellular Materials&#x2014;Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications"
2020,ASTM,"D3453-20 Standard Specification for Flexible Cellular Materials&#x2014;Urethane for Furniture and  Automotive Cushioning, Bedding, and Similar Applications (Redline)"
2020,ASTM,"D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)"
2020,ASTM,"D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) (Redline)"
2020,ASTM,"F2720/F2720M-20 Standard Specification for  Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large   Diameter Pipe"
2020,ASTM,"F2947/F2947M-20 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols  (Redline)"
2020,ASTM,"D3159-20 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography (Redline)"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene (Redline)"
2020,ASTM,"D746-20 Standard Test Method for  Brittleness Temperature of Plastics and Elastomers by Impact"
2020,ASTM,"D746-20 Standard Test Method for  Brittleness Temperature of Plastics and Elastomers by Impact (Redline)"
2020,ASTM,"D2680-20 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride)   (PVC) Composite Sewer Piping"
2020,ASTM,"D2680-20 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride)   (PVC) Composite Sewer Piping (Redline)"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame (Redline)"
2020,ASTM,"D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position"
2020,ASTM,"D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid  Plastics in a Vertical Position (Redline)"
2020,ASTM,"D2774-20 Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2020,ASTM,"D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures"
2020,ASTM,"D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and  Report of Procedures (Redline)"
2020,ASTM,"D6394-20 Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2020,ASTM,"D7027-20 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine"
2020,ASTM,"D7027-20 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine (Redline)"
2020,ASTM,"F2806-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric  SDR-PR)"
2020,ASTM,"F876-20 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"F3373-20 Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter  Controlled Crosslinked Polyethylene (PEX) Pipe"
2020,ASTM,"F412-20a Standard Terminology Relating to  Plastic Piping Systems"
2020,ASTM,"D3769-20 Standard Test Method for Microcellular Urethanes&#x2014;High-Temperature Sag"
2020,ASTM,"D3769-20 Standard Test Method for Microcellular Urethanes&#x2014;High-Temperature Sag (Redline)"
2020,ASTM,"D7254-20 Standard Specification for  Polypropylene (PP) Siding"
2020,ASTM,"D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers  by Light Scattering"
2020,ASTM,"D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers  by Light Scattering (Redline)"
2020,ASTM,"F3348-20a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2020,ASTM,"D6779-20 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2020,ASTM,"F1804-08(2020) Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2020,ASTM,"F2969-12(2020) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure  Pipe"
2020,ASTM,"D1435-20 Standard Practice for Outdoor Weathering of Plastics"
2020,ASTM,"D1435-20 Standard Practice for Outdoor Weathering of Plastics (Redline)"
2020,ASTM,"D1056-20 Standard Specification for  Flexible Cellular Materials&#x2014;Sponge or Expanded Rubber"
2020,ASTM,"D1056-20 Standard Specification for  Flexible Cellular Materials&#x2014;Sponge or Expanded Rubber (Redline)"
2020,ASTM,"D2239-12a(2020) Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2020,ASTM,"F3347-20a Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2020,ASTM,"D6576-20 Standard Specification for  Flexible Cellular Rubber Chemically Blown"
2020,ASTM,"D6576-20 Standard Specification for  Flexible Cellular Rubber Chemically Blown (Redline)"
2020,ASTM,"D792-20 Standard Test Methods for  Density and Specific Gravity (Relative Density) of Plastics  by Displacement"
2020,ASTM,"D792-20 Standard Test Methods for  Density and Specific Gravity (Relative Density) of Plastics  by Displacement (Redline)"
2020,ASTM,"F1733-20 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing"
2020,ASTM,"F1733-20 Standard Specification for  Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA)   Plastic Pipe and Tubing (Redline)"
2020,ASTM,"F2735-20 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2020,ASTM,"F2159-20 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2020,ASTM,"F1498-08(2020) Standard Specification for  Taper Pipe Threads 60&#xb0; for Thermoplastic Pipe and Fittings"
2020,ASTM,"F1962-20 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2020,ASTM,"D2737-12a(2020) Standard Specification for  Polyethylene (PE) Plastic Tubing"
2020,ASTM,"F3034-15(2020) Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene (HDPE)"
2020,ASTM,"D2683-20 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing"
2020,ASTM,"D2683-20 Standard Specification for  Socket-Type Polyethylene Fittings for Outside Diameter-Controlled    Polyethylene Pipe and Tubing (Redline)"
2020,ASTM,"F1867-06(2020) Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation"
2020,ASTM,"F1871-20 Standard Specification for  Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation"
2020,ASTM,"F1871-20 Standard Specification for  Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing   Sewer and Conduit Rehabilitation (Redline)"
2020,ASTM,"F1336-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings"
2020,ASTM,"F1336-20 Standard Specification for  Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings (Redline)"
2020,ASTM,"F2306/F2306M-20 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer  and  Subsurface Drainage Applications"
2020,ASTM,"F2620-20 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2020,ASTM,"F2620-20 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings (Redline)"
2020,ASTM,"F1960-20 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2020,ASTM,"D704-99(2020) Standard Specification for Melamine-Formaldehyde Molding Compounds"
2020,ASTM,"D705-99(2020) Standard Specification for  Urea-Formaldehyde Molding Compounds"
2020,ASTM,"D4976-12a(2020) Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2020,ASTM,"D5436-15(2020) Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2020,ASTM,"D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2020,ASTM,"D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting"
2020,ASTM,"D3212-20 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2020,ASTM,"F3348-20b Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2020,ASTM,"D883-20b Standard Terminology Relating to Plastics"
2020,ASTM,"D2126-20 Standard Test Method for  Response of Rigid Cellular Plastics to Thermal and Humid Aging"
2020,ASTM,"D2126-20 Standard Test Method for  Response of Rigid Cellular Plastics to Thermal and Humid Aging (Redline)"
2020,ASTM,"D3222-20 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2020,ASTM,"D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics"
2020,ASTM,"D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics (Redline)"
2020,ASTM,"D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells"
2020,ASTM,"D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells (Redline)"
2020,ASTM,"D4000-20 Standard Classification System for Specifying Plastic Materials"
2020,ASTM,"D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames  for Small-Scale Burning Tests on Plastic Materials"
2020,ASTM,"D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames  for Small-Scale Burning Tests on Plastic Materials (Redline)"
2020,ASTM,"D7793-20 Standard Specification for Insulated Vinyl Siding"
2020,ASTM,"D2513-20 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings"
2020,ASTM,"D2513-20 Standard Specification for  Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings (Redline)"
2020,ASTM,"F2785-20 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2020,ASTM,"D2396-20 Standard Test Methods for  Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using  a Torque Rheometer"
2020,ASTM,"D2396-20 Standard Test Methods for  Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using  a Torque Rheometer (Redline)"
2020,ASTM,"D3295-20 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing"
2020,ASTM,"D3295-20 Standard Specification for  PTFE Tubing, Miniature Beading and Spiral Cut Tubing (Redline)"
2020,ASTM,"F876-20b Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"F876-20a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2021,ASTM,"D957-21 Standard Practice for  Determining Surface Temperature of Molds for Plastics"
2021,ASTM,"D957-21 Standard Practice for  Determining Surface Temperature of Molds for Plastics (Redline)"
2020,ASTM,"F2854-20 Standard Specification for  Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings   for Crosslinked Polyethylene (PEX) Tubing"
2020,ASTM,"F2854-20a Standard Specification for  Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings   for Crosslinked Polyethylene (PEX) Tubing"
2021,ASTM,"D4756-15(2021) Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
2021,ASTM,"D5338-15(2021) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures"
2021,ASTM,"D6394-21 Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates (Redline)"
2021,ASTM,"D5523-21 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2021,ASTM,"D5523-21 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates (Redline)"
2021,ASTM,"D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between –30 and  140°F (–34.4 and 60°C)"
2021,ASTM,"D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between –30 and  140°F (–34.4 and 60°C) (Redline)"
2021,ASTM,"D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2021,ASTM,"D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations"
2021,ASTM,"D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations (Redline)"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications (Redline)"
2021,ASTM,"D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force"
2021,ASTM,"D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied  Centrifugal Force (Redline)"
2021,ASTM,"D5226-21 Standard Practice for  Dissolving Polymer Materials"
2021,ASTM,"D5226-21 Standard Practice for  Dissolving Polymer Materials (Redline)"
2021,ASTM,"D5507-21 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2021,ASTM,"D1790-21 Standard Test Method for  Brittleness Temperature of Plastic Sheeting by Impact"
2021,ASTM,"D1790-21 Standard Test Method for  Brittleness Temperature of Plastic Sheeting by Impact (Redline)"
2021,ASTM,"D5420-21 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact)"
2021,ASTM,"D5420-21 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact) (Redline)"
2021,ASTM,"D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin  Copolymers by Infrared Spectrophotometry (FT-IR)"
2021,ASTM,"D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2021,ASTM,"D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities (Redline)"
2021,ASTM,"D8133-21 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D2672-20e1 Standard Specification for  Joints for IPS PVC Pipe Using Solvent Cement"
2021,ASTM,"F2786-16(2021) Standard Practice for  Field Leak Testing of Polyethylene (PE) Pressure Piping Systems   Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)"
1996,ASTM,"F1248-96 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe"
1990,ASTM,"D569-90 Method for Measuring the Flow Properties of Thermoplastic Molding Materials (Withdrawn 1995)"
1990,ASTM,"D637-90 Test Method for Surface Irregularities of Flat Transparent Plastic Sheets (Withdrawn 1995)"
1996,ASTM,"D638M-96 Standard Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998)"
1991,ASTM,"D695M-91 Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996)"
1977,ASTM,"D757-77 Method of Test for Incandescence Resistance of Rigid Plastics in a Horizontal Position (Withdrawn 1985)"
1990,ASTM,"D881-90 Test Method for Deviation of Line of Sight Through Transparent Plastics (Withdrawn 1995)"
1979,ASTM,"D1299-55(1979)E01 Test Method for Shrinkage of Molded and Laminated Thermosetting Plastics at Elevated Temperature (Withdrawn 1992)"
1977,ASTM,"D1433-77 Method of Rate of Burning and or Extent and Time of Burning of Flexible Thin Plastic Sheeting Supported on a 45-Deg Incline (Withdrawn 1986)"
1981,ASTM,"D1547-81 Specification for Extruded Acrylic Plastic Sheet (Withdrawn 1988)"
1992,ASTM,"D1705-92 Test Method for Particle Size Analysis of Powdered Polymers and Copolymers of Vinyl Chloride (Withdrawn 1998)"
1981,ASTM,"D1788-81 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)"
1993,ASTM,"D1822M-93 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials (Withdrawn 1996)"
1991,ASTM,"D1870-91 Practice for Elevated Temperature Aging Using a Tubular Oven (Withdrawn 1998)"
1994,ASTM,"D1939-94 Practice for Determining Residual Stresses in Extruded or Molded Acrylonitrile-Butadiene-Styrene (ABS) Parts by Immersion in Glacial Acetic Acid (Withdrawn 1999)"
1988,ASTM,"D2117-82(1988)e1 Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method (Withdrawn 1994)"
1981,ASTM,"D2123-81 Specification for Rigid Poly (Vinyl Chloride-Vinyl Acetate) Plastic Sheet (Withdrawn 1987)"
1981,ASTM,"D2133-81 Specification for Acetal Resin Injection Molding and Extrusion Materials (Withdrawn 1985)"
1984,ASTM,"D2289-84 Method of Test for Tensile Properties of Plastics at High Speeds (Withdrawn 1990)"
1985,ASTM,"D2292-85 Recommended Practice for Compression Molding Test Specimens of Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1992)"
1982,ASTM,"D2299-68(1982) Recommended Practice for Determining Relative Stain Resistance of Plastics (Withdrawn 1992)"
1981,ASTM,"D2341-81 Specification for Rigid Urethane Foam (Withdrawn 1988)"
1972,ASTM,"D2342-68(1972) Method of Test for Determination of Lot-to-Lot Stabilization Uniformity of Propylene Plastics (Withdrawn 1978)"
1986,ASTM,"D2393-86 Test Method for Viscosity of Epoxy Resins and Related Components"
1982,ASTM,"D2408-82 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)"
1982,ASTM,"D2410-82 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988)"
1981,ASTM,"D2530-81 Specification for Nonoriented Propylene Plastic Film (Withdrawn 1987)"
1980,ASTM,"D2560-80 Specification for Solvent Cements for Cellulose Acetate Butyrate (CAB) Plastic Pipe, Tubing, and Fittings (Withdrawn 1986)"
1984,ASTM,"D2660-84 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)"
1980,ASTM,"D2730-80 Method for Sag Flow of Highly Viscous Materials (Withdrawn 1986)"
1989,ASTM,"D2740-89 Specification for Polyvinyl Chloride (PVC) Plastic Tubing (Withdrawn 1989)"
1995,ASTM,"D2750-95 Specification for Acrylonitrile- Butadiene-Sytrene (ABS) Plastics Utilities Conduit and Fittings (Withdrawn 1997)"
1981,ASTM,"D2853-81 Specification for Reinforced Olefin Polymers for Injection Molding and Extrusion (Withdrawn 1987)"
1984,ASTM,"D2991-84 Recommended Practice for Testing Stress-Relaxation of Plastics (Withdrawn 1990)"
1995,ASTM,"D3028-95 Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids (Withdrawn 2000)"
1986,ASTM,"D3031-81(1986) Method of Test for Total Sulfur in Natural Gas (Hydrogenation) (Withdrawn 1990)"
1984,ASTM,"D3098-84 Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Plastic Laminates (Withdrawn 1988)"
1990,ASTM,"D3140-90 Standard Practice for Flaring Polyolefin Pipe and Tubing (Withdrawn 1999)"
1993,ASTM,"D3297-93 Practice for Molding and Machining Tolerances for PTFE Resin Parts (Withdrawn 1997)"
1975,ASTM,"D3421-75 Recommended Practice for Extraction and Determination of Plasticizer Mixtures from Vinyl Chloride Plastics (Withdrawn 1987)"
1980,ASTM,"D3435-80 Specification for Plastic Containers (Jerry Cans) for Petroleum Products (Withdrawn 1987)"
1990,ASTM,"D3490-80(1990) Specification for Flexible Cellular Materials-Bonded Urethane Foam (Withdrawn 1997)"
1977,ASTM,"D3592-77 Recommended Practice for Determining Molecular Weight by Vapor Pressure Osmometry (Withdrawn 1987)"
1987,ASTM,"D3615-87 Test Method for Chemical Resistance of Thermoset Molding Compouds Used in the Manufacture of Molded Fittings (Withdrawn 1993)"
1995,ASTM,"D3713-95 Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000)"
1985,ASTM,"D3750-79(1985) Practice for Determination of Number-Average Molecular Weight of Polymers by Membrane Osmometry (Withdrawn 1991)"
1988,ASTM,"D3894-88 Test Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (Withdrawn 1994)"
1981,ASTM,"D3998-81 Test Method for Pendulum-Impace Resistance of Extrusion Plastometer Extrudates (Withdrawn 1989)"
1994,ASTM,"D4019-94a Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002)"
1992,ASTM,"D4021-92 Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999)"
1989,ASTM,"D4100-82(1989)e1 Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials (Withdrawn 1997)"
1982,ASTM,"D4162-82 Specification for Reinforced Thermosetting Resin Sewer and Industrial Pressure Pipe (RTRP) (Withdrawn 1987)"
1993,ASTM,"D4973-93 Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999)"
1993,ASTM,"D5437-93 Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999)"
1996,ASTM,"D5509-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)"
1996,ASTM,"D5512-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)"
1994,ASTM,"D5525-94a Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)"
1995,ASTM,"D5686-95 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines (Withdrawn 2002)"
1986,ASTM,"E375-75 (1986) Definitions of Terms Relating to Resinography (Withdrawn 1992)"
1982,ASTM,"E858-82 Test Method for Birefringence in Fibers of Circular Cross Section by a Variable Compensator (Withdrawn 1989)"
1983,ASTM,"F600-78(1983) Practice for Nondestructive Ultrasonic Evaluation of Socket and Butt Joints of Thermoplastic Piping (Withdrawn 1989)"
1989,ASTM,"F800-89 Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992)"
1995,ASTM,"F878-95 Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)"
2021,ASTM,"D2837-21 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2021,ASTM,"D1004-21 Standard Test Method for  Tear Resistance (Graves Tear) of Plastic Film and Sheeting"
2021,ASTM,"D1004-21 Standard Test Method for  Tear Resistance (Graves Tear) of Plastic Film and Sheeting (Redline)"
2021,ASTM,"D2412-21 Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading"
2021,ASTM,"D2412-21 Standard Test Method for  Determination of External Loading Characteristics of Plastic   Pipe by Parallel-Plate Loading (Redline)"
2021,ASTM,"D2444-21 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight)"
2021,ASTM,"D2444-21 Standard Practice for  Determination of the Impact Resistance of Thermoplastic Pipe   and Fittings by Means of a Tup (Falling Weight) (Redline)"
2021,ASTM,"D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2021,ASTM,"D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics (Redline)"
2021,ASTM,"F714-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2021,ASTM,"D3675-21 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
1988,ASTM,"D647-88A Practice for Design of Molds for Test Specimens of Plastic Molding Materials (Withdrawn 1994)"
1981,ASTM,"D702-81 Specification for Cast Methacrylate Plastic Sheets, Rods, Tubes, and Shapes (Withdrawn 1988)"
1987,ASTM,"D796-87A Practice for Compression Molding Test Specimens of Phenolic Molding Compounds (Withdrawn 1992)"
1987,ASTM,"D956-87 Practice for Compression Molding Specimens of Amino Molding Compounds (Withdrawn 1992)"
1988,ASTM,"D958-88 Practice for Determining Temperatures of Standard ASTM Molds for Test Specimens of Plastics (Withdrawn 1995)"
1992,ASTM,"D1457-92 Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)"
1982,ASTM,"D2146-82 Specification for Propylene Plastic Molding and Extrusion Materials (Withdrawn 1985)"
1981,ASTM,"D2150-81 Specification for Woven Roving Glass Fabric for Polyester-Glass Laminates (Withdrawn 1986)"
1981,ASTM,"D2236-81 Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsienal Pendulum (Withdrawn 1984)"
1981,ASTM,"D3011-81 Specification for Reinforced and Filled Polystyrene, Styrene-Acrylonitrile, and ABS for Molding and Extrusion (Withdrawn 1987)"
1987,ASTM,"D3027-87 Practice for Compression Molding Specimens of Allyl Molding Compounds (Withdrawn 1992)"
1996,ASTM,"D3293-91a(1996) Specification for PTFE Resin Molded Sheet (Withdrawn 1997)"
1991,ASTM,"D3536-91 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquir Exclusion Chromatography (Gel Permeation Chromatography - GPC) (Withdrawn 1996)"
1982,ASTM,"D4184-82 Specification for Reinforced Thermosetting Resin (RTRP) Sewer Pipe (Withdrawn 1986)"
1994,ASTM,"D4205-93(1994)e1 Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)"
1987,ASTM,"D4665-87 Test Method For Polyurethane Raw Materials: Determination Of Assay Of Isocyanate S (Withdrawn 1992)"
1987,ASTM,"D4666-87E01 Test Method For Polyurethane Raw Materials: Determination Of Amine Equivalent Of Crude Or Modified Isocyanates (Withdrawn 1992)"
1998,ASTM,"D6314-98 Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)"
1982,ASTM,"F678-82 Specification for Polyethylene Gas Pressure Pipe, Tubing, and Fittings (Withdrawn 1989)"
1995,ASTM,"F809M-95 Specification for Large Diameter Polybutylene Plastic Pipe (Metric) (Withdrawn 1998)"
2021,ASTM,"F1947-21 Standard Practice for  Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits"
2021,ASTM,"F1504-14(2021)e1 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1504-14(2021) Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits"
2021,ASTM,"F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for  Rehabilitation of Existing Man-Entry Sewers and Conduits (Redline)"
2021,ASTM,"D2774-21 Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2021,ASTM,"D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open  System Aquarium Incubations"
2021,ASTM,"D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open  System Aquarium Incubations (Redline)"
2021,ASTM,"F585-16(2021) Standard Guide for  Insertion of Flexible Polyethylene Pipe Into Existing Sewers"
2021,ASTM,"F667/F667M-16(2021) Standard Specification for  3 through 24 in. Corrugated Polyethylene Pipe and Fittings"
2021,ASTM,"F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter"
2021,ASTM,"F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings   Based on Controlled Inside Diameter (Redline)"
2021,ASTM,"D2466-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2021,ASTM,"D2609-21 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe"
2021,ASTM,"D2609-21 Standard Specification for  Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe (Redline)"
2021,ASTM,"F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique"
2021,ASTM,"F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)   Plastic Pipe Fittings by the Heat Reversion Technique (Redline)"
2021,ASTM,"F656-21 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings"
2021,ASTM,"F656-21 Standard Specification for  Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride)   (PVC) Plastic Pipe and Fittings (Redline)"
2021,ASTM,"F2618-21 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems"
2021,ASTM,"F2618-21 Standard Specification for  Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings   for Chemical Waste Drainage Systems (Redline)"
2020,ASTM,"F2785-20e1 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2021,ASTM,"F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for  Gravity Flow (Non-Pressure)  Sewer Lines"
2021,ASTM,"F2947/F2947M-21 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2021,ASTM,"D2143-21 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe"
2021,ASTM,"D2143-21 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe (Redline)"
2021,ASTM,"D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2021,ASTM,"D3982-21 Standard Specification for  Contact Molded “Fiberglass” (Glass Fiber Reinforced  Thermosetting Resin) Ducts"
2021,ASTM,"D3982-21 Standard Specification for  Contact Molded “Fiberglass” (Glass Fiber Reinforced  Thermosetting Resin) Ducts (Redline)"
2021,ASTM,"F3506-21e1 Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene  of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based  on Inner Diameter (ID) for use in Air Conditioning and Refrigeration  Line Set Systems"
2021,ASTM,"F3506-21 Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene  of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based  on Inner Diameter (ID) for use in Air Conditioning and Refrigeration  Line Set Systems"
2021,ASTM,"D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding"
2021,ASTM,"D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding (Redline)"
2021,ASTM,"D8366-21 Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF"
2021,ASTM,"F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic   Pipe"
2021,ASTM,"F2657-21 Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing"
2021,ASTM,"F2657-21 Standard Test Method for  Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX)   Tubing (Redline)"
2021,ASTM,"F3190-21 Standard Practice for  Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene  (PE) and Polyamide (PA) Pipe and Fittings"
2021,ASTM,"F3190-21 Standard Practice for  Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene  (PE) and Polyamide (PA) Pipe and Fittings (Redline)"
2021,ASTM,"F714-21a Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2021,ASTM,"F2788/F2788M-21 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe"
2021,ASTM,"F2788/F2788M-21 Standard Specification for  Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe (Redline)"
2021,ASTM,"F2829/F2829M-21 Standard Specification for  Metric- and Inch-Sized Fittings for Crosslinked Polyethylene  (PEX) Pipe"
2021,ASTM,"F2829/F2829M-21 Standard Specification for  Metric- and Inch-Sized Fittings for Crosslinked Polyethylene  (PEX) Pipe (Redline)"
2021,ASTM,"F2968/F2968M-21 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications"
2021,ASTM,"F2968/F2968M-21 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications (Redline)"
2021,ASTM,"F3373-21 Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter  Controlled Crosslinked Polyethylene (PEX) Pipe"
2021,ASTM,"F3373-21 Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter  Controlled Crosslinked Polyethylene (PEX) Pipe (Redline)"
2021,ASTM,"D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2021,ASTM,"D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) (Redline)"
2021,ASTM,"F2159-21 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2021,ASTM,"F2735-21 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2021,ASTM,"D1203-21 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods"
2021,ASTM,"D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting"
2021,ASTM,"D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin  Sheeting (Redline)"
2021,ASTM,"D3420-21 Standard Test Method for  Pendulum Impact Resistance of Plastic Film"
2021,ASTM,"D3420-21 Standard Test Method for  Pendulum Impact Resistance of Plastic Film (Redline)"
2021,ASTM,"D3841-21 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels"
2021,ASTM,"D3841-21 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels (Redline)"
2021,ASTM,"D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2021,ASTM,"D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography (Redline)"
2021,ASTM,"D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe"
2021,ASTM,"D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe (Redline)"
2021,ASTM,"F1960-21 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2021,ASTM,"F2389-21 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2021,ASTM,"F2854-21 Standard Specification for  Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings   for Crosslinked Polyethylene (PEX) Tubing"
2021,ASTM,"F2854-21 Standard Specification for  Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings   for Crosslinked Polyethylene (PEX) Tubing (Redline)"
2021,ASTM,"F3348-21 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2021,ASTM,"F437-21 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80"
2021,ASTM,"F437-21 Standard Specification for  Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe  Fittings, Schedule 80 (Redline)"
2021,ASTM,"F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact   with Thermoplastic Pipe and Fittings Materials"
2021,ASTM,"D955-21 Standard Test Method of  Measuring Shrinkage from Mold Dimensions of Thermoplastics"
2021,ASTM,"D955-21 Standard Test Method of  Measuring Shrinkage from Mold Dimensions of Thermoplastics (Redline)"
2021,ASTM,"D1785-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2021,ASTM,"D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials"
2021,ASTM,"D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and  Extrusion Materials (Redline)"
2021,ASTM,"D7309-21 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D7309-21a Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D1003-21 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics"
2021,ASTM,"D1003-21 Standard Test Method for  Haze and Luminous Transmittance of Transparent Plastics (Redline)"
2021,ASTM,"D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics"
2021,ASTM,"D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics (Redline)"
2021,ASTM,"D2997-21 Standard Specification for  Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2021,ASTM,"D2997-21 Standard Specification for  Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe (Redline)"
2021,ASTM,"D1755-21 Standard Specification for  Poly(Vinyl Chloride) Resins"
2021,ASTM,"D1755-21 Standard Specification for  Poly(Vinyl Chloride) Resins (Redline)"
2021,ASTM,"F2881/F2881M-21 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2021,ASTM,"F2881/F2881M-21 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications (Redline)"
2021,ASTM,"F477-14(2021) Standard Specification for  Elastomeric Seals (Gaskets) for Joining Plastic Pipe"
2021,ASTM,"D1499-13(2021) Standard Practice for  Filtered Open-Flame Carbon-Arc Exposures of Plastics"
2021,ASTM,"D1763-00(2021) Standard Specification for  Epoxy Resins"
2021,ASTM,"D2116-16(2021) Standard Specification for  FEP Resin Molding and Extrusion Materials"
2021,ASTM,"D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T.  Tester"
2021,ASTM,"D3013-13(2021) Standard Specification for  Epoxy Molding Compounds"
2021,ASTM,"D4473-08(2021) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2021,ASTM,"D4549-15(2021) Standard Classification System and Basis for Specification for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2021,ASTM,"D6360-15(2021) Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2021,ASTM,"F2763/F2763M-16(2021)e1 Standard Specification for  12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall  Polyethylene  (PE) Pipe and Fittings for Sanitary Sewer Applications"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method (Redline)"
2021,ASTM,"D1786-21 Standard Specification for Toluene Diisocyanate"
2021,ASTM,"D1786-21 Standard Specification for Toluene Diisocyanate (Redline)"
2021,ASTM,"D4274-21 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics (Redline)"
2021,ASTM,"D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols"
2021,ASTM,"D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of  Polyols (Redline)"
2021,ASTM,"D6779-21 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2021,ASTM,"D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2021,ASTM,"D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space (Redline)"
2021,ASTM,"D3350-21 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials"
2021,ASTM,"D3350-21 Standard Specification for  Polyethylene Plastics Pipe and Fittings Materials (Redline)"
2021,ASTM,"D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography"
2021,ASTM,"D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography (Redline)"
2021,ASTM,"D618-21 Standard Practice for  Conditioning Plastics for Testing"
2021,ASTM,"D618-21 Standard Practice for  Conditioning Plastics for Testing (Redline)"
2021,ASTM,"D4819-13(2021)e1 Standard Specification for  Flexible Cellular Materials Made From Polyolefin Plastics"
2021,ASTM,"D5227-21 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins"
2021,ASTM,"D5227-21 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins (Redline)"
2021,ASTM,"F1804-21 Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation"
2021,ASTM,"F1804-21 Standard Practice for  Determining Allowable Tensile Load for Polyethylene (PE) Gas   Pipe During Pull-In Installation (Redline)"
2021,ASTM,"F2905/F2905M-21 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2021,ASTM,"F2905/F2905M-21a Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2021,ASTM,"F2785-21 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings"
2021,ASTM,"F2785-21 Standard Specification for  Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings (Redline)"
2021,ASTM,"F3033-16(2021) Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing  an Inflatable Bladder for Resurfacing Manhole Walls of Various  Shapes  and Sizes<rangeref></rangeref  >"
2021,ASTM,"F3097-15(2021) Standard Practice for Installation of an Outside Sewer Service Cleanout through a  Minimally Invasive Small Bore Vacuum Excavation"
2021,ASTM,"D5279-21 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion"
2021,ASTM,"D5279-21 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion (Redline)"
2021,ASTM,"F2929-17(2021) Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and  Fittings for Radiant Heating Systems up to 75 psig"
2021,ASTM,"F3507-21 Standard Practice for Butt-Fusion Joining of Crosslinkable Polyethylene (CX-PE) Pipe  and Tubing"
1995,ASTM,"F809/F809M-95e1 Standard Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2006)"
2021,ASTM,"D1636-21 Standard Specification for Allyl Molding Compounds"
2021,ASTM,"D1636-21 Standard Specification for Allyl Molding Compounds (Redline)"
2021,ASTM,"F2164-21 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure"
2021,ASTM,"F2164-21 Standard Practice for  Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene  (PEX) Pressure Piping Systems  Using Hydrostatic Pressure (Redline)"
2021,ASTM,"F2390-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content"
2021,ASTM,"F2390-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV)   Pipe  and Fittings Having Post-Industrial Recycle Content (Redline)"
2021,ASTM,"D1998-21 Standard Specification for  Polyethylene Upright Storage Tanks"
2021,ASTM,"D1998-21 Standard Specification for  Polyethylene Upright Storage Tanks (Redline)"
2021,ASTM,"F3347-21 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2021,ASTM,"F3348-21a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
1977,ASTM,"D568-77 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position"
1980,ASTM,"D1502-60(1980)e1 Method of Test for Transverse Load of Corrugated Reinforced Plastic Panels"
1974,ASTM,"D1638-74e1 Methods of Testing Urethane Foam Isocyanate Raw Materials"
1988,ASTM,"D1925-70(1988)e1 Test Method for Yellowness Index of Plastics"
1988,ASTM,"D1927-81(1988)e1 Specification for Rigid Poly (Vinyl Chloride) Plastic Sheet"
1997,ASTM,"D2176-97 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester"
1978,ASTM,"D2735-78 Practice for Determination of Effect of Cyclic Immersion of Syntactic Foam at Pressure"
1978,ASTM,"D2736-78 Practice for Determination of Hydrostatic Compressive Strength of Syntactic Foam"
1969,ASTM,"D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres"
1980,ASTM,"D2849-69(1980)e1 Methods of Testing Urethane Foam Polyol Raw Materials"
1981,ASTM,"D2948-81e1 Specification for Glass-Reinforced and Glass-Filled Acetal Resin Molding and Extrusion"
1987,ASTM,"D3010-87 Practice for Preparing Compression-Molded Test Sample Plaques of Rigid Poly(Vinyl Chloride) Compounds"
1978,ASTM,"D3100-78 Practice for Determination of Alkalinity of Hollow Glass Microspheres"
1978,ASTM,"D3101-78 Practice for Determination of Bulk Density and Packing Factor of Hollow Glass Microspheres"
1978,ASTM,"D3102-78 Practice for Determination of Isostatic Collapse Strength of Hollow Glass Microspheres"
1981,ASTM,"D3220-81e1 Specification for Reinforced Polyterephthalate Thermoplastic Molding and Extrusion Materials"
1986,ASTM,"D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration"
1987,ASTM,"D4098-82(1987)e1 Practice for Evaluating High-Density Rigid Cellular Thermosets"
1977,ASTM,"F443-77e1 Specification for Bell-End Chlorinated Poly(Vinyl Chloride) (CPVC) Pipe Schedule 40"
2021,ASTM,"D2239-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2021,ASTM,"D2737-21 Standard Specification for  Polyethylene (PE) Plastic Tubing"
2021,ASTM,"D3035-21 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2021,ASTM,"F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits"
2021,ASTM,"F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner  and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers  and Conduits (Redline)"
2021,ASTM,"F3508-21 Standard Guide for In-Situ Pipeline Re-Construction As Coupled Dual-Wall Composite  Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer  Tubular (SMPT)"
2021,ASTM,"F1504-21 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2021,ASTM,"F1504-21 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation (Redline)"
2021,ASTM,"F1947-21a Standard Practice for  Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits"
2021,ASTM,"F1947-21a Standard Practice for  Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into   Existing Sewers and Conduits (Redline)"
2021,ASTM,"F2737-11(2021) Standard Specification for  Corrugated High Density Polyethylene (HDPE) Water Quality Units"
2021,ASTM,"F3524/F3524M-21 Standard Specification for Polyamide-12 (PA12) Line Pipe"
1988,ASTM,"D621-64(1988)e1 Test Methods for Deformation of Plastics Under Load"
2021,ASTM,"D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials"
2021,ASTM,"D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion  and Coating Materials (Redline)"
2021,ASTM,"D3307-21 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials"
2021,ASTM,"D3307-21 Standard Specification for  Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials (Redline)"
2021,ASTM,"D3418-21 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry"
2021,ASTM,"D3418-21 Standard Test Method for  Transition Temperatures and Enthalpies of Fusion and Crystallization  of Polymers by Differential Scanning Calorimetry (Redline)"
2021,ASTM,"D3679-21 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2021,ASTM,"D3679-21 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding (Redline)"
2021,ASTM,"D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings"
2021,ASTM,"D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe  and Fittings (Redline)"
2021,ASTM,"D5419-21 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2021,ASTM,"D5419-21 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures (Redline)"
2021,ASTM,"D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors"
2021,ASTM,"D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors (Redline)"
2021,ASTM,"D952-15(2021) Standard Test Method for  Bond or Cohesive Strength of Sheet Plastics and Electrical  Insulating Materials"
2021,ASTM,"D5336-21 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2021,ASTM,"D2774-21a Standard Practice for  Underground Installation of Thermoplastic Pressure Piping"
2021,ASTM,"D2774-21a Standard Practice for  Underground Installation of Thermoplastic Pressure Piping (Redline)"
2021,ASTM,"D1785-21a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120"
2021,ASTM,"D1785-21a Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,   and 120 (Redline)"
2021,ASTM,"D1693-21 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics"
2021,ASTM,"D1693-21 Standard Test Method for  Environmental Stress-Cracking of Ethylene Plastics (Redline)"
2021,ASTM,"D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing  and Basic Shapes"
2021,ASTM,"D4167-21 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2021,ASTM,"D4167-21 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers (Redline)"
2021,ASTM,"D4477-21 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2021,ASTM,"D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids"
2021,ASTM,"D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids (Redline)"
1976,ASTM,"D1180-57(1976) Method of Test for Bursting Strength of Round Rigid Plastic Tubing"
1976,ASTM,"D2926-70(1976)e1 Method of Test for Bulk Modulus of Elasticity of Syntactic Foam (Piston-Cylinder Method)"
1978,ASTM,"D2446-73(1978)e1 Specification for Cellulose Acetate Butyrate (CAB) Plastic Pipe (SDR-PR) and Tubing"
2021,ASTM,"D6713-21 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF)"
2021,ASTM,"D6713-21 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF) (Redline)"
2021,ASTM,"D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF"
2021,ASTM,"D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF (Redline)"
2021,ASTM,"F1545-15a(2021) Standard Specification for  Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges"
2021,ASTM,"D7309-21b Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D7309-21b Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry (Redline)"
2021,ASTM,"F1281-17(2021)e1 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2021,ASTM,"F2881/F2881M-21e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall  Pipe and Fittings for Non-Pressure Storm Sewer Applications"
2021,ASTM,"F2946-12(2021) Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining  Plastic Pipe to Insitu Pipelines and Manholes"
2021,ASTM,"F1673-10(2021)e1 Standard Specification for  Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems"
2020,ASTM,"F2620-20ae1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2020,ASTM,"F2620-20a Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2021,ASTM,"D4092-21 Standard Terminology for  Plastics: Dynamic Mechanical Properties"
2021,ASTM,"D4092-21 Standard Terminology for  Plastics: Dynamic Mechanical Properties (Redline)"
2021,ASTM,"D1822-21 Standard Test Method for  Determining the Tensile-Impact Resistance of Plastics"
2021,ASTM,"D1822-21 Standard Test Method for  Determining the Tensile-Impact Resistance of Plastics (Redline)"
2021,ASTM,"D8349-21 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints  Between Different Materials for the Production of End Items or Parts  that are Intended to be Disassembled and/or Reassembled"
2021,ASTM,"D6988-21 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens"
2021,ASTM,"D6988-21 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens (Redline)"
2021,ASTM,"F3535-21 Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems  Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)"
2021,ASTM,"D2729-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2021,ASTM,"D2729-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Redline)"
2021,ASTM,"D1598-21 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2021,ASTM,"D2235-21 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2021,ASTM,"D2661-21 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings"
2021,ASTM,"D2661-21 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe and Fittings (Redline)"
2021,ASTM,"D3122-21 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings"
2021,ASTM,"D3122-21 Standard Specification for  Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings (Redline)"
2021,ASTM,"D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components"
2021,ASTM,"D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene   (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components (Redline)"
2021,ASTM,"D6248-21 Standard Test Method for  Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2021,ASTM,"F1057-21 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique"
2021,ASTM,"F1057-21 Standard Practice for  Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC)   Pipe by the Heat Reversion Technique (Redline)"
2021,ASTM,"D5071-06(2021) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2021,ASTM,"D5272-08(2021) Standard Practice for  Outdoor Exposure Testing of Photodegradable Plastics"
2021,ASTM,"D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents"
2021,ASTM,"D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents (Redline)"
2021,ASTM,"D3354-21 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method"
2021,ASTM,"D3354-21 Standard Test Method for  Blocking Load of Plastic Film by the Parallel Plate Method (Redline)"
2021,ASTM,"D7254-21 Standard Specification for  Polypropylene (PP) Siding"
2021,ASTM,"D7254-21 Standard Specification for  Polypropylene (PP) Siding (Redline)"
2021,ASTM,"D7793-21 Standard Specification for Insulated Vinyl Siding"
2021,ASTM,"D7793-21 Standard Specification for Insulated Vinyl Siding (Redline)"
2021,ASTM,"F3508-21a Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline  by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular  (SMPT)"
2021,ASTM,"F3508-21a Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline  by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular  (SMPT) (Redline)"
2021,ASTM,"F3525/F3525M-21 Standard Specification Fabricated Fittings of Crosslinkable Polyethylene (CX-PE)"
2021,ASTM,"D3311-17(2021) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2021,ASTM,"D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material"
2021,ASTM,"D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material (Redline)"
2021,ASTM,"D4067-21 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2021,ASTM,"D6400-21 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2021,ASTM,"F2634-15(2021) Standard Test Method for  Laboratory Testing of Polyethylene (PE) Butt Fusion Joints   using Tensile-Impact Method"
2021,ASTM,"D7210-21 Standard Practice for  Extraction of Additives in Polyolefin Plastics"
2021,ASTM,"D7210-21 Standard Practice for  Extraction of Additives in Polyolefin Plastics (Redline)"
2021,ASTM,"F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications"
2021,ASTM,"F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall  Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Redline)"
2021,ASTM,"D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2021,ASTM,"D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification (Redline)"
2021,ASTM,"F1743-21 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2021,ASTM,"F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow  Storm Sewer and  Subsurface Drainage Applications"
2021,ASTM,"F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall   Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow  Storm Sewer and  Subsurface Drainage Applications (Redline)"
2021,ASTM,"D3034-21 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2021,ASTM,"F679-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings"
2021,ASTM,"F679-21 Standard Specification for  Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer  Pipe and Fittings (Redline)"
2021,ASTM,"F412-21 Standard Terminology Relating to  Plastic Piping Systems"
2021,ASTM,"F2023-21 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water"
2021,ASTM,"F2023-21 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene   (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water (Redline)"
2021,ASTM,"F2880-21 Standard Specification for  Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe  in Nominal Pipe Sizes <fraction><num>3</num><den>4</den></fraction  > in. to 65 in."
2021,ASTM,"F2880-21 Standard Specification for  Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe  in Nominal Pipe Sizes <fraction><num>3</num><den>4</den></fraction  > in. to 65 in. (Redline)"
2021,ASTM,"D4495-21 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight"
2021,ASTM,"D4495-21 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight (Redline)"
2021,ASTM,"F3497-21 Standard Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping  Systems to Hot Chlorinated Water"
2021,ASTM,"F3183-21 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion  Joint"
2021,ASTM,"F3183-21 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion  Joint (Redline)"
2021,ASTM,"F1216-21 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2021,ASTM,"F1973-21 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems"
2021,ASTM,"F1973-21 Standard Specification for  Factory Assembled Anodeless Risers and Transition Fittings  in Polyethylene  (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12)  Fuel Gas Distribution Systems (Redline)"
2021,ASTM,"F2487-21 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines"
2021,ASTM,"F2487-21 Standard Practice for  Infiltration and Exfiltration Acceptance Testing of Installed  Corrugated   High Density Polyethylene and Polypropylene Pipelines (Redline)"
2021,ASTM,"F2897-21 Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2022,ASTM,"F2905/F2905M-22 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications"
2022,ASTM,"F2905/F2905M-22 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing  Applications (Redline)"
2021,ASTM,"F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene (HDPE)"
2021,ASTM,"F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density  Polyethylene (HDPE) (Redline)"
2022,ASTM,"D1201-13(2022)e1 Standard Specification for  Thermosetting Polyester Molding Compounds"
2022,ASTM,"D4364-13(2022)e1 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2022,ASTM,"F3536-22 Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water  Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or  Tubing"
2022,ASTM,"F876-22 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F3123-22 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)"
2022,ASTM,"F3123-22 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) (Redline)"
2022,ASTM,"F480-14(2022) Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard  Dimension Ratios (SDR), SCH 40 and SCH 80"
2022,ASTM,"F1429-99(2022) Standard Test Method for  Assembly Force of Plastic Underground Conduit Joints That Use  Flexible Elastomeric Seals Located in the Bell"
2022,ASTM,"F1675-13(2022) Standard Practice for  Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts,  Storm Sewers, and Other Buried Conduits"
2022,ASTM,"F2021-17(2022) Standard Guide for  Design and Installation of Plastic Siphonic Roof Drainage Systems"
2022,ASTM,"F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings"
2022,ASTM,"F2536-17(2022) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs"
2022,ASTM,"F2805-16(2022) Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections"
2021,ASTM,"D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals"
2021,ASTM,"D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric  Seals (Redline)"
2022,ASTM,"F3534/F3534M-22 Standard Specification for MRS-Rated Metric- and Inch-Sized Crosslinked Polyethylene (PEX)  Pressure Pipe for Gas Distribution Applications"
2022,ASTM,"F2623-22 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2022,ASTM,"F2510/F2510M-22 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes"
2022,ASTM,"F2510/F2510M-22 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures  and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene  Pipes (Redline)"
2020,ASTM,"F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings"
2022,ASTM,"D2673-14(2022) Standard Specification for Oriented Polypropylene Film"
2022,ASTM,"D3368-17(2022) Standard Specification for FEP Sheet and Film"
2022,ASTM,"D3851-17(2022) Standard Specification for Microcellular Polyurethane Shoe Soling Materials"
2022,ASTM,"D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2022,ASTM,"D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2022,ASTM,"D3768-22 Standard Test Method for  Microcellular Urethanes—Flexural Recovery"
2022,ASTM,"D3768-22 Standard Test Method for  Microcellular Urethanes—Flexural Recovery (Redline)"
2022,ASTM,"D7253-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols"
2022,ASTM,"D7253-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols (Redline)"
2022,ASTM,"D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics"
2022,ASTM,"D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics (Redline)"
2022,ASTM,"D2843-22 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics"
2022,ASTM,"D2843-22 Standard Test Method for  Density of Smoke from the Burning or Decomposition of Plastics (Redline)"
2022,ASTM,"D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source"
2022,ASTM,"D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a  Radiant Heat Energy Source (Redline)"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry (Redline)"
2022,ASTM,"D6437-22 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols)"
2022,ASTM,"D6437-22 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols) (Redline)"
2022,ASTM,"D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2022,ASTM,"D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis (Redline)"
2022,ASTM,"D731-22 Standard Test Method for  Molding Index of Thermosetting Molding Powder"
2022,ASTM,"D731-22 Standard Test Method for  Molding Index of Thermosetting Molding Powder (Redline)"
2022,ASTM,"D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials"
2022,ASTM,"D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials (Redline)"
2022,ASTM,"F3378/F3378M-22 Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe"
2022,ASTM,"F2648/F2648M-22 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications"
2022,ASTM,"D2837-22 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products"
2022,ASTM,"D2837-22 Standard Test Method for  Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials   or Pressure Design Basis for Thermoplastic Pipe Products (Redline)"
2022,ASTM,"D6662-22 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2022,ASTM,"D6662-22 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards (Redline)"
2022,ASTM,"F1802-22 Standard Test Method for  Performance Testing of Excess Flow Valves"
2022,ASTM,"F1802-22 Standard Test Method for  Performance Testing of Excess Flow Valves (Redline)"
2022,ASTM,"F876-22ae1 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F876-22a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2022,ASTM,"F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe"
2022,ASTM,"F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe (Redline)"
2019,ASTM,"D4812-19e1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics"
2022,ASTM,"F3564-22 Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12)  Gas Pipe During Pull-In Installation"
2022,ASTM,"F3371-22 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent  Applications"
2022,ASTM,"F3371-22 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent  Applications (Redline)"
2022,ASTM,"D3308-12(2022) Standard Specification for  PTFE Resin Skived Tape"
2022,ASTM,"D3567-17(2022) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings"
2022,ASTM,"D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric"
2022,ASTM,"D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding  and Extrusion Materials"
2022,ASTM,"D6585-17(2022) Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape"
2022,ASTM,"D7193-17(2022) Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape"
2022,ASTM,"F714-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"
2022,ASTM,"F714-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter (Redline)"
2022,ASTM,"F2160-22 Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2022,ASTM,"F628-22 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2022,ASTM,"F1668-16(2022) Standard Guide for  Construction Procedures for Buried Plastic Pipe"
2022,ASTM,"D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to  Heat and Moisture"
2022,ASTM,"D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to  Heat and Moisture (Redline)"
2022,ASTM,"D1239-22 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals"
2022,ASTM,"D1243-22 Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers"
2022,ASTM,"D1243-22 Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers (Redline)"
2022,ASTM,"D1667-22 Standard Specification for  Flexible Cellular Materials—Poly (Vinyl Chloride) Foam  (Closed-Cell)"
2022,ASTM,"D1667-22 Standard Specification for  Flexible Cellular Materials—Poly (Vinyl Chloride) Foam  (Closed-Cell) (Redline)"
2022,ASTM,"D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers"
2022,ASTM,"D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers (Redline)"
2022,ASTM,"D3291-22 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression"
2022,ASTM,"D3291-22 Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics  Under Compression (Redline)"
2022,ASTM,"D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds"
2022,ASTM,"D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated  Poly(Vinyl Chloride) (CPVC) Building Products Compounds (Redline)"
2022,ASTM,"D4477-22 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2022,ASTM,"D4477-22 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit (Redline)"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials (Redline)"
2022,ASTM,"D5260-22 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds"
2022,ASTM,"D5260-22 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds (Redline)"
2022,ASTM,"D6263-22 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2022,ASTM,"D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions"
2022,ASTM,"D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions (Redline)"
2022,ASTM,"D2749-22 Standard Symbols for  Dimensions of Plastic Pipe Fittings"
2022,ASTM,"D4670-17(2022)e1 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols"
2022,ASTM,"D5208-14(2022) Standard Practice for  Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2022,ASTM,"D6261-14(2022) Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester (TPES)"
2022,ASTM,"D7083-16(2022) Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography"
2022,ASTM,"D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics  in a Horizontal Position"
2022,ASTM,"D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics  in a Horizontal Position (Redline)"
2022,ASTM,"D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2022,ASTM,"D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy (Redline)"
2022,ASTM,"D7252-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates"
2022,ASTM,"D7252-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates (Redline)"
2022,ASTM,"F877-22 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2022,ASTM,"F3347-22 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2022,ASTM,"F3348-22 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2022,ASTM,"D638-22 Standard Test Method for  Tensile Properties of Plastics"
2022,ASTM,"D638-22 Standard Test Method for  Tensile Properties of Plastics (Redline)"
2022,ASTM,"D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method"
2022,ASTM,"D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart  Method (Redline)"
2022,ASTM,"D3294-22 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes"
2022,ASTM,"D3294-22 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded  Basic Shapes (Redline)"
2022,ASTM,"D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2022,ASTM,"D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges (Redline)"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials (Redline)"
2022,ASTM,"D5870-22 Standard Practice for Calculating Property Retention Index of Plastics"
2022,ASTM,"D5870-22 Standard Practice for Calculating Property Retention Index of Plastics (Redline)"
2022,ASTM,"D6783-05a(2022) Standard Specification for Polymer Concrete Pipe"
2022,ASTM,"D7774-22 Standard Test Method for  Flexural Fatigue Properties of Plastics"
2022,ASTM,"D7774-22 Standard Test Method for  Flexural Fatigue Properties of Plastics (Redline)"
2022,ASTM,"D7791-22 Standard Test Method for  Uniaxial Fatigue Properties of Plastics"
2022,ASTM,"D7791-22 Standard Test Method for  Uniaxial Fatigue Properties of Plastics (Redline)"
2022,ASTM,"D2235-22 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings"
2022,ASTM,"D2235-22 Standard Specification for  Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic   Pipe and Fittings (Redline)"
2022,ASTM,"D3485-22 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC)"
2022,ASTM,"D3485-22 Standard Specification for  Coilable High Density Polyethylene (HDPE) Cable in Conduit  (CIC) (Redline)"
2022,ASTM,"D2115-22 Standard Practice for  Oven Heat Stability of Poly(Vinyl Chloride) Compositions"
2022,ASTM,"D2115-22 Standard Practice for  Oven Heat Stability of Poly(Vinyl Chloride) Compositions (Redline)"
2022,ASTM,"D5672/D5672M-22 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique"
2022,ASTM,"D5672/D5672M-22 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique (Redline)"
2022,ASTM,"F2769-22 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2021,ASTM,"F1504-21e1 Standard Specification for  Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and   Conduit Rehabilitation"
2022,ASTM,"F1216-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube"
2022,ASTM,"F1216-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion  and Curing of a Resin-Impregnated Tube (Redline)"
2022,ASTM,"D2122-22 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings"
2022,ASTM,"D2122-22 Standard Test Method for  Determining Dimensions of Thermoplastic Pipe and Fittings (Redline)"
2022,ASTM,"D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2022,ASTM,"F409-22 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings"
2022,ASTM,"F409-22 Standard Specification for  Thermoplastic Accessible and Replaceable Plastic Tube and Tubular   Fittings (Redline)"
2022,ASTM,"F1499-22 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV)"
2022,ASTM,"F1499-22 Standard Specification for  Coextruded Composite Drain, Waste, and Vent Pipe (DWV) (Redline)"
2022,ASTM,"F1901-22 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems"
2022,ASTM,"F1901-22 Standard Specification for  Polyethylene (PE) Pipe and Fittings for Roof Drain Systems (Redline)"
2022,ASTM,"D542-22 Standard Test Method for  Index of Refraction of Transparent Organic Plastics"
2022,ASTM,"D542-22 Standard Test Method for  Index of Refraction of Transparent Organic Plastics (Redline)"
2022,ASTM,"D1203-22 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods"
2022,ASTM,"D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals"
2022,ASTM,"D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals (Redline)"
2022,ASTM,"D1562-22 Standard Classification System and Basis for Specification for  Cellulose Acetate Propionate Molding and Extrusion Compounds  (CAP)"
2022,ASTM,"D1562-22 Standard Classification System and Basis for Specification for  Cellulose Acetate Propionate Molding and Extrusion Compounds  (CAP) (Redline)"
2022,ASTM,"D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting"
2022,ASTM,"D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting (Redline)"
2022,ASTM,"D3591-22 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds"
2022,ASTM,"D3591-22 Standard Test Method for  Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride)  (PVC) in Formulated Compounds (Redline)"
2022,ASTM,"D4396-22 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications"
2022,ASTM,"D4396-22 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl  Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure  Applications (Redline)"
2022,ASTM,"D4551-22 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2022,ASTM,"D4551-22 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane (Redline)"
2022,ASTM,"D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2022,ASTM,"D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer (Redline)"
2022,ASTM,"F3541-22 Standard Practice for  Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines  and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place  Thermosetting Resin Pipe (CIPP)"
2022,ASTM,"F2160-22a Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD)"
2022,ASTM,"F2160-22a Standard Specification for  Solid Wall High Density Polyethylene (HDPE) Conduit Based on   Controlled Outside Diameter (OD) (Redline)"
2022,ASTM,"D2238-22 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup>"
2022,ASTM,"D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials"
2022,ASTM,"D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials (Redline)"
2022,ASTM,"D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2022,ASTM,"D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials (Redline)"
2022,ASTM,"F1970-22 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2022,ASTM,"F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a  Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration"
2022,ASTM,"F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a  Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration (Redline)"
2022,ASTM,"D570-22 Standard Test Method for Water Absorption of Plastics"
2022,ASTM,"D570-22 Standard Test Method for Water Absorption of Plastics (Redline)"
2022,ASTM,"F1056-18(2022) Standard Specification for  Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene   Pipe or Tubing and Fittings"
2022,ASTM,"F2994-18(2022) Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP)  Impregnation Systems"
2022,ASTM,"D2949-22 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings"
2022,ASTM,"D2949-22 Standard Specification for  3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic   Drain, Waste, and Vent Pipe and Fittings (Redline)"
2022,ASTM,"D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns"
2022,ASTM,"D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns (Redline)"
2022,ASTM,"F493-22 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings"
2022,ASTM,"F493-22 Standard Specification for  Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)   Plastic Pipe and Fittings (Redline)"
2022,ASTM,"F1960-22 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2022,ASTM,"C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant  Thermoplastics"
2022,ASTM,"D5630-22 Standard Test Method for Ash Content in Plastics"
2022,ASTM,"D4350-16(2022) Standard Test Method for  Corrosivity Index of Plastics and Fillers"
2022,ASTM,"D5045-14(2022) Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2022,ASTM,"F905-04(2022) Standard Practice for  Qualification of Polyethylene Saddle-Fused Joints"
2022,ASTM,"F1055-16a(2022) Standard Specification for  Electrofusion Type Polyethylene Fittings for Outside Diameter   Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and   Tubing"
2022,ASTM,"D883-22 Standard Terminology Relating to Plastics"
2022,ASTM,"D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2022,ASTM,"D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels (Redline)"
2022,ASTM,"D2291/D2291M-22 Standard Practice for  Fabrication of Ring Test Specimens for Glass-Resin Composites"
2022,ASTM,"D2291/D2291M-22 Standard Practice for  Fabrication of Ring Test Specimens for Glass-Resin Composites (Redline)"
2022,ASTM,"D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2022,ASTM,"D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials (Redline)"
2022,ASTM,"D5319-22 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2022,ASTM,"D5319-22 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels (Redline)"
2022,ASTM,"D6263-22a Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2022,ASTM,"D2239-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter"
2022,ASTM,"D2239-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled   Inside Diameter (Redline)"
2022,ASTM,"D2737-22 Standard Specification for  Polyethylene (PE) Plastic Tubing"
2022,ASTM,"D2737-22 Standard Specification for  Polyethylene (PE) Plastic Tubing (Redline)"
2022,ASTM,"D3035-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter"
2022,ASTM,"D3035-22 Standard Specification for  Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled   Outside Diameter (Redline)"
2022,ASTM,"D7486-22 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2022,ASTM,"D7486-22 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis (Redline)"
2022,ASTM,"F1741-22 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits"
2022,ASTM,"F1741-22 Standard Practice for  Installation of Machine Spiral Wound Poly (Vinyl Chloride)   (PVC) Liner  Pipe for Rehabilitation of Existing Sewers and Conduits (Redline)"
2022,ASTM,"F1743-22 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)"
2022,ASTM,"F1743-22 Standard Practice for  Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place   Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) (Redline)"
2022,ASTM,"F1867-22 Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation"
2022,ASTM,"F1867-22 Standard Practice for  Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe   Type A for Existing Sewer and Conduit Rehabilitation (Redline)"
2022,ASTM,"F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method"
2022,ASTM,"F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled   in  Place Installation of Glass Reinforced Plastic Cured-in-Place  (GRP-CIPP) Using the UV-Light Curing Method (Redline)"
2022,ASTM,"F2599-22 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  >"
2022,ASTM,"F2599-22 Standard Practice for  Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place  Liner<rangeref></rangeref  > (Redline)"
2022,ASTM,"F1962-22 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings"
2022,ASTM,"F1962-22 Standard Guide for  Use of Maxi-Horizontal Directional Drilling for Placement of   Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Redline)"
2022,ASTM,"D2992-22 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2022,ASTM,"D2992-22 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (Redline)"
2023,ASTM,"D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials"
2023,ASTM,"D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains  in Transparent or Translucent Plastic Materials (Redline)"
2023,ASTM,"F2261-06(2023) Standard Test Method for  Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule  40 and 80 Socket-Type"
2023,ASTM,"F2928-18(2023) Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE)  Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods"
2022,ASTM,"D3916-22 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod"
2022,ASTM,"D3916-22 Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk  /> Plastic Rod (Redline)"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials (Redline)"
2023,ASTM,"D1238-23 Standard Test Method for  Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2023,ASTM,"F876-23 Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2023,ASTM,"F877-23 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems"
2023,ASTM,"F877-23 Standard Specification for  Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution   Systems (Redline)"
2023,ASTM,"F1281-23 Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2023,ASTM,"F1807-23 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F1807-23 Standard Specification for  Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps, for SDR9  Cross-linked Polyethylene (PEX)  Tubing and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F2080-23 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe"
2023,ASTM,"F2080-23 Standard Specification for  Cold-Expansion Fittings with Metal Compression-Sleeves for   Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised  Temperature (PE-RT) Pipe (Redline)"
2023,ASTM,"F2389-23 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems"
2023,ASTM,"F2389-23 Standard Specification for  Pressure-rated Polypropylene (PP) Piping Systems (Redline)"
2023,ASTM,"F3347-23 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2023,ASTM,"F3347-23 Standard Specification for  Metal Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"D2657-07(2023) Standard Practice for  Heat Fusion Joining of Polyolefin Pipe and Fittings"
2023,ASTM,"F1483-23 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe"
2023,ASTM,"F1483-23 Standard Specification for  Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe (Redline)"
2023,ASTM,"F1970-23 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems"
2023,ASTM,"F1970-23 Standard Specification for  Special Engineered Fittings, Appurtenances or Valves for use  in Poly  (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride)  (CPVC) Systems (Redline)"
2023,ASTM,"F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric  SDR-PR)"
2023,ASTM,"F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric  SDR-PR) (Redline)"
2023,ASTM,"D2578-23 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films"
2023,ASTM,"D2578-23 Standard Test Method for  Wetting Tension of Polyethylene and Polypropylene Films (Redline)"
2022,ASTM,"F1412-22 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems"
2022,ASTM,"F1412-22 Standard Specification for  Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems (Redline)"
2023,ASTM,"F3182-23 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines  for Potable Water"
2023,ASTM,"F3182-23 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines  for Potable Water (Redline)"
2023,ASTM,"F1282-23 Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2023,ASTM,"D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods"
2023,ASTM,"D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection  Molding and Extrusion Materials Using ASTM Methods (Redline)"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates (Redline)"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics (Redline)"
2023,ASTM,"D5629-23 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers"
2023,ASTM,"D5629-23 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers (Redline)"
2023,ASTM,"D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2023,ASTM,"D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities (Redline)"
2022,ASTM,"D6400-22 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2023,ASTM,"D7258-23 Standard Specification for Polymeric Piles"
2023,ASTM,"D7258-23 Standard Specification for Polymeric Piles (Redline)"
2023,ASTM,"D7568-23 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
2023,ASTM,"D7568-23 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications (Redline)"
2023,ASTM,"D7711-23 Standard Guide for Description of Polymer Pellet Defects"
2023,ASTM,"D7711-23 Standard Guide for Description of Polymer Pellet Defects (Redline)"
2023,ASTM,"F3597-23 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX)  Pressure Pipe for Oil and Gas Producing Applications"
2023,ASTM,"F2159-23 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing"
2023,ASTM,"F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate  Stainless Steel Clamps for SDR9  Crosslinked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised  Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"D4273-23 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols"
2023,ASTM,"D4273-23 Standard Test Method for  Polyurethane Raw Materials: Determination of Primary Hydroxyl  Content of Polyether Polyols (Redline)"
2023,ASTM,"D5991-23 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2023,ASTM,"D5991-23 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake (Redline)"
2023,ASTM,"D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2023,ASTM,"D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) (Redline)"
2023,ASTM,"D6265-23 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2023,ASTM,"D6265-23 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test (Redline)"
2023,ASTM,"D6288-23 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2023,ASTM,"D6288-23 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing (Redline)"
2023,ASTM,"F2145-23 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing"
2023,ASTM,"F2145-23 Standard Specification for  Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings  for Use on Outside Diameter Controlled Polyamide 11 and Polyamide  12 Pipe and Tubing (Redline)"
2023,ASTM,"D707-15(2023) Standard Classification System and Basis for Specification for  Cellulose Acetate Butyrate Molding and Extrusion Compounds  (CAB)"
2023,ASTM,"D2839-16(2023) Standard Practice for  Use of a Melt Index Strand for Determining Density of Polyethylene"
2023,ASTM,"D5575-18(2023) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2023,ASTM,"D4274-23 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols"
2023,ASTM,"D4274-23 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers  of Polyols (Redline)"
2023,ASTM,"D4660-23 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate"
2023,ASTM,"D4660-23 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isomer Content  of Toluenediisocyanate (Redline)"
2023,ASTM,"D5138-23 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
2023,ASTM,"D5138-23 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP) (Redline)"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials (Redline)"
2023,ASTM,"D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2023,ASTM,"D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) (Redline)"
2023,ASTM,"D256-23e1 Standard Test Methods for  Determining the Izod Pendulum Impact Resistance of Plastics"
2023,ASTM,"D256-23 Standard Test Methods for  Determining the Izod Pendulum Impact Resistance of Plastics"
2023,ASTM,"F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor  Tanks"
2023,ASTM,"F441/F441M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80"
2023,ASTM,"F441/F441M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules  40 and 80 (Redline)"
2023,ASTM,"F442/F442M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)"
2023,ASTM,"F442/F442M-23 Standard Specification for  Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) (Redline)"
2023,ASTM,"F2764/F2764M-23 Standard Specification for  6 in. to 60 in. [150 mm to 1500 mm] Polypropylene  (PP) Corrugated Double and Triple Wall  Pipe and Fittings for Non-Pressure  Sanitary Sewer Applications"
2023,ASTM,"F2764/F2764M-23 Standard Specification for  6 in. to 60 in. [150 mm to 1500 mm] Polypropylene  (PP) Corrugated Double and Triple Wall  Pipe and Fittings for Non-Pressure  Sanitary Sewer Applications (Redline)"
2023,ASTM,"F1866-23 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings"
2023,ASTM,"F1866-23 Standard Specification for  Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and   DWV Fabricated Fittings (Redline)"
2023,ASTM,"F2735-23 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing"
2023,ASTM,"F2735-23 Standard Specification for  Plastic Insert Fittings For SDR9 Cross-linked Polyethylene   (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F3253-23 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for  Hot- and Cold-Water Hydronic Distribution Systems"
2023,ASTM,"F3253-23 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for  Hot- and Cold-Water Hydronic Distribution Systems (Redline)"
2023,ASTM,"F1960-23 Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F1960-23a Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F2769-23 Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2023,ASTM,"F2769-23a Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems"
2023,ASTM,"F2769-23a Standard Specification for  Polyethylene of Raised Temperature (PE-RT) Plastic Hot and   Cold-Water Tubing and Distribution Systems (Redline)"
2023,ASTM,"F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2023,ASTM,"F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing (Redline)"
2023,ASTM,"F3348-23 Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless  Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing  and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing"
2023,ASTM,"C582-23 Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment"
2023,ASTM,"C582-23 Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment (Redline)"
2023,ASTM,"D785-23 Standard Test Method for  Rockwell Hardness of Plastics and Electrical Insulating Materials"
2023,ASTM,"D785-23 Standard Test Method for  Rockwell Hardness of Plastics and Electrical Insulating Materials (Redline)"
2023,ASTM,"F1365-91(2023) Standard Test Method for  Water Infiltration Resistance of Plastic Underground Conduit   Joints Which Use Flexible Elastomeric Seals"
2023,ASTM,"D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry"
2023,ASTM,"D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry (Redline)"
2023,ASTM,"F3128-23 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent  Pipe with a Cellular Core"
2023,ASTM,"F3128-23 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent  Pipe with a Cellular Core (Redline)"
2023,ASTM,"F3524/F3524M-23 Standard Specification for Polyamide-12 (PA12) Line Pipe"
2023,ASTM,"F3524/F3524M-23 Standard Specification for Polyamide-12 (PA12) Line Pipe (Redline)"
2023,ASTM,"D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting  by Pendulum Method"
2023,ASTM,"D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting  by Pendulum Method (Redline)"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (Redline)"
2023,ASTM,"D5421-23 Standard Specification for  Contact Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2023,ASTM,"D5421-23 Standard Specification for  Contact Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges (Redline)"
2023,ASTM,"D7211-23 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2023,ASTM,"D7211-23 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use (Redline)"
2023,ASTM,"D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials  Used as Exterior Wall Coverings"
2023,ASTM,"F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications"
2023,ASTM,"F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated  Profile Wall  Polyethylene  (PE) Pipe and Fittings for Land Drainage  Applications (Redline)"
2023,ASTM,"D1621-16(2023) Standard Test Method for  Compressive Properties of Rigid Cellular Plastics"
2023,ASTM,"D1623-17(2023) Standard Test Method for  Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics"
2023,ASTM,"D3275-18(2023) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials"
2023,ASTM,"D4895-18(2023) Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2023,ASTM,"D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics"
2023,ASTM,"D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics (Redline)"
2023,ASTM,"D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins"
2023,ASTM,"D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (Redline)"
2023,ASTM,"F438-23 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40"
2023,ASTM,"F438-23 Standard Specification for  Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic  Pipe Fittings, Schedule 40 (Redline)"
1986,ASTM,"E375-75 (1986) Definitions of Terms Relating to Resinography (Withdrawn 1992)"
2023,ASTM,"D6117-23 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2023,ASTM,"D6117-23 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes (Redline)"
2023,ASTM,"D1746-23 Standard Test Method for  Transparency of Plastic Sheeting"
2023,ASTM,"D1746-23 Standard Test Method for  Transparency of Plastic Sheeting (Redline)"
2023,ASTM,"D3681-23 Standard Test Method for  Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition"
2023,ASTM,"D3681-23 Standard Test Method for  Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition (Redline)"
2023,ASTM,"D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2023,ASTM,"D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Redline)"
2023,ASTM,"F1281-23a Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe"
2023,ASTM,"F1281-23a Standard Specification for  Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene  (PEX-AL-PEX) Pressure Pipe (Redline)"
2023,ASTM,"F1282-23a Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe"
2023,ASTM,"F1282-23a Standard Specification for  Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure   Pipe (Redline)"
2023,ASTM,"F1473-23 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins"
2023,ASTM,"F1473-23 Standard Test Method for  Notch Tensile Test to Measure the Resistance to Slow Crack   Growth of Polyethylene Pipes and Resins (Redline)"
2023,ASTM,"F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe"
2023,ASTM,"F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene  and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite  Pressure Pipe (Redline)"
2023,ASTM,"F412-23 Standard Terminology Relating to  Plastic Piping Systems"
2023,ASTM,"F412-23 Standard Terminology Relating to  Plastic Piping Systems (Redline)"
2023,ASTM,"F628-23 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core"
2023,ASTM,"F628-23 Standard Specification for  Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,  Waste, and Vent Pipe With a Cellular Core (Redline)"
2023,ASTM,"F758-14(2023) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems  for Highway, Airport, and Similar Drainage"
2023,ASTM,"F2207-06(2023) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic   Gas Pipe"
2023,ASTM,"F2817-13(2023) Standard Specification for  Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings   For Maintenance or Repair"
2023,ASTM,"F2818-10(2023) Standard Specification for  Specification for Crosslinked Polyethylene (PEX) Material Gas   Pressure Pipe and Tubing"
2023,ASTM,"F2986-12(2023) Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate  Applications"
2023,ASTM,"F3181-16(2023) Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS)  for HDPE Materials Containing Post- Consumer Recycled HDPE"
2023,ASTM,"D1598-23 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure"
2023,ASTM,"D1598-23 Standard Test Method for  Time-to-Failure of Plastic Pipe Under Constant Internal Pressure (Redline)"
2023,ASTM,"F3203-19(2023) Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX)  Pipes and Tubing"
2023,ASTM,"F2897-23 Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2023,ASTM,"D2466-23 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40"
2023,ASTM,"D2466-23 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule  40 (Redline)"
2023,ASTM,"D2343-17(2023) Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings  Used in Reinforced Plastics"
2023,ASTM,"D695-23 Standard Test Method for Compressive Properties of Rigid Plastics"
2023,ASTM,"D695-23 Standard Test Method for Compressive Properties of Rigid Plastics (Redline)"
2023,ASTM,"D3489-23 Standard Test Methods for  Microcellular Urethane Materials"
2023,ASTM,"D3489-23 Standard Test Methods for  Microcellular Urethane Materials (Redline)"
2023,ASTM,"D6041-23 Standard Specification for  Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2023,ASTM,"D6041-23 Standard Specification for  Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Redline)"
2023,ASTM,"D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK)"
2023,ASTM,"D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK) (Redline)"
2023,ASTM,"D6835-23 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE)"
2023,ASTM,"D6835-23 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE) (Redline)"
2023,ASTM,"F2896-23 Standard Specification for  Reinforced Polyethylene Composite Pipe For The Transport Of   Oil And Gas And Hazardous Liquids"
2023,ASTM,"F2896-23 Standard Specification for  Reinforced Polyethylene Composite Pipe For The Transport Of   Oil And Gas And Hazardous Liquids (Redline)"
2023,ASTM,"D8501-23 Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing"
2023,ASTM,"D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers"
2023,ASTM,"D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (Redline)"
2023,ASTM,"D4272/D4272M-23 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop"
2023,ASTM,"D4272/D4272M-23 Standard Test Method for  Total Energy Impact of Plastic Films by Dart Drop (Redline)"
2023,ASTM,"F1960-23b Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing"
2023,ASTM,"F1960-23b Standard Specification for  Cold Expansion Fittings with PEX Reinforcing Rings for Use   with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature  (PE-RT) Tubing (Redline)"
2023,ASTM,"F3124-23 Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion  Joints in Plastic Piping Systems or Fittings"
2023,ASTM,"F3565-23 Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for  Pressure Pipe Service"
2023,ASTM,"D3034-23 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings"
2023,ASTM,"D3034-23 Standard Specification for  Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Redline)"
2023,ASTM,"D2464-23 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80"
2023,ASTM,"D2464-23 Standard Specification for  Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,   Schedule 80 (Redline)"
2023,ASTM,"F891-23 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core"
2023,ASTM,"F891-23 Standard Specification for  Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular   Core (Redline)"
2023,ASTM,"F2418-23 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers"
2023,ASTM,"F2418-23 Standard Specification for  Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers (Redline)"
2023,ASTM,"D2517-18(2023) Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2023,ASTM,"D5677-17(2023) Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2023,ASTM,"D2565-23 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications"
2023,ASTM,"D2565-23 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications (Redline)"
2023,ASTM,"D2863-23 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index)"
2023,ASTM,"D2863-23 Standard Test Method for  Measuring the Minimum Oxygen Concentration to Support Candle-Like  Combustion of Plastics (Oxygen Index) (Redline)"
2023,ASTM,"D2996-23 Standard Specification for  Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2023,ASTM,"D2996-23 Standard Specification for  Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe (Redline)"
2022,ASTM,"D1243-22e1 Standard Test Method for  Dilute Solution Viscosity of Vinyl Chloride Polymers"
2023,ASTM,"F2897-23a Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)"
2023,ASTM,"F2897-23a Standard Specification for  Tracking and Traceability Encoding System of Natural Gas Distribution   Components (Pipe, Tubing, Fittings, Valves, and Appurtenances) (Redline)"
2023,ASTM,"D2152-23 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion"
2023,ASTM,"D2152-23 Standard Test Method for  Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe   and Molded Fittings by Acetone Immersion (Redline)"
2023,ASTM,"D2561-17(2023) Standard Test Method for  Environmental Stress-Crack Resistance of Blow-Molded Polyethylene  Containers"
2023,ASTM,"D2659-16(2023) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers"
2023,ASTM,"D2911/D2911M-16(2023) Standard Specification for  Dimensions and Tolerances for Plastic Bottles"
2023,ASTM,"D2924-12(2023) Standard Test Method for External Pressure Resistance of “Fiberglass”<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2023,ASTM,"D4204-16(2023) Standard Practice for  Preparing Plastic Film Specimens for a Round-Robin Study"
2023,ASTM,"D4397-16(2023) Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2023,ASTM,"D5047-17(2023) Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2023,ASTM,"D5508-23 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC)"
2023,ASTM,"D5508-23 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC) (Redline)"
2023,ASTM,"D5675-13(2023) Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2023,ASTM,"D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2023,ASTM,"D8065/D8065M-16(2023) Standard Classification System and Basis for Specification for Specifying Plastic Films"
2023,ASTM,"F2600-09(2023) Standard Specification for  Electrofusion Type Polyamide-11 Fittings for Outside Diameter  Controlled Polyamide-11 Pipe and Tubing"
2023,ASTM,"F2767-18(2023) Standard Specification for  Electrofusion Type Polyamide-12 Fittings for Outside Diameter   Controlled Polyamide-12 Pipe and Tubing for Gas Distribution"
2023,ASTM,"F3308/F3308M-19(2023) Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene  (PE) Pipe for Non-Pressure Applications"
2023,ASTM,"F3124-23a Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion  Joints in Plastic Piping Systems or Fittings"
2023,ASTM,"F3124-23a Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion  Joints in Plastic Piping Systems or Fittings (Redline)"
2023,ASTM,"F2945-18(2023) Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings"
2023,ASTM,"D2734-23 Standard Test Methods for  Void Content of Reinforced Plastics"
2023,ASTM,"D2734-23 Standard Test Methods for  Void Content of Reinforced Plastics (Redline)"
2023,ASTM,"F1563-23 Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing"
2023,ASTM,"F1563-23 Standard Specification for  Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing (Redline)"
2023,ASTM,"D883-23 Standard Terminology Relating to Plastics"
2023,ASTM,"D883-23 Standard Terminology Relating to Plastics (Redline)"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology (Redline)"
2023,ASTM,"D5023-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending)"
2023,ASTM,"D5023-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point  Bending) (Redline)"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension (Redline)"
2023,ASTM,"D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam)"
2023,ASTM,"D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam) (Redline)"
2023,ASTM,"D1203-23 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods"
2023,ASTM,"D1203-23 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods (Redline)"
2023,ASTM,"D3763-23 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors"
2023,ASTM,"D3763-23 Standard Test Method for  High Speed Puncture Properties of Plastics Using Load and Displacement  Sensors (Redline)"
2023,ASTM,"D3917-23 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes"
2023,ASTM,"D3917-23 Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic  Pultruded Shapes (Redline)"
2023,ASTM,"D5814-23 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test"
2023,ASTM,"D5814-23 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test (Redline)"
2023,ASTM,"D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing"
2023,ASTM,"D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing (Redline)"
2023,ASTM,"D2103-23 Standard Specification for  Polyethylene Film and Sheeting"
2023,ASTM,"D5024-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression"
2023,ASTM,"D5024-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Compression (Redline)"
2023,ASTM,"F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm  and Sanitary Sewer Pipe"
2023,ASTM,"D6112-23 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2023,ASTM,"D6112-23 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes (Redline)"
2023,ASTM,"D8540-23 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the  Edgewise Position Using a Dry Bath"
2023,ASTM,"D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"
2023,ASTM,"D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (Redline)"
2023,ASTM,"D8539-23 Standard Guide for Measurement of Polyolefin Properties Using TD-NMR Relaxometry"
2023,ASTM,"F2986-23 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate,  Heap Leach Aeration and Other Mining Applications"
2023,ASTM,"F2986-23 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate,  Heap Leach Aeration and Other Mining Applications (Redline)"
2023,ASTM,"D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets"
2023,ASTM,"D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets (Redline)"
2023,ASTM,"F3240-19(2023) Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG)  for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main  and Lateral Pipelines"
2023,ASTM,"F876-23a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing"
2023,ASTM,"F876-23a Standard Specification for  Crosslinked Polyethylene (PEX) Tubing (Redline)"
2023,ASTM,"F2623-23 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications"
2023,ASTM,"F2623-23 Standard Specification for  Polyethylene of Raised Temperature (PE-RT)  Systems for Non-Potable  Water Applications (Redline)"
2023,ASTM,"D2103-23a Standard Specification for  Polyethylene Film"
2023,ASTM,"D2103-23a Standard Specification for  Polyethylene Film (Redline)"
2023,ASTM,"D6042-23 Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC)"
2023,ASTM,"D6042-23 Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC) (Redline)"
2024,ASTM,"D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation"
2024,ASTM,"D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation (Redline)"
2023,ASTM,"D7792/D7792M-23 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs"
2023,ASTM,"D7792/D7792M-23 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs (Redline)"
2023,ASTM,"D7992/D7992M-23 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs"
2023,ASTM,"D7992/D7992M-23 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs (Redline)"
2024,ASTM,"F512-19(2024) Standard Specification for  Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings   for Underground Installation"