2003,ASTM,"D4289-03 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids"
2008,ASTM,"D4289-03(2008) Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids"
1997,ASTM,"D4289-97 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids"
2005,ASTM,"D4178-82(2005) Standard Practice for Calibrating Moisture Analyzers"
2009,ASTM,"D4291-04(2009) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil"
2008,ASTM,"D4293-83(2008) Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication"
2006,ASTM,"D4304-06a Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines"
2007,ASTM,"D4306-07 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
2006,ASTM,"D4377-00(2006) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration"
2008,ASTM,"D4378-08 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines"
2006,ASTM,"D4418-00(2006) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines"
2008,ASTM,"D4422-03(2008) Standard Test Method for Ash in Analysis of Petroleum Coke"
2009,ASTM,"D4424-09 Standard Test Method for Butylene Analysis by Gas Chromatography"
2009,ASTM,"D4425-09 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)"
2006,ASTM,"D4486-91(2006) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2006,ASTM,"D4529-01(2006) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels"
2007,ASTM,"D4530-07 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2009,ASTM,"D4539-09 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
2008,ASTM,"D4616-95(2008) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch"
2009,ASTM,"D4625-04(2009) Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)"
2005,ASTM,"D4626-95(2005) Standard Practice for Calculation of Gas Chromatographic Response Factors"
2007,ASTM,"D4627-92(2007) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids"
2005,ASTM,"D4628-05 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry"
2008,ASTM,"D4682-08 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2008,ASTM,"D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
2007,ASTM,"D4693-07 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2009,ASTM,"D4737-09 Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2009,ASTM,"D4740-04(2009) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2006,ASTM,"D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer"
2008,ASTM,"D4746-98(2008) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration"
2006,ASTM,"D4808-01(2006) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy"
2009,ASTM,"D4809-09a Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2008,ASTM,"D4857-08 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2008,ASTM,"D4858-08 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines"
2008,ASTM,"D4859-08 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC"
2008,ASTM,"D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)"
2005,ASTM,"D4864-90(2005) Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography"
2009,ASTM,"D4865-09 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems"
2009,ASTM,"D4870-09 Standard Test Method for Determination of Total Sediment in Residual Fuels"
2006,ASTM,"D4871-06 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus"
2009,ASTM,"D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)"
2005,ASTM,"D4898-90(2005) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis"
2007,ASTM,"D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil"
2006,ASTM,"D4930-06 Standard Test Method for Dust Control Material on Calcined Petroleum Coke"
2006,ASTM,"D4931-06 Standard Test Method for Gross Moisture in Green Petroleum Coke"
2008,ASTM,"D4950-08 Standard Classification and Specification of Automotive Service Greases"
2009,ASTM,"D4951-09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
2009,ASTM,"D4952-09 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)"
2006,ASTM,"D4953-06 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)"
2005,ASTM,"D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor"
2005,ASTM,"D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer"
2006,ASTM,"D5003-06a Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke"
2009,ASTM,"D5018-89(2009) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches"
2007,ASTM,"D5059-07 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
2005,ASTM,"D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique"
2008,ASTM,"D5182-97(2008) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)"
2005,ASTM,"D5183-05 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine"
2006,ASTM,"D5184-01(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry"
2009,ASTM,"D5185-09 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2009,ASTM,"D5186-03(2009) Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography"
2007,ASTM,"D5190-07 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)"
2007,ASTM,"D5234-92(2007) Standard Guide for Analysis of Ethylene Product"
2007,ASTM,"D5273-92(2007) Standard Guide for Analysis of Propylene Concentrates"
2003,ASTM,"D5275-03 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids"
2009,ASTM,"D5292-99(2009) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy"
2007,ASTM,"D5303-92(2007) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
2006,ASTM,"D5304-06 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure"
2007,ASTM,"D5305-97(2007) Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2007,ASTM,"D5306-92(2007) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids"
2009,ASTM,"D5372-04(2009) Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids"
2005,ASTM,"D5384-95(2005) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)"
2008,ASTM,"D5442-93(2008) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography"
2008,ASTM,"D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2009,ASTM,"D5453-09 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence"
2004,ASTM,"D5481-04 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer"
2007,ASTM,"D5482-07 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)"
2005,ASTM,"D5483-05 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry"
2008,ASTM,"D5500-98(2008) Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2009,ASTM,"D5501-09 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography"
2005,ASTM,"D5534-94(2005) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids"
2007,ASTM,"D5598-01(2007) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling"
2005,ASTM,"D5599-00(2005) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection"
2005,ASTM,"D5619-00(2005) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine"
2007,ASTM,"D5621-07 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids"
2005,ASTM,"D5622-95(2005) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis"
2009,ASTM,"D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection"
2008,ASTM,"D5705-03(2008) Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils"
2005,ASTM,"D5706-05 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine"
2005,ASTM,"D5707-05 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2005,ASTM,"D5708-05 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry"
2006,ASTM,"D5761-96(2006) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials"
2007,ASTM,"D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing"
2007,ASTM,"D5797-07 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
2006,ASTM,"D5845-01(2006) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and <i>tert</i>-Butanol in Gasoline by Infrared Spectroscopy"
2007,ASTM,"D5846-07 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus"
2009,ASTM,"D5853-09 Standard Test Method for Pour Point of Crude Oils"
2005,ASTM,"D5863-00a(2005) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2005,ASTM,"D5864-05 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components"
2007,ASTM,"D5950-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
2009,ASTM,"D5967-09 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2006,ASTM,"D5968-06 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121&#176;C"
2008,ASTM,"D5969-08 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2006,ASTM,"D5983-06 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D5984-97(2007) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration"
2008,ASTM,"D5985-02(2008) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)"
2006,ASTM,"D5986-96(2006) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf>-C<inf> 12</inf> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy"
2008,ASTM,"D6006-97a(2008) Standard Guide for Assessing Biodegradability of Hydraulic Fluids"
2006,ASTM,"D6021-06 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection"
2006,ASTM,"D6022-06 Standard Practice for Calculation of Permanent Shear Stability Index"
2006,ASTM,"D6046-02(2006) Standard Classification of Hydraulic Fluids for Environmental Impact"
2008,ASTM,"D6074-08 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils"
2004,ASTM,"D6078-04 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)"
2006,ASTM,"D6082-06 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
2007,ASTM,"D6120-97(2007) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature"
2007,ASTM,"D6138-07 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)"
2005,ASTM,"D6139-00(2005) Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask"
2007,ASTM,"D6159-97(2007) Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography"
2008,ASTM,"D6160-98(2008) Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography"
2005,ASTM,"D6184-98(2005) Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)"
2008,ASTM,"D6186-08 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)"
2007,ASTM,"D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis"
2006,ASTM,"D6203-06 Standard Test Method for Thermal Stability of Way Lubricants"
2009,ASTM,"D6224-09 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment"
2004,ASTM,"D6227-04a Standard Specification for Grade 82 Unleaded Aviation Gasoline"
2009,ASTM,"D6258-09 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels"
2007,ASTM,"D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy"
2007,ASTM,"D6278-07 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus"
2008,ASTM,"D6296-98(2008) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography"
2008,ASTM,"D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2007,ASTM,"D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration"
2007,ASTM,"D6334-07 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
2009,ASTM,"D6335-09 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test"
2009,ASTM,"D6352-04(2009) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
2006,ASTM,"D6353-06 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production"
2008,ASTM,"D6354-98(2008) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production"
2005,ASTM,"D6371-05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels"
2009,ASTM,"D6374-99(2009) Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
2009,ASTM,"D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method"
2008,ASTM,"D6378-08 Standard Test Method for Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2004,ASTM,"D6379-04 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates&#8212;High Performance Liquid Chromatography Method with Refractive Index Detection"
2005,ASTM,"D6384-99a(2005) Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
2009,ASTM,"D6417-09 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
2008,ASTM,"D6423-08 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)"
2007,ASTM,"D6426-07 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils"
2005,ASTM,"D6439-05 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems"
2006,ASTM,"D6446-01(2006) Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels"
2009,ASTM,"D6447-09 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis"
2009,ASTM,"D6448-09 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils"
2005,ASTM,"D6450-05 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
2008,ASTM,"D6468-08 Standard Test Method for High Temperature Stability of Middle Distillate Fuels"
2009,ASTM,"D4296-83(2009) Standard Practice for Sampling Pitch"
2009,ASTM,"D4683-09 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &#176;C"
2009,ASTM,"D4815-09 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography"
2009,ASTM,"D4893-94(2009) Standard Test Method for Determination of Pitch Volatility"
2009,ASTM,"D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement"
2009,ASTM,"D5274-00(2009) Standard Guide for Analysis of 1,3-Butadiene Product"
2009,ASTM,"D5600-09 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2009,ASTM,"D5709-09 Standard Test Method for Sieve Analysis of Petroleum Coke"
2009,ASTM,"D5760-09 Standard Specification for Performance of Manual Transmission Gear Lubricants"
2009,ASTM,"D5799-95(2009) Standard Test Method for Determination of Peroxides in Butadiene"
2009,ASTM,"D5842-04(2009) Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2009,ASTM,"D6045-09 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2009,ASTM,"D6081-98(2009) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation"
2009,ASTM,"D6121-09  Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2009,ASTM,"D6201-04(2009) Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2009,ASTM,"D6421-99a(2009) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure"
2010,ASTM,"D4177-95(2010) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2010,ASTM,"D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence  Spectrometry"
2010,ASTM,"D4307-99(2010) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards"
2010,ASTM,"D4308-95(2010) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
2010,ASTM,"D4312-95a(2010) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
2010,ASTM,"D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)"
2010,ASTM,"D4807-05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
2010,ASTM,"D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels"
2010,ASTM,"D5056-04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption"
2010,ASTM,"D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test"
2010,ASTM,"D5502-00(2010) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry"
2010,ASTM,"D5854-96(2010) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products"
2010,ASTM,"D5972-05(2010) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
2010,ASTM,"D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2010,ASTM,"D6443-04(2010) Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)"
2010,ASTM,"D4292-10 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke"
2010,ASTM,"D4310-10 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2010,ASTM,"D4423-10 Standard Test Method for Determination of Carbonyls In C<inf>4</inf> Hydrocarbons"
2010,ASTM,"D4485-10 Standard Specification for Performance of Engine Oils"
2010,ASTM,"D4629-10 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2010,ASTM,"D4806-10 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4814-10a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4863-10 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2010,ASTM,"D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&#8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy"
2010,ASTM,"D4928-00(2010) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration"
2010,ASTM,"D5001-10 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
2010,ASTM,"D5006-10 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
2010,ASTM,"D5188-10 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
2010,ASTM,"D5191-10a Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2007,ASTM,"D5236-03(2007) Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
2010,ASTM,"D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2010,ASTM,"D5293-10 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
2010,ASTM,"D5579-10 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2010,ASTM,"D5662-10  Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
2010,ASTM,"D5704-10 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2010,ASTM,"D5762-10 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2010,ASTM,"D5769-10 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry"
2010,ASTM,"D5771-10 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2010,ASTM,"D5772-10 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2010,ASTM,"D5773-10 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2010,ASTM,"D5798-10 Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines"
2010,ASTM,"D5800-10  Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2010,ASTM,"D5949-10 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)"
2010,ASTM,"D5966-10 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine"
2010,ASTM,"D6080-10 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2010,ASTM,"D6158-10 Standard Specification for Mineral Hydraulic Oils"
2010,ASTM,"D6185-10 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases"
2010,ASTM,"D6259-98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation"
2010,ASTM,"D6299-10 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2010,ASTM,"D6351-10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids"
2010,ASTM,"D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy"
2010,ASTM,"D6424-04a(2010) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2005,ASTM,"D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Redline)"
2010,ASTM,"D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Redline)"
2010,ASTM,"D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy (Redline)"
2005,ASTM,"D4177-95(2005) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2004,ASTM,"D4291-04 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil"
2007,ASTM,"D4292-92(2007) Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke"
2002,ASTM,"D4292-92(2002)e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke"
1997,ASTM,"D4292-92(1997) Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke"
2003,ASTM,"D4293-83(2003) Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication"
1998,ASTM,"D4293-83(1998) Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication"
2008,ASTM,"D4294-08ae1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence  Spectrometry"
2008,ASTM,"D4294-08a Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence  Spectrometry"
2008,ASTM,"D4294-08 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence  Spectrometry"
2003,ASTM,"D4294-03 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry"
2002,ASTM,"D4294-02 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy"
2004,ASTM,"D4296-83(2004) Standard Practice for Sampling Pitch"
1999,ASTM,"D4296-83(1999) Standard Practice for Sampling Pitch"
2006,ASTM,"D4304-06 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines"
2000,ASTM,"D4304-00 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines"
1999,ASTM,"D4304-99 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines"
2001,ASTM,"D4306-01 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
1997,ASTM,"D4306-97 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
2004,ASTM,"D4307-99(2004) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards"
1999,ASTM,"D4307-99 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards"
2010,ASTM,"D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
2005,ASTM,"D4308-95(2005) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
2000,ASTM,"D4308-95(2000)e1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
2000,ASTM,"D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
1995,ASTM,"D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter"
2009,ASTM,"D4310-09 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2006,ASTM,"D4310-06b Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2006,ASTM,"D4310-06a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2006,ASTM,"D4310-06 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2003,ASTM,"D4310-03 Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
1998,ASTM,"D4310-98 Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils"
2005,ASTM,"D4312-95a(2005) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
2000,ASTM,"D4312-95a(2000)e1 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
1995,ASTM,"D4312-95a Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
2011,ASTM,"D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration"
2000,ASTM,"D4377-00e1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration"
2000,ASTM,"D4377-00 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration"
2003,ASTM,"D4378-03 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines"
1997,ASTM,"D4378-97 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines"
2005,ASTM,"D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)"
2000,ASTM,"D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)"
1995,ASTM,"D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)"
2003,ASTM,"D4422-03 Standard Test Method for Ash in Analysis of Petroleum Coke"
1998,ASTM,"D4422-94(1998) Standard Test Method for Ash In Analysis of Petroleum Coke"
2001,ASTM,"D4424-90(2001)e1 Standard Test Method for Butylene Analysis by Gas Chromatography"
1995,ASTM,"D4424-90(1995) Standard Test Method for Butylene Analysis by Gas Chromatography"
2002,ASTM,"D4425-97(2002) Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)"
1997,ASTM,"D4425-97 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)"
2011,ASTM,"D4485-11b Standard Specification for Performance of Active API Service Category Engine Oils"
2011,ASTM,"D4485-11a Standard Specification for Performance of Active API Service Category Engine Oils"
2011,ASTM,"D4485-11 Standard Specification for Performance of Engine Oils"
2010,ASTM,"D4485-10a Standard Specification for Performance of Engine Oils"
2009,ASTM,"D4485-09 Standard Specification for Performance of Engine Oils"
2008,ASTM,"D4485-08 Standard Specification for Performance of Engine Oils"
2007,ASTM,"D4485-07a Standard Specification for Performance of Engine Oils"
2007,ASTM,"D4485-07 Standard Specification for Performance of Engine Oils"
2006,ASTM,"D4485-06a Standard Specification for Performance of Engine Oils"
2006,ASTM,"D4485-06 Standard Specification for Performance of Engine Oils"
2005,ASTM,"D4485-05e1 Standard Specification for Performance of Engine Oils"
2005,ASTM,"D4485-05a Standard Specification for Performance of Engine Oils"
2005,ASTM,"D4485-05 Standard Specification for Performance of Engine Oils"
2004,ASTM,"D4485-04 Standard Specification for Performance of Engine Oils"
2003,ASTM,"D4485-03a Standard Specification for Performance of Engine Oils"
2003,ASTM,"D4485-03 Standard Specification for Performance of Engine Oils"
2002,ASTM,"D4485-02 Standard Specification for Performance of Engine Oils"
2001,ASTM,"D4485-01 Standard Specification for Performance of Engine Oils"
2000,ASTM,"D4485-00 Standard Specification for Performance of Engine Oils"
2010,ASTM,"D4486-91(2010) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2001,ASTM,"D4486-91(2001) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
1996,ASTM,"D4486-91(1996)e1 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2001,ASTM,"D4529-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels"
1995,ASTM,"D4529-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels"
2011,ASTM,"D4530-11 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2006,ASTM,"D4530-06e1 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2006,ASTM,"D4530-06 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2003,ASTM,"D4530-03 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2000,ASTM,"D4530-00 Standard Test Method for Determination of Carbon Residue (Micro Method)"
2010,ASTM,"D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
2003,ASTM,"D4539-03e1 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
2003,ASTM,"D4539-03 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
2002,ASTM,"D4539-02 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
2005,ASTM,"D4616-95(2005) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch"
2000,ASTM,"D4616-95(2000) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch"
1995,ASTM,"D4616-95 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch"
2004,ASTM,"D4625-04 Standard Test Method for Distillate Fuel Storage Stability at 43&#176;C (110&#176;F)"
2003,ASTM,"D4625-03 Standard Test Method for Distillate Fuel Storage Stability at 43&#176;C (110&#176;F)"
1998,ASTM,"D4625-92(1998) Standard Test Method for Distillate Fuel Storage Stability at 43&#176;C (110&#176;F)"
2010,ASTM,"D4626-95(2010) Standard Practice for Calculation of Gas Chromatographic Response Factors"
2000,ASTM,"D4626-95(2000) Standard Practice for Calculation of Gas Chromatographic Response Factors"
2002,ASTM,"D4627-92(2002) Standard Test Method for Iron Chip Corrosion for Water&#8212;Dilutable Metalworking Fluids"
1997,ASTM,"D4627-92(1997) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids"
2011,ASTM,"D4628-05(2011)e1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry"
2002,ASTM,"D4628-02 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry"
1997,ASTM,"D4628-97 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry"
2009,ASTM,"D4629-09 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2008,ASTM,"D4629-08 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2007,ASTM,"D4629-02(2007) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2002,ASTM,"D4629-02 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
1996,ASTM,"D4629-96 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2009,ASTM,"D4636-09 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils"
2004,ASTM,"D4636-99(2004)e1 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils"
1999,ASTM,"D4636-99 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils"
2002,ASTM,"D4682-87(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2010,ASTM,"D4683-10 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &#176;C"
2004,ASTM,"D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator"
1996,ASTM,"D4683-96 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator"
2007,ASTM,"D4684-07e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
2007,ASTM,"D4684-07 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
2002,ASTM,"D4684-02a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
2002,ASTM,"D4684-02 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
1999,ASTM,"D4684-99e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature"
2003,ASTM,"D4693-03 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2002,ASTM,"D4693-97(2002)e1 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2008,ASTM,"D4715-98(2008)e1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)"
2003,ASTM,"D4715-98(2003) Standard Test Method for Coking Value of Tar and Pitch (Alcan)"
1998,ASTM,"D4715-98 Standard Test Method for Coking Value of Tar and Pitch (Alcan)"
2010,ASTM,"D4737-10 Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2009,ASTM,"D4737-09a Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2004,ASTM,"D4737-04 Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2003,ASTM,"D4737-03 Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2001,ASTM,"D4737-96a(2001) Standard Test Method for Calculated Cetane Index by Four Variable Equation"
1996,ASTM,"D4737-96a Standard Test Method for Calculated Cetane Index by Four Variable Equation"
2011,ASTM,"D4739-11 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration"
2008,ASTM,"D4739-08e1 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration"
2008,ASTM,"D4739-08 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration"
2006,ASTM,"D4739-06a Standard Test Method for Base Number Determination by Potentiometric Titration"
2006,ASTM,"D4739-06 Standard Test Method for Base Number Determination by Potentiometric Titration"
2005,ASTM,"D4739-05 Standard Test Method for Base Number Determination by Potentiometric Titration"
2002,ASTM,"D4739-02 Standard Test Method for Base Number Determination by Potentiometric Titration"
1996,ASTM,"D4739-96 Standard Test Method for Base Number Determination by Potentiometric Titration"
2004,ASTM,"D4740-04 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2002,ASTM,"D4740-02 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
1995,ASTM,"D4740-95 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2000,ASTM,"D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer"
1996,ASTM,"D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer"
2008,ASTM,"D4742-08e1 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)"
2008,ASTM,"D4742-08 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)"
2002,ASTM,"D4742-02a Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)"
1996,ASTM,"D4742-96 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)"
2003,ASTM,"D4746-98(2003)e1 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration"
1998,ASTM,"D4746-98 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration"
2011,ASTM,"D4806-11a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2011,ASTM,"D4806-11 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4806-10b Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4806-10a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2009,ASTM,"D4806-09 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2008,ASTM,"D4806-08a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2008,ASTM,"D4806-08 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D4806-07a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D4806-07 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4806-06c Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4806-06b Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4806-06a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4806-06 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4806-04a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4806-04 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2003,ASTM,"D4806-03 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2002,ASTM,"D4806-02 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2001,ASTM,"D4806-01a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2001,ASTM,"D4806-01 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
1999,ASTM,"D4806-99 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel"
2005,ASTM,"D4807-05e1 Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
2005,ASTM,"D4807-05 Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
1999,ASTM,"D4807-88(1999) Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
2001,ASTM,"D4808-01 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy"
1998,ASTM,"D4808-98 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy"
2009,ASTM,"D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2006,ASTM,"D4809-06 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2005,ASTM,"D4809-00(2005) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2000,ASTM,"D4809-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
1995,ASTM,"D4809-95 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2011,ASTM,"D4814-11a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2011,ASTM,"D4814-11 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4814-10b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2010,ASTM,"D4814-10 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2009,ASTM,"D4814-09b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2009,ASTM,"D4814-09a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2009,ASTM,"D4814-09 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2008,ASTM,"D4814-08b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2008,ASTM,"D4814-08a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2008,ASTM,"D4814-08 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D4814-07b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D4814-07a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2007,ASTM,"D4814-07 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4814-06a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2006,ASTM,"D4814-06 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4814-04be1 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4814-04b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4814-04a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2004,ASTM,"D4814-04 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2003,ASTM,"D4814-03a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2003,ASTM,"D4814-03 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2002,ASTM,"D4814-02 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2001,ASTM,"D4814-01a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2001,ASTM,"D4814-01 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2000,ASTM,"D4814-00a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2000,ASTM,"D4814-00 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2003,ASTM,"D4857-03 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2002,ASTM,"D4857-02 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2001,ASTM,"D4857-01a Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2001,ASTM,"D4857-01 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2000,ASTM,"D4857-00 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards"
2002,ASTM,"D4858-02 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines"
2000,ASTM,"D4858-00 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines"
2003,ASTM,"D4859-97(2003) Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC"
1997,ASTM,"D4859-97 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC"
2007,ASTM,"D4860-07 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)"
2005,ASTM,"D4860-91(2005) Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)"
2000,ASTM,"D4860-91(2000)e1 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)"
1995,ASTM,"D4860-91(1995) Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)"
2008,ASTM,"D4863-08 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2002,ASTM,"D4863-02 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2000,ASTM,"D4863-00 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants"
2000,ASTM,"D4864-90(2000)e1 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography"
2003,ASTM,"D4865-98(2003)e1 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems"
1998,ASTM,"D4865-98 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems"
2005,ASTM,"D4868-00(2005) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels"
2000,ASTM,"D4868-00 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels"
1995,ASTM,"D4868-90(1995)e1 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels"
2007,ASTM,"D4870-07a Standard Test Method for Determination of Total Sediment in Residual Fuels"
2007,ASTM,"D4870-07 Standard Test Method for Determination of Total Sediment in Residual Fuels"
2004,ASTM,"D4870-04 Standard Test Method for Determination of Total Sediment in Residual Fuels"
1999,ASTM,"D4870-99 Standard Test Method for Determination of Total Sediment in Residual Fuels"
2000,ASTM,"D4871-00 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus"
2004,ASTM,"D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)"
1999,ASTM,"D4892-89(1999)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)"
2004,ASTM,"D4893-94(2004) Standard Test Method for Determination of Pitch Volatility"
1999,ASTM,"D4893-94(1999) Standard Test Method for Determination of Pitch Volatility"
2010,ASTM,"D4898-90(2010)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis"
2010,ASTM,"D4898-90(2010) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis"
2000,ASTM,"D4898-90(2000)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis"
2005,ASTM,"D4927-05 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&#8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy"
2002,ASTM,"D4927-02 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&#8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy"
2001,ASTM,"D4927-01 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&#8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy"
1996,ASTM,"D4927-96 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&#8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy"
2011,ASTM,"D4928-11 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration"
2000,ASTM,"D4928-00e1 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration"
2005,ASTM,"D4928-00(2005) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration"
2000,ASTM,"D4928-00 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration"
2004,ASTM,"D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil"
1999,ASTM,"D4929-99e1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil"
1999,ASTM,"D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil"
2011,ASTM,"D4930-06(2011) Standard Test Method for Dust Control Material on Calcined Petroleum Coke"
2004,ASTM,"D4930-94(2004)e1 Standard Test Method for Dust Control Material on Calcined Petroleum Coke"
1999,ASTM,"D4930-94(1999) Standard Test Method for Dust Control Material on Calcined Petroleum Coke"
2011,ASTM,"D4931-06(2011) Standard Test Method for Gross Moisture in Green Petroleum Coke"
2002,ASTM,"D4931-92(2002) Standard Test Method for Gross Moisture in Green Petroleum Coke"
1997,ASTM,"D4931-92(1997) Standard Test Method for Gross Moisture in Green Petroleum Coke"
2004,ASTM,"D4950-01(2004)e1 Standard Classification and Specification of Automotive Service Greases"
2001,ASTM,"D4950-01 Standard Classification and Specification of Automotive Service Greases"
2000,ASTM,"D4950-95(2000)e1 Standard Classification and Specification of Automotive Service Greases"
2006,ASTM,"D4951-06 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
2002,ASTM,"D4951-02 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
2000,ASTM,"D4951-00 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
2007,ASTM,"D4952-02(2007) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)"
2002,ASTM,"D4952-02 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)"
1997,ASTM,"D4952-97 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)"
1999,ASTM,"D4953-99a Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)"
2003,ASTM,"D4998-95(2003)e1 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids"
1995,ASTM,"D4998-95 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids"
2005,ASTM,"D5000-89(2005) Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor"
2000,ASTM,"D5000-89(2000) Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor"
1995,ASTM,"D5000-89(1995)e1 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor"
2008,ASTM,"D5001-08 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
2006,ASTM,"D5001-06 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
2003,ASTM,"D5001-03 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
2000,ASTM,"D5001-90a(2000)e1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
1995,ASTM,"D5001-90a(1995)e1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)"
2010,ASTM,"D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer"
1999,ASTM,"D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer"
2011,ASTM,"D5003-06a(2011) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke"
2006,ASTM,"D5003-06 Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke"
2005,ASTM,"D5003-95(2005) Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke"
2000,ASTM,"D5003-95(2000)e1 Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke"
2011,ASTM,"D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement"
2004,ASTM,"D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement"
1999,ASTM,"D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement"
2011,ASTM,"D5006-11 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
2011,ASTM,"D5006-11 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels (Redline)"
2010,ASTM,"D5006-10e1 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
2003,ASTM,"D5006-03 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
2002,ASTM,"D5006-02 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
1996,ASTM,"D5006-96 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
2004,ASTM,"D5018-89(2004) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches"
1999,ASTM,"D5018-89(1999)e1 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches"
2004,ASTM,"D5056-04 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption"
2002,ASTM,"D5056-02 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption"
1996,ASTM,"D5056-96 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption"
2003,ASTM,"D5059-98(2003)e1 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
1998,ASTM,"D5059-98 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
2011,ASTM,"D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique"
2001,ASTM,"D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique"
1999,ASTM,"D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique"
2008,ASTM,"D5134-98(2008)e1 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography"
2003,ASTM,"D5134-98(2003) Standard Test Method for Detailed Analysis of Petroleum Naphthas through <i>n</i>-Nonane by Capillary Gas Chromatography"
1998,ASTM,"D5134-98 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography"
2005,ASTM,"D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test"
2003,ASTM,"D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test"
1997,ASTM,"D5182-97e1 Standard Test Method for Evaluating the Scuffing  Load Capacity of Oils (FZG Visual Method)"
2002,ASTM,"D5182-97(2002)e1 Standard Test Method for Evaluating the Scuffing  Load Capacity of Oils (FZG Visual Method)"
2011,ASTM,"D5183-05(2011) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine"
1999,ASTM,"D5183-95(1999)e1 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine"
2001,ASTM,"D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry"
2000,ASTM,"D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry"
2005,ASTM,"D5185-05 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2002,ASTM,"D5185-02e2 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2002,ASTM,"D5185-02e1 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2002,ASTM,"D5185-02 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
1997,ASTM,"D5185-97 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2003,ASTM,"D5186-03 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography"
1999,ASTM,"D5186-99 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography"
2010,ASTM,"D5188-10a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
2009,ASTM,"D5188-09 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
2004,ASTM,"D5188-04a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
2004,ASTM,"D5188-04 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
1999,ASTM,"D5188-99 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)"
2001,ASTM,"D5190-01 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)"
1999,ASTM,"D5190-99 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)"
2010,ASTM,"D5191-10b Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2010,ASTM,"D5191-10 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2007,ASTM,"D5191-07 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2006,ASTM,"D5191-06e1 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2006,ASTM,"D5191-06 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2004,ASTM,"D5191-04a Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2003,ASTM,"D5191-03 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2002,ASTM,"D5191-02 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2001,ASTM,"D5191-01 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
1999,ASTM,"D5191-99 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2002,ASTM,"D5234-92(2002) Standard Guide for Analysis of Ethylene Product"
1997,ASTM,"D5234-92(1997) Standard Guide for Analysis of Ethylene Product"
2003,ASTM,"D5236-03 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
2002,ASTM,"D5236-02 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
1999,ASTM,"D5236-99ae1 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
2002,ASTM,"D5273-92(2002) Standard Guide for Analysis of Propylene Concentrates"
1997,ASTM,"D5273-92(1997) Standard Guide for Analysis of Propylene Concentrates"
2005,ASTM,"D5274-00(2005) Standard Guide for Analysis of 1,3-Butadiene Product"
2000,ASTM,"D5274-00 Standard Guide for Analysis of 1,3-Butadiene Product"
1997,ASTM,"D5274-92(1997) Standard Guide for Analysis of 1,3-Butadiene Product"
2011,ASTM,"D5275-11 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids"
1998,ASTM,"D5275-92(1998)e1 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids"
2009,ASTM,"D5291-09 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2007,ASTM,"D5291-02(2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2002,ASTM,"D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
1996,ASTM,"D5291-96 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2004,ASTM,"D5292-99(2004)e1 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy"
2004,ASTM,"D5292-99(2004) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy"
1999,ASTM,"D5292-99 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy"
2010,ASTM,"D5293-10e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &ndash;5 and &ndash;35&#176;C Using Cold-Cranking Simulator"
2009,ASTM,"D5293-09 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
2008,ASTM,"D5293-08e1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
2008,ASTM,"D5293-08 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
2004,ASTM,"D5293-04 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
2002,ASTM,"D5293-02 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&#176;C Using the Cold-Cranking Simulator"
1999,ASTM,"D5293-99ae1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35<sup>o</sup>C Using the Cold-Cranking Simulator"
2002,ASTM,"D5303-92(2002)e1 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
1997,ASTM,"D5303-92(1997) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
2011,ASTM,"D5304-11 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure"
2005,ASTM,"D5304-05 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure"
2003,ASTM,"D5304-03 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure"
2002,ASTM,"D5304-02a Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure"
2002,ASTM,"D5304-02 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure"
1997,ASTM,"D5305-97 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2002,ASTM,"D5306-92(2002)e1 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids"
1997,ASTM,"D5306-92(1997) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids"
2004,ASTM,"D5372-04 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids"
1998,ASTM,"D5372-93(1998) Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids"
2011,ASTM,"D5384-11 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)"
2000,ASTM,"D5384-95(2000)e1 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)"
2008,ASTM,"D5441-98(2008)e1 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
2003,ASTM,"D5441-98(2003)e1 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
1998,ASTM,"D5441-98 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
1993,ASTM,"D5441-93 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
2003,ASTM,"D5442-93(2003)e1 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography"
1998,ASTM,"D5442-93(1998) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography"
2009,ASTM,"D5443-04(2009)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200&#176;C by Multi-Dimensional Gas Chromatography"
2004,ASTM,"D5443-04 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200&#176;C by Multi-Dimensional Gas Chromatography"
2003,ASTM,"D5443-93(2003)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200&#176;C by Multi-Dimensional Gas Chromatography"
1998,ASTM,"D5443-93(1998) Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200&#176;C by Multi-Dimensional Gas Chromatography"
2006,ASTM,"D5452-06 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2005,ASTM,"D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2000,ASTM,"D5452-00 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2008,ASTM,"D5453-08b Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence"
2008,ASTM,"D5453-08a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence"
2008,ASTM,"D5453-08 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence"
2006,ASTM,"D5453-06 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence"
2005,ASTM,"D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2004,ASTM,"D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2003,ASTM,"D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2003,ASTM,"D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2000,ASTM,"D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2000,ASTM,"D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence"
2010,ASTM,"D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer"
2001,ASTM,"D5481-96(2001) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer"
1996,ASTM,"D5481-96 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer"
2001,ASTM,"D5482-01 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)"
1999,ASTM,"D5482-99 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)"
2010,ASTM,"D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry"
2002,ASTM,"D5483-02e1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry"
2002,ASTM,"D5483-02 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry"
1995,ASTM,"D5483-95 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry"
2003,ASTM,"D5500-98(2003)e1 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
1998,ASTM,"D5500-98 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2004,ASTM,"D5501-04 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography"
1998,ASTM,"D5501-94(1998)e1 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography"
2005,ASTM,"D5502-00(2005) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry"
2000,ASTM,"D5502-00 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry"
2011,ASTM,"D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids"
1999,ASTM,"D5534-94(1999) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids"
2010,ASTM,"D5579-10a Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2009,ASTM,"D5579-09a Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2009,ASTM,"D5579-09 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2006,ASTM,"D5579-06 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2005,ASTM,"D5579-05 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2004,ASTM,"D5579-04 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2003,ASTM,"D5579-03 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2001,ASTM,"D5579-01 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2000,ASTM,"D5579-00 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2010,ASTM,"D5599-00(2010) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection"
2000,ASTM,"D5599-00 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection"
2004,ASTM,"D5600-04e1 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2004,ASTM,"D5600-04 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2003,ASTM,"D5600-98(2003) Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
1998,ASTM,"D5600-98 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)"
2011,ASTM,"D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine"
2000,ASTM,"D5619-00 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine"
2001,ASTM,"D5621-01 Standard Test Method for Sonic Shear Stability of Hydraulic Fluid"
1994,ASTM,"D5621-94 Standard Test Method for Sonic Shear Stability of Hydraulic Fluid"
2011,ASTM,"D5622-95(2011) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis"
2000,ASTM,"D5622-95(2000) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis"
2004,ASTM,"D5623-94(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection"
1999,ASTM,"D5623-94(1999)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection"
2009,ASTM,"D5662-09  Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
2008,ASTM,"D5662-08a  Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
2008,ASTM,"D5662-08  Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
2006,ASTM,"D5662-06a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
2006,ASTM,"D5662-06 Standard Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers"
1999,ASTM,"D5662-99 Standard Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers"
2011,ASTM,"D5704-11 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2009,ASTM,"D5704-09 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2008,ASTM,"D5704-08 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2007,ASTM,"D5704-07 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2005,ASTM,"D5704-05b Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2005,ASTM,"D5704-05a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2005,ASTM,"D5704-05 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2004,ASTM,"D5704-04a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2004,ASTM,"D5704-04 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2003,ASTM,"D5704-03a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2003,ASTM,"D5704-03 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2000,ASTM,"D5704-00a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2003,ASTM,"D5705-03 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils"
2000,ASTM,"D5705-95(2000)e1 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils"
2011,ASTM,"D5706-05(2011)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine"
2002,ASTM,"D5706-97(2002)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine"
1997,ASTM,"D5706-97 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine"
2011,ASTM,"D5707-05(2011)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2003,ASTM,"D5707-98(2003)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
1998,ASTM,"D5707-98 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2011,ASTM,"D5708-11 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry"
2002,ASTM,"D5708-02 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry"
2000,ASTM,"D5708-00 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry"
2005,ASTM,"D5709-95(2005) Standard Test Method for Sieve Analysis of Petroleum Coke"
2000,ASTM,"D5709-95(2000)e1 Standard Test Method for Sieve Analysis of Petroleum Coke"
2005,ASTM,"D5760-05 Standard Specification for Performance of Manual Transmission Gear Lubricants"
1995,ASTM,"D5760-95e1 Standard Specification for Performance of Manual Transmission Gear Lubricants"
2001,ASTM,"D5761-96(2001) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials"
1996,ASTM,"D5761-96 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials"
2011,ASTM,"D5762-11 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2009,ASTM,"D5762-09 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2008,ASTM,"D5762-08 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2005,ASTM,"D5762-05 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2002,ASTM,"D5762-02 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2001,ASTM,"D5762-01 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
1998,ASTM,"D5762-98 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2006,ASTM,"D5763-95(2006)e1 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware"
2006,ASTM,"D5763-95(2006) Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware"
2001,ASTM,"D5763-95(2001) Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware"
1995,ASTM,"D5763-95 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware"
2004,ASTM,"D5769-04 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry"
1998,ASTM,"D5769-98 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry"
2011,ASTM,"D5770-11 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating  Oils During Oxidation Testing"
2002,ASTM,"D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of  Lubricating Oils During Oxidation Testing"
1996,ASTM,"D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of  Lubricating Oils During Oxidation Testing"
2005,ASTM,"D5771-05 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2004,ASTM,"D5771-04 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2003,ASTM,"D5771-03 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2002,ASTM,"D5771-02 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2005,ASTM,"D5772-05 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2004,ASTM,"D5772-04 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2002,ASTM,"D5772-02 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2007,ASTM,"D5773-07 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2005,ASTM,"D5773-05 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2004,ASTM,"D5773-04 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2003,ASTM,"D5773-03 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2002,ASTM,"D5773-02 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2006,ASTM,"D5797-06 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
2001,ASTM,"D5797-96(2001) Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
1996,ASTM,"D5797-96 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
2011,ASTM,"D5798-11 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines"
2010,ASTM,"D5798-10a Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines"
0,ASTM,"D5798-09B Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2009,ASTM,"D5798-09a Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2009,ASTM,"D5798-09 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2007,ASTM,"D5798-07 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2006,ASTM,"D5798-06 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
1999,ASTM,"D5798-99 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2004,ASTM,"D5799-95(2004) Standard Test Method for Determination of Peroxides in Butadiene"
2000,ASTM,"D5799-95(2000)e1 Standard Test Method for Determination of Peroxides in Butadiene"
1995,ASTM,"D5799-95 Standard Test Method for Determination of Peroxides in Butadiene"
2008,ASTM,"D5800-08  Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2005,ASTM,"D5800-05 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2004,ASTM,"D5800-04a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2004,ASTM,"D5800-04 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2003,ASTM,"D5800-03a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2003,ASTM,"D5800-03 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2000,ASTM,"D5800-00ae1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2000,ASTM,"D5800-00a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method"
2004,ASTM,"D5842-04 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2000,ASTM,"D5842-95(2000) Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2011,ASTM,"D5845-01(2011) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and  tert-Butanol in Gasoline by Infrared Spectroscopy"
2001,ASTM,"D5845-01 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and <i>tert-</i>Butanol in Gasoline by Infrared Spectroscopy"
2000,ASTM,"D5845-95(2000)e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and <i>tert-</i>Butanol in Gasoline by Infrared Spectroscopy"
2002,ASTM,"D5846-02 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus"
1999,ASTM,"D5846-99 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus"
2011,ASTM,"D5853-11 Standard Test Method for Pour Point of Crude Oils"
2006,ASTM,"D5853-06 Standard Test Method for Pour Point of Crude Oils"
2000,ASTM,"D5853-95(2000)e1 Standard Test Method for Pour Point of Crude Oils"
1995,ASTM,"D5853-95 Standard Test Method for Pour Point of Crude Oils"
2005,ASTM,"D5854-96(2005) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products"
2000,ASTM,"D5854-96(2000) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products"
2011,ASTM,"D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2000,ASTM,"D5863-00a Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2000,ASTM,"D5863-00 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2011,ASTM,"D5864-11 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components"
2000,ASTM,"D5864-00 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components"
1995,ASTM,"D5864-95 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components"
2008,ASTM,"D5949-08 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)"
2001,ASTM,"D5949-01e1 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)"
2001,ASTM,"D5949-01 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)"
1996,ASTM,"D5949-96 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)"
2002,ASTM,"D5950-02 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
1996,ASTM,"D5950-96 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
2009,ASTM,"D5966-09 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine"
2008,ASTM,"D5966-08 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine"
2002,ASTM,"D5966-02 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine"
1999,ASTM,"D5966-99 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine"
2011,ASTM,"D5967-11 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2010,ASTM,"D5967-10a Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2010,ASTM,"D5967-10 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2008,ASTM,"D5967-08 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2005,ASTM,"D5967-05 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2004,ASTM,"D5967-04 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2003,ASTM,"D5967-03 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
1999,ASTM,"D5967-99a Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2004,ASTM,"D5968-04 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121&#176;C"
2001,ASTM,"D5968-01 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121&#176;C"
2000,ASTM,"D5968-00a Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121&#176;C"
2011,ASTM,"D5969-11 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2005,ASTM,"D5969-05e2 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2005,ASTM,"D5969-05e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2005,ASTM,"D5969-05 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2002,ASTM,"D5969-02 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
1996,ASTM,"D5969-96 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2005,ASTM,"D5972-05e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
2005,ASTM,"D5972-05 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
2002,ASTM,"D5972-02e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
2002,ASTM,"D5972-02 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
1999,ASTM,"D5972-99ae1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
1999,ASTM,"D5972-99a Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)"
2011,ASTM,"D5983-06(2011) Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel"
2002,ASTM,"D5983-97(2002) Standard Specification for Methyl <i>Tertiary</i>-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel"
2011,ASTM,"D5984-11 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration"
1997,ASTM,"D5984-97 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration"
2002,ASTM,"D5985-02 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)"
1996,ASTM,"D5985-96e1 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)"
2011,ASTM,"D6006-11 Standard Guide for Assessing Biodegradability of Hydraulic Fluids"
2003,ASTM,"D6006-97a(2003) Standard Guide for Assessing Biodegradability of Hydraulic Fluids"
1997,ASTM,"D6006-97a Standard Guide for Assessing Biodegradability of Hydraulic Fluids"
2001,ASTM,"D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection"
2001,ASTM,"D6022-01 Standard Practice for Calculation of Permanent Shear Stability Index"
2004,ASTM,"D6045-04 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2002,ASTM,"D6045-02 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
1996,ASTM,"D6045-96 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2002,ASTM,"D6046-02 Standard Classification of Hydraulic Fluids for Environmental Impact"
1998,ASTM,"D6046-98a Standard Classification of Hydraulic Fluids for Environmental Impact"
2005,ASTM,"D6074-99(2005) Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils"
1999,ASTM,"D6074-99 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils"
2010,ASTM,"D6078-04(2010) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)"
1999,ASTM,"D6078-99 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)"
2011,ASTM,"D6079-11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)"
2004,ASTM,"D6079-04e1 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)"
2004,ASTM,"D6079-04 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)"
2002,ASTM,"D6079-02 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)"
1999,ASTM,"D6079-99 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)"
2007,ASTM,"D6080-97(2007) Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2002,ASTM,"D6080-97(2002) Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
1997,ASTM,"D6080-97 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2004,ASTM,"D6081-98(2004) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation"
1998,ASTM,"D6081-98 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation"
2011,ASTM,"D6082-11 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
2001,ASTM,"D6082-01 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
2000,ASTM,"D6082-00 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
1997,ASTM,"D6082-97 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
2011,ASTM,"D6121-11 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2010,ASTM,"D6121-10  Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2008,ASTM,"D6121-08b  Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2008,ASTM,"D6121-08a  Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2008,ASTM,"D6121-08 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2006,ASTM,"D6121-06a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2006,ASTM,"D6121-06 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2005,ASTM,"D6121-05a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2005,ASTM,"D6121-05 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2004,ASTM,"D6121-04 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2003,ASTM,"D6121-03a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2003,ASTM,"D6121-03 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2002,ASTM,"D6121-02 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2001,ASTM,"D6121-01 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2000,ASTM,"D6121-00 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2009,ASTM,"D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers"
2006,ASTM,"D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers"
2001,ASTM,"D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers"
1999,ASTM,"D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers"
2011,ASTM,"D6138-11 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)"
2003,ASTM,"D6138-03 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)"
1997,ASTM,"D6138-97 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)"
2011,ASTM,"D6139-11 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask"
2000,ASTM,"D6139-00 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask"
2005,ASTM,"D6158-05 Standard Specification for Mineral Hydraulic Oils"
1999,ASTM,"D6158-99 Standard Specification for Mineral Hydraulic Oils"
2002,ASTM,"D6159-97(2002) Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography"
1997,ASTM,"D6159-97 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography"
2003,ASTM,"D6160-98(2003)e1 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography"
1998,ASTM,"D6160-98 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography"
1998,ASTM,"D6184-98 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)"
2008,ASTM,"D6185-97(2008) Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases"
2002,ASTM,"D6185-97(2002)e1 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases"
1997,ASTM,"D6185-97 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases"
1998,ASTM,"D6186-98 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)"
2001,ASTM,"D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis"
2000,ASTM,"D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis"
2004,ASTM,"D6201-04 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2003,ASTM,"D6201-03 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2001,ASTM,"D6201-01 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2000,ASTM,"D6201-00 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2001,ASTM,"D6203-97(2001) Standard Test Method for Thermal Stability of Way Lubricants"
1997,ASTM,"D6203-97 Standard Test Method for Thermal Stability of Way Lubricants"
2011,ASTM,"D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration"
2010,ASTM,"D6217-10 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration"
2003,ASTM,"D6217-98(2003)e1 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration"
1998,ASTM,"D6217-98 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration"
2002,ASTM,"D6224-02 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment"
1998,ASTM,"D6224-98 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment"
2010,ASTM,"D6227-10 Standard Specification for Grades UL82 and UL87 Unleaded Aviation Gasoline"
2004,ASTM,"D6227-04 Standard Specification for Grade 82 Unleaded Aviation Gasoline"
2000,ASTM,"D6227-00 Standard Specification for Grade 82 Unleaded Aviation Gasoline"
1999,ASTM,"D6227-99 Standard Specification for Grade 82 Unleaded Aviation Gasoline"
2004,ASTM,"D6258-04 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels"
1998,ASTM,"D6258-98e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels"
2003,ASTM,"D6258-98(2003)e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels"
2004,ASTM,"D6259-98(2004) Standard Practice for Determination of a Pooled Limit of Quantitation"
1998,ASTM,"D6259-98 Standard Practice for Determination of a Pooled Limit of Quantitation"
2006,ASTM,"D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy"
2001,ASTM,"D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy"
1999,ASTM,"D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy"
2002,ASTM,"D6278-02 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus"
1998,ASTM,"D6278-98 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus"
2003,ASTM,"D6296-98(2003)e1 Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography"
1998,ASTM,"D6296-98 Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography"
2010,ASTM,"D6299-10e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2009,ASTM,"D6299-09 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2008,ASTM,"D6299-08 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2007,ASTM,"D6299-07e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2007,ASTM,"D6299-07 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2002,ASTM,"D6299-02e1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance"
2002,ASTM,"D6299-02 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance"
2000,ASTM,"D6299-00 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance"
2007,ASTM,"D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2006,ASTM,"D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2004,ASTM,"D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2003,ASTM,"D6300-03 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2002,ASTM,"D6300-02 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2004,ASTM,"D6304-04e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2004,ASTM,"D6304-04ae1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2004,ASTM,"D6304-04a Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2004,ASTM,"D6304-04 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2003,ASTM,"D6304-03 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2000,ASTM,"D6304-00 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration"
2003,ASTM,"D6334-98(2003)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
1998,ASTM,"D6334-98 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
2003,ASTM,"D6335-03b Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test"
2003,ASTM,"D6335-03a Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test"
2003,ASTM,"D6335-03 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test"
1998,ASTM,"D6335-98 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test"
2005,ASTM,"D6351-99(2005) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids"
1999,ASTM,"D6351-99 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids"
2004,ASTM,"D6352-04e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
2004,ASTM,"D6352-04 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
2003,ASTM,"D6352-03 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
2002,ASTM,"D6352-02 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
1998,ASTM,"D6352-98 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176;C by Gas Chromatography"
2011,ASTM,"D6353-06(2011) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production"
2003,ASTM,"D6353-98(2003) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production"
1998,ASTM,"D6353-98 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production"
2003,ASTM,"D6354-98(2003) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production"
1998,ASTM,"D6354-98 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production"
2010,ASTM,"D6371-05(2010) Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels"
1999,ASTM,"D6371-99 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels"
2004,ASTM,"D6374-99(2004) Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
1999,ASTM,"D6374-99 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
2005,ASTM,"D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method"
1999,ASTM,"D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method"
2009,ASTM,"D6376-09 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy"
2006,ASTM,"D6376-06 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy"
2005,ASTM,"D6376-05 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy"
1999,ASTM,"D6376-99 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy"
1999,ASTM,"D6379-99 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection"
2011,ASTM,"D6384-11 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
1999,ASTM,"D6384-99ae1 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
2003,ASTM,"D6417-03 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
2002,ASTM,"D6417-02 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
1999,ASTM,"D6417-99 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
2004,ASTM,"D6421-99a(2004) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure"
1999,ASTM,"D6421-99a Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure"
2004,ASTM,"D6423-99(2004) Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)"
1999,ASTM,"D6423-99 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)"
2010,ASTM,"D6425-05(2010)e1 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine"
2005,ASTM,"D6425-05 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine"
2002,ASTM,"D6425-02 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating  Oils Using SRV Test Machine"
1999,ASTM,"D6425-99 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating  Oils Using SRV Test Machine"
2004,ASTM,"D6426-04 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils"
2002,ASTM,"D6426-02a Standard Test Method for Determining Filterability of Distillate Fuel Oils"
2002,ASTM,"D6426-02 Standard Test Method for Determining Filterability of Distillate Fuel Oils"
1999,ASTM,"D6426-99 Standard Test Method for Determining Filterability of Distillate Fuel Oils"
2011,ASTM,"D6439-11 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems"
1999,ASTM,"D6439-99 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems"
2004,ASTM,"D6443-04 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)"
1999,ASTM,"D6443-99 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)"
2001,ASTM,"D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels"
1999,ASTM,"D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels"
2003,ASTM,"D6447-03 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis"
1999,ASTM,"D6447-99 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis"
2004,ASTM,"D6448-04 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils"
1999,ASTM,"D6448-99 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils"
2010,ASTM,"D6450-05(2010) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
1999,ASTM,"D6450-99 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
2006,ASTM,"D6468-06 Standard Test Method for High Temperature Stability of Distillate Fuels"
2004,ASTM,"D6468-99(2004) Standard Test Method for High Temperature Stability of Distillate Fuels"
1999,ASTM,"D6468-99 Standard Test Method for High Temperature Stability of Distillate Fuels"
2011,ASTM,"D4418-00(2011) Standard Practice for Receipt, Storage, and Handling of Fuels for<br />  Gas Turbines"
2000,ASTM,"D4418-00 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines"
1998,ASTM,"D4418-88(1998) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines"
2006,ASTM,"D4423-00(2006) Standard Test Method for Determination of Carbonyls In C<inf>4</inf> Hydrocarbons"
2000,ASTM,"D4423-00 Standard Test Method for Determination of Carbonyls In C<sub>4</sub> Hydrocarbons"
1996,ASTM,"D4423-91(1996) Standard Test Method for Determination of Carbonyls In C<sub>4</sub> Hydrocarbons"
2004,ASTM,"D4815-04 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography"
2003,ASTM,"D4815-03 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography"
1999,ASTM,"D4815-99e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <i>tertiary</i>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography"
1999,ASTM,"D4815-99 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <i>tertiary</i>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography"
2010,ASTM,"D5187-10 Standard Test Method for Determination of Crystallite Size (L<inf>c</inf> of Calcined Petroleum Coke by X-Ray Diffraction"
2007,ASTM,"D5187-91(2007) Standard Test Method for Determination of Crystallite Size (L<inf>c</inf> of Calcined Petroleum Coke by X-Ray Diffraction"
1997,ASTM,"D5187-91(1997) Standard Test Method for Determination of Crystallite Size (L<sub>c</sub>) of Calcined Petroleum Coke by X-Ray Diffraction"
2007,ASTM,"D5580-02(2007) Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene,   p/m-Xylene, o-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography"
2002,ASTM,"D5580-02 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <i>p/m</i>-Xylene, <i>o</i>-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography"
2000,ASTM,"D5580-00 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <i>p/m</i>-Xylene, <i>o</i>-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography"
2011,ASTM,"D5986-96(2011) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf>-C<inf> 12</inf> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy"
2001,ASTM,"D5986-96(2001) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<sub>8</sub>-C<sub>12</sub> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy"
1996,ASTM,"D5986-96 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<sub>8</sub>-C<sub>12</sub> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy"
2010,ASTM,"D6377-10 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<sub>x</sub> (Expansion Method)"
2008,ASTM,"D6377-08 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<sub>x</sub> (Expansion Method)"
2003,ASTM,"D6377-03 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<sub>x</sub> (Expansion Method)"
1999,ASTM,"D6377-99 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<sub>x</sub> (Expansion Method)"
2010,ASTM,"D6378-10 Standard Test Method for Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2007,ASTM,"D6378-07e1 Standard Test Method for Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2007,ASTM,"D6378-07 Standard Test Method for Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2006,ASTM,"D6378-06 Standard Test Method for Determination of Vapor Pressure (VP<sub>X</sub>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2003,ASTM,"D6378-03 Standard Test Method for Determination of Vapor Pressure (VP<sub>x</sub>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
1999,ASTM,"D6378-99e1 Standard Test Method for Determination of Vapor Pressure (VP<sub>x</sub>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)"
2001,ASTM,"D5598-01 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling"
1995,ASTM,"D5598-95a Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling"
2006,ASTM,"D5704-06 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2003,ASTM,"D5772-03 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2004,ASTM,"D5798-99(2004) Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines"
2007,ASTM,"D5967-07 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
1997,ASTM,"D5983-97 Standard Specification for Methyl <i>Tertiary</i>-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel"
1997,ASTM,"D6120-97 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature"
2006,ASTM,"D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers"
2011,ASTM,"D6185-11 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases"
1999,ASTM,"D6201-99 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2008,ASTM,"D6217-98(2008) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration"
2011,ASTM,"D4871-11 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus (Redline)"
2010,ASTM,"D4486-10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2011,ASTM,"D6379-11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates&#8212;High Performance Liquid Chromatography Method with Refractive Index Detection"
2011,ASTM,"D4814-11b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2011,ASTM,"D4485-11c Standard Specification for Performance of Active API Service Category Engine Oils"
2011,ASTM,"D4871-11 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus"
2011,ASTM,"D4998-11 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids"
2011,ASTM,"D4529-01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels"
2003,ASTM,"D6186-98(2003)e1 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)"
2010,ASTM,"D6299-10e2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance"
2011,ASTM,"D5236-03(2011) Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
2011,ASTM,"D6425-11 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine"
2012,ASTM,"D4952-12 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)"
2012,ASTM,"D4306-12a Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
2012,ASTM,"D4629-12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection"
2012,ASTM,"D4693-07(2012) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2012,ASTM,"D4178-82(2012) Standard Practice for Calibrating Moisture Analyzers"
2012,ASTM,"D6374-12 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
2011,ASTM,"D5706-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2012,ASTM,"D5705-12 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils"
2011,ASTM,"D5707-11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2012,ASTM,"D5761-96(2012) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials"
2012,ASTM,"D5762-12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence"
2011,ASTM,"D5763-11 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware"
2012,ASTM,"D5967-12 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2012,ASTM,"D6227-12 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2012,ASTM,"D6082-12 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils"
2012,ASTM,"D6121-12 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2012,ASTM,"D6021-12 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection"
2012,ASTM,"D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis"
2012,ASTM,"D6354-12 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production"
2012,ASTM,"D5704-12 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles"
2012,ASTM,"D4306-12 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
2012,ASTM,"D4290-07(2012) Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions"
2012,ASTM,"D4808-01(2012) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy"
2012,ASTM,"D5579-12 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test"
2012,ASTM,"D6046-02(2012) Standard Classification of Hydraulic Fluids for Environmental Impact"
2012,ASTM,"D6203-06(2012) Standard Test Method for Thermal Stability of Way Lubricants"
2012,ASTM,"D5662-12 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers"
1999,ASTM,"D4178-82(1999) Standard Practice for Calibrating Moisture Analyzers"
2012,ASTM,"D4306-12b Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination"
2012,ASTM,"D4627-12 Standard Test Method for Iron Chip Corrosion for Water&ndash;Miscible Metalworking Fluids"
2012,ASTM,"D4715-98(2012) Standard Test Method for  Coking Value of Tar and Pitch (Alcan)"
2009,ASTM,"D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)"
2012,ASTM,"D4953-06(2012) Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry   Method)"
2012,ASTM,"D5191-12 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2012,ASTM,"D5598-01(2012) Standard Test Method for  Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for  Electronic Port Fuel Injector Fouling"
2012,ASTM,"D5771-12 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
2012,ASTM,"D5950-12 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
2012,ASTM,"D6022-06(2012) Standard Practice for  Calculation of Permanent Shear Stability Index"
2012,ASTM,"D6080-12 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2012,ASTM,"D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing,  Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and   Atomic Absorption Spectrometry"
2012,ASTM,"D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2012,ASTM,"D6120-97(2012) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material  at Room Temperature"
2012,ASTM,"D6277-07(2012) Standard Test Method for  Determination of Benzene in Spark-Ignition Engine Fuels Using   Mid Infrared Spectroscopy"
2007,ASTM,"D4290-07 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions"
2002,ASTM,"D4290-02 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions"
1999,ASTM,"D4290-94(1999) Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions"
1998,ASTM,"D4291-93(1998) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil"
2012,ASTM,"D5234-92(2012) Standard Guide for  Analysis of Ethylene Product"
2012,ASTM,"D5303-92(2012) Standard Test Method for  Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
2013,ASTM,"D4814-13a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2012,ASTM,"D5846-07(2012) Standard Test Method for  Universal Oxidation Test for Hydraulic and Turbine Oils Using   the Universal Oxidation Test Apparatus"
2012,ASTM,"D6159-97(2012) Standard Test Method for  Determination of Hydrocarbon Impurities in Ethylene by Gas  Chromatography"
2004,ASTM,"D6424-04a Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2004,ASTM,"D6424-04 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2003,ASTM,"D6424-03 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
1999,ASTM,"D6424-99 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2012,ASTM,"D5273-92(2012) Standard Guide for  Analysis of Propylene Concentrates"
1998,ASTM,"D4294-90(1998)e1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy"
2012,ASTM,"D4306-12c Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace  Contamination"
2012,ASTM,"D4308-12 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision   Meter"
2012,ASTM,"D4378-12 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines"
2012,ASTM,"D4684-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2012,ASTM,"D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2012,ASTM,"D4806-12 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2013,ASTM,"D4814-13 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2012,ASTM,"D4814-12 Standard Specification for Automotive Spark-Ignition Engine Fuel"
1995,ASTM,"D4814-95a Standard Specification for Automotive Spark-Ignition Engine Fuel"
1993,ASTM,"D4814-93a Standard Specification for Automotive Spark-Ignition Engine Fuel"
1992,ASTM,"D4814-92a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2012,ASTM,"D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring  Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines  Other Than Outboards"
2012,ASTM,"D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring  Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines  Other Than Outboards (Redline)"
2012,ASTM,"D4928-12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration"
2012,ASTM,"D4928-12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Redline)"
2012,ASTM,"D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence   of Lubricating Oils Using a Temperature-Scanning Technique"
1991,ASTM,"D5186-91 Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography"
2013,ASTM,"D5236-13 Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill   Method)"
1992,ASTM,"D5291-92 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2012,ASTM,"D5305-12 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2012,ASTM,"D5453-12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence"
1994,ASTM,"D5500-94 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation"
2012,ASTM,"D5501-12 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing  Greater than 20% Ethanol by Gas Chromatography"
2012,ASTM,"D5579-12a Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
1994,ASTM,"D5598-94 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling"
2012,ASTM,"D5662-12a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2012,ASTM,"D5704-12a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2012,ASTM,"D5708-12 Standard Test Methods for  Determination of Nickel, Vanadium, and Iron in Crude Oils and   Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission   Spectrometry"
2012,ASTM,"D5798-12 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2012,ASTM,"D5950-12a Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
2012,ASTM,"D5950-12a Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) (Redline)"
2012,ASTM,"D5966-12 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty   Diesel Engine"
2012,ASTM,"D5967-12a Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2011,ASTM,"D5969-11e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments"
2012,ASTM,"D6045-12 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2012,ASTM,"D6080-12a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2012,ASTM,"D6121-12b Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2012,ASTM,"D6121-12a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2012,ASTM,"D6278-12e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus"
2012,ASTM,"D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
2012,ASTM,"D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Redline)"
2012,ASTM,"D6352-12 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174 to 700&deg;C by Gas Chromatography"
2012,ASTM,"D6450-12 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
2013,ASTM,"D4858-13 Standard Test Method for  Determination of the Tendency of Lubricants to Promote Preignition  in Two-Stroke-Cycle Gasoline Engines"
2013,ASTM,"D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter   (Precision Method)"
2013,ASTM,"D5967-13 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2013,ASTM,"D4806-13 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2013,ASTM,"D5704-13 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2013,ASTM,"D5798-13 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2013,ASTM,"D5966-13 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty   Diesel Engine"
2013,ASTM,"D5966-13 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty   Diesel Engine (Redline)"
2013,ASTM,"D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2013,ASTM,"D6138-13 Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2000,ASTM,"D4177-95(2000) Standard Practice for Automatic Sampling of Peroleum and Petroleum Products"
1995,ASTM,"D4177-95 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2013,ASTM,"D4682-13 Standard Specification for  Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle  Gasoline Engine Lubricants"
2013,ASTM,"D4806-13a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2013,ASTM,"D4858-13 Standard Test Method for  Determination of the Tendency of Lubricants to Promote Preignition  in Two-Stroke-Cycle Gasoline Engines (Redline)"
2013,ASTM,"D4859-13 Standard Specification for  Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC"
2013,ASTM,"D4859-13 Standard Specification for  Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC (Redline)"
2013,ASTM,"D4860-13 Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating)"
2013,ASTM,"D4863-13 Standard Test Method for  Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine   Lubricants"
2013,ASTM,"D4863-13 Standard Test Method for  Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine   Lubricants (Redline)"
2013,ASTM,"D5797-13 Standard Specification for  Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
2013,ASTM,"D5798-13a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2013,ASTM,"D5983-13 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending   for Use in Automotive Spark-Ignition Engine Fuel"
2001,ASTM,"D4485-01a Standard Specification for Performance of Engine Oils"
1998,ASTM,"D4539-98 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)"
1996,ASTM,"D4682-87(1996) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants"
1997,ASTM,"D4693-97 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2000,ASTM,"D4740-95(2000) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2002,ASTM,"D4742-02 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)"
2001,ASTM,"D5006-96(2001) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels"
1991,ASTM,"D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2000)"
2001,ASTM,"D5190-01 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)"
1999,ASTM,"D5190-99 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)"
2001,ASTM,"D5236-01 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)"
2001,ASTM,"D5291-01 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants"
2000,ASTM,"D5304-00 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure"
2002,ASTM,"D5305-97(2002) Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2007,ASTM,"D5307-97(2007) Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography"
1997,ASTM,"D5307-97 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography"
1995,ASTM,"D5771-95 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)"
1995,ASTM,"D5772-95 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
1995,ASTM,"D5773-95 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2002,ASTM,"D5984-97(2002)e1 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration"
2002,ASTM,"D6120-97(2002) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature"
2000,ASTM,"D6299-00a Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance"
1999,ASTM,"D6300-99 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants"
2001,ASTM,"D6426-01 Standard Test Method for Determining Filterability of Distillate Fuel Oils"
2001,ASTM,"D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels"
1999,ASTM,"D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels"
2002,ASTM,"D5187-91(2002) Standard Test Method for Determination of Crystallite Size (L<sub>c</sub>) of Calcined Petroleum Coke by X-Ray Diffraction"
2013,ASTM,"D4616-95(2013) Standard Test Method for Microscopical Analysis by Reflected Light and Determination  of Mesophase in a Pitch"
2000,ASTM,"D4177-00 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products"
2013,ASTM,"D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision   Meter"
2013,ASTM,"D4306-13 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace  Contamination"
2013,ASTM,"D4746-98(2013) Standard Test Method for  Determination of Quinoline Insolubles (QI) in Tar and Pitch  by Pressure Filtration"
2013,ASTM,"D4950-13 Standard Classification and Specification for  Automotive Service Greases"
2013,ASTM,"D4998-13 Standard Test Method for  Evaluating Wear Characteristics of Tractor Hydraulic Fluids"
2013,ASTM,"D4998-13 Standard Test Method for  Evaluating Wear Characteristics of Tractor Hydraulic Fluids (Redline)"
2013,ASTM,"D5059-13 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
2013,ASTM,"D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence   of Lubricating Oils Using a Temperature-Scanning Technique"
2013,ASTM,"D5185-13 Standard Test Method for  Multielement Determination of Used and Unused Lubricating Oils  and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry  &amp;lpar;ICP-AES&amp;rpar;"
2013,ASTM,"D5306-92(2013) Standard Test Method for  Linear Flame Propagation Rate of Lubricating Oils and Hydraulic  Fluids"
2013,ASTM,"D5441-98(2013) Standard Test Method for  Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
2013,ASTM,"D5442-93(2013) Standard Test Method for  Analysis of Petroleum Waxes by Gas Chromatography"
2013,ASTM,"D5482-07(2013) Standard Test Method for  Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)"
2012,ASTM,"D5501-12e1 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing  Greater than 20% Ethanol by Gas Chromatography"
2013,ASTM,"D5579-13 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2013,ASTM,"D5662-13 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2013,ASTM,"D5704-13a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2013,ASTM,"D5760-13 Standard Specification for  Performance of Manual Transmission Gear Lubricants"
2013,ASTM,"D6121-13 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2013,ASTM,"D6160-98(2013) Standard Test Method for  Determination of Polychlorinated Biphenyls (PCBs) in Waste  Materials by Gas Chromatography"
2013,ASTM,"D6300-13 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2013,ASTM,"D6426-13 Standard Test Method for  Determining Filterability of Middle Distillate Fuel Oils"
1998,ASTM,"D4241-98 Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems"
1998,ASTM,"D4248-98 Standard Practice for Design of Steam Turbine Generator Oil Systems"
1998,ASTM,"D4305-98a Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures"
1999,ASTM,"D5620-94(1999) Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine"
1999,ASTM,"D5862-99a Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine"
1999,ASTM,"D5901-99 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)"
1998,ASTM,"D6293-98 Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography"
1999,ASTM,"D6445-99 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry"
2000,ASTM,"D5302-00a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions"
2001,ASTM,"D5302-01 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions"
2000,ASTM,"D6202-00a Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine"
2003,ASTM,"D5862-03 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine"
,ASTM,"D5372-04 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids"
2006,ASTM,"D5862-06 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine"
2013,ASTM,"D5580-13 Standard Test Method for  Determination of Benzene, Toluene, Ethylbenzene,  <emph  type=""ital""> p/m</emph>-Xylene, <emph type=""ital"">o</emph>-Xylene,  C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished  Gasoline by Gas Chromatography"
2013,ASTM,"D6299-13 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2013,ASTM,"D4378-13 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas,  and Combined Cycle Turbines"
2013,ASTM,"D4815-13 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2013,ASTM,"D5002-13 Standard Test Method for  Density and Relative Density of Crude Oils by Digital Density   Analyzer"
2013,ASTM,"D4304-13 Standard Specification for  Mineral and Synthetic Lubricating Oil Used in Steam or Gas  Turbines"
2013,ASTM,"D4683-13 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer   at 150?&deg;C"
2013,ASTM,"D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2013,ASTM,"D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer"
2013,ASTM,"D4422-13 Standard Test Method for  Ash in Analysis of Petroleum Coke"
2013,ASTM,"D5188-13 Standard Test Method for  Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated   Chamber Method)"
2013,ASTM,"D5191-13 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2013,ASTM,"D5705-13 Standard Test Method for  Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual  Fuel Oils"
2013,ASTM,"D5134-13 Standard Test Method for  Detailed Analysis of Petroleum Naphthas through n-Nonane by  Capillary Gas Chromatography"
2014,ASTM,"D5842-14 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2013,ASTM,"D4289-13 Standard Test Method for  Elastomer Compatibility of Lubricating Greases and Fluids"
2014,ASTM,"D5188-14 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels &#40;Evacuated  Chamber and Piston Based Method&#41;"
2014,ASTM,"D4814-14a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2014,ASTM,"D4424-09(2014) Standard Test Method for  Butylene Analysis by Gas Chromatography"
2014,ASTM,"D5274-00(2014) Standard Guide for  Analysis of 1,3&ndash;Butadiene Product"
2014,ASTM,"D5799-95(2014) Standard Test Method for  Determination of Peroxides in Butadiene"
2014,ASTM,"D4740-04(2014) Standard Test Method for  Cleanliness and Compatibility of Residual Fuels by Spot Test"
2014,ASTM,"D4929-07(2014) Standard Test Methods for  Determination of Organic Chloride Content in Crude Oil"
2014,ASTM,"D5292-99(2014) Standard Test Method for  Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution   Nuclear Magnetic Resonance Spectroscopy"
2014,ASTM,"D5372-04(2014) Standard Guide for  Evaluation of Hydrocarbon Heat Transfer Fluids"
2014,ASTM,"D6258-09(2014) Standard Test Method for  Determination of Solvent Red 164 Dye Concentration in Diesel  Fuels"
2014,ASTM,"D6375-09(2014) Standard Test Method for  Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer   &#40;TGA&#41; Noack Method"
2014,ASTM,"D6447-09(2014) Standard Test Method for  Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric  Analysis"
2014,ASTM,"D6300-14a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2014,ASTM,"D4814-14 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2014,ASTM,"D4636-14 Standard Test Method for  Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft   Turbine Engine Lubricants, and Other Highly Refined Oils"
2014,ASTM,"D4806-14 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2014,ASTM,"D5059-14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
2014,ASTM,"D5600-14 Standard Test Method for  Trace Metals in Petroleum Coke by Inductively Coupled Plasma   Atomic Emission Spectrometry &#40;ICP-AES&#41;"
2014,ASTM,"D5798-14 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2014,ASTM,"D5384-14 Standard Test Methods for  Chlorine in Used Petroleum Products &#40;Field Test Kit Method&#41;"
2014,ASTM,"D5705-14 Standard Test Method for  Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual  Fuel Oils"
2014,ASTM,"D4684-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2014,ASTM,"D4864-14 Standard Test Method for  Determination of Traces of Methanol in Propylene Concentrates   by Gas Chromatography"
2014,ASTM,"D5384-14 Standard Test Methods for  Chlorine in Used Petroleum Products &#40;Field Test Kit Method&#41; (Redline)"
2014,ASTM,"D4864-14 Standard Test Method for  Determination of Traces of Methanol in Propylene Concentrates   by Gas Chromatography (Redline)"
2014,ASTM,"D4746-14 Standard Test Method for  Determination of Quinoline Insolubles &#40;QI&#41; in Tar and Pitch  by Pressure Filtration"
2014,ASTM,"D4746-14e1 Standard Test Method for  Determination of Quinoline Insolubles &#40;QI&#41; in Tar and Pitch  by Pressure Filtration"
2014,ASTM,"D4814-14b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2014,ASTM,"D4951-14 Standard Test Method for  Determination of Additive Elements in Lubricating Oils by Inductively  Coupled Plasma Atomic Emission Spectrometry (Redline)"
2014,ASTM,"D4425-09(2014) Standard Test Method for  Oil Separation from Lubricating Grease by Centrifuging (Koppers   Method)"
2014,ASTM,"D4865-09(2014) Standard Guide for  Generation and Dissipation of Static Electricity in Petroleum  Fuel Systems"
2014,ASTM,"D5001-10(2014) Standard Test Method for  Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder   Lubricity Evaluator (BOCLE)"
2014,ASTM,"D5500-98(2014) Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2014,ASTM,"D6081-98(2014) Standard Practice for  Aquatic Toxicity Testing of Lubricants: Sample Preparation   and Results Interpretation"
2014,ASTM,"D6421-99a(2014) Standard Test Method for  Evaluating Automotive Spark-Ignition Engine Fuel for Electronic   Port Fuel Injector Fouling by Bench Procedure"
2014,ASTM,"D4289-13(2014)e1 Standard Test Method for  Elastomer Compatibility of Lubricating Greases and Fluids"
2014,ASTM,"D6201-04(2014) Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation"
2014,ASTM,"D5968-14 Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&deg;C"
2014,ASTM,"D6121-14 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2014,ASTM,"D5443-14 Standard Test Method for  Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis  in Petroleum Distillates Through 200 &deg;C by Multi-Dimensional Gas  Chromatography"
2014,ASTM,"D4951-14 Standard Test Method for  Determination of Additive Elements in Lubricating Oils by Inductively  Coupled Plasma Atomic Emission Spectrometry"
2014,ASTM,"D5662-14 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2014,ASTM,"D5967-14 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2014,ASTM,"D6448-14 Standard Specification for  Industrial Burner Fuels from Used Lubricating Oils"
2014,ASTM,"D5800-14 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2014,ASTM,"D6377-14 Standard Test Method for  Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf  >&#8201;&#40;Expansion  Method&#41;"
2014,ASTM,"D6352-14 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174&thinsp;&deg;C to 700&thinsp;&deg;C by Gas Chromatography"
2014,ASTM,"D6448-14e1 Standard Specification for  Industrial Burner Fuels from Used Lubricating Oils"
2014,ASTM,"D5800-14e1 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2014,ASTM,"D4860-14 Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating)"
2014,ASTM,"D6423-14 Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends"
2014,ASTM,"D6158-14 Standard Specification for  Mineral Hydraulic Oils"
2014,ASTM,"D4870-09(2014) Standard Test Method for  Determination of Total Sediment in Residual Fuels"
2014,ASTM,"D6424-04a(2014) Standard Practice for  Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2014,ASTM,"D6300-14ae1 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2014,ASTM,"D5800-14e2 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2014,ASTM,"D6184-14 Standard Test Method for  Oil Separation from Lubricating Grease (Conical Sieve Method)"
2014,ASTM,"D5704-14 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2014,ASTM,"D5293-14 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &ndash;5&deg;C   and &ndash;35&deg;C Using Cold-Cranking Simulator"
2015,ASTM,"D5704-15 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2014,ASTM,"D5579-14 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2014,ASTM,"D5949-14 Standard Test Method for Pour Point of Petroleum Products &#40;Automatic Pressure Pulsing   Method&#41;"
2014,ASTM,"D5950-14 Standard Test Method for Pour Point of Petroleum Products &#40;Automatic Tilt Method&#41;"
2014,ASTM,"D4927-14 Standard Test Methods for  Elemental Analysis of Lubricant and Additive Components&mdash;Barium,   Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray   Fluorescence Spectroscopy"
2015,ASTM,"D5967-15 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2015,ASTM,"D4290-15 Standard Test Method for  Determining the Leakage Tendencies of Automotive Wheel Bearing   Grease Under Accelerated Conditions"
2015,ASTM,"D5771-15 Standard Test Method for  Cloud Point of Petroleum Products (Optical Detection Stepped  Cooling Method)"
2015,ASTM,"D5772-15 Standard Test Method for  Cloud Point of Petroleum Products (Linear Cooling Rate Method)"
2015,ASTM,"D5773-15 Standard Test Method for  Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2015,ASTM,"D5293-15 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator"
2015,ASTM,"D5579-15 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2012,ASTM,"D5708-12e1 Standard Test Methods for  Determination of Nickel, Vanadium, and Iron in Crude Oils and   Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission   Spectrometry"
2015,ASTM,"D4296-83(2015)e1 Standard Practice for  Sampling Pitch"
2015,ASTM,"D5018-89(2015)e1 Standard Test Method for  Shear Viscosity of Coal-Tar and Petroleum Pitches"
2015,ASTM,"D6074-15 Standard Guide for  Characterizing Hydrocarbon Lubricant Base Oils"
2015,ASTM,"D6074-15 Standard Guide for  Characterizing Hydrocarbon Lubricant Base Oils (Redline)"
2015,ASTM,"D5304-15 Standard Test Method for  Assessing Middle Distillate Fuel Storage Stability by Oxygen   Overpressure"
2015,ASTM,"D4419-90(2015) Standard Test Method for  Measurement of Transition Temperatures of Petroleum Waxes by  Differential Scanning Calorimetry (DSC)"
2015,ASTM,"D4807-05(2015) Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
2015,ASTM,"D4423-10(2015) Standard Test Method for  Determination of Carbonyls in C<inf>4</inf> Hydrocarbons"
2015,ASTM,"D4893-94(2015)e1 Standard Test Method for  Determination of Pitch Volatility"
2015,ASTM,"D4626-95(2015) Standard Practice for  Calculation of Gas Chromatographic Response Factors"
2015,ASTM,"D5291-10(2015) Standard Test Methods for  Instrumental Determination of Carbon, Hydrogen, and Nitrogen   in Petroleum Products and Lubricants"
2015,ASTM,"D5854-96(2015) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum   Products"
2015,ASTM,"D5056-15 Standard Test Method for  Trace Metals in Petroleum Coke by Atomic Absorption"
2015,ASTM,"D4929-15 Standard Test Methods for  Determination of Organic Chloride Content in Crude Oil"
2015,ASTM,"D4530-15 Standard Test Method for  Determination of Carbon Residue (Micro Method)"
2015,ASTM,"D4530-15 Standard Test Method for  Determination of Carbon Residue (Micro Method) (Redline)"
2015,ASTM,"D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence   of Lubricating Oils Using a Temperature-Scanning Technique"
2015,ASTM,"D5186-15 Standard Test Method for  Determination of the Aromatic Content and Polynuclear Aromatic  Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical  Fluid Chromatography"
2015,ASTM,"D4953-15 Standard Test Method for  Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry   Method)"
2014,ASTM,"D4625-14 Standard Test Method for  Middle Distillate Fuel Storage Stability at 43&thinsp;&deg;C  (110&thinsp;&deg;F)"
2015,ASTM,"D5800-15 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2015,ASTM,"D6300-15 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2015,ASTM,"D4293-15 Standard Specification for  Phosphate Ester Based Fluids for Turbine Lubrication and Steam  Turbine Electro-Hydraulic Control (EHC) Applications"
2015,ASTM,"D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection"
2015,ASTM,"D5800-15a Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2015,ASTM,"D6417-15 Standard Test Method for  Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
2015,ASTM,"D6417-15 Standard Test Method for  Estimation of Engine Oil Volatility by Capillary Gas Chromatography (Redline)"
2015,ASTM,"D5705-15 Standard Test Method for  Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual  Fuel Oils"
2015,ASTM,"D5769-10(2015) Standard Test Method for  Determination of Benzene, Toluene, and Total Aromatics in Finished   Gasolines by Gas Chromatography/Mass Spectrometry"
2015,ASTM,"D6352-15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174&#x2009;&#xb0;C to 700&#x2009;&#xb0;C by Gas Chromatography"
2015,ASTM,"D4814-15 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D4814-15a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D6259-15 Standard Practice for  Determination of a Pooled Limit of Quantitation for a Test  Method"
2015,ASTM,"D4177-15 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2013,ASTM,"D5621-07(2013) Standard Test Method for  Sonic Shear Stability of Hydraulic Fluids"
2013,ASTM,"D6296-98(2013) Standard Test Method for  Total Olefins in Spark-ignition Engine Fuels by Multidimensional  Gas Chromatography"
2013,ASTM,"D4291-04(2013) Standard Test Method for  Trace Ethylene Glycol in Used Engine Oil"
2013,ASTM,"D6468-08(2013) Standard Test Method for  High Temperature Stability of Middle Distillate Fuels"
2013,ASTM,"D6186-08(2013) Standard Test Method for  Oxidation Induction Time of Lubricating Oils by Pressure Differential  Scanning Calorimetry (PDSC)"
2014,ASTM,"D5182-97(2014) Standard Test Method for  Evaluating the Scuffing Load Capacity of Oils &#40;FZG Visual Method&#41;"
2014,ASTM,"D5623-94(2014) Standard Test Method for  Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography  and Sulfur Selective Detection"
2014,ASTM,"D5985-02(2014) Standard Test Method for  Pour Point of Petroleum Products &#40;Rotational Method&#41;"
2012,ASTM,"D6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup &#40;CCCFP&#41; Tester"
2013,ASTM,"D5185-13e1 Standard Test Method for  Multielement Determination of Used and Unused Lubricating Oils  and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry  &#40;ICP-AES&#41;"
2013,ASTM,"D4864-90(2013) Standard Test Method for  Determination of Traces of Methanol in Propylene Concentrates   by Gas Chromatography"
2013,ASTM,"D6300-13a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2014,ASTM,"D6300-14 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2014,ASTM,"D4628-14 Standard Test Method for  Analysis of Barium, Calcium, Magnesium, and Zinc in Unused   Lubricating Oils by Atomic Absorption Spectrometry"
2013,ASTM,"D6299-13e1 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2015,ASTM,"D4806-15 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D6121-15 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2015,ASTM,"D4815-15a Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2015,ASTM,"D5191-15 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2015,ASTM,"D5967-15a Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2015,ASTM,"D6121-15a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2015,ASTM,"D5704-15a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2015,ASTM,"D6377-15 Standard Test Method for  Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf  >&#x2009;(Expansion  Method)"
2015,ASTM,"D5797-15 Standard Specification for  Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines"
2015,ASTM,"D5798-15 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2015,ASTM,"D4306-15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace  Contamination"
2015,ASTM,"D5983-15 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending   for Use in Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D4177-15a Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2015,ASTM,"D5986-96(2015) Standard Test Method for  Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf  >&#x2013;C<inf>  12</inf> Aromatics and Total Aromatics in Finished  Gasoline by Gas  Chromatography/Fourier Transform Infrared Spectroscopy"
2015,ASTM,"D5187-10(2015)e1 Standard Test Method for  Determination of Crystallite Size (L<inf>c</inf>) of Calcined   Petroleum Coke by X-Ray Diffraction"
2015,ASTM,"D5483-05(2015) Standard Test Method for  Oxidation Induction Time of Lubricating Greases by Pressure   Differential Scanning Calorimetry"
2015,ASTM,"D4310-10(2015) Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils"
2015,ASTM,"D4929-15a Standard Test Methods for  Determination of Organic Chloride Content in Crude Oil"
2015,ASTM,"D4927-15 Standard Test Methods for  Elemental Analysis of Lubricant and Additive Components&#x2014;Barium,   Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray   Fluorescence Spectroscopy"
2015,ASTM,"D4312-15 Standard Test Method for  Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
2015,ASTM,"D5769-15 Standard Test Method for  Determination of Benzene, Toluene, and Total Aromatics in Finished   Gasolines by Gas Chromatography/Mass Spectrometry"
2015,ASTM,"D5580-15 Standard Test Method for  Determination of Benzene, Toluene, Ethylbenzene,  <emph  type=""ital""> p/m</emph>-Xylene, <emph type=""ital"">o</emph>-Xylene,  C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished  Gasoline by Gas Chromatography"
2015,ASTM,"D4815-15b Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2015,ASTM,"D5972-15 Standard Test Method for  Freezing Point of Aviation Fuels (Automatic Phase Transition   Method)"
2015,ASTM,"D5773-15a Standard Test Method for  Cloud Point of Petroleum Products (Constant Cooling Rate Method)"
2015,ASTM,"D5002-15 Standard Test Method for  Density and Relative Density of Crude Oils by Digital Density   Analyzer"
2016,ASTM,"D5500-16 Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2015,ASTM,"D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2016,ASTM,"D4294-16 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive   X-ray Fluorescence  Spectrometry"
2016,ASTM,"D5002-16 Standard Test Method for  Density and Relative Density of Crude Oils by Digital Density   Analyzer"
2016,ASTM,"D4814-16 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4806-16 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4806-16a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4814-16a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4898-16 Standard Test Method for  Insoluble Contamination of Hydraulic Fluids by Gravimetric   Analysis"
2016,ASTM,"D6158-16 Standard Specification for  Mineral Hydraulic Oils"
2016,ASTM,"D6299-16 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2016,ASTM,"D4294-16e1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive   X-ray Fluorescence  Spectrometry"
2016,ASTM,"D6121-16 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2016,ASTM,"D5662-16 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2016,ASTM,"D5579-16 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2016,ASTM,"D5704-16 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2016,ASTM,"D6377-16 Standard Test Method for  Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf  >&#x2009;(Expansion  Method)"
2016,ASTM,"D6300-16 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2016,ASTM,"D6448-16 Standard Specification for  Industrial Burner Fuels from Used Lubricating Oils"
2016,ASTM,"D6448-16 Standard Specification for  Industrial Burner Fuels from Used Lubricating Oils (Redline)"
2016,ASTM,"D5453-16 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence"
2016,ASTM,"D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated  Chamber and Piston Based Method)"
2016,ASTM,"D4814-16b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D5949-16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing   Method)"
2016,ASTM,"D5949-16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing   Method) (Redline)"
2016,ASTM,"D5797-16 Standard Specification for  Methanol Fuel Blends (M51&#x2013;M85) for Methanol-Capable  Automotive Spark-Ignition Engines"
2016,ASTM,"D6138-16 Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2016,ASTM,"D4418-00(2016) Standard Practice for  Receipt, Storage, and Handling of Fuels for Gas Turbines"
2016,ASTM,"D5006-11(2016) Standard Test Method for  Measurement of Fuel System Icing Inhibitors (Ether Type) in   Aviation Fuels"
2016,ASTM,"D5863-00a(2016) Standard Test Methods for  Determination of Nickel, Vanadium, Iron, and Sodium in Crude   Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2016,ASTM,"D6078-04(2016) Standard Test Method for  Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder   Lubricity Evaluator (SLBOCLE)"
2016,ASTM,"D6079-11(2016) Standard Test Method for  Evaluating Lubricity of Diesel Fuels by the High-Frequency   Reciprocating Rig (HFRR)"
2016,ASTM,"D5622-16 Standard Test Methods for  Determination of Total Oxygen in Gasoline and Methanol Fuels  by Reductive Pyrolysis"
2016,ASTM,"D5275-16 Standard Test Method for  Fuel Injector Shear Stability Test (FISST) for Polymer Containing   Fluids"
2016,ASTM,"D4742-16 Standard Test Method for  Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film   Oxygen Uptake (TFOUT)"
2016,ASTM,"D5972-16 Standard Test Method for  Freezing Point of Aviation Fuels (Automatic Phase Transition   Method)"
2016,ASTM,"D5453-16e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence"
2016,ASTM,"D6304-16 Standard Test Method for  Determination of Water in Petroleum Products, Lubricating Oils,   and Additives by Coulometric Karl Fischer Titration"
2016,ASTM,"D6450-16 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
2016,ASTM,"D6351-10(2016) Standard Test Method for  Determination of Low Temperature Fluidity and Appearance of   Hydraulic Fluids"
2016,ASTM,"D4737-10(2016) Standard Test Method for  Calculated Cetane Index by Four Variable Equation"
2016,ASTM,"D5183-05(2016) Standard Test Method for  Determination of the Coefficient of Friction of Lubricants  Using the Four-Ball Wear Test Machine"
2016,ASTM,"D4814-16c Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4814-16d Standard Specification for Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D4485-15a Standard Specification for  Performance of Active API Service Category Engine Oils"
2016,ASTM,"D6300-16a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2016,ASTM,"D6184-16 Standard Test Method for  Oil Separation from Lubricating Grease (Conical Sieve Method)"
2016,ASTM,"D6304-16e1 Standard Test Method for  Determination of Water in Petroleum Products, Lubricating Oils,   and Additives by Coulometric Karl Fischer Titration"
2016,ASTM,"D5291-16 Standard Test Methods for  Instrumental Determination of Carbon, Hydrogen, and Nitrogen   in Petroleum Products and Lubricants"
2016,ASTM,"D6121-16a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2016,ASTM,"D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
2016,ASTM,"D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester (Redline)"
2016,ASTM,"D4929-16 Standard Test Method for  Determination of Organic Chloride Content in Crude Oil"
2016,ASTM,"D6335-16 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation  Engine Oil Simulation Test"
2016,ASTM,"D5763-11(2016) Standard Test Method for  Oxidation and Thermal Stability Characteristics of Gear Oils   Using Universal Glassware"
2016,ASTM,"D5501-12(2016) Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing  Greater than 20% Ethanol by Gas Chromatography"
2016,ASTM,"D5969-11(2016) Standard Test Method for  Corrosion-Preventive Properties of Lubricating Greases in Presence   of Dilute Synthetic Sea Water Environments"
2016,ASTM,"D6378-10(2016) Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method)"
2016,ASTM,"D5845-01(2016) Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol   and  <emph type=""ital"">tert</emph>-Butanol in Gasoline by Infrared   Spectroscopy"
2016,ASTM,"D6224-16 Standard Practice for  In-Service Monitoring of Lubricating Oil for Auxiliary Power   Plant Equipment"
2016,ASTM,"D4871-11(2016) Standard Guide for  Universal Oxidation/Thermal Stability Test Apparatus"
2016,ASTM,"D4177-16 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2016,ASTM,"D4814-16e Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D4814-16ee1 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2016,ASTM,"D5707-16 Standard Test Method for  Measuring Friction and Wear Properties of Lubricating Grease   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2016,ASTM,"D4628-16 Standard Test Method for  Analysis of Barium, Calcium, Magnesium, and Zinc in Unused   Lubricating Oils by Atomic Absorption Spectrometry"
2016,ASTM,"D6217-11(2016) Standard Test Method for  Particulate Contamination in Middle Distillate Fuels by Laboratory   Filtration"
2016,ASTM,"D4625-16 Standard Test Method for  Middle Distillate Fuel Storage Stability at 43&#x2009;&#xb0;C  (110&#x2009;&#xb0;F)"
2016,ASTM,"D5853-16 Standard Test Method for  Pour Point of Crude Oils"
2016,ASTM,"D6371-16 Standard Test Method for  Cold Filter Plugging Point of Diesel and Heating Fuels"
2016,ASTM,"D4539-16 Standard Test Method for  Filterability of Diesel Fuels by Low-Temperature Flow Test   (LTFT)"
2014,ASTM,"D6227-14 Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2015,ASTM,"D4307-99(2015) Standard Practice for  Preparation of Liquid Blends for Use as Analytical Standards"
2017,ASTM,"D6299-17 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2017,ASTM,"D6006-17 Standard Guide for  Assessing Biodegradability of Hydraulic Fluids"
2017,ASTM,"D5864-17 Standard Test Method for  Determining Aerobic Aquatic Biodegradation of Lubricants or   Their Components"
2017,ASTM,"D6139-17 Standard Test Method for  Determining the Aerobic Aquatic Biodegradation of Lubricants   or Their Components Using the Gledhill Shake Flask"
2017,ASTM,"D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2017,ASTM,"D4868-17 Standard Test Method for  Estimation of Net and Gross Heat of Combustion of Hydrocarbon  Burner and Diesel Fuels"
2017,ASTM,"D4868-17 Standard Test Method for  Estimation of Net and Gross Heat of Combustion of Hydrocarbon  Burner and Diesel Fuels (Redline)"
2017,ASTM,"D4683-17 Standard Test Method for  Measuring Viscosity of New and Used Engine Oils at High Shear   Rate and High Temperature by Tapered Bearing Simulator Viscometer   at 150&#x2009;&#xb0;C"
2017,ASTM,"D6159-17 Standard Test Method for  Determination of Hydrocarbon Impurities in Ethylene by Gas  Chromatography"
2017,ASTM,"D6278-17 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus"
2017,ASTM,"D4529-17 Standard Test Method for  Estimation of Net Heat of Combustion of Aviation Fuels"
2017,ASTM,"D4529-17 Standard Test Method for  Estimation of Net Heat of Combustion of Aviation Fuels (Redline)"
2017,ASTM,"D5234-92(2017) Standard Guide for  Analysis of Ethylene Product"
2017,ASTM,"D6353-06(2017)e1 Standard Guide for  Sampling Plan and Core Sampling for Prebaked Anodes Used in   Aluminum Production"
2017,ASTM,"D6376-10(2017)e1 Standard Test Method for  Determination of Trace Metals in Petroleum Coke by Wavelength   Dispersive X-ray Fluorescence Spectroscopy"
2017,ASTM,"D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material  at Room Temperature"
2016,ASTM,"D5706-16 Standard Test Method for  Determining Extreme Pressure Properties of Lubricating Greases   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2016,ASTM,"D4485-16 Standard Specification for  Performance of Active API Service Category Engine Oils"
2017,ASTM,"D6278-17e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus"
2016,ASTM,"D4177-16e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2017,ASTM,"D6384-17 Standard Terminology Relating to  Biodegradability and Ecotoxicity of Lubricants"
2017,ASTM,"D4418-17 Standard Practice for  Receipt, Storage, and Handling of Fuels for Gas Turbines"
2017,ASTM,"D5275-17 Standard Test Method for  Fuel Injector Shear Stability Test (FISST) for Polymer Containing   Fluids"
2017,ASTM,"D5600-17 Standard Test Method for  Trace Metals in Petroleum Coke by Inductively Coupled Plasma   Atomic Emission Spectrometry (ICP-AES)"
2017,ASTM,"D5622-17 Standard Test Methods for  Determination of Total Oxygen in Gasoline and Methanol Fuels  by Reductive Pyrolysis"
2017,ASTM,"D5622-17 Standard Test Methods for  Determination of Total Oxygen in Gasoline and Methanol Fuels  by Reductive Pyrolysis (Redline)"
2017,ASTM,"D5056-17 Standard Test Method for  Trace Metals in Petroleum Coke by Atomic Absorption"
2017,ASTM,"D4684-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2017,ASTM,"D5853-17 Standard Test Method for  Pour Point of Crude Oils"
2017,ASTM,"D4307-17 Standard Practice for  Preparation of Liquid Blends for Use as Analytical Standards"
2017,ASTM,"D4307-17 Standard Practice for  Preparation of Liquid Blends for Use as Analytical Standards (Redline)"
2017,ASTM,"D4814-17 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2017,ASTM,"D5704-17 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2017,ASTM,"D5236-17 Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill   Method)"
2017,ASTM,"D5771-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical  Detection Stepped Cooling Method)"
2017,ASTM,"D5772-17 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Linear  Cooling Rate Method)"
2017,ASTM,"D5773-17 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Constant  Cooling Rate Method)"
2017,ASTM,"D6227-17 Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2017,ASTM,"D5662-17 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2017,ASTM,"D6121-17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2017,ASTM,"D6258-17 Standard Test Method for  Determination of Solvent Red 164 Dye Concentration in Diesel  Fuels"
2017,ASTM,"D6258-17 Standard Test Method for  Determination of Solvent Red 164 Dye Concentration in Diesel  Fuels (Redline)"
2017,ASTM,"D6300-17 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2017,ASTM,"D4636-17 Standard Test Method for  Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft   Turbine Engine Lubricants, and Other Highly Refined Oils"
2017,ASTM,"D4636-17 Standard Test Method for  Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft   Turbine Engine Lubricants, and Other Highly Refined Oils (Redline)"
2017,ASTM,"D4304-17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas  Turbines"
2017,ASTM,"D6184-17 Standard Test Method for  Oil Separation from Lubricating Grease (Conical Sieve Method)"
2017,ASTM,"D5599-17 Standard Test Method for  Determination of Oxygenates in Gasoline by Gas Chromatography   and Oxygen Selective Flame Ionization Detection"
2017,ASTM,"D4808-17 Standard Test Methods for  Hydrogen Content of Light Distillates, Middle Distillates,   Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance   Spectroscopy"
2017,ASTM,"D6371-17 Standard Test Method for  Cold Filter Plugging Point of Diesel and Heating Fuels"
2017,ASTM,"D5967-17 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2017,ASTM,"D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing,  Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and   Atomic Absorption Spectrometry"
2017,ASTM,"D4952-12(2017) Standard Test Method for  Qualitative Analysis for Active Sulfur Species in Fuels and  Solvents (Doctor Test)"
2017,ASTM,"D4693-07(2017) Standard Test Method for  Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2017,ASTM,"D5761-96(2017) Standard Practice for  Emulsification/Suspension of Multiphase Fluid Waste Materials"
2017,ASTM,"D5770-11(2017) Standard Test Method for  Semiquantitative Micro Determination of Acid Number of Lubricating    Oils During Oxidation Testing"
2017,ASTM,"D5984-11(2017) Standard Test Method for  Semi-Quantitative Field Test Method for Base Number in New   and Used Lubricants by Color-Indicator Titration"
2017,ASTM,"D6334-12(2017) Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
2017,ASTM,"D6374-12(2017)e1 Standard Test Method for  Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
2017,ASTM,"D6439-11(2017) Standard Guide for  Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric   Turbine Lubrication Systems"
2017,ASTM,"D5798-17 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2017,ASTM,"D4739-11(2017) Standard Test Method for  Base Number Determination by Potentiometric Hydrochloric Acid   Titration"
2017,ASTM,"D5442-17 Standard Test Method for  Analysis of Petroleum Waxes by Gas Chromatography"
2017,ASTM,"D5442-17 Standard Test Method for  Analysis of Petroleum Waxes by Gas Chromatography (Redline)"
2017,ASTM,"D4742-17 Standard Test Method for  Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film   Oxygen Uptake (TFOUT)"
2017,ASTM,"D5762-12(2017) Standard Test Method for  Nitrogen in Petroleum and Petroleum Products by Boat-Inlet  Chemiluminescence"
2017,ASTM,"D6082-12(2017) Standard Test Method for  High Temperature Foaming Characteristics of Lubricating Oils"
2017,ASTM,"D6045-12(2017) Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2017,ASTM,"D4629-12(2017) Standard Test Method for  Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet  Oxidative Combustion and Chemiluminescence Detection"
2017,ASTM,"D4806-17 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2017,ASTM,"D6300-17a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2017,ASTM,"D5293-17 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator"
2017,ASTM,"D5293-17e1 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator"
2017,ASTM,"D5773-17e1 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Constant  Cooling Rate Method)"
2017,ASTM,"D5842-17 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2017,ASTM,"D5293-17a Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator"
2017,ASTM,"D5983-17 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending   for Use in Automotive Spark-Ignition Engine Fuel"
2017,ASTM,"D5797-17 Standard Specification for  Methanol Fuel Blends (M51&#x2013;M85) for Methanol-Capable  Automotive Spark-Ignition Engines"
2017,ASTM,"D5968-17 Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&#x2009;&#xb0;C"
2017,ASTM,"D6046-17 Standard Classification of  Hydraulic Fluids for Environmental Impact"
2017,ASTM,"D4178-82(2017) Standard Practice for  Calibrating Moisture Analyzers"
2017,ASTM,"D4291-04(2017) Standard Test Method for  Trace Ethylene Glycol in Used Engine Oil"
2017,ASTM,"D4715-98(2017) Standard Test Method for  Coking Value of Tar and Pitch (Alcan)"
2017,ASTM,"D4930-06(2017) Standard Test Method for  Dust Control Material on Calcined Petroleum Coke"
2017,ASTM,"D4931-06(2017) Standard Test Method for  Gross Moisture in Green Petroleum Coke"
2017,ASTM,"D5003-06a(2017) Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke"
2017,ASTM,"D5004-11(2017) Standard Test Method for  Real Density of Calcined Petroleum Coke by Xylene Displacement"
2017,ASTM,"D5134-13(2017) Standard Test Method for  Detailed Analysis of Petroleum Naphthas through n-Nonane by  Capillary Gas Chromatography"
2017,ASTM,"D5441-98(2017) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
2017,ASTM,"D5846-07(2017) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using  the Universal Oxidation Test Apparatus"
2017,ASTM,"D6021-12(2017) Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by  Multiple Headspace Extraction and Sulfur Specific Detection"
2017,ASTM,"D6160-98(2017) Standard Test Method for  Determination of Polychlorinated Biphenyls (PCBs) in Waste  Materials by Gas Chromatography"
2017,ASTM,"D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by   Cooling Curve Analysis"
2017,ASTM,"D6277-07(2017) Standard Test Method for  Determination of Benzene in Spark-Ignition Engine Fuels Using   Mid Infrared Spectroscopy"
2017,ASTM,"D6296-98(2017) Standard Test Method for  Total Olefins in Spark-ignition Engine Fuels by Multidimensional  Gas Chromatography"
2017,ASTM,"D6354-12(2017) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used  in Aluminum Production"
2017,ASTM,"D5662-17a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2017,ASTM,"D6299-17a Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2017,ASTM,"D6425-17 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure  (EP) Lubricating Oils Using SRV Test Machine"
2017,ASTM,"D4929-17 Standard Test Method for  Determination of Organic Chloride Content in Crude Oil"
2017,ASTM,"D4627-12(2017) Standard Test Method for Iron Chip Corrosion for Water&#x2013;Miscible Metalworking  Fluids"
2017,ASTM,"D4684-17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2017,ASTM,"D6371-17a Standard Test Method for  Cold Filter Plugging Point of Diesel and Heating Fuels"
2017,ASTM,"D4292-17 Standard Test Method for  Determination of Vibrated Bulk Density of Calcined Petroleum   Coke"
2017,ASTM,"D4539-17 Standard Test Method for  Filterability of Diesel Fuels by Low-Temperature Flow Test   (LTFT)"
2017,ASTM,"D5762-17 Standard Test Method for  Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products  by Boat-Inlet Chemiluminescence"
2018,ASTM,"D6299-18 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2018,ASTM,"D4870-18 Standard Test Method for  Determination of Total Sediment in Residual Fuels"
2018,ASTM,"D5305-18 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2018,ASTM,"D5534-94(2018) Standard Test Method for  Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids"
2018,ASTM,"D5800-18 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2017,ASTM,"D6334-12(2017)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence"
2015,ASTM,"D5502-00(2015) Standard Test Method for  Apparent Density by Physical Measurements of Manufactured Anode   and Cathode Carbon Used by the Aluminum Industry"
2015,ASTM,"D5708-15 Standard Test Methods for  Determination of Nickel, Vanadium, and Iron in Crude Oils and   Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission   Spectrometry"
2017,ASTM,"D4629-17 Standard Test Method for  Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative  Combustion and Chemiluminescence Detection"
2017,ASTM,"D5853-17a Standard Test Method for  Pour Point of Crude Oils"
2018,ASTM,"D4814-18 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2017,ASTM,"D4739-17 Standard Test Method for  Base Number Determination by Potentiometric Hydrochloric Acid   Titration"
2017,ASTM,"D6185-11(2017) Standard Practice for  Evaluating Compatibility of Binary Mixtures of Lubricating   Greases"
2016,ASTM,"D4625-16e1 Standard Test Method for  Middle Distillate Fuel Storage Stability at 43&#x2009;&#xb0;C  (110&#x2009;&#xb0;F)"
2017,ASTM,"D6299-17b Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2017,ASTM,"D6203-17 Standard Test Method for  Thermal Stability of Way Lubricants"
2015,ASTM,"D4293-15e1 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam  Turbine Electro-Hydraulic Control (EHC) Applications"
2018,ASTM,"D5762-18 Standard Test Method for  Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products  by Boat-Inlet Chemiluminescence"
2018,ASTM,"D4814-18a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5185-18 Standard Test Method for  Multielement Determination of Used and Unused Lubricating Oils  and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry  (ICP-AES)"
2018,ASTM,"D5236-18 Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill   Method)"
2018,ASTM,"D6138-18 Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2018,ASTM,"D5864-18 Standard Test Method for  Determining Aerobic Aquatic Biodegradation of Lubricants or  Their Components"
2018,ASTM,"D6139-18 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants  or Their Components Using the Gledhill Shake Flask"
2018,ASTM,"D6384-18 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
2018,ASTM,"D4684-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2018,ASTM,"D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2018,ASTM,"D6335-18 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation  Engine Oil Simulation Test"
2018,ASTM,"D5018-18 Standard Test Method for  Shear Viscosity of Coal-Tar and Petroleum Pitches"
2018,ASTM,"D6080-18 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2018,ASTM,"D6217-18 Standard Test Method for  Particulate Contamination in Middle Distillate Fuels by Laboratory   Filtration"
2018,ASTM,"D4814-18b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5236-18a Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill   Method)"
2018,ASTM,"D6201-18 Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation"
2018,ASTM,"D4806-18 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5800-18a Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2018,ASTM,"D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration"
2018,ASTM,"D5273-18 Standard Guide for  Analysis of Propylene Concentrates"
2018,ASTM,"D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter   (Precision Method)"
2018,ASTM,"D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter   (Precision Method) (Redline)"
2018,ASTM,"D4682-18 Standard Specification for  Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle  Gasoline Engine Lubricants"
2018,ASTM,"D4682-18 Standard Specification for  Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle  Gasoline Engine Lubricants (Redline)"
2018,ASTM,"D6079-18 Standard Test Method for  Evaluating Lubricity of Diesel Fuels by the High-Frequency   Reciprocating Rig (HFRR)"
2018,ASTM,"D5191-18 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)"
2018,ASTM,"D6378-18 Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method)"
2018,ASTM,"D5599-18 Standard Test Method for  Determination of Oxygenates in Gasoline by Gas Chromatography   and Oxygen Selective Flame Ionization Detection"
2018,ASTM,"D5798-18 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2018,ASTM,"D4814-18c Standard Specification for Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D4485-18 Standard Specification for  Performance of Active API Service Category Engine Oils"
2018,ASTM,"D5762-18a Standard Test Method for  Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products  by Boat-Inlet Chemiluminescence"
2018,ASTM,"D5762-18a Standard Test Method for  Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products  by Boat-Inlet Chemiluminescence (Redline)"
2018,ASTM,"D4485-18a Standard Specification for  Performance of Active API Service Category Engine Oils"
2018,ASTM,"D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids"
2018,ASTM,"D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids (Redline)"
2018,ASTM,"D6158-18 Standard Specification for  Mineral Hydraulic Oils"
2018,ASTM,"D6046-18 Standard Classification of  Hydraulic Fluids for Environmental Impact"
2018,ASTM,"D6046-18 Standard Classification of  Hydraulic Fluids for Environmental Impact (Redline)"
2018,ASTM,"D6227-18 Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2018,ASTM,"D5443-14(2018) Standard Test Method for  Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis  in Petroleum Distillates Through 200 &#xb0;C by Multi-Dimensional  Gas Chromatography"
2018,ASTM,"D5306-92(2018) Standard Test Method for  Linear Flame Propagation Rate of Lubricating Oils and Hydraulic  Fluids"
2018,ASTM,"D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination  of Mesophase in a Pitch"
2018,ASTM,"D4296-18 Standard Practice for Sampling Pitch"
2018,ASTM,"D4814-18d Standard Specification for Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5500-18 Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2018,ASTM,"D6201-18a Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation"
2018,ASTM,"D5797-18 Standard Specification for  Methanol Fuel Blends (M51&#x2013;M85) for Methanol-Capable  Automotive Spark-Ignition Engines"
2018,ASTM,"D5798-18a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2018,ASTM,"D5598-18 Standard Test Method for  Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for  Electronic Port Fuel Injector Fouling"
2018,ASTM,"D6423-18 Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends"
2018,ASTM,"D6421-18 Standard Test Method for  Evaluating Automotive Spark-Ignition Engine Fuel for Electronic   Port Fuel Injector Fouling by Bench Procedure"
2018,ASTM,"D6378-18a Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method)"
2018,ASTM,"D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2018,ASTM,"D4806-18a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5983-18 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines  for Use as Automotive Spark-Ignition Engine Fuel"
2019,ASTM,"D4814-19 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5003-18 Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke"
2019,ASTM,"D5003-19 Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke"
2019,ASTM,"D5003-19 Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke (Redline)"
2019,ASTM,"D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2018,ASTM,"D5191-18a Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method)"
2019,ASTM,"D5191-19 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method)"
2019,ASTM,"D4422-19 Standard Test Method for  Ash in Analysis of Petroleum Coke"
2019,ASTM,"D4422-19 Standard Test Method for  Ash in Analysis of Petroleum Coke (Redline)"
2018,ASTM,"D4486-18 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2018,ASTM,"D5002-18 Standard Test Method for  Density, Relative Density, and API Gravity of Crude Oils by  Digital Density Analyzer"
2019,ASTM,"D5798-19 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2018,ASTM,"D6426-18 Standard Test Method for  Determining Filterability of Middle Distillate Fuel Oils"
2019,ASTM,"D4806-19 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2018,ASTM,"D5002-18e1 Standard Test Method for  Density, Relative Density, and API Gravity of Crude Oils by  Digital Density Analyzer"
2019,ASTM,"D5798-19a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2019,ASTM,"D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2019,ASTM,"D5453-19 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence"
2019,ASTM,"D5579-19 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2019,ASTM,"D5579-19 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test (Redline)"
2019,ASTM,"D5303-19 Standard Test Method for  Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
2019,ASTM,"D5760-19 Standard Specification for  Performance of Manual Transmission Gear Lubricants"
2019,ASTM,"D5760-19 Standard Specification for  Performance of Manual Transmission Gear Lubricants (Redline)"
2019,ASTM,"D4740-19 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2019,ASTM,"D6300-19 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2019,ASTM,"D5059-14(2019) Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy"
2019,ASTM,"D5384-14(2019) Standard Test Methods for  Chlorine in Used Petroleum Products (Field Test Kit Method)"
2019,ASTM,"D6259-15(2019) Standard Practice for  Determination of a Pooled Limit of Quantitation for a Test  Method"
2019,ASTM,"D6424-04a(2019) Standard Practice for  Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines"
2019,ASTM,"D4425-19 Standard Test Method for  Oil Separation from Lubricating Grease by Centrifuging (Koppers   Method)"
2019,ASTM,"D4425-19 Standard Test Method for  Oil Separation from Lubricating Grease by Centrifuging (Koppers   Method) (Redline)"
2019,ASTM,"D6468-08(2019) Standard Test Method for High Temperature Stability of Middle Distillate Fuels"
2019,ASTM,"D6081-19 Standard Practice for  Aquatic Toxicity Testing of Lubricants: Sample Preparation   and Results Interpretation"
2019,ASTM,"D5621-19 Standard Test Method for  Sonic Shear Stability of Hydraulic Fluids"
2019,ASTM,"D6443-14(2019)e1 Standard Test Method for  Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus,   Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength  Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction   Procedure)"
2019,ASTM,"D4860-14(2019) Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating)"
2019,ASTM,"D4892-14(2019)e1 Standard Test Method for  Density of Solid Pitch (Helium Pycnometer Method)"
2019,ASTM,"D5854-19 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum   Products"
2019,ASTM,"D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum   Products"
2019,ASTM,"D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum   Products (Redline)"
2019,ASTM,"D6121-19 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2019,ASTM,"D5968-19 Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&#x2009;&#xb0;C"
2019,ASTM,"D5662-19 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2019,ASTM,"D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   and Laboratory Infrared Spectrophotometer Based Analyzer Systems"
2019,ASTM,"D4865-19 Standard Guide for  Generation and Dissipation of Static Electricity in Petroleum  Fuel Systems"
2019,ASTM,"D5798-19b Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2019,ASTM,"D5623-19 Standard Test Method for  Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography  and Sulfur Selective Detection"
2019,ASTM,"D6423-19 Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends"
2019,ASTM,"D6384-19 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
2019,ASTM,"D5186-19 Standard Test Method for  Determination of the Aromatic Content and Polynuclear Aromatic  Content of Diesel Fuels By Supercritical Fluid Chromatography"
2019,ASTM,"D6379-11(2019) Standard Test Method for  Determination of Aromatic Hydrocarbon Types in Aviation Fuels   and Petroleum Distillates&#x2014;High Performance Liquid Chromatography   Method with Refractive Index Detection"
2019,ASTM,"D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence"
2019,ASTM,"D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark  Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet  Fluorescence (Redline)"
2019,ASTM,"D5800-19 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2019,ASTM,"D4929-19 Standard Test Method for  Determination of Organic Chloride Content in Crude Oil"
2019,ASTM,"D6186-19 Standard Test Method for  Oxidation Induction Time of Lubricating Oils by Pressure Differential  Scanning Calorimetry (PDSC)"
2019,ASTM,"D6186-19 Standard Test Method for  Oxidation Induction Time of Lubricating Oils by Pressure Differential  Scanning Calorimetry (PDSC) (Redline)"
2019,ASTM,"D4806-19a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2014,ASTM,"D4892-14 Standard Test Method for  Density of Solid Pitch &#40;Helium Pycnometer Method&#41;"
2014,ASTM,"D6443-14 Standard Test Method for  Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus,   Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength   Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction   Procedure)"
1994,ASTM,"D4420-94 Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography)"
2019,ASTM,"D5500-19 Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2019,ASTM,"D5598-19 Standard Test Method for  Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for  Electronic Port Fuel Injector Fouling"
2019,ASTM,"D6421-19 Standard Test Method for  Evaluating Automotive Spark-Ignition Engine Fuel for Electronic   Port Fuel Injector Fouling by Bench Procedure"
2019,ASTM,"D5662-19a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2019,ASTM,"D5967-19 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2019,ASTM,"D6121-19a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2019,ASTM,"D6121-19a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles (Redline)"
2019,ASTM,"D4290-19 Standard Test Method for  Determining the Leakage Tendencies of Automotive Wheel Bearing   Grease Under Accelerated Conditions"
2014,ASTM,"D4950-14 Standard Classification and Specification for  Automotive Service Greases"
2019,ASTM,"D4950-19 Standard Classification and Specification for  Automotive Service Greases"
2019,ASTM,"D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence   of Lubricating Oils Using a Temperature-Scanning Technique"
2019,ASTM,"D6299-19 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2019,ASTM,"D4485-19 Standard Specification for  Performance of Active API Service Category Engine Oils"
2019,ASTM,"D5842-19 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2019,ASTM,"D4289-19 Standard Test Method for  Elastomer Compatibility of Lubricating Greases and Fluids"
2019,ASTM,"D4626-95(2019) Standard Practice for  Calculation of Gas Chromatographic Response Factors"
2019,ASTM,"D4815-15b(2019) Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2019,ASTM,"D4951-14(2019) Standard Test Method for  Determination of Additive Elements in Lubricating Oils by Inductively  Coupled Plasma Atomic Emission Spectrometry"
2019,ASTM,"D5274-00(2019) Standard Guide for  Analysis of 1,3&#x2013;Butadiene Product"
2019,ASTM,"D5986-96(2019) Standard Test Method for  Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf  >&#x2013;C<inf>12</inf> Aromatics and Total Aromatics in Finished  Gasoline by Gas  Chromatography/Fourier Transform Infrared Spectroscopy"
2019,ASTM,"D6375-09(2019) Standard Test Method for  Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer   (TGA) Noack Method"
2019,ASTM,"D6417-15(2019) Standard Test Method for  Estimation of Engine Oil Volatility by Capillary Gas Chromatography"
2019,ASTM,"D4929-19a Standard Test Method for  Determination of Organic Chloride Content in Crude Oil"
2019,ASTM,"D5182-19 Standard Test Method for  Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)"
2019,ASTM,"D5182-19 Standard Test Method for  Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) (Redline)"
2019,ASTM,"D6300-19a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products and Lubricants"
2019,ASTM,"D6138-19 Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2019,ASTM,"D6201-19 Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation"
2019,ASTM,"D6201-19a Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation"
2019,ASTM,"D6201-19a Standard Test Method for  Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel   for Intake Valve Deposit Formation (Redline)"
2019,ASTM,"D5968-19a Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&#x2009;&#xb0;C"
2019,ASTM,"D5968-19a Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&#x2009;&#xb0;C (Redline)"
2019,ASTM,"D4814-19a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2019,ASTM,"D6022-19 Standard Practice for  Calculation of Permanent Shear Stability Index"
2019,ASTM,"D6022-19 Standard Practice for  Calculation of Permanent Shear Stability Index (Redline)"
2019,ASTM,"D6335-19 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation  Engine Oil Simulation Test"
2019,ASTM,"D6335-19 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation  Engine Oil Simulation Test (Redline)"
2019,ASTM,"D5001-19 Standard Test Method for  Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder   Lubricity Evaluator (BOCLE)"
2019,ASTM,"D5002-19 Standard Test Method for  Density, Relative Density, and API Gravity of Crude Oils by  Digital Density Analyzer"
2019,ASTM,"D5799-19 Standard Test Method for  Determination of Peroxides in Butadiene"
2019,ASTM,"D5800-19a Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2019,ASTM,"D5707-19 Standard Test Method for  Measuring Friction and Wear Properties of Lubricating Grease   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2019,ASTM,"D6425-19 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure  (EP) Lubricating Oils Using SRV Test Machine"
2019,ASTM,"D6352-19 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174&#x2009;&#xb0;C to 700&#x2009;&#xb0;C by Gas Chromatography"
2019,ASTM,"D6352-19 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174&#x2009;&#xb0;C to 700&#x2009;&#xb0;C by Gas Chromatography (Redline)"
2020,ASTM,"D4310-20 Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils"
2020,ASTM,"D5483-20 Standard Test Method for  Oxidation Induction Time of Lubricating Greases by Pressure   Differential Scanning Calorimetry"
2020,ASTM,"D4814-20 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2020,ASTM,"D4814-20a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2020,ASTM,"D5500-20 Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2020,ASTM,"D5598-20 Standard Test Method for  Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for  Electronic Port Fuel Injector Fouling"
2020,ASTM,"D5598-20 Standard Test Method for  Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for  Electronic Port Fuel Injector Fouling (Redline)"
2020,ASTM,"D6421-20 Standard Test Method for  Evaluating Automotive Spark-Ignition Engine Fuel for Electronic   Port Fuel Injector Fouling by Bench Procedure"
2020,ASTM,"D6421-20 Standard Test Method for  Evaluating Automotive Spark-Ignition Engine Fuel for Electronic   Port Fuel Injector Fouling by Bench Procedure (Redline)"
2003,ASTM,"D4241-98(2003) Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems (Withdrawn 2008)"
2003,ASTM,"D4248-98(2003) Standard Practice for Design of Steam Turbine Generator Oil Systems (Withdrawn 2008)"
1998,ASTM,"D4294-98 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy"
2004,ASTM,"D4305-98a(2004)e1 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures (Withdrawn 2010)"
1999,ASTM,"D4421-94(1999) Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004)"
2014,ASTM,"D4485-14 Standard Specification for  Performance of Active API Service Category Engine Oils"
2015,ASTM,"D4485-15 Standard Specification for  Performance of Active API Service Category Engine Oils"
2020,ASTM,"D4806-20 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2013,ASTM,"D4814-13b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2015,ASTM,"D4815-15 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2002,ASTM,"D5119-02 Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (Withdrawn 2003)"
2001,ASTM,"D5302-01a Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)"
2017,ASTM,"D5372-17 Standard Guide for  Evaluation of Hydrocarbon Heat Transfer Fluids"
1999,ASTM,"D5480-95(1999)e1 Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003)"
1998,ASTM,"D5533-98e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine (Withdrawn 2003)"
2004,ASTM,"D5620-94(2004) Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine (Withdrawn 2010)"
2015,ASTM,"D5709-09(2015) Standard Test Method for  Sieve Analysis of Petroleum Coke"
2020,ASTM,"D5798-20 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
1998,ASTM,"D5844-98 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)"
2009,ASTM,"D5862-09 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)"
2003,ASTM,"D5901-03 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)"
2013,ASTM,"D5968-06(2013) Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121&#8201;&deg;C"
2002,ASTM,"D6202-02 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009)"
2003,ASTM,"D6293-98(2003)e1 Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography (Withdrawn 2009)"
1999,ASTM,"D6422-99 Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends (Withdrawn 2007)"
2004,ASTM,"D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)"
2015,ASTM,"D5708-15 Standard Test Methods for  Determination of Nickel, Vanadium, and Iron in Crude Oils and   Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission   Spectrometry (Redline)"
2017,ASTM,"D4629-17 Standard Test Method for  Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative  Combustion and Chemiluminescence Detection (Redline)"
2017,ASTM,"D5853-17a Standard Test Method for  Pour Point of Crude Oils (Redline)"
2018,ASTM,"D5185-18 Standard Test Method for  Multielement Determination of Used and Unused Lubricating Oils  and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry  (ICP-AES) (Redline)"
2020,ASTM,"D4953-20 Standard Test Method for  Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry   Method)"
2020,ASTM,"D4953-20 Standard Test Method for  Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry   Method) (Redline)"
2020,ASTM,"D5191-20 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method)"
2020,ASTM,"D5482-20 Standard Test Method for  Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method&#x2014;Atmospheric)"
2020,ASTM,"D5275-20 Standard Test Method for  Fuel Injector Shear Stability Test (FISST) for Polymer Containing   Fluids"
2020,ASTM,"D5275-20 Standard Test Method for  Fuel Injector Shear Stability Test (FISST) for Polymer Containing   Fluids (Redline)"
2020,ASTM,"D5621-20 Standard Test Method for  Sonic Shear Stability of Hydraulic Fluids"
2020,ASTM,"D5621-20 Standard Test Method for  Sonic Shear Stability of Hydraulic Fluids (Redline)"
2020,ASTM,"D5704-20 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2020,ASTM,"D6423-20 Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends"
2020,ASTM,"D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing  Greater than 20&#x2009;% Ethanol by Gas Chromatography"
2020,ASTM,"D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing  Greater than 20&#x2009;% Ethanol by Gas Chromatography (Redline)"
2020,ASTM,"D6299-20 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2020,ASTM,"D6378-20 Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method)"
2020,ASTM,"D5059-20 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy"
2019,ASTM,"D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling   Range from 174&#x2009;&#xb0;C to 700&#x2009;&#xb0;C by Gas Chromatography"
2020,ASTM,"D5500-20a Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation"
2020,ASTM,"D5500-20a Standard Test Method for  Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine  Fuel for Intake Valve Deposit Formation (Redline)"
2020,ASTM,"D4290-20 Standard Test Method for  Determining the Leakage Tendencies of Automotive Wheel Bearing   Grease Under Accelerated Conditions"
2020,ASTM,"D4290-20 Standard Test Method for  Determining the Leakage Tendencies of Automotive Wheel Bearing   Grease Under Accelerated Conditions (Redline)"
2020,ASTM,"D4530-15(2020) Standard Test Method for  Determination of Carbon Residue (Micro Method)"
2020,ASTM,"D4807-05(2020) Standard Test Method for Sediment in Crude Oil by Membrane Filtration"
2020,ASTM,"D4927-15(2020) Standard Test Methods for  Elemental Analysis of Lubricant and Additive Components&#x2014;Barium,   Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray   Fluorescence Spectroscopy"
2020,ASTM,"D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)"
2020,ASTM,"D5985-02(2020) Standard Test Method for  Pour Point of Petroleum Products (Rotational Method)"
2020,ASTM,"D4312-20 Standard Test Method for  Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)"
2020,ASTM,"D4312-20 Standard Test Method for  Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method) (Redline)"
2020,ASTM,"D4683-20 Standard Test Method for  Measuring Viscosity of New and Used Engine Oils at High Shear   Rate and High Temperature by Tapered Bearing Simulator Viscometer   at 150&#x2009;&#xb0;C"
2020,ASTM,"D4683-20 Standard Test Method for  Measuring Viscosity of New and Used Engine Oils at High Shear   Rate and High Temperature by Tapered Bearing Simulator Viscometer   at 150&#x2009;&#xb0;C (Redline)"
2020,ASTM,"D4684-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2020,ASTM,"D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2020,ASTM,"D5800-20 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2020,ASTM,"D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence  of Lubricating Oils Using a Temperature-Scanning Technique"
2020,ASTM,"D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence  of Lubricating Oils Using a Temperature-Scanning Technique"
2020,ASTM,"D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence  of Lubricating Oils Using a Temperature-Scanning Technique (Redline)"
2020,ASTM,"D5293-20 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator"
2020,ASTM,"D5293-20 Standard Test Method for  Apparent Viscosity of Engine Oils and Base Stocks Between &#x2013;10&#x2009;&#xb0;C   and &#x2013;35&#x2009;&#xb0;C Using Cold-Cranking Simulator (Redline)"
2020,ASTM,"D4378-20 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas,  and Combined Cycle Turbines"
2020,ASTM,"D5771-20 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical  Detection Stepped Cooling Method)"
2020,ASTM,"D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method"
2020,ASTM,"D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method (Redline)"
2020,ASTM,"D4746-20 Standard Test Method for  Determination of Quinoline Insolubles (QI) in Tar and Pitch  by Pressure Filtration"
2020,ASTM,"D4746-20 Standard Test Method for  Determination of Quinoline Insolubles (QI) in Tar and Pitch  by Pressure Filtration (Redline)"
2020,ASTM,"D5481-13(2020) Standard Test Method for  Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer"
2020,ASTM,"D5481-20 Standard Test Method for  Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer"
2020,ASTM,"D5772-20 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Linear  Cooling Rate Method)"
2020,ASTM,"D5773-20 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Constant  Cooling Rate Method)"
2020,ASTM,"D6278-20 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus"
2020,ASTM,"D6278-20a Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus"
2020,ASTM,"D6278-20a Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European  Diesel Injector Apparatus (Redline)"
2020,ASTM,"D6300-20 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods  for Petroleum Products, Liquid Fuels, and Lubricants"
2020,ASTM,"D6300-20a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products, Liquid Fuels, and Lubricants"
2020,ASTM,"D5769-20 Standard Test Method for  Determination of Benzene, Toluene, and Total Aromatics in Finished   Gasolines by Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D4306-20 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace  Contamination"
2020,ASTM,"D4306-20 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace  Contamination (Redline)"
2020,ASTM,"D4893-20 Standard Test Method for  Determination of Pitch Volatility"
2020,ASTM,"D4893-20 Standard Test Method for  Determination of Pitch Volatility (Redline)"
2020,ASTM,"D6377-20 Standard Test Method for  Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf  >&#x2009;(Expansion  Method)"
2020,ASTM,"D6377-20 Standard Test Method for  Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf  >&#x2009;(Expansion  Method) (Redline)"
2020,ASTM,"D5708-15(2020)e1 Standard Test Methods for  Determination of Nickel, Vanadium, and Iron in Crude Oils and   Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission   Spectrometry"
2019,ASTM,"D5001-19e1 Standard Test Method for  Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder   Lubricity Evaluator (BOCLE)"
2020,ASTM,"D5580-15(2020) Standard Test Method for  Determination of Benzene, Toluene, Ethylbenzene,  <emph  type=""ital""> p/m</emph>-Xylene, <emph type=""ital"">o</emph>-Xylene,  C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished  Gasoline by Gas Chromatography"
2020,ASTM,"D5303-20 Standard Test Method for  Trace Carbonyl Sulfide in Propylene by Gas Chromatography"
2020,ASTM,"D5303-20 Standard Test Method for  Trace Carbonyl Sulfide in Propylene by Gas Chromatography (Redline)"
2020,ASTM,"D4740-20 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test"
2020,ASTM,"D4740-20 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test (Redline)"
2020,ASTM,"D4485-20 Standard Specification for  Performance of Active API Service Category Engine Oils"
2020,ASTM,"D4485-20 Standard Specification for  Performance of Active API Service Category Engine Oils (Redline)"
2020,ASTM,"D5304-20 Standard Test Method for  Assessing Middle Distillate Fuel Storage Stability by Oxygen   Overpressure"
2020,ASTM,"D5304-20 Standard Test Method for  Assessing Middle Distillate Fuel Storage Stability by Oxygen   Overpressure (Redline)"
2020,ASTM,"D6081-20 Standard Practice for  Aquatic Toxicity Testing of Lubricants: Sample Preparation  and Results Interpretation"
2020,ASTM,"D6299-20a Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2020,ASTM,"D5705-20 Standard Test Method for  Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual  Fuel Oils"
2020,ASTM,"D5705-20 Standard Test Method for  Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual  Fuel Oils (Redline)"
2020,ASTM,"D4310-20a Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils"
2020,ASTM,"D6423-20a Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends"
2020,ASTM,"D6423-20a Standard Test Method for  Determination of pHe of Denatured Fuel Ethanol and Ethanol  Fuel Blends (Redline)"
2020,ASTM,"D5186-20 Standard Test Method for  Determination of the Aromatic Content and Polynuclear Aromatic  Content of Diesel Fuels By Supercritical Fluid Chromatography"
2020,ASTM,"D5482-20a Standard Test Method for  Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method&#x2014;Atmospheric)"
2020,ASTM,"D5482-20a Standard Test Method for  Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method&#x2014;Atmospheric) (Redline)"
2020,ASTM,"D5372-20 Standard Guide for  Evaluation of Hydrocarbon Heat Transfer Fluids"
2020,ASTM,"D5372-20 Standard Guide for  Evaluation of Hydrocarbon Heat Transfer Fluids (Redline)"
2020,ASTM,"D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2020,ASTM,"D5481-20a Standard Test Method for  Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer"
2020,ASTM,"D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2020,ASTM,"D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer  Based Analyzer Systems"
2020,ASTM,"D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer  Based Analyzer Systems"
2020,ASTM,"D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature"
2020,ASTM,"D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine  Oils at Low Temperature (Redline)"
2020,ASTM,"D4177-20 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2020,ASTM,"D6300-20b Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods  for Petroleum Products, Liquid Fuels, and Lubricants"
2018,ASTM,"D5305-18e1 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2021,ASTM,"D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer"
2021,ASTM,"D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate  by Tapered-Plug Viscometer (Redline)"
2021,ASTM,"D5481-21 Standard Test Method for  Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer"
2021,ASTM,"D5481-21 Standard Test Method for  Measuring Apparent Viscosity at High-Temperature and High-Shear   Rate by Multicell Capillary Viscometer (Redline)"
2020,ASTM,"D4814-20b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D4814-21 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2020,ASTM,"D4927-20 Standard Test Methods for  Elemental Analysis of Lubricant and Additive Components—Barium,   Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray   Fluorescence Spectroscopy"
2020,ASTM,"D4927-20 Standard Test Methods for  Elemental Analysis of Lubricant and Additive Components—Barium,   Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray   Fluorescence Spectroscopy (Redline)"
2021,ASTM,"D5187-21 Standard Test Method for  Determination of Crystallite Size (L<inf>c</inf>) of Calcined  Petroleum Coke by X-Ray Diffraction"
2021,ASTM,"D5187-21 Standard Test Method for  Determination of Crystallite Size (L<inf>c</inf>) of Calcined  Petroleum Coke by X-Ray Diffraction (Redline)"
2020,ASTM,"D6304-20 Standard Test Method for  Determination of Water in Petroleum Products, Lubricating Oils,   and Additives by Coulometric Karl Fischer Titration"
2020,ASTM,"D6304-20 Standard Test Method for  Determination of Water in Petroleum Products, Lubricating Oils,   and Additives by Coulometric Karl Fischer Titration (Redline)"
2021,ASTM,"D5771-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical  Detection Stepped Cooling Method)"
2021,ASTM,"D5771-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical  Detection Stepped Cooling Method) (Redline)"
2021,ASTM,"D5772-21 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Linear  Cooling Rate Method)"
2021,ASTM,"D5772-21 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Linear  Cooling Rate Method) (Redline)"
2021,ASTM,"D5773-21 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Constant  Cooling Rate Method)"
2021,ASTM,"D5773-21 Standard Test Method for  Cloud Point of Petroleum Products and Liquid Fuels (Constant  Cooling Rate Method) (Redline)"
2021,ASTM,"D4419-90(2021) Standard Test Method for  Measurement of Transition Temperatures of Petroleum Waxes by  Differential Scanning Calorimetry (DSC)"
2021,ASTM,"D6447-09(2021) Standard Test Method for  Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric  Analysis"
2000,ASTM,"D5119-00 Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine"
2002,ASTM,"D5307-97(2002)e1 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography"
2001,ASTM,"D6202-01 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine"
1987,ASTM,"D4681-87 Specification For Lubricants For Two-Stroke-Cycle Gasoline Engines- (TSC-4) (Withdrawn 1995)"
1990,ASTM,"D4738-90 Practice For Calibration Of Upright Cylindrical Tanks Using Optical Reference Line Method (Withdrawn 1995)"
1988,ASTM,"D4862-88 Test Method For Evaluating Hydraulic Transmission Fluid Antiwear Properties (Withdrawn 1995)"
1989,ASTM,"D4997-89 Test Methods for Evaluation of Water Sensitivity of Multi-Purpose Power Transmission Fluids (Withdrawn 1995)"
1989,ASTM,"D4999-89 Test Method for Evaluating of Wet, Bronze-Faced, Friction Brakes (Withdrawn 1995)"
1989,ASTM,"D5005-89 Test Method for Evaluation of Fluids for Effects on Friction and Wear of Wet Clutches (Withdrawn 1995)"
1991,ASTM,"D5290-91 Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)"
1992,ASTM,"D5294-92 Standard Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1997"
1985,ASTM,"D4484-85 Test Method for Inorganic Particles in Marine Residual Fuel Oils by Selective Centrifugal Separation (Withdrawn 1993)"
1994,ASTM,"D4816-94 Standard Test Method for Specific Heat of Aircraft Turbine Fuels by Thermal Analysis (Withdrawn 1999)"
1991,ASTM,"D5189-91 Test Method for Temperature Corresponding to Vapor-Liquid Ratio of 20 for Gasoline and Gasoline-Oxgenate Blends (Bomb Method) (Withdrawn 1993)"
2021,ASTM,"D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision   Meter"
2021,ASTM,"D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision   Meter (Redline)"
2021,ASTM,"D5580-21 Standard Test Method for  Determination of Benzene, Toluene, Ethylbenzene,  <emph  type=""ital""> p/m</emph>-Xylene, <emph type=""ital"">o</emph>-Xylene,  C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished  Gasoline by Gas Chromatography"
2021,ASTM,"D5580-21 Standard Test Method for  Determination of Benzene, Toluene, Ethylbenzene,  <emph  type=""ital""> p/m</emph>-Xylene, <emph type=""ital"">o</emph>-Xylene,  C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished  Gasoline by Gas Chromatography (Redline)"
2021,ASTM,"D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy"
2021,ASTM,"D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy (Redline)"
2021,ASTM,"D4806-21 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D4814-21a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D6300-21 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods  for Petroleum Products, Liquid Fuels, and Lubricants"
2021,ASTM,"D6299-21 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2021,ASTM,"D5183-21 Standard Test Method for  Determination of the Coefficient of Friction of Lubricants  Using the Four-Ball Wear Test Machine"
2021,ASTM,"D5006-11(2021) Standard Test Method for  Measurement of Fuel System Icing Inhibitors (Ether Type) in   Aviation Fuels"
2021,ASTM,"D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,  Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems"
2021,ASTM,"D5983-21 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines  for Use as Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D5983-21 Standard Specification for  Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines  for Use as Automotive Spark-Ignition Engine Fuel (Redline)"
2021,ASTM,"D5967-21 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine"
2021,ASTM,"D5967-21 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine (Redline)"
2021,ASTM,"D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester"
1987,ASTM,"D4736-87e1 Test Method For Evaluating Friction Retention Characteristics Of Oils Used In Oil Cooled Bronze Faced Friction Clutches"
2021,ASTM,"D6379-21 Standard Test Method for  Determination of Aromatic Hydrocarbon Types in Aviation Fuels   and Petroleum Distillates—High Performance Liquid Chromatography   Method with Refractive Index Detection"
2021,ASTM,"D6379-21 Standard Test Method for  Determination of Aromatic Hydrocarbon Types in Aviation Fuels   and Petroleum Distillates—High Performance Liquid Chromatography   Method with Refractive Index Detection (Redline)"
2021,ASTM,"D5502-21 Standard Test Method for  Apparent Density by Physical Measurements of Manufactured Anode   and Cathode Carbon Used by the Aluminum Industry"
2021,ASTM,"D5502-21 Standard Test Method for  Apparent Density by Physical Measurements of Manufactured Anode   and Cathode Carbon Used by the Aluminum Industry (Redline)"
2021,ASTM,"D5797-21 Standard Specification for  Methanol Fuel Blends (M51–M85) for Methanol-Capable  Automotive Spark-Ignition Engines"
2021,ASTM,"D5797-21 Standard Specification for  Methanol Fuel Blends (M51–M85) for Methanol-Capable  Automotive Spark-Ignition Engines (Redline)"
2021,ASTM,"D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines"
2021,ASTM,"D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition  Engines (Redline)"
2021,ASTM,"D5800-21 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method"
2021,ASTM,"D5800-21 Standard Test Method for  Evaporation Loss of Lubricating Oils by the Noack Method (Redline)"
2021,ASTM,"D6217-21 Standard Test Method for  Particulate Contamination in Middle Distillate Fuels by Laboratory   Filtration<rangeref></rangeref  >"
2021,ASTM,"D6217-21 Standard Test Method for  Particulate Contamination in Middle Distillate Fuels by Laboratory   Filtration<rangeref></rangeref  > (Redline)"
2021,ASTM,"D4806-21a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D4806-21a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use  as Automotive Spark-Ignition Engine Fuel (Redline)"
2021,ASTM,"D6379-21e1 Standard Test Method for  Determination of Aromatic Hydrocarbon Types in Aviation Fuels   and Petroleum Distillates—High Performance Liquid Chromatography   Method with Refractive Index Detection"
2021,ASTM,"D4307-17(2021) Standard Practice for  Preparation of Liquid Blends for Use as Analytical Standards"
2021,ASTM,"D4693-07(2021) Standard Test Method for  Low-Temperature Torque of Grease-Lubricated Wheel Bearings"
2021,ASTM,"D4998-13(2021) Standard Test Method for  Evaluating Wear Characteristics of Tractor Hydraulic Fluids"
2021,ASTM,"D5442-17(2021) Standard Test Method for  Analysis of Petroleum Waxes by Gas Chromatography"
2021,ASTM,"D4625-21 Standard Test Method for  Middle Distillate Fuel Storage Stability at 43 °C  (110 °F)"
2021,ASTM,"D4625-21 Standard Test Method for  Middle Distillate Fuel Storage Stability at 43 °C  (110 °F) (Redline)"
2021,ASTM,"D5845-21 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol   and  <emph type=""ital"">tert</emph>-Butanol in Gasoline by Infrared   Spectroscopy"
2021,ASTM,"D5845-21 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol   and  <emph type=""ital"">tert</emph>-Butanol in Gasoline by Infrared   Spectroscopy (Redline)"
2021,ASTM,"D4737-21 Standard Test Method for  Calculated Cetane Index by Four Variable Equation"
2021,ASTM,"D4737-21 Standard Test Method for  Calculated Cetane Index by Four Variable Equation (Redline)"
2021,ASTM,"D5291-21 Standard Test Methods for  Instrumental Determination of Carbon, Hydrogen, and Nitrogen   in Petroleum Products and Lubricants"
2021,ASTM,"D5291-21 Standard Test Methods for  Instrumental Determination of Carbon, Hydrogen, and Nitrogen   in Petroleum Products and Lubricants (Redline)"
2021,ASTM,"D5969-21 Standard Test Method for  Corrosion-Preventive Properties of Lubricating Greases in Presence   of Dilute Synthetic Sea Water Environments"
2021,ASTM,"D5969-21 Standard Test Method for  Corrosion-Preventive Properties of Lubricating Greases in Presence   of Dilute Synthetic Sea Water Environments (Redline)"
2021,ASTM,"D4291-21 Standard Test Method for  Trace Ethylene Glycol in Used Engine Oil"
2021,ASTM,"D4291-21 Standard Test Method for  Trace Ethylene Glycol in Used Engine Oil (Redline)"
2021,ASTM,"D5134-21 Standard Test Method for  Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography"
2021,ASTM,"D5134-21 Standard Test Method for  Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography (Redline)"
2021,ASTM,"D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography"
2021,ASTM,"D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography (Redline)"
2021,ASTM,"D6160-21 Standard Test Method for  Determination of Polychlorinated Biphenyls (PCBs) in Waste  Materials by Gas Chromatography"
2021,ASTM,"D6160-21 Standard Test Method for  Determination of Polychlorinated Biphenyls (PCBs) in Waste  Materials by Gas Chromatography (Redline)"
2021,ASTM,"D4814-21c Standard Specification for Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D4814-21b Standard Specification for Automotive Spark-Ignition Engine Fuel"
2021,ASTM,"D5483-21 Standard Test Method for  Oxidation Induction Time of Lubricating Greases by Pressure   Differential Scanning Calorimetry"
2021,ASTM,"D5483-21 Standard Test Method for  Oxidation Induction Time of Lubricating Greases by Pressure   Differential Scanning Calorimetry (Redline)"
2021,ASTM,"D5183-21a Standard Test Method for  Determination of the Coefficient of Friction of Lubricants  Using the Four-Ball Wear Test Machine"
2021,ASTM,"D5183-21a Standard Test Method for  Determination of the Coefficient of Friction of Lubricants  Using the Four-Ball Wear Test Machine (Redline)"
2021,ASTM,"D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by   Cooling Curve Analysis"
2021,ASTM,"D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by   Cooling Curve Analysis (Redline)"
2021,ASTM,"D4289-21 Standard Test Method for  Elastomer Compatibility of Lubricating Greases and Fluids"
2021,ASTM,"D4289-21 Standard Test Method for  Elastomer Compatibility of Lubricating Greases and Fluids (Redline)"
2021,ASTM,"D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive   X-ray Fluorescence  Spectrometry"
2021,ASTM,"D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive   X-ray Fluorescence  Spectrometry (Redline)"
2021,ASTM,"D4860-21 Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating)"
2022,ASTM,"D5599-22 Standard Test Method for  Determination of Oxygenates in Gasoline by Gas Chromatography   and Oxygen Selective Flame Ionization Detection"
2022,ASTM,"D5599-22 Standard Test Method for  Determination of Oxygenates in Gasoline by Gas Chromatography   and Oxygen Selective Flame Ionization Detection (Redline)"
2022,ASTM,"D6081-22 Standard Practice for  Aquatic Toxicity Testing of Lubricants: Sample Preparation  and Results Interpretation"
2022,ASTM,"D6081-22 Standard Practice for  Aquatic Toxicity Testing of Lubricants: Sample Preparation  and Results Interpretation (Redline)"
2022,ASTM,"D6139-22 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants  or Their Components Using the Gledhill Shake Flask"
2022,ASTM,"D6139-22 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants  or Their Components Using the Gledhill Shake Flask (Redline)"
2022,ASTM,"D6224-22 Standard Practice for  In-Service Monitoring of Lubricating Oil for Auxiliary Power   Plant Equipment"
2022,ASTM,"D6384-22 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants"
2022,ASTM,"D6384-22 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants (Redline)"
2022,ASTM,"D5704-22 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2022,ASTM,"D5966-22 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty   Diesel Engine"
2022,ASTM,"D4871-11(2022) Standard Guide for  Universal Oxidation/Thermal Stability Test Apparatus"
2022,ASTM,"D5186-22 Standard Test Method for  Determination of the Aromatic Content and Polynuclear Aromatic  Content of Diesel Fuels By Supercritical Fluid Chromatography"
2022,ASTM,"D5186-22 Standard Test Method for  Determination of the Aromatic Content and Polynuclear Aromatic  Content of Diesel Fuels By Supercritical Fluid Chromatography (Redline)"
2022,ASTM,"D6296-22 Standard Test Method for  Total Olefins in Spark-ignition Engine Fuels by Multidimensional  Gas Chromatography"
2022,ASTM,"D6296-22 Standard Test Method for  Total Olefins in Spark-ignition Engine Fuels by Multidimensional  Gas Chromatography (Redline)"
2022,ASTM,"D5709-22 Standard Test Method for  Sieve Analysis of Petroleum Coke"
2022,ASTM,"D5709-22 Standard Test Method for  Sieve Analysis of Petroleum Coke (Redline)"
2022,ASTM,"D6374-22 Standard Test Method for  Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure"
2022,ASTM,"D6374-22 Standard Test Method for  Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure (Redline)"
2022,ASTM,"D6299-22 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2022,ASTM,"D6468-22 Standard Test Method for High Temperature Stability of Middle Distillate Fuels"
2022,ASTM,"D6468-22 Standard Test Method for High Temperature Stability of Middle Distillate Fuels (Redline)"
2022,ASTM,"D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by  Multiple Headspace Extraction and Sulfur Specific Detection"
2022,ASTM,"D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by  Multiple Headspace Extraction and Sulfur Specific Detection (Redline)"
2022,ASTM,"D6277-07(2022) Standard Test Method for  Determination of Benzene in Spark-Ignition Engine Fuels Using   Mid Infrared Spectroscopy"
2022,ASTM,"D4815-22 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography"
2022,ASTM,"D4815-22 Standard Test Method for  Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol   and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography (Redline)"
2022,ASTM,"D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer  Based Analyzer Systems"
2019,ASTM,"D5579-19e1 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants  in a Cyclic Durability Test"
2019,ASTM,"D5968-19ae1 Standard Test Method for  Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C"
2019,ASTM,"D6121-19ae1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions  of Low Speed and High Torque Used for Final Hypoid Drive Axles"
2022,ASTM,"D4310-22 Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils"
2022,ASTM,"D5763-22 Standard Test Method for  Oxidation and Thermal Stability Characteristics of Gear Oils   Using Universal Glassware"
2022,ASTM,"D6351-22 Standard Test Method for  Determination of Low Temperature Fluidity and Appearance of   Hydraulic Fluids"
2022,ASTM,"D6351-22 Standard Test Method for  Determination of Low Temperature Fluidity and Appearance of   Hydraulic Fluids (Redline)"
2022,ASTM,"D4378-22 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas,  and Combined Cycle Turbines"
2022,ASTM,"D4715-98(2022)e1 Standard Test Method for  Coking Value of Tar and Pitch (Alcan)"
2022,ASTM,"D5949-16(2022) Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing   Method)"
2022,ASTM,"D4860-22 Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating)"
2022,ASTM,"D4860-22 Standard Test Method for  Free Water and Particulate Contamination in Middle Distillate   Fuels (Clear and Bright Numerical Rating) (Redline)"
2022,ASTM,"D5002-22 Standard Test Method for  Density, Relative Density, and API Gravity of Crude Oils by  Digital Density Analyzer"
2022,ASTM,"D5002-22 Standard Test Method for  Density, Relative Density, and API Gravity of Crude Oils by  Digital Density Analyzer (Redline)"
2022,ASTM,"D4177-22 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2022,ASTM,"D4177-22 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products (Redline)"
2022,ASTM,"D6378-22 Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method)"
2022,ASTM,"D6378-22 Standard Test Method for  Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum   Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple   Expansion Method) (Redline)"
2022,ASTM,"D5769-22 Standard Test Method for  Determination of Benzene, Toluene, and Total Aromatics in Finished   Gasolines by Gas Chromatography/Mass Spectrometry"
2022,ASTM,"D5769-22 Standard Test Method for  Determination of Benzene, Toluene, and Total Aromatics in Finished   Gasolines by Gas Chromatography/Mass Spectrometry (Redline)"
2022,ASTM,"D5056-22 Standard Test Method for  Trace Metals in Petroleum Coke by Atomic Absorption"
2022,ASTM,"D5056-22 Standard Test Method for  Trace Metals in Petroleum Coke by Atomic Absorption (Redline)"
2022,ASTM,"D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing,  Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and   Atomic Absorption Spectrometry"
2022,ASTM,"D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing,  Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and   Atomic Absorption Spectrometry (Redline)"
2022,ASTM,"D5600-22 Standard Test Method for  Trace Metals in Petroleum Coke by Inductively Coupled Plasma   Atomic Emission Spectrometry (ICP-AES)"
2022,ASTM,"D5600-22 Standard Test Method for  Trace Metals in Petroleum Coke by Inductively Coupled Plasma   Atomic Emission Spectrometry (ICP-AES) (Redline)"
2022,ASTM,"D4627-22 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking  Fluids"
2022,ASTM,"D4627-22 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking  Fluids (Redline)"
2022,ASTM,"D4929-22 Standard Test Method for  Determination of Organic Chloride Content in Crude Oil"
2022,ASTM,"D4929-22 Standard Test Method for  Determination of Organic Chloride Content in Crude Oil (Redline)"
2022,ASTM,"D6074-15(2022) Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils"
2022,ASTM,"D6448-16(2022) Standard Specification for  Industrial Burner Fuels from Used Lubricating Oils"
2022,ASTM,"D5191-22 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method)"
2022,ASTM,"D5191-22 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini  Method) (Redline)"
2022,ASTM,"D4418-22 Standard Practice for  Receipt, Storage, and Handling of Fuels for Gas Turbines"
2022,ASTM,"D4418-22 Standard Practice for  Receipt, Storage, and Handling of Fuels for Gas Turbines (Redline)"
2022,ASTM,"D4310-22a Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils"
2022,ASTM,"D4310-22a Standard Test Method for  Determination of Sludging and Corrosion Tendencies of Inhibited   Mineral Oils (Redline)"
2022,ASTM,"D5763-22a Standard Test Method for  Oxidation and Thermal Stability Characteristics of Gear Oils   Using Universal Glassware"
2022,ASTM,"D5763-22a Standard Test Method for  Oxidation and Thermal Stability Characteristics of Gear Oils   Using Universal Glassware (Redline)"
2022,ASTM,"D6082-22 Standard Test Method for  High Temperature Foaming Characteristics of Lubricating Oils"
2022,ASTM,"D6203-22 Standard Test Method for  Thermal Stability of Way Lubricants"
2022,ASTM,"D6203-22 Standard Test Method for  Thermal Stability of Way Lubricants (Redline)"
2022,ASTM,"D4814-22 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2022,ASTM,"D6299-22e1 Standard Practice for  Applying Statistical Quality Assurance and Control Charting  Techniques to Evaluate Analytical Measurement System Performance"
2022,ASTM,"D4485-22e1 Standard Specification for  Performance of Active API Service Category Engine Oils"
2022,ASTM,"D4485-22 Standard Specification for  Performance of Active API Service Category Engine Oils"
2022,ASTM,"D4539-22 Standard Test Method for  Filterability of Diesel Fuels by Low-Temperature Flow Test   (LTFT)"
2022,ASTM,"D4539-22 Standard Test Method for  Filterability of Diesel Fuels by Low-Temperature Flow Test   (LTFT) (Redline)"
2022,ASTM,"D4304-22 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas  Turbines"
2022,ASTM,"D4304-22 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas  Turbines (Redline)"
2022,ASTM,"D6184-22 Standard Test Method for  Oil Separation from Lubricating Grease (Conical Sieve Method)"
2022,ASTM,"D6184-22 Standard Test Method for  Oil Separation from Lubricating Grease (Conical Sieve Method) (Redline)"
2022,ASTM,"D4870-22 Standard Test Method for  Determination of Total Sediment in Residual Fuels"
2022,ASTM,"D4870-22 Standard Test Method for  Determination of Total Sediment in Residual Fuels (Redline)"
2022,ASTM,"D5863-22 Standard Test Methods for  Determination of Nickel, Vanadium, Iron, and Sodium in Crude   Oils and Residual Fuels by Flame Atomic Absorption Spectrometry"
2022,ASTM,"D5863-22 Standard Test Methods for  Determination of Nickel, Vanadium, Iron, and Sodium in Crude   Oils and Residual Fuels by Flame Atomic Absorption Spectrometry (Redline)"
2022,ASTM,"D4293-22 Standard Specification for Phosphate Ester-Based Fluids for Turbine Lubrication and Steam  Turbine Electro-Hydraulic Control (EHC) Applications"
2022,ASTM,"D4293-22 Standard Specification for Phosphate Ester-Based Fluids for Turbine Lubrication and Steam  Turbine Electro-Hydraulic Control (EHC) Applications (Redline)"
2022,ASTM,"D4950-22 Standard Classification and Specification for  Automotive Service Greases"
2022,ASTM,"D4950-22 Standard Classification and Specification for  Automotive Service Greases (Redline)"
2022,ASTM,"D6426-22 Standard Test Method for  Determining Filterability of Middle Distillate Fuel Oils"
2022,ASTM,"D6426-22 Standard Test Method for  Determining Filterability of Middle Distillate Fuel Oils (Redline)"
2022,ASTM,"D5704-22a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles"
2022,ASTM,"D5704-22a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating  Oils Used for Manual Transmissions and Final Drive Axles (Redline)"
2022,ASTM,"D6079-22 Standard Test Method for  Evaluating Lubricity of Diesel Fuels by the High-Frequency   Reciprocating Rig (HFRR)"
2022,ASTM,"D6079-22 Standard Test Method for  Evaluating Lubricity of Diesel Fuels by the High-Frequency   Reciprocating Rig (HFRR) (Redline)"
2023,ASTM,"D5305-23 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor"
2023,ASTM,"D5305-23 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor (Redline)"
2023,ASTM,"D5443-23 Standard Test Method for  Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis  in Petroleum Distillates Through 200 °C by Multi-Dimensional  Gas Chromatography"
2023,ASTM,"D5443-23 Standard Test Method for  Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis  in Petroleum Distillates Through 200 °C by Multi-Dimensional  Gas Chromatography (Redline)"
2023,ASTM,"D5972-23 Standard Test Method for  Freezing Point of Aviation Fuels (Automatic Phase Transition   Method)<rangeref></rangeref  >"
2023,ASTM,"D5972-23 Standard Test Method for  Freezing Point of Aviation Fuels (Automatic Phase Transition   Method)<rangeref></rangeref  > (Redline)"
2022,ASTM,"D4177-22e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products"
2023,ASTM,"D6259-23 Standard Practice for  Determination of a Pooled Limit of Quantitation for a Test  Method"
2023,ASTM,"D6259-23 Standard Practice for  Determination of a Pooled Limit of Quantitation for a Test  Method (Redline)"
2023,ASTM,"D5452-23 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration"
2023,ASTM,"D5452-23 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Redline)"
2023,ASTM,"D4628-23 Standard Test Method for  Analysis of Barium, Calcium, Magnesium, and Zinc in Unused   Lubricating Oils by Atomic Absorption Spectrometry"
2023,ASTM,"D4628-23 Standard Test Method for  Analysis of Barium, Calcium, Magnesium, and Zinc in Unused   Lubricating Oils by Atomic Absorption Spectrometry (Redline)"
2023,ASTM,"D4423-23 Standard Test Method for  Determination of Carbonyls in C<inf>4</inf> Hydrocarbons"
2023,ASTM,"D4423-23 Standard Test Method for  Determination of Carbonyls in C<inf>4</inf> Hydrocarbons (Redline)"
2023,ASTM,"D5799-23 Standard Test Method for  Determination of Peroxides in Butadiene"
2023,ASTM,"D5799-23 Standard Test Method for  Determination of Peroxides in Butadiene (Redline)"
2023,ASTM,"D6159-23 Standard Test Method for  Determination of Hydrocarbon Impurities in Ethylene by Gas  Chromatography"
2023,ASTM,"D6159-23 Standard Test Method for  Determination of Hydrocarbon Impurities in Ethylene by Gas  Chromatography (Redline)"
2023,ASTM,"D6138-23a Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2023,ASTM,"D6138-23a Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test) (Redline)"
2023,ASTM,"D6138-23 Standard Test Method for  Determination of Corrosion-Preventive Properties of Lubricating   Greases Under Dynamic Wet Conditions (Emcor Test)"
2023,ASTM,"D4930-23 Standard Test Method for  Dust Control Material on Calcined Petroleum Coke"
2023,ASTM,"D4930-23 Standard Test Method for  Dust Control Material on Calcined Petroleum Coke (Redline)"
2023,ASTM,"D5761-23 Standard Practice for  Emulsification/Suspension of Multiphase Fluid Waste Materials"
2023,ASTM,"D5761-23 Standard Practice for  Emulsification/Suspension of Multiphase Fluid Waste Materials (Redline)"
2023,ASTM,"D5984-23 Standard Test Method for  Semi-Quantitative Field Test Method for Base Number in New   and Used Lubricants by Color-Indicator Titration"
2023,ASTM,"D5984-23 Standard Test Method for  Semi-Quantitative Field Test Method for Base Number in New   and Used Lubricants by Color-Indicator Titration (Redline)"
2023,ASTM,"D6082-23 Standard Test Method for  High Temperature Foaming Characteristics of Lubricating Oils"
2023,ASTM,"D6082-23 Standard Test Method for  High Temperature Foaming Characteristics of Lubricating Oils (Redline)"
2023,ASTM,"D6354-23 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used  in Aluminum Production"
2023,ASTM,"D6354-23 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used  in Aluminum Production (Redline)"
2023,ASTM,"D6227-18(2023) Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2023,ASTM,"D6353-23 Standard Guide for  Sampling Plan and Core Sampling for Prebaked Anodes Used in   Aluminum Production"
2023,ASTM,"D6353-23 Standard Guide for  Sampling Plan and Core Sampling for Prebaked Anodes Used in   Aluminum Production (Redline)"
2023,ASTM,"D5770-23 Standard Test Method for  Semiquantitative Micro Determination of Acid Number of Lubricating    Oils During Oxidation Testing"
2023,ASTM,"D5770-23 Standard Test Method for  Semiquantitative Micro Determination of Acid Number of Lubricating    Oils During Oxidation Testing (Redline)"
2023,ASTM,"D6006-23 Standard Guide for  Assessing Biodegradability of Hydraulic Fluids"
2023,ASTM,"D6006-23 Standard Guide for  Assessing Biodegradability of Hydraulic Fluids (Redline)"
2023,ASTM,"D6439-23 Standard Guide for  Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric   Turbine Lubrication Systems"
2023,ASTM,"D6439-23 Standard Guide for  Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric   Turbine Lubrication Systems (Redline)"
2023,ASTM,"D6300-23 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products, Liquid Fuels, and Lubricants"
2023,ASTM,"D4739-23 Standard Test Method for  Base Number Determination by Potentiometric Hydrochloric Acid   Titration"
2023,ASTM,"D4739-23 Standard Test Method for  Base Number Determination by Potentiometric Hydrochloric Acid   Titration (Redline)"
2023,ASTM,"D4952-23 Standard Test Method for  Qualitative Analysis for Active Sulfur Species in Fuels and  Solvents (Doctor Test)"
2023,ASTM,"D4952-23 Standard Test Method for  Qualitative Analysis for Active Sulfur Species in Fuels and  Solvents (Doctor Test) (Redline)"
2023,ASTM,"D4742-23 Standard Test Method for  Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film   Oxygen Uptake (TFOUT)"
2023,ASTM,"D4742-23 Standard Test Method for  Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film   Oxygen Uptake (TFOUT) (Redline)"
2023,ASTM,"D4814-23 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2023,ASTM,"D6299-23e1 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2023,ASTM,"D6299-23 Standard Practice for  Applying Statistical Quality Assurance and Control Charting   Techniques to Evaluate Analytical Measurement System Performance"
2023,ASTM,"D4178-23 Standard Practice for  Calibrating Moisture Analyzers"
2023,ASTM,"D4178-23 Standard Practice for  Calibrating Moisture Analyzers (Redline)"
2023,ASTM,"D4616-23 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch"
2023,ASTM,"D4616-23 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch (Redline)"
2023,ASTM,"D5018-23 Standard Test Method for  Shear Viscosity of Coal-Tar and Petroleum Pitches"
2023,ASTM,"D5018-23 Standard Test Method for  Shear Viscosity of Coal-Tar and Petroleum Pitches (Redline)"
2023,ASTM,"D5662-23 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers"
2023,ASTM,"D5662-23 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical  Oil Seal Elastomers (Redline)"
2023,ASTM,"D4292-23 Standard Test Method for  Determination of Vibrated Bulk Density of Calcined Petroleum   Coke"
2023,ASTM,"D4292-23 Standard Test Method for  Determination of Vibrated Bulk Density of Calcined Petroleum   Coke (Redline)"
2023,ASTM,"D5864-23 Standard Test Method for  Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components"
2023,ASTM,"D5864-23 Standard Test Method for  Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components (Redline)"
2023,ASTM,"D6224-23 Standard Practice for  In-Service Monitoring of Lubricating Oil for Auxiliary Power   Plant Equipment"
2023,ASTM,"D6224-23 Standard Practice for  In-Service Monitoring of Lubricating Oil for Auxiliary Power   Plant Equipment (Redline)"
2023,ASTM,"D4626-23 Standard Practice for  Calculation of Gas Chromatographic Response Factors"
2023,ASTM,"D4626-23 Standard Practice for  Calculation of Gas Chromatographic Response Factors (Redline)"
2023,ASTM,"D5986-23 Standard Test Method for  Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf  >–C<inf>12</inf> Aromatics and Total Aromatics in Finished  Gasoline by Gas  Chromatography/Fourier Transform Infrared Spectroscopy"
2023,ASTM,"D5986-23 Standard Test Method for  Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf  >–C<inf>12</inf> Aromatics and Total Aromatics in Finished  Gasoline by Gas  Chromatography/Fourier Transform Infrared Spectroscopy (Redline)"
2023,ASTM,"D5707-23 Standard Test Method for  Measuring Friction and Wear Properties of Lubricating Grease   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2023,ASTM,"D5707-23 Standard Test Method for  Measuring Friction and Wear Properties of Lubricating Grease   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (Redline)"
2023,ASTM,"D5236-23 Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill  Method)"
2023,ASTM,"D5236-23 Standard Test Method for  Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill  Method) (Redline)"
2023,ASTM,"D4865-23 Standard Guide for  Generation and Dissipation of Static Electricity in Petroleum Fuel Systems"
2023,ASTM,"D4865-23 Standard Guide for  Generation and Dissipation of Static Electricity in Petroleum Fuel Systems (Redline)"
2023,ASTM,"D5001-23 Standard Test Method for  Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder   Lubricity Evaluator (BOCLE)"
2023,ASTM,"D5001-23 Standard Test Method for  Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder   Lubricity Evaluator (BOCLE) (Redline)"
2023,ASTM,"D4808-23 Standard Test Methods for  Hydrogen Content of Light Distillates, Middle Distillates,   Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance   Spectroscopy"
2023,ASTM,"D4808-23 Standard Test Methods for  Hydrogen Content of Light Distillates, Middle Distillates,   Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance   Spectroscopy (Redline)"
2023,ASTM,"D4931-23 Standard Test Method for  Gross Moisture in Green Petroleum Coke"
2023,ASTM,"D4931-23 Standard Test Method for  Gross Moisture in Green Petroleum Coke (Redline)"
2023,ASTM,"D5004-23 Standard Test Method for  Real Density of Calcined Petroleum Coke by Xylene Displacement"
2023,ASTM,"D5004-23 Standard Test Method for  Real Density of Calcined Petroleum Coke by Xylene Displacement (Redline)"
2023,ASTM,"D5188-23 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated  Chamber and Piston Based Method)"
2023,ASTM,"D5188-23 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated  Chamber and Piston Based Method) (Redline)"
2023,ASTM,"D4486-23 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids"
2023,ASTM,"D4486-23 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids (Redline)"
2023,ASTM,"D6158-23 Standard Specification for  Mineral Hydraulic Oils"
2023,ASTM,"D6158-23 Standard Specification for  Mineral Hydraulic Oils (Redline)"
2023,ASTM,"D6299-23a Standard Practice for  Applying Statistical Quality Assurance and Control Charting  Techniques to Evaluate Analytical Measurement System Performance"
2023,ASTM,"D6299-23a Standard Practice for  Applying Statistical Quality Assurance and Control Charting  Techniques to Evaluate Analytical Measurement System Performance (Redline)"
2023,ASTM,"D6300-23a Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products, Liquid Fuels, and Lubricants"
2023,ASTM,"D5003/D5003M-23 Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke"
2023,ASTM,"D5003/D5003M-23 Standard Test Method for  Hardgrove Grindability Index (HGI) of Petroleum Coke (Redline)"
2023,ASTM,"D4814-23a Standard Specification for Automotive Spark-Ignition Engine Fuel"
2023,ASTM,"D4898-23 Standard Test Method for  Insoluble Contamination of Hydraulic Fluids by Gravimetric   Analysis"
2023,ASTM,"D4898-23 Standard Test Method for  Insoluble Contamination of Hydraulic Fluids by Gravimetric   Analysis (Redline)"
2023,ASTM,"D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer  Based Analyzer Systems"
2023,ASTM,"D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line,   Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer  Based Analyzer Systems (Redline)"
2023,ASTM,"D5273-23 Standard Guide for  Analysis of Propylene Concentrates"
2023,ASTM,"D5273-23 Standard Guide for  Analysis of Propylene Concentrates (Redline)"
2023,ASTM,"D5706-23 Standard Test Method for  Determining Extreme Pressure Properties of Lubricating Greases   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine"
2023,ASTM,"D5706-23 Standard Test Method for  Determining Extreme Pressure Properties of Lubricating Greases   Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (Redline)"
2023,ASTM,"D6425-23 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure  (EP) Lubricating Oils Using SRV Test Machine"
2023,ASTM,"D6425-23 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure  (EP) Lubricating Oils Using SRV Test Machine (Redline)"
2023,ASTM,"D5842-23 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement"
2023,ASTM,"D5842-23 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement (Redline)"
2024,ASTM,"D5306-24 Standard Test Method for  Linear Flame Propagation Rate of Lubricating Oils and Hydraulic  Fluids"
2024,ASTM,"D5306-24 Standard Test Method for  Linear Flame Propagation Rate of Lubricating Oils and Hydraulic  Fluids (Redline)"
2024,ASTM,"D6300-24 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products, Liquid Fuels, and Lubricants"
2024,ASTM,"D6300-24 Standard Practice for  Determination of Precision and Bias Data for Use in Test Methods   for Petroleum Products, Liquid Fuels, and Lubricants (Redline)"
2024,ASTM,"D5623-24 Standard Test Method for  Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography  and Sulfur Selective Detection"
2024,ASTM,"D5623-24 Standard Test Method for  Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography  and Sulfur Selective Detection (Redline)"
2024,ASTM,"D6227-24 Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component"
2024,ASTM,"D6227-24 Standard Specification for  Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component (Redline)"
2024,ASTM,"D4378-24 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas,  and Combined Cycle Turbines"
2024,ASTM,"D4378-24 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas,  and Combined Cycle Turbines (Redline)"
2024,ASTM,"D4296-24 Standard Practice for Sampling Pitch"
2024,ASTM,"D4296-24 Standard Practice for Sampling Pitch (Redline)"
2024,ASTM,"D4814-24 Standard Specification for Automotive Spark-Ignition Engine Fuel"
2024,ASTM,"D4814-24 Standard Specification for Automotive Spark-Ignition Engine Fuel (Redline)"
2024,ASTM,"D6371-24 Standard Test Method for  Cold Filter Plugging Point of Diesel and Heating Fuels"
2024,ASTM,"D6371-24 Standard Test Method for  Cold Filter Plugging Point of Diesel and Heating Fuels (Redline)"