2007,ASME,"ASME A17.1/CSA B44 Safety Code for Elevators and Escalators "
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems "
2004,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) "
1997,ASME,"ASME A112.6.1M Floor-Affixed Supports For Off-The-Floor Plumbing Fixtures For Public Use "
2001,ASME,"ASME A112.6.3 Floor And Trench Drains "
1983,ASME,"ASME B1.20.1 Pipe Threads, General Purpose (Inch) "
2005,ASME,"ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings (Classes 25, 125, and 250) "
2006,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
2006,ASME,"ASME B16.4 Gray Iron Threaded Fittings (Classes 125 and 250) "
2003,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings (NPS 1/2 Through NPS 24 Metric/Inch Standard) "
2007,ASME,"ASME B16.9 Factory-Made Wrought Buttwelding Fittings "
2005,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded "
1998,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings "
1991,ASME,"ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads "
2006,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings (Classes 125 and 250) "
2001,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings "
2001,ASME,"ASME B16.22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings "
2002,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWW "
2006,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings (Classes 150, 300, 600, 900, 1500, and 2500) "
2004,ASME,"ASME B16.34 Valves - Flanged, Threaded, and Welding End "
2006,ASME,"ASME B16.36 Orifice Flanges "
1998,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions (Classes150, 250, and 300) "
1998,ASME,"ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings (Classes 150 And 300) "
1987,ASME,"ASME B18.2.2 Square and Hex Nuts (Inch Series) "
1997,ASME,"ASME B18.6.1 Wood Screws (INCH SERIES) "
2007,ASME,"ASME B31.1 Power Piping "
2006,ASME,"ASME B31.5 Refrigeration Piping and Heat Transfer Components "
2007,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems "
2008,ASME,"ASME B31.9 Building Services Piping "
2005,ASME,"ASME B40.100 Pressure Gauges and Gauge Attachments "
2008,ASME,"ASME B40.200 Thermometers, Direct Reading and Remote Reading "
1991,ASME,"ASME A112.36.2M Cleanouts "
1997,ASME,"ASME PTC 10 Performance Test Code on Compressors and Exhausters "
2008,ASME,"ASME PTC 19.11 Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle "
2004,ASME,"ASME PTC 19.5 Flow Measurement "
2003,ASME,"ASME B1.1 Unified Inch Screw Threads "
1976,ASME,"ASME B1.20.3 Dryseal Pipe Threads (Inch) "
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads (Inch) "
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile "
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads "
2000,ASME,"ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves "
1967,ASME,"ASME B17.1 Keys and Keyseats "
2003,ASME,"ASME B18.3 Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series) "
1998,ASME,"ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series) "
2003,ASME,"ASME B18.6.3 Machine Screws and Machine Screw Nuts "
1977,ASME,"ASME B27.7 General Purpose Tapered and Reduced Cross Section Retaining Rings "
2005,ASME,"ASME B30.10 Hooks "
2007,ASME,"ASME B30.16 Overhead Hoists (Underhung) "
2006,ASME,"ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) "
2005,ASME,"ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) "
2005,ASME,"ASME B30.22 Articulating Boom Cranes "
2007,ASME,"ASME B30.5 Mobile and Locomotive Cranes "
2004,ASME,"ASME B30.8 Floating Cranes and Floating Derricks "
2008,ASME,"ASME B31.3 Process Piping "
2006,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids "
2004,ASME,"ASME B36.10M Welded and Seamless Wrought Steel Pipe "
1999,ASME,"ASME HST-1 Performance Standard for Electric Chain Hoists "
1999,ASME,"ASME HST-3 Performance Standard for Manually Lever Operated Chain Hoists "
1999,ASME,"ASME HST-4 Performance Standard for Overhead Electric Wire Rope Hoists "
2009,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded "
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings "
2007,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges - Ring-Joint, Spiral Wound, and Jacketed "
2005,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges "
2007,ASME,"ASME B16.25 Standard for Buttwelding Ends "
2006,ASME,"ASME B16.26 Standard for Cast Copper Alloy Fittings for Flared Copper Tubes "
2007,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV "
2002,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psi, Sizes NPS 1/2 - NPS 2 "
2007,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) "
2008,ASME,"ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems "
2009,ASME,"ASME B16.5 Standard for Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 "
1967,ASME,"ASME B17.2 Woodruff Keys and Keyseats "
1999,ASME,"ASME B18.21.1 Lock Washers (Inch Series) "
1999,ASME,"ASME B18.21.2M Lock Washers (Metric Series) "
2004,ASME,"ASME B18.24 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products "
2002,ASME,"ASME B29.100 Precision Power Transmission, Dbl-P-Power Transmission, Dbl-P-conveyor Roller Chains, Attachments and Sprockets "
2004,ASME,"ASME B36.19M Stainless Steel Pipe "
2009,ASME,"ASME B4.1 Preferred Limits and Fits for Cylindrical Parts "
2002,ASME,"ASME B46.1 Surface Texture (Surface Roughness, Waviness and Lay) "
2009,ASME,"ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers"
2009,ASME,"ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves "
2009,ASME,"ASME B16.34 Valves-Flanged, Threaded, and Welding End "
2009,ASME,"ASME B16.36 Orifice Flanges "
2009,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions - Classes 150, 250, and 300 "
2009,ASME,"ASME B18.21.1 Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series) "
2010,ASME,"ASME B30.8 Floating Cranes and Floating Derricks "
2009,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids "
2010,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems "
2004,ASME,"ASME B36.19M-2004 Reaffirmed 2010 Stainless Steel Pipe "
2005,ASME,"ASME B 18.2.1-1996 Reaffirmed 2005 Square and Hex Bolts and Screws (Inch Series) "
2004,ASME,"ASME B36.10M-2004 Reaffirmed 2010 Welded and Seamless Wrought Steel Pipe "
2010,ASME,"ASME B31.5-2010 Refrigeration Piping and Heat Transfer Components "
2009,ASME,"ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) "
1999,ASME,"ASME HST-3-1999 Reaffirmed 2010 Performance Standard for Manually Lever Operated Chain Hoists "
1999,ASME,"ASME HST-4-1999 Reaffirmed 2010 Performance Standard for Overhead Electric Wire Rope Hoists "
2006,ASME,"ASME B30.9 Slings "
2004,ASME,"ASME A17.1 Safety Code for Elevators and Escalators "
2009,ASME,"ASME B30.1 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries "
2010,ASME,"ASME A17.1 Safety Code for Elevators and Escalators "
2010,ASME,"ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings "
2010,ASME,"ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads "
2011,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges "
2010,ASME,"ASME A17.1/CSA B44 Handbook "
2004,ASME,"ASME PTC 1 General Instructions "
2009,ASME,"ASME B20.1 Safety Standard for Conveyors and Related Equipment "
2011,ASME,"ASME B30.2 Overhead and Gantry Cranes "
2009,ASME,"ASME B30.10 Hooks "
1997,ASME,"ASME PTC 10 Performance Test Code on Compressors and Exhausters "
2010,ASME,"ASME B30.9 Slings "
2010,ASME,"ASME B31.3 Process Piping "
2011,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings "
2010,ASME,"ASME B31.1 Power Piping "
2011,ASME,"ASME B31.9 Building Services Piping "
2011,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
2010,ASME,"ASME B30.22 Articulating Boom Cranes "
2000,ASME,"ASME A17.1 Elevator Code "
1981,ASME,"ASME Y14.13M Mechanical Spring Representation "
2004,ASME,"ASME Y14.100 Engineering Drawing Practices "
2011,ASME,"ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures "
1984,ASME,"ASME B94.6 Knurling "
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads "
1993,ASME,"ASME B29.1M Precision Power Transmission Roller Chains, Attachments And Sprockets "
2006,ASME,"ASME B18.10 Track Bolts and Nuts "
2010,ASME,"ASME B18.6.3 Machine Screws, Tapping Screws, and Metallic Drive Screws "
1997,ASME,"ASME Y14.35M Revision of Engineering Drawings and Associated Documents "
1996,ASME,"ASME Y14.36M Surface Texture Symbols "
2007,ASME,"ASME Y14.38 Abbreviations and Acronyms for Use on Drawings and Related Documents "
2008,ASME,"ASME B18.5 Round Head Bolts "
2011,ASME,"ASME B18.13.1M Screw and Washer Assemblies-Sems "
2008,ASME,"ASME Y14.34 Associated Lists "
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols"
2008,ASME,"ASME Y14.2 Line Conventions and Lettering "
2004,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines "
1997,ASME,"ASME B29.10M Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth "
2011,ASME,"ASME B16-42-2011 "
1998,ASME,"ASME B18.15M Metric Lifting Eyes "
1994,ASME,"ASME Y14.32.1M Chassis Frames-Passenger Car and Light Truck-Ground Vehicle Practices "
2003,ASME,"ASME B30.16 Overhead Hoists "
1972,ASME,"ASME B27.6 General Purpose Uniform Cross Section Spiral Retaining Rings "
2008,ASME,"ASME Y14.44 Reference Designations for Electrical and Electronics Parts and Equipment "
1994,ASME,"ASME Y14.5.1M Mathematical Definition of Dimensioning and Tolerancing Principles "
2010,ASME,"ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts "
1978,ASME,"ASME Y14.7.2 Gear and Spline Drawing Standards-Part 2: Bevel and Hypoid Gears "
1973,ASME,"ASME B1.9 Buttress Inch Screw Threads "
2004,ASME,"ASME B30.1 Jacks "
2005,ASME,"ASME Y14.1M Metric Drawing Sheet Size and Format "
2005,ASME,"ASME B5.54 Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers "
2005,ASME,"ASME B107.4 Driving and Spindle Ends for Portable Hand, Impact, Air and Electric Tools "
1994,ASME,"ASME Y14.5 Dimensioning and Tolerancing "
2005,ASME,"ASME B1.13M Metric Screw Threads: M Profile "
2011,ASME,"ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300) "
1984,ASME,"ASME B1.16M Gages and Gaging for Metric M Screw Threads "
2001,ASME,"ASME B18.12 Glossary of Terms for Mechanical Fasteners "
1999,ASME,"ASME Y14.24 Types and Applications of Engineering Drawings "
1987,ASME,"ASME B1.12M Class 5 Interference-Fit Thread "
2009,ASME,"ASME Y14.5 Dimensioning and Tolerancing "
2001,ASME,"ASME B18.2.3.9M Metric Heavy Hex Flange Screws "
1983,ASME,"ASME B18.1.3M Metric Small Solid Rivets "
1985,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue "
1978,ASME,"ASME B4.2 Preferred Metric Limits and Fits "
1991,ASME,"ASME B1.20.5 Gaging for Dryseal Pipe Threads-Inch "
2004,ASME,"ASME B30.5 Mobile and Locomotive Cranes "
2001,ASME,"ASME Y14.6 Screw Thread Representation "
1971,ASME,"ASME Y14.7.1 Gear Drawing Standards-Parts 1: For Spur, Helical, Double Helical and Rack "
1972,ASME,"ASME B89.3.1 Measurement of Out-of-Roundness "
2007,ASME,"ASME A17.1 Handbook on Safety Code for Elevators and Escalators "
2003,ASME,"ASME B30.17 Overhead and Gantry Cranes "
2003,ASME,"ASME Y14.3 Multiview and Sectional View Drawings "
2010,ASME,"ASME B107.17 Gages and Mandrels for Wrench Openings "
2007,ASME,"ASME B47.1 Gage Blanks "
2005,ASME,"ASME Y14.1 Decimal Inch Drawing Sheet Size and Format "
1997,ASME,"ASME B1.5 Acme Screw Threads"
2000,ASME,"ASME Y14.5.2 Certification of Geometric Dimensioning and Tolerancing Professionals "
1972,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue "
2009,ASME,"ASME Y14.8 Casting, Forgings, and Molded Parts "
2003,ASME,"ASME B30.9 Slings "
1985,ASME,"ASME B1.22M Gages and Gaging for MJ Metric Screw Threads "
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets "
2010,ASME,"ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws "
2003,ASME,"ASME Y14.41 Digital Product Definition Data Practices "
1994,ASME,"ASME B5.11 Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads "
2003,ASME,"ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures "
2011,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges & Flanged Fittings: Class 150,300,400,600,900,1500 & 2500 "
1997,ASME,"ASME B107.17M Gages, Wrench Openings, Reference "
2011,ASME,"ASME B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes "
1998,ASME,"ASME B16.4 Gray Iron Threaded Fittings "
2008,ASME,"ASME Y14.31 Undimensioned Drawings "
1988,ASME,"ASME B1.8-1988 Stub Acme Screw Threads "
2010,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines "
1985,ASME,"ASME B18.15 Forged Eyebolts "
1995,ASME,"ASME B107.4 Driving & Spindle Ends For Portable Hand, Impact, Air & Electric Tools -Percussion Tools Excluded "
2012,ASME,"ASME B18.12 Glossary of Terms for Mechanical Fasteners"
2011,ASME,"ASME B29.1 Precision Power Transmission Roller Chains, Attachments, and Sprockets"
2011,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2012,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (for Plumbing Fixtures and Water-Connected Receptors)"
2005,ASME,"ASME B1.13M Metric Screw Threads: M Profile"
2012,ASME,"ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2012,ASME,"ASME B16.25 Buttwelding Ends"
2012,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
2012,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2)"
2012,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum"
1996,ASME,"ASME B18.13 Screw and Washer Assemblies-Sems (Inch Series)"
2012,ASME,"ASME B18.5 Round Head Bolts (Inch Series)"
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets"
2012,ASME,"ASME B20.1 Safety Standard for Conveyors and Related Equipment"
2012,ASME,"ASME B30.16 Overhead Hoists (Underhung)"
2006,ASME,"ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)"
2012,ASME,"ASME B31.1 Power Piping"
2010,ASME,"ASME B31.3 ES Tuber"
2012,ASME,"ASME B31.4 Pipeline Transportation Systems for Liquid and Slurries"
2012,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2010,ASME,"ASME B31.8S ES Gesti"
2012,ASME,"ASME CSD-1 Controls and Safety Devices for Automatically Fired Boilers"
2012,ASME,"ASME HST-1 Performance Standard for Electric Chain Hoists"
2012,ASME,"ASME Y14.37 Composite Part Drawings"
2012,ASME,"ASME Y14.41 Digital Product Definition Data Practices"
1994,ASME,"ASME Y14.5.1M Mathematical Definition of Dimensioning and Tolerancing Principles"
2013,ASME,"ASME B16.34 Valves - Flanged, Threaded, and Welding End"
2012,ASME,"ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)"
2012,ASME,"ASME B18.3 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)"
2004,ASME,"ASME PTC 19.5 Flow Measurement"
2012,ASME,"ASME Y14.1M Metric Drawing Sheet Size and Format"
2012,ASME,"ASME Y14.24 Types and Applications of Engineering Drawings"
1987,ASME,"ASME B1.12 Class 5 Interference-Fit Thread - Reaffirmed 2013"
1976,ASME,"ASME B1.20.3 Dryseal Pipe Threads,Inch - Reaffirmed 2013"
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads, Inch - Reaffirmed 2013"
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile - Reaffirmed 2013"
2012,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed"
2013,ASME,"ASME B16.26  Cast Copper Alloy Fittings for Flared Copper Tubes"
2013,ASME,"ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems"
2013,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard"
1967,ASME,"ASME B17.1 Keys and Keyseats - Reaffirmed 2013"
1967,ASME,"ASME B17.2 Woodruff Keys and Keyseats - Reaffirmed 2013"
1996,ASME,"ASME B18.13 Screw and Washer Assemblies-Sems (Inch Series) - Reaffirmed 2013"
2013,ASME,"ASME B31.5 Refrigeration Piping and Heat Transfer Components"
1994,ASME,"ASME B5.10 Machine Tapers-Self Holding and Steep Taper Series - Reaffirmed 2013"
2013,ASME,"ASME CA-1 Conformity Assessment Requirements"
2013,ASME,"ASME Y14.100 Engineering Drawing Practices"
2012,ASME,"ASME Y14.3 Orthographic and Pictorial Views"
2007,ASME,"ASME Y14.38 Abbreviations and Acronyms for Use on Drawings and Related Documents - Reaffirmed 2013"
2001,ASME,"ASME Y14.6 Screw Thread Representation - Reaffirmed 2013"
2012,ASME,"ASME B31.3 Process Piping"
2013,ASME,"ASME A17.1 / CSA B44 Safety Code for Elevators and Escalators"
2013,ASME,"ASME B16.15 Cast Copper Alloy Threaded Fittings: Classes 125 and 250"
1999,ASME,"ASME B18.21.2M Lock Washers (Metric Series) - Reaffirmed 2014"
2014,ASME,"ASME B31.9 Building Services Piping"
2013,ASME,"ASME B40.100 Pressure Gauges and Gauge Attachments"
2013,ASME,"ASME Y14.34 Associated Lists"
2007,ASME,"ASME A13.1 Scheme for the Identification of Piping Systems -  Reaffirmed: 2013"
2013,ASME,"ASME A17.1/CSA B44 Handbook on Safety Code for Elevators and Escalators"
1997,ASME,"ASME B1.5 Acme Screw Threads - Reaffirmed: 2014"
2001,ASME,"ASME B18.2.3.9M Metric Heavy Hex Flange Screws - Reaffirmed: 2014"
2014,ASME,"ASME B30.10 Hooks"
2014,ASME,"ASME B31.1 Power Piping"
2008,ASME,"ASME B40.200 Thermometers, Direct Reading and Remote Reading - Reaffirmed: 2013"
1972,ASME,"ASME B5.18 Spindle Noses and Tool Shanks for Milling Machines - Reaffirmed: 2014"
1985,ASME,"ASME B5.1M T-Slots, Their Bolts, Nuts and Tongue - Reaffirmed: 2014"
1984,ASME,"ASME B94.6 Knurling - Reaffirmed: 2014"
1997,ASME,"ASME PTC 10 Performance Test Code on Compressors and Exhausters - Reaffirmed: 2014"
2008,ASME,"ASME PTC 19.11 Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle - Reaffirmed: 2013"
2014,ASME,"ASME Y14.31 Undimensioned Drawings"
2009,ASME,"ASME Y14.8 Casting, Forgings, and Molded Parts  - Reaffirmed: 2014"
1991,ASME,"ASME B1.20.5 Gaging for Dryseal Pipe Threads-Inch - Reaffirmed: 2014"
2009,ASME,"ASME B16.12 Cast Iron Threaded Drainage Fittings - Reaffirmed: 2014"
2014,ASME,"ASME B16.39 Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300"
2014,ASME,"ASME B30.5 Mobile and Locomotive Cranes"
2014,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2014,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines"
2014,ASME,"ASME Y14.35 Revision of Engineering Drawings and Associated Documents"
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) - Reaffirmed: 2012"
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols - Reaffirmed: 2011"
2014,ASME,"ASME B30.9 Slings"
2014,ASME,"ASME B31.3 Process Piping"
2014,ASME,"ASME Y14.2 Line Conventions and Lettering"
2005,ASME,"ASME B1.13M - 2005: Metric Screw Threads: M Profile - Reaffirmed 2015"
2015,ASME,"ASME B107.17 - 2015: Gages and Mandrels for Wrench Openings"
2015,ASME,"ASME B16.36 - 2015: Orifice Flanges"
2015,ASME,"ASME B18.15 - 2015: Forged Eyebolts"
2015,ASME,"ASME B30.1 - 2015: Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries"
2015,ASME,"ASME B30.8 - 2015: Floating Cranes and Floating Derricks"
2015,ASME,"ASME B36.10M - 2015: Welded and Seamless Wrought Steel Pipe"
2004,ASME,"ASME B36.19M - 2004: Stainless Steel Pipe - Reaffirmed 2015"
2005,ASME,"ASME B5.54 - 2005: Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers - Reaffirmed 2015"
2015,ASME,"ASME PTC 1 - 2015: General Instructions"
2016,ASME,"ASME A112.6.3 - 2016: Floor and Trench Drains"
2015,ASME,"ASME A13.1 - 2015: Scheme for the Identification of Piping Systems"
2005,ASME,"ASME B107.4 - 2005: Driving and Spindle Ends for Portable Hand, Impact, Air and Electric Tools (Percussion Tools Excluded) - Reapproved 2011"
2015,ASME,"ASME B16.1 - 2015: Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250"
2015,ASME,"ASME B18.2.2 - 2015: Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)"
2015,ASME,"ASME B18.24 - 2015: Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
1981,ASME,"ASME B18.6.1 - 1981: Wood Screws (Inch Series) - Reapproved 2016"
2015,ASME,"ASME B20.1 - 2015: Safety Standard for Conveyors and Related Equipment"
2015,ASME,"ASME B30.17 - 2015: Cranes and Monorails (With Underhung Trolley or Bridge)"
2016,ASME,"ASME B30.22 - 2016: Articulating Boom Cranes"
2016,ASME,"ASME B31.1 - 2016: Power Piping"
2016,ASME,"ASME B31.4 - 2016: Pipeline Transportation Systems for Liquids and Slurries"
2016,ASME,"ASME B31.5 - 2016: Refrigeration Piping and Heat Transfer Components"
2015,ASME,"ASME CSD-1 - 2015: Controls and Safety Devices for Automatically Fired Boilers"
2016,ASME,"ASME HST-4 - 2016: Performance Standard for Overhead Electric Wire Rope Hoists"
2016,ASME,"ASME A17.1 Safety Code for Elevators and Escalators"
1984,ASME,"ASME B1.16M Gages and Gaging for Metric M Screw Threads"
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads"
1985,ASME,"ASME B1.22M Gages and Gaging for MJ Metric Screw Threads"
2007,ASME,"ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)"
2006,ASME,"ASME B1.7 Screw Threads: Nomenclature, Definitions, and Letter Symbols"
1988,ASME,"ASME B1.8 Stub Acme Screw Threads"
2016,ASME,"ASME B16.11 Forged Fittings, Socket-Welding and Threaded"
2016,ASME,"ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges"
2016,ASME,"ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWV"
2016,ASME,"ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500"
2016,ASME,"ASME B16.3 Malleable Iron Threaded Fittings: Classes 150 and 300"
2016,ASME,"ASME B16.4 Gray Iron Threaded Fittings: Classes 125 and 250"
2016,ASME,"ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300"
1983,ASME,"ASME B18.1.3M Metric Small Solid Rivets"
2006,ASME,"ASME B18.10 Track Bolts and Nuts"
2011,ASME,"ASME B18.13.1M Screw and Washer Assemblies: SEMS (Metric Series)"
2017,ASME,"ASME B18.13 Screw and Washer Assemblies--SEMS (Inch Series)"
2009,ASME,"ASME B18.21.1 Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)"
1998,ASME,"ASME B18.27 Tapered and Reduced Cross Section Retaining Rings (Inch Series)"
1972,ASME,"ASME B27.6 General Purpose Uniform Cross Section Spiral Retaining Rings"
2011,ASME,"ASME B29.100 Double-Pitch Roller Chains, Attachments, and Sprockets"
2011,ASME,"ASME B29.1 Precision Power Transmission Roller Chains, Attachments, and Sprockets"
2016,ASME,"ASME B31.3 Process Piping"
2016,ASME,"ASME B31.8 Gas Transmission and Distribution Piping Systems"
2016,ASME,"ASME B31.8S Managing System Integrity of Gas Pipelines"
2016,ASME,"ASME A17.1 Handbook on Safety Code for Elevators and Escalators"
2012,ASME,"ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)"
1997,ASME,"ASME A112.6.1M Supports for Off-the-Floor Plumbing Fixtures for Public Use"
1991,ASME,"ASME A112.36.2M Cleanouts"
1983,ASME,"ASME B1.2 Gages and Gaging for Unified Inch Screw Threads"
1992,ASME,"ASME B1.3M Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)"
1973,ASME,"ASME B1.9-1973 Buttress Inch Screw Threads 7 deg./45 deg. Form with 0.6 Pitch Basic Height of Thread Engagement"
2017,ASME,"ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard"
2017,ASME,"ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves"
2018,ASME,"ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings"
2017,ASME,"ASME B16.20 Metallic Gaskets for Pipe Flanges"
2017,ASME,"ASME B16.25 Buttwelding Ends"
2017,ASME,"ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings—DWV"
2012,ASME,"ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2)"
2017,ASME,"ASME B16.34 Valves Flanged, Threaded, and Welding End"
2012,ASME,"ASME B16.38 Large Metallic Valves for Gas Distribution: Manual Operated,NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum"
2012,ASME,"ASME B18.5 Round Head Bolts"
2007,ASME,"ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets"
1977,ASME,"ASME B27.7 General Purpose Tapered and Reduced Cross Section Retaining Rings (Metric)"
2016,ASME,"ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)"
2018,ASME,"ASME B30.9 Slings"
2017,ASME,"ASME B30.16 Overhead Underhung and Stationary Hoists"
2017,ASME,"ASME B31.9 Building Services Piping"
2017,ASME,"ASME HST-3 Performance Standard for Lever Hoists"
2017,ASME,"ASME Y14.5.2 Certification of Geometric Dimensioning and Tolerancing Professionals"
2017,ASME,"ASME Y14.46 Product Definition for Additive Manufacturing [Draft Standard for Trial Use]"
2017,ASME,"ASME Y14.100 Engineering Drawing Practices"
2003,ASME,"ASME B1.1 Unified Inch Screw Threads, (UN and UNR Thread Form) - Reaffirmed 2018"
1987,ASME,"ASME B1.12 Class 5 Interference-Fit Thread - Reaffirmed 2018"
1991,ASME,"ASME B1.20.7 Hose Coupling Screw Threads, Inch - Reaffirmed 2018"
1997,ASME,"ASME B1.21M Metric Screw Threads: MJ Profile - Reaffirmed 2018"
2014,ASME,"ASME B30.5 Mobile and Locomotive Cranes - Reaffirmed 2018"
2012,ASME,"ASME HST1 Performance Standard for Electric Chain Hoists - Reaffirmed 2018"
2018,ASME,"ASME B16.15-2018 Cast Copper Alloy Threaded Fittings: Classes 125 and 250"
2018,ASME,"ASME B16.22 - 2018 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2018,ASME,"ASME B16.26 - 2018 Cast Copper Alloy Fittings for Flared Copper Tubes"
2018,ASME,"ASME B20.1 - 2018 Safety Standard for Conveyors and Related Equipment"
2018,ASME,"ASME B36.10M - 2018 Welded and Seamless Wrought Steel Pipe"
2018,ASME,"ASME B36.19M - 2018 Stainless Steel Pipe"
2018,ASME,"ASME CSD-1 - 2018 Controls and Safety Devices for Automatically Fired Boilers"
2013,ASME,"ASME Y14.34 - 2013 Reapproved 2018 Associated Lists"
2012,ASME,"ASME B16.9 - 2012 (R2018) Factory-Made Wrought Buttwelding Fittings"
2016,ASME,"ASME B31.8 - 2016 (R2018) Gas Transmission and Distribution Piping Systems"
2016,ASME,"ASME B31.8S - 2016 (R2018) Managing System Integrity of Gas Pipelines"
2008,ASME,"ASME Y14.36 - 2008 (R2018) Surface Texture Symbols"
2018,ASME,"ASME AED-1 - 2018: Aerospace and Advanced Engineering Drawings"
2013,ASME,"ASME B1.20.1 - 2013: Pipe Threads, General Purpose, Inch - Reaffirmed 2018"
1976,ASME,"ASME B1.20.3 - 1976: Dryseal Pipe Threads,Inch - Reaffirmed 2018"
2019,ASME,"ASME B16.40 - 2019: Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems"
2016,ASME,"ASME B31.8 - 2016: Sistemas de Tuberías de Distribución y Transporte de Gas [Spanish Translation of ASME B31.8-2016]"
2018,ASME,"ASME Y14.5 - 2018: Dimensioning and Tolerancing"
2019,ASME,"ASME A112.6.3 - 2019: Floor and Trench Drains"
2019,ASME,"ASME B107.4-2019: Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded)"
2004,ASME,"ASME PTC 19.5-2004 (R2013): Application, Part II of Fluid Meters: Interim Supplement on Instruments and Apparatus"
2012,ASME,"ASME Y14.3-2012 (R2018): Orthographic and Pictorial Views - Engineering Drawing and Related Documentation Practices"
2019,ASME,"ASME Y14.47-2019: Model Organization Practices: Engineering Product Definition and Related Documentation Practices"
2009,ASME,"ASME Y14.5-2009: Dimensiones y Tolerancias"
1991,ASME,"ASME B1.20.5-1991 - Gaging for Dryseal Pipe Threads-Inch - Reapproved 2019"
2019,ASME,"ASME B16.12-2019 - Cast Iron Threaded Drainage Fittings"
1997,ASME,"ASME B29.10M-1997 - Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth - Reapproved 2019"
2019,ASME,"ASME B30.10-2019 - Hooks"
2018,ASME,"ASME B31.3-2018 - Process Piping"
2019,ASME,"ASME B31.4-2019 - Pipeline Transportation Systems for Liquids and Slurries"
2019,ASME,"ASME Y14.37-2019 - Product Definition for Composite Parts"
2019,ASME,"ASME Y14.41-2019 - Digital Product Definition Data Practices"
2019,ASME,"ASME A17.1-2019/CSA B44:19 Safety Code for Elevators and Escalators"
2005,ASME,"ASME A17.1S-2005 Supplement to Safety Code for Elevators and Escalators"
2019,ASME,"ASME B1.1-2019: Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)"
2005,ASME,"ASME B1.13M-2005 (R2020): Metric Screw Threads: M Profile"
2020,ASME,"ASME B107.17-2020: Gages and Mandrels for Wrench Opening"
2019,ASME,"ASME B16.39-2019: Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300"
2020,ASME,"ASME B18.12-2020: Glossary of Terms for Mechanical Fasteners"
2001,ASME,"ASME B18.2.3.9M-2001 (R2020): Metric Heavy Hex Flange Screws"
2020,ASME,"ASME B31.1-2020: Power Piping"
2019,ASME,"ASME B31.5-2019: Refrigeration Piping and Heat Transfer Components"
2019,ASME,"ASME B46.1-2019: Surface Texture (Surface Roughness, Waviness, and Lay)"
2005,ASME,"ASME B5.54-2005 (R2020): Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers"
2014,ASME,"ASME Y14.2-2014 (R2020): Line Conventions and Lettering"
2019,ASME,"ASME Y14.38-2019: Abbreviations and Acronyms for Use in Product Definition and Related Documents: Engineering Product Definition and Related Documentation Practices"
2019,ASME,"ASME Y14.5.1-2019: Mathematical Definition of Dimensioning and Tolerancing Principles"
2018,ASME,"ASME B31.1 - 2018: Power Piping"
2020,ASME,"ASME A13.1 - 2020 Scheme for the Identification of Piping Systems"
2020,ASME,"ASME B16.1 - 2020 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250"
2020,ASME,"ASME B18.24 - 2020 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
2020,ASME,"ASME B31.9 - 2020 Building Services Piping"
1967,ASME,"ASME B4.1 - 1967(R2020) Preferred Limits and Fits for Cylindrical Parts"
1978,ASME,"ASME B4.2 - 1978(R2020) Preferred Metric Limits and Fits"
2020,ASME,"ASME CA-1 - 2020 Conformity Assessment Requirements"
2020,ASME,"ASME Y14.1 - 2020 Decimal Inch Drawing Sheet Size and Format"
2020,ASME,"ASME Y14.24 - 2020 Types and Applications of Engineering Drawings"
2011,ASME,"ASME Y14.43 - 2011(R2020) Dimensioning and Tolerancing Principles for Gages and Fixtures"
2020,ASME,"ASME B16.36 - 2020: Orifice Flanges"
2020,ASME,"ASME B18.6.2 - 2020: Square Head Set Screws and Slotted Headless Set Screws (Inch Series)"
2020,ASME,"ASME B16.34-2020 Valves Flanged, Threaded and Welding End"
2020,ASME,"ASME B16.5-2020 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24, Metric/Inch Standard"
2020,ASME,"ASME B30.1-2020 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries"
2014,ASME,"ASME Y14.31 - 2014 (R2019) Undimensioned Drawings"
2020,ASME,"ASME B30.8-2020 Floating Cranes and Floating Derricks"
2020,ASME,"ASME B30.17-2020 Cranes and Monorails (With Underhung Trolley or Bridge)"
2006,ASME,"ASME B1.7 - 2006(R2016) Screw Threads: Nomenclature, Definitions, and Letter Symbols"
1988,ASME,"ASME B1.8 - 1988(R2016) Stub Acme Screw Threads"
2020,ASME,"ASME B31.3 - 2020 Process Piping"
2020,ASME,"ASME B31.8 - 2020 Gas Transmission and Distribution Piping Systems"
2020,ASME,"ASME B31.8S - 2020 Managing System Integrity of Gas Pipelines"
2013,ASME,"ASME A17.1 / CSA B44 - 2013 Safety Code for Elevators and Escalators with February 2021 ERRATA"
2016,ASME,"ASME A17.1 / CSA B44 - 2016 Safety Code for Elevators and Escalators with February 2021 ERRATA"
2019,ASME,"ASME A17.1/CSA B44 Handbook - 2019 Handbook on Safety Code for Elevators and Escalators"
2021,ASME,"ASME B20.1 - 2021 Safety Standard for Conveyors and Related Equipment"
1983,ASME,"ASME B18.1.3M - 1983(R2021) Metric Small Solid Rivets"
2006,ASME,"ASME B18.10 - 2006(R2021) Track Bolts and Nuts"
2015,ASME,"ASME B18.15 - 2015(R2021) Forged Eyebolts"
2021,ASME,"ASME B30.5 - 2021 Mobile and Locomotive Cranes"
2021,ASME,"ASME CSD-1 - 2021 Controls and Safety Devices for Automatically Fired Boilers"
2012,ASME,"ASME B18.2.1 - 2012(R2021) Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)"
2011,ASME,"ASME B29.100 - 2011(R2021) Double-Pitch Roller Chains, Attachments, and Sprockets"
2021,ASME,"ASME B30.9 - 2021 Slings"
2021,ASME,"ASME HST-4 - 2021 Performance Standard for Overhead Electric Wire Rope Hoists"
2021,ASME,"ASME Y14.45 - 2021 Measurement Data Reporting"
2021,ASME,"ASME B16.21 - 2021 Nonmetallic Flat Gaskets for Pipe Flanges"
2021,ASME,"ASME B16.3 - 2021 Malleable Iron Threaded Fittings: Classes 150 and 300"
2021,ASME,"ASME B16.4 - 2021 Gray Iron Threaded Fittings: Classes 125 and 250"
2021,ASME,"ASME B16.42 - 2021 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300"
2011,ASME,"ASME B18.13.1M - 2011 (R2022) Screw and Washer Assemblies: SEMS (Metric Series)"
2017,ASME,"ASME B18.13 - 2017 (R2022) Screw and Washer Assemblies--SEMS (Inch Series)"
2011,ASME,"ASME B29.1 - 2011 (R2022) Precision Power Transmission Roller Chains, Attachments, and Sprockets"
2021,ASME,"ASME B16.18 - 2021 Cast Copper Alloy Solder Joint Pressure Fittings"
2022,ASME,"ASME B18.2.2 - 2022 Nuts for General Applications: Machine Screw Nuts; and Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)"
2007,ASME,"ASME B1.3 - 2007(R2022) - Screw Thread Gaging Systems for Acceptability: Inch & Metric Screw Threads (UN,UNR,UNJ,M,MJ)"
2021,ASME,"ASME B16.22 - 2021 - Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings"
2021,ASME,"ASME B16.23 - 2021 - Cast Copper Alloy Solder Joint Drainage Fittings: DWV"
2022,ASME,"ASME B30.16 - 2022 - Overhead Underhung and Stationary Hoists"
2007,ASME,"ASME B47.1 - 2007(R2022) - Gage Blanks with Errata"
2022,ASME,"ASME Y14.8 - 2022 - Castings, Forgings, and Molded Parts"
2022,ASME,"ASME B16.10-2022 - Face-to-Face and End-to-End Dimensions of Valves"
2021,ASME,"ASME B16.24-2021 - Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500"
2022,ASME,"ASME B36.10-2022 - Welded and Seamless Wrought Steel Pipe"
2022,ASME,"ASME B36.19-2022 - Welded and Seamless Wrought Stainless Steel Pipe"
2022,ASME,"ASME PTC 1-2022 - General Instructions Performance"
2022,ASME,"ASME Y14.46-2022 - Product Definition for Additive Manufacturing"
2012,ASME,"ASME A112.1.2-2012 (R2022) Air Gaps in Plumbing Systemsfor Plumbing Fixtures and Water-Connected Receptors)"
2022,ASME,"ASME HST-3-2022 Performance Standard for Lever Hoists"
2022,ASME,"ASME A112.36.2/CSA B79.2 - 2022 Cleanouts"
2022,ASME,"ASME B30.2 - 2022 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist"
2022,ASME,"ASME A112.6.3-2022/CSA B79.3:22 Floor drains"
2021,ASME,"ASME B16.11-2021 Forged Fittings, Socket-Welding and Threaded"
2022,ASME,"ASME B31.1-2022 Power Piping"
2022,ASME,"ASME B31.3 - 2022 - Process Piping"
2022,ASME,"ASME B31.4 - 2022 - Pipeline Transportation Systems for Liquids and Slurries"
2022,ASME,"ASME B31.5 - 2022 - Refrigeration Piping and Heat Transfer Components"
2022,ASME,"ASME B31.8 - 2022 - Gas Transmission and Distribution Piping Systems"
2022,ASME,"ASME B31.8S - 2022 - Managing System Integrity of Gas Pipelines"
2022,ASME,"ASME B40.100 - 2022 - Pressure Gauges and Gauge Attachments"
2022,ASME,"ASME B16.10 - 2022 with Errata: Face-to-Face and End-to-End Dimensions of Valves"
2012,ASME,"ASME B18.5 - 2012(R2023): Round Head Bolts (Inch Series)"
2022,ASME,"ASME B31.3 - 2022 with Errata: Process Piping"
2022,ASME,"ASME CA-1 - 2022: Conformity Assessment Requirements"
2022,ASME,"ASME B16.25-2022 Buttwelding Ends"
2022,ASME,"ASME B16.29-2022 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV"
2023,ASME,"ASME B30.22-2023 Articulating Boom Cranes"
2022,ASME,"ASME B31.3-2022 Process Piping"
2022,ASME,"ASME B36.19-2022 Welded and Seamless Wrought Stainless Steel Pipe"
2023,ASME,"ASME Y14.47-2023 Model Organization Practices"
2022,ASME,"ASME A17.1/CSA B44 - 2022 Safety Code for Elevators and Escalators"
2023,ASME,"ASME A13.1-2023 Scheme for the Identification of Piping Systems"
2023,ASME,"ASME AED-1-2023 Aerospace and Advanced Engineering Product Definition"
1976,ASME,"ASME B1.20.3-1976-R2023 Dryseal Pipe Threads,Inch"
2023,ASME,"ASME B18.24-2023 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products"
2023,ASME,"ASME HST-1-2023 Performance Standard for Electric Chain Hoists"
2022,ASME,"ASME PTC-19.5-2022 Flow Measurement"
2023,ASME,"ASME B16.38-2023 Large Metallic Valves for Gas Distribution"
2023,ASME,"ASME B16.20-2023 Metallic Gaskets for Pipe Flanges"
2024,ASME,"ASME B16.33-2024 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi"