2006,ASTM,"F1249-06 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor"
1995,ASTM,"F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor"
1998,ASTM,"F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials"
2003,ASTM,"F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials"
2008,ASTM,"F904-98(2008) Standard Test Method for  Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials"
2009,ASTM,"D1185-98a(2009) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping"
2003,ASTM,"D1596-97(2003) Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material"
2004,ASTM,"D1874-62(2004) Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases"
2006,ASTM,"D1975-95(2006) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails"
2007,ASTM,"D1994-07 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives"
2009,ASTM,"D2979-01(2009) Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine"
2005,ASTM,"D3060-94(2005) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products"
2008,ASTM,"D3061-97(2008) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans"
2008,ASTM,"D3064-97(2008) Terminology Relating to Aerosol Products"
2006,ASTM,"D3065-01(2006) Standard Test Methods for Flammability of Aerosol Products"
2005,ASTM,"D3069-94(2005) Standard Test Method for Delivery Rate of Aerosol Products"
2005,ASTM,"D3070-00(2005) Standard Test Method of Rapid Pressure Determination of Pressurized Products"
2005,ASTM,"D3076-00(2005) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers"
2008,ASTM,"D3089-97(2008) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes"
2008,ASTM,"D3090-72(2008) Standard Practice for Storage Testing of Aerosol Products"
2008,ASTM,"D3091-72(2008) Standard Practice for Safe Filling of Low-Pressure Pressurized Products"
2005,ASTM,"D3094-00(2005) Standard Test Method for Seepage Rate of Aerosol Products"
2006,ASTM,"D3121-06 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball"
2007,ASTM,"D3198-97(2007) Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures"
2007,ASTM,"D3469-97(2007) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures"
2007,ASTM,"D3470-97(2007) Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures"
2007,ASTM,"D3472-97(2007) Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures"
2007,ASTM,"D3474-90(2007) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications"
2009,ASTM,"D3475-09 Standard Classification of  Child-Resistant Packages"
2006,ASTM,"D3481-06 Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
2006,ASTM,"D3611-06 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes"
2006,ASTM,"D3652/D3652M-01(2006) Standard Test Method for Thickness of Pressure-Sensitive Tapes"
2006,ASTM,"D3654/D3654M-06 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes"
2004,ASTM,"D3715/D3715M-98(2004) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes"
2005,ASTM,"D3759/D3759M-05 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
2007,ASTM,"D3810-97(2007) Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures"
2006,ASTM,"D3811/D3811M-96(2006) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes"
2007,ASTM,"D3813/D3813M-98(2007) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes"
2005,ASTM,"D3815/D3815M-05 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus"
2007,ASTM,"D3816/D3816M-96(2007) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes"
2006,ASTM,"D3833/D3833M-96(2006) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes"
2006,ASTM,"D3889/D3889M-96(2006) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature"
2005,ASTM,"D3890-05 Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser"
2004,ASTM,"D3951-98(2004) Standard Practice for Commercial Packaging"
2007,ASTM,"D3953-07 Standard Specification for Strapping, Flat Steel and Seals"
2007,ASTM,"D3968-97(2007) Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures"
2005,ASTM,"D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor"
2009,ASTM,"D4003-98(2009) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems"
2002,ASTM,"D4168-95(2002) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials"
2007,ASTM,"D4267-07 Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers"
2009,ASTM,"D4279-95(2009) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods"
2006,ASTM,"D4332-01(2006) Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
2005,ASTM,"D4334-05 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser"
2006,ASTM,"D4335-99(2006) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser"
2005,ASTM,"D4336-05 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser"
2007,ASTM,"D4498-07 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives"
2007,ASTM,"D4499-07 Standard Test Method for Heat Stability of Hot-Melt Adhesives"
2005,ASTM,"D4504-94(2005) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods"
2005,ASTM,"D4577-05 Standard Test Method for Compression Resistance of a Container Under Constant Load"
2009,ASTM,"D4649-03(2009) Standard Guide for Selection and Use of Stretch Wrap Films"
2009,ASTM,"D4675-09 Standard Guide for Selection and Use of Flat Strapping Materials"
2007,ASTM,"D4727/D4727M-07 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes"
2006,ASTM,"D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers"
2006,ASTM,"D4774-06 Standard Specification for User Applied Drug Labels in Anesthesiology"
2009,ASTM,"D4775/D4775M-09 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)"
2008,ASTM,"D4919-03(2008) Standard Specification for Testing of Hazardous Materials Packagings"
2007,ASTM,"D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method"
2007,ASTM,"D5022-07 Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use"
2009,ASTM,"D5077-90(2009) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials"
2009,ASTM,"D5094/D5094M-09 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures"
2005,ASTM,"D5105-05 Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight"
2009,ASTM,"D5112-98(2009) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products"
2009,ASTM,"D5168-09 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers"
2004,ASTM,"D5264-98(2004) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester"
2009,ASTM,"D5276-98(2009) Standard Test Method for Drop Test of Loaded Containers by Free Fall"
2008,ASTM,"D5277-92(2008) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester"
2006,ASTM,"D5330/D5330M-06 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced"
2004,ASTM,"D5375/D5375M-98(2004) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock"
2007,ASTM,"D5414-95(2007) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films"
2007,ASTM,"D5415-95(2007) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing"
2007,ASTM,"D5416-95(2007) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing"
2005,ASTM,"D5445-05 Standard Practice for Pictorial Markings for Handling of Goods"
2007,ASTM,"D5458-95(2007) Standard Test Method for Peel Cling of Stretch Wrap Film"
2007,ASTM,"D5459-95(2007) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film"
2006,ASTM,"D5486/D5486M-06 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing"
2008,ASTM,"D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines"
2009,ASTM,"D5639/D5639M-09 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements"
2003,ASTM,"D5663-97(2003) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard"
2006,ASTM,"D5728-00(2006) Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport"
2007,ASTM,"D5748-95(2007) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2006,ASTM,"D5749-01(2006) Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
2006,ASTM,"D5750/D5750M-95(2006) Standard Guide for Width and Length of Pressure-Sensitive Tape"
2008,ASTM,"D6039/D6039M-08 Standard Specification for  Open and Covered Wood Crates"
2007,ASTM,"D6123/D6123M-97(2007) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking"
2007,ASTM,"D6179-07 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates"
2007,ASTM,"D6198-07 Standard Guide for Transport Packaging Design"
2007,ASTM,"D6199-07 Standard Practice for Quality of Wood Members of Containers and Pallets"
2004,ASTM,"D6252/D6252M-98(2004) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle"
2007,ASTM,"D6254/D6254M-07 Standard Specification for Wirebound Pallet-Type Wood Boxes"
2005,ASTM,"D6255/D6255M-05 Standard Specification for Steel or Aluminum Slotted Angle Crates"
2005,ASTM,"D6256/D6256M-99(2005) Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases"
2004,ASTM,"D6295/D6295M-98(2004) Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape"
2009,ASTM,"D6344-04(2009) Standard Test Method for Concentrated Impacts to Transport Packages"
2008,ASTM,"D6398-08  Standard Practice to Enhance Identification of Drug Names on Labels"
2006,ASTM,"D6463/D6463M-06 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading"
2005,ASTM,"D6534-05 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser"
2006,ASTM,"D6537-00(2006) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance"
2005,ASTM,"D6551/D6551M-05 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus"
2007,ASTM,"D6573/D6573M-01(2007) Standard Specification for General Purpose Wirebound Shipping Boxes"
2006,ASTM,"D6590/D6590M-00(2006) Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans"
2005,ASTM,"D6633-05 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser"
2005,ASTM,"D6654-05 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser"
2007,ASTM,"D6655-01(2007) Standard Terminology Relating to Mechanical Pump Dispensers"
2007,ASTM,"D6787-02(2007) Standard Specification for Repositionable Note Pad"
2007,ASTM,"D6788-02(2007) Standard Specification for Repositionable Pressure-Sensitive Flags"
2007,ASTM,"D6804-02(2007) Standard Guide for Hand Hole Design in Corrugated Boxes"
2008,ASTM,"D6834-02(2008) Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser"
2009,ASTM,"D7030-04(2009) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine"
2008,ASTM,"D880-92(2008) Standard Test Method for Impact Testing for Shipping Containers and Systems"
2008,ASTM,"D999-08  Standard Test Methods for Vibration Testing of Shipping Containers"
2007,ASTM,"E171-94(2007) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials"
2007,ASTM,"F1140-07 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages"
2002,ASTM,"F119-82(2002) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)"
2008,ASTM,"F1278-96(2008) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment"
2007,ASTM,"F1307-02(2007) Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor"
2008,ASTM,"F1308-98(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products"
2007,ASTM,"F1317-98(2007) Standard Test Method for Calibration of Microwave Ovens"
2008,ASTM,"F1349-08 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors"
2008,ASTM,"F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators"
2008,ASTM,"F1500-98(2008) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants"
2008,ASTM,"F1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products"
2008,ASTM,"F17-08 Standard Terminology Relating to Flexible Barrier Packaging"
2004,ASTM,"F1884-04 Standard Test Method for Determining Residual Solvents in Packaging Materials"
2009,ASTM,"F1886/F1886M-09 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection"
2004,ASTM,"F1921-98(2004) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs"
2007,ASTM,"F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector"
2004,ASTM,"F1929-98(2004) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration"
2007,ASTM,"F1980-07 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices"
2005,ASTM,"F2013-05 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector"
2008,ASTM,"F2029-08 Standard Practices for  Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength"
2007,ASTM,"F2054-07 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates"
2004,ASTM,"F2096-04 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)"
2008,ASTM,"F2097-08 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products"
2007,ASTM,"F2203-02(2007) Standard Test Method for Linear Measurement Using Precision Steel Rule"
2007,ASTM,"F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination"
2008,ASTM,"F2250-03(2008) Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials"
2008,ASTM,"F2251-03(2008) Standard Test Method for Thickness Measurement of Flexible Packaging Material"
2008,ASTM,"F2252-03(2008)  Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape"
2009,ASTM,"F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method"
2007,ASTM,"F34-02(2007) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials"
2008,ASTM,"F874-98(2008) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors"
2009,ASTM,"F88/F88M-09 Standard Test Method for Seal Strength of Flexible Barrier Materials"
2007,ASTM,"F99-07 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials"
2010,ASTM,"D2221-01(2010) Standard Test Method for Creep Properties of Package Cushioning Materials"
2009,ASTM,"D2658-04(2009) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)"
2010,ASTM,"D3332-99(2010) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines"
2010,ASTM,"D3580-95(2010) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products"
2009,ASTM,"D4169-09 Standard Practice for Performance Testing of Shipping Containers and Systems"
2009,ASTM,"D5265-09 Standard Test Method for Bridge Impact Testing"
2010,ASTM,"D6253-10 Standard Practice for Treatment and/or Marking of Wood Packaging Materials"
2009,ASTM,"F1608-00(2009) Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)"
2010,ASTM,"D2063/D2063M-10 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment"
2010,ASTM,"D2860/D2860M-04(2010) Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress"
2010,ASTM,"D5570/D5570M-10 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure"
2010,ASTM,"D5571-94(2010) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
2006,ASTM,"D7257-06 Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
2006,ASTM,"D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation"
2008,ASTM,"D7386-08 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems"
2008,ASTM,"D7434-08 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads"
2008,ASTM,"D7435-08 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers"
2010,ASTM,"D951-99(2010) Standard Test Method for Water Resistance of Shipping Containers by Spray Method"
2005,ASTM,"F2391-05 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas"
2005,ASTM,"F2475-05 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials"
2007,ASTM,"F2638-07 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier"
2008,ASTM,"F2714-08 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay"
2010,ASTM,"F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids"
2010,ASTM,"D1974/D1974M-10 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes"
2010,ASTM,"D3330/D3330M-04(2010) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape"
2010,ASTM,"D3950-10a Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2010,ASTM,"D996-10 Standard Terminology of Packaging and Distribution Environments"
2007,ASTM,"D1994-07 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Redline)"
2010,ASTM,"D2221-01(2010) Standard Test Method for Creep Properties of Package Cushioning Materials (Redline)"
2006,ASTM,"D3121-06 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball (Redline)"
2007,ASTM,"D4267-07 Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers (Redline)"
2007,ASTM,"D4498-07 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Redline)"
2007,ASTM,"D4499-07 Standard Test Method for Heat Stability of Hot-Melt Adhesives (Redline)"
2009,ASTM,"D4775/D4775M-09 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) (Redline)"
2007,ASTM,"D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method (Redline)"
2007,ASTM,"D5022-07 Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use (Redline)"
2009,ASTM,"D6344-04(2009) Standard Test Method for Concentrated Impacts to Transport Packages (Redline)"
2008,ASTM,"D6398-08  Standard Practice to Enhance Identification of Drug Names on Labels (Redline)"
2008,ASTM,"D999-08  Standard Test Methods for Vibration Testing of Shipping Containers (Redline)"
2008,ASTM,"F1349-08 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors (Redline)"
2001,ASTM,"F1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor"
2007,ASTM,"F17-07a Standard Terminology Relating to Flexible Barrier Packaging"
2007,ASTM,"F17-07 Standard Terminology Relating to Flexible Barrier Materials"
2006,ASTM,"F17-06 Standard Terminology Relating to Flexible Barrier Materials"
1998,ASTM,"F17-98 Standard Terminology Relating to Flexible Barrier Materials"
2002,ASTM,"F34-02 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials"
2011,ASTM,"F99-07(2011) Standard Guide for  Writing a Specification for Flexible Barrier Rollstock Materials"
2001,ASTM,"F99-76(2001) Standard Practice for Preparation of Flexible Barrier Material Specifications"
1993,ASTM,"F99-76(1993) Standard Practice for Preparation of Flexible Barrier Material Specifications"
2008,ASTM,"F119-82(2008) Standard Test Method for  Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)"
1998,ASTM,"F119-82(1998) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)"
2011,ASTM,"F392/F392M-11 Standard Test Method for Flex Durability of Flexible Barrier Materials"
2002,ASTM,"E171-94(2002) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials"
1998,ASTM,"E171-94(1998) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials"
2010,ASTM,"D642-00(2010) Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads"
2005,ASTM,"D642-00(2005)e1 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads"
2005,ASTM,"D642-00(2005) Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads"
2000,ASTM,"D642-00 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads"
2009,ASTM,"E398-03(2009)e1 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement"
2003,ASTM,"E398-03 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement"
2002,ASTM,"D880-92(2002) Standard Test Method for Impact Testing for Shipping Containers and Systems"
1997,ASTM,"D880-92(1997) Standard Test Method for Impact Testing for Shipping Containers and Systems"
2003,ASTM,"F874-98(2003) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors"
1998,ASTM,"F874-98 Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors"
2004,ASTM,"D951-99(2004) Standard Test Method for Water Resistance of Shipping Containers by Spray Method"
1999,ASTM,"D951-99 Standard Test Method for Water Resistance of Shipping Containers by Spray Method"
2010,ASTM,"D996-10a Standard Terminology of Packaging and Distribution Environments"
2004,ASTM,"D996-04 Standard Terminology of Packaging and Distribution Environments"
2002,ASTM,"D996-02 Standard Terminology of Packaging and Distribution Environments"
1999,ASTM,"D996-99 Standard Terminology of Packaging and Distribution Environments"
2007,ASTM,"D999-07 Standard Test Methods for Vibration Testing of Shipping Containers"
2001,ASTM,"D999-01 Standard Test Methods for Vibration Testing of Shipping Containers"
1996,ASTM,"D999-96 Standard Methods for Vibration Testing of Shipping Containers"
2003,ASTM,"D1185-98a(2003) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping"
1998,ASTM,"D1185-98a Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping"
2008,ASTM,"F1115-95(2008)e1 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers"
2001,ASTM,"F1115-95(2001) Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers"
1995,ASTM,"F1115-95 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers"
2005,ASTM,"F1140-00(2005) Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications"
2000,ASTM,"F1140-00 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications"
2009,ASTM,"D1434-82(2009)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting"
2003,ASTM,"D1434-82(2003) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting"
1998,ASTM,"D1434-82(1998) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting"
2011,ASTM,"F1249-06(2011) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor"
2003,ASTM,"F1278-96(2003) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment"
1996,ASTM,"F1278-96 Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment"
2008,ASTM,"F1306-90(2008)e1 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates"
2008,ASTM,"F1306-90(2008) Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates"
2002,ASTM,"F1306-90(2002) Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates"
1998,ASTM,"F1306-90(1998) Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates"
2002,ASTM,"F1307-02 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor"
2003,ASTM,"F1308-98(2003) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products"
1998,ASTM,"F1308-98 Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products"
2002,ASTM,"F1317-98(2002) Standard Test Method for Calibration of Microwave Ovens"
1998,ASTM,"F1317-98 Standard Test Method for Calibration of Microwave Ovens"
2003,ASTM,"F1349-98(2003) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors"
1998,ASTM,"F1349-98 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors"
2011,ASTM,"D1596-97(2011) Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material"
1997,ASTM,"D1596-97 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material"
2003,ASTM,"F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators"
1996,ASTM,"F1416-96 Standard Guide for Selection of Time-Temperature Indicators"
2003,ASTM,"F1500-98(2003) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants"
1998,ASTM,"F1500-98 Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants"
2003,ASTM,"F1519-98(2003) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products"
1998,ASTM,"F1519-98 Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products"
2010,ASTM,"D1874-62(2010) Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases"
1998,ASTM,"D1874-62(1998) Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases"
2004,ASTM,"F1608-00(2004) Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)"
2000,ASTM,"F1608-00 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)"
2010,ASTM,"D1975-95(2010) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails"
2001,ASTM,"D1975-95(2001)e1 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails"
1995,ASTM,"D1975-95 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails"
2000,ASTM,"D1994-95(2000) Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives"
2009,ASTM,"D2063/D2063M-09 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures"
2001,ASTM,"D2221-01 Standard Test Method for Creep Properties of Package Cushioning Materials"
1994,ASTM,"D2221-94 Standard Test Method for Creep Properties of Package Cushioning Materials"
2011,ASTM,"F1884-04(2011) Standard Test Method for Determining Residual Solvents in Packaging Materials"
1998,ASTM,"F1884-98 Standard Test Method for Determining Residual Solvents in Packaging Materials"
1998,ASTM,"F1921-98 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs"
1998,ASTM,"F1927-98e1 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector"
2004,ASTM,"F1927-98(2004) Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector"
1998,ASTM,"F1929-98 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration"
2011,ASTM,"F1980-07(2011) Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices"
2002,ASTM,"F1980-02 Standard Guide for Accelerated Aging of Sterile Medical Device Packages"
1999,ASTM,"F1980-99e1 Standard Guide for Accelerated Aging of Sterile Medical Device Packages"
2010,ASTM,"F2013-10 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector"
2010,ASTM,"F2013-10 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector (Redline)"
2001,ASTM,"F2013-01 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector"
2000,ASTM,"F2013-00 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector"
2000,ASTM,"F2029-00 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength"
2005,ASTM,"F2054-00(2005) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates"
2000,ASTM,"F2054-00 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates"
2007,ASTM,"F2095-07e1 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates"
2007,ASTM,"F2095-07 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates"
2001,ASTM,"F2095-01 Standard Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates"
2002,ASTM,"F2096-02e1 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)"
2002,ASTM,"F2096-02 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)"
2001,ASTM,"F2096-01 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)"
2010,ASTM,"F2097-10 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products"
2007,ASTM,"F2097-07 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products"
2001,ASTM,"F2097-01 Standard Guide for Design and Evaluation of Primary Packaging for Medical Products"
2004,ASTM,"D2658-04 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)"
1999,ASTM,"D2658-94(1999) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)"
2002,ASTM,"F2203-02e1 Standard Test Method for Linear Measurement Using Precision Steel Rule"
2002,ASTM,"F2203-02 Standard Test Method for Linear Measurement Using Precision Steel Rule"
2002,ASTM,"F2217-02 Standard Practice for Coating/Adhesive Weight Determination"
2003,ASTM,"F2250-03 Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials"
2003,ASTM,"F2251-03e1 Standard Test Method for Thickness Measurement of Flexible Packaging Material"
2003,ASTM,"F2251-03 Standard Test Method for Thickness Measurement of Flexible Packaging Material"
2003,ASTM,"F2252-03 Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape"
2004,ASTM,"D2860/D2860M-04 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress"
1999,ASTM,"D2860/D2860M-90(1999) Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress"
2007,ASTM,"F2338-07 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method"
2005,ASTM,"F2338-05 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method"
2004,ASTM,"F2338-04 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method"
2003,ASTM,"F2338-03 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method"
2011,ASTM,"F2391-05(2011) Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas"
2001,ASTM,"D2979-01 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine"
2000,ASTM,"D2979-00 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine"
2011,ASTM,"F2475-11 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials"
2010,ASTM,"F2559/F2559M-06(2010)e1 Standard Guide for Writing a Specification for Sterilizable Peel Pouches"
1999,ASTM,"D3060-94(1999)e1 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products"
2003,ASTM,"D3061-97(2003) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans"
2003,ASTM,"D3064-97(2003) Terminology Relating to Aerosol Products"
1997,ASTM,"D3064-97 Terminology Relating to Aerosol Products"
2001,ASTM,"D3065-01 Standard Test Methods for Flammability of Aerosol Products"
1994,ASTM,"D3065-94 Standard Test Methods for Flammability of Aerosol Products"
2008,ASTM,"F2622-08e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors"
2008,ASTM,"F2622-08 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors"
1999,ASTM,"D3069-94(1999)e1 Standard Test Method for Delivery Rate of Aerosol Products"
2010,ASTM,"D3070-00(2010) Standard Test Method of Rapid Pressure Determination of Pressurized Products"
2000,ASTM,"D3070-00 Standard Test Method of Rapid Pressure Determination of Pressurized Products"
2010,ASTM,"D3076-00(2010) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers"
2000,ASTM,"D3076-00 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers"
2008,ASTM,"D3078-02(2008)e1 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission"
2008,ASTM,"D3078-02(2008) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission"
2002,ASTM,"D3078-02 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission"
1994,ASTM,"D3078-94 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission"
2009,ASTM,"D3079-94(2009)e1 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products"
2003,ASTM,"D3079-94(2003) Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products"
1999,ASTM,"D3079-94(1999) Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products"
2003,ASTM,"D3089-97(2003) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes"
1997,ASTM,"D3089-97 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes"
2003,ASTM,"D3090-72(2003) Standard Practice for Storage Testing of Aerosol Products"
1997,ASTM,"D3090-72(1997)e1 Standard Practice for Storage Testing of Aerosol Products"
2003,ASTM,"D3091-72(2003) Standard Practice for Safe Filling of Low-Pressure Pressurized Products"
1997,ASTM,"D3091-72(1997)e1 Standard Practice for Safe Filling of Low-Pressure Pressurized Products"
2010,ASTM,"D3094-00(2010) Standard Test Method for Seepage Rate of Aerosol Products"
2000,ASTM,"D3094-00 Standard Test Method for Seepage Rate of Aerosol Products"
2007,ASTM,"D3103-07e1 Standard Test Method for Thermal Insulation Performance of Distribution Packages"
2007,ASTM,"D3103-07 Standard Test Method for Thermal Insulation Performance of Distribution Packages"
1999,ASTM,"D3103-99 Standard Test Method for Thermal Insulation Quality of Packages"
2010,ASTM,"D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method"
2004,ASTM,"D3111-99(2004)e1 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method"
1999,ASTM,"D3111-99 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method"
2005,ASTM,"D3121-05 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball"
1999,ASTM,"D3121-94(1999) Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball"
2010,ASTM,"F2824-10e1 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids"
2010,ASTM,"F2825-10e1 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery"
2010,ASTM,"F2825-10 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery"
2002,ASTM,"D3198-97(2002) Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures"
2007,ASTM,"F2227-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO<sub>2</sub> Tracer Gas Method"
1997,ASTM,"D3198-97 Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures"
2002,ASTM,"F2227-02 Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO<sub>2 </sub> Tracer Gas Method"
2007,ASTM,"F2228-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO<sub>2</sub> Tracer Gas Method"
2002,ASTM,"F2228-02 Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO<sub>2</sub> Tracer Gas Method"
2005,ASTM,"F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co<sub> 2</sub>TR) Through Barrier Materials Using An Infrared Detecto"
2004,ASTM,"D3330/D3330M-04 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape"
2002,ASTM,"D3330/D3330M-02e1 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape"
2002,ASTM,"D3330/D3330M-02 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape"
2000,ASTM,"D3330/D3330M-00 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape"
2004,ASTM,"D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines"
1999,ASTM,"D3332-99 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines"
2002,ASTM,"D3469-97(2002) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures"
1997,ASTM,"D3469-97 Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures"
2002,ASTM,"D3470-97(2002) Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures"
1997,ASTM,"D3470-97 Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures"
2002,ASTM,"D3472-97(2002) Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures"
1997,ASTM,"D3472-97 Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures"
2002,ASTM,"D3474-90(2002) Standard Practice for The Calibration and Use of Torque Meters Used in Packaging Applications"
1997,ASTM,"D3474-90(1997) Standard Practice for The Calibration and Use of Torque Meters Used in Packaging Applications"
2011,ASTM,"D3475-11 Standard Classification of  Child-Resistant Packages"
2008,ASTM,"D3475-08 Standard Classification of  Child-Resistant Packages"
2007,ASTM,"D3475-07 Standard Classification of Child-Resistant Packages"
2006,ASTM,"D3475-06 Standard Classification of Child-Resistant Packages"
2005,ASTM,"D3475-05 Standard Classification of Child-Resistant Packages"
2003,ASTM,"D3475-03a Standard Classification of Child-Resistant Packages"
2003,ASTM,"D3475-03 Standard Classification of Child-Resistant Packages"
2000,ASTM,"D3475-00e1 Standard Classification of Child-Resistant Packages"
2000,ASTM,"D3475-00 Standard Classification of Child-Resistant Packages"
2011,ASTM,"D3481-06(2011) Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
2002,ASTM,"D3481-97(2002) Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
1997,ASTM,"D3481-97 Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
2004,ASTM,"D3580-95(2004) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products"
1999,ASTM,"D3580-95(1999) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products"
2011,ASTM,"D3611-06(2011) Standard Practice for  Accelerated Aging of Pressure-Sensitive Tapes"
2003,ASTM,"D3611-89(2003) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes"
1998,ASTM,"D3611-89(1998) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes"
2001,ASTM,"D3652/D3652M-01 Standard Test Method for Thickness of Pressure-Sensitive Tapes"
1999,ASTM,"D3652/D3652M-93(1999) Standard Test Method for Thickness of Pressure-Sensitive Tapes"
2011,ASTM,"D3654/D3654M-06(2011) Standard Test Methods for  Shear Adhesion of Pressure-Sensitive Tapes"
2002,ASTM,"D3654/D3654M-02 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes"
2000,ASTM,"D3654/D3654M-00e1 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes"
2011,ASTM,"D3715/D3715M-98(2011) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes"
1998,ASTM,"D3715/D3715M-98 Standard Practice for Quality Assurance of Pressure-Sensitive Tapes"
2011,ASTM,"D3759/D3759M-05(2011) Standard Test Method for  Breaking Strength and Elongation of Pressure-Sensitive Tape"
2004,ASTM,"D3759/D3759M-04 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
1996,ASTM,"D3759/D3759M-96e1 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
2002,ASTM,"D3810-97(2002) Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures"
1997,ASTM,"D3810-97 Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures"
2011,ASTM,"D3811/D3811M-96(2011) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes"
1996,ASTM,"D3811/D3811M-96e1 Standard Test Method for Unwind Force of Pressure-Sensitive Tapes"
2001,ASTM,"D3811/D3811M-96(2001) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes"
2003,ASTM,"D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes"
1998,ASTM,"D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes"
2011,ASTM,"D3815/D3815M-05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus"
1999,ASTM,"D3815/D3815M-99 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus"
1996,ASTM,"D3816/D3816M-96e1 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes"
2003,ASTM,"D3816/D3816M-96(2003) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes"
2001,ASTM,"D3816/D3816M-96(2001) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes"
2011,ASTM,"D3833/D3833M-96(2011) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes"
1996,ASTM,"D3833/D3833M-96e1 Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes"
2001,ASTM,"D3833/D3833M-96(2001) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes"
1996,ASTM,"D3889/D3889M-96e1 Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature"
2001,ASTM,"D3889/D3889M-96(2001) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature"
2010,ASTM,"D3890-05(2010) Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser"
2001,ASTM,"D3890-01 Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser"
2011,ASTM,"D3950-11 Standard Specification for  Strapping, Nonmetallic (and Joining Methods)"
2010,ASTM,"D3950-10b Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2010,ASTM,"D3950-10 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2009,ASTM,"D3950-09a Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2009,ASTM,"D3950-09 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2007,ASTM,"D3950-07 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2006,ASTM,"D3950-06e1 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2006,ASTM,"D3950-06 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2005,ASTM,"D3950-05 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2004,ASTM,"D3950-04 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2001,ASTM,"D3950-01 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2000,ASTM,"D3950-00 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2010,ASTM,"D3951-10 Standard Practice for Commercial Packaging"
1998,ASTM,"D3951-98 Standard Practice for Commercial Packaging"
2007,ASTM,"D3953-07a Standard Specification for Strapping, Flat Steel and Seals"
2006,ASTM,"D3953-06 Standard Specification for Strapping, Flat Steel and Seal"
2005,ASTM,"D3953-05 Standard Specification for Strapping, Flat Steel and Seals"
2002,ASTM,"D3953-02 Standard Specification for Strapping, Flat Steel and Seals"
1997,ASTM,"D3953-97 Standard Specification for Strapping, Flat Steel and Seals"
2002,ASTM,"D3968-97(2002) Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures"
1997,ASTM,"D3968-97 Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures"
2010,ASTM,"D3985-05(2010)e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor"
2002,ASTM,"D3985-02e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor"
2002,ASTM,"D3985-02 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor"
1995,ASTM,"D3985-95 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor"
2003,ASTM,"D4003-98(2003) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems"
1998,ASTM,"D4003-98 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems"
2010,ASTM,"D4041/D4041M-05(2010)e1 Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers"
2008,ASTM,"D4168-95(2008)e1 Standard Test Methods for  Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials"
1995,ASTM,"D4168-95 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials"
2008,ASTM,"D4169-08 Standard Practice for Performance Testing of Shipping Containers and Systems"
2005,ASTM,"D4169-05 Standard Practice for Performance Testing of Shipping Containers and Systems"
2004,ASTM,"D4169-04a Standard Practice for Performance Testing of Shipping Containers and Systems"
2004,ASTM,"D4169-04 Standard Practice for Performance Testing of Shipping Containers and Systems"
2001,ASTM,"D4169-01e1 Standard Practice for Performance Testing of Shipping Containers and Systems"
2001,ASTM,"D4169-01 Standard Practice for Performance Testing of Shipping Containers and Systems"
1999,ASTM,"D4169-99e1 Standard Practice for Performance Testing of Shipping Containers and Systems"
2001,ASTM,"D4267-95(2001) Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers"
1995,ASTM,"D4267-95 Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers"
2003,ASTM,"D4279-95(2003) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods"
1995,ASTM,"D4279-95 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods"
2001,ASTM,"D4332-01e2 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
2001,ASTM,"D4332-01e1 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
2001,ASTM,"D4332-01 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
2000,ASTM,"D4332-00 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
1999,ASTM,"D4332-99 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing"
2010,ASTM,"D4333/D4333M-05(2010)e1 Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components"
2010,ASTM,"D4334-05(2010) Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser"
1999,ASTM,"D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser"
2010,ASTM,"D4335-99(2010) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser"
1999,ASTM,"D4335-99 Standard Test Method for the Determination of the Component Retention of a Mechanical Pump Dispenser"
2010,ASTM,"D4336-05(2010) Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser"
2001,ASTM,"D4336-01 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser"
2010,ASTM,"D4497-10 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)"
2004,ASTM,"D4497-94(2004)e1 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)"
2004,ASTM,"D4497-94(2004) Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)"
1999,ASTM,"D4497-94(1999) Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)"
2000,ASTM,"D4498-00 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives"
2000,ASTM,"D4499-95(2000) Standard Test Method for Heat Stability of Hot-Melt Adhesives"
2011,ASTM,"D4504-94(2011) Standard Specification for  Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods"
2000,ASTM,"D4504-94(2000)e1 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods"
2010,ASTM,"D4577-05(2010) Standard Test Method for Compression Resistance of a Container Under Constant Load"
2003,ASTM,"D4577-00(2003)e1 Standard Test Method for Compression Resistance of a Container Under Constant Load"
2003,ASTM,"D4577-00(2003) Standard Test Method for Compression Resistance of a Container Under Constant Load"
2000,ASTM,"D4577-00 Standard Test Method for Compression Resistance of a Container Under Constant Load"
2003,ASTM,"D4649-03 Standard Guide for Selection and Use of Stretch Wrap Films"
2000,ASTM,"D4649-00 Standard Guide for Selection and Use of Stretch Wrap Films"
2009,ASTM,"D4675-09e1 Standard Guide for Selection and Use of Flat Strapping Materials"
2006,ASTM,"D4675-06e2 Standard Guide for Selection and Use of Flat Strapping Materials"
2006,ASTM,"D4675-06e1 Standard Guide for Selection and Use of Flat Strapping Materials"
2006,ASTM,"D4675-06 Standard Guide for Selection and Use of Flat Strapping Materials"
2003,ASTM,"D4675-03 Standard Guide for Selection and Use of Flat Strapping Materials"
2000,ASTM,"D4675-00 Standard Guide for Selection and Use of Flat Strapping Materials"
2005,ASTM,"D4727/D4727M-05 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes"
2003,ASTM,"D4727/D4727M-03 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes"
1998,ASTM,"D4727/D4727M-98 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes"
2001,ASTM,"D4728-01 Standard Test Method for Random Vibration Testing of Shipping Containers"
1995,ASTM,"D4728-95 Standard Test Method for Random Vibration Testing of Shipping Containers"
2011,ASTM,"D4774-11 Standard Specification for User Applied Drug Labels in Anesthesiology"
2000,ASTM,"D4774-94(2000) Standard Specification for User Applied Drug Labels in Anesthesiology"
1994,ASTM,"D4774-94 Standard Specification for User Applied Drug Labels in Anesthesiology"
2003,ASTM,"D4919-03 Standard Specification for Testing of Hazardous Materials Packagings"
1997,ASTM,"D4919-89(1997) Standard Specification for Testing of Hazardous Materials Packagings"
1999,ASTM,"D4991-94(1999) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method"
2001,ASTM,"D5022-95(2001) Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use"
1995,ASTM,"D5022-95 Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use"
2003,ASTM,"D5077-90(2003) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials"
1997,ASTM,"D5077-90(1997) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials"
2011,ASTM,"D5105-05(2011) Standard Practice for  Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight"
1999,ASTM,"D5105-94(1999) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight"
2003,ASTM,"D5112-98(2003) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products"
1998,ASTM,"D5112-98 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products"
2005,ASTM,"D5118/D5118M-05ae1 Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2005,ASTM,"D5118/D5118M-05a Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2005,ASTM,"D5118/D5118M-05 Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2004,ASTM,"D5118/D5118M-04e1 Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2004,ASTM,"D5118/D5118M-04 Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2001,ASTM,"D5118/D5118M-95(2001) Standard Practice for Fabrication of Fiberboard Shipping Boxes"
1995,ASTM,"D5118/D5118M-95 Standard Practice for Fabrication of Fiberboard Shipping Boxes"
2003,ASTM,"D5168-03 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers"
2011,ASTM,"D5264-98(2011) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester"
1998,ASTM,"D5264-98 Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester"
2009,ASTM,"D5265-03(2009) Standard Test Method for Bridge Impact Testing"
2003,ASTM,"D5265-03 Standard Test Method for Bridge Impact Testing"
1998,ASTM,"D5265-92(1998)e1 Standard Test Method for Bridge Impact Testing"
2004,ASTM,"D5276-98(2004) Standard Test Method for Drop Test of Loaded Containers by Free Fall"
1998,ASTM,"D5276-98 Standard Test Method for Drop Test of Loaded Containers by Free Fall"
2002,ASTM,"D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester"
1997,ASTM,"D5277-92(1997) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester"
2004,ASTM,"D5330/D5330M-04 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced"
2001,ASTM,"D5330/D5330M-01e1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced"
2001,ASTM,"D5330/D5330M-01 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced"
1993,ASTM,"D5330/D5330M-93e1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced"
2009,ASTM,"D5331-03(2009)e1 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films"
2003,ASTM,"D5331-03 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films"
2011,ASTM,"D5375/D5375M-98(2011) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock"
1998,ASTM,"D5375/D5375M-98 Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock"
2001,ASTM,"D5414-95(2001) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films"
1995,ASTM,"D5414-95 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films"
2001,ASTM,"D5415-95(2001) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing"
1995,ASTM,"D5415-95 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing"
2001,ASTM,"D5416-95(2001) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing"
1995,ASTM,"D5416-95 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing"
2011,ASTM,"D5445-11 Standard Practice for Pictorial Markings for Handling of Goods"
2003,ASTM,"D5445-03a Standard Practice for Pictorial Markings for Handling of Goods"
2003,ASTM,"D5445-03 Standard Practice for Pictorial Markings for Handling of Goods"
2002,ASTM,"D5445-02 Standard Practice for Pictorial Markings for Handling of Goods"
2001,ASTM,"D5445-01 Standard Practice for Pictorial Markings for Handling of Goods"
2001,ASTM,"D5458-95(2001) Standard Test Method for Peel Cling of Stretch Wrap Film"
1995,ASTM,"D5458-95 Standard Test Method for Peel Cling of Stretch Wrap Film"
2001,ASTM,"D5459-95(2001) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film"
1995,ASTM,"D5459-95 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film"
2004,ASTM,"D5486/D5486M-04 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing"
2002,ASTM,"D5487-98(2002) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines"
2005,ASTM,"D5571-94(2005) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
2001,ASTM,"D5571-94(2001)e1 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
1999,ASTM,"D5571-94(1999) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
2011,ASTM,"D5639/D5639M-11 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements"
2005,ASTM,"D5639/D5639M-05 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements"
2000,ASTM,"D5639/D5639M-95(2000)e1 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements"
1997,ASTM,"D5663-97 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard"
2000,ASTM,"D5728-00 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport"
2001,ASTM,"D5748-95(2001) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
1995,ASTM,"D5748-95 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2001,ASTM,"D5749-01 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
1995,ASTM,"D5749-95e1 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
2001,ASTM,"D5749-95(2001) Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
2001,ASTM,"D5750/D5750M-95(2001) Standard Guide for Width and Length of Pressure-Sensitive Tape"
1995,ASTM,"D5750/D5750M-95 Standard Guide for Width and Length of Pressure-Sensitive Tape"
2002,ASTM,"D6039/D6039M-02 Standard Specification for Crates, Wood, Open and Covered"
1996,ASTM,"D6039/D6039M-96 Standard Specification for Crates, Wood, Open and Covered"
2007,ASTM,"D6055-96(2007)e1 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates"
1996,ASTM,"D6055-96 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates"
2003,ASTM,"D6123/D6123M-97(2003) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking"
1997,ASTM,"D6123/D6123M-97 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking"
2003,ASTM,"D6179-97(2003) Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates"
1997,ASTM,"D6179-97 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates"
2011,ASTM,"D6195-03(2011) Standard Test Methods for Loop Tack"
2003,ASTM,"D6195-03e1 Standard Test Methods for Loop Tack"
1997,ASTM,"D6195-97 Standard Test Methods for Loop Tack"
2001,ASTM,"D6198-01e1 Standard Guide for Transport Packaging Design"
2001,ASTM,"D6198-01 Standard Guide for Transport Packaging Design"
2000,ASTM,"D6198-00 Standard Guide for Transport Packaging Design"
1997,ASTM,"D6199-97e1 Standard Practice for Quality of Wood Members of Containers and Pallets"
2005,ASTM,"D6199-97(2005) Standard Practice for Quality of Wood Members of Containers and Pallets"
2007,ASTM,"D6251/D6251M-07e2 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
2007,ASTM,"D6251/D6251M-07e1 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
2007,ASTM,"D6251/D6251M-07 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
2000,ASTM,"D6251/D6251M-00 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
1998,ASTM,"D6252/D6252M-98 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176; Angle"
2005,ASTM,"D6253-05a Standard Practice for Treatment and/or Marking of Wood Packaging Materials"
2005,ASTM,"D6253-05 Standard Practice for Treatment and/or Marking of Wood Packaging Materials"
1998,ASTM,"D6253-98 Standard Practice for Marking of Pallets"
2005,ASTM,"D6254/D6254M-99(2005) Standard Specification for Wirebound Pallet-Type Wood Boxes"
1999,ASTM,"D6254/D6254M-99 Standard Specification for Wirebound Pallet-Type Wood Boxes"
2011,ASTM,"D6255/D6255M-05(2011) Standard Specification for Steel or Aluminum Slotted Angle Crates"
1999,ASTM,"D6255/D6255M-99 Standard Specification for Steel or Aluminum Slotted Angle Crates"
2010,ASTM,"D6256/D6256M-10 Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases"
1999,ASTM,"D6256/D6256M-99 Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases"
2011,ASTM,"D6295/D6295M-98(2011) Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape"
1998,ASTM,"D6295/D6295M-98 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape"
2004,ASTM,"D6344-04 Standard Test Method for Concentrated Impacts to Transport Packages"
2003,ASTM,"D6344-98(2003) Standard Test Method for Concentrated Impacts to Transport Packages"
1998,ASTM,"D6344-98 Standard Test Method for Concentrated Impacts to Transport Packages"
2001,ASTM,"D6398-01e1 Standard Practice to Enhance Identification of Drug Names on Labels"
2001,ASTM,"D6398-01 Standard Practice to Enhance Identification of Drug Names on Labels"
2010,ASTM,"D6534-05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser"
2000,ASTM,"D6534-00 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser"
2010,ASTM,"D6535/D6535M-05(2010)e1 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser"
2010,ASTM,"D6536/D6536M-00(2010)e1 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser"
2000,ASTM,"D6537-00 Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance"
2011,ASTM,"D6551/D6551M-05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus"
2001,ASTM,"D6573/D6573M-01 Standard Specification for General Purpose Wirebound Shipping Boxes"
2000,ASTM,"D6573/D6573M-00e1 Standard Specification for General Purpose Wirebound Shipping Boxes"
2000,ASTM,"D6573/D6573M-00 Standard Specification for General Purpose Wirebound Shipping Boxes"
2000,ASTM,"D6590/D6590M-00 Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans"
2010,ASTM,"D6633-05(2010) Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser"
2001,ASTM,"D6633-01 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser"
2010,ASTM,"D6653/D6653M-01(2010)e1 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method"
2010,ASTM,"D6654-05(2010) Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser"
2001,ASTM,"D6654-01 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser"
2001,ASTM,"D6655-01 Standard Terminology Relating to Mechanical Pump Dispensers"
2002,ASTM,"D6787-02 Standard Specification for Repositionable Note Pad"
2002,ASTM,"D6788-02 Standard Specification for Repositionable Pressure-Sensitive Flags"
2011,ASTM,"D6804-02(2011) Standard Guide for Hand Hole Design in Corrugated Boxes"
2002,ASTM,"D6804-02 Standard Guide for Hand Hole Design in Corrugated Boxes"
2002,ASTM,"D6834-02 Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser"
2011,ASTM,"D6880/D6880M-11 Standard Specification for Wood Boxes"
2008,ASTM,"D6881/D6881M-03(2008)e1 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density"
2004,ASTM,"D7030-04 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine"
2011,ASTM,"D7257-06(2011) Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions"
2011,ASTM,"D7298-06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation"
2008,ASTM,"D7478/D7478M-08e1  Standard Specification for Heavy Duty Sheathed Wood Crates"
2008,ASTM,"D7478/D7478M-08  Standard Specification for Heavy Duty Sheathed Wood Crates"
2010,ASTM,"D7660-10 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings"
2011,ASTM,"D7709-11e1 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters"
2011,ASTM,"D7709-11 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters"
2011,ASTM,"D5445-11a Standard Practice for Pictorial Markings for Handling of Goods "
2011,ASTM,"D6039/D6039M-11 Standard Specification for  Open and Covered Wood Crates"
2011,ASTM,"D7478/D7478M-11  Standard Specification for Heavy Duty Sheathed Wood Crates"
2011,ASTM,"D7478/D7478M-11  Standard Specification for Heavy Duty Sheathed Wood Crates (Redline)"
2002,ASTM,"F17-02 Standard Terminology Relating to Flexible Barrier Materials"
2001,ASTM,"F2096-01e1 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)"
2005,ASTM,"F2097-05 Standard Guide for Design and Evaluation of Primary Packaging for Medical Products"
1998,ASTM,"D5445-98a Standard Practice for Pictorial Markings for Handling of Goods"
1999,ASTM,"D5486/D5486M-99ae1 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing"
1998,ASTM,"D5487-98 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines"
2003,ASTM,"D6195-03 Standard Test Methods for Loop Tack"
2011,ASTM,"D6251/D6251M-11 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
2001,ASTM,"D6251/D6251M-01 Standard Specification for Wood-Cleated Panelboard Shipping Boxes"
2011,ASTM,"D6252/D6252M-98(2011) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176; Angle"
2007,ASTM,"D7387-07 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)"
2011,ASTM,"F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test) (Redline)"
2011,ASTM,"F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)"
2011,ASTM,"E171/E171M-11 Standard Practice for Conditioning and Testing Flexible Barrier Packaging"
2011,ASTM,"D5663-97(2011) Standard Guide for  Validating Recycled Content in Packaging Paper and Paperboard "
2011,ASTM,"D4774-11e1 Standard Specification for User Applied Drug Labels in Anesthesiology"
2012,ASTM,"D2063/D2063M-10(2012) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment "
2012,ASTM,"D3652/D3652M-01(2012) Standard Test Method for  Thickness of Pressure-Sensitive Tapes"
2012,ASTM,"D3474-90(2012) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications"
2012,ASTM,"F2638-12 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier"
2012,ASTM,"D7709-12 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters (Redline)"
2012,ASTM,"D5118/D5118M-12 Standard Practice for Fabrication of Fiberboard Shipping Boxes "
2012,ASTM,"D4728-06(2012) Standard Test Method for  Random Vibration Testing of Shipping Containers"
2012,ASTM,"D7709-12 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters"
2012,ASTM,"D3889/D3889M-96(2012) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature"
2012,ASTM,"D6788-02(2012) Standard Specification for Repositionable Pressure-Sensitive Flags"
2012,ASTM,"D5168-12 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers "
2012,ASTM,"D6590/D6590M-00(2012) Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans"
2012,ASTM,"D5414-95(2012) Standard Test Method for  Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films "
2012,ASTM,"D6463/D6463M-06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear  Loading"
2012,ASTM,"D5458-95(2012) Standard Test Method for  Peel Cling of Stretch Wrap Film "
2012,ASTM,"D5459-95(2012) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film "
2012,ASTM,"D5728-12 Standard Practices for  Securement of Cargo in Intermodal and Unimodal Surface Transport"
2012,ASTM,"D5750/D5750M-95(2012) Standard Guide for  Width and Length of Pressure-Sensitive Tape"
2012,ASTM,"D5833-12 Standard Guide for  Source Reduction Reuse, Recycling, or Disposal of Steel Cans"
2012,ASTM,"D6199-07(2012) Standard Practice for Quality of Wood Members of Containers and Pallets"
2012,ASTM,"D6123/D6123M-97(2012) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking"
2012,ASTM,"D5728-12 Standard Practices for  Securement of Cargo in Intermodal and Unimodal Surface Transport (Redline)"
2012,ASTM,"D5486/D5486M-06(2012) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing "
2012,ASTM,"D6787-02(2012) Standard Specification for Repositionable Note Pad"
2012,ASTM,"D5415-95(2012) Standard Test Method for  Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing "
2012,ASTM,"D7386-12 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems"
2012,ASTM,"D3813/D3813M-98(2012)e1 Standard Test Method for  Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes"
2012,ASTM,"D3816/D3816M-96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes "
2012,ASTM,"D4727/D4727M-12 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes"
2012,ASTM,"D5330/D5330M-06(2012) Standard Specification for  Pressure-Sensitive Tape for Packaging, Filament-Reinforced"
2012,ASTM,"D3475-12 Standard Classification of  Child-Resistant Packages"
2012,ASTM,"D5416-95(2012) Standard Test Method for  Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing "
2012,ASTM,"D5748-95(2012) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film "
2012,ASTM,"D5749-01(2012) Standard Specification for  Reinforced and Plain Gummed Tape for Sealing and Securing"
2012,ASTM,"D685-12 Standard Practice for Conditioning Paper and Paper Products for Testing"
2012,ASTM,"F1140-07(2012) Standard Test Methods for  Internal Pressurization Failure Resistance of Unrestrained   Packages"
2012,ASTM,"F1317-98(2012) Standard Test Method for  Calibration of Microwave Ovens"
2012,ASTM,"F1921-12 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs"
2012,ASTM,"F2054-07(2012) Standard Test Method for  Burst Testing of Flexible Package Seals Using Internal Air   Pressurization Within Restraining Plates"
2012,ASTM,"F2203-02(2012) Standard Test Method for  Linear Measurement Using Precision Steel Rule"
2012,ASTM,"F17-12 Standard Terminology Relating to  Flexible Barrier Packaging"
2012,ASTM,"F1921-12 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs (Redline)"
2012,ASTM,"F2217-02(2012) Standard Practice for  Coating/Adhesive Weight Determination"
2012,ASTM,"D3950-12a Standard Specification for  Strapping, Nonmetallic (and Joining Methods)"
2012,ASTM,"D6198-12 Standard Guide for  Transport Packaging Design"
2002,ASTM,"D685-93(2002) Standard Practice for Conditioning Paper and Paper Products for Testing"
1998,ASTM,"D685-93(1998) Standard Practice for Conditioning Paper and Paper Products for Testing"
2012,ASTM,"D3953-12 Standard Specification for Strapping, Flat Steel and Seals"
2012,ASTM,"D7790-12 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United  Nations (UN) Drop Testing"
2012,ASTM,"F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration"
2013,ASTM,"F34-13 Standard Practice for  Construction of Test Cell for Liquid Extraction of Flexible   Barrier Materials"
2013,ASTM,"F2217/F2217M-13 Standard Practice for Coating/Adhesive Weight Determination"
2013,ASTM,"F17-13 Standard Terminology Relating to  Flexible Barrier Packaging"
2013,ASTM,"F34-13 Standard Practice for  Construction of Test Cell for Liquid Extraction of Flexible   Barrier Materials (Redline)"
2013,ASTM,"F1140/F1140M-13 Standard Test Methods for  Internal Pressurization Failure Resistance of Unrestrained   Packages"
2013,ASTM,"F1140/F1140M-13 Standard Test Methods for  Internal Pressurization Failure Resistance of Unrestrained   Packages (Redline)"
2013,ASTM,"F2054/F2054M-13 Standard Test Method for  Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates"
2013,ASTM,"F2054/F2054M-13 Standard Test Method for  Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates (Redline)"
2013,ASTM,"F2203-13 Standard Test Method for  Linear Measurement Using Precision Steel Rule"
2013,ASTM,"F2250-13 Standard Practice for  Evaluation of Chemical Resistance of Printed Inks and Coatings   on Flexible Packaging Materials"
2013,ASTM,"F2252-13 Standard Practice for  Evaluating Ink or Coating Adhesion to Flexible Packaging Materials   Using Tape"
2013,ASTM,"D3060-94(2013) Standard Test Method for  Pressure Drop Rate of Compressed Gas-Propelled Products"
2013,ASTM,"D3061-97(2013) Standard Guide for  Three-Piece Steel and Tinplate Straight-Wall and Necked-In  Aerosol Cans"
2013,ASTM,"D3064-97(2013) Standard Terminology Relating To  Aerosol Products "
2013,ASTM,"D3065-01(2013) Standard Test Methods for  Flammability of Aerosol Products"
2013,ASTM,"D3069-94(2013) Standard Test Method for  Delivery Rate of Aerosol Products"
1991,ASTM,"D3953-91 Standard Specification for Strapping, Flat Steel and Seals"
2013,ASTM,"D4332-13 Standard Practice for  Conditioning Containers, Packages, or Packaging Components   for Testing"
2013,ASTM,"D6653/D6653M-13 Standard Test Methods for  Determining the Effects of High Altitude on Packaging Systems   by Vacuum Method"
2013,ASTM,"D6653/D6653M-13 Standard Test Methods for  Determining the Effects of High Altitude on Packaging Systems   by Vacuum Method (Redline)"
2013,ASTM,"D7387-13 Standard Test Method for  Vibration Testing of Intermediate Bulk Containers (IBCs) Used   for Shipping Liquid Hazardous Materials (Dangerous Goods)"
2013,ASTM,"D3953-13 Standard Specification for  Strapping, Flat Steel and Seals"
1998,ASTM,"F34-98 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials"
1990,ASTM,"F1307-90 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor (Withdrawn 2001)"
1997,ASTM,"D3061-97e1 Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans"
1980,ASTM,"F34-76(1980)e1 Standard Test Method for Liquid Extraction of Flexible Barrier Materials"
2013,ASTM,"F17-13a Standard Terminology Relating to  Flexible Barrier Packaging"
2007,ASTM,"F88-07a Standard Test Method for Seal Strength of Flexible Barrier Materials"
2007,ASTM,"F88-07 Standard Test Method for Seal Strength of Flexible Barrier Materials"
2006,ASTM,"F88-06 Standard Test Method for Seal Strength of Flexible Barrier Materials"
2005,ASTM,"F88-05 Standard Test Method for Seal Strength of Flexible Barrier Materials"
2000,ASTM,"F88-00 Standard Test Method for Seal Strength of Flexible Barrier Materials"
2004,ASTM,"F392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier Materials"
1999,ASTM,"F392-93(1999) Standard Test Method for Flex Durability of Flexible Barrier Materials"
1998,ASTM,"D5168-98 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers"
1998,ASTM,"D5331-98 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films"
2002,ASTM,"D6055-96(2002) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates"
1995,ASTM,"D5833-95e1 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans (Withdrawn 2004)"
2007,ASTM,"D685-93(2007) Standard Practice for Conditioning Paper and Paper Products for Testing (Withdrawn 2010)"
2004,ASTM,"D5094-04 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures"
2003,ASTM,"D1974-98(2003) Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes"
1998,ASTM,"D1974-98 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes"
2002,ASTM,"D2063-91(2002) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures"
1998,ASTM,"D2063-91(1998) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures"
2013,ASTM,"D3078-02(2013) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission"
2013,ASTM,"D3475-13 Standard Classification of  Child-Resistant Packages"
2005,ASTM,"D4041-05 Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers"
2003,ASTM,"D4041-97(2003) Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers"
1997,ASTM,"D4041-97 Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers"
2005,ASTM,"D4333-05 Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components"
1999,ASTM,"D4333-99 Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components"
2004,ASTM,"D4775-04 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)"
1999,ASTM,"D4775-94(1999) Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)"
2003,ASTM,"D5094-90(2003) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures"
1997,ASTM,"D5094-90(1997) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures"
2005,ASTM,"D5570-94(2005) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure"
1999,ASTM,"D5570-94(1999) Standard Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure"
2013,ASTM,"D6254/D6254M-13 Standard Specification for  Wirebound Pallet-Type Wood Boxes"
2005,ASTM,"D6535-05 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser"
2000,ASTM,"D6535-00 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser"
2005,ASTM,"D6536-00(2005) Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser"
2000,ASTM,"D6536-00 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser"
2000,ASTM,"D6551-00 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus"
2013,ASTM,"D6573/D6573M-13 Standard Specification for  General Purpose Wirebound Shipping Boxes"
2013,ASTM,"D6573/D6573M-13 Standard Specification for  General Purpose Wirebound Shipping Boxes (Redline)"
2006,ASTM,"D6653-01(2006) Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method"
2001,ASTM,"D6653-01 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method"
2005,ASTM,"D6880-05 Standard Specification for Wood Boxes"
2003,ASTM,"D6881-03 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density"
1994,ASTM,"F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor"
2013,ASTM,"F2251-13 Standard Test Method for  Thickness Measurement of Flexible Packaging Material"
2013,ASTM,"F1886/F1886M-09(2013) Standard Test Method for  Determining Integrity of Seals for Flexible Packaging by Visual   Inspection"
2004,ASTM,"F1886-98(2004) Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection"
1998,ASTM,"F1886-98 Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection"
2012,ASTM,"F1921/F1921M-12e1 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs"
2013,ASTM,"F2095-07(2013) Standard Test Methods for  Pressure Decay Leak Test for Flexible Packages With and Without  Restraining Plates"
2013,ASTM,"F2227-13 Standard Test Method for  Non-Destructive Detection of Leaks in Non-sealed and Empty  Packaging Trays by CO<inf>2</inf> Tracer Gas Method"
2013,ASTM,"F2227-13 Standard Test Method for  Non-Destructive Detection of Leaks in Non-sealed and Empty  Packaging Trays by CO<inf>2</inf> Tracer Gas Method (Redline)"
2013,ASTM,"F2228-13 Standard Test Method for  Non-Destructive Detection of Leaks in Packaging Which Incorporates  Porous Barrier Material by CO<inf>2</inf> Tracer Gas Method"
2013,ASTM,"F2228-13 Standard Test Method for  Non-Destructive Detection of Leaks in Packaging Which Incorporates  Porous Barrier Material by CO<inf>2</inf> Tracer Gas Method (Redline)"
2013,ASTM,"F2252/F2252M-13e1 Standard Practice for  Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape"
2013,ASTM,"F2338-09(2013) Standard Test Method for  Nondestructive Detection of Leaks in Packages by Vacuum Decay  Method"
2006,ASTM,"F2559-06 Standard Guide for Writing a Specification for Sterilizable Peel Pouches"
2013,ASTM,"F2714-08(2013) Standard Test Method for  Oxygen Headspace Analysis of Packages Using Fluorescent Decay"
1999,ASTM,"F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique"
1998,ASTM,"F1327-98 Standard Terminology Relating to Barrier Materials for Medical Packaging"
1998,ASTM,"F1479-98 Standard Terminology Relating to Microwave Food Packaging"
2002,ASTM,"D1968-02 Standard Terminology Relating to Paper and Paper Products"
2002,ASTM,"D1968-02a Standard Terminology Relating to Paper and Paper Products"
2007,ASTM,"D1968-02a(2007) Standard Terminology Relating to Paper and Paper Products"
2009,ASTM,"D7580/D7580M-09 Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads"
2013,ASTM,"F3004-13 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound"
2013,ASTM,"D7887-13 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances  for Packagings Subjected to the United Nations Performance Tests"
2013,ASTM,"E398-13 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement"
2013,ASTM,"F1249-13 Standard Test Method for  Water Vapor Transmission Rate Through Plastic Film and Sheeting   Using a Modulated Infrared Sensor"
2013,ASTM,"F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier  Materials by Dye Penetration"
2013,ASTM,"F2476-13 Standard Test Method for  the Determination of Carbon Dioxide Gas Transmission Rate   &#40;CO<inf>2</inf>TR&#41; Through Barrier Materials Using An Infrared Detector"
2014,ASTM,"D4675-14a Standard Guide for  Selection and Use of Flat Strapping Materials<sup>1</sup>"
2014,ASTM,"F1307-14 Standard Test Method for  Oxygen Transmission Rate Through Dry Packages Using a Coulometric   Sensor"
2014,ASTM,"F1927-14 Standard Test Method for  Determination of Oxygen Gas Transmission Rate, Permeability   and Permeance at Controlled Relative Humidity Through Barrier Materials   Using a Coulometric Detector"
2014,ASTM,"D4675-14a Standard Guide for  Selection and Use of Flat Strapping Materials<sup>1</sup> (Redline)"
2014,ASTM,"D4775/D4775M-09(2014) Standard Specification for  Identification and Configuration of Prefilled Syringes and  Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)"
2014,ASTM,"D5094/D5094M-09(2014) Standard Test Methods for  Gross Leakage of Liquids from Containers with Threaded or Lug-Style   Closures"
2014,ASTM,"D7434-08(2014) Standard Test Method for  Determining the Performance of Passive Radio Frequency Identification   (RFID) Transponders on Palletized or Unitized Loads"
2014,ASTM,"D7435-08(2014) Standard Test Method for  Determining the Performance of Passive Radio Frequency Identification   (RFID) Transponders on Loaded Containers"
2014,ASTM,"D7580/D7580M-09(2014) Standard Test Method for  Rotary Stretch Wrapper Method for Determining the Readability   of Passive RFID Transponders on Homogenous Palletized or Unitized   Loads"
2014,ASTM,"D7932-14 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme  Distribution Environments"
2014,ASTM,"D7860-14 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child  Resistant Packages with Continuous Thread Closures Using Automated  Torque Testing Equipment"
2014,ASTM,"D4169-14 Standard Practice for  Performance Testing of Shipping Containers and Systems"
2014,ASTM,"D3103-14 Standard Test Method for  Thermal Insulation Performance of Distribution Packages"
2014,ASTM,"D3475-14 Standard Classification of  Child-Resistant Packages"
2015,ASTM,"F3136-15 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting  using a Dynamic Accumulation Method"
2015,ASTM,"D3580-95(2015) Standard Test Methods for  Vibration (Vertical Linear Motion) Test of Products"
2015,ASTM,"D4168-95(2015) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning  Materials"
2015,ASTM,"D5077-90(2015) Standard Terminology Relating to  Electrostatic Discharge (ESD) Packaging Materials"
2015,ASTM,"D5112-98(2015) Standard Test Method for  Vibration (Horizontal Linear Motion) Test of Products"
2015,ASTM,"F2981-15 Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to  the Passage of Air"
2015,ASTM,"D642-15 Standard Test Method for  Determining Compressive Resistance of Shipping Containers,   Components, and Unit Loads"
2015,ASTM,"D5663-15 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard"
2015,ASTM,"D5663-15 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard (Redline)"
2015,ASTM,"D5277-92(2015) Standard Test Method for  Performing Programmed Horizontal Impacts Using an Inclined   Impact Tester"
2015,ASTM,"D5570/D5570M-10(2015) Standard Test Method for  Water Resistance of Tape and Adhesives Used as Box Closure"
2015,ASTM,"F2824-10(2015) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers   with Flexible Peelable Lids"
2015,ASTM,"D3475-15 Standard Classification of  Child-Resistant Packages"
2015,ASTM,"D3953-15 Standard Specification for  Strapping, Flat Steel and Seals"
2015,ASTM,"D3953-15 Standard Specification for  Strapping, Flat Steel and Seals (Redline)"
2015,ASTM,"D4991-07(2015) Standard Test Method for  Leakage Testing of Empty Rigid Containers by Vacuum Method"
2015,ASTM,"D5445-15 Standard Practice for  Pictorial Markings for Handling of Goods"
2015,ASTM,"D1434-82(2015)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film   and Sheeting"
2015,ASTM,"F119-82(2015) Standard Test Method for  Rate of Grease Penetration of Flexible Barrier Materials (Rapid  Method)"
2013,ASTM,"D2658-04(2013) Standard Test Method for  Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)"
2013,ASTM,"D6881/D6881M-03(2013) Standard Classification for  Standard Plastics Industry Bulk Box/Pallet Unit Size Classified  By Bulk Density"
2013,ASTM,"F2622-08(2013) Standard Test Method for  Oxygen Gas Transmission Rate Through Plastic Film and Sheeting   Using Various Sensors"
2014,ASTM,"D6055-96(2014) Standard Test Methods for  Mechanical Handling of Unitized Loads and Large Shipping Cases  and Crates"
2014,ASTM,"D6537-00(2014) Standard Practice for  Instrumented Package Shock Testing For Determination of Package   Performance"
2014,ASTM,"F1308-98(2014) Standard Test Method for  Quantitating Volatile Extractables in Microwave Susceptors  Used for Food Products"
2014,ASTM,"D6179-07(2014) Standard Test Methods for  Rough Handling of Unitized Loads and Large Shipping Cases and  Crates"
2014,ASTM,"D6398-08(2014) Standard Practice to  Enhance Identification of Drug Names on Labels"
2014,ASTM,"F874-98(2014) Standard Test Method for  Temperature Measurement and Profiling for Microwave Susceptors"
2014,ASTM,"F1519-98(2014) Standard Test Method for  Qualitative Analysis of Volatile Extractables in Microwave   Susceptors Used to Heat Food Products"
2014,ASTM,"F1349-08(2014) Standard Test Method for  Nonvolatile Ultraviolet &#40;UV&#41; Absorbing Extractables from Microwave  Susceptors"
2014,ASTM,"F1416-96(2014) Standard Guide for  Selection of Time-Temperature Indicators"
2014,ASTM,"F1500-98(2014) Standard Test Method for  Quantitating Non-UV-Absorbing Nonvolatile Extractables from  Microwave Susceptors Utilizing Solvents as Food Simulants"
2012,ASTM,"D6787/D6787M-02(2012)e1 Standard Specification for Repositionable Note Pad"
2013,ASTM,"F3004-13e1 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound"
2014,ASTM,"D4675-14 Standard Guide for  Selection and Use of Flat Strapping Materials"
2015,ASTM,"D880-92(2015) Standard Test Method for Impact Testing for Shipping Containers and Systems"
2015,ASTM,"D999-08(2015) Standard Test Methods for  Vibration Testing of Shipping Containers"
2015,ASTM,"D4003-98(2015) Standard Test Methods for  Programmable Horizontal Impact Test for Shipping Containers   and Systems"
2015,ASTM,"D4267-07(2015) Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers"
2015,ASTM,"D5639/D5639M-11(2015) Standard Practice for  Selection of Corrugated Fiberboard Materials and Box Construction   Based on Performance Requirements"
2015,ASTM,"D6804-02(2015) Standard Guide for  Hand Hole Design in Corrugated Boxes"
2015,ASTM,"E171/E171M-11(2015) Standard Practice for  Conditioning and Testing Flexible Barrier Packaging"
2015,ASTM,"F99-07(2015) Standard Guide for  Writing a Specification for Flexible Barrier Rollstock Materials"
2015,ASTM,"F392/F392M-11(2015) Standard Practice for  Conditioning Flexible Barrier Materials for Flex  Durability"
2015,ASTM,"F1278-96(2015) Standard Guide for  Use and Handling of Flexible Retort Food Pouches in the Processing  Environment"
2015,ASTM,"F2559/F2559M-06(2015) Standard Guide for  Writing a Specification for Sterilizable Peel Pouches"
2015,ASTM,"F2825-10(2015) Standard Practice for  Climatic Stressing of Packaging Systems for Single Parcel Delivery"
2015,ASTM,"D1994-07(2015) Standard Test Method for  Determination of Acid Numbers of Hot-Melt Adhesives"
2015,ASTM,"D4498-07(2015) Standard Test Method for  Heat-Fail Temperature in Shear of Hot Melt Adhesives"
2015,ASTM,"D4499-07(2015) Standard Test Method for  Heat Stability of Hot-Melt Adhesives"
2015,ASTM,"D4727/D4727M-15 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade)   and Cut Shapes"
2015,ASTM,"D1968-15 Standard Terminology Relating to Paper and Paper Products"
2015,ASTM,"F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration"
2015,ASTM,"D5118/D5118M-15 Standard Practice for  Fabrication of Fiberboard Shipping Boxes"
2015,ASTM,"F88/F88M-15 Standard Test Method for  Seal Strength of Flexible Barrier Materials"
2015,ASTM,"F3039-15 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier  Materials by Dye Penetration"
2015,ASTM,"D3951-15 Standard Practice for  Commercial Packaging"
2012,ASTM,"D5330/D5330M-06(2012)e1 Standard Specification for  Pressure-Sensitive Tape for Packaging, Filament-Reinforced"
2014,ASTM,"F2097-14 Standard Guide for  Design and Evaluation of Primary Flexible Packaging for Medical  Products"
2015,ASTM,"D4727/D4727M-15e1 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade)   and Cut Shapes"
2016,ASTM,"F1306-16 Standard Test Method for  Slow Rate Penetration Resistance of Flexible Barrier Films  and Laminates"
2016,ASTM,"D3332-99(2016) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines"
2016,ASTM,"F2391-05(2016) Standard Test Method for  Measuring Package and Seal Integrity Using Helium as the Tracer   Gas"
2016,ASTM,"D3950-16 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2016,ASTM,"D3475-16 Standard Classification of  Child-Resistant Packages"
2016,ASTM,"D6253-16 Standard Practice for  Treatment and/or Marking of Wood Packaging Materials"
2016,ASTM,"D7386-16 Standard Practice for  Performance Testing of Packages for Single Parcel Delivery   Systems"
2016,ASTM,"D7386-16 Standard Practice for  Performance Testing of Packages for Single Parcel Delivery   Systems (Redline)"
2016,ASTM,"F904-16 Standard Test Method for  Comparison of Bond Strength or Ply Adhesion of Similar Laminates   Made from Flexible Materials"
2016,ASTM,"D1874-16 Standard Specification for  Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine  Sealing of Top Flaps of Fiberboard Shipping Cases"
2016,ASTM,"D1874-16 Standard Specification for  Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine  Sealing of Top Flaps of Fiberboard Shipping Cases (Redline)"
2016,ASTM,"D4169-16 Standard Practice for Performance Testing of Shipping Containers and Systems"
2016,ASTM,"F2013-10(2016) Standard Test Method for  Determination of Residual Acetaldehyde in Polyethylene Terephthalate   Bottle Polymer Using an Automated Static Head-Space Sampling Device   and a Capillary GC with a Flame Ionization Detector"
2016,ASTM,"F1608-16 Standard Test Method for  Microbial Ranking of Porous Packaging Materials (Exposure Chamber   Method)"
2016,ASTM,"F2097-16 Standard Guide for  Design and Evaluation of Primary Flexible Packaging for Medical  Products"
2016,ASTM,"D5265-09(2016) Standard Test Method for  Bridge Impact Testing"
2016,ASTM,"D1975-16 Standard Test Method for  Environmental Stress Crack Resistance of Plastic Injection   Molded Open Head Pails"
2016,ASTM,"D5571-16 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead   Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
2016,ASTM,"D6701-16 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven  and Plastic Barriers"
2016,ASTM,"F1980-16 Standard Guide for  Accelerated Aging of Sterile Barrier Systems for Medical Devices"
2016,ASTM,"F1115-16 Standard Test Method for  Determining the Carbon Dioxide Loss of Beverage Containers"
2016,ASTM,"F1115-16 Standard Test Method for  Determining the Carbon Dioxide Loss of Beverage Containers (Redline)"
2016,ASTM,"F1886/F1886M-16 Standard Test Method for  Determining Integrity of Seals for Flexible Packaging by Visual   Inspection"
2016,ASTM,"F1886/F1886M-16 Standard Test Method for  Determining Integrity of Seals for Flexible Packaging by Visual   Inspection (Redline)"
2012,ASTM,"F2638-12e1 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous  Packaging Materials as a Surrogate Microbial Barrier"
2016,ASTM,"D1974/D1974M-16 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes"
2016,ASTM,"D2979-16 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe  Machine"
2016,ASTM,"D2979-16 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe  Machine (Redline)"
2016,ASTM,"D996-16 Standard Terminology of  Packaging and Distribution Environments"
2016,ASTM,"D5487-16 Standard Test Method for  Simulated Drop of Loaded Containers by Shock Machines"
2016,ASTM,"D5487-16 Standard Test Method for  Simulated Drop of Loaded Containers by Shock Machines (Redline)"
2016,ASTM,"F2029-16 Standard Practices for  Making Laboratory Heat Seals for Determination of Heat Sealability  of Flexible  Barrier Materials as Measured by Seal Strength"
2016,ASTM,"F2029-16 Standard Practices for  Making Laboratory Heat Seals for Determination of Heat Sealability  of Flexible  Barrier Materials as Measured by Seal Strength (Redline)"
2016,ASTM,"D4649-03(2016) Standard Guide for  Selection and Use of Stretch Wrap Films"
2016,ASTM,"D5331-03(2016) Standard Test Method for  Evaluation of Mechanical Handling of Unitized Loads Secured  with Stretch Wrap Films"
2016,ASTM,"D3090-72(2016) Standard Practice for  Storage Testing of Aerosol Products"
2016,ASTM,"D3091-72(2016) Standard Practice for  Safe Filling of Low-Pressure Pressurized Products"
2016,ASTM,"F3169-16 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method  by Laser Measurement"
2016,ASTM,"D6256/D6256M-16 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases"
2016,ASTM,"D6256/D6256M-16 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases (Redline)"
2017,ASTM,"D3089-97(2017) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes"
2017,ASTM,"D3475-17 Standard Classification of  Child-Resistant Packages"
2017,ASTM,"D685-17 Standard Practice for  Conditioning Paper and Paper Products for Testing"
2017,ASTM,"D5168-12(2017) Standard Practice for  Fabrication and Closure of Triple-Wall Corrugated Fiberboard  Containers"
2017,ASTM,"D5749-17 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
2017,ASTM,"D4727/D4727M-17 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade)   and Cut Shapes"
2017,ASTM,"D1185-98a(2017) Standard Test Methods for  Pallets and Related Structures Employed in Materials Handling  and Shipping"
2017,ASTM,"D4279-95(2017) Standard Test Methods for  Water Vapor Transmission of Shipping Containers&#x2014;Constant  and Cycle Methods"
2017,ASTM,"D6344-04(2017) Standard Test Method for  Concentrated Impacts to Transport Packages"
2017,ASTM,"D7030-04(2017) Standard Test Method for  Short Term Creep Performance of Corrugated Fiberboard Containers   Under  Constant Load Using a Compression Test Machine"
2017,ASTM,"D3121-17 Standard Test Method for  Tack of Pressure-Sensitive Adhesives by Rolling Ball"
2017,ASTM,"D2860/D2860M-17 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&#xb0;   Angle and Constant Stress"
2017,ASTM,"D4919-17 Standard Guide for  Testing of Hazardous Materials (Dangerous Goods) Packagings"
2017,ASTM,"F17-17 Standard Terminology Relating to  Primary Barrier Packaging"
2017,ASTM,"D5276-98(2017) Standard Test Method for  Drop Test of Loaded Containers by Free Fall"
2017,ASTM,"D6787/D6787M-02(2017) Standard Specification for  Repositionable Note Pad"
2017,ASTM,"D6788-02(2017) Standard Specification for  Repositionable Pressure-Sensitive Flags"
2017,ASTM,"D7478/D7478M-11(2017) Standard Specification for Heavy Duty Sheathed Wood Crates"
2017,ASTM,"D4728-17 Standard Test Method for Random Vibration Testing of Shipping Containers"
2017,ASTM,"D4728-17 Standard Test Method for Random Vibration Testing of Shipping Containers (Redline)"
2017,ASTM,"D7932-17 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme  Distribution Environments"
2017,ASTM,"D7932-17 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme  Distribution Environments (Redline)"
2017,ASTM,"D951-17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method"
2017,ASTM,"D951-17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method (Redline)"
2017,ASTM,"D8135-17 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling  Substances for Packagings Subjected to the United Nations Performance  Tests"
2017,ASTM,"D3950-17 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2017,ASTM,"D4041/D4041M-05(2017) Standard Practice for  Determining Spray Patterns of Mechanical Pump Dispensers"
2017,ASTM,"F3287-17 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction  Method"
2017,ASTM,"D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting   Using a Coulometric Sensor"
2017,ASTM,"D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting   Using a Coulometric Sensor (Redline)"
2017,ASTM,"F3287-17e1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction  Method"
2018,ASTM,"D8134-18 Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations  (UN) IBC Design Types"
2018,ASTM,"D8196-18 Standard Practice for Determination of Water Activity (<emph type=""ital"">a<inf>w</inf  ></emph>) in Cannabis Flower"
2018,ASTM,"D8197-18 Standard Specification for Maintaining Acceptable Water Activity (<emph type=""ital"">a<inf  >w</inf></emph>) Range (0.55 to 0.65) for Dry Cannabis Flower"
2018,ASTM,"F3299-18 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting  Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf  >5</inf> Sensor)"
2017,ASTM,"D4774-11(2017) Standard Specification for  User Applied Drug Labels in Anesthesiology"
2017,ASTM,"D7298-06(2017) Standard Test Method for  Measurement of Comparative Legibility by Means of Polarizing    Filter Instrumentation"
2018,ASTM,"F1921/F1921M-12(2018) Standard Test Methods for  Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and  Blends Comprising the Sealing Surfaces of Flexible Webs"
2017,ASTM,"F3263-17 Standard Guide for Packaging Test Method Validation"
2018,ASTM,"D2860/D2860M-18 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&#xb0;   Angle and Constant Stress"
2018,ASTM,"F3300-18 Standard Test Method for  Abrasion Resistance of Flexible Packaging Films Using a Reciprocating  Weighted Stylus"
2018,ASTM,"F2825-18 Standard Practice for  Climatic Stressing of Packaging Systems for Single Parcel Delivery"
2018,ASTM,"D6198-18 Standard Guide for  Transport Packaging Design"
2018,ASTM,"D6199-18 Standard Practice for  Quality of Wood Members of Containers and Pallets"
2018,ASTM,"D6255/D6255M-18 Standard Specification for  Steel or Aluminum Slotted Angle Crates"
2018,ASTM,"D4504-94(2018) Standard Specification for  Molded Polyethylene Open-Head-Pails for Industrial Shipping   of Nonhazardous Goods"
2018,ASTM,"F1884-04(2018) Standard Test Methods for  Determining Residual Solvents in Packaging Materials"
2018,ASTM,"D3475-18 Standard Classification of  Child-Resistant Packages"
2018,ASTM,"D3070-18 Standard Practice for Rapid Pressure Determination of Pressurized Products"
2018,ASTM,"D3070-18 Standard Practice for Rapid Pressure Determination of Pressurized Products (Redline)"
2018,ASTM,"D3076-18 Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers"
2018,ASTM,"D3076-18 Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers (Redline)"
2018,ASTM,"D3094-18 Standard Practice for Seepage Rate of Aerosol Products"
2018,ASTM,"D3094-18 Standard Practice for Seepage Rate of Aerosol Products (Redline)"
2018,ASTM,"D3890-18 Standard Practice for  Number of Strokes to Prime a Mechanical Pump Dispenser"
2018,ASTM,"D3890-18 Standard Practice for  Number of Strokes to Prime a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D4333/D4333M-18 Standard Practice for Compatibility of Mechanical Pump Dispenser Components"
2018,ASTM,"D4333/D4333M-18 Standard Practice for Compatibility of Mechanical Pump Dispenser Components (Redline)"
2018,ASTM,"D4334-18 Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump   Dispenser"
2018,ASTM,"D4334-18 Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump   Dispenser (Redline)"
2018,ASTM,"D4335-18 Standard Practice for  Determination of Component Retention of a Mechanical Pump Dispenser"
2018,ASTM,"D4335-18 Standard Practice for  Determination of Component Retention of a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D4336-18 Standard Practice for  Determination of the Output Per Stroke of a Mechanical Pump   Dispenser"
2018,ASTM,"D4336-18 Standard Practice for  Determination of the Output Per Stroke of a Mechanical Pump   Dispenser (Redline)"
2018,ASTM,"D6534-18 Standard Practice for  Determining the Peak Force-to-Actuate of a Mechanical Pump   Dispenser"
2018,ASTM,"D6534-18 Standard Practice for  Determining the Peak Force-to-Actuate of a Mechanical Pump   Dispenser (Redline)"
2018,ASTM,"D6535/D6535M-18 Standard Practice for  Determining the Dip Tube Length of a Mechanical Pump Dispenser"
2018,ASTM,"D6535/D6535M-18 Standard Practice for  Determining the Dip Tube Length of a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser"
2018,ASTM,"D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D6633-18 Standard Practice for  Basic Functional Stability of a Mechanical Pump Dispenser"
2018,ASTM,"D6633-18 Standard Practice for  Basic Functional Stability of a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D6654-18 Standard Practice for  Basic Storage Stability of a Mechanical Pump Dispenser"
2018,ASTM,"D6654-18 Standard Practice for  Basic Storage Stability of a Mechanical Pump Dispenser (Redline)"
2018,ASTM,"D3474-90(2018) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications"
2018,ASTM,"D7660-10(2018) Standard Guide for  Conducting Internal Pressure Tests on United Nations (UN) Packagings"
2018,ASTM,"D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes"
2018,ASTM,"D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes (Redline)"
2018,ASTM,"D3951-18 Standard Practice for  Commercial Packaging"
2018,ASTM,"D3951-18 Standard Practice for  Commercial Packaging (Redline)"
2018,ASTM,"F17-18 Standard Terminology Relating to  Primary Barrier Packaging"
2018,ASTM,"F2638-18 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous  Packaging Materials as a Surrogate Microbial Barrier"
2018,ASTM,"D2063/D2063M-10(2018) Standard Test Methods for  Measurement of Torque Retention for Packages with Continuous   Thread Closures Using Non-Automated (Manual) Torque Testing Equipment"
2018,ASTM,"F34-13(2018) Standard Practice for  Construction of Test Cell for Liquid Extraction of Flexible   Barrier Materials"
2018,ASTM,"F1308-98(2018) Standard Test Method for  Quantitating Volatile Extractables in Microwave Susceptors  Used for Food Products"
2018,ASTM,"F2203-13(2018) Standard Test Method for  Linear Measurement Using Precision Steel Rule"
2018,ASTM,"D6039/D6039M-18 Standard Specification for  Open and Covered Wood Crates"
2018,ASTM,"D6039/D6039M-18 Standard Specification for  Open and Covered Wood Crates (Redline)"
2018,ASTM,"F2217/F2217M-13(2018) Standard Practice for  Coating/Adhesive Weight Determination"
2018,ASTM,"F2250-13(2018) Standard Practice for  Evaluation of Chemical Resistance of Printed Inks and Coatings   on Flexible Packaging Materials"
2018,ASTM,"F2251-13(2018) Standard Test Method for  Thickness Measurement of Flexible Packaging Material"
2018,ASTM,"F2252/F2252M-13(2018) Standard Practice for  Evaluating Ink or Coating Adhesion to Flexible Packaging Materials   Using Tape"
2018,ASTM,"D3330/D3330M-04(2018) Standard Test Method for  Peel Adhesion of Pressure-Sensitive Tape"
2018,ASTM,"D3811/D3811M-96(2018) Standard Test Method for  Unwind Force of Pressure-Sensitive Tapes"
2018,ASTM,"D4497-10(2018) Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)"
2018,ASTM,"D4577-05(2018) Standard Test Method for Compression Resistance of a Container Under Constant Load"
2018,ASTM,"D6199-18a Standard Practice for  Quality of Wood Members of Containers and Pallets"
2018,ASTM,"D6199-18a Standard Practice for  Quality of Wood Members of Containers and Pallets (Redline)"
2018,ASTM,"F17-18a Standard Terminology Relating to  Primary Barrier Packaging"
2018,ASTM,"D3111-10(2018) Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel  Bend Test  Method"
2019,ASTM,"D8219-19 Standard Guide for Cleaning and Disinfection at a Cannabis Cultivation Center"
2019,ASTM,"D8245-19 Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream  Products"
2019,ASTM,"D8233-19 Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products  for Sale to Adult Consumers, Legally Authorized Medical Users, and  Caregivers in a Business-to-Consumer Retail Environment (Retailers)"
2019,ASTM,"D8250-19 Standard Practice for  Applying a Hazard Analysis Critical Control Points (HACCP)  System for Cannabis Consumable Products"
2019,ASTM,"D3611-06(2019) Standard Practice for  Accelerated Aging of Pressure-Sensitive Tapes"
2019,ASTM,"D3815/D3815M-05(2019) Standard Practice for  Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame   Carbon-Arc Exposure Apparatus"
2019,ASTM,"D5105-05(2019) Standard Practice for  Performing Accelerated Outdoor Weathering of Pressure-Sensitive   Tapes Using Concentrated Natural Sunlight"
2019,ASTM,"D6551/D6551M-05(2019) Standard Practice for  Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc   Exposure Apparatus"
2019,ASTM,"D6252/D6252M-98(2019) Standard Test Method for  Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#xb0;   Angle"
2019,ASTM,"F3375-19 Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid  Consumer Products"
2019,ASTM,"F874-98(2019) Standard Test Method for  Temperature Measurement and Profiling for Microwave Susceptors"
2019,ASTM,"F1317-98(2019) Standard Test Method for  Calibration of Microwave Ovens"
2019,ASTM,"F1349-08(2019) Standard Test Method for  Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave  Susceptors"
2019,ASTM,"F1416-96(2019) Standard Guide for  Selection of Time-Temperature Indicators"
2019,ASTM,"F1500-98(2019) Standard Test Method for  Quantitating Non-UV-Absorbing Nonvolatile Extractables from  Microwave Susceptors Utilizing Solvents as Food Simulants"
2019,ASTM,"F1519-98(2019) Standard Test Method for  Qualitative Analysis of Volatile Extractables in Microwave   Susceptors Used to Heat Food Products"
2019,ASTM,"D4577-19 Standard Test Method for Compression Resistance of a Container Under Constant Load"
2019,ASTM,"D4577-19 Standard Test Method for Compression Resistance of a Container Under Constant Load (Redline)"
2019,ASTM,"D3111-19 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel  Bend Test"
2019,ASTM,"D3111-19 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel  Bend Test (Redline)"
2019,ASTM,"D1968-19 Standard Terminology Relating to Paper and Paper Products"
2019,ASTM,"D5276-19 Standard Test Method for  Drop Test of Loaded Containers by Free Fall"
2019,ASTM,"D5276-19 Standard Test Method for  Drop Test of Loaded Containers by Free Fall (Redline)"
2019,ASTM,"D8229-19 Standard Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis  Industry"
2019,ASTM,"D3654/D3654M-06(2019) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes"
2019,ASTM,"D3759/D3759M-05(2019) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape"
2019,ASTM,"D3833/D3833M-96(2019) Standard Test Method for  Water Vapor Transmission of Pressure-Sensitive Tapes"
2019,ASTM,"D4003-98(2019)e1 Standard Test Methods for  Programmable Horizontal Impact Test for Shipping Containers   and Systems"
2019,ASTM,"D5264-98(2019) Standard Practice for  Abrasion Resistance of Printed Materials by the Sutherland   Rub Tester"
2019,ASTM,"D5375/D5375M-98(2019) Standard Test Methods for  Liner Removal at High Speeds from Pressure-Sensitive Label   Stock"
2019,ASTM,"D6055-96(2019) Standard Test Methods for  Mechanical Handling of Unitized Loads and Large Shipping Cases  and Crates"
2019,ASTM,"D6195-03(2019) Standard Test Methods for Loop Tack"
2019,ASTM,"D6295/D6295M-98(2019) Standard Test Method for  Dispensability of Light&#x2013;Duty Pressure&#x2013;Sensitive   Film Tape"
2019,ASTM,"D3715/D3715M-98(2019) Standard Practice for  Quality Assurance of Pressure-Sensitive Tapes"
2019,ASTM,"D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development"
2019,ASTM,"D6251/D6251M-19 Standard Specification for  Wood-Cleated Panelboard Shipping Boxes"
2019,ASTM,"D6880/D6880M-19 Standard Specification for Wood Boxes"
2019,ASTM,"D6880/D6880M-19 Standard Specification for Wood Boxes (Redline)"
2019,ASTM,"D8286-19 Standard Guide for Processing Cannabis Product Complaints"
2019,ASTM,"D5748-95(2019) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film"
2019,ASTM,"D6804-19 Standard Guide for  Hand Hole Design in Corrugated Boxes"
2019,ASTM,"D7790-19 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United  Nations (UN) Drop Testing"
2019,ASTM,"D7790-19 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United  Nations (UN) Drop Testing (Redline)"
2019,ASTM,"F2096-11(2019) Standard Test Method for  Detecting Gross Leaks in Packaging by Internal Pressurization   (Bubble Test)"
2020,ASTM,"D8308-20 Standard Practice for Cannabis/Hemp Operation Compliance Audits"
2020,ASTM,"D8205-20 Standard Guide for Video Surveillance System"
2020,ASTM,"D8217-20 Standard Guide for  Access Control System"
2020,ASTM,"D8218-20 Standard Guide for Intrusion Detection System (IDS)"
2020,ASTM,"F2475-20 Standard Guide for  Biocompatibility Evaluation of Medical Device Packaging Materials"
2020,ASTM,"F2475-20 Standard Guide for  Biocompatibility Evaluation of Medical Device Packaging Materials (Redline)"
2020,ASTM,"D8270-20 Standard Terminology Relating to Cannabis"
1995,ASTM,"D1029-95 Standard Test Method for Peeling Resistance of Paper and Paperboard (Withdrawn 2001)"
1998,ASTM,"D1083-91(1998) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)"
2014,ASTM,"D1596-14 Standard Test Method for  Dynamic Shock Cushioning Characteristics of Packaging Material"
2007,ASTM,"D1968-02a(2007)e1 Standard Terminology Relating to Paper and Paper Products (Withdrawn 2010)"
2015,ASTM,"D2221-01(2015) Standard Test Method for Creep Properties of Package Cushioning Materials"
1994,ASTM,"D3097-94 Standard Test Method for Aerosol Products for Delivered Mass (Withdrawn 2003)"
2014,ASTM,"D4332-14 Standard Practice for  Conditioning Containers, Packages, or Packaging Components   for Testing"
1995,ASTM,"D5834-95 Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)"
2001,ASTM,"D6701-01 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers (Withdrawn 2008)"
2004,ASTM,"D7077-04 Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions (Withdrawn 2010)"
2017,ASTM,"D7709-12(2017) Standard Test Methods for  Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical  Bottles and Blisters"
1997,ASTM,"F151-86(1997) Standard Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)"
2003,ASTM,"F372-99(2003) Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009)"
1994,ASTM,"F1168-88(1994) Guide for Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers (Withdrawn 2000)"
2005,ASTM,"F1327-05 Standard Terminology Relating to Barrier Materials for Medical Packaging (Withdrawn 2007)"
2003,ASTM,"F1479-98(2003) Standard Terminology Relating to Microwave Food Packaging (Withdrawn 2007)"
2000,ASTM,"F1585-00 Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006)"
1997,ASTM,"F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)"
1997,ASTM,"F1770-97e1 Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)"
2014,ASTM,"D1596-14 Standard Test Method for  Dynamic Shock Cushioning Characteristics of Packaging Material (Redline)"
2018,ASTM,"D2860/D2860M-18 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&#xb0;   Angle and Constant Stress (Redline)"
2018,ASTM,"D6198-18 Standard Guide for  Transport Packaging Design (Redline)"
2018,ASTM,"F2825-18 Standard Practice for  Climatic Stressing of Packaging Systems for Single Parcel Delivery (Redline)"
2018,ASTM,"D6255/D6255M-18 Standard Specification for  Steel or Aluminum Slotted Angle Crates (Redline)"
2020,ASTM,"D3103-20 Standard Test Method for  Thermal Insulation Performance of Distribution Packages"
2020,ASTM,"D3103-20 Standard Test Method for  Thermal Insulation Performance of Distribution Packages (Redline)"
2020,ASTM,"D8220-20 Standard Guide for Conducting Recall/Removal Procedures for Products in the Cannabis  Industry"
2020,ASTM,"E171/E171M-11(2020) Standard Practice for Conditioning and Testing Flexible Barrier Packaging"
2020,ASTM,"F2054/F2054M-13(2020) Standard Test Method for  Burst Testing of Flexible Package Seals Using Internal Air   Pressurization Within Restraining Plates"
2020,ASTM,"F2824-10(2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers   with Flexible Peelable Lids"
2020,ASTM,"F2981-15(2020) Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to  the Passage of Air"
2020,ASTM,"F1140/F1140M-13(2020)e1 Standard Test Methods for  Internal Pressurization Failure Resistance of Unrestrained   Packages"
2020,ASTM,"F1249-20 Standard Test Method for  Water Vapor Transmission Rate Through Plastic Film and Sheeting   Using a Modulated Infrared Sensor"
2020,ASTM,"F1249-20 Standard Test Method for  Water Vapor Transmission Rate Through Plastic Film and Sheeting   Using a Modulated Infrared Sensor (Redline)"
2020,ASTM,"F1307-20 Standard Test Method for  Oxygen Transmission Rate Through Dry Packages Using a Coulometric   Sensor"
2020,ASTM,"F1307-20 Standard Test Method for  Oxygen Transmission Rate Through Dry Packages Using a Coulometric   Sensor (Redline)"
2020,ASTM,"F1927-20 Standard Test Method for  Determination of Oxygen Gas Transmission Rate, Permeability   and Permeance at Controlled Relative Humidity Through Barrier Materials   Using a Coulometric Detector"
2020,ASTM,"F1927-20 Standard Test Method for  Determination of Oxygen Gas Transmission Rate, Permeability   and Permeance at Controlled Relative Humidity Through Barrier Materials   Using a Coulometric Detector (Redline)"
2020,ASTM,"F2476-20 Standard Test Method for  the Determination of Carbon Dioxide Gas Transmission Rate (CO<inf  >2</inf>TR) Through Barrier Materials Using an Infrared Detector"
2020,ASTM,"F2476-20 Standard Test Method for  the Determination of Carbon Dioxide Gas Transmission Rate (CO<inf  >2</inf>TR) Through Barrier Materials Using an Infrared Detector (Redline)"
2020,ASTM,"D3475-20 Standard Classification of  Child-Resistant Packages"
2020,ASTM,"D3475-20 Standard Classification of  Child-Resistant Packages (Redline)"
2020,ASTM,"F17-20 Standard Terminology Relating to  Primary Barrier Packaging"
2020,ASTM,"F17-20 Standard Terminology Relating to  Primary Barrier Packaging (Redline)"
2020,ASTM,"E398-20 Standard Test Method for  Water Vapor Transmission Rate of Sheet Materials Using Dynamic  Relative Humidity Measurement"
2020,ASTM,"E398-20 Standard Test Method for  Water Vapor Transmission Rate of Sheet Materials Using Dynamic  Relative Humidity Measurement (Redline)"
2020,ASTM,"D7660-20 Standard Guide for  Conducting Internal Pressure Tests on United Nations (UN) Packagings"
2020,ASTM,"D7660-20 Standard Guide for  Conducting Internal Pressure Tests on United Nations (UN) Packagings (Redline)"
2020,ASTM,"D7387-20 Standard Test Method for  Vibration Testing of Intermediate Bulk Containers (IBCs) Used   for Shipping Liquid Hazardous Materials (Dangerous Goods)"
2020,ASTM,"D7387-20 Standard Test Method for  Vibration Testing of Intermediate Bulk Containers (IBCs) Used   for Shipping Liquid Hazardous Materials (Dangerous Goods) (Redline)"
2020,ASTM,"D7887-20 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances  for Packagings Subjected to the United Nations Performance Tests"
2020,ASTM,"D7887-20 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances  for Packagings Subjected to the United Nations Performance Tests (Redline)"
2020,ASTM,"F2097-20 Standard Guide for  Design and Evaluation of Primary Flexible Packaging for Medical  Products"
2020,ASTM,"D8244-20 Standard Guide for Analytical Laboratory Operations Supporting the Cannabis Industry"
2020,ASTM,"D3652/D3652M-01(2020) Standard Test Method for  Thickness of Pressure-Sensitive Tapes"
2020,ASTM,"D3816/D3816M-96(2020) Standard Test Method for  Water Penetration Rate of Pressure-Sensitive Tapes"
2020,ASTM,"D3889/D3889M-96(2020) Standard Test Method for  Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature"
2020,ASTM,"D3813/D3813M-98(2020) Standard Test Method for  Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive   Tapes"
2020,ASTM,"D6123/D6123M-97(2020) Standard Specification for  Pressure-Sensitive Tape for Light-Duty Packaging and General  Purpose Masking"
2020,ASTM,"D5330/D5330M-06(2020) Standard Specification for  Pressure-Sensitive Tape for Packaging, Filament-Reinforced"
2020,ASTM,"D6463/D6463M-06(2020) Standard Test Method for  Time to Failure of Pressure Sensitive Articles Under Sustained  Shear  Loading"
2020,ASTM,"D5728-12(2020) Standard Practices for  Securement of Cargo in Intermodal and Unimodal Surface Transport"
2020,ASTM,"D5486/D5486M-06(2020) Standard Specification for  Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing"
2020,ASTM,"D5750/D5750M-95(2020) Standard Guide for  Width and Length of Pressure-Sensitive Tape"
2020,ASTM,"D5118/D5118M-15(2020) Standard Practice for  Fabrication of Fiberboard Shipping Boxes"
2020,ASTM,"D6179-20 Standard Test Methods for  Rough Handling of Unitized Loads and Large Shipping Cases and  Crates"
2020,ASTM,"D6179-20 Standard Test Methods for  Rough Handling of Unitized Loads and Large Shipping Cases and  Crates (Redline)"
2020,ASTM,"D642-20 Standard Test Method for  Determining Compressive Resistance of Shipping Containers,   Components, and Unit Loads"
2020,ASTM,"D642-20 Standard Test Method for  Determining Compressive Resistance of Shipping Containers,   Components, and Unit Loads (Redline)"
2020,ASTM,"D6590/D6590M-00(2020) Standard Specification for  Pressure-Sensitive Tape for Sealing Fiber Containers and Cans"
2020,ASTM,"D6881/D6881M-03(2020) Standard Classification for  Standard Plastics Industry Bulk Box/Pallet Unit Size Classified  By Bulk Density"
2020,ASTM,"D6573/D6573M-13(2020) Standard Specification for  General Purpose Wirebound Shipping Boxes"
2020,ASTM,"D6254/D6254M-20 Standard Specification for  Wirebound Pallet-Type Wood Boxes"
2020,ASTM,"D6254/D6254M-20 Standard Specification for  Wirebound Pallet-Type Wood Boxes (Redline)"
2020,ASTM,"F2622-20 Standard Test Method for  Oxygen Gas Transmission Rate Through Plastic Film and Sheeting  Using Various Sensors"
2020,ASTM,"F2622-20 Standard Test Method for  Oxygen Gas Transmission Rate Through Plastic Film and Sheeting  Using Various Sensors (Redline)"
2020,ASTM,"D5458-95(2020) Standard Test Method for  Peel Cling of Stretch Wrap Film"
2020,ASTM,"D5459-95(2020) Standard Test Method for  Machine Direction Elastic Recovery and Permanent Deformation  and Stress Retention of Stretch Wrap Film"
2020,ASTM,"D5663-15(2020) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard"
2020,ASTM,"D5833-12(2020) Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans"
2020,ASTM,"D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory  Analyses"
2020,ASTM,"F2338-09(2020) Standard Test Method for  Nondestructive Detection of Leaks in Packages by Vacuum Decay  Method"
2020,ASTM,"F3004-13(2020) Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound"
2020,ASTM,"D8314-20 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping"
2020,ASTM,"D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction  Based on Performance Requirements"
2020,ASTM,"D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction  Based on Performance Requirements (Redline)"
2020,ASTM,"D5414-95(2020) Standard Test Method for  Evaluation of Horizontal Impact Performance of Load Unitizing  Stretch Wrap Films"
2020,ASTM,"D5416-95(2020) Standard Test Method for  Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration  Testing"
2020,ASTM,"D8196-20 Standard Practice for Determination of Water Activity (<emph type=""ital"">a<inf>w</inf  ></emph>) in Cannabis Flower"
2020,ASTM,"D5415-95(2020) Standard Test Method for  Evaluating Load Containment Performance of Stretch Wrap Films  by Vibration Testing"
2020,ASTM,"D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application"
2020,ASTM,"D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application (Redline)"
2021,ASTM,"F99-21 Standard Guide for  Writing a Specification for Flexible Barrier Rollstock Materials"
2021,ASTM,"F99-21 Standard Guide for  Writing a Specification for Flexible Barrier Rollstock Materials (Redline)"
2021,ASTM,"F1306-21 Standard Test Method for  Slow Rate Penetration Resistance of Flexible Barrier Films  and Laminates"
2021,ASTM,"F1306-21 Standard Test Method for  Slow Rate Penetration Resistance of Flexible Barrier Films  and Laminates (Redline)"
2021,ASTM,"D3078-02(2021)e1 Standard Test Method for  Determination of Leaks in Flexible Packaging by Bubble Emission"
1999,ASTM,"D1968-99a Standard Terminology Relating to Paper and Paper Products"
1985,ASTM,"D4353-85 Test Method for Basic Stability of a mechanical Pump Dispenser and Product (Withdrawn 1995)"
2021,ASTM,"D6701-21 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven  and Plastic Barriers"
2021,ASTM,"D6701-21 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven  and Plastic Barriers (Redline)"
2021,ASTM,"D8222-21 Standard Guide for Establishing a Quality Management System (QMS) for Consumer  Use of Cannabis/Hemp Products"
2021,ASTM,"F2095-07(2021) Standard Test Methods for  Pressure Decay Leak Test for Flexible Packages With and Without  Restraining Plates"
2021,ASTM,"F2227-13(2021) Standard Test Method for  Non-Destructive Detection of Leaks in Non-sealed and Empty  Packaging Trays by CO<inf>2</inf> Tracer Gas Method"
2021,ASTM,"F2228-13(2021) Standard Test Method for  Non-Destructive Detection of Leaks in Packaging Which Incorporates  Porous Barrier Material by CO<inf>2</inf> Tracer Gas Method"
2021,ASTM,"D8244-21 Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp  Industry"
2021,ASTM,"F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay"
1986,ASTM,"D775-80(1986) Method for Drop Test for Loaded Boxes (Withdrawn 1993)"
1996,ASTM,"D3759M-96 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes [Metric] (Withdrawn 1998)"
2021,ASTM,"D8197-21 Standard Specification for Maintaining Acceptable Water Activity (<emph type=""ital"">a<inf  >w</inf></emph>) Range (0.55 to 0.65) for Dry Cannabis Flower Intended  for Human/Animal Use"
2021,ASTM,"D8308-21 Standard Practice for Cannabis/Hemp Operation Compliance Audits"
2021,ASTM,"D8308-21 Standard Practice for Cannabis/Hemp Operation Compliance Audits (Redline)"
2021,ASTM,"F2029-16(2021) Standard Practices for  Making Laboratory Heat Seals for Determination of Heat Sealability  of Flexible  Barrier Materials as Measured by Seal Strength"
2021,ASTM,"D3811/D3811M-21 Standard Test Method for  Unwind Force of Pressure-Sensitive Tapes"
2021,ASTM,"D8372-21 Standard Guide for Cannabis/Hemp Extract Vaporizers"
2021,ASTM,"D8346-21 Standard Guide for Certification Requirements for Quality Professional Vocations  Within the Cannabis/Hemp Industry"
2021,ASTM,"D8347-21 Standard Guide for Certification Requirements for Analytical Laboratory Professional  Vocations Within the Cannabis Industry"
2021,ASTM,"D8348-21 Standard Guide for Certification Requirements for Transportation and Logistics  Related Vocations Within the Cannabis/Hemp Industry"
2021,ASTM,"D8357-21 Standard Classification for Cannabis/Hemp Flower Vaporizers"
2021,ASTM,"D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp  Industry"
2021,ASTM,"D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp  Industry (Redline)"
2021,ASTM,"D8270-21a Standard Terminology Relating to Cannabis"
2021,ASTM,"D8270-21 Standard Terminology Relating to Cannabis"
2021,ASTM,"D8373-21 Standard Guide for Cannabis/Hemp Flower Vaporizers"
2021,ASTM,"D8376-21 Standard Classification for Cannabis/Hemp Extract Vaporizers"
2021,ASTM,"D8374-21 Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances"
2021,ASTM,"D8390-21 Standard Classification for Domestic Cannabis/Hemp Plant Indoor Growing Appliances"
2021,ASTM,"D8309-21 Standard Guide for Stability Testing of Cannabis-Based Products"
2021,ASTM,"D8222-21a Standard Guide for Establishing a Quality Management System (QMS) for Consumer  Use of Cannabis/Hemp Products"
2021,ASTM,"D8222-21a Standard Guide for Establishing a Quality Management System (QMS) for Consumer  Use of Cannabis/Hemp Products (Redline)"
2021,ASTM,"D8320-21 Standard Practice for Implementing an Information Security Program in a Cannabis  Operation"
1980,ASTM,"D959-80 Method of Drop Test for Filled Bags"
1986,ASTM,"D997-80(1986)e1 Method for Drop Test for Loaded Cylindrical Containers"
2021,ASTM,"D8343/D8343M-21 Standard Practice for Measuring the Physical Properties of Cannabis/Hemp Pre-rolls"
2021,ASTM,"D8342/D8342M-21 Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp  Pre-roll"
2021,ASTM,"D8400-21 Standard Guide for Assessing Spoilage of Hemp Seed Intended for Human Consumption"
2021,ASTM,"F1608-21 Standard Test Method for  Microbial Ranking of Porous Packaging Materials (Exposure Chamber   Method)"
2021,ASTM,"F1608-21 Standard Test Method for  Microbial Ranking of Porous Packaging Materials (Exposure Chamber   Method) (Redline)"
2021,ASTM,"D8410-21 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and  Products for Compostability in Municipal or Industrial Aerobic Composting  Facilities"
2021,ASTM,"F2559/F2559M-21 Standard Guide for  Writing a Specification for Sterilizable Peel Pouches"
2021,ASTM,"F2559/F2559M-21 Standard Guide for  Writing a Specification for Sterilizable Peel Pouches (Redline)"
2021,ASTM,"D880-92(2021) Standard Test Method for Impact Testing for Shipping Containers and Systems"
2021,ASTM,"D1596-14(2021) Standard Test Method for  Dynamic Shock Cushioning Characteristics of Packaging Material"
2021,ASTM,"D2221-01(2021) Standard Test Method for Creep Properties of Package Cushioning Materials"
2021,ASTM,"D4168-95(2021) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning  Materials"
2021,ASTM,"D5077-90(2021) Standard Terminology Relating to  Electrostatic Discharge (ESD) Packaging Materials"
2021,ASTM,"D6537-00(2021) Standard Practice for  Instrumented Package Shock Testing For Determination of Package   Performance"
2021,ASTM,"D6653/D6653M-13(2021) Standard Test Methods for  Determining the Effects of High Altitude on Packaging Systems   by Vacuum Method"
2021,ASTM,"F88/F88M-21 Standard Test Method for  Seal Strength of Flexible Barrier Materials"
2021,ASTM,"F1278-96(2021)e1 Standard Guide for  Use and Handling of Flexible Retort Food Pouches in the Processing  Environment"
2021,ASTM,"F1980-21 Standard Guide for  Accelerated Aging of Sterile Barrier Systems and Medical Devices"
2021,ASTM,"F1980-21 Standard Guide for  Accelerated Aging of Sterile Barrier Systems and Medical Devices (Redline)"
2021,ASTM,"D8417-21 Standard Guide for Sampling of Hempseed Intended for Human Consumption"
2021,ASTM,"D8409-21 Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or  Unguided Loads"
2021,ASTM,"D5445-21 Standard Practice for  Pictorial Markings for Handling of Goods"
2021,ASTM,"D5445-21 Standard Practice for  Pictorial Markings for Handling of Goods (Redline)"
2021,ASTM,"D8403-21 Standard Practice for Certificate Programs within the Cannabis and Hemp Industries"
2021,ASTM,"D8346-21a Standard Guide for Requirements for Quality Related Professions   Within the Cannabis  and Hemp Industries"
2021,ASTM,"D8346-21a Standard Guide for Requirements for Quality Related Professions   Within the Cannabis  and Hemp Industries (Redline)"
2021,ASTM,"D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions  Within the Cannabis and Hemp Industries"
2021,ASTM,"D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions  Within the Cannabis and Hemp Industries (Redline)"
2021,ASTM,"D8348-21a Standard Guide for Requirements for Transportation and Logistics Related Professions  Within the Cannabis and Hemp Industries"
2021,ASTM,"D8348-21a Standard Guide for Requirements for Transportation and Logistics Related Professions  Within the Cannabis and Hemp Industries (Redline)"
2022,ASTM,"D4169-22 Standard Practice for Performance Testing of Shipping Containers and Systems"
2022,ASTM,"D4169-22 Standard Practice for Performance Testing of Shipping Containers and Systems (Redline)"
2022,ASTM,"D8441/D8441M-22 Standard Specification for International Symbol for Identifying Consumer Products Containing  Intoxicating Cannabinoids"
2022,ASTM,"D8270-22a Standard Terminology Relating to Cannabis"
2022,ASTM,"D8270-22 Standard Terminology Relating to Cannabis"
2021,ASTM,"F392/F392M-21 Standard Practice for  Conditioning Flexible Barrier Materials for Flex  Durability"
2021,ASTM,"D3811/D3811M-21a Standard Test Method for  Unwind Force of Pressure-Sensitive Tapes"
2021,ASTM,"D3811/D3811M-21a Standard Test Method for  Unwind Force of Pressure-Sensitive Tapes (Redline)"
2022,ASTM,"D1968-22 Standard Terminology Relating to Paper and Paper Products"
2022,ASTM,"D1968-22 Standard Terminology Relating to Paper and Paper Products (Redline)"
2022,ASTM,"D4727/D4727M-22 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade)   and Cut Shapes"
2022,ASTM,"D4727/D4727M-22 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade)   and Cut Shapes (Redline)"
2022,ASTM,"D685-22 Standard Practice for  Conditioning Paper and Paper Products for Testing"
2022,ASTM,"D685-22 Standard Practice for  Conditioning Paper and Paper Products for Testing (Redline)"
2022,ASTM,"D5168-22 Standard Practice for  Fabrication and Closure of Triple-Wall Corrugated Fiberboard  Containers"
2022,ASTM,"D5168-22 Standard Practice for  Fabrication and Closure of Triple-Wall Corrugated Fiberboard  Containers (Redline)"
2022,ASTM,"D5487-16(2022) Standard Test Method for  Simulated Drop of Loaded Containers by Shock Machines"
2022,ASTM,"D5570/D5570M-10(2022) Standard Test Method for  Water Resistance of Tape and Adhesives Used as Box Closure"
2022,ASTM,"D4728-17(2022) Standard Test Method for Random Vibration Testing of Shipping Containers"
2022,ASTM,"D7030-04(2022) Standard Test Method for  Short Term Creep Performance of Corrugated Fiberboard Containers  Under Constant Load Using a Compression Test Machine"
2022,ASTM,"D8440-22 Standard Specification for Food Safety and Quality of Hempseed Products Intended for Human  Consumption"
2022,ASTM,"D4332-22 Standard Practice for  Conditioning Containers, Packages, or Packaging Components   for Testing"
2022,ASTM,"D4332-22 Standard Practice for  Conditioning Containers, Packages, or Packaging Components   for Testing (Redline)"
2022,ASTM,"F2638-22 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous  Packaging Materials as a Surrogate Microbial Barrier"
2022,ASTM,"F2638-22 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous  Packaging Materials as a Surrogate Microbial Barrier (Redline)"
2022,ASTM,"D8450-22 Standard Specification for Environmental Conditions While Packaging Cannabis/Hemp Flower"
2022,ASTM,"D1974/D1974M-22 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes"
2022,ASTM,"D1974/D1974M-22 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes (Redline)"
2022,ASTM,"D8398-22 Standard Practice for Management Responsibilities in Managing a Quality Management  System  (QMS)"
2022,ASTM,"F904-22 Standard Practice for  Separation of Plies for Bond Strength of Laminated Flexible  Materials"
2022,ASTM,"F904-22 Standard Practice for  Separation of Plies for Bond Strength of Laminated Flexible  Materials (Redline)"
2022,ASTM,"D8433-22 Standard Specification for Food Safety and Quality of Hempseed Intended for Dehulling  or Oil Extraction Food Purposes"
2022,ASTM,"D8399-22 Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and  Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry  (LC-MS/MS)"
2022,ASTM,"D8452-22 Standard Guide for Requirements for Medical-related Professionals within the Cannabis  and Hemp Industries"
2022,ASTM,"D8423-22 Standard Specification for Environmental Conditions for Post-packaged Storage and Retail  Merchandising of Cannabis/Hemp Flower"
2022,ASTM,"D8432-22 Standard Specification for Environmental Conditions while In Transit for Packaged Cannabis/Hemp  Flower"
2022,ASTM,"D8375-22 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis  and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry  (LC-MS/MS)"
2022,ASTM,"D8439-22 Standard Specification for Medicinal-use Cannabis Inflorescence"
2022,ASTM,"D3953-15(2022) Standard Specification for  Strapping, Flat Steel and Seals"
2022,ASTM,"D4279-95(2022) Standard Test Methods for  Water Vapor Transmission of Shipping Containers—Constant  and Cycle Methods"
2022,ASTM,"D4675-14a(2022) Standard Guide for  Selection and Use of Flat Strapping Materials<sup>1</sup>"
2022,ASTM,"D7860-14(2022) Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child  Resistant Packages with Continuous Thread Closures Using Automated  Torque Testing Equipment"
2022,ASTM,"F2203-13(2022) Standard Test Method for  Linear Measurement Using Precision Steel Rule"
2022,ASTM,"D3580-22 Standard Test Methods for  Vibration (Vertical Linear Motion) Test of Products"
2022,ASTM,"D3580-22 Standard Test Methods for  Vibration (Vertical Linear Motion) Test of Products (Redline)"
2022,ASTM,"D5112-22 Standard Test Method for  Vibration (Horizontal Linear Motion) Test of Products"
2022,ASTM,"D5112-22 Standard Test Method for  Vibration (Horizontal Linear Motion) Test of Products (Redline)"
2022,ASTM,"D8477-22 Standard Practice for Cannabis or Hemp Supplier Lifecycle Management"
2022,ASTM,"D8469-22 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively  Coupled Plasma Mass Spectrometry (ICP-MS)"
2022,ASTM,"D5277-22 Standard Test Method for  Performing Programmed Horizontal Impacts Using an Inclined   Impact Tester"
2022,ASTM,"D5277-22 Standard Test Method for  Performing Programmed Horizontal Impacts Using an Inclined   Impact Tester (Redline)"
2022,ASTM,"D8442-22 Standard Test Method for Determination of Cannabinoids in Cannabis Raw Materials and  Resin Cannabis Products by Gas Chromatography and Flame Ionization  Detection"
2022,ASTM,"D5571-22 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head  Drums Not Exceeding 60 Gal (227 L) in Rated Capacity"
2022,ASTM,"D5571-22 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head  Drums Not Exceeding 60 Gal (227 L) in Rated Capacity (Redline)"
2022,ASTM,"D6195-22 Standard Test Methods for Loop Tack"
2022,ASTM,"D6195-22 Standard Test Methods for Loop Tack (Redline)"
2022,ASTM,"D8196-22 Standard Practice for Determination of Water Activity (<emph type=""ital"">a<inf>w</inf  ></emph>) in Cannabis Flower"
2022,ASTM,"D8196-22 Standard Practice for Determination of Water Activity (<emph type=""ital"">a<inf>w</inf  ></emph>) in Cannabis Flower (Redline)"
2022,ASTM,"D8197-22 Standard Specification for Maintaining Acceptable Water Activity (<emph type=""ital"">a<inf  >w</inf></emph>) Range (0.55 to 0.65) for Dry Cannabis Flower Intended  for Human/Animal Use"
2022,ASTM,"D8197-22 Standard Specification for Maintaining Acceptable Water Activity (<emph type=""ital"">a<inf  >w</inf></emph>) Range (0.55 to 0.65) for Dry Cannabis Flower Intended  for Human/Animal Use (Redline)"
2021,ASTM,"D1975-21 Standard Test Method for  Environmental Stress Crack Resistance of Plastic Injection   Molded Open Head Pails"
2021,ASTM,"D1975-21 Standard Test Method for  Environmental Stress Crack Resistance of Plastic Injection   Molded Open Head Pails (Redline)"
2022,ASTM,"D8410-22 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and  Products for Compostability in Municipal or Industrial Aerobic Composting  Facilities"
2022,ASTM,"D8410-22 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and  Products for Compostability in Municipal or Industrial Aerobic Composting  Facilities (Redline)"
2022,ASTM,"D5118/D5118M-22 Standard Practice for  Fabrication of Fiberboard Shipping Boxes"
2022,ASTM,"D5118/D5118M-22 Standard Practice for  Fabrication of Fiberboard Shipping Boxes (Redline)"
2022,ASTM,"F2391-22 Standard Test Method for  Measuring Package and Seal Integrity Using Helium as the Tracer   Gas"
2022,ASTM,"F2391-22 Standard Test Method for  Measuring Package and Seal Integrity Using Helium as the Tracer   Gas (Redline)"
2022,ASTM,"F119-82(2022) Standard Test Method for  Rate of Grease Penetration of Flexible Barrier Materials (Rapid  Method)"
2022,ASTM,"F3136-22 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting  using a Dynamic Accumulation Method"
2022,ASTM,"F3136-22 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting  using a Dynamic Accumulation Method (Redline)"
2023,ASTM,"D8493-23 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory  Analysis"
2023,ASTM,"D8465-23 Standard Guide for Whole Hemp Seed Storage at Primary Production Facilities"
2023,ASTM,"D4991-07(2023) Standard Test Method for  Leakage Testing of Empty Rigid Containers by Vacuum Method"
2023,ASTM,"D6788-02(2023) Standard Specification for  Repositionable Pressure-Sensitive Flags"
2023,ASTM,"D2658-18(2023) Standard Test Method for Determining Dimensions of Fiberboard Boxes"
2023,ASTM,"D6787/D6787M-02(2023) Standard Specification for  Repositionable Note Pad"
2023,ASTM,"D8135-17(2023) Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling  Substances for Packagings Subjected to the United Nations Performance  Tests"
2023,ASTM,"D996-23 Standard Terminology of  Packaging and Distribution Environments"
2023,ASTM,"D996-23 Standard Terminology of  Packaging and Distribution Environments (Redline)"
2023,ASTM,"D8375-23 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis  and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry  (LC-MS/MS)"
2023,ASTM,"D8375-23 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis  and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry  (LC-MS/MS) (Redline)"
2023,ASTM,"D8399-23 Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and  Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry  (LC-MS/MS)"
2023,ASTM,"D8399-23 Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and  Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry  (LC-MS/MS) (Redline)"
2023,ASTM,"D5265-23 Standard Test Method for  Bridge Impact Testing"
2023,ASTM,"D5265-23 Standard Test Method for  Bridge Impact Testing (Redline)"
2023,ASTM,"F34-13(2023) Standard Practice for  Construction of Test Cell for Liquid Extraction of Flexible   Barrier Materials"
2023,ASTM,"F1308-98(2023) Standard Test Method for  Quantitating Volatile Extractables in Microwave Susceptors  Used for Food Products"
2023,ASTM,"F1884-04(2023) Standard Test Methods for  Determining Residual Solvents in Packaging Materials"
2023,ASTM,"F1921/F1921M-12(2023) Standard Test Methods for  Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and  Blends Comprising the Sealing Surfaces of Flexible Webs"
2023,ASTM,"F2251-13(2023) Standard Test Method for  Thickness Measurement of Flexible Packaging Material"
2023,ASTM,"F2013-10(2023) Standard Test Method for  Determination of Residual Acetaldehyde in Polyethylene Terephthalate   Bottle Polymer Using an Automated Static Head-Space Sampling Device   and a Capillary GC with a Flame Ionization Detector"
2023,ASTM,"D8270-23 Standard Terminology Relating to Cannabis"
2023,ASTM,"D4919-23 Standard Guide for  Testing of Hazardous Materials (Dangerous Goods) Packagings"
2023,ASTM,"D4919-23 Standard Guide for  Testing of Hazardous Materials (Dangerous Goods) Packagings (Redline)"
2023,ASTM,"D8449-23 Standard Specification for Label Content and Style, Format, Location, and Prominence of  Elements for Consumer Products Containing Cannabinoids"
2023,ASTM,"D7709-12(2023) Standard Test Methods for  Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical  Bottles and Blisters"
2023,ASTM,"F1115-16(2023) Standard Test Method for  Determining the Carbon Dioxide Loss of Beverage Containers"
2023,ASTM,"F3299-18(2023) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting  Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf  >5</inf> Sensor)"
2023,ASTM,"D8499-23 Standard Guide for Meeting the Specifications of ASTM D8432"
2023,ASTM,"D8500-23 Standard Guide for Meeting the Specifications of ASTM D8423"
2023,ASTM,"F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier  Materials by Dye Penetration"
2023,ASTM,"F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier  Materials by Dye Penetration (Redline)"
2023,ASTM,"D1434-23 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film   and Sheeting"
2023,ASTM,"D1434-23 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film   and Sheeting (Redline)"
2023,ASTM,"D8498-23 Standard Guide for Compliance to the Specifications of ASTM D8450"
2023,ASTM,"F3300-23 Standard Test Method for  Abrasion Resistance of Flexible Packaging Films Using a Reciprocating  Weighted Stylus"
2023,ASTM,"F3300-23 Standard Test Method for  Abrasion Resistance of Flexible Packaging Films Using a Reciprocating  Weighted Stylus (Redline)"
2023,ASTM,"D8270-23b Standard Terminology Relating to Cannabis"
2023,ASTM,"D8270-23b Standard Terminology Relating to Cannabis (Redline)"
2023,ASTM,"D8270-23a Standard Terminology Relating to Cannabis"
2023,ASTM,"F88/F88M-23 Standard Test Method for  Seal Strength of Flexible Barrier Materials"
2023,ASTM,"F88/F88M-23 Standard Test Method for  Seal Strength of Flexible Barrier Materials (Redline)"
2023,ASTM,"D1596-14(2023) Standard Test Method for  Dynamic Shock Cushioning Characteristics of Packaging Material"
2023,ASTM,"D3332-99(2023) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines"
2023,ASTM,"D3951-18(2023) Standard Practice for  Commercial Packaging"
2023,ASTM,"D4577-19(2023) Standard Test Method for Compression Resistance of a Container Under Constant Load"
2023,ASTM,"D5276-19(2023) Standard Test Method for  Drop Test of Loaded Containers by Free Fall"
2023,ASTM,"D7932-17(2023) Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme  Distribution Environments"
2023,ASTM,"D3950-23 Standard Specification for Strapping, Nonmetallic (and Joining Methods)"
2023,ASTM,"D3950-23 Standard Specification for Strapping, Nonmetallic (and Joining Methods) (Redline)"
2023,ASTM,"F2097-23 Standard Guide for  Design and Evaluation of Primary Flexible Packaging for Medical  Products"
2023,ASTM,"F2097-23 Standard Guide for  Design and Evaluation of Primary Flexible Packaging for Medical  Products (Redline)"
2023,ASTM,"D7790-19(2023) Standard Guide for Preparation of Plastic Packagings Containing Liquids for United  Nations (UN) Drop Testing"
2023,ASTM,"D8134-18(2023) Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations  (UN) IBC Design Types"
2023,ASTM,"F392/F392M-23 Standard Practice for  Conditioning Flexible Barrier Materials for Flex  Durability"
2023,ASTM,"F392/F392M-23 Standard Practice for  Conditioning Flexible Barrier Materials for Flex  Durability (Redline)"
2023,ASTM,"D3474-23 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications"
2023,ASTM,"D3474-23 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications (Redline)"
2023,ASTM,"F2217/F2217M-13(2023) Standard Practice for  Coating/Adhesive Weight Determination"
2023,ASTM,"D6251/D6251M-23 Standard Specification for  Wood-Cleated Panelboard Shipping Boxes"
2023,ASTM,"D6251/D6251M-23 Standard Specification for  Wood-Cleated Panelboard Shipping Boxes (Redline)"
2023,ASTM,"D999-08(2023) Standard Test Methods for  Vibration Testing of Shipping Containers"
2023,ASTM,"F1929-23 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration"
2023,ASTM,"F1929-23 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration (Redline)"
2024,ASTM,"D6788-24 Standard Specification for  Repositionable Pressure-Sensitive Flags"
2024,ASTM,"D6788-24 Standard Specification for  Repositionable Pressure-Sensitive Flags (Redline)"
2024,ASTM,"D6787/D6787M-24 Standard Specification for  Repositionable Note Pad"
2024,ASTM,"D6787/D6787M-24 Standard Specification for  Repositionable Note Pad (Redline)"
2024,ASTM,"D6804-24 Standard Guide for  Hand Hole Design in Corrugated Boxes"
2024,ASTM,"D6804-24 Standard Guide for  Hand Hole Design in Corrugated Boxes (Redline)"
2024,ASTM,"D5749-24 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing"
2024,ASTM,"D5749-24 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing (Redline)"
2023,ASTM,"D4169-23e1 Standard Practice for Performance Testing of Shipping Containers and Systems"
2023,ASTM,"D4169-23 Standard Practice for Performance Testing of Shipping Containers and Systems"
2024,ASTM,"D6253-24 Standard Practice for  Treatment and/or Marking of Wood Packaging Materials"
2024,ASTM,"D6253-24 Standard Practice for  Treatment and/or Marking of Wood Packaging Materials (Redline)"