2007,ASTM,"D1308-02(2007) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes"
2008,ASTM,"D1475-98(2008) Standard Test Method For  Density of Liquid Coatings, Inks, and Related Products"
2008,ASTM,"D1653-03(2008) Standard Test Methods for Water Vapor Transmission of Organic Coating Films"
2005,ASTM,"D3363-05 Standard Test Method for Film Hardness by Pencil Test"
2003,ASTM,"D5011-92(2003) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards"
2009,ASTM,"D5011-92(2009) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards"
2004,ASTM,"D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry"
2008,ASTM,"D522-93a(2008) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings"
2008,ASTM,"D523-08 Standard Test Method for  Specular Gloss"
2008,ASTM,"D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer"
2003,ASTM,"D950-03 Standard Test Method for Impact Strength of Adhesive Bonds"
2007,ASTM,"E595-07 Standard Test Method for  Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment"
2006,ASTM,"E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis"
2005,ASTM,"E96/E96M-05 Standard Test Methods for Water Vapor Transmission of Materials"
2002,ASTM,"F1842-02 Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications"
2009,ASTM,"D149-09 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies"
2006,ASTM,"D1006-01(2006) Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood"
2008,ASTM,"D1084-08 Standard Test Methods for Viscosity of Adhesives"
2005,ASTM,"D1144-99(2005) Standard Practice for Determining Strength Development of Adhesive Bonds"
2006,ASTM,"D1151-00(2006) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds"
2007,ASTM,"D1218-02(2007) Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids"
2006,ASTM,"D1259-06 Standard Test Methods for Nonvolatile Content of Resin Solutions"
2005,ASTM,"D1304-99(2005) Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation"
2006,ASTM,"D1316-06 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer"
2008,ASTM,"D1474-98(2008) Standard Test Methods for  Indentation Hardness of Organic Coatings"
2004,ASTM,"D150-98(2004) Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation"
2004,ASTM,"D1652-04 Standard Test Method for Epoxy Content of Epoxy Resins"
2009,ASTM,"D1747-09 Standard Test Method for Refractive Index of Viscous Materials"
2009,ASTM,"D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products"
2006,ASTM,"D2094-00(2006) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests"
2007,ASTM,"D2134-93(2007) Standard Test Method for  Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker"
2005,ASTM,"D2556-93a(2005) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties"
2007,ASTM,"D257-07 Standard Test Methods for DC Resistance or Conductance of Insulating Materials"
2009,ASTM,"D2979-01(2009) Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine"
2006,ASTM,"D3125-06 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid"
2004,ASTM,"D332-87(2004) Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation"
2005,ASTM,"D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings"
2004,ASTM,"D3807-98(2004) Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)"
2008,ASTM,"D387-00(2008) Standard Test Method for  Color and Strength of Chromatic Pigments with a Mechanical Muller"
2009,ASTM,"D4039-09 Standard Test Method for Reflection Haze of High-Gloss Surfaces"
2007,ASTM,"D4092-07 Standard Terminology:  Plastics:  Dynamic Mechanical Properties"
2001,ASTM,"D4142-89(2001) Standard Guide for Testing Epoxy Resins"
2005,ASTM,"D4274-05 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols"
2004,ASTM,"D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend"
2007,ASTM,"D4339-01(2007) Standard Test Method for Determination of the Odor of Adhesives"
2009,ASTM,"D4361-09 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter"
2008,ASTM,"D4662-08  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2004,ASTM,"D5264-98(2004) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester"
2006,ASTM,"D5402-06 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs"
2007,ASTM,"D5403-93(2007) Standard Test Methods for Volatile Content of Radiation Curable Materials"
2006,ASTM,"D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics"
2008,ASTM,"D6165-97(2008) Standard Guide for the  Comparison, Detection, and Identification of the Odors of Paints, Inks,  and Related Materials"
2008,ASTM,"D6342-08 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
2008,ASTM,"D897-08 Standard Test Method for  Tensile Properties of Adhesive Bonds"
2004,ASTM,"D971-99a(2004) Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method"
2008,ASTM,"E1356-08 Standard Test Method for Assignment of the  Glass Transition Temperatures by Differential Scanning Calorimetry"
2005,ASTM,"E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis"
2009,ASTM,"E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis"
2007,ASTM,"F739-07 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact"
2006,ASTM,"G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer"
2010,ASTM,"D1210-05(2010) Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage"
2010,ASTM,"D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser"
2009,ASTM,"D4142-89(2009) Standard Guide for Testing Epoxy Resins"
2010,ASTM,"D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing"
2009,ASTM,"D4252-89(2009) Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates"
2009,ASTM,"D5181-09 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester"
2010,ASTM,"D4040-10 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer"
2008,ASTM,"D1044-08 Standard Test Method for  Resistance of Transparent Plastics to Surface Abrasion"
2010,ASTM,"D1200-10 Standard Test Method for Viscosity by Ford Viscosity Cup"
2010,ASTM,"D1544-04(2010) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)"
2008,ASTM,"D2095-96(2008) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens"
2010,ASTM,"D2196-10 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer"
2010,ASTM,"D2197-10 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion"
2008,ASTM,"D3658-01(2008) Standard Test Method for  Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal    Adhesive Joints"
2010,ASTM,"D4145-10 Standard Test Method for Coating Flexibility of Prepainted Sheet"
2010,ASTM,"D4212-10 Standard Test Method for Viscosity by Dip-Type Viscosity Cups"
2010,ASTM,"D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2010,ASTM,"D638-10 Standard Test Method for Tensile Properties of Plastics"
2010,ASTM,"D882-10 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2008,ASTM,"D904-99(2008) Standard Practice for  Exposure of Adhesive Specimens to Artificial Light"
2010,ASTM,"D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry"
2010,ASTM,"D903-98(2010) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds"
1999,ASTM,"D257-99 Standard Test Methods for DC Resistance or Conductance of Insulating Materials"
2011,ASTM,"D332-87(2011) Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation"
2001,ASTM,"D897-01 Standard Test Method for Tensile Properties of Adhesive Bonds"
2008,ASTM,"D905-08e1 Standard Test Method for  Strength Properties of Adhesive Bonds in Shear by Compression Loading"
2003,ASTM,"E595-93(2003)e2 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment"
1997,ASTM,"D1084-97 Standard Test Methods for Viscosity of Adhesives"
2009,ASTM,"D3359-09e2 Standard Test Methods for  Measuring Adhesion by Tape Test"
2004,ASTM,"D4039-93(2004) Standard Test Method for Reflection Haze of High-Gloss Surfaces"
1999,ASTM,"D4039-93(1999) Standard Test Method for Reflection Haze of High-Gloss Surfaces"
2008,ASTM,"D5010-08a Standard Guide for Testing Printing Inks and Related Materials"
2008,ASTM,"D5010-08 Standard Guide for Testing Printing Inks and Related Materials"
2005,ASTM,"D5010-05 Standard Guide for Testing Printing Inks and Related Materials"
2003,ASTM,"D5010-03e1 Standard Guide for Testing Printing Inks and Related Materials"
2003,ASTM,"D5010-03 Standard Guide for Testing Printing Inks and Related Materials"
2001,ASTM,"D5010-01e1 Standard Guide for Testing Printing Inks and Related Materials"
2001,ASTM,"D5010-01 Standard Guide for Testing Printing Inks and Related Materials"
2000,ASTM,"D5010-00a Standard Guide for Testing Printing Inks and Related Materials"
2012,ASTM,"F739-12 Standard Test Method for  Permeation of Liquids and Gases through Protective Clothing  Materials under Conditions of Continuous Contact"
2012,ASTM,"D1475-98(2012) Standard Test Method For  Density of Liquid Coatings, Inks, and Related Products"
2012,ASTM,"F739-12 Standard Test Method for  Permeation of Liquids and Gases through Protective Clothing  Materials under Conditions of Continuous Contact (Redline)"
2012,ASTM,"D6342-12 Standard Practice for  Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy (Redline)"
2012,ASTM,"G130-12 Standard Test Method for  Calibration of Narrow- and Broad-Band Ultraviolet Radiometers  Using a Spectroradiometer"
2012,ASTM,"G130-12 Standard Test Method for  Calibration of Narrow- and Broad-Band Ultraviolet Radiometers  Using a Spectroradiometer (Redline)"
1997,ASTM,"D882-97 Standard Test Method for Tensile Properties of Thin Plastic Sheeting"
2013,ASTM,"D904-99(2013) Standard Practice for Exposure of Adhesive Specimens to Artificial Light"
2013,ASTM,"D1006/D1006M-13 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood (Redline)"